Advertisement
Guest User

Untitled

a guest
Mar 27th, 2013
168
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.14 KB | None | 0 0
  1. smartctl -a /dev/sdb
  2. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-0.bpo.4-amd64] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Western Digital Caviar Blue Serial ATA
  7. Device Model: WDC WD2500AAJS-22RYA0
  8. Serial Number: WD-WCAPZ2960867
  9. LU WWN Device Id: 5 0014ee 155a8c704
  10. Firmware Version: 12.01B01
  11. User Capacity: 250 059 350 016 bytes [250 GB]
  12. Sector Size: 512 bytes logical/physical
  13. Device is: In smartctl database [for details use: -P show]
  14. ATA Version is: 7
  15. ATA Standard is: Exact ATA specification draft version not indicated
  16. Local Time is: Wed Mar 27 22:00:05 2013 MSK
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status: (0x84) Offline data collection activity
  25. was suspended by an interrupting command from host.
  26. Auto Offline Data Collection: Enabled.
  27. Self-test execution status: ( 0) The previous self-test routine completed
  28. without error or no self-test has ever
  29. been run.
  30. Total time to complete Offline
  31. data collection: ( 6180) seconds.
  32. Offline data collection
  33. capabilities: (0x7b) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 2) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 80) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 6) minutes.
  52. SCT capabilities: (0x103f) SCT Status supported.
  53. SCT Error Recovery Control supported.
  54. SCT Feature Control supported.
  55. SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
  61. 3 Spin_Up_Time 0x0003 168 153 021 Pre-fail Always - 4591
  62. 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1962
  63. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  64. 7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
  65. 9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 16942
  66. 10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
  67. 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
  68. 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1940
  69. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 137
  70. 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 1965
  71. 194 Temperature_Celsius 0x0022 111 092 000 Old_age Always - 36
  72. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  73. 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
  74. 198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
  75. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  76. 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0
  77.  
  78. SMART Error Log Version: 1
  79. ATA Error Count: 10 (device log contains only the most recent five errors)
  80. CR = Command Register [HEX]
  81. FR = Features Register [HEX]
  82. SC = Sector Count Register [HEX]
  83. SN = Sector Number Register [HEX]
  84. CL = Cylinder Low Register [HEX]
  85. CH = Cylinder High Register [HEX]
  86. DH = Device/Head Register [HEX]
  87. DC = Device Command Register [HEX]
  88. ER = Error register [HEX]
  89. ST = Status register [HEX]
  90. Powered_Up_Time is measured from power on, and printed as
  91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  93.  
  94. Error 10 occurred at disk power-on lifetime: 16346 hours (681 days + 2 hours)
  95. When the command that caused the error occurred, the device was active or idle.
  96.  
  97. After command completion occurred, registers were:
  98. ER ST SC SN CL CH DH
  99. -- -- -- -- -- -- --
  100. 40 51 00 80 7e 7a e0 Error: UNC at LBA = 0x007a7e80 = 8027776
  101.  
  102. Commands leading to the command that caused the error were:
  103. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  104. -- -- -- -- -- -- -- -- ---------------- --------------------
  105. 25 00 00 80 7e 7a 01 00 7d+04:10:30.377 READ DMA EXT
  106. 27 00 00 00 00 00 00 00 7d+04:10:30.377 READ NATIVE MAX ADDRESS EXT
  107. ec 00 00 00 00 00 00 00 7d+04:10:30.368 IDENTIFY DEVICE
  108. ef 03 46 00 00 00 00 00 7d+04:10:30.361 SET FEATURES [Set transfer mode]
  109. 27 00 00 00 00 00 00 00 7d+04:10:30.361 READ NATIVE MAX ADDRESS EXT
  110.  
  111. Error 9 occurred at disk power-on lifetime: 16346 hours (681 days + 2 hours)
  112. When the command that caused the error occurred, the device was active or idle.
  113.  
  114. After command completion occurred, registers were:
  115. ER ST SC SN CL CH DH
  116. -- -- -- -- -- -- --
  117. 40 51 00 80 7e 7a e0 Error: UNC at LBA = 0x007a7e80 = 8027776
  118.  
  119. Commands leading to the command that caused the error were:
  120. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  121. -- -- -- -- -- -- -- -- ---------------- --------------------
  122. 25 00 00 80 7e 7a 01 00 7d+04:10:27.304 READ DMA EXT
  123. 27 00 00 00 00 00 00 00 7d+04:10:27.304 READ NATIVE MAX ADDRESS EXT
  124. ec 00 00 00 00 00 00 00 7d+04:10:27.295 IDENTIFY DEVICE
  125. ef 03 46 00 00 00 00 00 7d+04:10:27.288 SET FEATURES [Set transfer mode]
  126. 27 00 00 00 00 00 00 00 7d+04:10:27.288 READ NATIVE MAX ADDRESS EXT
  127.  
  128. Error 8 occurred at disk power-on lifetime: 16346 hours (681 days + 2 hours)
  129. When the command that caused the error occurred, the device was active or idle.
  130.  
  131. After command completion occurred, registers were:
  132. ER ST SC SN CL CH DH
  133. -- -- -- -- -- -- --
  134. 40 51 00 80 7e 7a e0 Error: UNC at LBA = 0x007a7e80 = 8027776
  135.  
  136. Commands leading to the command that caused the error were:
  137. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  138. -- -- -- -- -- -- -- -- ---------------- --------------------
  139. 25 00 00 80 7e 7a 01 00 7d+04:10:24.950 READ DMA EXT
  140. 27 00 00 00 00 00 00 00 7d+04:10:24.950 READ NATIVE MAX ADDRESS EXT
  141. ec 00 00 00 00 00 00 00 7d+04:10:24.941 IDENTIFY DEVICE
  142. ef 03 46 00 00 00 00 00 7d+04:10:24.934 SET FEATURES [Set transfer mode]
  143. 27 00 00 00 00 00 00 00 7d+04:10:24.934 READ NATIVE MAX ADDRESS EXT
  144.  
  145. Error 7 occurred at disk power-on lifetime: 16346 hours (681 days + 2 hours)
  146. When the command that caused the error occurred, the device was active or idle.
  147.  
  148. After command completion occurred, registers were:
  149. ER ST SC SN CL CH DH
  150. -- -- -- -- -- -- --
  151. 40 51 00 80 7e 7a e0 Error: UNC at LBA = 0x007a7e80 = 8027776
  152.  
  153. Commands leading to the command that caused the error were:
  154. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  155. -- -- -- -- -- -- -- -- ---------------- --------------------
  156. 25 00 00 80 7e 7a 01 00 7d+04:10:22.229 READ DMA EXT
  157. 27 00 00 00 00 00 00 00 7d+04:10:22.229 READ NATIVE MAX ADDRESS EXT
  158. ec 00 00 00 00 00 00 00 7d+04:10:22.221 IDENTIFY DEVICE
  159. ef 03 46 00 00 00 00 00 7d+04:10:22.221 SET FEATURES [Set transfer mode]
  160. 27 00 00 00 00 00 00 00 7d+04:10:22.221 READ NATIVE MAX ADDRESS EXT
  161.  
  162. Error 6 occurred at disk power-on lifetime: 16346 hours (681 days + 2 hours)
  163. When the command that caused the error occurred, the device was active or idle.
  164.  
  165. After command completion occurred, registers were:
  166. ER ST SC SN CL CH DH
  167. -- -- -- -- -- -- --
  168. 40 51 00 80 7e 7a e0 Error: UNC at LBA = 0x007a7e80 = 8027776
  169.  
  170. Commands leading to the command that caused the error were:
  171. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  172. -- -- -- -- -- -- -- -- ---------------- --------------------
  173. 25 00 00 80 7e 7a 01 00 7d+04:10:19.971 READ DMA EXT
  174. 27 00 00 00 00 00 00 00 7d+04:10:19.971 READ NATIVE MAX ADDRESS EXT
  175. ec 00 00 00 00 00 00 00 7d+04:10:19.963 IDENTIFY DEVICE
  176. ef 03 46 00 00 00 00 00 7d+04:10:19.963 SET FEATURES [Set transfer mode]
  177. 27 00 00 00 00 00 00 00 7d+04:10:19.963 READ NATIVE MAX ADDRESS EXT
  178.  
  179. SMART Self-test log structure revision number 1
  180. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  181.  
  182.  
  183. SMART Selective self-test log data structure revision number 1
  184. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  185. 1 0 0 Not_testing
  186. 2 0 0 Not_testing
  187. 3 0 0 Not_testing
  188. 4 0 0 Not_testing
  189. 5 0 0 Not_testing
  190. Selective self-test flags (0x0):
  191. After scanning selected spans, do NOT read-scan remainder of disk.
  192. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement