[  105.978025] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=0, swapped=0
[  105.978069] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=0, swapped=1
[  105.978083] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=1, altmode=0
[  105.978094] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=1, altmode=0
[  106.564370] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=0, swapped=1
[  106.564407] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=0, swapped=1
[  106.564419] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=1, altmode=0
[  106.564436] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=1, altmode=0
[  106.729686] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=0, swapped=1
[  106.729721] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=0, swapped=1
[  106.730404] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=0
[  106.730421] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  107.008086] usb 5-1: new full-speed USB device number 2 using xhci-hcd
[  107.142905] usb 5-1: not running at top speed; connect to a high speed hub
[  107.146942] usb 5-1: New USB device found, idVendor=3679, idProduct=0001, bcdDevice= 0.79
[  107.146978] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  107.146993] usb 5-1: Product: USB BillBoard
[  107.147003] usb 5-1: Manufacturer: GsCooLink
[  107.147011] usb 5-1: SerialNumber: SN23456789
[  107.170619] cdc_acm 5-1:1.1: probe with driver cdc_acm failed with error -22
[  107.170660] usbcore: registered new interface driver cdc_acm
[  107.170662] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[  107.531199] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=1, swapped=1
[  107.531232] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=1, swapped=1
[  107.531245] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  107.531260] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  114.198144] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=1, swapped=1
[  114.198179] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=1, swapped=1
[  114.198191] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  114.198207] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  114.309043] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=1, swapped=1
[  114.309078] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=1, swapped=1
[  114.309093] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  114.309110] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  115.240824] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-110
[  117.023088] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=1, swapped=1
[  117.023096] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=1, swapped=1
[  117.023099] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  117.023104] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  124.102477] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=1, swapped=1
[  124.102514] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=1, swapped=1
[  124.102528] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  124.102545] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  124.424602] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-110
[  126.086534] usb 5-1: USB disconnect, device number 2
[  126.242891] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=0, altmode=1, swapped=1
[  126.242926] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=0, altmode=0, swapped=1
[  126.245428] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=0, altmode=0
[  126.245434] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=0, altmode=0
[  132.057393] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=1, altmode=0, swapped=1
[  132.057437] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=1, altmode=0, swapped=0
[  132.057451] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=1, altmode=0
[  132.057463] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=1, altmode=0
[  132.644114] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=1, altmode=0, swapped=0
[  132.644146] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=1, altmode=0, swapped=0
[  132.644160] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=1, altmode=0
[  132.644175] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=1, altmode=0
[  132.809502] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=1, altmode=0, swapped=0
[  132.809538] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=1, altmode=0, swapped=0
[  132.810548] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=0
[  132.810567] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  133.087968] usb 5-1: new full-speed USB device number 3 using xhci-hcd
[  133.221966] usb 5-1: not running at top speed; connect to a high speed hub
[  133.225631] usb 5-1: New USB device found, idVendor=3679, idProduct=0001, bcdDevice= 0.79
[  133.225674] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  133.225691] usb 5-1: Product: USB BillBoard
[  133.225702] usb 5-1: Manufacturer: GsCooLink
[  133.225712] usb 5-1: SerialNumber: SN23456789
[  133.236849] cdc_acm 5-1:1.1: probe with driver cdc_acm failed with error -22
[  133.611816] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=1, altmode=1, swapped=0
[  133.611847] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=1, altmode=1, swapped=0
[  133.611860] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  133.611876] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  140.285338] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=1, altmode=1, swapped=0
[  140.285377] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=1, altmode=1, swapped=0
[  140.285391] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  140.285409] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  140.395624] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=1, altmode=1, swapped=0
[  140.395658] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=1, altmode=1, swapped=0
[  140.395671] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  140.395687] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  141.149046] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-110
[  141.356574] usb 5-1: USB disconnect, device number 3
[  142.929545] usb1-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=0, altmode=1, swapped=0
[  142.929559] usb1-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=0, altmode=0, swapped=0
[  142.929563] usb1-sbu-mux-mux: gpio_sbu_mux_set() enter mode=0, altmode=0
[  142.929565] usb1-sbu-mux-mux: gpio_sbu_mux_set() exit mode=0, altmode=0
[  143.382253] usb 3-1: USB disconnect, device number 7
[  143.382320] usb 3-1.1: USB disconnect, device number 8
[  143.410118] usb0-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=0, altmode=0, swapped=0
[  143.410126] usb0-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=0, altmode=0, swapped=0
[  143.410130] usb0-sbu-mux-mux: gpio_sbu_mux_set() enter mode=1, altmode=0
[  143.410135] usb0-sbu-mux-mux: gpio_sbu_mux_set() exit mode=1, altmode=0
[  143.447301] usb 3-1.2: USB disconnect, device number 9
[  143.774995] usb 4-1: USB disconnect, device number 3
[  144.904736] [drm:dp_panel_read_sink_caps [msm]] *ERROR* read dpcd failed -110
[  150.284157] [drm:dp_ctrl_link_train [msm]] *ERROR* link training #1 failed. ret=-110
[  153.783344] usb0-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=0, swapped=0
[  153.783392] usb0-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=0, swapped=1
[  153.783411] usb0-sbu-mux-mux: gpio_sbu_mux_set() enter mode=1, altmode=0
[  153.783428] usb0-sbu-mux-mux: gpio_sbu_mux_set() exit mode=1, altmode=0
[  154.369800] usb0-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=0, swapped=1
[  154.369834] usb0-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=0, swapped=1
[  154.369846] usb0-sbu-mux-mux: gpio_sbu_mux_set() enter mode=1, altmode=0
[  154.369866] usb0-sbu-mux-mux: gpio_sbu_mux_set() exit mode=1, altmode=0
[  154.534611] usb0-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=0, swapped=1
[  154.534644] usb0-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=0, swapped=1
[  154.534953] usb0-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=0
[  154.534969] usb0-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  154.809832] usb 3-1: new full-speed USB device number 10 using xhci-hcd
[  154.942720] usb 3-1: not running at top speed; connect to a high speed hub
[  154.948303] usb 3-1: New USB device found, idVendor=3679, idProduct=0001, bcdDevice= 0.79
[  154.948348] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  154.948364] usb 3-1: Product: USB BillBoard
[  154.948375] usb 3-1: Manufacturer: GsCooLink
[  154.948384] usb 3-1: SerialNumber: SN23456789
[  154.959138] cdc_acm 3-1:1.1: probe with driver cdc_acm failed with error -22
[  155.335147] usb0-sbu-mux-switch: gpio_sbu_switch_set() enter orientation=2, altmode=1, swapped=1
[  155.335180] usb0-sbu-mux-switch: gpio_sbu_switch_set() exit orientation=2, altmode=1, swapped=1
[  155.335193] usb0-sbu-mux-mux: gpio_sbu_mux_set() enter mode=4, altmode=1
[  155.335207] usb0-sbu-mux-mux: gpio_sbu_mux_set() exit mode=4, altmode=1
[  157.114319] [drm:dp_panel_read_sink_caps [msm]] *ERROR* read dpcd failed -110
[  168.323878] usb 3-1: USB disconnect, device number 10