API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 6th, 2016
230
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 69.48 KB | None | 0 0
raw download clone embed print report
  1. [rxOS][outernet@skylark:/tmp/screens]$
  2. [rxOS][outernet@skylark:/tmp/screens]$ dmesg
  3. [ 0.000000] Booting Linux on physical CPU 0x0
  4. [ 0.000000] Linux version 4.4.11 (abhishek@build) (gcc version 4.9.3 (Buildroot 2016.02-git-ga08389c) ) #1 SMP 2016-01-01
  5. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] Machine model: NextThing C.H.I.P.
  8. [ 0.000000] cma: Reserved 64 MiB at 0x5b800000
  9. [ 0.000000] Memory policy: Data cache writeback
  10. [ 0.000000] On node 0 totalpages: 130733
  11. [ 0.000000] free_area_init_node: node 0, pgdat c11d20c0, node_mem_map df9ff000
  12. [ 0.000000] DMA zone: 1022 pages used for memmap
  13. [ 0.000000] DMA zone: 0 pages reserved
  14. [ 0.000000] DMA zone: 130733 pages, LIFO batch:31
  15. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  16. [ 0.000000] PERCPU: Embedded 12 pages/cpu @dfe59000 s19136 r8192 d21824 u49152
  17. [ 0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
  18. [ 0.000000] pcpu-alloc: [0] 0
  19. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129711
  20. [ 0.000000] Kernel command line: consoleblank=0 earlyprintk console=ttyS0,115200 ubi.mtd=5
  21. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. [ 0.000000] Memory: 435888K/522932K available (8275K kernel code, 1110K rwdata, 3972K rodata, 2916K init, 344K bss, 21508K reserved, 65536K cma-reserved, 0K highmem)
  25. [ 0.000000] Virtual kernel memory layout:
  26. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  28. [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
  29. [ 0.000000] lowmem : 0xc0000000 - 0xdfead000 ( 510 MB)
  30. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  31. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  32. [ 0.000000] .text : 0xc0208000 - 0xc0dfecfc (12252 kB)
  33. [ 0.000000] .init : 0xc0dff000 - 0xc10d8000 (2916 kB)
  34. [ 0.000000] .data : 0xc10d8000 - 0xc11edb68 (1111 kB)
  35. [ 0.000000] .bss : 0xc11f0000 - 0xc12463d8 ( 345 kB)
  36. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  37. [ 0.000000] Hierarchical RCU implementation.
  38. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  39. [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
  40. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
  41. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  42. [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  43. [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
  44. [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 10737418237500000ns
  45. [ 0.000000] Console: colour dummy device 80x30
  46. [ 0.025000] Calibrating delay loop... 1002.70 BogoMIPS (lpj=2506752)
  47. [ 0.025000] pid_max: default: 32768 minimum: 301
  48. [ 0.025000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  49. [ 0.025000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  50. [ 0.025000] CPU: Testing write buffer coherency: ok
  51. [ 0.025000] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  52. [ 0.025000] Setting up static identity map for 0x40209000 - 0x40209098
  53. [ 0.030000] Brought up 1 CPUs
  54. [ 0.030000] SMP: Total of 1 processors activated (1002.70 BogoMIPS).
  55. [ 0.030000] CPU: All CPU(s) started in SVC mode.
  56. [ 0.030000] devtmpfs: initialized
  57. [ 0.040000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  58. [ 0.040000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
  59. [ 0.045000] pinctrl core: initialized pinctrl subsystem
  60. [ 0.050000] NET: Registered protocol family 16
  61. [ 0.050000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  62. [ 0.055000] cpuidle: using governor ladder
  63. [ 0.055000] cpuidle: using governor menu
  64. [ 0.060000] No ATAGs?
  65. [ 0.060000] hw-breakpoint: debug architecture 0x4 unsupported.
  66. [ 0.065000] Serial: AMBA PL011 UART driver
  67. [ 0.075000] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/chip_vbus_pin@0, deferring probe
  68. [ 0.080000] SCSI subsystem initialized
  69. [ 0.080000] libata version 3.00 loaded.
  70. [ 0.080000] usbcore: registered new interface driver usbfs
  71. [ 0.080000] usbcore: registered new interface driver hub
  72. [ 0.080000] usbcore: registered new device driver usb
  73. [ 0.080000] pps_core: LinuxPPS API ver. 1 registered
  74. [ 0.080000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  75. [ 0.080000] PTP clock support registered
  76. [ 0.080000] EDAC MC: Ver: 3.0.0
  77. [ 0.085000] clocksource: Switched to clocksource timer
  78. [ 0.085000] simple-framebuffer 5febc000.framebuffer: framebuffer at 0x5febc000, 0x135600 bytes, mapped to 0xe0080000
  79. [ 0.085000] simple-framebuffer 5febc000.framebuffer: format=x8r8g8b8, mode=640x440x32, linelength=2880
  80. [ 0.090000] Console: switching to colour frame buffer device 80x27
  81. [ 0.095000] simple-framebuffer 5febc000.framebuffer: fb0: simplefb registered!
  82. [ 0.105000] NET: Registered protocol family 2
  83. [ 0.105000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  84. [ 0.105000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  85. [ 0.105000] TCP: Hash tables configured (established 4096 bind 4096)
  86. [ 0.105000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  87. [ 0.105000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  88. [ 0.105000] NET: Registered protocol family 1
  89. [ 0.105000] RPC: Registered named UNIX socket transport module.
  90. [ 0.105000] RPC: Registered udp transport module.
  91. [ 0.105000] RPC: Registered tcp transport module.
  92. [ 0.105000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  93. [ 0.105000] PCI: CLS 0 bytes, default 64
  94. [ 0.165000] futex hash table entries: 256 (order: 2, 16384 bytes)
  95. [ 0.175000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  96. [ 0.175000] NFS: Registering the id_resolver key type
  97. [ 0.180000] Key type id_resolver registered
  98. [ 0.180000] Key type id_legacy registered
  99. [ 0.180000] ntfs: driver 2.1.32 [Flags: R/O].
  100. [ 0.180000] fuse init (API version 7.23)
  101. [ 0.180000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  102. [ 0.180000] io scheduler noop registered
  103. [ 0.180000] io scheduler deadline registered
  104. [ 0.180000] io scheduler cfq registered (default)
  105. [ 0.180000] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/chip_id_det_pin@0, deferring probe
  106. [ 0.185000] sun5i-a13-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  107. [ 0.200000] coupled-voltage-regulator wifi_reg: Couldn't get regulator vin0
  108. [ 0.255000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  109. [ 0.260000] console [ttyS0] disabled
  110. [ 0.280000] 1c28400.serial: ttyS0 at MMIO 0x1c28400 (irq = 27, base_baud = 1500000) is a U6_16550A
  111. [ 0.875000] console [ttyS0] enabled
  112. [ 0.900000] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 28, base_baud = 1500000) is a U6_16550A
  113. [ 0.910000] SuperH (H)SCI(F) driver initialized
  114. [ 0.915000] msm_serial: driver initialized
  115. [ 0.920000] STMicroelectronics ASC driver initialized
  116. [ 0.925000] [drm] Initialized drm 1.1.0 20060810
  117. [ 0.935000] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  118. [ 0.940000] [drm] No driver support for vblank timestamp query.
  119. [ 0.945000] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc1169858)
  120. [ 0.955000] sun4i-tcon 1c0c000.lcd-controller: No panel or bridge found... RGB output disabled
  121. [ 0.960000] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc11696fc)
  122. [ 0.970000] sun4i-drm display-engine: bound 1c0a000.tv-encoder (ops 0xc1169934)
  123. [ 0.980000] checking generic (5febc000 135600) vs hw (0 ffffffff)
  124. [ 0.980000] fb: switching to sun4i-drm-fb from simple
  125. [ 0.985000] Console: switching to colour dummy device 80x30
  126. [ 1.015000] Console: switching to colour frame buffer device 90x30
  127. [ 1.025000] sun4i-drm display-engine: fb0: frame buffer device
  128. [ 1.035000] loop: module loaded
  129. [ 1.045000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xde
  130. [ 1.050000] nand: Hynix H27QCG8T2E5R‐BCF 64G 3.3V 8-bit
  131. [ 1.055000] nand: 8192 MiB, MLC, erase size: 4096 KiB, page size: 16384, OOB size: 1664
  132. [ 1.065000] Scanning device for bad blocks
  133. [ 1.155000] Bad eraseblock 393 at 0x0000627fc000
  134. [ 1.165000] Bad eraseblock 401 at 0x0000647fc000
  135. [ 1.180000] random: nonblocking pool is initialized
  136. [ 1.185000] Bad eraseblock 449 at 0x0000707fc000
  137. [ 1.190000] Bad eraseblock 469 at 0x0000757fc000
  138. [ 1.200000] Bad eraseblock 485 at 0x0000797fc000
  139. [ 1.220000] Bad eraseblock 543 at 0x000087ffc000
  140. [ 1.230000] Bad eraseblock 586 at 0x000092bfc000
  141. [ 1.245000] Bad eraseblock 628 at 0x00009d3fc000
  142. [ 1.255000] Bad eraseblock 638 at 0x00009fbfc000
  143. [ 1.265000] Bad eraseblock 675 at 0x0000a8ffc000
  144. [ 1.290000] Bad eraseblock 766 at 0x0000bfbfc000
  145. [ 1.335000] Bad eraseblock 944 at 0x0000ec3fc000
  146. [ 1.355000] Bad eraseblock 1012 at 0x0000fd3fc000
  147. [ 1.365000] Bad eraseblock 1048 at 0x0001063fc000
  148. [ 1.385000] Bad eraseblock 1113 at 0x0001167fc000
  149. [ 1.390000] Bad eraseblock 1118 at 0x000117bfc000
  150. [ 1.400000] Bad eraseblock 1121 at 0x0001187fc000
  151. [ 1.420000] Bad eraseblock 1204 at 0x00012d3fc000
  152. [ 1.430000] Bad eraseblock 1233 at 0x0001347fc000
  153. [ 1.445000] Bad eraseblock 1273 at 0x00013e7fc000
  154. [ 1.455000] Bad eraseblock 1287 at 0x000141ffc000
  155. [ 1.460000] Bad eraseblock 1299 at 0x000144ffc000
  156. [ 1.480000] Bad eraseblock 1372 at 0x0001573fc000
  157. [ 1.500000] Bad eraseblock 1443 at 0x000168ffc000
  158. [ 1.510000] Bad eraseblock 1462 at 0x00016dbfc000
  159. [ 1.530000] Bad eraseblock 1520 at 0x00017c3fc000
  160. [ 1.545000] Bad eraseblock 1577 at 0x00018a7fc000
  161. [ 1.560000] Bad eraseblock 1608 at 0x0001923fc000
  162. [ 1.570000] Bad eraseblock 1631 at 0x000197ffc000
  163. [ 1.575000] Bad eraseblock 1646 at 0x00019bbfc000
  164. [ 1.585000] Bad eraseblock 1657 at 0x00019e7fc000
  165. [ 1.635000] Bad eraseblock 1877 at 0x0001d57fc000
  166. [ 1.660000] Bad eraseblock 1958 at 0x0001e9bfc000
  167. [ 1.670000] Bad eraseblock 1985 at 0x0001f07fc000
  168. [ 1.690000] 6 ofpart partitions found on MTD device 1c03000.nand
  169. [ 1.695000] Creating 6 MTD partitions on "1c03000.nand":
  170. [ 1.700000] 0x000000000000-0x000000400000 : "spl"
  171. [ 1.705000] 0x000000400000-0x000000800000 : "spl-backup"
  172. [ 1.710000] 0x000000800000-0x000000c00000 : "uboot"
  173. [ 1.720000] 0x000000c00000-0x000001000000 : "env"
  174. [ 1.725000] 0x000001000000-0x00001a000000 : "swap"
  175. [ 1.730000] 0x00001a000000-0x000200000000 : "UBI"
  176. [ 1.740000] libphy: Fixed MDIO Bus: probed
  177. [ 1.745000] CAN device driver interface
  178. [ 1.750000] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  179. [ 1.755000] igb: Copyright (c) 2007-2014 Intel Corporation.
  180. [ 1.765000] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  181. [ 1.770000] usbcore: registered new interface driver pegasus
  182. [ 1.775000] usbcore: registered new interface driver asix
  183. [ 1.785000] usbcore: registered new interface driver ax88179_178a
  184. [ 1.790000] usbcore: registered new interface driver cdc_ether
  185. [ 1.795000] usbcore: registered new interface driver smsc75xx
  186. [ 1.800000] usbcore: registered new interface driver smsc95xx
  187. [ 1.805000] usbcore: registered new interface driver net1080
  188. [ 1.810000] usbcore: registered new interface driver rndis_host
  189. [ 1.820000] usbcore: registered new interface driver cdc_subset
  190. [ 1.825000] usbcore: registered new interface driver zaurus
  191. [ 1.830000] usbcore: registered new interface driver cdc_ncm
  192. [ 1.835000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  193. [ 1.845000] ehci-pci: EHCI PCI platform driver
  194. [ 1.850000] ehci-platform: EHCI generic platform driver
  195. [ 1.855000] ehci-omap: OMAP-EHCI Host Controller driver
  196. [ 1.860000] ehci-orion: EHCI orion driver
  197. [ 1.865000] SPEAr-ehci: EHCI SPEAr driver
  198. [ 1.870000] ehci-st: EHCI STMicroelectronics driver
  199. [ 1.875000] ehci-exynos: EHCI EXYNOS driver
  200. [ 1.875000] ehci-atmel: EHCI Atmel driver
  201. [ 1.880000] tegra-ehci: Tegra EHCI driver
  202. [ 1.885000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  203. [ 1.890000] ohci-pci: OHCI PCI platform driver
  204. [ 1.895000] ohci-platform: OHCI generic platform driver
  205. [ 1.900000] ohci-omap3: OHCI OMAP3 driver
  206. [ 1.905000] SPEAr-ohci: OHCI SPEAr driver
  207. [ 1.910000] ohci-st: OHCI STMicroelectronics driver
  208. [ 1.915000] ohci-atmel: OHCI Atmel driver
  209. [ 1.920000] usbcore: registered new interface driver usb-storage
  210. [ 1.925000] mousedev: PS/2 mouse device common for all mice
  211. [ 1.935000] i2c /dev entries driver
  212. [ 1.940000] axp20x 0-0034: AXP20x variant AXP209 found
  213. [ 1.960000] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
  214. [ 1.980000] axp20x 0-0034: AXP20X driver loaded
  215. [ 1.985000] pcf857x 2-0038: probed
  216. [ 1.990000] Driver for 1-wire Dallas network protocol.
  217. [ 2.015000] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  218. [ 2.025000] sdhci: Secure Digital Host Controller Interface driver
  219. [ 2.035000] sdhci: Copyright(c) Pierre Ossman
  220. [ 2.040000] Synopsys Designware Multimedia Card Interface Driver
  221. [ 2.045000] sdhci-pltfm: SDHCI platform and OF driver helper
  222. [ 2.055000] ledtrig-cpu: registered to indicate activity on CPUs
  223. [ 2.060000] usbcore: registered new interface driver usbhid
  224. [ 2.065000] usbhid: USB HID core driver
  225. [ 2.070000] ip_tables: (C) 2000-2006 Netfilter Core Team
  226. [ 2.080000] NET: Registered protocol family 10
  227. [ 2.085000] sit: IPv6 over IPv4 tunneling driver
  228. [ 2.090000] NET: Registered protocol family 17
  229. [ 2.095000] can: controller area network core (rev 20120528 abi 9)
  230. [ 2.100000] NET: Registered protocol family 29
  231. [ 2.105000] can: raw protocol (rev 20120528)
  232. [ 2.110000] can: broadcast manager protocol (rev 20120528 t)
  233. [ 2.115000] can: netlink gateway (rev 20130117) max_hops=1
  234. [ 2.120000] Key type dns_resolver registered
  235. [ 2.130000] ThumbEE CPU extension supported.
  236. [ 2.135000] Registering SWP/SWPB emulation handler
  237. [ 2.145000] usb0-vbus: supplied by vcc5v0
  238. [ 2.150000] ehci-platform 1c14000.usb: EHCI Host Controller
  239. [ 2.155000] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  240. [ 2.165000] ehci-platform 1c14000.usb: irq 22, io mem 0x01c14000
  241. [ 2.180000] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  242. [ 2.185000] hub 1-0:1.0: USB hub found
  243. [ 2.190000] hub 1-0:1.0: 1 port detected
  244. [ 2.195000] ohci-platform 1c14400.usb: Generic Platform OHCI controller
  245. [ 2.200000] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 2
  246. [ 2.210000] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400
  247. [ 2.270000] hub 2-0:1.0: USB hub found
  248. [ 2.275000] hub 2-0:1.0: 1 port detected
  249. [ 2.280000] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
  250. [ 2.290000] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  251. [ 2.290000] musb-hdrc: MHDRC RTL version 0.0
  252. [ 2.290000] musb-hdrc: 11/11 max ep, 5184/8192 memory
  253. [ 2.290000] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  254. [ 2.295000] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
  255. [ 2.305000] hub 3-0:1.0: USB hub found
  256. [ 2.310000] hub 3-0:1.0: 1 port detected
  257. [ 2.315000] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
  258. [ 2.320000] sunxi-mmc 1c0f000.mmc: allocated mmc-pwrseq
  259. [ 2.360000] sunxi-mmc 1c0f000.mmc: base:0xe0a10000 irq:20
  260. [ 2.365000] ubi0: attaching mtd5
  261. [ 2.375000] sunxi-mmc 1c0f000.mmc: smc 0 err, cmd 8, RTO !!
  262. [ 2.390000] mmc0: new high speed SDIO card at address 0001
  263. [ 2.515000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  264. [ 3.435000] ubi0: scanning is finished
  265. [ 3.450000] ubi0: attached mtd5 (name "UBI", size 7776 MiB)
  266. [ 3.455000] ubi0: PEB size: 4194304 bytes (2048 KiB), LEB size: 2064384 bytes
  267. [ 3.460000] ubi0: min./max. I/O unit sizes: 16384/16384, sub-page size 16384
  268. [ 3.470000] ubi0: VID header offset: 16384 (aligned 16384), data offset: 32768
  269. [ 3.475000] ubi0: good PEBs: 1910, bad PEBs: 34, corrupted PEBs: 0
  270. [ 3.485000] ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
  271. [ 3.490000] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 118795185
  272. [ 3.500000] ubi0: available PEBs: 0, total reserved PEBs: 1910, PEBs reserved for bad PEB handling: 6
  273. [ 3.510000] hctosys: unable to open rtc device (rtc0)
  274. [ 3.520000] vcc3v0: disabling
  275. [ 3.520000] vcc3v3: disabling
  276. [ 3.525000] ubi0: background thread "ubi_bgt0d" started, PID 59
  277. [ 3.530000] usb0-vbus: disabling
  278. [ 3.540000] Freeing unused kernel memory: 2916K (c0dff000 - c10d8000)
  279. [ 4.500000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "linux", R/O mode
  280. [ 4.510000] UBIFS (ubi0:1): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  281. [ 4.520000] UBIFS (ubi0:1): FS size: 189923328 bytes (181 MiB, 92 LEBs), journal size 18579457 bytes (17 MiB, 9 LEBs)
  282. [ 4.530000] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB)
  283. [ 4.535000] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID CEB429D2-5351-474F-84D8-A63960F7E9F2, small LPT model
  284. [ 5.650000] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "root_1611231956", R/O mode
  285. [ 5.660000] UBIFS (ubi0:2): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  286. [ 5.670000] UBIFS (ubi0:2): FS size: 189923328 bytes (181 MiB, 92 LEBs), journal size 16515073 bytes (15 MiB, 6 LEBs)
  287. [ 5.680000] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
  288. [ 5.690000] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID B867084A-7943-4220-90F3-9204E5C44443, small LPT model
  289. [ 6.360000] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 112
  290. [ 7.270000] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "conf"
  291. [ 7.280000] UBIFS (ubi0:3): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  292. [ 7.290000] UBIFS (ubi0:3): FS size: 47480832 bytes (45 MiB, 23 LEBs), journal size 16515073 bytes (15 MiB, 6 LEBs)
  293. [ 7.300000] UBIFS (ubi0:3): reserved for root: 2242636 bytes (2190 KiB)
  294. [ 7.305000] UBIFS (ubi0:3): media format: w4/r0 (latest is w4/r0), UUID 3912A463-A06C-4802-87C0-1B07191BB6D8, small LPT model
  295. [ 7.350000] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 113
  296. [ 8.015000] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "cache"
  297. [ 8.020000] UBIFS (ubi0:4): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  298. [ 8.030000] UBIFS (ubi0:4): FS size: 249790464 bytes (238 MiB, 121 LEBs), journal size 16515073 bytes (15 MiB, 6 LEBs)
  299. [ 8.045000] UBIFS (ubi0:4): reserved for root: 4952683 bytes (4836 KiB)
  300. [ 8.050000] UBIFS (ubi0:4): media format: w4/r0 (latest is w4/r0), UUID 736FEF1C-6845-4650-8F44-D015058DAC1C, small LPT model
  301. [ 8.135000] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 114
  302. [ 8.750000] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "appdata"
  303. [ 8.760000] UBIFS (ubi0:5): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  304. [ 8.770000] UBIFS (ubi0:5): FS size: 608993280 bytes (580 MiB, 295 LEBs), journal size 30965760 bytes (29 MiB, 15 LEBs)
  305. [ 8.780000] UBIFS (ubi0:5): reserved for root: 4952683 bytes (4836 KiB)
  306. [ 8.785000] UBIFS (ubi0:5): media format: w4/r0 (latest is w4/r0), UUID 160E85C3-9EAD-4E90-BE4D-4EEC9D7288A5, small LPT model
  307. [ 8.825000] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 115
  308. [ 9.585000] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "data"
  309. [ 9.590000] UBIFS (ubi0:6): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  310. [ 9.600000] UBIFS (ubi0:6): FS size: 2512355328 bytes (2395 MiB, 1217 LEBs), journal size 33030144 bytes (31 MiB, 16 LEBs)
  311. [ 9.610000] UBIFS (ubi0:6): reserved for root: 4952683 bytes (4836 KiB)
  312. [ 9.620000] UBIFS (ubi0:6): media format: w4/r0 (latest is w4/r0), UUID 06D87AFA-98F4-4985-9F87-CFAE3B31BDCF, small LPT model
  313. [ 11.285000] Adding 409596k swap on /dev/mtdblock4. Priority:-1 extents:1 across:409596k SS
  314. [ 11.475000] using random self ethernet address
  315. [ 11.480000] using random host ethernet address
  316. [ 11.510000] usb0: HOST MAC 16:4c:23:51:a8:d1
  317. [ 11.515000] usb0: MAC c6:cc:1f:b1:28:73
  318. [ 11.520000] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
  319. [ 11.525000] g_cdc gadget: g_cdc ready
  320. [ 12.500000] udevd[236]: starting version 3.1.5
  321. [ 14.080000] RTL8723BS: module init start
  322. [ 14.080000] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
  323. [ 14.090000] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
  324. [ 14.240000] RTL8723BS: rtw_ndev_init(wlan0)
  325. [ 14.255000] RTL8723BS: module init ret =0
  326. [ 15.290000] cfg80211: World regulatory domain updated:
  327. [ 15.295000] cfg80211: DFS Master region: unset
  328. [ 15.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  329. [ 15.310000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  330. [ 15.320000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  331. [ 15.330000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  332. [ 15.335000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  333. [ 15.345000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  334. [ 15.355000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  335. [ 15.365000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  336. [ 15.370000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  337. [ 15.695000] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  338. [ 15.980000] rtl8723bs: accquire FW from file:rtlwifi/rtl8723bs_nic.bin
  339. [ 17.325000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  340. [ 18.985000] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008
  341. [ 19.215000] RTL8723BS: start auth
  342. [ 19.220000] RTL8723BS: auth success, start assoc
  343. [ 19.230000] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
  344. [ 19.240000] RTL8723BS: assoc success
  345. [ 19.240000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  346. [ 19.295000] RTL8723BS: send eapol packet
  347. [ 19.320000] RTL8723BS: send eapol packet
  348. [ 19.325000] RTL8723BS: set pairwise key camid:4, addr:50:6a:03:b1:1c:ca, kid:0, type:AES
  349. [ 19.340000] RTL8723BS: set group key camid:5, addr:50:6a:03:b1:1c:ca, kid:1, type:AES
  350. [ 19.370000] cfg80211: Regulatory domain changed to country: US
  351. [ 19.375000] cfg80211: DFS Master region: FCC
  352. [ 19.380000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  353. [ 19.390000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  354. [ 19.400000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
  355. [ 19.405000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  356. [ 19.415000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
  357. [ 19.425000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  358. [ 19.435000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  359. [rxOS][outernet@skylark:/tmp/screens]$
  360. [rxOS][outernet@skylark:/tmp/screens]$
  361. [rxOS][outernet@skylark:/tmp/screens]$
  362. [rxOS][outernet@skylark:/tmp/screens]$ cat /var/log/messages
  363. Jan 1 00:00:08 skylark syslog.info syslogd started: BusyBox v1.24.1
  364. Jan 1 00:00:08 skylark user.notice kernel: klogd started: BusyBox v1.24.1 ()
  365. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
  366. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] Linux version 4.4.11 (abhishek@build) (gcc version 4.9.3 (Buildroot 2016.02-git-ga08389c) ) #1 SMP 2016-01-01
  367. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  368. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  369. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Machine model: NextThing C.H.I.P.
  370. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] cma: Reserved 64 MiB at 0x5b800000
  371. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Memory policy: Data cache writeback
  372. Jan 1 00:00:08 skylark user.debug kernel: [ 0.000000] On node 0 totalpages: 130733
  373. Jan 1 00:00:08 skylark user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c11d20c0, node_mem_map df9ff000
  374. Jan 1 00:00:08 skylark user.debug kernel: [ 0.000000] DMA zone: 1022 pages used for memmap
  375. Jan 1 00:00:08 skylark user.debug kernel: [ 0.000000] DMA zone: 0 pages reserved
  376. Jan 1 00:00:08 skylark user.debug kernel: [ 0.000000] DMA zone: 130733 pages, LIFO batch:31
  377. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] CPU: All CPU(s) started in SVC mode.
  378. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] PERCPU: Embedded 12 pages/cpu @dfe59000 s19136 r8192 d21824 u49152
  379. Jan 1 00:00:08 skylark user.debug kernel: [ 0.000000] pcpu-alloc: s19136 r8192 d21824 u49152 alloc=12*4096
  380. Jan 1 00:00:08 skylark user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0
  381. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129711
  382. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] Kernel command line: consoleblank=0 earlyprintk console=ttyS0,115200 ubi.mtd=5
  383. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  384. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  385. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  386. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Memory: 435888K/522932K available (8275K kernel code, 1110K rwdata, 3972K rodata, 2916K init, 344K bss, 21508K reserved, 65536K cma-reserved, 0K highmem)
  387. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] Virtual kernel memory layout:
  388. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  389. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  390. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
  391. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xdfead000 ( 510 MB)
  392. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  393. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  394. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] .text : 0xc0208000 - 0xc0dfecfc (12252 kB)
  395. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] .init : 0xc0dff000 - 0xc10d8000 (2916 kB)
  396. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] .data : 0xc10d8000 - 0xc11edb68 (1111 kB)
  397. Jan 1 00:00:08 skylark user.notice kernel: [ 0.000000] .bss : 0xc11f0000 - 0xc12463d8 ( 345 kB)
  398. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  399. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Hierarchical RCU implementation.
  400. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Build-time adjustment of leaf fanout to 32.
  401. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=1.
  402. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
  403. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  404. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  405. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370868154 ns
  406. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] sched_clock: 32 bits at 200 Hz, resolution 5000000ns, wraps every 10737418237500000ns
  407. Jan 1 00:00:08 skylark user.info kernel: [ 0.000000] Console: colour dummy device 80x30
  408. Jan 1 00:00:08 skylark user.info kernel: [ 0.025000] Calibrating delay loop... 1002.70 BogoMIPS (lpj=2506752)
  409. Jan 1 00:00:08 skylark user.info kernel: [ 0.025000] pid_max: default: 32768 minimum: 301
  410. Jan 1 00:00:08 skylark user.info kernel: [ 0.025000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  411. Jan 1 00:00:08 skylark user.info kernel: [ 0.025000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  412. Jan 1 00:00:08 skylark user.info kernel: [ 0.025000] CPU: Testing write buffer coherency: ok
  413. Jan 1 00:00:08 skylark user.info kernel: [ 0.025000] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  414. Jan 1 00:00:08 skylark user.info kernel: [ 0.025000] Setting up static identity map for 0x40209000 - 0x40209098
  415. Jan 1 00:00:08 skylark user.info kernel: [ 0.030000] Brought up 1 CPUs
  416. Jan 1 00:00:08 skylark user.info kernel: [ 0.030000] SMP: Total of 1 processors activated (1002.70 BogoMIPS).
  417. Jan 1 00:00:08 skylark user.info kernel: [ 0.030000] CPU: All CPU(s) started in SVC mode.
  418. Jan 1 00:00:08 skylark user.info kernel: [ 0.030000] devtmpfs: initialized
  419. Jan 1 00:00:08 skylark user.info kernel: [ 0.040000] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  420. Jan 1 00:00:08 skylark user.info kernel: [ 0.040000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
  421. Jan 1 00:00:08 skylark user.info kernel: [ 0.045000] pinctrl core: initialized pinctrl subsystem
  422. Jan 1 00:00:08 skylark user.info kernel: [ 0.050000] NET: Registered protocol family 16
  423. Jan 1 00:00:08 skylark user.info kernel: [ 0.050000] DMA: preallocated 256 KiB pool for atomic coherent allocations
  424. Jan 1 00:00:08 skylark user.info kernel: [ 0.055000] cpuidle: using governor ladder
  425. Jan 1 00:00:08 skylark user.info kernel: [ 0.055000] cpuidle: using governor menu
  426. Jan 1 00:00:08 skylark user.info kernel: [ 0.060000] No ATAGs?
  427. Jan 1 00:00:08 skylark user.info kernel: [ 0.060000] hw-breakpoint: debug architecture 0x4 unsupported.
  428. Jan 1 00:00:08 skylark user.info kernel: [ 0.065000] Serial: AMBA PL011 UART driver
  429. Jan 1 00:00:08 skylark user.info kernel: [ 0.075000] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/chip_vbus_pin@0, deferring probe
  430. Jan 1 00:00:08 skylark user.notice kernel: [ 0.080000] SCSI subsystem initialized
  431. Jan 1 00:00:08 skylark user.debug kernel: [ 0.080000] libata version 3.00 loaded.
  432. Jan 1 00:00:08 skylark user.info kernel: [ 0.080000] usbcore: registered new interface driver usbfs
  433. Jan 1 00:00:08 skylark user.info kernel: [ 0.080000] usbcore: registered new interface driver hub
  434. Jan 1 00:00:08 skylark user.info kernel: [ 0.080000] usbcore: registered new device driver usb
  435. Jan 1 00:00:08 skylark user.info kernel: [ 0.080000] pps_core: LinuxPPS API ver. 1 registered
  436. Jan 1 00:00:08 skylark user.info kernel: [ 0.080000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  437. Jan 1 00:00:08 skylark user.info kernel: [ 0.080000] PTP clock support registered
  438. Jan 1 00:00:08 skylark user.info kernel: [ 0.080000] EDAC MC: Ver: 3.0.0
  439. Jan 1 00:00:08 skylark user.info kernel: [ 0.085000] clocksource: Switched to clocksource timer
  440. Jan 1 00:00:08 skylark user.info kernel: [ 0.085000] simple-framebuffer 5febc000.framebuffer: framebuffer at 0x5febc000, 0x135600 bytes, mapped to 0xe0080000
  441. Jan 1 00:00:08 skylark user.info kernel: [ 0.085000] simple-framebuffer 5febc000.framebuffer: format=x8r8g8b8, mode=640x440x32, linelength=2880
  442. Jan 1 00:00:08 skylark user.info kernel: [ 0.090000] Console: switching to colour frame buffer device 80x27
  443. Jan 1 00:00:08 skylark user.info kernel: [ 0.095000] simple-framebuffer 5febc000.framebuffer: fb0: simplefb registered!
  444. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] NET: Registered protocol family 2
  445. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  446. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  447. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] TCP: Hash tables configured (established 4096 bind 4096)
  448. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] UDP hash table entries: 256 (order: 1, 8192 bytes)
  449. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  450. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] NET: Registered protocol family 1
  451. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] RPC: Registered named UNIX socket transport module.
  452. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] RPC: Registered udp transport module.
  453. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] RPC: Registered tcp transport module.
  454. Jan 1 00:00:08 skylark user.info kernel: [ 0.105000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  455. Jan 1 00:00:08 skylark user.debug kernel: [ 0.105000] PCI: CLS 0 bytes, default 64
  456. Jan 1 00:00:08 skylark user.info kernel: [ 0.165000] futex hash table entries: 256 (order: 2, 16384 bytes)
  457. Jan 1 00:00:08 skylark user.info kernel: [ 0.175000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  458. Jan 1 00:00:08 skylark user.notice kernel: [ 0.175000] NFS: Registering the id_resolver key type
  459. Jan 1 00:00:08 skylark user.notice kernel: [ 0.180000] Key type id_resolver registered
  460. Jan 1 00:00:08 skylark user.notice kernel: [ 0.180000] Key type id_legacy registered
  461. Jan 1 00:00:08 skylark user.info kernel: [ 0.180000] ntfs: driver 2.1.32 [Flags: R/O].
  462. Jan 1 00:00:08 skylark user.info kernel: [ 0.180000] fuse init (API version 7.23)
  463. Jan 1 00:00:08 skylark user.info kernel: [ 0.180000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  464. Jan 1 00:00:08 skylark user.info kernel: [ 0.180000] io scheduler noop registered
  465. Jan 1 00:00:08 skylark user.info kernel: [ 0.180000] io scheduler deadline registered
  466. Jan 1 00:00:08 skylark user.info kernel: [ 0.180000] io scheduler cfq registered (default)
  467. Jan 1 00:00:08 skylark user.info kernel: [ 0.180000] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/chip_id_det_pin@0, deferring probe
  468. Jan 1 00:00:08 skylark user.info kernel: [ 0.185000] sun5i-a13-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  469. Jan 1 00:00:08 skylark user.err kernel: [ 0.200000] coupled-voltage-regulator wifi_reg: Couldn't get regulator vin0
  470. Jan 1 00:00:08 skylark user.info kernel: [ 0.255000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  471. Jan 1 00:00:08 skylark user.info kernel: [ 0.260000] console [ttyS0] disabled
  472. Jan 1 00:00:08 skylark user.info kernel: [ 0.280000] 1c28400.serial: ttyS0 at MMIO 0x1c28400 (irq = 27, base_baud = 1500000) is a U6_16550A
  473. Jan 1 00:00:08 skylark user.info kernel: [ 0.875000] console [ttyS0] enabled
  474. Jan 1 00:00:08 skylark user.info kernel: [ 0.900000] 1c28c00.serial: ttyS1 at MMIO 0x1c28c00 (irq = 28, base_baud = 1500000) is a U6_16550A
  475. Jan 1 00:00:08 skylark user.info kernel: [ 0.910000] SuperH (H)SCI(F) driver initialized
  476. Jan 1 00:00:08 skylark user.info kernel: [ 0.915000] msm_serial: driver initialized
  477. Jan 1 00:00:08 skylark user.info kernel: [ 0.920000] STMicroelectronics ASC driver initialized
  478. Jan 1 00:00:08 skylark user.info kernel: [ 0.925000] [drm] Initialized drm 1.1.0 20060810
  479. Jan 1 00:00:08 skylark user.info kernel: [ 0.935000] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  480. Jan 1 00:00:08 skylark user.info kernel: [ 0.940000] [drm] No driver support for vblank timestamp query.
  481. Jan 1 00:00:08 skylark user.info kernel: [ 0.945000] sun4i-drm display-engine: bound 1e60000.display-backend (ops 0xc1169858)
  482. Jan 1 00:00:08 skylark user.info kernel: [ 0.955000] sun4i-tcon 1c0c000.lcd-controller: No panel or bridge found... RGB output disabled
  483. Jan 1 00:00:08 skylark user.info kernel: [ 0.960000] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc11696fc)
  484. Jan 1 00:00:08 skylark user.info kernel: [ 0.970000] sun4i-drm display-engine: bound 1c0a000.tv-encoder (ops 0xc1169934)
  485. Jan 1 00:00:08 skylark user.debug kernel: [ 0.980000] checking generic (5febc000 135600) vs hw (0 ffffffff)
  486. Jan 1 00:00:08 skylark user.info kernel: [ 0.980000] fb: switching to sun4i-drm-fb from simple
  487. Jan 1 00:00:08 skylark user.info kernel: [ 0.985000] Console: switching to colour dummy device 80x30
  488. Jan 1 00:00:08 skylark user.info kernel: [ 1.015000] Console: switching to colour frame buffer device 90x30
  489. Jan 1 00:00:08 skylark user.info kernel: [ 1.025000] sun4i-drm display-engine: fb0: frame buffer device
  490. Jan 1 00:00:08 skylark user.info kernel: [ 1.035000] loop: module loaded
  491. Jan 1 00:00:08 skylark user.info kernel: [ 1.045000] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xde
  492. Jan 1 00:00:08 skylark user.info kernel: [ 1.050000] nand: Hynix H27QCG8T2E5R‐BCF 64G 3.3V 8-bit
  493. Jan 1 00:00:08 skylark user.info kernel: [ 1.055000] nand: 8192 MiB, MLC, erase size: 4096 KiB, page size: 16384, OOB size: 1664
  494. Jan 1 00:00:08 skylark user.info kernel: [ 1.065000] Scanning device for bad blocks
  495. Jan 1 00:00:08 skylark user.warn kernel: [ 1.155000] Bad eraseblock 393 at 0x0000627fc000
  496. Jan 1 00:00:08 skylark user.warn kernel: [ 1.165000] Bad eraseblock 401 at 0x0000647fc000
  497. Jan 1 00:00:08 skylark user.notice kernel: [ 1.180000] random: nonblocking pool is initialized
  498. Jan 1 00:00:08 skylark user.warn kernel: [ 1.185000] Bad eraseblock 449 at 0x0000707fc000
  499. Jan 1 00:00:08 skylark user.warn kernel: [ 1.190000] Bad eraseblock 469 at 0x0000757fc000
  500. Jan 1 00:00:08 skylark user.warn kernel: [ 1.200000] Bad eraseblock 485 at 0x0000797fc000
  501. Jan 1 00:00:08 skylark user.warn kernel: [ 1.220000] Bad eraseblock 543 at 0x000087ffc000
  502. Jan 1 00:00:08 skylark user.warn kernel: [ 1.230000] Bad eraseblock 586 at 0x000092bfc000
  503. Jan 1 00:00:08 skylark user.warn kernel: [ 1.245000] Bad eraseblock 628 at 0x00009d3fc000
  504. Jan 1 00:00:08 skylark user.warn kernel: [ 1.255000] Bad eraseblock 638 at 0x00009fbfc000
  505. Jan 1 00:00:08 skylark user.warn kernel: [ 1.265000] Bad eraseblock 675 at 0x0000a8ffc000
  506. Jan 1 00:00:08 skylark user.warn kernel: [ 1.290000] Bad eraseblock 766 at 0x0000bfbfc000
  507. Jan 1 00:00:08 skylark user.warn kernel: [ 1.335000] Bad eraseblock 944 at 0x0000ec3fc000
  508. Jan 1 00:00:08 skylark user.warn kernel: [ 1.355000] Bad eraseblock 1012 at 0x0000fd3fc000
  509. Jan 1 00:00:08 skylark user.warn kernel: [ 1.365000] Bad eraseblock 1048 at 0x0001063fc000
  510. Jan 1 00:00:08 skylark user.warn kernel: [ 1.385000] Bad eraseblock 1113 at 0x0001167fc000
  511. Jan 1 00:00:08 skylark user.warn kernel: [ 1.390000] Bad eraseblock 1118 at 0x000117bfc000
  512. Jan 1 00:00:08 skylark user.warn kernel: [ 1.400000] Bad eraseblock 1121 at 0x0001187fc000
  513. Jan 1 00:00:08 skylark user.warn kernel: [ 1.420000] Bad eraseblock 1204 at 0x00012d3fc000
  514. Jan 1 00:00:08 skylark user.warn kernel: [ 1.430000] Bad eraseblock 1233 at 0x0001347fc000
  515. Jan 1 00:00:08 skylark user.warn kernel: [ 1.445000] Bad eraseblock 1273 at 0x00013e7fc000
  516. Jan 1 00:00:08 skylark user.warn kernel: [ 1.455000] Bad eraseblock 1287 at 0x000141ffc000
  517. Jan 1 00:00:08 skylark user.warn kernel: [ 1.460000] Bad eraseblock 1299 at 0x000144ffc000
  518. Jan 1 00:00:08 skylark user.warn kernel: [ 1.480000] Bad eraseblock 1372 at 0x0001573fc000
  519. Jan 1 00:00:08 skylark user.warn kernel: [ 1.500000] Bad eraseblock 1443 at 0x000168ffc000
  520. Jan 1 00:00:08 skylark user.warn kernel: [ 1.510000] Bad eraseblock 1462 at 0x00016dbfc000
  521. Jan 1 00:00:08 skylark user.warn kernel: [ 1.530000] Bad eraseblock 1520 at 0x00017c3fc000
  522. Jan 1 00:00:08 skylark user.warn kernel: [ 1.545000] Bad eraseblock 1577 at 0x00018a7fc000
  523. Jan 1 00:00:08 skylark user.warn kernel: [ 1.560000] Bad eraseblock 1608 at 0x0001923fc000
  524. Jan 1 00:00:08 skylark user.warn kernel: [ 1.570000] Bad eraseblock 1631 at 0x000197ffc000
  525. Jan 1 00:00:08 skylark user.warn kernel: [ 1.575000] Bad eraseblock 1646 at 0x00019bbfc000
  526. Jan 1 00:00:08 skylark user.warn kernel: [ 1.585000] Bad eraseblock 1657 at 0x00019e7fc000
  527. Jan 1 00:00:08 skylark user.warn kernel: [ 1.635000] Bad eraseblock 1877 at 0x0001d57fc000
  528. Jan 1 00:00:08 skylark user.warn kernel: [ 1.660000] Bad eraseblock 1958 at 0x0001e9bfc000
  529. Jan 1 00:00:08 skylark user.warn kernel: [ 1.670000] Bad eraseblock 1985 at 0x0001f07fc000
  530. Jan 1 00:00:08 skylark user.notice kernel: [ 1.690000] 6 ofpart partitions found on MTD device 1c03000.nand
  531. Jan 1 00:00:08 skylark user.notice kernel: [ 1.695000] Creating 6 MTD partitions on "1c03000.nand":
  532. Jan 1 00:00:08 skylark user.notice kernel: [ 1.700000] 0x000000000000-0x000000400000 : "spl"
  533. Jan 1 00:00:08 skylark user.notice kernel: [ 1.705000] 0x000000400000-0x000000800000 : "spl-backup"
  534. Jan 1 00:00:08 skylark user.notice kernel: [ 1.710000] 0x000000800000-0x000000c00000 : "uboot"
  535. Jan 1 00:00:08 skylark user.notice kernel: [ 1.720000] 0x000000c00000-0x000001000000 : "env"
  536. Jan 1 00:00:08 skylark user.notice kernel: [ 1.725000] 0x000001000000-0x00001a000000 : "swap"
  537. Jan 1 00:00:08 skylark user.notice kernel: [ 1.730000] 0x00001a000000-0x000200000000 : "UBI"
  538. Jan 1 00:00:08 skylark user.info kernel: [ 1.740000] libphy: Fixed MDIO Bus: probed
  539. Jan 1 00:00:08 skylark user.info kernel: [ 1.745000] CAN device driver interface
  540. Jan 1 00:00:08 skylark user.info kernel: [ 1.750000] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
  541. Jan 1 00:00:08 skylark user.info kernel: [ 1.755000] igb: Copyright (c) 2007-2014 Intel Corporation.
  542. Jan 1 00:00:08 skylark user.info kernel: [ 1.765000] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  543. Jan 1 00:00:08 skylark user.info kernel: [ 1.770000] usbcore: registered new interface driver pegasus
  544. Jan 1 00:00:08 skylark user.info kernel: [ 1.775000] usbcore: registered new interface driver asix
  545. Jan 1 00:00:08 skylark user.info kernel: [ 1.785000] usbcore: registered new interface driver ax88179_178a
  546. Jan 1 00:00:08 skylark user.info kernel: [ 1.790000] usbcore: registered new interface driver cdc_ether
  547. Jan 1 00:00:08 skylark user.info kernel: [ 1.795000] usbcore: registered new interface driver smsc75xx
  548. Jan 1 00:00:08 skylark user.info kernel: [ 1.800000] usbcore: registered new interface driver smsc95xx
  549. Jan 1 00:00:08 skylark user.info kernel: [ 1.805000] usbcore: registered new interface driver net1080
  550. Jan 1 00:00:08 skylark user.info kernel: [ 1.810000] usbcore: registered new interface driver rndis_host
  551. Jan 1 00:00:08 skylark user.info kernel: [ 1.820000] usbcore: registered new interface driver cdc_subset
  552. Jan 1 00:00:08 skylark user.info kernel: [ 1.825000] usbcore: registered new interface driver zaurus
  553. Jan 1 00:00:08 skylark user.info kernel: [ 1.830000] usbcore: registered new interface driver cdc_ncm
  554. Jan 1 00:00:08 skylark user.info kernel: [ 1.835000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  555. Jan 1 00:00:08 skylark user.info kernel: [ 1.845000] ehci-pci: EHCI PCI platform driver
  556. Jan 1 00:00:08 skylark user.info kernel: [ 1.850000] ehci-platform: EHCI generic platform driver
  557. Jan 1 00:00:08 skylark user.info kernel: [ 1.855000] ehci-omap: OMAP-EHCI Host Controller driver
  558. Jan 1 00:00:08 skylark user.info kernel: [ 1.860000] ehci-orion: EHCI orion driver
  559. Jan 1 00:00:08 skylark user.info kernel: [ 1.865000] SPEAr-ehci: EHCI SPEAr driver
  560. Jan 1 00:00:08 skylark user.info kernel: [ 1.870000] ehci-st: EHCI STMicroelectronics driver
  561. Jan 1 00:00:08 skylark user.info kernel: [ 1.875000] ehci-exynos: EHCI EXYNOS driver
  562. Jan 1 00:00:08 skylark user.info kernel: [ 1.875000] ehci-atmel: EHCI Atmel driver
  563. Jan 1 00:00:08 skylark user.info kernel: [ 1.880000] tegra-ehci: Tegra EHCI driver
  564. Jan 1 00:00:08 skylark user.info kernel: [ 1.885000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  565. Jan 1 00:00:08 skylark user.info kernel: [ 1.890000] ohci-pci: OHCI PCI platform driver
  566. Jan 1 00:00:08 skylark user.info kernel: [ 1.895000] ohci-platform: OHCI generic platform driver
  567. Jan 1 00:00:08 skylark user.info kernel: [ 1.900000] ohci-omap3: OHCI OMAP3 driver
  568. Jan 1 00:00:08 skylark user.info kernel: [ 1.905000] SPEAr-ohci: OHCI SPEAr driver
  569. Jan 1 00:00:08 skylark user.info kernel: [ 1.910000] ohci-st: OHCI STMicroelectronics driver
  570. Jan 1 00:00:08 skylark user.info kernel: [ 1.915000] ohci-atmel: OHCI Atmel driver
  571. Jan 1 00:00:08 skylark user.info kernel: [ 1.920000] usbcore: registered new interface driver usb-storage
  572. Jan 1 00:00:08 skylark user.info kernel: [ 1.925000] mousedev: PS/2 mouse device common for all mice
  573. Jan 1 00:00:08 skylark user.info kernel: [ 1.935000] i2c /dev entries driver
  574. Jan 1 00:00:08 skylark user.info kernel: [ 1.940000] axp20x 0-0034: AXP20x variant AXP209 found
  575. Jan 1 00:00:08 skylark user.info kernel: [ 1.960000] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
  576. Jan 1 00:00:08 skylark user.info kernel: [ 1.980000] axp20x 0-0034: AXP20X driver loaded
  577. Jan 1 00:00:08 skylark user.info kernel: [ 1.985000] pcf857x 2-0038: probed
  578. Jan 1 00:00:08 skylark user.info kernel: [ 1.990000] Driver for 1-wire Dallas network protocol.
  579. Jan 1 00:00:08 skylark user.info kernel: [ 2.015000] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  580. Jan 1 00:00:08 skylark user.info kernel: [ 2.025000] sdhci: Secure Digital Host Controller Interface driver
  581. Jan 1 00:00:08 skylark user.info kernel: [ 2.035000] sdhci: Copyright(c) Pierre Ossman
  582. Jan 1 00:00:08 skylark user.info kernel: [ 2.040000] Synopsys Designware Multimedia Card Interface Driver
  583. Jan 1 00:00:08 skylark user.info kernel: [ 2.045000] sdhci-pltfm: SDHCI platform and OF driver helper
  584. Jan 1 00:00:08 skylark user.info kernel: [ 2.055000] ledtrig-cpu: registered to indicate activity on CPUs
  585. Jan 1 00:00:08 skylark user.info kernel: [ 2.060000] usbcore: registered new interface driver usbhid
  586. Jan 1 00:00:08 skylark user.info kernel: [ 2.065000] usbhid: USB HID core driver
  587. Jan 1 00:00:08 skylark user.info kernel: [ 2.070000] ip_tables: (C) 2000-2006 Netfilter Core Team
  588. Jan 1 00:00:08 skylark user.info kernel: [ 2.080000] NET: Registered protocol family 10
  589. Jan 1 00:00:08 skylark user.info kernel: [ 2.085000] sit: IPv6 over IPv4 tunneling driver
  590. Jan 1 00:00:08 skylark user.info kernel: [ 2.090000] NET: Registered protocol family 17
  591. Jan 1 00:00:08 skylark user.info kernel: [ 2.095000] can: controller area network core (rev 20120528 abi 9)
  592. Jan 1 00:00:08 skylark user.info kernel: [ 2.100000] NET: Registered protocol family 29
  593. Jan 1 00:00:08 skylark user.info kernel: [ 2.105000] can: raw protocol (rev 20120528)
  594. Jan 1 00:00:08 skylark user.info kernel: [ 2.110000] can: broadcast manager protocol (rev 20120528 t)
  595. Jan 1 00:00:08 skylark user.info kernel: [ 2.115000] can: netlink gateway (rev 20130117) max_hops=1
  596. Jan 1 00:00:08 skylark user.notice kernel: [ 2.120000] Key type dns_resolver registered
  597. Jan 1 00:00:08 skylark user.info kernel: [ 2.130000] ThumbEE CPU extension supported.
  598. Jan 1 00:00:08 skylark user.notice kernel: [ 2.135000] Registering SWP/SWPB emulation handler
  599. Jan 1 00:00:08 skylark user.info kernel: [ 2.145000] usb0-vbus: supplied by vcc5v0
  600. Jan 1 00:00:08 skylark user.info kernel: [ 2.150000] ehci-platform 1c14000.usb: EHCI Host Controller
  601. Jan 1 00:00:08 skylark user.info kernel: [ 2.155000] ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
  602. Jan 1 00:00:08 skylark user.info kernel: [ 2.165000] ehci-platform 1c14000.usb: irq 22, io mem 0x01c14000
  603. Jan 1 00:00:08 skylark user.info kernel: [ 2.180000] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
  604. Jan 1 00:00:08 skylark user.info kernel: [ 2.185000] hub 1-0:1.0: USB hub found
  605. Jan 1 00:00:08 skylark user.info kernel: [ 2.190000] hub 1-0:1.0: 1 port detected
  606. Jan 1 00:00:08 skylark user.info kernel: [ 2.195000] ohci-platform 1c14400.usb: Generic Platform OHCI controller
  607. Jan 1 00:00:08 skylark user.info kernel: [ 2.200000] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 2
  608. Jan 1 00:00:08 skylark user.info kernel: [ 2.210000] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400
  609. Jan 1 00:00:08 skylark user.info kernel: [ 2.270000] hub 2-0:1.0: USB hub found
  610. Jan 1 00:00:08 skylark user.info kernel: [ 2.275000] hub 2-0:1.0: 1 port detected
  611. Jan 1 00:00:08 skylark user.warn kernel: [ 2.280000] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
  612. Jan 1 00:00:08 skylark user.debug kernel: [ 2.290000] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  613. Jan 1 00:00:08 skylark user.debug kernel: [ 2.290000] musb-hdrc: MHDRC RTL version 0.0
  614. Jan 1 00:00:08 skylark user.debug kernel: [ 2.290000] musb-hdrc: 11/11 max ep, 5184/8192 memory
  615. Jan 1 00:00:08 skylark user.info kernel: [ 2.290000] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  616. Jan 1 00:00:08 skylark user.info kernel: [ 2.295000] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
  617. Jan 1 00:00:08 skylark user.info kernel: [ 2.305000] hub 3-0:1.0: USB hub found
  618. Jan 1 00:00:08 skylark user.info kernel: [ 2.310000] hub 3-0:1.0: 1 port detected
  619. Jan 1 00:00:08 skylark user.info kernel: [ 2.315000] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
  620. Jan 1 00:00:08 skylark user.info kernel: [ 2.320000] sunxi-mmc 1c0f000.mmc: allocated mmc-pwrseq
  621. Jan 1 00:00:08 skylark user.info kernel: [ 2.360000] sunxi-mmc 1c0f000.mmc: base:0xe0a10000 irq:20
  622. Jan 1 00:00:08 skylark user.notice kernel: [ 2.365000] ubi0: attaching mtd5
  623. Jan 1 00:00:08 skylark user.err kernel: [ 2.375000] sunxi-mmc 1c0f000.mmc: smc 0 err, cmd 8, RTO !!
  624. Jan 1 00:00:08 skylark user.info kernel: [ 2.390000] mmc0: new high speed SDIO card at address 0001
  625. Jan 1 00:00:08 skylark user.info kernel: [ 2.515000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  626. Jan 1 00:00:08 skylark user.notice kernel: [ 3.435000] ubi0: scanning is finished
  627. Jan 1 00:00:08 skylark user.notice kernel: [ 3.450000] ubi0: attached mtd5 (name "UBI", size 7776 MiB)
  628. Jan 1 00:00:08 skylark user.notice kernel: [ 3.455000] ubi0: PEB size: 4194304 bytes (2048 KiB), LEB size: 2064384 bytes
  629. Jan 1 00:00:08 skylark user.notice kernel: [ 3.460000] ubi0: min./max. I/O unit sizes: 16384/16384, sub-page size 16384
  630. Jan 1 00:00:08 skylark user.notice kernel: [ 3.470000] ubi0: VID header offset: 16384 (aligned 16384), data offset: 32768
  631. Jan 1 00:00:08 skylark user.notice kernel: [ 3.475000] ubi0: good PEBs: 1910, bad PEBs: 34, corrupted PEBs: 0
  632. Jan 1 00:00:08 skylark user.notice kernel: [ 3.485000] ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
  633. Jan 1 00:00:08 skylark user.notice kernel: [ 3.490000] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 118795185
  634. Jan 1 00:00:08 skylark user.notice kernel: [ 3.500000] ubi0: available PEBs: 0, total reserved PEBs: 1910, PEBs reserved for bad PEB handling: 6
  635. Jan 1 00:00:08 skylark user.info kernel: [ 3.510000] hctosys: unable to open rtc device (rtc0)
  636. Jan 1 00:00:08 skylark user.info kernel: [ 3.520000] vcc3v0: disabling
  637. Jan 1 00:00:08 skylark user.info kernel: [ 3.520000] vcc3v3: disabling
  638. Jan 1 00:00:08 skylark user.notice kernel: [ 3.525000] ubi0: background thread "ubi_bgt0d" started, PID 59
  639. Jan 1 00:00:08 skylark user.info kernel: [ 3.530000] usb0-vbus: disabling
  640. Jan 1 00:00:08 skylark user.info kernel: [ 3.540000] Freeing unused kernel memory: 2916K (c0dff000 - c10d8000)
  641. Jan 1 00:00:08 skylark user.notice kernel: [ 4.500000] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "linux", R/O mode
  642. Jan 1 00:00:08 skylark user.notice kernel: [ 4.510000] UBIFS (ubi0:1): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  643. Jan 1 00:00:08 skylark user.notice kernel: [ 4.520000] UBIFS (ubi0:1): FS size: 189923328 bytes (181 MiB, 92 LEBs), journal size 18579457 bytes (17 MiB, 9 LEBs)
  644. Jan 1 00:00:08 skylark user.notice kernel: [ 4.530000] UBIFS (ubi0:1): reserved for root: 0 bytes (0 KiB)
  645. Jan 1 00:00:08 skylark user.notice kernel: [ 4.535000] UBIFS (ubi0:1): media format: w4/r0 (latest is w4/r0), UUID CEB429D2-5351-474F-84D8-A63960F7E9F2, small LPT model
  646. Jan 1 00:00:08 skylark user.notice kernel: [ 5.650000] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "root_1611231956", R/O mode
  647. Jan 1 00:00:08 skylark user.notice kernel: [ 5.660000] UBIFS (ubi0:2): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  648. Jan 1 00:00:08 skylark user.notice kernel: [ 5.670000] UBIFS (ubi0:2): FS size: 189923328 bytes (181 MiB, 92 LEBs), journal size 16515073 bytes (15 MiB, 6 LEBs)
  649. Jan 1 00:00:08 skylark user.notice kernel: [ 5.680000] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
  650. Jan 1 00:00:08 skylark user.notice kernel: [ 5.690000] UBIFS (ubi0:2): media format: w4/r0 (latest is w4/r0), UUID B867084A-7943-4220-90F3-9204E5C44443, small LPT model
  651. Jan 1 00:00:08 skylark user.notice kernel: [ 6.360000] UBIFS (ubi0:3): background thread "ubifs_bgt0_3" started, PID 112
  652. Jan 1 00:00:08 skylark user.notice kernel: [ 7.270000] UBIFS (ubi0:3): UBIFS: mounted UBI device 0, volume 3, name "conf"
  653. Jan 1 00:00:08 skylark user.notice kernel: [ 7.280000] UBIFS (ubi0:3): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  654. Jan 1 00:00:08 skylark user.notice kernel: [ 7.290000] UBIFS (ubi0:3): FS size: 47480832 bytes (45 MiB, 23 LEBs), journal size 16515073 bytes (15 MiB, 6 LEBs)
  655. Jan 1 00:00:08 skylark user.notice kernel: [ 7.300000] UBIFS (ubi0:3): reserved for root: 2242636 bytes (2190 KiB)
  656. Jan 1 00:00:08 skylark user.notice kernel: [ 7.305000] UBIFS (ubi0:3): media format: w4/r0 (latest is w4/r0), UUID 3912A463-A06C-4802-87C0-1B07191BB6D8, small LPT model
  657. Jan 1 00:00:08 skylark user.notice kernel: [ 7.350000] UBIFS (ubi0:4): background thread "ubifs_bgt0_4" started, PID 113
  658. Jan 1 00:00:08 skylark user.notice kernel: [ 8.015000] UBIFS (ubi0:4): UBIFS: mounted UBI device 0, volume 4, name "cache"
  659. Jan 1 00:00:08 skylark user.notice kernel: [ 8.020000] UBIFS (ubi0:4): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  660. Jan 1 00:00:08 skylark user.notice kernel: [ 8.030000] UBIFS (ubi0:4): FS size: 249790464 bytes (238 MiB, 121 LEBs), journal size 16515073 bytes (15 MiB, 6 LEBs)
  661. Jan 1 00:00:08 skylark user.notice kernel: [ 8.045000] UBIFS (ubi0:4): reserved for root: 4952683 bytes (4836 KiB)
  662. Jan 1 00:00:08 skylark user.notice kernel: [ 8.050000] UBIFS (ubi0:4): media format: w4/r0 (latest is w4/r0), UUID 736FEF1C-6845-4650-8F44-D015058DAC1C, small LPT model
  663. Jan 1 00:00:08 skylark user.notice kernel: [ 8.135000] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 114
  664. Jan 1 00:00:08 skylark user.notice kernel: [ 8.750000] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "appdata"
  665. Jan 1 00:00:08 skylark user.notice kernel: [ 8.760000] UBIFS (ubi0:5): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  666. Jan 1 00:00:08 skylark user.notice kernel: [ 8.770000] UBIFS (ubi0:5): FS size: 608993280 bytes (580 MiB, 295 LEBs), journal size 30965760 bytes (29 MiB, 15 LEBs)
  667. Jan 1 00:00:08 skylark user.notice kernel: [ 8.780000] UBIFS (ubi0:5): reserved for root: 4952683 bytes (4836 KiB)
  668. Jan 1 00:00:08 skylark user.notice kernel: [ 8.785000] UBIFS (ubi0:5): media format: w4/r0 (latest is w4/r0), UUID 160E85C3-9EAD-4E90-BE4D-4EEC9D7288A5, small LPT model
  669. Jan 1 00:00:08 skylark user.notice kernel: [ 8.825000] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 115
  670. Jan 1 00:00:08 skylark user.notice kernel: [ 9.585000] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "data"
  671. Jan 1 00:00:08 skylark user.notice kernel: [ 9.590000] UBIFS (ubi0:6): LEB size: 2064384 bytes (2016 KiB), min./max. I/O unit sizes: 16384 bytes/16384 bytes
  672. Jan 1 00:00:08 skylark user.notice kernel: [ 9.600000] UBIFS (ubi0:6): FS size: 2512355328 bytes (2395 MiB, 1217 LEBs), journal size 33030144 bytes (31 MiB, 16 LEBs)
  673. Jan 1 00:00:08 skylark user.notice kernel: [ 9.610000] UBIFS (ubi0:6): reserved for root: 4952683 bytes (4836 KiB)
  674. Jan 1 00:00:08 skylark user.notice kernel: [ 9.620000] UBIFS (ubi0:6): media format: w4/r0 (latest is w4/r0), UUID 06D87AFA-98F4-4985-9F87-CFAE3B31BDCF, small LPT model
  675. Jan 1 00:00:08 skylark user.info kernel: [ 11.285000] Adding 409596k swap on /dev/mtdblock4. Priority:-1 extents:1 across:409596k SS
  676. Jan 1 00:00:08 skylark user.warn kernel: [ 11.475000] using random self ethernet address
  677. Jan 1 00:00:08 skylark user.warn kernel: [ 11.480000] using random host ethernet address
  678. Jan 1 00:00:08 skylark user.info kernel: [ 11.510000] usb0: HOST MAC 16:4c:23:51:a8:d1
  679. Jan 1 00:00:08 skylark user.info kernel: [ 11.515000] usb0: MAC c6:cc:1f:b1:28:73
  680. Jan 1 00:00:08 skylark user.info kernel: [ 11.520000] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
  681. Jan 1 00:00:08 skylark user.info kernel: [ 11.525000] g_cdc gadget: g_cdc ready
  682. Jan 1 00:00:08 skylark daemon.info kernel: [ 12.500000] udevd[236]: starting version 3.1.5
  683. Jan 1 00:00:10 skylark user.warn kernel: [ 14.080000] RTL8723BS: module init start
  684. Jan 1 00:00:10 skylark user.warn kernel: [ 14.080000] RTL8723BS: rtl8723bs v4.3.5.5_12290.20140916_BTCOEX20140507-4E40
  685. Jan 1 00:00:10 skylark user.warn kernel: [ 14.090000] RTL8723BS: rtl8723bs BT-Coex version = BTCOEX20140507-4E40
  686. Jan 1 00:00:10 skylark user.warn kernel: [ 14.240000] RTL8723BS: rtw_ndev_init(wlan0)
  687. Jan 1 00:00:10 skylark user.warn kernel: [ 14.255000] RTL8723BS: module init ret =0
  688. Jan 1 00:00:11 skylark user.info kernel: [ 15.290000] cfg80211: World regulatory domain updated:
  689. Jan 1 00:00:11 skylark user.info kernel: [ 15.295000] cfg80211: DFS Master region: unset
  690. Jan 1 00:00:11 skylark user.info kernel: [ 15.300000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  691. Jan 1 00:00:11 skylark user.info kernel: [ 15.310000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  692. Jan 1 00:00:11 skylark user.info kernel: [ 15.320000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  693. Jan 1 00:00:11 skylark user.info kernel: [ 15.330000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  694. Jan 1 00:00:11 skylark user.info kernel: [ 15.335000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  695. Jan 1 00:00:11 skylark user.info kernel: [ 15.345000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  696. Jan 1 00:00:11 skylark user.info kernel: [ 15.355000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  697. Jan 1 00:00:11 skylark user.info kernel: [ 15.365000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  698. Jan 1 00:00:11 skylark user.info kernel: [ 15.370000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  699. Jan 1 00:00:12 skylark user.info kernel: [ 15.695000] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
  700. Jan 1 00:00:12 skylark user.info kernel: [ 15.980000] rtl8723bs: accquire FW from file:rtlwifi/rtl8723bs_nic.bin
  701. Jan 1 00:00:13 skylark user.info kernel: [ 17.325000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  702. Jan 1 00:00:15 skylark user.warn kernel: [ 18.985000] RTL8723BS: rtw_set_802_11_connect(wlan0) fw_state = 0x00000008
  703. Jan 1 00:00:15 skylark user.warn kernel: [ 19.215000] RTL8723BS: start auth
  704. Jan 1 00:00:15 skylark user.warn kernel: [ 19.220000] RTL8723BS: auth success, start assoc
  705. Jan 1 00:00:15 skylark user.warn kernel: [ 19.230000] RTL8723BS: rtw_cfg80211_indicate_connect(wlan0) BSS not found !!
  706. Jan 1 00:00:15 skylark user.warn kernel: [ 19.240000] RTL8723BS: assoc success
  707. Jan 1 00:00:15 skylark user.info kernel: [ 19.240000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  708. Jan 1 00:00:15 skylark user.warn kernel: [ 19.295000] RTL8723BS: send eapol packet
  709. Jan 1 00:00:15 skylark user.warn kernel: [ 19.320000] RTL8723BS: send eapol packet
  710. Jan 1 00:00:15 skylark user.warn kernel: [ 19.325000] RTL8723BS: set pairwise key camid:4, addr:50:6a:03:b1:1c:ca, kid:0, type:AES
  711. Jan 1 00:00:15 skylark user.warn kernel: [ 19.340000] RTL8723BS: set group key camid:5, addr:50:6a:03:b1:1c:ca, kid:1, type:AES
  712. Jan 1 00:00:15 skylark user.info kernel: [ 19.370000] cfg80211: Regulatory domain changed to country: US
  713. Jan 1 00:00:15 skylark user.info kernel: [ 19.375000] cfg80211: DFS Master region: FCC
  714. Jan 1 00:00:15 skylark user.info kernel: [ 19.380000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  715. Jan 1 00:00:15 skylark user.info kernel: [ 19.390000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
  716. Jan 1 00:00:15 skylark user.info kernel: [ 19.400000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
  717. Jan 1 00:00:15 skylark user.info kernel: [ 19.405000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
  718. Jan 1 00:00:15 skylark user.info kernel: [ 19.415000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
  719. Jan 1 00:00:15 skylark user.info kernel: [ 19.425000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
  720. Jan 1 00:00:15 skylark user.info kernel: [ 19.435000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
  721. Jan 1 00:00:17 skylark daemon.info ifplugd(eth0)[344]: ifplugd 0.28 initializing.
  722. Jan 1 00:00:18 skylark authpriv.info dropbear[348]: Running in background
  723. Jan 1 00:00:18 skylark authpriv.info dropbear[357]: Child connection from 192.168.1.8:53876
  724. Jan 1 00:00:18 skylark daemon.info ifplugd(eth0)[344]: Using interface eth0
  725. Jan 1 00:00:18 skylark daemon.info dnsmasq[369]: started, version 2.75 cachesize 150
  726. Jan 1 00:00:18 skylark daemon.info dnsmasq[369]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua no-TFTP no-conntrack ipset auth no-DNSSEC loop-detect inotify
  727. Jan 1 00:00:18 skylark daemon.info dnsmasq-dhcp[369]: DHCP, IP range 10.10.10.100 -- 10.10.10.254, lease time 1h
  728. Jan 1 00:00:18 skylark daemon.info dnsmasq[369]: cleared cache
  729. Jan 1 00:00:18 skylark user.notice cleanup: Needs 204800 KiB, but there is already 2278676 KiB, nothing to do
  730. Jan 1 00:00:19 skylark user.err ondd: [main] Unable to load config: /mnt/data/ondd.conf (null)
  731. Jan 1 00:00:19 skylark user.info ondd[393]: [main] v2.8.0
  732. Jan 1 00:00:19 skylark daemon.info ifplugd(eth0)[344]: Initialization complete, link beat not detected.
  733. Jan 1 00:00:22 skylark daemon.info init: starting pid 479, tty '/dev/ttyS0': '/sbin/getty -L ttyS0 115200 vt100 '
  734. Jan 1 00:00:22 skylark daemon.info init: starting pid 482, tty '/dev/ttyGS0': '/sbin/getty -L ttyGS0 115200 vt100 '
  735. Jan 1 00:00:22 skylark daemon.info init: starting pid 483, tty '/dev/tty0': '/sbin/getty -L tty0 115200 vt100 '
  736. Jan 1 00:00:29 skylark authpriv.notice dropbear[357]: Password auth succeeded for 'outernet' from 192.168.1.8:53876
  737. Jan 1 00:00:29 skylark authpriv.warn dropbear[569]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directory
  738. Jan 1 00:00:29 skylark authpriv.warn dropbear[569]: lastlog_openseek: /var/log/lastlog is not a file or directory!
  739. Jan 1 00:00:34 skylark authpriv.info dropbear[357]: Exit (outernet): Exited normally
  740. Jan 1 00:00:51 skylark user.info ondd[393]: [carousel] setting time
  741. Dec 6 19:36:01 skylark authpriv.info dropbear[9289]: Child connection from 192.168.1.8:54123
  742. Dec 6 19:36:08 skylark authpriv.notice dropbear[9289]: Password auth succeeded for 'outernet' from 192.168.1.8:54123
  743. Dec 6 19:36:08 skylark authpriv.warn dropbear[9380]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directory
  744. Dec 6 19:36:08 skylark authpriv.warn dropbear[9380]: lastlog_openseek: /var/log/lastlog is not a file or directory!
  745. Dec 6 19:38:04 skylark authpriv.notice sudo: outernet : TTY=pts/1 ; PWD=/tmp/screens ; USER=root ; COMMAND=/bin/su -
  746. Dec 6 19:38:04 skylark auth.notice su: + /dev/pts/1 outernet:root
  747. [rxOS][outernet@skylark:/tmp/screens]$ sudo su -
  748. Password:
  749. [rxOS][root@skylark:~]# ps -la
  750. PID USER COMMAND
  751. 1 root init
  752. 2 root [kthreadd]
  753. 3 root [ksoftirqd/0]
  754. 5 root [kworker/0:0H]
  755. 7 root [rcu_sched]
  756. 8 root [rcu_bh]
  757. 9 root [migration/0]
  758. 10 root [watchdog/0]
  759. 11 root [kdevtmpfs]
  760. 12 root [perf]
  761. 13 root [khungtaskd]
  762. 14 root [writeback]
  763. 15 root [crypto]
  764. 16 root [bioset]
  765. 17 root [kblockd]
  766. 18 root [ata_sff]
  767. 19 root [edac-poller]
  768. 20 root [devfreq_wq]
  769. 21 root [rpciod]
  770. 23 root [kswapd0]
  771. 24 root [vmstat]
  772. 25 root [fsnotify_mark]
  773. 26 root [nfsiod]
  774. 35 root [bioset]
  775. 36 root [bioset]
  776. 37 root [bioset]
  777. 38 root [bioset]
  778. 39 root [bioset]
  779. 40 root [bioset]
  780. 41 root [bioset]
  781. 42 root [bioset]
  782. 43 root [bioset]
  783. 44 root [bioset]
  784. 45 root [bioset]
  785. 46 root [bioset]
  786. 47 root [bioset]
  787. 48 root [bioset]
  788. 49 root [kpsmoused]
  789. 50 root [kworker/u2:1]
  790. 51 root [irq/65-axp20x_i]
  791. 52 root [irq/33-2-0038]
  792. 53 root [w1_bus_master1]
  793. 54 root [ipv6_addrconf]
  794. 56 root [deferwq]
  795. 57 root [irq/20-sunxi-mm]
  796. 59 root [ubi_bgt0d]
  797. 80 root [loop0]
  798. 112 root [ubifs_bgt0_3]
  799. 113 root [ubifs_bgt0_4]
  800. 114 root [ubifs_bgt0_5]
  801. 115 root [ubifs_bgt0_6]
  802. 125 root multifs -o nonempty,allow_other /mnt/external,/mnt/internal /mnt/downloads
  803. 133 root [kworker/0:1H]
  804. 232 root /sbin/syslogd -n
  805. 235 root /sbin/klogd -n
  806. 237 root /sbin/udevd -d
  807. 257 root [cfg80211]
  808. 258 root [ksdioirqd/mmc0]
  809. 304 root [RTW_XMIT_THREAD]
  810. 305 root [RTW_CMD_THREAD]
  811. 306 root [RTWHALXT]
  812. 307 root wpa_supplicant -B -P /var/run/wpa-wlan0.pid -c /etc/wpa_supplicant.conf -i wlan0
  813. 332 root udhcpc -n -p /run/udhcpc.wlan0.pid -i wlan0 -x hostname skylark
  814. 344 root /usr/sbin/ifplugd -i eth0 -fI -u0 -d10
  815. 348 root /usr/sbin/dropbear -wR
  816. 350 root /usr/bin/node /usr/lib/node_modules/ui2/server/server.js www --root /usr/share -p 80
  817. 358 root vsftpd
  818. 369 nobody /usr/sbin/dnsmasq
  819. 371 root {S90cleanup} /bin/sh /etc/init.d/S90cleanup start
  820. 385 root sleep 3600
  821. 393 root /usr/sbin/ondd -d --pid-file /var/run/ondd.pid --cfg-file /mnt/data/ondd.conf -c /mnt/cache -o /mnt/downloads -D /var/run/ondd.data --sdr-timeout-handler /usr/sbin/ontimeout
  822. 424 root {screen} /usr/bin/SCREEN -T vt100 -dmS sdr /usr/sbin/demod
  823. 438 root {S99incrond} /bin/sh /etc/init.d/S99incrond start
  824. 441 root inotifywait -m -r /mnt/downloads/opaks --format %w%f -e close_write -e moved_to
  825. 442 root {S99incrond} /bin/sh /etc/init.d/S99incrond start
  826. 448 root {demod} /bin/sh /usr/sbin/demod
  827. 449 root {demod} /bin/sh /opt/sdr/demod -f 1539.8725 -r 4200 -o /var/run/ondd.data
  828. 454 root {S99incrond} /bin/sh /etc/init.d/S99incrond start
  829. 457 root inotifywait -m -r /mnt/downloads/grib2 --format %w%f -e close_write -e moved_to
  830. 458 root {S99incrond} /bin/sh /etc/init.d/S99incrond start
  831. 479 root /sbin/getty -L ttyS0 115200 vt100
  832. 482 root /sbin/getty -L ttyGS0 115200 vt100
  833. 483 root /sbin/getty -L tty0 115200 vt100
  834. 486 root /opt/sdr/demod_bin -f 1539.8725 -r 4200 -o /var/run/ondd.data
  835. 4113 root [kworker/0:0]
  836. 7907 root [kworker/u2:2]
  837. 9289 root /usr/sbin/dropbear -wR
  838. 9380 outernet -sh
  839. 9906 root [kworker/u2:3]
  840. 11861 root [kworker/0:1]
  841. 15651 root [kworker/u2:0]
  842. 15750 root [kworker/0:2]
  843. 16515 root -sh
  844. 16598 root ps -la
  845. [rxOS][root@skylark:~]#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!