lauri@v6sa.ath.cx ~/backfire-dbe60/bin/x86 $ qemu -initrd openwrt-x86-generic-rootfs-squashfs.img -kernel openwrt-x86-generic-vmlinuz -m 1024 -serial stdio -append "console=ttyS0 root=/dev/ram0 ramdisk_size=16384 rootwait" -nographic -nodefaults
Linux version 2.6.32.25 (lauri@v6sa.ath.cx) (gcc version 4.3.4 (GCC) ) #1 Fri Nov 19 19:09:33 EET 2010
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
  UMC UMC UMC UMC
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
 BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
 BIOS-e820: 000000003fffd000 - 0000000040000000 (reserved)
 BIOS-e820: 00000000fffbc000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x3fffd max_arch_pfn = 0x100000
Warning only 895MB will be used.
Use a HIGHMEM enabled kernel.
init_memory_mapping: 0000000000000000-0000000037fa1000
RAMDISK: 3f6df000 - 3ffef004
Allocated new RAMDISK: 00100000 - 00a10004
Move RAMDISK from 000000003f6df000 - 000000003ffef003 to 00100000 - 00a10003
ACPI: RSDP 000f8950 00014 (v00 BOCHS )
ACPI: RSDT 3fffde30 00034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 3ffffe70 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 3fffdfd0 01E22 (v01   BXPC   BXDSDT 00000001 INTL 20090123)
ACPI: FACS 3ffffe00 00040
ACPI: SSDT 3fffdf90 00037 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 3fffdeb0 00072 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 3fffde70 00038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
895MB LOWMEM available.
  mapped low ram: 0 - 37fa1000
  low ram: 0 - 37fa1000
  node 0 low ram: 00000000 - 37fa1000
  node 0 bootmap 00008000 - 0000eff8
(7 early reservations) ==> bootmem [0000000000 - 0037fa1000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0001000000 - 0001335b20]    TEXT DATA BSS ==> [0001000000 - 0001335b20]
  #2 [000009f400 - 0000100000]    BIOS reserved ==> [000009f400 - 0000100000]
  #3 [0001336000 - 000133c049]              BRK ==> [0001336000 - 000133c049]
  #4 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
  #5 [0000100000 - 0000a10004]      NEW RAMDISK ==> [0000100000 - 0000a10004]
  #6 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
found SMP MP-table at [c00f89a0] f89a0
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x00037fa1
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x00037fa1
Using APIC driver default
ACPI: PM-Timer IO Port: 0xb008
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Allocating PCI resources starting at 40000000 (gap: 40000000:bffbc000)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227392
Kernel command line: console=ttyS0 root=/dev/ram0 ramdisk_size=16384 rootwait
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Memory: 895920k/917124k available (2185k kernel code, 20584k reserved, 652k data, 292k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
    vmalloc : 0xf87a1000 - 0xfffa1000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7fa1000   ( 895 MB)
      .init : 0xc12c6000 - 0xc130f000   ( 292 kB)
      .data : 0xc122271c - 0xc12c5900   ( 652 kB)
      .text : 0xc1000000 - 0xc122271c   (2185 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:288
Console: colour dummy device 80x25
console [ttyS0] enabled
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 2812.718 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5625.43 BogoMIPS (lpj=28127180)
Mount-cache hash table entries: 512
CPU: AMD 06/03 stepping 03
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xffe77, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.3: quirk: region b000-b03f claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: region b100-b10f claimed by PIIX4 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (junk in compressed archive); looks like an initrd
Freeing initrd memory: 9280k freed
scx200: NatSemi SCx200 Driver
microcode: no support for this CPU vendor
------------[ cut here ]------------
WARNING: at arch/x86/mm/ioremap.c:148 0xc101a008()
Hardware name: Bochs
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.32.25 #1
Call Trace:
 [<c101a008>] ? 0xc101a008
 [<c101a008>] ? 0xc101a008
 [<c1023040>] ? 0xc1023040
 [<c101a008>] ? 0xc101a008
 [<c10230a3>] ? 0xc10230a3
 [<c101a008>] ? 0xc101a008
 [<c12d773f>] ? 0xc12d773f
 [<c101a314>] ? 0xc101a314
 [<c12d775a>] ? 0xc12d775a
 [<c12d775a>] ? 0xc12d775a
 [<c100105a>] ? 0xc100105a
 [<c12c6246>] ? 0xc12c6246
 [<c12c61b8>] ? 0xc12c61b8
 [<c1003367>] ? 0xc1003367
---[ end trace a7919e7f17c0a725 ]---
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 1768
io scheduler noop registered
io scheduler deadline registered (default)
processor LNXCPU:00: registered as cooling_device0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Non-volatile memory driver v1.3
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc000 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc008 irq 15
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
cpuidle: using governor ladder
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 9157KiB [1 disk] into ram disk... done.
VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
Freeing unused kernel memory: 292k freed
Please be patient, while OpenWrt loads ...
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. Compat-wireless backport release: compat-wireless-2010-10-14-7-gab01eca
Backport based on wireless-testing.git master-2010-10-19
cfg80211: Calling CRDA to update world regulatory domain
natsemi dp8381x driver, version 2.1, Sept 11, 2006
  originally by Donald Becker <becker@scyld.com>
  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rt2800usb
NTFS driver 2.1.29 [Flags: R/O MODULE].
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
nf_conntrack version 0.5.0 (14151 buckets, 56604 max)
8139too Fast Ethernet driver 0.9.28
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
sis900.c: v1.08.10 Apr. 2 2006
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
usbcore: registered new interface driver snd-usb-audio
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
fuse init (API version 7.13)
cs5535_gpio: DIVIL not found
dropbearkey[807]: segfault at 7f06331e ip b77e7012 sp bf83186b error 4 in libutil-0.9.30.1.so[b77e7000+5000]
ssh-keygen[809]: segfault at 7f5f8cae ip b772b012 sp bfafc4fb error 4 in libutil-0.9.30.1.so[b772b000+5000]
amixer[844]: segfault at b76ed000 ip b780ae01 sp bfb35120 error 4 in ld-uClibc-0.9.30.1.so[b780a000+4000]
mpd[845]: segfault at b7701000 ip b7713e01 sp bfe311a0 error 4 in ld-uClibc-0.9.30.1.so[b7713000+4000]
Clocksource tsc unstable (delta = -65993989 ns)
Switching to clocksource hpet