SHARE
TWEET

dmesg TWRP Recovery (normal/works)

a guest Jul 11th, 2019 87 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. <6>[    0.000000] Booting Linux on physical CPU 0
  2.  
  3. <6>[    0.000000] Initializing cgroup subsys cpu
  4.  
  5. <5>[    0.000000] Linux version 3.4.0-ElementalX-N7-5.08 (dees_troy@XPS12-Ubuntu) (gcc version 4.8 (GCC) ) #32 SMP PREEMPT Tue Feb 2 19:56:18 CST 2016
  6.  
  7. <4>[    0.000000] CPU: ARMv7 Processor [511f06f0] revision 0 (ARMv7), cr=10c5387d
  8.  
  9. <4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  10.  
  11. <4>[    0.000000] Machine: QCT APQ8064 FLO
  12.  
  13. <2>[    0.000000] Truncating memory at 0x90000000 to fit in 32-bit physical address space
  14.  
  15. <6>[    0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
  16.  
  17. <6>[    0.000000] Hardboot page reserved at 0x88C00000
  18.  
  19. <6>[    0.000000] Initialized persistent memory from 88d00000-88dfffff
  20.  
  21. <6>[    0.000000] cma: CMA: reserved 16 MiB at af800000
  22.  
  23. <4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
  24.  
  25. <6>[    0.000000] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
  26.  
  27. <6>[    0.000000]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
  28.  
  29. <7>[    0.000000] On node 0 totalpages: 482047
  30.  
  31. <7>[    0.000000]   Normal zone: 1556 pages used for memmap
  32.  
  33. <7>[    0.000000]   Normal zone: 0 pages reserved
  34.  
  35. <7>[    0.000000]   Normal zone: 161516 pages, LIFO batch:31
  36.  
  37. <7>[    0.000000]   HighMem zone: 2536 pages used for memmap
  38.  
  39. <7>[    0.000000]   HighMem zone: 316439 pages, LIFO batch:31
  40.  
  41. <6>[    0.000000] allocating 44236800 bytes at c29fa000 (82bfa000 physical) for fb
  42.  
  43. <6>[    0.000000] PERCPU: Embedded 9 pages/cpu @c542d000 s15744 r8192 d12928 u36864
  44.  
  45. <7>[    0.000000] pcpu-alloc: s15744 r8192 d12928 u36864 alloc=9*4096
  46.  
  47. <7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  48.  
  49. <4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 477955
  50.  
  51. <5>[    0.000000] Kernel command line: androidboot.hardware=flo user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.selinux=permissiveÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿPAEHXÚ ‰| androidboot.emmc=true androidboot.serialno=0a1bb046 bootreason=Reboot fuse_info=Y ddr_vendor=elpida androidboot.baseband=apq asustek.hw_rev=rev_e androidboot.bootloader=FLO-04.08
  52.  
  53. <6>[    0.000000] HW Revision: ASUSTek input rev_e
  54.  
  55. <6>[    0.000000] HW Revision: ASUSTek matched rev_e
  56.  
  57. <6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  58.  
  59. <6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  60.  
  61. <6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  62.  
  63. <6>[    0.000000] Memory: 138MB 1MB 58MB 4MB 7MB 254MB 1420MB = 1882MB total
  64.  
  65. <5>[    0.000000] Memory: 1831328k/1952160k available, 96860k reserved, 1275900K highmem
  66.  
  67. <5>[    0.000000] Virtual kernel memory layout:
  68.  
  69. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  70.  
  71. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  72.  
  73. <5>[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  74.  
  75. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  76.  
  77. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  78.  
  79. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  80.  
  81. <5>[    0.000000]       .text : 0xc0008000 - 0xc09f2ec4   (10156 kB)
  82.  
  83. <5>[    0.000000]       .init : 0xc0a00000 - 0xc0b03d80   (1040 kB)
  84.  
  85. <5>[    0.000000]       .data : 0xc0b04000 - 0xc0c14a38   (1091 kB)
  86.  
  87. <5>[    0.000000]        .bss : 0xc0c14a5c - 0xc0da1d9c   (1589 kB)
  88.  
  89. <6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-0, MinObjects=0, CPUs=4, Nodes=1
  90.  
  91. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  92.  
  93. <6>[    0.000000]   RCU dyntick-idle grace-period acceleration is enabled.
  94.  
  95. <6>[    0.000000] NR_IRQS:1177
  96.  
  97. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  98.  
  99. <6>[    0.000000] Console: colour dummy device 80x30
  100.  
  101. <6>[    0.000000] console [tty0] enabled
  102.  
  103. <6>[    0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67664)
  104.  
  105. <6>[    0.150207] pid_max: default: 32768 minimum: 301
  106.  
  107. <6>[    0.150512] Security Framework initialized
  108.  
  109. <6>[    0.150512] SELinux:  Initializing.
  110.  
  111. <7>[    0.150634] SELinux:  Starting in permissive mode
  112.  
  113. <6>[    0.150726] Mount-cache hash table entries: 512
  114.  
  115. <6>[    0.151977] Initializing cgroup subsys cpuacct
  116.  
  117. <6>[    0.152008] Initializing cgroup subsys freezer
  118.  
  119. <6>[    0.152069] CPU: Testing write buffer coherency: ok
  120.  
  121. <6>[    0.152313] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  122.  
  123. <6>[    0.152343] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
  124.  
  125. <6>[    0.152435] Setting up static identity map for 0x808f87b8 - 0x808f8840
  126.  
  127. <6>[    0.162536] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  128.  
  129. <6>[    0.171813] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  130.  
  131. <6>[    0.173645] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  132.  
  133. <6>[    0.173767] Brought up 4 CPUs
  134.  
  135. <6>[    0.173828] SMP: Total of 4 processors activated (54.13 BogoMIPS).
  136.  
  137. <6>[    0.188537] dummy:
  138.  
  139. <6>[    0.189971] NET: Registered protocol family 16
  140.  
  141. <6>[    0.196838] DMA: preallocated 1792 KiB pool for atomic coherent allocations
  142.  
  143. <3>[    0.197204] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  144.  
  145. <5>[    0.200592] MIDR      = 0x511f06f0
  146.  
  147. <6>[    0.200653] meminfo_init: smem ram ptable found: ver: 0 len: 5
  148.  
  149. <6>[    0.200683] Found 1 memory banks grouped into 8 memory regions
  150.  
  151. <6>[    0.201019] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
  152.  
  153. <6>[    0.201843] socinfo_init: v7, id=172, ver=2.0, raw_id=2289, raw_ver=2289, hw_plat=8, hw_plat_ver=65536
  154.  
  155. <6>[    0.201843]  accessory_chip=0, hw_plat_subtype=0, pmic_model=18, pmic_die_revision=4
  156.  
  157. <6>[    0.201965] msm_rpm_init: RPM firmware 3.0.16842936
  158.  
  159. <3>[    0.222106] msm_rpm_get_status(): Status id 433 not defined for target
  160.  
  161. <3>[    0.222137] msm_rpm_get_status(): Status id 433 not defined for target
  162.  
  163. <3>[    0.222167] msm_rpm_get_status(): Status id 433 not defined for target
  164.  
  165. <3>[    0.222167] msm_rpm_get_status(): Status id 433 not defined for target
  166.  
  167. <3>[    0.222198] msm_rpm_get_status(): Status id 433 not defined for target
  168.  
  169. <3>[    0.222229] msm_rpm_get_status(): Status id 433 not defined for target
  170.  
  171. <3>[    0.222229] msm_rpm_get_status(): Status id 433 not defined for target
  172.  
  173. <3>[    0.222259] msm_rpm_get_status(): Status id 433 not defined for target
  174.  
  175. <6>[    0.239746] ASUSTek: Bypassing PCB_ID3
  176.  
  177. <6>[    0.239807] ASUSTek: PCBID=141
  178.  
  179. <6>[    0.240753] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en
  180.  
  181. <6>[    0.240966] pm8921_probe: PMIC revision 1: F4
  182.  
  183. <6>[    0.240997] pm8921_probe: PMIC revision 2: 06
  184.  
  185. <6>[    0.241027] pm8921_probe: PMIC version: PM8921 rev 3.0
  186.  
  187. <6>[    0.241058] pm8921_probe: PMIC Restart Reason: Triggered from KPD (power key press)
  188.  
  189. <6>[    0.242126] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
  190.  
  191. <6>[    0.242645] pm_gpio_probe: OK: base=152, ngpio=44
  192.  
  193. <6>[    0.242919] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
  194.  
  195. <6>[    0.243011] pm8xxx_mpp_probe: OK: base=196, ngpio=12
  196.  
  197. <6>[    0.244720] pm8821_probe: PMIC revision 1: PM8821 rev F3
  198.  
  199. <6>[    0.244750] pm8821_probe: PMIC revision 2: PM8821 rev 0B
  200.  
  201. <6>[    0.244750] pm8821_probe: PMIC version: PM8821 ver 2.1
  202.  
  203. <6>[    0.245300] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
  204.  
  205. <6>[    0.245361] pm8xxx_mpp_probe: OK: base=208, ngpio=4
  206.  
  207. <3>[    0.245635] gpio_vreg_probe: gpio_label required.
  208.  
  209. <4>[    0.245666] msm-gpio-regulator: probe of msm-gpio-regulator.174 failed with error -22
  210.  
  211. <6>[    0.246826] saw_probe: id=0, name=8921_s5
  212.  
  213. <6>[    0.247192] saw_probe: id=1, name=8921_s6
  214.  
  215. <6>[    0.247528] saw_probe: id=2, name=8821_s0
  216.  
  217. <6>[    0.247863] saw_probe: id=3, name=8821_s1
  218.  
  219. <3>[    0.255645] Sensors:DSPS: initial dsps.
  220.  
  221. <4>[    0.256591] [ELAN] Touch dirver register
  222.  
  223. <6>[    0.256927] persistent_ram: found existing buffer, size 38492, start 38492
  224.  
  225. <6>[    0.383605] console [ram-1] enabled
  226.  
  227. <4>[    0.384155] apq8064_init_fb: lcd_type=0
  228.  
  229. <6>[    0.384429] apq8064_init_fb: register mipi_JDI_panel_device
  230.  
  231. <3>[    0.385681] msm_gpiomux_install: write failure: -22
  232.  
  233. <3>[    0.385864] msm_gpiomux_install: write failure: -22
  234.  
  235. <3>[    0.385986] msm_gpiomux_install: write failure: -22
  236.  
  237. <3>[    0.386077] msm_gpiomux_install: write failure: -22
  238.  
  239. <3>[    0.386260] msm_gpiomux_install: write failure: -22
  240.  
  241. <3>[    0.386383] msm_gpiomux_install: write failure: -22
  242.  
  243. <6>[    0.387329] Registering gpio keys
  244.  
  245. <6>[    0.387420] Reconfigure VOL_UP(GPIO155) and VOL_DOWN(GPIO189) with PMIC
  246.  
  247. <4>[    0.387725] 8921_l17: Failed to create debugfs directory
  248.  
  249. <4>[    0.389282] ------------[ cut here ]------------
  250.  
  251. <4>[    0.389495] WARNING: at arch/arm/mach-msm/subsystem_restart.c:573 subsys_restart_init+0xd8/0x108()
  252.  
  253. <4>[    0.389617] Modules linked in:
  254.  
  255. <4>[    0.389892] [<c00148ec>] (unwind_backtrace+0x0/0xe0) from [<c0073218>] (warn_slowpath_common+0x4c/0x64)
  256.  
  257. <4>[    0.390014] [<c0073218>] (warn_slowpath_common+0x4c/0x64) from [<c00732c0>] (warn_slowpath_null+0x18/0x20)
  258.  
  259. <4>[    0.390228] [<c00732c0>] (warn_slowpath_null+0x18/0x20) from [<c0a0c35c>] (subsys_restart_init+0xd8/0x108)
  260.  
  261. <4>[    0.390441] [<c0a0c35c>] (subsys_restart_init+0xd8/0x108) from [<c0008700>] (do_one_initcall+0x8c/0x150)
  262.  
  263. <4>[    0.390655] [<c0008700>] (do_one_initcall+0x8c/0x150) from [<c0a00a14>] (kernel_init+0xf8/0x1ac)
  264.  
  265. <4>[    0.390838] [<c0a00a14>] (kernel_init+0xf8/0x1ac) from [<c000eda8>] (kernel_thread_exit+0x0/0x8)
  266.  
  267. <4>[    0.391052] ---[ end trace 3e07c34b1dad1296 ]---
  268.  
  269. <6>[    0.393402] sps:BAM 0x12244000 enabled: ver:0x5, number of pipes:20
  270.  
  271. <6>[    0.393615] sps:BAM 0x12244000 is registered.
  272.  
  273. <6>[    0.394226] sps:sps is ready.
  274.  
  275. <6>[    0.423065] bio: create slab <bio-0> at 0
  276.  
  277. <6>[    0.423858] vgaarb: loaded
  278.  
  279. <6>[    0.424133] ION heap vmalloc created
  280.  
  281. <6>[    0.424255] ION heap mm created at a0000000 with size 5c00000
  282.  
  283. <6>[    0.424438] ION heap mm_fw created at 9fe00000 with size 1e0000
  284.  
  285. <6>[    0.424560] ION heap mfc created at a5c00000 with size 2000
  286.  
  287. <6>[    0.424774] ION heap iommu created
  288.  
  289. <6>[    0.424926] ION heap qsecom created at fea07000 with size 780000
  290.  
  291. <6>[    0.425048] ION heap audio created at ff187000 with size 4cf000
  292.  
  293. <5>[    0.426391] pm8xxx_pwm_probe: OK
  294.  
  295. <5>[    0.427124] SCSI subsystem initialized
  296.  
  297. <6>[    0.427581] sps:BAM 0x28084000 enabled: ver:0x12, number of pipes:31
  298.  
  299. <6>[    0.427703] sps:BAM 0x28084000 is registered.
  300.  
  301. <6>[    0.431304] usbcore: registered new interface driver usbfs
  302.  
  303. <6>[    0.431671] usbcore: registered new interface driver hub
  304.  
  305. <6>[    0.431915] usbcore: registered new device driver usb
  306.  
  307. <6>[    0.432189] Linux media interface: v0.10
  308.  
  309. <6>[    0.432403] Linux video capture interface: v2.00
  310.  
  311. <7>[    0.432952] Registered led device: white
  312.  
  313. <6>[    0.433715] apq8064_pm8921_pwm_init+
  314.  
  315. <6>[    0.433868] apq8064_pm8921_pwm_init-
  316.  
  317. <6>[    0.434631] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
  318.  
  319. <6>[    0.434936] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
  320.  
  321. <6>[    0.435150] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
  322.  
  323. <6>[    0.435485] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
  324.  
  325. <6>[    0.435760] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
  326.  
  327. <6>[    0.436004] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
  328.  
  329. <6>[    0.436279] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
  330.  
  331. <6>[    0.436584] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
  332.  
  333. <6>[    0.436828] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
  334.  
  335. <6>[    0.437133] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
  336.  
  337. <6>[    0.437377] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
  338.  
  339. <6>[    0.437683] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
  340.  
  341. <6>[    0.438232] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
  342.  
  343. <6>[    0.438446] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
  344.  
  345. <6>[    0.438781] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
  346.  
  347. <6>[    0.439117] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
  348.  
  349. <6>[    0.439392] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
  350.  
  351. <6>[    0.439727] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
  352.  
  353. <6>[    0.439971] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
  354.  
  355. <6>[    0.440277] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
  356.  
  357. <6>[    0.440612] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
  358.  
  359. <6>[    0.440826] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
  360.  
  361. <6>[    0.441162] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
  362.  
  363. <6>[    0.441406] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
  364.  
  365. <6>[    0.441741] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
  366.  
  367. <6>[    0.442077] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
  368.  
  369. <6>[    0.442352] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
  370.  
  371. <6>[    0.442779] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
  372.  
  373. <6>[    0.443145] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
  374.  
  375. <6>[    0.443389] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
  376.  
  377. <6>[    0.443725] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
  378.  
  379. <6>[    0.444061] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
  380.  
  381. <6>[    0.444458] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
  382.  
  383. <6>[    0.444763] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
  384.  
  385. <6>[    0.445007] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
  386.  
  387. <6>[    0.445281] Advanced Linux Sound Architecture Driver Version 1.0.25.
  388.  
  389. <6>[    0.446594] Switching to clocksource gp_timer
  390.  
  391. <6>[    0.486389] NET: Registered protocol family 2
  392.  
  393. <6>[    0.486999] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  394.  
  395. <6>[    0.488067] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  396.  
  397. <6>[    0.490234] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  398.  
  399. <6>[    0.491638] TCP: Hash tables configured (established 131072 bind 65536)
  400.  
  401. <6>[    0.491943] TCP: reno registered
  402.  
  403. <6>[    0.492095] UDP hash table entries: 512 (order: 2, 16384 bytes)
  404.  
  405. <6>[    0.492309] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  406.  
  407. <6>[    0.493072] NET: Registered protocol family 1
  408.  
  409. <6>[    0.493743] RPC: Registered named UNIX socket transport module.
  410.  
  411. <6>[    0.494049] RPC: Registered udp transport module.
  412.  
  413. <6>[    0.494201] RPC: Registered tcp transport module.
  414.  
  415. <6>[    0.494476] RPC: Registered tcp NFSv4.1 backchannel transport module.
  416.  
  417. <7>[    0.494659] PCI: CLS 0 bytes, default 64
  418.  
  419. <6>[    0.495086] Trying to unpack rootfs image as initramfs...
  420.  
  421. <6>[    1.019592] Freeing initrd memory: 5092K
  422.  
  423. <6>[    1.022277] Detected 9 counters on the L2CC PMU.
  424.  
  425. <6>[    1.024108] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
  426.  
  427. <6>[    1.025482] pil_riva pil_riva: using secure boot
  428.  
  429. <6>[    1.027648] pil_dsps pil_dsps: using secure boot
  430.  
  431. <6>[    1.028808] pil_gss pil_gss: using secure boot
  432.  
  433. <3>[    1.030761] smd_channel_probe_worker: allocation table not initialized
  434.  
  435. <6>[    1.036499] msm_dsps driver version 4.03.
  436.  
  437. <6>[    1.038146] NET: Registered protocol family 27
  438.  
  439. <1>[    1.040893] dma_test_init, minor number 98
  440.  
  441. <6>[    1.041168] lpass_fatal_init: lpass SSR driver init'ed.
  442.  
  443. <6>[    1.041412] wcnss_8960: module initialized
  444.  
  445. <6>[    1.041870] gss_8064_init: gss fatal driver init'ed.
  446.  
  447. <6>[    1.042480] acpuclk-8064 acpuclk-8064: SPEED BIN: 14
  448.  
  449. <6>[    1.042663] acpuclk-8064 acpuclk-8064: ACPU PVS: 3
  450.  
  451. <6>[    1.045227] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
  452.  
  453. <6>[    1.045410] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
  454.  
  455. <6>[    1.045532] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
  456.  
  457. <6>[    1.045745] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
  458.  
  459. <5>[    1.048339] msm_rpm_log_probe: OK
  460.  
  461. <6>[    1.051452] usbcore: registered new interface driver hsic_sysmon
  462.  
  463. <6>[    1.051971] audit: initializing netlink socket (disabled)
  464.  
  465. <5>[    1.052215] type=2000 audit(1.040:1): initialized
  466.  
  467. <4>[    1.053527] highmem bounce pool size: 64 pages
  468.  
  469. <5>[    1.062591] NFS: Registering the id_resolver key type
  470.  
  471. <6>[    1.064910] NTFS driver 2.1.30 [Flags: R/W].
  472.  
  473. <6>[    1.065795] fuse init (API version 7.18)
  474.  
  475. <6>[    1.072601] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  476.  
  477. <6>[    1.072875] io scheduler noop registered
  478.  
  479. <6>[    1.073272] io scheduler deadline registered (default)
  480.  
  481. <6>[    1.073516] io scheduler row registered
  482.  
  483. <6>[    1.073791] io scheduler cfq registered
  484.  
  485. <6>[    1.074218] io scheduler fiops registered
  486.  
  487. <6>[    1.074462] io scheduler sio registered
  488.  
  489. <6>[    1.078643] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
  490.  
  491. <6>[    1.079071] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf00fc000
  492.  
  493. <6>[    1.079589] mipi_JDI_1080P_pt_init+
  494.  
  495. <6>[    1.080261] mipi_JDI_lcd_probe+
  496.  
  497. <6>[    1.080505] mipi_JDI_lcd_probe, hw_revision=0
  498.  
  499. <6>[    1.080718] mipi_JDI_lcd_probe, lcd_pwm_type=1
  500.  
  501. <6>[    1.081573] mipi_JDI_lcd_probe+
  502.  
  503. <6>[    1.081787] mipi_JDI_lcd_probe, hw_revision=0
  504.  
  505. <6>[    1.082031] mipi_JDI_lcd_probe, lcd_pwm_type=1
  506.  
  507. <6>[    1.082397] setting pdata->panel_info.fb_num to 3. type: 9
  508.  
  509. <6>[    1.096038] FrameBuffer[0] 1200x1920 size=28016640 bytes is registered successfully!
  510.  
  511. <7>[    1.096679] Registered led device: lcd-backlight
  512.  
  513. <6>[    1.096771] mipi_JDI_lcd_probe-
  514.  
  515. <6>[    1.096893] mipi_JDI_1080P_pt_init-
  516.  
  517. <6>[    1.098114] setting pdata->panel_info.fb_num to 1. type: 7
  518.  
  519. <6>[    1.101074] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
  520.  
  521. <6>[    1.101654] mdp4_dtv_vsync_init: ndx=0
  522.  
  523. <3>[    1.101898] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group ede1fc08
  524.  
  525. <7>[    1.102111] EXT_COMMON: external_common_state_create: kobject_uevent(KOBJ_ADD)
  526.  
  527. <6>[    1.102142] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  528.  
  529. <6>[    1.103515]
  530.  
  531. <6>[    1.103546]  msm_vidc_enc: Inside vid_enc_init()
  532.  
  533. <6>[    1.104003]
  534.  
  535. <6>[    1.104003]  msm_vidc_enc: Inside vid_enc_vcd_init()
  536.  
  537. <6>[    1.105590] msm_serial_hs module loaded
  538.  
  539. <6>[    1.106079] msm_serial_hsl: detected port #1
  540.  
  541. <6>[    1.106353] msm_serial_hsl.1: ttyHSL1 at MMIO 0x12450000 (irq = 225) is a MSM
  542.  
  543. <6>[    1.106750] msm_serial_hsl: detected port #0
  544.  
  545. <6>[    1.106964] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16640000 (irq = 190) is a MSM
  546.  
  547. <6>[    1.107452] msm_serial_hsl: driver initialized
  548.  
  549. <6>[    1.109039] msm_rotator_probe: rotator_hw_revision=2
  550.  
  551. <6>[    1.112426] diagchar initialized now
  552.  
  553. <6>[    1.118103] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
  554.  
  555. <6>[    1.138000] brd: module loaded
  556.  
  557. <6>[    1.145782] loop: module loaded
  558.  
  559. <6>[    1.148193] tabla-slim tabla-slim: Platform data from board file
  560.  
  561. <3>[    1.308227] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
  562.  
  563. <6>[    1.311279] tabla2x-slim tabla2x-slim: Platform data from board file
  564.  
  565. <6>[    1.374572] wcd9xxx_check_codec_type: codec is tabla_codec
  566.  
  567. <6>[    1.374786] wcd9xxx_check_codec_type: Read codec idbytes & version
  568.  
  569. <6>[    1.374816] byte_0[00000002] byte_1[00000000] byte_2[00000000]
  570.  
  571. <6>[    1.374816]  byte_3[00000001] version = 2
  572.  
  573. <4>[    1.376892] i2c-core: driver [tabla-i2c-core] using legacy suspend method
  574.  
  575. <4>[    1.377014] i2c-core: driver [tabla-i2c-core] using legacy resume method
  576.  
  577. <6>[    1.378326] SCSI Media Changer driver v0.25
  578.  
  579. <6>[    1.378936] spi_qsd spi_qsd.0: master is unqueued, this is deprecated
  580.  
  581. <6>[    1.380523] tun: Universal TUN/TAP device driver, 1.6
  582.  
  583. <6>[    1.380645] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  584.  
  585. <6>[    1.380950] PPP generic driver version 2.4.2
  586.  
  587. <6>[    1.381164] PPP BSD Compression module registered
  588.  
  589. <6>[    1.381347] PPP Deflate Compression module registered
  590.  
  591. <6>[    1.383117] PPP MPPE Compression module registered
  592.  
  593. <6>[    1.383514] NET: Registered protocol family 24
  594.  
  595. <6>[    1.383789] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  596.  
  597. <6>[    1.384185] CSLIP: code copyright 1989 Regents of the University of California.
  598.  
  599. <6>[    1.384735] wcnss_wlan probed in built-in mode
  600.  
  601. <6>[    1.386383] usbcore: registered new interface driver asix
  602.  
  603. <6>[    1.386749] usbcore: registered new interface driver cdc_ether
  604.  
  605. <6>[    1.387329] usbcore: registered new interface driver net1080
  606.  
  607. <6>[    1.387664] usbcore: registered new interface driver cdc_subset
  608.  
  609. <6>[    1.388183] usbcore: registered new interface driver zaurus
  610.  
  611. <6>[    1.388732] usbcore: registered new interface driver sierra_net
  612.  
  613. <6>[    1.389221] usbcore: registered new interface driver cdc_ncm
  614.  
  615. <4>[    1.390289] smb345_probe+
  616.  
  617. <5>[    1.393951] smb345_charger: [smb345_inok_irq] GPIO pin irq 311 requested ok, smb345_INOK = L
  618.  
  619. <5>[    1.394165] smb345_charger: [smb345_wireless_irq] GPIO pin irq 322 requested ok, wpc_pok = H
  620.  
  621. <5>[    1.394378] smb345_charger: [smb345_wireless_en_config] GPIO pin 179, 183 requested ok, wpc_en1 = L, wpc_en2 = L
  622.  
  623. <4>[    1.394592] smb345_probe-
  624.  
  625. <4>[    1.394714] i2c-core: driver [smb345] using legacy suspend method
  626.  
  627. <4>[    1.394927] i2c-core: driver [smb345] using legacy resume method
  628.  
  629. <5>[    1.395080] bq27541_probe + client->addr= 55
  630.  
  631. <5>[    1.396301] bq27541_get_psp status: Not charging ret= 0x0280
  632.  
  633. <5>[    1.397399] bq27541_get_psp voltage_now= 4295000 uV
  634.  
  635. <5>[    1.398468] bq27541_get_capacity = 100% ret= 100
  636.  
  637. <5>[    1.399444] bq27541_get_psp temperature= 288 (0.1¢XC)
  638.  
  639. <5>[    1.400512] bq27541_get_psp current_now = 0 mA
  640.  
  641. <5>[    1.401489] bq27541_get_psp charge_now (compensated) = 3811000 uAh
  642.  
  643. <5>[    1.402496] bq27541_get_psp charge_avg (uncompensated) = 3865000 uAh
  644.  
  645. <5>[    1.403533] bq27541_get_psp charge_full = 3811000 uAh
  646.  
  647. <5>[    1.404510] bq27541_get_psp charge_design = 3828000 uAh
  648.  
  649. <5>[    1.405578] bq27541_get_psp energy_now = 14629000 uWh
  650.  
  651. <5>[    1.406555] bq27541_get_psp charge_counter = 0 uWh
  652.  
  653. <5>[    1.407653] bq27541_get_psp power_now = 0 uW
  654.  
  655. <5>[    1.408630] bq27541_get_psp cycle count = 88
  656.  
  657. <5>[    1.409820] bq27541_get_psp status: Not charging ret= 0x0280
  658.  
  659. <5>[    1.410827] bq27541_get_psp status: Not charging ret= 0x0280
  660.  
  661. <5>[    1.411865] setup_low_battery_irq irq=317, LL_BAT_T30=1
  662.  
  663. <5>[    1.411926] bq27541_get_psp voltage_now= 4295000 uV
  664.  
  665. <5>[    1.412322] bq27541_probe - bq27541-battery driver registered
  666.  
  667. <4>[    1.412780] i2c-core: driver [bq27541-battery] using legacy suspend method
  668.  
  669. <5>[    1.412811] bq27541_get_capacity = 100% ret= 100
  670.  
  671. <4>[    1.413360] i2c-core: driver [bq27541-battery] using legacy resume method
  672.  
  673. <5>[    1.413696] bq27541_get_psp temperature= 288 (0.1¢XC)
  674.  
  675. <6>[    1.414123] msm_otg msm_otg: msm_otg probe
  676.  
  677. <3>[    1.414398] msm_otg msm_otg: failed to get phy_clk
  678.  
  679. <5>[    1.414581] bq27541_get_psp current_now = 0 mA
  680.  
  681. <6>[    1.415069] msm_otg msm_otg: OTG regs = f0308000
  682.  
  683. <7>[    1.415435] msm_otg msm_otg: platform_get_irq for async_int failed
  684.  
  685. <5>[    1.415466] bq27541_get_psp charge_now (compensated) = 3811000 uAh
  686.  
  687. <5>[    1.416351] bq27541_get_psp charge_avg (uncompensated) = 3865000 uAh
  688.  
  689. <7>[    1.417022] msm_hsusb_config_vddcx: min_vol:1045000 max_vol:1320000
  690.  
  691. <5>[    1.417419] bq27541_get_psp charge_full = 3811000 uAh
  692.  
  693. <5>[    1.418395] bq27541_get_psp charge_design = 3828000 uAh
  694.  
  695. <7>[    1.419250] reg (HPM)
  696.  
  697. <5>[    1.419891] bq27541_get_psp energy_now = 14629000 uWh
  698.  
  699. <7>[    1.420043] msm_otg msm_otg: MHL can not be supported without PMIC Id
  700.  
  701. <7>[    1.420227] msm_otg msm_otg: MHL can not be supported
  702.  
  703. <3>[    1.420257] msm_otg msm_otg: PMIC IRQ for ID notifications doesn't exist
  704.  
  705. <5>[    1.420623] bq27541_get_psp charge_counter = 0 uWh
  706.  
  707. <7>[    1.420959] gpio_request: gpio-23 (msm_otg_ap_acok) status -16
  708.  
  709. <4>[    1.420959] gpio 23 request failed
  710.  
  711. <4>[    1.421081] msm_otg_acok_init: GPIO pin irq 311 requested ok, msm_otg_ACOK = L
  712.  
  713. <5>[    1.421325] bq27541_get_psp power_now = 0 uW
  714.  
  715. <4>[    1.421783] msm_otg_id_pin_init: GPIO pin irq 365 requested ok, msm_otg_id_pin = H
  716.  
  717. <5>[    1.422027] bq27541_get_psp cycle count = 88
  718.  
  719. <7>[    1.422241] c045c7cc
  720.  
  721. <7>[    1.422332] msm_otg msm_otg: OTG runtime idle
  722.  
  723. <6>[    1.422546] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  724.  
  725. <7>[    1.422851] msm_otg msm_otg: host driver registered w/ tranceiver
  726.  
  727. <6>[    1.423858] usbcore: registered new interface driver cdc_acm
  728.  
  729. <6>[    1.424041] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  730.  
  731. <6>[    1.424224] usbcore: registered new interface driver cdc_wdm
  732.  
  733. <6>[    1.424407] Initializing USB Mass Storage driver...
  734.  
  735. <6>[    1.424621] usbcore: registered new interface driver usb-storage
  736.  
  737. <6>[    1.424804] USB Mass Storage support registered.
  738.  
  739. <6>[    1.424987] usbcore: registered new interface driver ums-alauda
  740.  
  741. <6>[    1.425231] usbcore: registered new interface driver ums-cypress
  742.  
  743. <6>[    1.425415] usbcore: registered new interface driver ums-datafab
  744.  
  745. <6>[    1.425689] usbcore: registered new interface driver ums-freecom
  746.  
  747. <6>[    1.425872] usbcore: registered new interface driver ums-isd200
  748.  
  749. <6>[    1.426116] usbcore: registered new interface driver ums-jumpshot
  750.  
  751. <6>[    1.426300] usbcore: registered new interface driver ums-karma
  752.  
  753. <6>[    1.426544] usbcore: registered new interface driver ums-onetouch
  754.  
  755. <6>[    1.426727] usbcore: registered new interface driver ums-sddr09
  756.  
  757. <6>[    1.427001] usbcore: registered new interface driver ums-sddr55
  758.  
  759. <6>[    1.427154] usbcore: registered new interface driver ums-usbat
  760.  
  761. <6>[    1.427520] usbcore: registered new interface driver usbserial
  762.  
  763. <6>[    1.427642] usbserial: USB Serial Driver core
  764.  
  765. <6>[    1.427917] usbcore: registered new interface driver option
  766.  
  767. <6>[    1.428070] USB Serial support registered for GSM modem (1-port)
  768.  
  769. <6>[    1.428314] usbcore: registered new interface driver sierra
  770.  
  771. <6>[    1.428466] USB Serial support registered for Sierra USB modem
  772.  
  773. <6>[    1.428741] usbcore: registered new interface driver qc_csvt
  774.  
  775. <6>[    1.428894] USB Serial support registered for qc_csvt
  776.  
  777. <6>[    1.429168] usbcore: registered new interface driver usb_ehset_test
  778.  
  779. <6>[    1.429351] usbcore: registered new interface driver diag_bridge
  780.  
  781. <6>[    1.429901] usbcore: registered new interface driver mdm_bridge
  782.  
  783. <6>[    1.431213] usbcore: registered new interface driver ks_bridge
  784.  
  785. <6>[    1.431610] ksb_init: init done
  786.  
  787. <7>[    1.432159] msm_otg msm_otg: peripheral driver registered w/ tranceiver
  788.  
  789. <7>[    1.432220] UNDEFINED work
  790.  
  791. <6>[    1.432281] msm_otg msm_otg: phy_reset: success
  792.  
  793. <6>[    1.433776] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
  794.  
  795. <6>[    1.434326] mbim_init: initialize 1 instances
  796.  
  797. <6>[    1.434722] mbim_init: Initialized 1 ports
  798.  
  799. <6>[    1.438385] rndis_qc_init: initialize rndis QC instance
  800.  
  801. <6>[    1.439208] android_usb gadget: Mass Storage Function, version: 2009/09/11
  802.  
  803. <6>[    1.439605] android_usb gadget: Number of LUNs=1
  804.  
  805. <6>[    1.439849]  lun0: LUN: removable file: (no medium)
  806.  
  807. <6>[    1.440979] android_usb gadget: android_usb ready
  808.  
  809. <6>[    1.442321] mousedev: PS/2 mouse device common for all mice
  810.  
  811. <6>[    1.443969] usbcore: registered new interface driver xpad
  812.  
  813. <4>[    1.444213] [ektf3k]:[elan] elan_ktf3k_ts_init
  814.  
  815. <4>[    1.444824] [ektf3k]:[ELAN] Start HW reset!
  816.  
  817. <4>[    1.537506] [usb_otg] switch to peripheral mode by default (boot)
  818.  
  819.  
  820. <4>[    1.697479] [ektf3k]:[elan]detect intr=>Old FW
  821.  
  822. <4>[    1.697875] [ektf3k]:The boot code is old!
  823.  
  824. <4>[    1.727752] [ektf3k]:[elan] __hello_packet_handler: hello packet 55:55:55:55
  825.  
  826. <4>[    1.727966] [ektf3k]:[elan] hello packet's rc = 0
  827.  
  828. <6>[    1.937805] notifying plugin
  829.  
  830. <7>[    1.937835] id_pin_irq_work_function: gpio_get_value(APQ_OTG_ID_PIN) = 1
  831.  
  832. <7>[    1.937927] PMIC: BSV set
  833.  
  834. <7>[    1.937927] PMIC: BSV init complete
  835.  
  836. <7>[    1.937957] b_sess_vld
  837.  
  838. <7>[    1.937988] msm_otg msm_otg: chg detection work
  839.  
  840. <4>[    1.939788] [ektf3k]:[elan] __fw_packet_handler: firmware version: 0xa044
  841.  
  842. <4>[    1.941925] [ektf3k]:[elan] __fw_packet_handler: X resolution: 0x007e
  843.  
  844. <4>[    1.944061] [ektf3k]:[elan] __fw_packet_handler: Y resolution: 0x00d2
  845.  
  846. <4>[    1.946105] [ektf3k]:[elan] __fw_packet_handler: firmware id: 0x3029
  847.  
  848. <4>[    1.948242] [ektf3k]:[elan] __fw_packet_handler: boot code id: 0x6047
  849.  
  850. <4>[    1.948364] [ektf3k]:[Elan] Max X=2239, Max Y=1343
  851.  
  852. <6>[    1.948760] input: elan-touchscreen as /devices/virtual/input/input0
  853.  
  854. <6>[    1.949279] input: wake_gesture as /devices/virtual/input/input1
  855.  
  856. <4>[    1.949554] [ektf3k]:The firmware was version 0xA044 and id:0x3029
  857.  
  858. <4>[    1.949768] [ektf3k]: /proc/ektf_dbg created
  859.  
  860. <4>[    1.950256] [ektf3k]:[elan] Start touchscreen elan-touchscreen in interrupt mode
  861.  
  862. <4>[    1.950439] [ektf3k]:[ELAN]misc_register finished!!
  863.  
  864. <6>[    1.950622] elan-ktf3k 3-0010: Update power source to 0
  865.  
  866. <6>[    1.951080] wake_timeout version 2.0
  867.  
  868. <6>[    1.951507] lis3dh_acc accelerometer driver: init
  869.  
  870. <4>[    1.951660] i2c-core: driver [lis3dh_acc] using legacy suspend method
  871.  
  872. <4>[    1.951873] i2c-core: driver [lis3dh_acc] using legacy resume method
  873.  
  874. <6>[    1.952209] ASUSTek: lid_driver_probe
  875.  
  876. <6>[    1.952484] input: lid_input as /devices/virtual/input/input2
  877.  
  878. <6>[    1.954010] using rtc device, pm8xxx_rtc, for alarms
  879.  
  880. <6>[    1.954162] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  881.  
  882. <6>[    1.954803] i2c /dev entries driver
  883.  
  884. <3>[    1.958374] ov5693_init_module:105
  885.  
  886. <3>[    1.958862] ov5693_init_module:110 rc -19
  887.  
  888. <7>[    1.987487] msm_otg msm_otg: chg detection work
  889.  
  890. <3>[    1.993438] gpio 25 VCM_PD(1)
  891.  
  892. <3>[    1.993591] gpio 31 XSHUTDN(1)
  893.  
  894. <7>[    2.037445] msm_otg msm_otg: chg detection work
  895.  
  896. <6>[    2.052307] mi1040_init_module:323
  897.  
  898. <3>[    2.052734] mi1040_init_module:329 rc -19
  899.  
  900. <7>[    2.067565] msm_otg msm_otg: chg detection work
  901.  
  902. <6>[    2.067718] msm_otg msm_otg: chg_type = USB_SDP_CHARGER
  903.  
  904. <5>[    2.068115] smb345_charger: [usb_cable_type_detect] INOK=L
  905.  
  906. <5>[    2.068328] smb345_charger: [usb_cable_type_detect] Cable: SDP
  907.  
  908. <5>[    2.069244] smb345_charger: [smb345_vflt_setting] Bypass set Float Volt=e8
  909.  
  910. <4>[    2.069793] ========================================================
  911.  
  912. <4>[    2.070190] bq27541_battery_callback  usb_cable_state = 1
  913.  
  914. <4>[    2.070404] ========================================================
  915.  
  916. <6>[    2.070800] battery_callback cable_wake_lock 5 sec...
  917.  
  918. <6>[    2.070800]  
  919.  
  920. <6>[    2.071228] elan-ktf3k 3-0010: Update power source to 1
  921.  
  922. <6>[    2.072052] The USB cable status = CHARGER_SDP
  923.  
  924. <7>[    2.072296] b_idle work
  925.  
  926. <7>[    2.072296] b_sess_vld
  927.  
  928. <7>[    2.072326] msm_otg msm_otg: gadget on
  929.  
  930. <6>[    2.076019] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
  931.  
  932. <3>[    2.227478] gpio 43 CAM_RST(1)
  933.  
  934. <6>[    2.287414] mi1040_sensor_match_id +++
  935.  
  936. <6>[    2.288177] Sensor id: 0x2481
  937.  
  938. <6>[    2.288391] PMIC gpio 11 CAM_VENDOR_1(0)
  939.  
  940. <6>[    2.288513] PMIC gpio 10 CAM_VENDOR_0(0)
  941.  
  942. <6>[    2.288635] PMIC gpio 24 CAM_LENS(0)
  943.  
  944. <6>[    2.288818] Vendor is B
  945.  
  946. <6>[    2.288940] mi1040_sensor_match_id ---
  947.  
  948. <6>[    2.529235] lirc_dev: IR Remote Control driver registered, major 236
  949.  
  950. <6>[    2.529449] IR NEC protocol handler initialized
  951.  
  952. <6>[    2.529541] IR RC5(x) protocol handler initialized
  953.  
  954. <6>[    2.529754] IR RC6 protocol handler initialized
  955.  
  956. <6>[    2.529846] IR JVC protocol handler initialized
  957.  
  958. <6>[    2.529968] IR Sony protocol handler initialized
  959.  
  960. <6>[    2.530151] IR RC5 (streamzap) protocol handler initialized
  961.  
  962. <6>[    2.530273] IR SANYO protocol handler initialized
  963.  
  964. <6>[    2.530456] IR MCE Keyboard/mouse protocol handler initialized
  965.  
  966. <6>[    2.530548] IR LIRC bridge handler initialized
  967.  
  968. <6>[    2.531311] gspca_main: v2.14.0 registered
  969.  
  970. <6>[    2.531799] usbcore: registered new interface driver uvcvideo
  971.  
  972. <6>[    2.531982] USB Video Class driver (1.1.1)
  973.  
  974. <3>[    2.533660] pm8xxx_adc_probe: failed to request pa_therm vreg with error -517
  975.  
  976. <6>[    2.534729] CAP1106: [cap1106_init]
  977.  
  978. <4>[    2.534881] i2c-core: driver [cap1106] using legacy suspend method
  979.  
  980. <4>[    2.535003] i2c-core: driver [cap1106] using legacy resume method
  981.  
  982. <6>[    2.558319] pm8xxx_tm_probe: OK
  983.  
  984. <6>[    2.559326] pm8xxx_tm_probe: OK
  985.  
  986. <6>[    2.561096] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  987.  
  988. <6>[    2.563049] cpuidle: using governor ladder
  989.  
  990. <6>[    2.563415] cpuidle: using governor menu
  991.  
  992. <6>[    2.564270] mmc0: SDCC Version: 0x06000018
  993.  
  994. <6>[    2.566162] mmc0: bam physical base=0x12402000
  995.  
  996. <6>[    2.566375] mmc0: bam virtual base=0xf0334000
  997.  
  998. <6>[    2.566467] sps:BAM 0x12402000 is registered.
  999.  
  1000. <6>[    2.566589] mmc0: BAM device registered. bam_handle=0xc22f8800
  1001.  
  1002. <6>[    2.568695] sps:BAM 0x12402000 enabled: ver:0x5, number of pipes:6
  1003.  
  1004. <6>[    2.570434] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
  1005.  
  1006. <6>[    2.570648] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
  1007.  
  1008. <3>[    2.570892] mmc0: No card detect facilities available
  1009.  
  1010. <6>[    2.572753] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
  1011.  
  1012. <6>[    2.572967] mmc0: Controller capabilities: 0x0000039a
  1013.  
  1014. <6>[    2.573059] mmc0: 8 bit data mode enabled
  1015.  
  1016. <6>[    2.573242] mmc0: 4 bit data mode disabled
  1017.  
  1018. <6>[    2.573364] mmc0: polling status mode disabled
  1019.  
  1020. <6>[    2.573455] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
  1021.  
  1022. <6>[    2.573669] mmc0: Slot eject status = 0
  1023.  
  1024. <6>[    2.573791] mmc0: Power save feature enable = 1
  1025.  
  1026. <6>[    2.573974] mmc0: SPS-BAM data transfer mode available
  1027.  
  1028. <6>[    2.578094] usbcore: registered new interface driver usbhid
  1029.  
  1030. <6>[    2.578216] usbhid: USB HID core driver
  1031.  
  1032. <6>[    2.579071] ashmem: initialized
  1033.  
  1034. <6>[    2.579803] usbcore: registered new interface driver snd-usb-audio
  1035.  
  1036. <3>[    2.581451] tabla_probe
  1037.  
  1038. <6>[    2.583282] msm_pcm_probe: dev name msm-voip-dsp
  1039.  
  1040. <6>[    2.583709] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
  1041.  
  1042. <6>[    2.583923] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
  1043.  
  1044. <6>[    2.585205] msm_pcm_probe: dev name msm-pcm-dsp
  1045.  
  1046. <6>[    2.585754] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
  1047.  
  1048. <6>[    2.586181] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
  1049.  
  1050. <6>[    2.586364] adding pm_qos request in low latency driver
  1051.  
  1052. <6>[    2.586486] done adding pm_qos request in low latency driver
  1053.  
  1054. <6>[    2.587707] msm_compr_probe: dev name msm-compr-dsp
  1055.  
  1056. <6>[    2.588439] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
  1057.  
  1058. <3>[    2.589630] msm8930_audio_init: Not the right machine type
  1059.  
  1060. <3>[    2.589721] msm_audio_init: Not the right machine type
  1061.  
  1062. <6>[    2.589843] msm_audio_init: Not APQ8064 in I2S mode
  1063.  
  1064. <6>[    2.591156] tabla codec probe...
  1065.  
  1066. <6>[    2.706359] mmc0: new HS200 MMC card at address 0001
  1067.  
  1068. <6>[    2.708007] mmcblk0: mmc0:0001 016GE2 14.6 GiB
  1069.  
  1070. <6>[    2.714904]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30
  1071.  
  1072. <6>[    2.721923] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
  1073.  
  1074. <6>[    2.722808] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
  1075.  
  1076. <6>[    2.723541] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
  1077.  
  1078. <6>[    2.724456] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
  1079.  
  1080. <6>[    2.725250] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
  1081.  
  1082. <6>[    2.726196] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
  1083.  
  1084. <6>[    2.726959] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
  1085.  
  1086. <6>[    2.727722] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
  1087.  
  1088. <6>[    2.728485] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
  1089.  
  1090. <6>[    2.729400] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
  1091.  
  1092. <6>[    2.730163] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
  1093.  
  1094. <6>[    2.730987] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
  1095.  
  1096. <6>[    2.731689] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
  1097.  
  1098. <6>[    2.732513] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
  1099.  
  1100. <6>[    2.733276] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
  1101.  
  1102. <6>[    2.734710] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
  1103.  
  1104. <6>[    2.739654] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
  1105.  
  1106. <6>[    2.740417] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
  1107.  
  1108. <6>[    2.741058] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
  1109.  
  1110. <6>[    2.741851] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
  1111.  
  1112. <6>[    2.742401] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
  1113.  
  1114. <6>[    2.743103] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
  1115.  
  1116. <6>[    2.743835] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
  1117.  
  1118. <6>[    2.744567] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
  1119.  
  1120. <6>[    2.745208] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
  1121.  
  1122. <6>[    2.745941] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
  1123.  
  1124. <6>[    2.746551] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
  1125.  
  1126. <6>[    2.747314] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
  1127.  
  1128. <6>[    2.747985] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
  1129.  
  1130. <6>[    2.748779] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
  1131.  
  1132. <6>[    2.749450] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
  1133.  
  1134. <6>[    2.750305] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
  1135.  
  1136. <6>[    2.750946] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
  1137.  
  1138. <6>[    2.751678] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
  1139.  
  1140. <6>[    2.752349] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
  1141.  
  1142. <6>[    2.753051] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
  1143.  
  1144. <6>[    2.753723] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
  1145.  
  1146. <6>[    2.756469] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
  1147.  
  1148. <6>[    2.756958] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
  1149.  
  1150. <6>[    2.760559] headset_init+ #####
  1151.  
  1152. <6>[    2.761688] input: h2w button as /devices/virtual/input/input5
  1153.  
  1154. <6>[    2.762298] HEADSET: Headset detection mode
  1155.  
  1156. <6>[    2.817749] set_hs_micbias badgap status: OFF power down bandgap
  1157.  
  1158. <6>[    2.818054] headset_init- #####
  1159.  
  1160. <6>[    2.818481] u32 classifier
  1161.  
  1162. <6>[    2.818847]     Actions configured
  1163.  
  1164. <6>[    2.819458] TCP: bic registered
  1165.  
  1166. <6>[    2.819671] TCP: cubic registered
  1167.  
  1168. <6>[    2.819885] TCP: westwood registered
  1169.  
  1170. <6>[    2.820281] TCP: highspeed registered
  1171.  
  1172. <6>[    2.820495] TCP: hybla registered
  1173.  
  1174. <6>[    2.820709] TCP: htcp registered
  1175.  
  1176. <6>[    2.821075] TCP: vegas registered
  1177.  
  1178. <6>[    2.821319] TCP: veno registered
  1179.  
  1180. <6>[    2.821533] TCP: scalable registered
  1181.  
  1182. <6>[    2.821899] TCP: lp registered
  1183.  
  1184. <6>[    2.822113] TCP: yeah registered
  1185.  
  1186. <6>[    2.822357] TCP: illinois registered
  1187.  
  1188. <6>[    2.822570] Initializing XFRM netlink socket
  1189.  
  1190. <6>[    2.822967] NET: Registered protocol family 17
  1191.  
  1192. <6>[    2.823242] NET: Registered protocol family 15
  1193.  
  1194. <6>[    2.823730] L2TP core driver, V2.0
  1195.  
  1196. <6>[    2.823974] PPPoL2TP kernel driver, V2.0
  1197.  
  1198. <5>[    2.824188] Registering the dns_resolver key type
  1199.  
  1200. <6>[    2.826232] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0
  1201.  
  1202. <5>[    2.826721] Registering SWP/SWPB emulation handler
  1203.  
  1204. <6>[    2.827301] clock_late_init: Removing enables held for handed-off clocks
  1205.  
  1206. <6>[    2.833343] MSM Watchdog Initialized
  1207.  
  1208. <6>[    2.853668] msm-sleeper version 1.2
  1209.  
  1210. <7>[    2.856109] gpio_set_debounce: gpio-26 status -22
  1211.  
  1212. <7>[    2.856323] gpio_set_debounce: gpio-155 status -22
  1213.  
  1214. <7>[    2.856506] gpio_set_debounce: gpio-189 status -22
  1215.  
  1216. <6>[    2.857116] input: gpio-keys as /devices/platform/gpio-keys.0/input/input6
  1217.  
  1218. <6>[    2.857818] [sweep2wake]: set device gpio-keys
  1219.  
  1220. <6>[    2.858398] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2019-07-11 21:23:17 UTC (1562880197)
  1221.  
  1222. <3>[    2.859466] MSM_DCVS: msm_dcvs_register_core: msm_dcvs_register_core: scm register core fail handle = 1 ret = -22
  1223.  
  1224. <3>[    2.859893] Unable to register core for 0
  1225.  
  1226. <4>[    2.860137] msm_dcvs_gov: probe of msm_dcvs_gov failed with error -22
  1227.  
  1228. <6>[    2.860900] ALSA device list:
  1229.  
  1230. <6>[    2.861114]   #0: apq8064-tabla-snd-card
  1231.  
  1232. <6>[    2.864288] Freeing init memory: 1036K
  1233.  
  1234. <5>[    2.869323] init: init started!
  1235.  
  1236. <7>[    2.880523] SELinux: 2048 avtab hash slots, 5604 rules.
  1237.  
  1238. <7>[    2.887145] SELinux: 2048 avtab hash slots, 5604 rules.
  1239.  
  1240. <7>[    2.887207] SELinux:  1 users, 2 roles, 598 types, 0 bools, 1 sens, 1024 cats
  1241.  
  1242. <7>[    2.887237] SELinux:  87 classes, 5604 rules
  1243.  
  1244. <7>[    2.890716] SELinux:  Completing initialization.
  1245.  
  1246. <7>[    2.890716] SELinux:  Setting up existing superblocks.
  1247.  
  1248. <7>[    2.890777] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  1249.  
  1250. <7>[    2.890838] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  1251.  
  1252. <7>[    2.892364] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  1253.  
  1254. <7>[    2.892425] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  1255.  
  1256. <7>[    2.892486] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  1257.  
  1258. <7>[    2.892547] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  1259.  
  1260. <7>[    2.907348] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  1261.  
  1262. <7>[    2.907379] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  1263.  
  1264. <7>[    2.907409] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  1265.  
  1266. <7>[    2.907531] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  1267.  
  1268. <7>[    2.907592] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  1269.  
  1270. <7>[    2.907714] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  1271.  
  1272. <7>[    2.907775] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  1273.  
  1274. <5>[    2.927978] type=1403 audit(1562880197.560:2): policy loaded auid=4294967295 ses=4294967295
  1275.  
  1276. <5>[    2.928802] init: (Initializing SELinux enforcing took 0.06s.)
  1277.  
  1278. <5>[    2.940521] type=1400 audit(1562880197.570:3): avc:  denied  { module_request } for  pid=1 comm="init" kmod="personality-8" scontext=u:r:init:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
  1279.  
  1280. <5>[    2.944763] init: init second stage started!
  1281.  
  1282. <3>[    3.605499] init: waitpid failed: No child processes
  1283.  
  1284. <5>[    3.606964] init: (Loading properties from /default.prop took 0.00s.)
  1285.  
  1286. <3>[    3.607696] init: /init.rc: 63: invalid command 'load_all_props'
  1287.  
  1288. <3>[    3.607879] init: could not import file '/init.recovery.logd.rc' from '/init.rc'
  1289.  
  1290. <3>[    3.608062] init: could not import file '/init.recovery.mksh.rc' from '/init.rc'
  1291.  
  1292. <5>[    3.608276] init: (Parsing /init.recovery.usb.rc took 0.00s.)
  1293.  
  1294. <5>[    3.608428] init: (Parsing /init.recovery.service.rc took 0.00s.)
  1295.  
  1296. <3>[    3.608581] init: could not import file '/init.recovery.vold_decrypt.rc' from '/init.rc'
  1297.  
  1298. <3>[    3.608734] init: could not import file '/init.recovery.flo.rc' from '/init.rc'
  1299.  
  1300. <5>[    3.608825] init: (Parsing /init.rc took 0.00s.)
  1301.  
  1302. <5>[    3.609039] type=1400 audit(1562880198.240:4): avc:  denied  { setcheckreqprot } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
  1303.  
  1304. <5>[    3.609283] type=1400 audit(1562880198.240:5): avc:  denied  { setcurrent } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
  1305.  
  1306. <5>[    3.609436] type=1400 audit(1562880198.240:6): avc:  denied  { dyntransition } for  pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=process permissive=1
  1307.  
  1308. <3>[    3.609680] init: SELinux: Could not get canonical path /postinstall restorecon: No such file or directory.
  1309.  
  1310. <5>[    3.609863] init: Starting service 'ueventd'...
  1311.  
  1312. <5>[    3.610229] init: Waiting for /dev/.coldboot_done...
  1313.  
  1314. <5>[    3.611297] type=1400 audit(1562880198.240:7): avc:  denied  { module_request } for  pid=167 comm="ueventd" kmod="personality-8" scontext=u:r:ueventd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
  1315.  
  1316. <5>[    3.613586] ueventd: ueventd started!
  1317.  
  1318. <5>[    3.661163] bq27541_get_psp status: Full ret= 0x0281
  1319.  
  1320. <5>[    3.661926] bq27541_get_psp voltage_now= 4292000 uV
  1321.  
  1322. <5>[    3.662567] bq27541_get_capacity = 100% ret= 100
  1323.  
  1324. <5>[    3.663330] bq27541_get_psp temperature= 288 (0.1¢XC)
  1325.  
  1326. <5>[    3.664001] bq27541_get_psp current_now = -56 mA
  1327.  
  1328. <5>[    3.664672] bq27541_get_psp charge_now (compensated) = 3817000 uAh
  1329.  
  1330. <5>[    3.665344] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh
  1331.  
  1332. <5>[    3.666076] bq27541_get_psp charge_full = 3817000 uAh
  1333.  
  1334. <5>[    3.666748] bq27541_get_psp charge_design = 3828000 uAh
  1335.  
  1336. <5>[    3.667480] bq27541_get_psp energy_now = 14658000 uWh
  1337.  
  1338. <5>[    3.668151] bq27541_get_psp charge_counter = 0 uWh
  1339.  
  1340. <5>[    3.668823] bq27541_get_psp power_now = -240000 uW
  1341.  
  1342. <5>[    3.669555] bq27541_get_psp cycle count = 88
  1343.  
  1344. <5>[    4.078521] bq27541_get_psp status: Full ret= 0x0281
  1345.  
  1346. <5>[    4.079498] bq27541_get_psp status: Full ret= 0x0281
  1347.  
  1348. <5>[    4.080322] bq27541_get_psp voltage_now= 4292000 uV
  1349.  
  1350. <5>[    4.081115] bq27541_get_capacity = 100% ret= 100
  1351.  
  1352. <5>[    4.082061] bq27541_get_psp temperature= 288 (0.1¢XC)
  1353.  
  1354. <5>[    4.082855] bq27541_get_psp current_now = -56 mA
  1355.  
  1356. <5>[    4.083801] bq27541_get_psp charge_now (compensated) = 3817000 uAh
  1357.  
  1358. <5>[    4.084594] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh
  1359.  
  1360. <5>[    4.085540] bq27541_get_psp charge_full = 3817000 uAh
  1361.  
  1362. <5>[    4.086334] bq27541_get_psp charge_design = 3828000 uAh
  1363.  
  1364. <5>[    4.087280] bq27541_get_psp energy_now = 14658000 uWh
  1365.  
  1366. <5>[    4.088073] bq27541_get_psp charge_counter = 0 uWh
  1367.  
  1368. <5>[    4.089019] bq27541_get_psp power_now = -240000 uW
  1369.  
  1370. <5>[    4.089813] bq27541_get_psp cycle count = 88
  1371.  
  1372. <5>[    4.169708] smb345_charger: [smb345_config_thermal_limit] Set HRD SFT limit, retval=41 setting=73
  1373.  
  1374. <5>[    4.170562] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4292000
  1375.  
  1376. <5>[    4.171417] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV
  1377.  
  1378. <5>[    4.172149] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
  1379.  
  1380. <3>[    4.612915] init: Timed out waiting for /dev/.coldboot_done
  1381.  
  1382. <5>[    4.613372] init: Waiting for /dev/.coldboot_done took 1.00s.
  1383.  
  1384. <7>[    4.735443] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  1385.  
  1386. <3>[    4.737426] enable_store: android_usb: already disabled
  1387.  
  1388. <5>[    4.737762] init: write_file: Unable to open '/sys/class/android_usb/android0/f_ffs/aliases': No such file or directory
  1389.  
  1390. <5>[    4.738647] init: (Loading properties from /system/build.prop took 0.00s.)
  1391.  
  1392. <5>[    4.738769] init: (Loading properties from /vendor/build.prop took 0.00s.)
  1393.  
  1394. <5>[    4.738952] init: (Loading properties from /factory/factory.prop took 0.00s.)
  1395.  
  1396. <3>[    4.739440] init: error opening block device /dev/block/platform/msm_sdcc.1/by-name/recovery: No such file or directory
  1397.  
  1398. <5>[    4.739685] init: (Loading properties from /data/local.prop took 0.00s.)
  1399.  
  1400. <3>[    4.739807] init: Unable to open persistent property directory "/data/property": No such file or directory
  1401.  
  1402. <5>[    4.740875] init: Starting service 'set_permissive'...
  1403.  
  1404. <5>[    4.741394] init: Starting service 'recovery'...
  1405.  
  1406. <5>[    4.741973] init: Starting service 'adbd'...
  1407.  
  1408. <5>[    4.742706] type=1400 audit(1562880199.371:8): avc:  denied  { module_request } for  pid=173 comm="recovery" kmod="personality-8" scontext=u:r:recovery:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
  1409.  
  1410. <5>[    4.744049] type=1400 audit(1562880199.371:9): avc:  denied  { module_request } for  pid=174 comm="adbd" kmod="personality-8" scontext=u:r:adbd:s0 tcontext=u:r:kernel:s0 tclass=system permissive=1
  1411.  
  1412. <6>[    4.750610] adb_open
  1413.  
  1414. <6>[    4.750762] adb_bind_config
  1415.  
  1416. <5>[    4.779205] type=1400 audit(1562880199.411:10): avc:  denied  { write } for  pid=184 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
  1417.  
  1418. <5>[    4.781005] init: Service 'set_permissive' (pid 172) exited with status 0
  1419.  
  1420. <3>[    4.788452] init: avc:  denied  { set } for property=twrp.crash_counter scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
  1421.  
  1422. <4>[    4.811553] mipi_dsi_panel_power+, on=1
  1423.  
  1424. <3>[    4.853179] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  1425.  
  1426. <6>[    4.853271] android_work: android_work: did not send uevent (0 0   (null))
  1427.  
  1428. <7>[    4.855438] portsc = 88000a05
  1429.  
  1430. <4>[    4.888061] mipi_dsi_panel_power-
  1431.  
  1432. <6>[    4.894073] mipi_JDI_lcd_on+
  1433.  
  1434. <6>[    4.894073] mipi_JDI_lcd_on-, booting
  1435.  
  1436. <6>[    4.923004] mipi_JDI_set_recovery_backlight: 100/255
  1437.  
  1438. <6>[    4.940032] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1439.  
  1440. <6>[    4.964843] android_usb gadget: high-speed config #1: android_usb
  1441.  
  1442. <3>[    4.964874] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  1443.  
  1444. <6>[    4.964904] USB fast charging is OFF.
  1445.  
  1446. <6>[    4.964904] msm_otg msm_otg: Avail curr from USB = 500
  1447.  
  1448. <7>[    4.964935] msm_otg msm_otg: Power Supply doesn't support USB charger
  1449.  
  1450. <6>[    4.978454] mipi_JDI_lcd_off+
  1451.  
  1452. <6>[    4.978454] mipi_JDI_lcd_off-, set_recovery_bl_done, do nothing
  1453.  
  1454. <4>[    4.978515] mipi_dsi_panel_power+, on=0
  1455.  
  1456. <6>[    4.978515] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
  1457.  
  1458. <4>[    4.985229] mipi_dsi_panel_power+, on=1
  1459.  
  1460. <6>[    4.985260] mipi_dsi_panel_power-, set_recovery_bl_done, do nothing
  1461.  
  1462. <5>[    4.988647] ueventd: Coldboot took 1.36s.
  1463.  
  1464. <6>[    4.991546] mipi_JDI_lcd_on+
  1465.  
  1466. <6>[    4.991546] mipi_JDI_lcd_on-, set_recovery_bl_done, do nothing
  1467.  
  1468. <6>[    5.018127] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1469.  
  1470. <6>[    5.098175] mipi_JDI_set_backlight: pwm enable
  1471.  
  1472. <6>[    5.218078] msm_thermal: setting trip range 0..80 on sensor 7.
  1473.  
  1474. <6>[    5.229217] EXT4-fs (mmcblk0p30): recovery complete
  1475.  
  1476. <6>[    5.229919] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts:
  1477.  
  1478. <7>[    5.230072] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr
  1479.  
  1480. <6>[    5.329803] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts:
  1481.  
  1482. <7>[    5.330230] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr
  1483.  
  1484. <7>[    7.078308] msm_ta_detect_work: ta detection work
  1485.  
  1486. <6>[    7.078338] msm_ta_detect_work: USB exit ta detection - frindex
  1487.  
  1488. <6>[    7.107238] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts:
  1489.  
  1490. <7>[    7.107666] SELinux: initialized (dev mmcblk0p30, type ext4), uses xattr
  1491.  
  1492. <6>[    7.186553] EXT4-fs (mmcblk0p23): recovery complete
  1493.  
  1494. <6>[    7.187286] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts:
  1495.  
  1496. <7>[    7.187530] SELinux: initialized (dev mmcblk0p23, type ext4), uses xattr
  1497.  
  1498. <4>[    7.188293] audit_printk_skb: 15 callbacks suppressed
  1499.  
  1500. <5>[    7.188507] type=1400 audit(1562880201.823:16): avc:  denied  { create } for  pid=173 comm="recovery" name="fstab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1501.  
  1502. <5>[    7.188781] type=1400 audit(1562880201.823:17): avc:  denied  { write } for  pid=173 comm="recovery" name="fstab" dev="rootfs" ino=8421 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
  1503.  
  1504. <6>[    7.203674] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:
  1505.  
  1506. <7>[    7.203826] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
  1507.  
  1508. <6>[    7.220825] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:
  1509.  
  1510. <7>[    7.221282] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
  1511.  
  1512. <5>[    7.232543] type=1400 audit(1562880201.863:18): avc:  denied  { read } for  pid=173 comm="recovery" name="/" dev="mmcblk0p30" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
  1513.  
  1514. <5>[    7.233245] type=1400 audit(1562880201.863:19): avc:  denied  { open } for  pid=173 comm="recovery" name="/" dev="mmcblk0p30" ino=2 scontext=u:r:recovery:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
  1515.  
  1516. <5>[    7.235504] type=1400 audit(1562880201.863:20): avc:  denied  { getattr } for  pid=173 comm="recovery" path="/data/bootchart" dev="mmcblk0p30" ino=244321 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
  1517.  
  1518. <5>[    7.236236] type=1400 audit(1562880201.863:21): avc:  denied  { read } for  pid=173 comm="recovery" name="bootchart" dev="mmcblk0p30" ino=244321 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
  1519.  
  1520. <5>[    7.236755] type=1400 audit(1562880201.863:22): avc:  denied  { open } for  pid=173 comm="recovery" name="bootchart" dev="mmcblk0p30" ino=244321 scontext=u:r:recovery:s0 tcontext=u:object_r:bootchart_data_file:s0 tclass=dir permissive=1
  1521.  
  1522. <6>[    7.239593] SELinux:  Context u:object_r:recovery_data_file:s0 is not valid (left unmapped).
  1523.  
  1524. <5>[    7.241851] type=1400 audit(1562880201.873:23): avc:  denied  { getattr } for  pid=173 comm="recovery" path="/data/misc/bluedroid" dev="mmcblk0p30" ino=635237 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
  1525.  
  1526. <5>[    7.242584] type=1400 audit(1562880201.873:24): avc:  denied  { read } for  pid=173 comm="recovery" name="bluedroid" dev="mmcblk0p30" ino=635237 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
  1527.  
  1528. <5>[    7.243255] type=1400 audit(1562880201.873:25): avc:  denied  { open } for  pid=173 comm="recovery" name="bluedroid" dev="mmcblk0p30" ino=635237 scontext=u:r:recovery:s0 tcontext=u:object_r:bluetooth_data_file:s0 tclass=dir permissive=1
  1529.  
  1530. <6>[    7.244598] SELinux:  Context u:object_r:bluetooth_logs_data_file:s0 is not valid (left unmapped).
  1531.  
  1532. <6>[    7.249847] SELinux:  Context u:object_r:network_watchlist_data_file:s0 is not valid (left unmapped).
  1533.  
  1534. <6>[    7.250305] SELinux:  Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped).
  1535.  
  1536. <6>[    7.255645] SELinux:  Context u:object_r:audioserver_data_file:s0 is not valid (left unmapped).
  1537.  
  1538. <6>[    7.256958] SELinux:  Context u:object_r:boottrace_data_file:s0 is not valid (left unmapped).
  1539.  
  1540. <6>[    7.257568] SELinux:  Context u:object_r:update_engine_data_file:s0 is not valid (left unmapped).
  1541.  
  1542. <6>[    7.258178] SELinux:  Context u:object_r:update_engine_log_data_file:s0 is not valid (left unmapped).
  1543.  
  1544. <6>[    7.258666] SELinux:  Context u:object_r:method_trace_data_file:s0 is not valid (left unmapped).
  1545.  
  1546. <6>[    7.259216] SELinux:  Context u:object_r:wm_trace_data_file:s0 is not valid (left unmapped).
  1547.  
  1548. <6>[    7.260040] SELinux:  Context u:object_r:user_profile_data_file:s0 is not valid (left unmapped).
  1549.  
  1550. <6>[    7.260894] SELinux:  Context u:object_r:profman_dump_data_file:s0 is not valid (left unmapped).
  1551.  
  1552. <6>[    7.264709] SELinux:  Context u:object_r:trace_data_file:s0 is not valid (left unmapped).
  1553.  
  1554. <6>[    7.266021] SELinux:  Context u:object_r:vendor_data_file:s0 is not valid (left unmapped).
  1555.  
  1556. <6>[    7.268035] SELinux:  Context u:object_r:tombstone_wifi_data_file:s0 is not valid (left unmapped).
  1557.  
  1558. <6>[    7.268890] SELinux:  Context u:object_r:wpa_data_file:s0 is not valid (left unmapped).
  1559.  
  1560. <6>[    7.283752] SELinux:  Context u:object_r:ota_data_file:s0 is not valid (left unmapped).
  1561.  
  1562. <6>[    7.284973] SELinux:  Context u:object_r:ota_package_file:s0 is not valid (left unmapped).
  1563.  
  1564. <6>[    7.301574] SELinux:  Context u:object_r:cache_recovery_file:s0 is not valid (left unmapped).
  1565.  
  1566. <6>[    7.303070] SELinux:  Context u:object_r:cache_private_backup_file:s0 is not valid (left unmapped).
  1567.  
  1568. <5>[    7.663940] bq27541_get_capacity = 100% ret= 100
  1569.  
  1570. <5>[    7.665130] bq27541_get_psp status: Full ret= 0x0281
  1571.  
  1572. <3>[    8.909179] init: avc:  denied  { set } for property=sys.usb.config scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service
  1573.  
  1574. <6>[    8.909790] adb_release
  1575.  
  1576. <6>[    8.910217] mtp_bind_config
  1577.  
  1578. <6>[    8.910369] adb_bind_config
  1579.  
  1580. <3>[    8.913513] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  1581.  
  1582. <6>[    8.913665] USB fast charging is OFF.
  1583.  
  1584. <6>[    8.913726] msm_otg msm_otg: Avail curr from USB = 2
  1585.  
  1586. <6>[    8.913848] msm_otg msm_otg: current: 500 -> 2 (mA)
  1587.  
  1588. <7>[    8.913940] msm_otg msm_otg: Power Supply doesn't support USB charger
  1589.  
  1590. <6>[    8.913940] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_SUSPEND_EVENT received
  1591.  
  1592. <7>[    8.914062] peripheral bus suspend
  1593.  
  1594. <6>[    8.925476] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts:
  1595.  
  1596. <7>[    8.925750] SELinux: initialized (dev mmcblk0p22, type ext4), uses xattr
  1597.  
  1598. <3>[    9.033081] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  1599.  
  1600. <6>[    9.033477] USB fast charging is OFF.
  1601.  
  1602. <6>[    9.033691] msm_otg msm_otg: Avail curr from USB = 0
  1603.  
  1604. <7>[    9.034088] msm_otg msm_otg: Power Supply doesn't support USB charger
  1605.  
  1606. <6>[    9.034271] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
  1607.  
  1608. <7>[    9.035339] portsc = 88000a05
  1609.  
  1610. <6>[    9.120178] android_work: android_work: sent uevent USB_STATE=CONNECTED
  1611.  
  1612. <6>[    9.145812] android_usb gadget: high-speed config #1: android_usb
  1613.  
  1614. <3>[    9.145935] msm_otg msm_otg: Failed notifying 1 charger type to PMIC
  1615.  
  1616. <6>[    9.146057] USB fast charging is OFF.
  1617.  
  1618. <6>[    9.146148] msm_otg msm_otg: Avail curr from USB = 500
  1619.  
  1620. <7>[    9.146270] msm_otg msm_otg: Power Supply doesn't support USB charger
  1621.  
  1622. <6>[    9.198303] android_work: android_work: sent uevent USB_STATE=CONFIGURED
  1623.  
  1624. <6>[    9.713928] mtp_open
  1625.  
  1626. <5>[   64.329589] bq27541_get_psp status: Full ret= 0x0281
  1627.  
  1628. <5>[   64.330291] bq27541_get_psp status: Full ret= 0x0281
  1629.  
  1630. <5>[   64.330932] bq27541_get_psp voltage_now= 4286000 uV
  1631.  
  1632. <5>[   64.331604] bq27541_get_capacity = 100% ret= 100
  1633.  
  1634. <5>[   64.332244] bq27541_get_psp temperature= 289 (0.1¢XC)
  1635.  
  1636. <5>[   64.332916] bq27541_get_psp current_now = -92 mA
  1637.  
  1638. <5>[   64.333557] bq27541_get_psp charge_now (compensated) = 3817000 uAh
  1639.  
  1640. <5>[   64.334228] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh
  1641.  
  1642. <5>[   64.334869] bq27541_get_psp charge_full = 3817000 uAh
  1643.  
  1644. <5>[   64.335540] bq27541_get_psp charge_design = 3828000 uAh
  1645.  
  1646. <5>[   64.336181] bq27541_get_psp energy_now = 14658000 uWh
  1647.  
  1648. <5>[   64.336822] bq27541_get_psp charge_counter = 2000 uWh
  1649.  
  1650. <5>[   64.337493] bq27541_get_psp power_now = -394000 uW
  1651.  
  1652. <5>[   64.338134] bq27541_get_psp cycle count = 88
  1653.  
  1654. <5>[   64.419891] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
  1655.  
  1656. <5>[   64.420318] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4292000
  1657.  
  1658. <5>[   64.421051] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV
  1659.  
  1660. <5>[   64.421630] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
  1661.  
  1662. <5>[   69.044677] bq27541_get_capacity = 100% ret= 100
  1663.  
  1664. <5>[   69.045593] bq27541_get_psp status: Full ret= 0x0281
  1665.  
  1666. <5>[  124.649688] bq27541_get_psp status: Full ret= 0x0281
  1667.  
  1668. <5>[  124.650695] bq27541_get_psp status: Full ret= 0x0281
  1669.  
  1670. <5>[  124.651519] bq27541_get_psp voltage_now= 4286000 uV
  1671.  
  1672. <5>[  124.652465] bq27541_get_capacity = 100% ret= 100
  1673.  
  1674. <5>[  124.653259] bq27541_get_psp temperature= 291 (0.1¢XC)
  1675.  
  1676. <5>[  124.654205] bq27541_get_psp current_now = -90 mA
  1677.  
  1678. <5>[  124.654998] bq27541_get_psp charge_now (compensated) = 3817000 uAh
  1679.  
  1680. <5>[  124.655944] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh
  1681.  
  1682. <5>[  124.656738] bq27541_get_psp charge_full = 3817000 uAh
  1683.  
  1684. <5>[  124.657684] bq27541_get_psp charge_design = 3828000 uAh
  1685.  
  1686. <5>[  124.658477] bq27541_get_psp energy_now = 14658000 uWh
  1687.  
  1688. <5>[  124.659301] bq27541_get_psp charge_counter = 4000 uWh
  1689.  
  1690. <5>[  124.660247] bq27541_get_psp power_now = -386000 uW
  1691.  
  1692. <5>[  124.661041] bq27541_get_psp cycle count = 88
  1693.  
  1694. <5>[  124.740386] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
  1695.  
  1696. <5>[  124.740722] smb345_charger: [smb345_config_thermal_charging] temp=28, volt=4286000
  1697.  
  1698. <5>[  124.741271] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV
  1699.  
  1700. <5>[  124.741729] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
  1701.  
  1702. <5>[  129.929534] bq27541_get_capacity = 100% ret= 100
  1703.  
  1704. <5>[  129.930541] bq27541_get_psp status: Full ret= 0x0281
  1705.  
  1706. <5>[  184.809692] bq27541_get_psp status: Full ret= 0x0281
  1707.  
  1708. <5>[  184.810699] bq27541_get_psp status: Full ret= 0x0281
  1709.  
  1710. <5>[  184.811523] bq27541_get_psp voltage_now= 4285000 uV
  1711.  
  1712. <5>[  184.812469] bq27541_get_capacity = 100% ret= 100
  1713.  
  1714. <5>[  184.813262] bq27541_get_psp temperature= 293 (0.1¢XC)
  1715.  
  1716. <5>[  184.814208] bq27541_get_psp current_now = -91 mA
  1717.  
  1718. <5>[  184.815002] bq27541_get_psp charge_now (compensated) = 3817000 uAh
  1719.  
  1720. <5>[  184.815948] bq27541_get_psp charge_avg (uncompensated) = 3869000 uAh
  1721.  
  1722. <5>[  184.816741] bq27541_get_psp charge_full = 3817000 uAh
  1723.  
  1724. <5>[  184.817687] bq27541_get_psp charge_design = 3828000 uAh
  1725.  
  1726. <5>[  184.818481] bq27541_get_psp energy_now = 14658000 uWh
  1727.  
  1728. <5>[  184.819305] bq27541_get_psp charge_counter = 5000 uWh
  1729.  
  1730. <5>[  184.820037] bq27541_get_psp power_now = -390000 uW
  1731.  
  1732. <5>[  184.820709] bq27541_get_psp cycle count = 88
  1733.  
  1734. <5>[  184.900695] smb345_charger: [smb345_config_thermal_limit] Bypass set HRD SFT limit=73
  1735.  
  1736. <5>[  184.901062] smb345_charger: [smb345_config_thermal_charging] temp=29, volt=4286000
  1737.  
  1738. <5>[  184.901611] smb345_charger: [smb345_config_thermal_charging] Bypass set Float Volt setting=e8 V=4300mV
  1739.  
  1740. <5>[  184.902069] smb345_charger: [smb345_config_thermal_charging] Bypass charger enable
  1741.  
  1742. <5>[  191.041015] bq27541_get_capacity = 100% ret= 100
  1743.  
  1744. <5>[  191.042022] bq27541_get_psp status: Full ret= 0x0281
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top