SHARE
TWEET

xbian_mceusb_lirc_no_key_numeric

a guest Feb 21st, 2013 18 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. root@else ~ # lsusb
  2. Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
  3. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  4. Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
  5. Bus 001 Device 004: ID 147a:e03e Formosa Industrial Computing, Inc. Infrared Receiver [IR605A/Q]
  6. root@else ~ #
  7.  
  8. root@else ~ # cat /proc/bus/input/devices
  9. I: Bus=0003 Vendor=147a Product=e03e Version=1101
  10. N: Name="Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e)"
  11. P: Phys=usb-bcm2708_usb-1.3
  12. S: Sysfs=/devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0/input0
  13. U: Uniq=
  14. H: Handlers=kbd event0
  15. B: PROP=0
  16. B: EV=100013
  17. B: KEY=fff 0 0 200 108fc32e 2376051 0 0 0 7 158000 4192 4001 8e9680 0 0 10000000
  18. B: MSC=10
  19.  
  20. I: Bus=0000 Vendor=0000 Product=0000 Version=0000
  21. N: Name="MCE IR Keyboard/Mouse (mceusb)"
  22. P: Phys=/input0
  23. S: Sysfs=/devices/virtual/input/input1
  24. U: Uniq=
  25. H: Handlers=sysrq kbd mouse0 event1
  26. B: PROP=0
  27. B: EV=100017
  28. B: KEY=30000 0 7 ff87207a c14057ff febeffdf ffefffff ffffffff fffffffe
  29. B: REL=3
  30. B: MSC=10
  31.  
  32. root@else ~ #
  33.  
  34. root@else ~ # dmesg
  35. [    0.000000] Booting Linux on physical CPU 0
  36. [    0.000000] Initializing cgroup subsys cpu
  37. [    0.000000] Linux version 3.6.11+ (root@xbian) (gcc version 4.7.3 20121001 (prerelease) (crosstool-NG 1.17.0) ) #3 PREEMPT Tue Jan 8 22:27:29 CET 2013
  38. [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  39. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  40. [    0.000000] Machine: BCM2708
  41. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  42. [    0.000000] On node 0 totalpages: 98304
  43. [    0.000000] free_area_init_node: node 0, pgdat c056f670, node_mem_map c0619000
  44. [    0.000000]   Normal zone: 768 pages used for memmap
  45. [    0.000000]   Normal zone: 0 pages reserved
  46. [    0.000000]   Normal zone: 97536 pages, LIFO batch:31
  47. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  48. [    0.000000] pcpu-alloc: [0] 0
  49. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
  50. [    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1366 bcm2708_fb.fbheight=768 bcm2708.boardrev=0xf bcm2708.serial=0xbb1919cb smsc95xx.macaddr=B8:27:EB:19:19:CB sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.fiq_fix_enable=1 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty2 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait logo.nologo quiet loglevel=0 splash
  51. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  52. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  53. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  54. [    0.000000] allocated 786432 bytes of page_cgroup
  55. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  56. [    0.000000] Memory: 384MB = 384MB total
  57. [    0.000000] Memory: 380688k/380688k available, 12528k reserved, 0K highmem
  58. [    0.000000] Virtual kernel memory layout:
  59. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  60. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  61. [    0.000000]     vmalloc : 0xd8800000 - 0xff000000   ( 616 MB)
  62. [    0.000000]     lowmem  : 0xc0000000 - 0xd8000000   ( 384 MB)
  63. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  64. [    0.000000]       .text : 0xc0008000 - 0xc05148fc   (5171 kB)
  65. [    0.000000]       .init : 0xc0515000 - 0xc0539dac   ( 148 kB)
  66. [    0.000000]       .data : 0xc053a000 - 0xc05701a0   ( 217 kB)
  67. [    0.000000]        .bss : 0xc05701c4 - 0xc06186cc   ( 674 kB)
  68. [    0.000000] NR_IRQS:330
  69. [    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
  70. [    0.000000] Console: colour dummy device 80x30
  71. [    0.000000] console [tty2] enabled
  72. [    0.000389] Calibrating delay loop... 464.48 BogoMIPS (lpj=2322432)
  73. [    0.060049] pid_max: default: 32768 minimum: 301
  74. [    0.060382] Mount-cache hash table entries: 512
  75. [    0.061135] Initializing cgroup subsys cpuacct
  76. [    0.061163] Initializing cgroup subsys memory
  77. [    0.061220] Initializing cgroup subsys devices
  78. [    0.061235] Initializing cgroup subsys freezer
  79. [    0.061247] Initializing cgroup subsys blkio
  80. [    0.061327] CPU: Testing write buffer coherency: ok
  81. [    0.061645] hw perfevents: enabled with v6 PMU driver, 3 counters available
  82. [    0.061750] Setting up static identity map for 0x3b3ad8 - 0x3b3b34
  83. [    0.063280] devtmpfs: initialized
  84. [    0.072200] NET: Registered protocol family 16
  85. [    0.077125] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  86. [    0.078258] bcm2708.uart_clock = 0
  87. [    0.079708] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  88. [    0.079727] hw-breakpoint: maximum watchpoint size is 4 bytes.
  89. [    0.079740] mailbox: Broadcom VideoCore Mailbox driver
  90. [    0.079815] bcm2708_vcio: mailbox at f200b880
  91. [    0.079898] bcm_power: Broadcom power driver
  92. [    0.079916] bcm_power_open() -> 0
  93. [    0.079926] bcm_power_request(0, 8)
  94. [    0.580600] bcm_mailbox_read -> 00000080, 0
  95. [    0.580617] bcm_power_request -> 0
  96. [    0.580627] Serial: AMBA PL011 UART driver
  97. [    0.580757] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
  98. [    0.601122] bio: create slab <bio-0> at 0
  99. [    0.601994] SCSI subsystem initialized
  100. [    0.602219] usbcore: registered new interface driver usbfs
  101. [    0.602325] usbcore: registered new interface driver hub
  102. [    0.602584] usbcore: registered new device driver usb
  103. [    0.604002] Switching to clocksource stc
  104. [    0.604237] FS-Cache: Loaded
  105. [    0.604505] CacheFiles: Loaded
  106. [    0.617468] NET: Registered protocol family 2
  107. [    0.618295] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  108. [    0.618736] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  109. [    0.618993] TCP: Hash tables configured (established 16384 bind 16384)
  110. [    0.619038] TCP: reno registered
  111. [    0.619059] UDP hash table entries: 256 (order: 0, 4096 bytes)
  112. [    0.619090] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  113. [    0.619364] NET: Registered protocol family 1
  114. [    0.619996] RPC: Registered named UNIX socket transport module.
  115. [    0.620020] RPC: Registered udp transport module.
  116. [    0.620031] RPC: Registered tcp transport module.
  117. [    0.620040] RPC: Registered tcp NFSv4.1 backchannel transport module.
  118. [    0.620342] Trying to unpack rootfs image as initramfs...
  119. [    0.856853] Freeing initrd memory: 1988K
  120. [    0.857522] bcm2708_dma: DMA manager at f2007000
  121. [    0.857629] bcm2708_gpio: bcm2708_gpio_probe c0547e68
  122. [    0.858031] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  123. [    0.859025] audit: initializing netlink socket (disabled)
  124. [    0.859095] type=2000 audit(0.850:1): initialized
  125. [    0.979816] VFS: Disk quotas dquot_6.5.2
  126. [    0.979905] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  127. [    0.980322] FS-Cache: Netfs 'nfs' registered for caching
  128. [    0.980701] NFS: Registering the id_resolver key type
  129. [    0.980810] Key type id_resolver registered
  130. [    0.980825] Key type id_legacy registered
  131. [    0.981175] msgmni has been set to 747
  132. [    0.983268] io scheduler noop registered
  133. [    0.983292] io scheduler deadline registered
  134. [    0.983324] io scheduler cfq registered (default)
  135. [    0.988752] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
  136. [    0.988772] crc32: self tests passed, processed 225944 bytes in 2584000 nsec
  137. [    0.990693] crc32c: CRC_LE_BITS = 64
  138. [    0.990706] crc32c: self tests passed, processed 225944 bytes in 931000 nsec
  139. [    1.018456] Console: switching to colour frame buffer device 170x48
  140. [    1.041264] brd: module loaded
  141. [    1.046575] loop: module loaded
  142. [    1.046955] vchiq: vchiq_init_state: slot_zero = 0xd8804000, is_master = 0
  143. [    1.048255] usbcore: registered new interface driver smsc95xx
  144. [    1.048425] usbcore: registered new interface driver cdc_ncm
  145. [    1.048449] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  146. [    1.253633] Core Release: 2.80a
  147. [    1.253663] Setting default values for core params
  148. [    1.253719] Finished setting default values for core params
  149. [    1.458866] Using Buffer DMA mode
  150. [    1.458891] Periodic Transfer Interrupt Enhancement - disabled
  151. [    1.458902] Multiprocessor Interrupt Enhancement - disabled
  152. [    1.458915] OTG VER PARAM: 0, OTG VER FLAG: 0
  153. [    1.458932] Dedicated Tx FIFOs mode
  154. [    1.459147] dwc_otg: Microframe scheduler enabled
  155. [    1.459202] dwc_otg bcm2708_usb: DWC OTG Controller
  156. [    1.459260] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  157. [    1.459329] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  158. [    1.459402] Init: Port Power? op_state=1
  159. [    1.459413] Init: Power Port (0)
  160. [    1.459540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  161. [    1.459564] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  162. [    1.459583] usb usb1: Product: DWC OTG Controller
  163. [    1.459599] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
  164. [    1.459614] usb usb1: SerialNumber: bcm2708_usb
  165. [    1.460428] hub 1-0:1.0: USB hub found
  166. [    1.460477] hub 1-0:1.0: 1 port detected
  167. [    1.460836] dwc_otg: FIQ enabled
  168. [    1.460853] dwc_otg: NAK holdoff enabled
  169. [    1.460874] Module dwc_common_port init
  170. [    1.461110] Initializing USB Mass Storage driver...
  171. [    1.461332] usbcore: registered new interface driver usb-storage
  172. [    1.461347] USB Mass Storage support registered.
  173. [    1.461494] usbcore: registered new interface driver libusual
  174. [    1.461801] mousedev: PS/2 mouse device common for all mice
  175. [    1.462441] bcm2835-cpufreq: min=700000 max=840000 cur=700000
  176. [    1.462579] bcm2835-cpufreq: switching to governor performancebcm2835-cpufreq: switching to governor performance
  177. [    1.463587] cpuidle: using governor ladder
  178. [    1.463603] cpuidle: using governor menu
  179. [    1.463670] sdhci: Secure Digital Host Controller Interface driver
  180. [    1.463679] sdhci: Copyright(c) Pierre Ossman
  181. [    1.463763] sdhci: Enable low-latency mode
  182. [    1.464001] Registered led device: mmc0::
  183. [    1.504233] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  184. [    1.504290] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  185. [    1.504359] sdhci-pltfm: SDHCI platform and OF driver helper
  186. [    1.504650] usbcore: registered new interface driver usbhid
  187. [    1.504664] usbhid: USB HID core driver
  188. [    1.505470] TCP: cubic registered
  189. [    1.505489] Initializing XFRM netlink socket
  190. [    1.505526] NET: Registered protocol family 17
  191. [    1.505662] Key type dns_resolver registered
  192. [    1.506077] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  193. [    1.506831] registered taskstats version 1
  194. [    1.512457] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  195. [    1.515906] Freeing init memory: 144K
  196. [    1.596013] mmc0: could read SD Status register (SSR) at the 2th attempt
  197. [    1.603899] mmc0: new high speed SDHC card at address e624
  198. [    1.614192] mmcblk0: mmc0:e624 SU04G 3.69 GiB
  199. [    1.616696]  mmcblk0: p1 p2
  200. [    1.654262] Indeed it is in host mode hprt0 = 00021501
  201. [    1.884223] usb 1-1: new high-speed USB device number 2 using dwc_otg
  202. [    1.884388] Indeed it is in host mode hprt0 = 00001101
  203. [    2.174470] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
  204. [    2.174499] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  205. [    2.175165] hub 1-1:1.0: USB hub found
  206. [    2.175287] hub 1-1:1.0: 3 ports detected
  207. [    2.249418] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
  208. [    2.262057] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  209. [    2.287217] EXT4-fs error (device mmcblk0p2): ext4_mb_generate_buddy:741: group 6, 7335 clusters in bitmap, 7336 in gd
  210. [    2.287351] JBD2: Spotted dirty metadata buffer (dev = mmcblk0p2, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
  211. [    2.454473] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  212. [    2.554505] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  213. [    2.554532] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  214. [    2.557582] smsc95xx v1.0.4
  215. [    2.618784] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:19:19:cb
  216. [    2.714264] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
  217. [    2.818271] usb 1-1.3: New USB device found, idVendor=147a, idProduct=e03e
  218. [    2.818300] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  219. [    2.818315] usb 1-1.3: Product: eHome Infrared Transceiver
  220. [    2.818328] usb 1-1.3: Manufacturer: Formosa21
  221. [    2.818340] usb 1-1.3: SerialNumber: 000083BF
  222. [   12.815799] hid-generic 0003:147A:E03E.0001: timeout initializing reports
  223. [   12.816392] hid-generic 0003:147A:E03E.0001: hiddev0,hidraw0: USB HID v1.00 Device [Formosa21 eHome Infrared Transceiver] on usb-bcm2708_usb-1.3/input1
  224. [   15.094151] Registered IR keymap rc-rc6-mce
  225. [   15.094673] input: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0/input0
  226. [   15.094710] rc0: Media Center Ed. eHome Infrared Remote Transceiver (147a:e03e) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/1-1.3:1.0/rc/rc0
  227. [   15.122512] IR NEC protocol handler initialized
  228. [   15.145806] IR RC5(x) protocol handler initialized
  229. [   15.174774] IR RC6 protocol handler initialized
  230. [   15.200550] IR JVC protocol handler initialized
  231. [   15.232804] IR Sony protocol handler initialized
  232. [   15.254826] IR SANYO protocol handler initialized
  233. [   15.285284] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input1
  234. [   15.285592] IR MCE Keyboard/mouse protocol handler initialized
  235. [   15.311944] lirc_dev: IR Remote Control driver registered, major 250
  236. [   15.315339] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
  237. [   15.315362] IR LIRC bridge handler initialized
  238. [   15.364267] mceusb 1-1.3:1.0: Registered Formosa21 eHome Infrared Transceiver with mce emulator interface version 2
  239. [   15.364298] mceusb 1-1.3:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
  240. [   15.364492] usbcore: registered new interface driver mceusb
  241. [   17.861622] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  242. [   18.439557] bcm2835 ALSA card created!
  243. [   18.441226] bcm2835 ALSA chip created!
  244. [   18.441477] bcm2835 ALSA chip created!
  245. [   18.441660] bcm2835 ALSA chip created!
  246. [   18.441808] bcm2835 ALSA chip created!
  247. [   18.441949] bcm2835 ALSA chip created!
  248. [   18.442090] bcm2835 ALSA chip created!
  249. [   18.442264] bcm2835 ALSA chip created!
  250. [   18.555071] bcm2708 watchdog, heartbeat=10 sec (nowayout=0)
  251. [   21.856910] Adding 127996k swap on /var/swapfile.  Priority:-1 extents:3 across:160764k SS
  252. [   22.677652] mmc0: missed completion of cmd 18 DMA (512/512 [1]/[1]) - ignoring it
  253. [   22.677689] mmc0: DMA IRQ 6 ignored - results were reset
  254. [   25.833532] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  255. [   26.852063] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
  256. [   29.621258] CIFS: no cache= option specified, using "cache=loose". This default will change to "cache=strict" in 3.7.
  257. [   29.697560] CIFS VFS: default security mechanism requested.  The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3
  258. [   33.448754] watchdog stopped
  259. [  302.564090] EXT4-fs (mmcblk0p2): error count: 3
  260. [  302.564173] EXT4-fs (mmcblk0p2): initial error at 25: ext4_remount:4584
  261. [  302.564191] EXT4-fs (mmcblk0p2): last error at 2: ext4_mb_generate_buddy:741
  262. root@else ~ #
  263. [   18.441808] bcm2835
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top