Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.15-200.fc34.x86_64] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD140EDGZ-11B1PA0
- Serial Number:
- LU WWN Device Id:
- Firmware Version: 85.00A85
- User Capacity: 14,000,519,643,136 bytes [14.0 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Nov 5 21:58:55 2021 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 101) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1486) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
- 2 Throughput_Performance 0x0004 133 133 054 Old_age Offline - 108
- 3 Spin_Up_Time 0x0007 089 089 001 Pre-fail Always - 153 (Average 298)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 7
- 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000a 100 100 001 Old_age Always - 0
- 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 49
- 10 Spin_Retry_Count 0x0012 100 100 001 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
- 22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 9
- 194 Temperature_Celsius 0x0002 007 007 000 Old_age Always - 61 (Min/Max 24/61)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.15-200.fc34.x86_64] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD140EDGZ-11B1PA0
- Serial Number:
- LU WWN Device Id:
- Firmware Version: 85.00A85
- User Capacity: 14,000,519,643,136 bytes [14.0 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Nov 5 21:58:55 2021 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 101) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1642) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
- 2 Throughput_Performance 0x0004 130 130 054 Old_age Offline - 120
- 3 Spin_Up_Time 0x0007 089 089 001 Pre-fail Always - 154 (Average 316)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 7
- 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000a 100 100 001 Old_age Always - 0
- 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 78
- 10 Spin_Retry_Count 0x0012 100 100 001 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
- 22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 10
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 10
- 194 Temperature_Celsius 0x0002 013 013 000 Old_age Always - 57 (Min/Max 23/58)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.14.15-200.fc34.x86_64] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD140EDGZ-11B1PA0
- Serial Number:
- LU WWN Device Id:
- Firmware Version: 85.00A85
- User Capacity: 14,000,519,643,136 bytes [14.0 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Nov 5 21:58:56 2021 PDT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x80) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 101) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1445) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
- 2 Throughput_Performance 0x0004 100 100 054 Old_age Offline - 0
- 3 Spin_Up_Time 0x0007 094 094 001 Pre-fail Always - 244
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 4
- 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000a 100 100 001 Old_age Always - 0
- 8 Seek_Time_Performance 0x0004 100 100 020 Old_age Offline - 0
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 21
- 10 Spin_Retry_Count 0x0012 100 100 001 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 4
- 22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 5
- 194 Temperature_Celsius 0x0002 048 048 000 Old_age Always - 34 (Min/Max 23/34)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement