Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl version 5.38 [powerpc-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
- Home page is http://smartmontools.sourceforge.net/
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD20EARS-00MVWB0
- Serial Number: WD-WCAZA6826124
- Firmware Version: 51.0AB51
- User Capacity: 2,000,398,934,016 bytes
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Mon Aug 20 13:00:28 2012 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (36660) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3035) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 199 199 051 Pre-fail Always - 3075
- 3 Spin_Up_Time 0x0027 253 166 021 Pre-fail Always - 1025
- 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3276
- 5 Reallocated_Sector_Ct 0x0033 197 197 140 Pre-fail Always - 74
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 9316
- 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 29
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 27
- 193 Load_Cycle_Count 0x0032 102 102 000 Old_age Always - 296706
- 194 Temperature_Celsius 0x0022 087 077 000 Old_age Always - 63
- 196 Reallocated_Event_Count 0x0032 150 150 000 Old_age Always - 50
- 197 Current_Pending_Sector 0x0032 200 001 000 Old_age Always - 197
- 198 Offline_Uncorrectable 0x0030 199 199 000 Old_age Offline - 399
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 191 191 000 Old_age Offline - 2635
- SMART Error Log Version: 1
- ATA Error Count: 1
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1 occurred at disk power-on lifetime: 8968 hours (373 days + 16 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 80 80 b7 2b e8 Error: UNC 128 sectors at LBA = 0x082bb780 = 137082752
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 80 80 b7 2b e8 08 10d+02:50:06.249 READ DMA
- c8 00 08 00 47 3a e0 08 10d+02:50:06.247 READ DMA
- c8 00 08 f8 46 3a e0 08 10d+02:50:06.247 READ DMA
- c8 00 08 f0 46 3a e0 08 10d+02:50:06.247 READ DMA
- c8 00 08 e8 46 3a e0 08 10d+02:50:06.246 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Interrupted (host reset) 10% 9181 -
- # 2 Short offline Completed without error 00% 9155 -
- # 3 Extended offline Aborted by host 90% 9102 -
- # 4 Short offline Completed: read failure 10% 9102 627458432
- # 5 Short offline Completed: read failure 90% 9101 210134350
- # 6 Short offline Completed: read failure 10% 9100 561043375
- # 7 Short offline Completed: read failure 90% 9100 210134345
- # 8 Short offline Completed: read failure 80% 9099 506789655
- # 9 Short offline Completed: read failure 10% 9099 622959985
- #10 Short offline Completed without error 00% 9098 -
- #11 Short offline Completed: read failure 10% 9098 622959985
- #12 Short offline Completed: read failure 10% 9098 627549899
- #13 Short offline Completed: read failure 10% 9088 627549870
- #14 Short offline Completed without error 00% 9088 -
- #15 Extended offline Completed: read failure 90% 9073 210134344
- #16 Short offline Aborted by host 90% 9073 -
- #17 Short offline Aborted by host 90% 9073 -
- #18 Short offline Interrupted (host reset) 50% 9073 -
- #19 Short offline Aborted by host 80% 9073 -
- #20 Short offline Completed without error 00% 49 -
- #21 Short offline Aborted by host 90% 1 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement