API tools faq
paste
Advertisement
Guest User

RK322x UART

a guest
Jan 31st, 2019
365
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 36.67 KB | None | 0 0
raw download clone embed print report
  1. DDR Version V1.06 20171130_1_xintu_en_rd_odt
  2. In
  3. 330MHz
  4. DDR3
  5. Bus Width=16 Col=11 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  6. mach:2
  7. OUT
  8. Boot1 Release Time: Nov 27 2017 10:11:34, version: 2.47
  9. ChipType = 0xc, 338
  10. No.1 FLASH ID:45 de 94 93 76 51
  11. No.2 FLASH ID:24 ff ff ff ff ff
  12. No.3 FLASH ID:24 ff ff ff ff ff
  13. No.4 FLASH ID:24 ff ff ff ff ff
  14. sync para 26
  15. ECC:60
  16. kksK▒▒&▒
  17. StorageInit ok = 224957
  18. SecureMode = 0
  19. Code check OK! theLoader 0x60000000, 236514
  20. Code check OK! theLoader 0x68400000, 245743
  21. Enter Trust OS
  22. INF TEE-CORE:init_primary_helper:319: Initializing (1.0.1-72-gf230aa2 #2 Fri Sep 29 10:22:10 UTC 2017 arm)
  23. INF TEE-CORE:init_primary_helper:320: Release version: 2.0
  24. INF TEE-CORE:init_teecore:79: teecore inits done
  25.  
  26.  
  27. U-Boot 2014.10-RK322X-06-02579-g173bad6 (Dec 09 2017 - 11:44:55)
  28.  
  29. CPU: rk322x
  30. cpu version = 3
  31. CPU's clock information:
  32. arm pll = 600000000HZ
  33. periph pll = 600000000HZ
  34. ddr pll = 660000000HZ
  35. codec pll = 500000000HZ
  36. Board: Rockchip platform Board
  37. Uboot as second level loader
  38. DRAM: Found dram banks: 1
  39. Adding bank:0000000060000000(0000000040000000)
  40. Reserve memory for trust os.
  41. dram reserve bank: base = 0x68400000, size = 0x00100000
  42. 128 MiB
  43. GIC CPU mask = 0x00000001
  44. rk dma pl330 version: 1.4
  45. remotectl v0.1
  46. pwm freq=0x11e1a3
  47. pwm_freq▒mcInit = 0 20
  48. SdmmcInit = 2 20
  49. storage init OK!
  50. Using default environment
  51.  
  52. GetParam
  53. Load FDT from boot image.
  54. can't find dts node for fixed
  55. No pmic detect.
  56. SecureBootEn = 0, SecureBootLock = 0
  57.  
  58. #Boot ver: 2017-12-09#2.37
  59. empty serial no.
  60. normal boot.
  61. checkKey
  62. vbus = 1
  63. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
  64. no fuel gauge found
  65. no fuel gauge found
  66. can't find power_ctr node for lcdc0
  67. HDMI: no pull up gpio
  68. can't find dts node for deviceinfo
  69. rk_hdmi_register:fail to read deviceinfo
  70. hdmi baseparamer 0x0@0-0
  71. left = 0, right = 0, top = 0, bottom = 0, overscan = 0
  72. panel->left = 100 , panel->right = 100 ,panel->top = 100, panel->bottom = 100, p anel->overscan = 100
  73. preset tve resolution is 720x576@50-1,i=1
  74. Hdmi Devices Not Exist.
  75. can't find dts node for rk312x-tve
  76. SCREEN_TVOUT
  77. rk3036_tve_init:use baseparamer config g_tve_pos = 1
  78. read logo on state from dts [1]
  79. no fuel gauge found
  80. checkKey
  81. vbus = 1
  82. board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
  83. Hit any key to stop autoboot: 0
  84. vendor read error!
  85. Set oem_unlocked=0Secure Boot state: 0
  86. kernel @ 0x62000000 (0x007032c8)
  87. ramdisk @ 0x65bf0000 (0x00167d8c)
  88. bootrk: do_bootm_linux...
  89. Loading Device Tree to 65600000, end 656148ef ... OK
  90. Add bank:0000000060000000, 0000000008400000
  91. Add bank:0000000068500000, 0000000037b00000
  92. WARNING: could not set reg FDT_ERR_BADOFFSET.
  93.  
  94. Starting kernel ...
  95.  
  96. <hit enter to activate fiq debugger>
  97. [ 0.000000] Booting Linux on physical CPU 0xf00
  98. [ 0.000000] Initializing cgroup subsys cpuset
  99. [ 0.000000] Initializing cgroup subsys cpu
  100. [ 0.000000] Initializing cgroup subsys cpuacct
  101. [ 0.000000] Linux version 3.10.104 (qiaohy@server1) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #21 SMP PREEMPT Sat Dec 9 12:00:59 CST 2017
  102. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  103. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
  104. [ 0.000000] Machine: Rockchip RK3229, model: rockchip,rk3229
  105. [ 0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x9dc00000, offset:0x0 1000000
  106. [ 0.000000] hdmi init vic is 65536
  107. [ 0.000000] cvbs init tve.format is 1
  108. [ 0.000000] cvbs init tve.format is 1
  109. [ 0.000000] cvbs init tve.format is 1
  110. [ 0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x9dc00000 for ubo ot logo
  111. [ 0.000000] rockchip_ion_reserve
  112. [ 0.000000] ion heap(cma): base(0) size(0) align(0)
  113. [ 0.000000] ion heap0) size(0) align(0)
  114. [ 0.000000] ion heap(vmalloc): base(0) s 0.000000] cma: CMA: reserved 16 Mi B at 7f000000
  115. [ 0.00000 disabled, Data cache writealloc
  116. [ 0.000000] psci: probing fvice-tree
  117. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c17550002 u36864
  118. [ 0.000000] Built 1 zonelists in Zone order, mobilil pages: 260864
  119. [ 0.000000] Kernel command line: vmalloc=496hip_jtag console=ttyFIQ0 androidb oot.selinux=disabled androidboooot.console=ttyFIQ0 init=/init mtdparts=rk29xxnan d:0x00002000@0x4000@0x00004000(trust),0x00002000@0x00008000(misc),0x00000800@0xr ),0x00007800@0x0000A800(resource),0x00006000@0x00012000(kernel)0(boot),0x0001000 0@0x0001E000(recovery),0x00020000@0x0002E000(ba0004E000(cache),0x00008000@0x0008 E000(metadata),0x00002000@0x00000000@0x00098000(system),-@0x00498000(userdata) s toragemedia=nan0000@0x9dc00000:0x01000000 loader.timestamp=2017-12-09_11:44:55 . format=1 SecureBootCheckOk=0
  120. [ 0.000000] rockchip jtag enab PID hash table entries: 2048 (order: 1, 8192 b ytes)
  121. [ 0.000h table entries: 65536 (order: 6, 262144 bytes)
  122. [ 0.000000] ble entries: 32768 (order: 5, 131072 bytes)
  123. [ 0.000000] allof page_cgroup
  124. [ 0.000000] please try 'cgroup_disable=memory't want memory cgroups
  125. [ 0.000000] Memory: 132MB 891MB = 10230000] Memory: 970356k/970356k available , 77196k reserved, 49151600] Virtual kernel memory layout:
  126. [ 0.000000] vector : f1000 ( 4 kB)
  127. [ 0.000000] fixmap : 0xfff00000 - 0xf
  128. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 M lowmem : 0xc00 00000 - 0xe0000000 ( 512 MB)
  129. [ 0.000000]e00000 - 0xc0000000 ( 2 MB)
  130. [ 0.000000] modules : 0x( 14 MB)
  131. [ 0.000000] .text : 0xc0008000 - 0xc0ca90b8 0.000000] .init : 0x c0caa000 - 0xc0d09480 ( 382 kB)
  132. [ .data : 0xc0d0a000 - 0xc0df2aa0 ( 931 kB)
  133. [ 0.000000] - 0xc0f1abdc (1185 kB)
  134. [ 0.000000] SLUB: HWalign=64, Order CPUs=4, Nodes=1
  135. [ 0.000000] Preemptible hierarchical RCU im 0.000000] RCU dyntick-idle grace-period acceleration is enablNR_IRQS:16 nr_irqs:16 16
  136. [ 0.000000] rk_clk_tree_init start!_get_uboot_display_flag: uboot_logo_on = 1
  137. [ 0.000000] rkclkt = 13
  138. [ 0.000000] rkclk_init_clks: cnt_rate = 19
  139. [ 0.00p15 timer(s) running at 24.00MHz (phys).
  140. [ 0.000000] Switchidelay loop
  141. [ 0.000000] sched_clock: ARM arch timer >56 bits on 41ns
  142. [ 0.000000] process version: 0
  143. [ 0.000000] chann.000000] target-temp:80
  144. [ 0.000000] channel:2, lkg:3
  145. [ 0ck: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294962] Calibra ting delay loop (skipped), value calculated using time BogoMIPS (lpj=240000)
  146. [ 1.844677] pid_max: default: 32768 m44912] Security Framework initialized
  147. [ 1.844943] SELinux: 1.845076] Mount-cache hash table entries: 512
  148. [ 1.846246] Isubsys debug
  149. [ 1.846273] Initializing cgroup subsys memory
  150. alizing cgroup subsys freezer
  151. [ 1.846394] CPU: Testing writeok
  152. us/cpu@1 missing clock-frequency propertyfrequency property
  153. [ 1.847041] /cpus/frequency property
  154. [ 1.847058] /cpus/cpu@3 missing clock-fre 1.847175] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  155. [g up static identity map for 0xc08d5f20 - 0xc08d5f78
  156. [ 1.850e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 en 3.1)
  157. [ 1.922878] CPU1: Booted secondary processor
  158. [ 1.ad -1, cpu 1, socket 15, mpidr 80000f01
  159. [ 1.942551] CPU2: Boessor
  160. [ 1.942601] CPU2: thread -1, cpu 2, socket 15, mpidr 82264] CPU3: Booted seco ndary processor
  161. [ 1.962310] CPU3: thret 15, mpidr 80000f03
  162. [ 1.962491] Brought up 4 CPUs
  163. [ 1. of 4 processors activated (192.00 BogoMIPS).
  164. [ 1.962552] CPn SVC mode.
  165. [ 1.964073] devtmpfs: initialized
  166. [ 1.972261: implementor 41 architecture 2 part 30 variant 7 rev 5
  167. [ 1.e: initialized pinctrl subsystem
  168. [ 1.974655] regulator-dummy1.994314] NET: Registered protocol family 16
  169. [ 1.997893] DMA KiB pool for atomic coherent allocations
  170. [ 1.998771] ion_snmap to 0xe0907000 and copy to 0xc0ef01f4 (version 0.1)
  171. [ 1.9tty driver
  172. [ 2.001458] console [ttyFIQ0] enabled
  173. [ 2.002 debugger ttyFIQ0
  174. [ 2.004390] syscon 10140000.syscon: regmap0140fff] registered
  175. [ 2.004718] syscon 11000000.syscon: regm0x11000fff] registered
  176. [ 2.005061] syscon 110e0000.syscon: r00-0x110e0fff] registered
  177. [ 2.005366] syscon 11200000.syscon200000-0x112003ff] registered
  178. [ 2.005655] syscon 31020000.syx31020000-0x31022fff] registered
  179. [ 2.011249] rk_iommu 20053fEnter
  180. [ 2.011439] rk_iommu 20053f00.vop_mmu: IOVMM: Created om 0x10000000.
  181. [ 2.011464] rk_iommu 20053f00.vop_mmu: (vop) .011741] rk_iommu 20020800.vpu_m mu: (vpu) Enter
  182. [ 2.011889] _mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  183. [ 20020800.vpu_mmu: (vpu) Initialized
  184. [ 2.012153] rk_iommu 2007 Enter
  185. [ 2.012309] rk_iommu 20070800.iep_mmu: IOVMM: Createdfrom 0x10000000.
  186. [ 2.012333] rk_iommu 20070800.iep_mmu: (iep 2.012572] rk_iommu 20030480.vdec_ mmu: (vdec) Enter
  187. [ 2.0127480.vdec_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.ommu 20030480.vdec_mmu: (vdec) Initialized
  188. [ 2.022148] hw-br+1 reserved) breakpoint and 4 watchpoint registers.
  189. [ 2.0221aximum watchpoint size is 8 bytes.
  190. [ 2.022230] rockchip sip 022926] rk3368_init_rockchip_pmu_ops: could not find pmu dt node[ 2.068384] bio: create slab <bio-0> at 0
  191. [ 2.069544] Rockchip hdmi driver version 2.0
  192. [ 2.070136] vccio_1v8: 1800 mV
  193. [ 2.070501] vccio_3v3: 3300 mV
  194. [ 2.072425] SCSI subsystem initialized
  195. [ 2.072826] usbcore: registered new interface driver usbfs
  196. [ 2.072938] usbcore: registered new interface driver hub
  197. [ 2.073165] usbcore: registered new device driver usb
  198. [ 2.076045] media: Linux media interface: v0.10
  199. [ 2.076160] Linux video capture interface: v2.00
  200. [ 2.076372] pps_core: LinuxPPS API ver. 1 registered
  201. [ 2.076391] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
  202. [ 2.076434] PTP clock support registered
  203. [ 2.076517] i2c-core: driver [bq24296] using legacy suspend method
  204. [ 2.076539] i2c-core: driver [bq24296] using legacy resume method
  205. [ 2.077789] ion_heap_create: error creating heap drm type 5 base 0 size 0
  206. [ 2.078006] Rockchip ion module is successfully loaded (v1.1)
  207. [ 2.078395] Advanced Linux Sound Architecture Driver Initialized.
  208. [ 2.079256] Bluetooth: Core ver 2.16
  209. [ 2.079386] NET: Registered protocol family 31
  210. [ 2.079404] Bluetooth: HCI device and connection manager initialized
  211. [ 2.0 Bluetooth: HCI socket layer initialized
  212. [ 2.079465] Bluetoo initialized
  213. [ 2.079518] Bluetooth: SCO socket layer initial] cfg80211: Calling CRDA to up date world regulatory domain
  214. [ driver [rk816] using legacy suspend method
  215. [ 2.083044] i2c-sing legacy resume method
  216. [ 2.083102] i2c-core: driver [rk81end method
  217. [ 2.083119] i2c-core: driver [rk818] using legacy 2.084482] rockchip-i2s 100 c0000.i2s0: i2s0 has no mclk
  218. [ 2.087266] Switching to clocksource arch_sys_counter
  219. [ 2.128177] rga: Module initialized.
  220. [ 2.129114] rga2 20060000.rga: rga ion client create success!
  221. [ 2.129514] rga: Driver loaded succesfully
  222. [ 2.129861] fb disp policy is box
  223. [ 2.129901] uboot-logo-on:1
  224. [ 2.129967] rk-fb rockchip-fb: rk fb ion client create success!
  225. [ 2.129989] rk-fb rockchip-fb: rockchip framebuffer driver probe
  226. [ 2.130574] can't find screen_init node
  227. [ 2.130603] rk-screen rk_screen.14: rockchip screen probe success
  228. [ 2.132561] rk322x-lcdc 20050000.vop: vop_dev->regs=0xe0930000
  229. [ 2.132676] rk322x-lcdc vop0: can't find power_ctr node for lcdc0
  230. [ 2.133222] graphics fb0: rockchip framebuffer registerd:fb0
  231. [ 2.133936] graphics fb1: rockchip framebuffer registerd:fb1
  232. [ 2.134344] graphics fb2: rockchip framebuffer registerd:fb2
  233. [ 2.134384] ------------[ cut here ]------------
  234. [ 2.134423] WARNING: at drivers/gpio/gpiolib.c:160 gpio_ensure_requested+0x4c /0xb4()
  235. [ 2.134441] autorequest GPIO-0
  236. [ 2.134455] Modules linked in:
  237. [ 2.134483] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.10.104 #21
  238. [ 2.134533] [<c00140a8>] (unwind_backtrace+0x0/0xe0) from [<c00118e0>] (show_ stack+0x10/0x14)
  239. [ 2.134570] [<c00118e0>] (show_stack+0x10/0x14) from [<c003f360>] (warn_slowp ath_common+0x4c/0x68)
  240. [ 2.134607] [<c003f360>] (warn_slowpath_common+0x4c/0x68) from [<c003f3fc>] ( warn_slowpath_fmt+0x2c/0x3c)
  241. [ 2.134642] [<c003f3fc>] (warn_slowpath_fmt+0x2c/0x3c) from [<c02cb1b0>] (gpi o_ensure_requested+0x4c/0xb4)
  242. [ 2.134678] [<c02cb1b0>] (gpio_ensure_requested+0x4c/0xb4) from [<c02cb4cc>] (gpiod_direction_output+0x80/0x314)
  243. [ 2.134715cb4cc>] (gpiod_direction_output+0x80/0x314) from [<c05fa6b4>] (l
  244. [ 2.134751] [<c05fa6b4>] (led_resume+0x1c/0x30) from [<c0300xc/0x21c)
  245. [ 2.134785] [<c030a5b0>] (vop_pre_init+0xc/0x21c)50)
  246. [ 2.134818] [<c030c490>] (vop_open+0x2c/0x150) from [<c0c/0x64)
  247. [ 2.134852] [<c02e0ea8>] (rk_fb_open+0x5c/0x64) fromc>] (rk_fb_register+0x3f8 /0xac4) from [<c030a214>] (vop_probe+0x921] [<c030a214>] (vop_probe+0x1d8/0x270) from [<c038f960>] (pla/0x18)
  248. [ 2.134956] [<c038f960>] (platform_drv_probe+0x14/0x1 (really_probe+0xa8/0x20 c)
  249. [ 2.134991] [<c038e794>] (really_m [<c038e9f0>] (driver_probe_device+0x30/0x4 8)
  250. [ 2.135023] [probe_device+0x30/0x48) from [<c038ea68>] (__driver_attach+0x60/ [<c038ea68>] (__driver_attach+0x60/0x84) from [<c038d230>] (bus0x90)
  251. [ 2.135087] [<c038d230>] (bus_for_each_dev+0x50/0x90) us_add_driver+0xac/0x20 c)
  252. [ 2.135118] [<c038dfe4>] (bus_add_from [<c038ef4c>] (driver_register+0x9c/0xe 0)
  253. [ 2.135150] [<egister+0x9c/0xe0) from [<c00086a4>] (do_one_initcall+0x34/0xc8 )00086a4>] (do_one_initcall+0x34/0xc8) from [<c0caab30>] (do_init2.135216] [<c0c aab30>] (do_initcalls+0x70/0xa0) from [<c0caac4c>able+0xec/0x190)
  254. [ 2.135252] [<c0caac4c>] (kernel_init_freea [<c08adf50>] (kernel_init+0x8/0xe 4)
  255. [ 2.135291] [<c08adf50>4) from [<c000dba0>] (ret_from_fork+0x14/0x34)
  256. [ 2.135362] -412216a71f ]---
  257. [ 2.136518] rk322x-lcdc vop0: lcdc0: dclk:29[ 2.157686] alloc_buffer:ion_p hy_addr=0x10000000
  258. [ 2.171892] fb0:phy:10000000>>vir:e0937000>>len:0xb00000
  259. [ 2.224740] rk_iommu 20053f00.vop_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7ea4e000
  260. [ 2.224845] rk322x-lcdc vop0: lcdc0 probe ok, iommu enabled
  261. [ 2.228342] NET: Registered protocol family 2
  262. [ 2.229652] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  263. [ 2.229793] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  264. [ 2.229893] TCP: Hash tables configured (established 4096 bind 4096)
  265. [ 2.230034] TCP: reno registered
  266. [ 2.230062] UDP hash table entries: 256 (order: 1, 8192 bytes)
  267. [ 2.230108] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  268. [ 2.230499] NET: Registered protocol family 1
  269. [ 2.231149] RPC: Registered named UNIX socket transport module.
  270. [ 2.231177] RPC: Registered udp transport module.
  271. [ 2.231193] RPC: Registered tcp transport module.
  272. [ 2.231210] RPC: Registered tcp NFSv4.1 backchannel transport module.
  273. [ 2.232539] Unpacking initramfs...
  274. [ 2.364292] Freeing initrd memory: 1436K (c5bf0000 - c5d57000)
  275. [ 2.366041] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counter s available
  276. [ 2.370609] audit: initializing netlink socket (disabled)
  277. [ 2.370783] type=2000 audit(0.520:1): initialized
  278. [ 2.372344] bounce pool size: 64 pages
  279. [ 2.381722] NFS: Registering the id_resolver key type
  280. [ 2.381843] Key type id_resolver registered
  281. [ 2.381862] Key type id_legacy registered
  282. [ 2.382747] fuse init (API version 7.22)
  283. [ 2.383599] msgmni has been set to 970
  284. [ 2.384221]
  285. [ 2.384221] TEE Core Framework initialization (ver 1:0.1)
  286. [ 2.384317] TEE armv7 Driver initialization
  287. [ 2.384944] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  288. [ 2.384972] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  289. [ 2.385462] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=58)
  290. [ 2.388602] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 48)
  291. [ 2.388655] io scheduler noop registered
  292. [ 2.388673] io scheduler deadline registered
  293. [ 2.388911] io scheduler cfq registered (default)
  294. [ 2.391690] HDMI: no pull up gpio
  295. [ 2.392654] reset hdmi
  296. [ 2.392962] rockchip-hdmiv2 200a0000.hdmi: rockchip hdmiv2 probe success.
  297. [ 2.393770] iep: failed to find iep power down clock source.
  298. [ 2.394453] iep ion client create success!
  299. [ 2.394494] IEP Power ON
  300. [ 2.394940] rk_iommu 20070800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7e9db000
  301. [ 2.394962] IEP Power OFF
  302. [ 2.394988] IEP Driver loaded succesfully
  303. [ 2.395181] Module initialized.
  304. [ 2.396158] rk3036-tve 20053e00.tve: Can not read det_io
  305. [ 2.396312] rk3036-tve 20053e00.tve: rockchip,rk322x-tve tv encoder probe ok
  306. [ 2.399534] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-2364208
  307. [ 2.399593] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num _Peri-20 Num_Events-16
  308. [ 2.400256] vdd_arm: 950 <--> 1400 mV at 1100 mV
  309. [ 2.400865] vdd_logic: 1100 <--> 1300 mV at 1200 mV
  310. [ 2.401527] rk_serial.c v2.0 2017-06-30
  311. [ 2.402137] 11020000.serial: ttyS1 at MMIO 0x11020000 (irq = 88) is a rk29_se rial.1
  312. [ 2.402729] serial 11020000.serial: membase e244e000
  313. [ 2.409112] loop: module loaded
  314. [ 2.409893] zram: Created 1 device(s)
  315. [ 2.410134] i2c-core: driver [mpu6050B1] using legacy suspend method
  316. [ 2.410156] i2c-core: driver [mpu6050B1] using legacy resume method
  317. [ 2.410176] mpu_init: Probe name mpu6050B1
  318. [ 2.410473] ak8963_mod_init: Probe name ak8963_mod
  319. [ 2.412298] SCSI Media Changer driver v0.25
  320. [ 2.413051] tun: Universal TUN/TAP device driver, 1.6
  321. [ 2.413091] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  322. [ 2.413393] vmac_init.
  323. [ 2.414393] stmmac_probe_config_dt: Can not read property: pmu_regulator.
  324. [ 2.414425] stmmac_probe_config_dt: clock input/output? (output).
  325. [ 2.414444] stmmac_probe_config_dt: TX delay(0x26).
  326. [ 2.414465] stmmac_probe_config_dt: RX delay(0x11).
  327. [ 2.414482] stmmac_probe_config_dt: internal PHY/external PHY? (internal).
  328. [ 2.414660] stmmc_pltfr_init:
  329. [ 2.414708] stmmc_pltfr_init: ERROR: Get power-gpio failed.
  330. [ 2.414726] stmmc_pltfr_init: ERROR: Get reset-gpio failed.
  331. [ 2.414786] stmmc_pltfr_init: init for RMII
  332. [ 2.415108] stmmac - user ID: 0x10, Synopsys ID: 0x35
  333. [ 2.415128] Normal descriptors
  334. [ 2.415143] Ring mode enabled
  335. [ 2.415159] DMA HW capability register supported
  336. [ 2.415176] RX Checksum Offload Engine supported (type 2)
  337. [ 2.415191] TX Checksum insertion supported
  338. [ 2.415204] Wake-Up On Lan supported
  339. [ 2.415278] Enable RX Mitigation via HW Watchdog Timer
  340. [ 2.416141] PPP generic driver version 2.4.2
  341. [ 2.416531] n module registered
  342. [ 2.416555] PPP Deflate Compression modu.416599] PPP MPPE Compression module registered
  343. [ 2.416618] col family 24
  344. [ 2.416688] SLIP: version 0.8.4-NET3.019-NEWTTx=256) (6 bit encapsulation ena bled).
  345. [ 2.416707] CSLIP: codents of the University of California.
  346. [ 2.416728] Rockchip W.00) ...
  347. [ 2.416788] ======================================2.416806] ==== Launching Wi -Fi driver! (Powered by Rockchip) ============================================== ==========
  348. [ 2.41red by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
  349. [ 2.416857] dh 2.416874] ======== dhd_wlan_init_plat_data ========
  350. [ 2._gpio: GPIO(WL_REG_ON) = -1
  351. [ 2.416905] dhd_wlan_init_gpio:
  352. [ 2.416923] [WLAN_RFKILL]: rockchip_wifi_g N_RFKILL]: rockchip_wifi_get_oob_irq: rfkill-wlan driver has notd
  353. [ 2.416958] dhd_wlan_init_gpio: host_oob_irq: -1
  354. [ 2.4pio: host_oob_irq_flags=0x414
  355. [ 2.416988] dhd_wifi_platform_17034] Power-up adapter 'DHD generic adapter'
  356. [ 2.417106] wi = 1
  357. N_RFKILL]: rockchip_wifi_power: 1EG_ON(-1) HIGH! ========
  358. [ 2.417155] [WLAN_RFKILL]: rfkill-wlan driver has not Successful initialized
  359. [ 2.618760] wifi_platform_bus_enumerate device present 1
  360. [ 2.618796] ======== Card detection to detect SDIO card! ========
  361. [ 2.618817] [WLAN_RFKILL]: rockchip_wifi_power: 0
  362. [ 2.618834] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Su ccessful initialized
  363. [ 2.628695] [WLAN_RFKILL]: rockchip_wifi_power: 1
  364. [ 2.628724] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Su ccessful initialized
  365. [ 2.628743] sdio: host isn't initialization successfully.
  366. [ 4.596614] failed to power up DHD generic adapter, 0 retry left
  367. [ 4.612494] wifi_platform_set_power = 0
  368. [ 4.612526] ======== PULL WL_REG_ON(-1) LOW! ========
  369. [ 4.612544] [WLAN_RFKILL]: rockchip_wifi_power: 0
  370. [ 4.612561] [WLAN_RFKILL]: rockchip_wifi_power: rfkill-wlan driver has not Su ccessful initialized
  371. [ 4.612580] wifi_platform_bus_enumerate device present 0
  372. [ 4.612594] ======== Card detection to remove SDIO card! ========
  373. [ 4.612610] sdio: host isn't initialization successfully.
  374. [ 4.612626] failed to power up DHD generic adapter, max retry reached**
  375. [ 4.612679] unregister wifi platform drivers
  376. [ 4.612699] wifi_platform_bus_enumerate device present 0
  377. [ 4.612715] ======== Card detection to remove SDIO card! ========
  378. [ 4.612730] sdio: host isn't initialization successfully.
  379. [ 4.612745] ======== dhd_wlan_deinit_plat_data ========
  380. [ 4.612764] dhd_module_init: Failed to load the driver, try cnt 0
  381. [ 4.612816] dhd_module_init: Failed to load driver max retry reached**
  382. [ 4.612832] dhd_module_init: Exit err=-19
  383. [ 4.613006] usbcore: registered new interface driver catc
  384. [ 4.613124] usbcore: registered new interface driver kaweth
  385. [ v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  386. [ : registered new interface driver pegasus
  387. [ 4.613306] usbcorrface driver rtl8150
  388. [ 4.613380] usbcore: registered new int[ 4.613401] hso: drivers/net/usb/hs o.c: Option Wireless
  389. [ egistered new interface driver hso
  390. [ 4.613631] usbcore: regiiver asix
  391. [ 4.613721] usbcore: registered new interface driv 4.613797] usbcore: registe red new interface driver cdc_ether
  392. [: registered new interface driver cdc_eem
  393. [ 4.613941] usbcorrface driver dm9601
  394. [ 4.614014] usbcore: registered new inte[ 4.614108] usbcore: registered ne w interface driver smsc75xxregistered new interface driver smsc95xx
  395. [ 4.614286] usbcorece driver gl620a
  396. [ 4.614360] usbcore: registered new interfa 4.614434] usbcore: registered n ew interface driver plusb
  397. [ istered new interface driver rndis_host
  398. [ 4.614583] usbcore:ace driver cdc_subset
  399. [ 4.614654] usbcore: registered new in
  400. [ 4.614735] usbcore: registered new interface driver MOSCHI[ 4.614882] usb re: registered new interface driver kalmia1x1
  401. [ 4.615040] usbconterface driver ipheth
  402. [ 4.615130] usbcore: registered new ia_net
  403. [ 4.615206] usbcore: registered new interface driver c5304] usbcore: register ed new interface driver cdc_ncm
  404. [ 4.6tered new interface driver qmi_wwan
  405. [ 4.615466] usbcore: regiver cdc_mbim
  406. [ 4.615487] ehci_hcd: USB 2.0 'Enhanced' Host er
  407. [ 4.615505] ehci-platform: EHCI generic platform driver
  408. atform 30080000.ehci0: EHCI Host Controller
  409. [ 4.616143] ehcihci0: new USB bus registered, assigned bus number 1
  410. [ 4.617080000.ehci0: irq 48, io mem 0x30080000
  411. [ 4.635968] ehci-platB 2.0 started, EHCI 1.00
  412. [ 4.636136] usb usb1: New USB devicb, idProduct=0002
  413. [ 4.636161] usb usb1: New USB device strin SerialNumber=1
  414. [ 4.636184] usb usb1: Product: EHCI Host Con] usb usb1: Manufacturer: Linux 3 .10.104 ehci_hcd
  415. [ 4.636223ber: 30080000.ehci0
  416. [ 4.637180] hub 1-0:1.0: USB hub found
  417. 0:1.0: 1 port detected
  418. [ 4.637855] ehci-platform 300c0000.ehler
  419. [ 4.637917] ehci-platform 300c0000.ehci1: new USB bus res number 2
  420. [ 4.638516] ehci-platform 300c0000.ehci1: irq 51,[ 4.655698] ehci-platform 300c0000.ehci1: USB 2.0 started, EHCI 1.00
  421. [ 4.655866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  422. [ 4.655892] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
  423. [ 4.655915] usb usb2: Product: EHCI Host Controller
  424. [ 4.655935] usb usb2: Manufacturer: Linux 3.10.104 ehci_hcd
  425. [ 4.655954] usb usb2: SerialNumber: 300c0000.ehci1
  426. [ 4.656899] hub 2-0:1.0: USB hub found
  427. [ 4.656965] hub 2-0:1.0: 1 port detected
  428. [ 4.657588] ehci-platform 30100000.ehci2: EHCI Host Controller
  429. [ 4.657655] ehci-platform 30100000.ehci2: new USB bus registered, assigned bu s number 3
  430. [ 4.658289] ehci-platform 30100000.ehci2: irq 98, io mem 0x30100000
  431. [ 4.675379] ehci-platform 30100000.ehci2: USB 2.0 started, EHCI 1.00
  432. [ 4.675536] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  433. [ 4.675565] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
  434. [ 4.675587] usb usb3: Product: EHCI Host Controller
  435. [ 4.675607] usb usb3: Manufacturer: Linux 3.10.104 ehci_hcd
  436. [ 4.675627] usb usb3: SerialNumber: 30100000.ehci2
  437. [ 4.676533] hub 3-0:1.0: USB hub found
  438. [ 4.676599] hub 3-0:1.0: 1 port detected
  439. [ 4.677441] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  440. [ 4.677709] ohci-platform: OHCI generic platform driver
  441. [ 4.677939] ohci-platform 300a0000.ohci0: Generic Platform OHCI controller
  442. [ 4.677991] ohci-platform 300a0000.ohci0: new USB bus registered, assigned bu s number 4
  443. [ 4.678076] ohci-platform 300a0000.ohci0: irq 49, io mem 0x300a0000
  444. [ 4.738407] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  445. [ 4.738454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
  446. [ 4.738477] usb usb4: Product: Generic Platform OHCI controller
  447. [ 4.738498] usb usb4: Manufacturer: Linux 3.10.104 ohci_hcd
  448. [ 4.738518] usb usb4: SerialNumber: 300a0000.ohci0
  449. [ 4.739330] hub 4-0:1.0: USB hub found
  450. [ 4.739389] hub 4-0:1.0: 1 port detected
  451. [ 4.739815] ohci-platform 300e0000.ohci1: Generic Platform OHCI controller
  452. [ 4.739878] ohci-platform 300e0000.ohci1: new USB bus registered, assigned bu s number 5
  453. [ 4.739963] ohci-platform 300e0000.ohci1: irq 52, io mem 0x300e0000
  454. [ 4.797433] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  455. [ 4.797477] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
  456. [ 4.797500] usb usb5: Product: Generic Platform OHCI controller
  457. [ 4.797521] usb usb5: Manufacturer: Linux 3.10.104 ohci_hcd
  458. [ 4.797542] usb usb5: SerialNumber: 300e0000.ohci1
  459. [ 4.798324] hub 5-0:1.0: USB hub found
  460. [ 4.798369] hub 5-0:1.0: 1 port detected
  461. [ 4.798796] ohci-platform 30120000.ohci2: Generic Platform OHCI controller
  462. [ 4.798844] ohci-platform 30120000.ohci2: new USB bus registered, assigned bu s number 6
  463. [ 4.798923] ohci-platform 30120000.ohci2: irq 99, io mem 0x30120000
  464. [ 4.856471] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  465. [ 4.856518] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
  466. [ 4.856541] usb usb6: Product: Generic Platform OHCI controller
  467. [ 4.856561] usb usb6: Manufacturer: Linux 3.10.104 ohci_hcd
  468. [ 4.856581] usb usb6: SerialNumber: 30120000.ohci2
  469. [ 4.857363] hub 6-0:1.0: USB hub found
  470. [ 4.857405] hub 6-0:1.0: 1 port detected
  471. [ 4.858048] usbcore: registered new interface driver cdc_acm
  472. [ 4.858070] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters
  473. [ 4.858184] usbcore: registered new interface driver usblp
  474. [ 4.858271] usbcore: registered new interface driver cdc_wdm
  475. [ 4.858482] usbcore: registered new interface driver usb-storage
  476. [ 4.858582] usbcore: registered new interface driver ums-alauda
  477. [ 4.858661] usbcore: registered new interface driver ums-cypress
  478. [ 4.858743] usbcore: registered new interface driver ums-datafab
  479. [ 4.858819] usbcore: registered new interface driver ums_eneub6250
  480. [ 4.858890] usbcore: registered new interface driver ums-freecom
  481. [ 4.858967] gistered new interface driver ums-isd200
  482. [ 4.859039] usbcoreerface driver ums-jumpshot
  483. [ 4.859114] usbcore: registered nms-karma
  484. [ 4.859187] usbcore: registered new interface drive 4.859266] usbcore: regist ered new interface driver ums-sddr09
  485. registered new interface driver ums-sddr55
  486. [ 4.859427] usbc interface driver ums-usbat
  487. [ 4.859608] usbcore: registered usbserial
  488. [ 4.859690] usbcore: registered new interface dri
  489. [ 4.859753] usbserial: US B Serial support registered for gen usbcore: registered new interface driver opt ion
  490. [ 4.859895]al support registered for GSM modem (1-port)
  491. [ 4.860287] usbinterface driver trancevibrator
  492. [ 4.860306] usb20_otg: versi
  493. [ 4.861311] e2680040
  494. [ 4.861349] Core Release: 3.10a
  495. [g default values for core params
  496. [ 4.861661] Using Buffer DM] Periodic Transfer Interrupt Enhancement - disabl ed
  497. [ 4.861Interrupt Enhancement - disabled
  498. [ 4.861717] OTG VER PARAM: 4.861732] ^^^^^^^^^^^^^^^^^Device Mode
  499. [ 4.861755] Dedicate 4.861789] pcd_init otg_dev = ddd08080
  500. [ 4.862183] usb20_o OTG Controller
  501. [ 4.862317] usb20_otg 30040000.otg: new USB d bus number 7
  502. [ 4.862389] usb20_otg 30040000.otg: irq 55, i 4.862510] usb usb7: New USB d evice found, idVendor=1d6b, idPr62534] usb usb7: New USB device strings: Mfr=3, Product=2, Seria556] usb usb7: Product: DWC OTG Controller
  503. [ 4.862576] usb uinux 3.10.104 dwc_otg_hcd
  504. [ 4.862596] usb usb7: SerialNumber 4.863455] hub 7-0:1.0: USB hub found
  505. [ 4.863503] hub 7-0:1. 4.864053] usb20_host: version 3.10a 21-DEC-2012
  506. [ 4.866123d new interface driver xpad
  507. [ 4.866238] usbcore: registered _acecad
  508. [ 4.866333] usbcore: registered new interface driver458] usbcore: registered new interface driver gtco
  509. [ 4.86655ed new interface driver hanwang
  510. [ 4.866645] usbcore: registeriver kbtab
  511. [ 4.866772] usbcore: registered new interface dr866926] ==gsl_ts_init==
  512. [ 4.866981] ret=0
  513. [ 4.867035] i2680] using legacy suspend method
  514. [ 4.867055] i2c-core: drivecy resume method
  515. [ 4.867979] sensor_register_slave:mma8452,i sensor_register_slave:mma7660,id= 18
  516. [ 4.868026] sensor_regi,id=23
  517. [ 4.868041] [Gsensor] gsensor_init
  518. [ 4.868057] seu6880_acc,id=24
  519. [ 4.868076] sensor_register_slave:mpu6500_ac92] sensor_register_slave:bma2xx_ acc,id=26
  520. [ 4.868108] senso3,id=30
  521. [ 4.868125] sensor_register_slave:cm3217,id=51
  522. [ gister_slave:cm3218,id=52
  523. [ 4.868158] sensor_register_slave: 4.868905] .. rk pwm remotectl v1.1 init
  524. [ 4.869399] inputvices/110b0030.pwm/input/input0
  525. [ 4.869987] remotectl-pwm 11psci property in the DT.
  526. [ 4.870353] i2c /dev entries driver NEC protocol handler initialized
  527. [ 4.870822] IR RC5(x) protzed
  528. [ 4.870841] IR RC6 protocol handler initialized
  529. [ 4.col handler initialized
  530. [ 4.870871] IR Sony protocol handler870885] IR RC5 (streamzap) protocol handl er initialized
  531. [ 4.otocol handler initialized
  532. [ 4.870917] IR MCE Keyboard/mouseitialized
  533. [ 4.871245] usbcore: registered new interface driv71267] USB Video Class driv er (1.1.1)
  534. [ 4.871287] CamSys dri0, CamSys head file version: v0.13.0
  535. [ 4.871308] E:camsys_sisn't support soc: 0x32283002!
  536. [ 4.871950] not find test_pow 4.872051] i2c-core: driver [bq27320] using lega cy suspend methoc-core: driver [bq27320] using legacy resume method
  537. [ 4.8736robe,line=384
  538. [ 4.874334] tsadc 11150000.tsadc: Missing tsad
  539. [ 4.931156] tsadc 11150000.t sadc: initialized
  540. [ 4.932200] device-mapper: uevent: version 1.0.3
  541. [ 4.932803] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-d evel@redhat.com
  542. [ 4.933331] Bluetooth: HCI UART driver ver 2.2
  543. [ 4.933356] Bluetooth: HCI H4 protocol initialized
  544. [ 4.933374] Bluetooth: HCILL protocol initialized
  545. [ 4.933390] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
  546. [ 4.933407] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1. 2
  547. [ 4.933423] rtk_btusb: Register usb char device interface for BT driver
  548. [ 4.933865] usbcore: registered new interface driver rtk_btusb
  549. [ 4.934329] cpufreq version 1.0, suspend freq 1008 MHz
  550. [ 4.934912] cpuidle: using governor ladder
  551. [ 4.934936] cpuidle: using governor menu
  552. [ 4.935014] Synopsys Designware Multimedia Card Interface Driver
  553. [ 4.935031] MHSC version = Ver 2.00 2015-06-10
  554. [ 4.935614] dwmmc_rockchip 30020000.rksdmmc: Version ID is 270a
  555. [ 4.935730] dwmmc_rockchip 30020000.rksdmmc: failed to get hpclk_mmc
  556. [ 4.936235] dwmmc_rockchip 30020000.rksdmmc: Using internal DMA controller.
  557. [ 4.936658] dwmmc_rockchip 30020000.rksdmmc: dw_mci_init_slot: fmin=400000, f max=100000000 [mmc0]
  558. [ 4.950914] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800 000Hz for init[mmc0]
  559. [ 4.960779] dwc_otg_hcd_suspend, usb device mode
  560. [ 4.970624] dwmmc_rockchip 30020000.rksdmmc: DW MMC controller at irq 46, 32 bit h▒
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!