acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
Correcting Natoma config for non-SMP
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
pci0: <network, ethernet> at device 3.0 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <network, ethernet> at device 5.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf00a4000-0xf00a43ff irq 10 at device 6.0 on pci0
usb1: EHCI version 1.0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
pci0: <network, ethernet> at device 16.0 (no driver attached)
pci0: <network, ethernet> at device 17.0 (no driver attached)
pci0: <unknown> at device 18.0 (no driver attached)
pci0: <unknown> at device 19.0 (no driver attached)
pci0: <old, non-VGA display device> at device 20.0 (no driver attached)
cpu0: <ACPI CPU> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x90 on acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc0fff,0xc1000-0xc17ff,0xc1800-0xc1fff on isa0
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Initializing product: 157 ..

Setting Serial ID!!!
Timecounter "TSC" frequency 1500014344 Hz quality 800
Loading the NETPFE fc module
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
ad0: 512MB <QEMU HARDDISK 0.12.1> at ata0-master WDMA2
ad1: 4096MB <QEMU HARDDISK 0.12.1> at ata0-slave WDMA2
ad2: 512MB <QEMU HARDDISK 0.12.1> at ata1-master WDMA2
ad3: 1024MB <QEMU HARDDISK 0.12.1> at ata1-slave WDMA2
Kernel thread "kdm_kdb" (pid 50) exited prematurely.
Kernel thread "wkupdaemon" (pid 51) exited prematurely.
Trying to mount root from ufs:/dev/ad0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...

Verified manifest signed by PackageProduction_13_2_0
Verified jboot signed by PackageProduction_13_2_0
Verified jbase-dc-re-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jkernel package on /dev/md1...
Verified manifest signed by PackageProduction_13_2_0
Verified jkernel-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jpfe package on /dev/md2...
Verified manifest signed by PackageProduction_13_2_0
Verified jpfe-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jdocs package on /dev/md3...
Verified manifest signed by PackageProduction_13_2_0
Verified jdocs-dc-re-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jroute package on /dev/md4...
Verified manifest signed by PackageProduction_13_2_0
Verified jroute-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jcrypto package on /dev/md5...
Verified manifest signed by PackageProduction_13_2_0
Verified jcrypto-dc-re-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jswitch package on /dev/md6...
Verified manifest signed by PackageProduction_13_2_0
Verified jswitch-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted py-base-i386 package on /dev/md7...
Verified manifest signed by PackageProduction_13_2_0
Verified py-base-i386-13.2X51-D15.5 signed by PackageProduction_13_2_0
swapon: adding /dev/ad1s1b as swap device
Detected VM data disk
** /dev/ad1s1f
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
501 files, 852 used, 246793 free (81 frags, 30839 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
Checking sanity of /var [ /dev/ad1s1f ] ... done (full)
Disabling soft update on /var [ /dev/ad1s1f ] ... done
Checking sanity of /config [ /dev/ad2s1e ] ... done (full)
Disabling soft update on /config [ /dev/ad2s1e ] ... done
Checking sanity of / [ /dev/ad0s1a ] ... done (full)
Disabling soft update on / [ /dev/ad0s1a ] ... done
Checking sanity of /var/log [ /dev/ad1s1a ] ... done (full)
Disabling soft update on /var/log [ /dev/ad1s1a ] ... done
Checking sanity of /var/tmp [ /dev/ad1s1d ] ... done (full)
Disabling soft update on /var/tmp [ /dev/ad1s1d ] ... done
Automatic reboot in progress...
** /dev/ad2s1e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 257850 free (18 frags, 32229 blocks, 0.0% fragmentation)
** /dev/ad1s1f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 246789 free (85 frags, 30838 blocks, 0.0% fragmentation)
** /dev/ad1s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 118991 free (55 frags, 14867 blocks, 0.0% fragmentation)
** /dev/ad1s1d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 1011171 free (51 frags, 126390 blocks, 0.0% fragmentation)
** /dev/ad1s1e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 247641 free (25 frags, 30952 blocks, 0.0% fragmentation)
** /dev/ad1s1f (NO WRITE)
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
503 files, 856 used, 246789 free (85 frags, 30838 blocks, 0.0% fragmentation)
** /dev/ad1s1g
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 123768 free (24 frags, 15468 blocks, 0.0% fragmentation)
Mount var partitions...
** /dev/ad3s1
** Last Mounted on /user
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
2 files, 2 used, 515205 free (21 frags, 64398 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
kern.timecounter.hardware: ACPI-safe -> TSC
fxbcm0: <FX TOR BCM> mem 0xf0100000-0xf013ffff irq 10 at device 17.0 on pci0
fxbcm0: fxbcm: registers at 0xff70f000
fpga driver loaded, 0 (null)
fxcb_fpga0: <FXCB FPGA> mem 0xf0140000-0xf017ffff,0xf0180000-0xf01bffff irq 10 at device 18.0 on pci0
fxcb_fpga0: fxcb_fpga: registers at 0xff74f000
fxcb_fpga1: <FXCB FPGA> mem 0xf01c0000-0xf01fffff,0xf0200000-0xf023ffff irq 11 at device 19.0 on pci0
fxcb_fpga1: fxcb_fpga_bd: registers at 0xff78f000
fx_scpld0 on fxcb_fpga1

host-dev module loadedhgcommdev0 iomem 0xfed60000-0xfed60fff on acpi0
hgcommdev_attach: hgcommdev_vm_addr 0xff7cf000
Creating initial configuration...mgd: commit complete
Setting initial options:  debugger_on_panic=NO debugger_on_break=YES.
Starting optional daemons:  kdmmachdep.do_minidump: 1 -> 1
kernel dumps on /dev/ad1s1b
Check for coredumps
savecore: Reboot reason(s): 0x400: bios auto recovery reset
savecore: Reboot reason(s): 0x400: bios auto recovery reset
savecore: no dumps found
.
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/dev;/modules/platform;/modules;
 re_fpga kld
re-fpga module loadednot a LPC device id
kld netpfe drv: ifpfed_eia530 ifpfed_eth ifpfed_irb ifpfed_lt ifpfed_ppeer ifpfed_svcs ifpfed_vtkld platform: bcm bcmxxx dc_ifpfeLoading the DC Platform NETPFE module
 fdcsio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
fdc1: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc1: does not respond
device_attach: fdc1 attach returned 6
 if_bge if_emem0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc080-0xc0ff mem 0xf0000000-0xf001ffff,0xf0020000-0xf0023fff irq 11 at device 3.0 on pci0
em0: Memory Access and/or Bus Master bits were not set!
em2: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc100-0xc13f mem 0xf0040000-0xf005ffff irq 11 at device 4.0 on pci0
em2: Memory Access and/or Bus Master bits were not set!
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc180-0xc1ff mem 0xf0080000-0xf009ffff,0xf00a0000-0xf00a3fff irq 11 at device 5.0 on pci0
em1: Memory Access and/or Bus Master bits were not set!
em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc200-0xc23f mem 0xf00c0000-0xf00dffff irq 11 at device 16.0 on pci0
em3: Memory Access and/or Bus Master bits were not set!
bme1: bus=0, device=16, func=0, Ethernet address 4c:96:14:f2:52:d1
em1: bus=0, device=5, func=0, Ethernet address 4c:96:14:f2:52:d9
em2: bus=0, device=4, func=0, Ethernet address 4c:96:14:f2:52:d0
em0: bus=0, device=3, func=0, Ethernet address 4c:96:14:f2:52:d8
 if_vcp ixgbekld platform devices: fchipkld peertype: peertype_fxpc peertype_hcm peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
 ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
machdep.bootsuccess: 0 -> 0
setting ldconfig path: /usr/lib /opt/lib
ldconfig: /usr/lib: ignoring directory not owned by root
ldconfig: /opt/lib: ignoring directory not owned by root
starting standard daemons: cron.
Initial rc.i386 initialization: microcode kld.
 (hd0,0): Filesystem type is ext2fs, partition type 0x83
▒root='/dev/ram0'
rootfs=''
fstype='ramfs'
initdebug=''
NEWROOT='/sysroot'
hub 1-1:1.0: over-current change on port 1
hub 1-1:1.0: over-current change on port 3
hub 1-1:1.0: over-current change on port 5
Unpacking root filesystem....
803589 blocks
Mounted root filesystem on /dev/ram0
Switching to newStarting udev: [  OK  ]
SeaBIOS (version seabios-0.6.1.2-19.el6)



gPXE (http://etherboot.org) - 00:04.0 C100 PCI2.10 PnP BBS PMM7A00@10 C100




gPXE (http://etherboot.org) - 00:10.0 C180 PCI2.10 PnP BBS PMM79E0@20 C180


Booting from Hard Disk...
Loading /boot/loader
Consoles: serial port
BIOS drive C: is disk0
BIOS drive D: is disk1
BIOS drive E: is disk2
BIOS drive F: is disk3
BIOS 638kB/1999860kB available memory

FreeBSD/i386 bootstrap loader, Revision 1.2
(builder@svl-junos-pool92.juniper.net, Thu Mar  6 07:44:21 UTC 2014)
Loading /boot/defaults/loader.conf
/kernel text=0x9614b8 data=0x6726c+0x1138ce0 syms=[0x4+0xa7c80+0x4+0xf7896]
/boot/modules/if_bge.ko text=0xda70 data=0x360+0x80 syms=[0x4+0xdd0+0x4+0xd8a]
/boot/modules/mpt_core.ko text=0x18d9c data=0x488+0x358
/boot/modules/if_bce.ko text=0xd3b8 data=0x16db8+0x24e4 syms=[0x4+0x1550+0x4+0x17ee]
/boot/modules/acb.ko text=0x6dfc data=0x3c4+0x148 syms=[0x4+0xfc0+0x4+0x1042]
/boot/modules/mcs.ko text=0x4c48 data=0x390+0xec syms=[0x4+0xc00+0x4+0xb81]
/boot/modules/scs.ko text=0x7950 data=0x564+0x184 syms=[0x4+0x10d0+0x4+0x1138]
/boot/modules/rcb.ko text=0x2a84 data=0x184+0x38 syms=[0x4+0x7e0+0x4+0x713]
/boot/modules/cb.ko text=0x68b0 data=0x3a4+0x11c syms=[0x4+0xf00+0x4+0xe4f]
/boot/modules/mesw.ko text=0x636c data=0x344+0x78 syms=[0x4+0xbf0+0x4+0xede]
/boot/modules/cbd.ko text=0x1f48 data=0x98+0xc syms=[0x4+0x510+0x4+0x407]
/boot/modules/sfccb.ko text=0x1168 data=0x1c8+0x20 syms=[0x4+0x5e0+0x4+0x55b]
/boot/modules/sngcb.ko text=0xfe0 data=0x1d0+0x20 syms=[0x4+0x5b0+0x4+0x510]


Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
|
Serial Number: TA3713430048
Product Name: 0BCD
Version: 02 06 REV 06
Board Version: 2GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb kdm
KDB: current backend: ddb
Copyright (c) 1996-2014, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 13.2X51-D15.5 #0: 2014-03-06 10:05:33 UTC
    builder@svl-junos-pool92.juniper.net:/volume/build/junos/13.2/service/13.2X51-D15.5/obj-i386/junos/bsd/kernels/JUNIPER-QFX/kernel
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Xeon E312xx (Sandy Bridge) (1500.01-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a1  Stepping = 1
  Features=0x783f3fd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2>
  Features2=0x96b82203<SSE3,<b1>,SSSE3,CX16,SSE4.1,SSE4.2,x2APIC,POPCNT,<b25>,XSAVE,<b28>,<b31>>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
real memory  = 2048917504 (1954 MB)
avail memory = 1975627776 (1884 MB)
ACPI APIC Table: <BOCHS  BXPCAPIC>
pnpbios: Bad PnP BIOS data checksum
Security policy loaded: Junos MAC/veriexec (mac_veriexec)
MAC/veriexec fingerprint module loaded: SHA1
MAC/veriexec fingerprint module loaded: SHA256
ioapic0: Changing APIC ID to 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ETHERNET SOCKET BRIDGE initialising
Initializing DCF X86 platform properties ..
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
Correcting Natoma config for non-SMP
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
pci0: <network, ethernet> at device 3.0 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <network, ethernet> at device 5.0 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf00a4000-0xf00a43ff irq 10 at device 6.0 on pci0
usb1: EHCI version 1.0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub2: 6 ports with 6 removable, self powered
pci0: <network, ethernet> at device 16.0 (no driver attached)
pci0: <network, ethernet> at device 17.0 (no driver attached)
pci0: <unknown> at device 18.0 (no driver attached)
pci0: <unknown> at device 19.0 (no driver attached)
pci0: <old, non-VGA display device> at device 20.0 (no driver attached)
cpu0: <ACPI CPU> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x90 on acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc0fff,0xc1000-0xc17ff,0xc1800-0xc1fff on isa0
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Initializing product: 157 ..

Setting Serial ID!!!
Timecounter "TSC" frequency 1500008680 Hz quality 800
Loading the NETPFE fc module
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
ad0: 512MB <QEMU HARDDISK 0.12.1> at ata0-master WDMA2
ad1: 4096MB <QEMU HARDDISK 0.12.1> at ata0-slave WDMA2
ad2: 512MB <QEMU HARDDISK 0.12.1> at ata1-master WDMA2
ad3: 1024MB <QEMU HARDDISK 0.12.1> at ata1-slave WDMA2
Kernel thread "kdm_kdb" (pid 50) exited prematurely.
Kernel thread "wkupdaemon" (pid 51) exited prematurely.
Trying to mount root from ufs:/dev/ad0s1a
Attaching /packages/jbase via /dev/mdctl...
Mounted jbase package on /dev/md0...

Verified manifest signed by PackageProduction_13_2_0
Verified jboot signed by PackageProduction_13_2_0
Verified jbase-dc-re-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jkernel package on /dev/md1...
Verified manifest signed by PackageProduction_13_2_0
Verified jkernel-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jpfe package on /dev/md2...
Verified manifest signed by PackageProduction_13_2_0
Verified jpfe-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jdocs package on /dev/md3...
Verified manifest signed by PackageProduction_13_2_0
Verified jdocs-dc-re-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jroute package on /dev/md4...
Verified manifest signed by PackageProduction_13_2_0
Verified jroute-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jcrypto package on /dev/md5...
Verified manifest signed by PackageProduction_13_2_0
Verified jcrypto-dc-re-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted jswitch package on /dev/md6...
Verified manifest signed by PackageProduction_13_2_0
Verified jswitch-qfx-x86-32-13.2X51-D15.5 signed by PackageProduction_13_2_0
Mounted py-base-i386 package on /dev/md7...
Verified manifest signed by PackageProduction_13_2_0
Verified py-base-i386-13.2X51-D15.5 signed by PackageProduction_13_2_0
swapon: adding /dev/ad1s1b as swap device
Detected VM data disk
** /dev/ad1s1f
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
503 files, 849 used, 246796 free (92 frags, 30838 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
Checking sanity of /var [ /dev/ad1s1f ] ... done (full)
Disabling soft update on /var [ /dev/ad1s1f ] ... done
Checking sanity of /config [ /dev/ad2s1e ] ... done (full)
Disabling soft update on /config [ /dev/ad2s1e ] ... done
Checking sanity of / [ /dev/ad0s1a ] ... done (full)
Disabling soft update on / [ /dev/ad0s1a ] ... done
Checking sanity of /var/log [ /dev/ad1s1a ] ... done (full)
Disabling soft update on /var/log [ /dev/ad1s1a ] ... done
Checking sanity of /var/tmp [ /dev/ad1s1d ] ... done (full)
Disabling soft update on /var/tmp [ /dev/ad1s1d ] ... done
Automatic reboot in progress...
** /dev/ad2s1e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 257850 free (18 frags, 32229 blocks, 0.0% fragmentation)
** /dev/ad1s1f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 246792 free (96 frags, 30837 blocks, 0.0% fragmentation)
** /dev/ad1s1a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 118863 free (71 frags, 14849 blocks, 0.1% fragmentation)
** /dev/ad1s1d
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 1011171 free (51 frags, 126390 blocks, 0.0% fragmentation)
** /dev/ad1s1e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 247641 free (25 frags, 30952 blocks, 0.0% fragmentation)
** /dev/ad1s1f (NO WRITE)
** Last Mounted on /var
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
505 files, 853 used, 246792 free (96 frags, 30837 blocks, 0.0% fragmentation)
** /dev/ad1s1g
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 123768 free (24 frags, 15468 blocks, 0.0% fragmentation)
Mount var partitions...
** /dev/ad3s1
** Last Mounted on /user
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
2 files, 2 used, 515205 free (21 frags, 64398 blocks, 0.0% fragmentation)

***** FILE SYSTEM MARKED CLEAN *****
kern.timecounter.hardware: ACPI-safe -> TSC
fxbcm0: <FX TOR BCM> mem 0xf0100000-0xf013ffff irq 10 at device 17.0 on pci0
fxbcm0: fxbcm: registers at 0xff70f000
fpga driver loaded, 0 (null)
fxcb_fpga0: <FXCB FPGA> mem 0xf0140000-0xf017ffff,0xf0180000-0xf01bffff irq 10 at device 18.0 on pci0
fxcb_fpga0: fxcb_fpga: registers at 0xff74f000
fxcb_fpga1: <FXCB FPGA> mem 0xf01c0000-0xf01fffff,0xf0200000-0xf023ffff irq 11 at device 19.0 on pci0
fxcb_fpga1: fxcb_fpga_bd: registers at 0xff78f000
fx_scpld0 on fxcb_fpga1

host-dev module loadedhgcommdev0 iomem 0xfed60000-0xfed60fff on acpi0
hgcommdev_attach: hgcommdev_vm_addr 0xff7cf000
Creating initial configuration...mgd: commit complete
Setting initial options:  debugger_on_panic=NO debugger_on_break=YES.
Starting optional daemons:  kdmmachdep.do_minidump: 1 -> 1
kernel dumps on /dev/ad1s1b
Check for coredumps
savecore: Reboot reason(s): 0x400: bios auto recovery reset
savecore: Reboot reason(s): 0x400: bios auto recovery reset
savecore: no dumps found
.
Doing initial network setup:
.
Initial interface configuration:
additional daemons:.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/peertype;/modules/ifpfe_drv;/modules/dev;/modules/platform;/modules;
 re_fpga kld
re-fpga module loadednot a LPC device id
kld netpfe drv: ifpfed_eia530 ifpfed_eth ifpfed_irb ifpfed_lt ifpfed_ppeer ifpfed_svcs ifpfed_vtkld platform: bcm bcmxxx dc_ifpfeLoading the DC Platform NETPFE module
 fdcsio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0x400
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
fdc1: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc1: does not respond
device_attach: fdc1 attach returned 6
 if_bge if_emem0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc080-0xc0ff mem 0xf0000000-0xf001ffff,0xf0020000-0xf0023fff irq 11 at device 3.0 on pci0
em0: Memory Access and/or Bus Master bits were not set!
em2: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc100-0xc13f mem 0xf0040000-0xf005ffff irq 11 at device 4.0 on pci0
em2: Memory Access and/or Bus Master bits were not set!
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc180-0xc1ff mem 0xf0080000-0xf009ffff,0xf00a0000-0xf00a3fff irq 11 at device 5.0 on pci0
em1: Memory Access and/or Bus Master bits were not set!
em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc200-0xc23f mem 0xf00c0000-0xf00dffff irq 11 at device 16.0 on pci0
em3: Memory Access and/or Bus Master bits were not set!
bme1: bus=0, device=16, func=0, Ethernet address 4c:96:14:f2:52:d1
em1: bus=0, device=5, func=0, Ethernet address 4c:96:14:f2:52:d9
em2: bus=0, device=4, func=0, Ethernet address 4c:96:14:f2:52:d0
em0: bus=0, device=3, func=0, Ethernet address 4c:96:14:f2:52:d8
 if_vcp ixgbekld platform devices: fchipkld peertype: peertype_fxpc peertype_hcm peertype_sfi peertype_slavere grat_arp_on_ifup=YES: net.link.ether.inet.grat_arp_on_ifup: 1 -> 1
 ipsec kld.
Doing additional network setup:.
Starting final network daemons:.
machdep.bootsuccess: 0 -> 0
setting ldconfig path: /usr/lib /opt/lib
ldconfig: /usr/lib: ignoring directory not owned by root
ldconfig: /opt/lib: ignoring directory not owned by root
starting standard daemons: cron.
Initial rc.i386 initialization: microcode kld.

 Lock Manager
RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com
Copyright (c) 1992-2006 Birdstep Technology, Inc.  All Rights Reserved.

Unix Domain sockets Lock manager
Lock manager 'lockmgr' started successfully.

Database Initialization Utility
RDM Embedded 7 [04-Aug-2006] http://www.birdstep.com
Copyright (c) 1992-2006 Birdstep Technology, Inc.  All Rights Reserved.

/var/pdb/profile_db initialized

Profile database initialized
Local package initialization: kdmmachdep.do_minidump: 1 -> 1
kernel dumps on /dev/ad1s1b
Check for coredumps
savecore: Reboot reason(s): 0x400: bios auto recovery reset
savecore: Reboot reason(s): 0x400: bios auto recovery reset
savecore: no dumps found
.
kern.securelevel: -1 -> 1
starting local daemons:set cores for group access
Running /packages/finish.install ...
rm: /packages/finish.install: Read-only file system
.
Fri Jul 19 16:16:45 UTC 2019

Amnesiac (ttyd0)

login: