API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 30th, 2023
83
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.50 KB | None | 0 0
raw download clone embed print report
  1. NAND read: device 0 offset 0x1080000, size 0x600000
  2. 6291456 bytes read: OK
  3. ## Loading kernel from FIT Image at 44000000 ...
  4. Using 'config@1' configuration
  5. Trying 'kernel-1' kernel subimage
  6. Description: ARM64 OpenWrt Linux-6.1.52
  7. Type: Kernel Image
  8. Compression: gzip compressed
  9. Data Start: 0x440000e8
  10. Data Size: 4857969 Bytes = 4.6 MiB
  11. Architecture: AArch64
  12. OS: Linux
  13. Load Address: 0x41000000
  14. Entry Point: 0x41000000
  15. Hash algo: crc32
  16. Hash value: ac04e551
  17. Hash algo: sha1
  18. Hash value: 4a46c540724e05ed93560b3f5f2055cfbcd4fd60
  19. Verifying Hash Integrity ... crc32+ sha1+ OK
  20. ## Loading fdt from FIT Image at 44000000 ...
  21. Using 'config@1' configuration
  22. Trying 'fdt-1' fdt subimage
  23. Description: ARM64 OpenWrt linksys_mx4200v1 device tree blob
  24. Type: Flat Device Tree
  25. Compression: uncompressed
  26. Data Start: 0x444a229c
  27. Data Size: 44157 Bytes = 43.1 KiB
  28. Architecture: AArch64
  29. Hash algo: crc32
  30. Hash value: f3c13eda
  31. Hash algo: sha1
  32. Hash value: cdb7b255025f211a2f0433cecb2ad91f31e0cb52
  33. Verifying Hash Integrity ... crc32+ sha1+ OK
  34. Booting using the fdt blob at 0x444a229c
  35. Uncompressing Kernel Image ... OK
  36. Loading Device Tree to 4a3f2000, end 4a3ffc7c ... OK
  37. Using machid 0x801000d from environment
  38.  
  39. Starting kernel ...
  40.  
  41. Jumping to AARCH64 kernel via monitor
  42. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  43. [ 0.000000] Linux version 6.1.52 (spectre@android-vm) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23901-f845368c28) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Sat Sep 30 08:21:41 2023
  44. [ 0.000000] Machine model: Linksys MX4200v1
  45. [ 0.000000] Zone ranges:
  46. [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
  47. [ 0.000000] DMA32 empty
  48. [ 0.000000] Normal empty
  49. [ 0.000000] Movable zone start for each node
  50. [ 0.000000] Early memory node ranges
  51. [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000040ffffff]
  52. [ 0.000000] node 0: [mem 0x0000000041000000-0x000000004a3fffff]
  53. [ 0.000000] node 0: [mem 0x000000004a400000-0x00000000510fffff]
  54. [ 0.000000] node 0: [mem 0x0000000051100000-0x000000005fffffff]
  55. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
  56. [ 0.000000] psci: probing for conduit method from DT.
  57. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  58. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  59. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  60. [ 0.000000] psci: SMC Calling Convention v1.0
  61. [ 0.000000] percpu: Embedded 17 pages/cpu s31080 r8192 d30360 u69632
  62. [ 0.000000] Detected VIPT I-cache on CPU0
  63. [ 0.000000] alternatives: applying boot alternatives
  64. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
  65. [ 0.000000] Kernel command line: ubi.mtd=alt_rootfs ubi.block=0,alt_rootfs root=/dev/ubiblock0_1 rootfstype=squashfs rootwait ro ubi.block=0,1 root=/dev/ubiblock0_1
  66. [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  67. [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  68. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  69. [ 0.000000] Memory: 373360K/524288K available (7744K kernel code, 854K rwdata, 2296K rodata, 1280K init, 273K bss, 150928K reserved, 0K cma-reserved)
  70. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  71. [ 0.000000] rcu: Hierarchical RCU implementation.
  72. [ 0.000000] Tracing variant of Tasks RCU enabled.
  73. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  74. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  75. [ 0.000000] Root IRQ handler: gic_handle_irq
  76. [ 0.000000] GICv2m: range[mem 0x0b00a000-0x0b00affc], SPI[448:479]
  77. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  78. [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  79. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  80. [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  81. [ 0.000098] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  82. [ 0.000112] pid_max: default: 32768 minimum: 301
  83. [ 0.000577] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  84. [ 0.000590] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  85. [ 0.002410] cblist_init_generic: Setting adjustable number of callback queues.
  86. [ 0.002418] cblist_init_generic: Setting shift to 2 and lim to 1.
  87. [ 0.002615] rcu: Hierarchical SRCU implementation.
  88. [ 0.002619] rcu: Max phase no-delay instances is 1000.
  89. [ 0.003403] smp: Bringing up secondary CPUs ...
  90. [ 0.004054] Detected VIPT I-cache on CPU1
  91. [ 0.004187] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  92. [ 0.004843] Detected VIPT I-cache on CPU2
  93. [ 0.004943] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  94. [ 0.005559] Detected VIPT I-cache on CPU3
  95. [ 0.005652] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  96. [ 0.005720] smp: Brought up 1 node, 4 CPUs
  97. [ 0.005728] SMP: Total of 4 processors activated.
  98. [ 0.005733] CPU features: detected: 32-bit EL0 Support
  99. [ 0.005738] CPU features: detected: CRC32 instructions
  100. [ 0.005799] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  101. [ 0.005805] CPU: All CPU(s) started at EL1
  102. [ 0.005808] alternatives: applying system-wide alternatives
  103. [ 0.016408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  104. [ 0.016436] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  105. [ 0.016651] pinctrl core: initialized pinctrl subsystem
  106. [ 0.017800] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  107. [ 0.018365] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  108. [ 0.018407] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  109. [ 0.018456] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  110. [ 0.018850] thermal_sys: Registered thermal governor 'step_wise'
  111. [ 0.019033] cpuidle: using governor menu
  112. [ 0.019333] ASID allocator initialised with 65536 entries
  113. [ 0.072740] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  114. [ 0.081108] SCSI subsystem initialized
  115. [ 0.081297] usbcore: registered new interface driver usbfs
  116. [ 0.081350] usbcore: registered new interface driver hub
  117. [ 0.081383] usbcore: registered new device driver usb
  118. [ 0.081806] qcom_scm: convention: smc arm 64
  119. [ 0.083106] clocksource: Switched to clocksource arch_sys_counter
  120. [ 0.084205] NET: Registered PF_INET protocol family
  121. [ 0.084336] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  122. [ 0.085188] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
  123. [ 0.085208] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  124. [ 0.085221] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
  125. [ 0.085271] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
  126. [ 0.085412] TCP: Hash tables configured (established 4096 bind 4096)
  127. [ 0.085496] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  128. [ 0.085543] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  129. [ 0.085740] NET: Registered PF_UNIX/PF_LOCAL protocol family
  130. [ 0.085776] PCI: CLS 0 bytes, default 64
  131. [ 0.087064] workingset: timestamp_bits=46 max_order=17 bucket_order=0
  132. [ 0.092127] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  133. [ 0.092140] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  134. [ 0.094803] qcom-qmp-usb-phy 78000.phy: supply vdda-phy not found, using dummy regulator
  135. [ 0.094972] qcom-qmp-usb-phy 78000.phy: supply vdda-pll not found, using dummy regulator
  136. [ 0.096584] qcom-qusb2-phy 79000.phy: supply vdd not found, using dummy regulator
  137. [ 0.096751] qcom-qusb2-phy 79000.phy: supply vdda-pll not found, using dummy regulator
  138. [ 0.096808] qcom-qusb2-phy 79000.phy: supply vdda-phy-dpdm not found, using dummy regulator
  139. [ 0.096973] qcom-qusb2-phy 79000.phy: Registered Qcom-QUSB2 phy
  140. [ 0.101307] bam-dma-engine 704000.dma-controller: num-channels unspecified in dt
  141. [ 0.101322] bam-dma-engine 704000.dma-controller: num-ees unspecified in dt
  142. [ 0.105827] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  143. [ 0.106465] msm_serial 78b3000.serial: msm_serial: detected port #0
  144. [ 0.106500] msm_serial 78b3000.serial: uartclk = 3686400
  145. [ 0.106607] 78b3000.serial: ttyMSM0 at MMIO 0x78b3000 (irq = 20, base_baud = 230400) is a MSM
  146. [ 0.106636] msm_serial: console setup on port #0
  147. [ 0.765313] printk: console [ttyMSM0] enabled
  148. [ 0.770445] msm_serial: driver initialized
  149. [ 0.779399] loop: module loaded
  150. [ 0.780866] nand: device found, Manufacturer ID: 0xad, Chip ID: 0xac
  151. [ 0.781356] nand: Hynix H27S4G8F2EDA-BC
  152. [ 0.787966] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
  153. [ 0.791890] 29 fixed-partitions partitions found on MTD device qcom_nand.0
  154. [ 0.799183] Creating 29 MTD partitions on "qcom_nand.0":
  155. [ 0.806141] 0x000000000000-0x000000100000 : "0:sbl1"
  156. [ 0.813102] 0x000000100000-0x000000200000 : "0:mibib"
  157. [ 0.817930] 0x000000200000-0x000000280000 : "0:bootconfig"
  158. [ 0.822399] 0x000000280000-0x000000300000 : "0:bootconfig1"
  159. [ 0.827862] 0x000000300000-0x000000600000 : "0:qsee"
  160. [ 0.835727] 0x000000600000-0x000000900000 : "0:qsee_1"
  161. [ 0.840819] 0x000000900000-0x000000980000 : "0:devcfg"
  162. [ 0.843431] 0x000000980000-0x000000a00000 : "0:devcfg_1"
  163. [ 0.848557] 0x000000a00000-0x000000a80000 : "0:apdp"
  164. [ 0.854004] 0x000000a80000-0x000000b00000 : "0:apdp_1"
  165. [ 0.858948] 0x000000b00000-0x000000b80000 : "0:rpm"
  166. [ 0.863974] 0x000000b80000-0x000000c00000 : "0:rpm_1"
  167. [ 0.868693] 0x000000c00000-0x000000c80000 : "0:cdt"
  168. [ 0.873920] 0x000000c80000-0x000000d00000 : "0:cdt_1"
  169. [ 0.878580] 0x000000d00000-0x000000d80000 : "0:appsblenv"
  170. [ 0.883805] 0x000000d80000-0x000000e80000 : "0:appsbl"
  171. [ 0.889677] 0x000000e80000-0x000000f80000 : "0:appsbl_1"
  172. [ 0.894723] 0x000000f80000-0x000001000000 : "0:art"
  173. [ 0.899722] 0x000001000000-0x000001040000 : "u_env"
  174. [ 0.904106] 0x000001040000-0x000001060000 : "s_env"
  175. [ 0.908752] 0x000001060000-0x000001080000 : "devinfo"
  176. [ 0.913743] 0x000001080000-0x00000a680000 : "kernel"
  177. [ 1.062056] 0x000001680000-0x00000a680000 : "rootfs"
  178. [ 1.199697] mtd: setting mtd22 (rootfs) as root device
  179. [ 1.200053] mtdsplit: no squashfs found in "rootfs"
  180. [ 1.203763] 0x00000a680000-0x000013c80000 : "alt_kernel"
  181. [ 1.352054] 0x00000ac80000-0x000013c80000 : "alt_rootfs"
  182. [ 1.489825] 0x000013c80000-0x000013e80000 : "sysdiag"
  183. [ 1.492210] 0x000013e80000-0x000013f00000 : "0:ethphyfw"
  184. [ 1.494794] 0x000013f00000-0x00001f700000 : "syscfg"
  185. [ 1.677060] 0x00001f700000-0x000020000000 : "0:wififw"
  186. [ 1.695672] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
  187. [ 1.715420] i2c_dev: i2c /dev entries driver
  188. [ 1.722144] sdhci: Secure Digital Host Controller Interface driver
  189. [ 1.722188] sdhci: Copyright(c) Pierre Ossman
  190. [ 1.727274] sdhci-pltfm: SDHCI platform and OF driver helper
  191. [ 1.733155] remoteproc remoteproc0: releasing cd00000.q6v5_wcss
  192. [ 1.739968] NET: Registered PF_INET6 protocol family
  193. [ 1.744037] Segment Routing with IPv6
  194. [ 1.748252] In-situ OAM (IOAM) with IPv6
  195. [ 1.751848] NET: Registered PF_PACKET protocol family
  196. [ 1.755861] 8021q: 802.1Q VLAN Support v1.8
  197. [ 1.780288] qcom,cpr4-apss-regulator b018000.cpr4-ctrl: CPR valid fuse count: 4
  198. [ 1.780627] cpr4_ipq807x_apss_read_fuse_data: apc_corner: speed bin = 0
  199. [ 1.786590] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR fusing revision = 1
  200. [ 1.793014] cpr4_ipq807x_apss_read_fuse_data: apc_corner: CPR misc fuse value = 0
  201. [ 1.800687] cpr4_ipq807x_apss_read_fuse_data: apc_corner: Voltage boost fuse config = 0 boost = disable
  202. [ 1.808192] cpr3_mem_acc_init: apc: not using memory accelerator regulator
  203. [ 1.817327] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused SVS: open-loop= 704000 uV
  204. [ 1.824275] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused NOM: open-loop= 816000 uV
  205. [ 1.834256] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused TURBO: open-loop= 872000 uV
  206. [ 1.844067] cpr4_ipq807x_apss_calculate_open_loop_voltages: apc_corner: fused STURBO: open-loop= 976000 uV
  207. [ 1.853925] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused SVS: quot[ 7]= 720, quot_offset[ 7]= 0
  208. [ 1.863687] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused NOM: quot[ 7]= 929, quot_offset[ 7]= 205
  209. [ 1.874537] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused TURBO: quot[ 7]=1022, quot_offset[ 7]= 90
  210. [ 1.885473] cpr4_ipq807x_apss_calculate_target_quotients: apc_corner: fused STURBO: quot[ 7]=1204, quot_offset[ 7]= 180
  211. [ 1.896607] cpr3_regulator_init_ctrl: apc: Default CPR mode = closed-loop
  212. [ 1.898106] cpu cpu0: SoC ID 399 is not part of IPQ8074 family, limiting to 1.4GHz!
  213. [ 1.915163] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 19200 KHz, changing to: 1017600 KHz
  214. [ 1.923412] remoteproc remoteproc0: cd00000.q6v5_wcss is available
  215. [ 1.932903] ubi0: attaching mtd24
  216. [ 2.213104] random: crng init done
  217. [ 2.765366] ubi0: scanning is finished
  218. [ 2.773485] ubi0: attached mtd24 (name "alt_rootfs", size 144 MiB)
  219. [ 2.773526] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  220. [ 2.778567] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  221. [ 2.785439] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  222. [ 2.792281] ubi0: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
  223. [ 2.799059] ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128
  224. [ 2.805310] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1696062101
  225. [ 2.812425] ubi0: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 80
  226. [ 2.821735] UBI: block: can't open volume on ubi0_-1, err=-19
  227. [ 2.821734] ubi0: background thread "ubi_bgt0d" started, PID 513
  228. [ 2.831357] block ubiblock0_1: created from ubi0:1(roo▒[ 2.851330] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  229. [ 2.851803] Freeing unused kernel memory: 1280K
  230. [ 2.883225] Run /sbin/init as init process
  231. [ 3.065512] init: Console is alive
  232. [ 3.065670] init: - watchdog -
  233. [ 3.677530] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  234. [ 3.855625] ssdk_phy_driver_init[369]:INFO:dev_id = 0, phy_adress = 5, phy_id = 0x6820805 phytype doesn't match
  235. [ 3.855675] malibu_phy_api_ops_init[2854]:INFO:qca probe malibu phy driver succeeded!
  236. [ 3.864693] hsl_phy_phydev_get[798]:ERROR:phy_addr 0 phydev is NULL
  237. [ 4.116786] hsl_phy_phydev_get[798]:ERROR:phy_addr 0 phydev is NULL
  238. [ 4.116950] hsl_phy_phydev_get[798]:ERROR:phy_addr 0 phydev is NULL
  239. [ 4.349297] regi_init[3989]:INFO:Initializing HPPE Done!!
  240. [ 4.349409] regi_init[4049]:INFO:qca-ssdk module init succeeded!
  241. [ 4.355914] EDMA ver 1 hw init
  242. [ 4.359957] EDMA HW Reset completed succesfully
  243. [ 4.362634] Num rings - TxDesc:1 (23-23) TxCmpl:1 (7-7)
  244. [ 4.367057] RxDesc:1 (15-15) RxFill:1 (7-7)
  245. [ 4.376172] **********************************************************
  246. [ 4.376410] * NSS Data Plane driver
  247. [ 4.382998] **********************************************************
  248. [ 4.399359] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  249. [ 4.399411] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
  250. [ 4.403921] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe65 hci version 0x110 quirks 0x0000000002010010
  251. [ 4.411339] xhci-hcd xhci-hcd.1.auto: irq 37, io mem 0x08a00000
  252. [ 4.420786] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  253. [ 4.426589] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
  254. [ 4.432134] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  255. [ 4.440161] hub 1-0:1.0: USB hub found
  256. [ 4.446374] hub 1-0:1.0: 1 port detected
  257. [ 4.450324] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  258. [ 4.454523] hub 2-0:1.0: USB hub found
  259. [ 4.462199] hub 2-0:1.0: 1 port detected
  260. [ 4.469703] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  261. [ 4.472441] init: - preinit -
  262. Press the [f] key and hit [enter] to enter failsafe mode
  263. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  264. [ 5.993300] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  265. [ 6.999995] UBIFS (ubi0:2): Mounting in unauthenticated mode
  266. [ 7.000131] UBIFS (ubi0:2): background thread "ubifs_bgt0_2" started, PID 737
  267. [ 7.033351] nss-dp 3a001400.dp3 lan1: PHY Link up speed: 1000
  268. [ 7.033423] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
  269. [ 7.039583] UBIFS (ubi0:2): recovery needed
  270. [ 7.073626] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  271. [ 7.146028] UBIFS (ubi0:2): recovery completed
  272. [ 7.146116] UBIFS (ubi0:2): UBIFS: mounted UBI device 0, volume 2, name "rootfs_data"
  273. [ 7.149368] UBIFS (ubi0:2): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  274. [ 7.157290] UBIFS (ubi0:2): FS size: 121896960 bytes (116 MiB, 960 LEBs), max 971 LEBs, journal size 6094848 bytes (5 MiB, 48 LEBs)
  275. [ 7.167182] UBIFS (ubi0:2): reserved for root: 4952683 bytes (4836 KiB)
  276. [ 7.178800] UBIFS (ubi0:2): media format: w5/r0 (latest is w5/r0), UUID 0FBA9F4F-1120-47DD-BC45-233550593099, small LPT model
  277. [ 7.188357] mount_root: switching to ubifs overlay
  278. [ 7.200671] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
  279. [ 7.206226] urandom-seed: Seeding with /etc/urandom.seed
  280. [ 7.274698] nss-dp 3a001400.dp3 lan1: PHY Link is down
  281. [ 7.278729] procd: - early -
  282. [ 7.278854] procd: - watchdog -
  283. [ 7.848831] procd: - watchdog -
  284. [ 7.849458] procd: - ubus -
  285. [ 8.006723] procd: - init -
  286. Please press Enter to activate this console.
  287. [ 8.168050] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  288. [ 8.251708] kmodloader: loading kernel modules from /etc/modules.d/*
  289. [ 8.318361] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
  290. [ 8.318404] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
  291. [ 8.330330] NET: Registered PF_QIPCRTR protocol family
  292. [ 8.364587] PPP generic driver version 2.4.2
  293. [ 8.365575] NET: Registered PF_PPPOX protocol family
  294. [ 8.374860] ath11k c000000.wifi: ipq8074 hw2.0
  295. [ 8.374896] ath11k c000000.wifi: FW memory mode: 1
  296. [ 8.378459] remoteproc remoteproc0: powering up cd00000.q6v5_wcss
  297. [ 8.383359] remoteproc remoteproc0: Booting fw image IPQ8074/q6_fw.mdt, size 668
  298. [ 8.511731] urngd: v1.0.2 started.
  299. [ 9.193301] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  300. [ 9.625083] remoteproc remoteproc0: remote processor cd00000.q6v5_wcss is now up
  301. [ 9.629470] kmodloader: done loading kernel modules from /etc/modules.d/*
  302. [ 9.669164] ath11k c000000.wifi: qmi ignore invalid mem req type 3
  303. [ 9.676603] ath11k c000000.wifi: chip_id 0x0 chip_family 0x0 board_id 0xff soc_id 0xffffffff
  304. [ 9.676654] ath11k c000000.wifi: fw_version 0x290984a5 fw_build_timestamp 2023-07-19 02:31 fw_build_id WLAN.HK.2.9.0.1-01862-QCAHKSWPL_SILICONZ-1
  305. [ 9.823938] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Linksys-MX4200 from ath11k/IPQ8074/hw2.0/board-2.bin
  306. [ 9.824006] ath11k c000000.wifi: failed to fetch board data for bus=ahb,qmi-chip-id=0,qmi-board-id=255 from ath11k/IPQ8074/hw2.0/board-2.bin
  307. [ 9.837437] ath11k c000000.wifi: failed to fetch board.bin from IPQ8074/hw2.0
  308. [ 9.850239] ath11k c000000.wifi: qmi failed to fetch board file: -12
  309. [ 9.857261] ath11k c000000.wifi: failed to load board data file: -12
  310. [ 10.242175] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  311. [ 11.273552] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  312. [ 12.270786] br-lan: port 1(lan1) entered blocking state
  313. [ 12.270838] br-lan: port 1(lan1) entered disabled state
  314. [ 12.275171] device lan1 entered promiscuous mode
  315. [ 12.291829] br-lan: port 2(lan2) entered blocking state
  316. [ 12.291876] br-lan: port 2(lan2) entered disabled state
  317. [ 12.296209] device lan2 entered promiscuous mode
  318. [ 12.305727] br-lan: port 3(lan3) entered blocking state
  319. [ 12.305946] br-lan: port 3(lan3) entered disabled state
  320. [ 12.311130] device lan3 entered promiscuous mode
  321. [ 12.313775] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  322. [ 13.368189] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  323. [ 14.393757] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  324. [ 15.353267] nss-dp 3a001400.dp3 lan1: PHY Link up speed: 1000
  325. [ 15.353337] br-lan: port 1(lan1) entered blocking state
  326. [ 15.357994] br-lan: port 1(lan1) entered forwarding state
  327. [ 15.363305] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  328. [ 15.433685] nss-dp 3a001200.dp2 wan: PHY Link up speed: 1000
  329. [ 15.433762] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  330. [ 15.438750] hsl_phy_phydev_get[798]:ERROR:phy_addr 5 phydev is NULL
  331.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!