API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 13th, 2020
98
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 46.14 KB | None | 0 0
raw download clone embed print report
  1. ?HELLO! BOOT0 is starting!
  2. boot0 version : 3.1.0
  3. dram size =512
  4. card boot number = 2
  5. card no is 2
  6. sdcard 2 line count 0
  7. [mmc]: mmc driver ver 2014-04-3 16:20
  8. [mmc]: ***Try SD card 2***
  9. [mmc]: mmc 2 cmd 8 timeout, err 0x00000100
  10. [mmc]: mmc 2 cmd 8 err 0x00000100
  11. [mmc]: mmc 2 send if cond failed
  12. [mmc]: mmc 2 cmd 55 timeout, err 0x00000100
  13. [mmc]: mmc 2 cmd 55 err 0x00000100
  14. [mmc]: mmc 2 send app cmd failed
  15. [mmc]: ***Try MMC card 2***
  16. [mmc]: MMC ver 4.5
  17. [mmc]: SD/MMC Card: 4bit, capacity: 3776MB
  18. [mmc]: vendor: Man 0x00450100 Snr 0x3a44c129
  19. [mmc]: product: SEM04
  20. [mmc]: revision: 4.7
  21. [mmc]: ***SD/MMC 2 init OK!!!***
  22. sdcard 2 init ok
  23. The size of uboot is 0x000ac000.
  24. sum=0x1b9516ce
  25. src_sum=0x1b9516ce
  26. Succeed in loading uboot from sdmmc flash.
  27. Ready to disable icache.
  28. Jump to secend Boot.
  29. [ 0.306]
  30.  
  31. U-Boot 2011.09-rc1-svn (Feb 19 2015 - 19:43:52) Allwinner Technology
  32.  
  33. [ 0.314]version: 1.1.0
  34. [ 0.317]pmbus: ready
  35. [ 0.422]PMU: AXP209
  36. [ 0.424]PMU: AXP20x found
  37. [ 0.427]PMU: bat ratio = 100
  38. [ 0.435]PMU: dcdc2 1450
  39. [ 0.446]PMU: pll1 912 Mhz
  40. boot_clock = 912
  41. dcdc2_vol = 1450
  42. dcdc3_vol = 1300
  43. ldo2_vol = 3000
  44. ldo3_vol = 2800
  45. ldo4_vol = 2800
  46. power_start = 0
  47. storage_type = 0
  48. usb_recovery = 0
  49. find power_sply to end
  50. fel key old mode
  51. run key detect
  52. no key found
  53. no key input
  54. dram_para_set start
  55. dram_para_set end
  56. [ 0.486]DRAM: 512 MiB
  57. relocation Offset is: 15b17000
  58. user_gpio config
  59. user_gpio ok
  60. [ir_boot_para]:the ir is no use
  61. workmode = 0
  62. MMC: 2
  63. [ 0.631][mmc]: mmc driver ver 2014-5-23 10:07:00
  64. [ 0.636][mmc]: get sdc_odly_25M fail,use default dly 0
  65. [ 0.641][mmc]: get sdc_sdly_25M fail,use default dly 5
  66. [ 0.647][mmc]: get sdc_odly_50M fail,use default dly 3
  67. [ 0.652][mmc]: get sdc_sdly_50M fail,use default dly 5
  68. [ 0.657][mmc]: get sdc_f_max fail,use default sdc_f_max 52000000
  69. [ 0.663][mmc]: SUNXI SD/MMC: 2
  70. [ 0.676][mmc]: ************Try SD card 2************
  71. [ 0.681][mmc]: mmc 2 cmd 8 timeout, err 100
  72. [ 0.688][mmc]: mmc 2 mmc cmd 8 err 0x00000100
  73. [ 0.692][mmc]: mmc send if cond failed
  74. [ 0.696][mmc]: mmc 2 cmd 55 timeout, err 100
  75. [ 0.702][mmc]: mmc 2 mmc cmd 55 err 0x00000100
  76. [ 0.706][mmc]: send app cmd failed
  77. [ 0.709][mmc]: ************Try MMC card 2************
  78. [ 0.754][mmc]: MID 000045 PSN 44c12930
  79. [ 0.757][mmc]: PNM SEM04G -- 0x53-45-4d-30-34-47
  80. [ 0.762][mmc]: PRV 3.10
  81. [ 0.765][mmc]: MDT m-10 y-2017
  82. [ 0.768][mmc]: MMC ver 4.5
  83. [ 0.771][mmc]: ---------------mmc->clock 52000000-----------
  84. [ 0.776][mmc]: ---------------mmc->bus_width 4--------------
  85. [ 0.782][mmc]: SD/MMC Card: 4bit, capacity: 3776MB
  86. [ 0.787][mmc]: boot0 capacity: 2000KB,boot1 capacity: 2000KB
  87. [ 0.793][mmc]: ************SD/MMC 2 init OK!!!************
  88. [ 0.799]sunxi flash init ok
  89. DRV_DISP_Init: opened
  90. [ 0.902]fetch script data boot_disp.output_type fail
  91. [ 0.907]fetch script data boot_disp.output_mode fail
  92. [ 0.913]fetch script data boot_disp.auto_hpd fail
  93. [ 0.917]lcd0_para.lcd_used=0
  94. error: open config.fex, maybe it is not exist
  95. Hdmi_dvi_enable is NULL
  96. Hdmi_get_input_csc is NULL
  97. In: serial
  98. Out: serial
  99. Err: serial
  100. --------fastboot partitions--------
  101. -total partitions:5-
  102. -name- -start- -size-
  103. bootloader : 1000000 2000000
  104. env : 3000000 1000000
  105. boot : 4000000 1000000
  106. rootfs : 5000000 20000000
  107. UDISK : 25000000 0
  108. -----------------------------------
  109. base bootcmd=run setargs_mmc boot_normal
  110. bootcmd set setargs_mmc
  111. key 0
  112. recovery key high 6, low 4
  113. cant find fstbt value
  114. no misc partition is found
  115. to be run cmd=run setargs_mmc boot_normal
  116. the part isn't exist
  117. WORK_MODE_BOOT
  118. sunxi_bmp_display
  119. f_read btr over hd12871
  120. read byte = 4208056
  121. [ 1.229]fetch script data boot_disp.virtual_logo_width fail or vale=0
  122. CONFIG_ARCH_SUN7IW1P1 : coef_rdy_en!!!
  123. [ 1.239]Hit any key to stop autoboot: 0
  124. read boot or recovery all
  125. [ 1.957]sunxi flash read :offset 4000000, 16246686 bytes OK
  126. [ 1.976]ready to boot
  127. [ 1.978][mmc]: mmc exit start
  128. [ 1.996][mmc]: mmc 2 cmd 8 timeout, err 100
  129. [ 2.003][mmc]: mmc 2 mmc cmd 8 err 0x00000100
  130. [ 2.007][mmc]: mmc send if cond failed
  131. [ 2.011][mmc]: mmc 2 cmd 55 timeout, err 100
  132. [ 2.017][mmc]: mmc 2 mmc cmd 55 err 0x00000100
  133. [ 2.021][mmc]: send app cmd failed
  134. [ 2.032][mmc]: mmc 2 exit ok
  135. [ 2.035]
  136. Starting kernel ...
  137.  
  138. [ 0.000000] Booting Linux on physical CPU 0
  139. [ 0.000000] Initializing cgroup subsys cpuset
  140. [ 0.000000] Initializing cgroup subsys cpu
  141. [ 0.000000] Linux version 3.4.106+ (jenkins@jenkins.umix.io) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #97 SMP Thu Jan 18 21:57:45 CET 2018
  142. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  143. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  144. [ 0.000000] Machine: sun7i
  145. [ 0.000000] [sun7i_fixup]: From boot, get meminfo:
  146. [ 0.000000] Start: 0x40000000
  147. [ 0.000000] Size: 512MB
  148. [ 0.000000] memory reserved(in bytes):
  149. [ 0.000000] : 0x43000000, 0x00010000
  150. [ 0.000000] : 0x52000000, 0x00020000
  151. [ 0.000000] persist ram addr: 0x5fff0000
  152. [ 0.000000] Initialized persistent memory from 5fff0000-5fffffff
  153. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  154. [ 0.000000] On node 0 totalpages: 104448
  155. [ 0.000000] free_area_init_node: node 0, pgdat c098f980, node_mem_map d0000000
  156. [ 0.000000] DMA zone: 576 pages used for memmap
  157. [ 0.000000] DMA zone: 0 pages reserved
  158. [ 0.000000] DMA zone: 64960 pages, LIFO batch:15
  159. [ 0.000000] Normal zone: 576 pages used for memmap
  160. [ 0.000000] Normal zone: 38336 pages, LIFO batch:7
  161. [ 0.000000] [scu_get_core_count] cores=1800001
  162. [ 0.000000] sun7i_init_early: enter
  163. [ 0.000000] PERCPU: Embedded 8 pages/cpu @d0484000 s10240 r8192 d14336 u32768
  164. [ 0.000000] pcpu-alloc: s10240 r8192 d14336 u32768 alloc=8*4096
  165. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  166. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 103296
  167. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p7 init=/init loglevel=8 partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:rootfs@mmcblk0p7:UDISK@mmcblk0p1 boot_type=2 disp_para=40500
  168. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  169. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  170. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  171. [ 0.000000] Memory: 64MB 344MB = 408MB total
  172. [ 0.000000] Memory: 395960k/395960k available, 128328k reserved, 0K highmem
  173. [ 0.000000] Virtual kernel memory layout:
  174. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  175. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  176. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  177. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  178. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  179. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  180. [ 0.000000] .text : 0xc0008000 - 0xc08d2408 (9002 kB)
  181. [ 0.000000] .init : 0xc08d3000 - 0xc092a800 ( 350 kB)
  182. [ 0.000000] .data : 0xc092c000 - 0xc09923d8 ( 409 kB)
  183. [ 0.000000] .bss : 0xc09923fc - 0xc0b22028 (1600 kB)
  184. [ 0.000000] Hierarchical RCU implementation.
  185. [ 0.000000] Additional per-CPU info printed with stalls.
  186. [ 0.000000] NR_IRQS:160
  187. [ 0.000000] aw_clkevt_init: timer base 0xe0800c00
  188. [ 0.000000] [aw_delay]: It is use use_time_delay function!
  189. [ 0.000000] aw_clksrc_init(96)
  190. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  191. [ 0.000000] aw_clksrc_init(120)
  192. [ 0.000000] Architected local timer running at 24.00MHz.
  193. [ 0.000000] Console: colour dummy device 80x30
  194. [ 0.000525] Calibrating delay loop... 18169.85 BogoMIPS (lpj=9084928)
  195. [ 0.059934] pid_max: default: 32768 minimum: 301
  196. [ 0.060315] Mount-cache hash table entries: 512
  197. [ 0.061338] Initializing cgroup subsys debug
  198. [ 0.061362] Initializing cgroup subsys cpuacct
  199. [ 0.061375] Initializing cgroup subsys freezer
  200. [ 0.061444] CPU: Testing write buffer coherency: ok
  201. [ 0.061520] ftrace: allocating 23976 entries in 71 pages
  202. [ 0.109510] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  203. [ 0.110155] Setting up static identity map for 0x40630c00 - 0x40630c58
  204. [ 0.124531] CPU1: Booted secondary processor
  205. [ 0.131779] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  206. [ 0.131899] Brought up 2 CPUs
  207. [ 0.131917] SMP: Total of 2 processors activated (19996.67 BogoMIPS).
  208. [ 0.133073] devtmpfs: initialized
  209. [ 0.137798] script_init enter!
  210. [ 0.138882] script_init exit!
  211. [ 0.141139] dummy:
  212. [ 0.141710] NET: Registered protocol family 16
  213. [ 0.142427] sunxi_dump_init success
  214. [ 0.142814] script_sysfs_init success
  215. [ 0.145524] sun7i_init: enter
  216. [ 0.146832] persistent_ram: uncorrectable error in header
  217. [ 0.146851] persistent_ram: no valid data in buffer (sig = 0xffffffff)
  218. [ 0.155087] console [ram-1] enabled
  219. [ 0.155290] [ccu-inf] aw clock manager init
  220. [ 0.155372] [ccu-inf] aw_ccu_init
  221. [ 0.155697] [ccu-inf] script config pll3 to 297MHz
  222. [ 0.155885] [ccu-inf] script config pll4 to 300MHz
  223. [ 0.155971] [ccu-inf] script config pll6 to 600MHz
  224. [ 0.156120] [ccu-inf] script config pll7 to 297MHz
  225. [ 0.156204] [ccu-inf] script config pll8 to 336MHz
  226. [ 0.156805] sunxi_mem: paddr=0x44000000, size=104 Mbytes
  227. [ 0.157281] axp config [pmu_para] [pmu_used] : 1
  228. [ 0.157372] axp config [pmu_para] [pmu_twi_id] : 0
  229. [ 0.157520] axp config [pmu_para] [pmu_irq_id] : 32
  230. [ 0.157603] axp config [pmu_para] [pmu_twi_addr] : 52
  231. [ 0.157750] axp config [pmu_para] [pmu_battery_rdc] : 100
  232. [ 0.157833] axp config [pmu_para] [pmu_battery_cap] : 3200
  233. [ 0.157980] axp config [pmu_para] [pmu_init_chgcur] : 300
  234. [ 0.158089] axp config [pmu_para] [pmu_suspend_chgcur] : 1000
  235. [ 0.158244] axp config [pmu_para] [pmu_resume_chgcur] : 300
  236. [ 0.158328] axp config [pmu_para] [pmu_shutdown_chgcur] : 1000
  237. [ 0.158475] axp config [pmu_para] [pmu_init_chgvol] : 4200
  238. [ 0.158559] axp config [pmu_para] [pmu_init_chgend_rate] : 15
  239. [ 0.158708] axp config [pmu_para] [pmu_init_chg_enabled] : 1
  240. [ 0.158792] axp config [pmu_para] [pmu_init_adc_freq] : 100
  241. [ 0.158941] axp config [pmu_para] [pmu_init_adc_freqc] : 100
  242. [ 0.159025] axp config [pmu_para] [pmu_init_chg_pretime] : 50
  243. [ 0.159358] axp config [pmu_para] [pmu_init_chg_csttime] : 720
  244. [ 0.159452] axp config [pmu_para] [pmu_bat_para1] : 0
  245. [ 0.159602] axp config [pmu_para] [pmu_bat_para2] : 0
  246. [ 0.159687] axp config [pmu_para] [pmu_bat_para3] : 0
  247. [ 0.159774] axp config [pmu_para] [pmu_bat_para4] : 0
  248. [ 0.159922] axp config [pmu_para] [pmu_bat_para5] : 5
  249. [ 0.160005] axp config [pmu_para] [pmu_bat_para6] : 8
  250. [ 0.160151] axp config [pmu_para] [pmu_bat_para7] : 11
  251. [ 0.160256] axp config [pmu_para] [pmu_bat_para8] : 22
  252. [ 0.160404] axp config [pmu_para] [pmu_bat_para9] : 33
  253. [ 0.160487] axp config [pmu_para] [pmu_bat_para10] : 43
  254. [ 0.160634] axp config [pmu_para] [pmu_bat_para11] : 50
  255. [ 0.160717] axp config [pmu_para] [pmu_bat_para12] : 59
  256. [ 0.160864] axp config [pmu_para] [pmu_bat_para13] : 71
  257. [ 0.160947] axp config [pmu_para] [pmu_bat_para14] : 83
  258. [ 0.161033] axp config [pmu_para] [pmu_bat_para15] : 92
  259. [ 0.161180] axp config [pmu_para] [pmu_bat_para16] : 100
  260. [ 0.161276] axp config [pmu_para] [pmu_usbvol_limit] : 1
  261. [ 0.161427] axp config [pmu_para] [pmu_usbvol] : 4000
  262. [ 0.161510] axp config [pmu_para] [pmu_usbcur_limit] : 0
  263. [ 0.161659] axp config [pmu_para] [pmu_usbcur] : 0
  264. [ 0.161742] axp config [pmu_para] [pmu_pwroff_vol] : 3300
  265. [ 0.161889] axp config [pmu_para] [pmu_pwron_vol] : 2900
  266. [ 0.161974] axp config [target] [dcdc2_vol] : 1450
  267. [ 0.162122] axp config [target] [dcdc3_vol] : 1300
  268. [ 0.162203] axp config [target] [ldo2_vol] : 3000
  269. [ 0.162299] axp config [target] [ldo3_vol] : 2800
  270. [ 0.162446] axp config [target] [ldo4_vol] : 2800
  271. [ 0.162530] axp config [pmu_para] [pmu_pekoff_time] : 10000
  272. [ 0.162680] axp config [pmu_para] [pmu_pekoff_en] : 1
  273. [ 0.162763] axp config [pmu_para] [pmu_peklong_time] : 1500
  274. [ 0.162912] axp config [pmu_para] [pmu_pwrok_time] : 64
  275. [ 0.162996] axp config [pmu_para] [pmu_pwrnoe_time] : 2000
  276. [ 0.163143] axp config [pmu_para] [pmu_intotp_en] : 1
  277. [ 0.163227] axp config [pmu_para] [pmu_pekon_time] : 1000
  278. [ 0.164386] [gpio-inf] aw gpio init start
  279. [ 0.164570] [gpio-inf] gpio_clk_init: apb pio clk enable success
  280. [ 0.164905] gpiochip_add: registered GPIOs 0 to 17 on device: GPA
  281. [ 0.165299] gpiochip_add: registered GPIOs 24 to 47 on device: GPB
  282. [ 0.165643] gpiochip_add: registered GPIOs 54 to 78 on device: GPC
  283. [ 0.166014] gpiochip_add: registered GPIOs 85 to 112 on device: GPD
  284. [ 0.166386] gpiochip_add: registered GPIOs 119 to 130 on device: GPE
  285. [ 0.166710] gpiochip_add: registered GPIOs 137 to 142 on device: GPF
  286. [ 0.167092] gpiochip_add: registered GPIOs 149 to 160 on device: GPG
  287. [ 0.167375] gpiochip_add: registered GPIOs 167 to 194 on device: GPH
  288. [ 0.167777] gpiochip_add: registered GPIOs 201 to 222 on device: GPI
  289. [ 0.168324] [gpio-inf] aw gpio init done
  290. [ 0.232624] bio: create slab <bio-0> at 0
  291. [ 0.235208] SCSI subsystem initialized
  292. [ 0.235809] libata version 3.00 loaded.
  293. [ 0.237105] usbcore: registered new interface driver usbfs
  294. [ 0.237745] usbcore: registered new interface driver hub
  295. [ 0.238213] usbcore: registered new device driver usb
  296. [ 0.239169] [i2c3] fetch para from sysconfig failed
  297. [ 0.239366] [i2c4] fetch para from sysconfig failed
  298. [ 0.240900] -------------------------------------------
  299. [ 0.240996] axp_mfd_probe:axp20_mfd pmu probed !
  300. [ 0.241141] -------------------------------------------
  301. [ 0.243571] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
  302. [ 0.244974] [AXP20-MFD] enable dcdc2 dvm.
  303. [ 0.245091] -------------------------------------------
  304. [ 0.245237] axp_mfd_probe:axp20_mfd pmu request_irq ok !
  305. [ 0.245317] -------------------------------------------
  306. [ 0.247669] I2C: i2c-0: sun7i I2C adapter
  307. [ 0.247763] **********start************
  308. [ 0.247843] 0x40
  309. [ 0.247920] 0xf8
  310. [ 0.248061] 0x58
  311. [ 0.248138] 0x0
  312. [ 0.248215] 0x0
  313. [ 0.248293] **********end************
  314. [ 0.248917] I2C: i2c-1: sun7i I2C adapter
  315. [ 0.249069] **********start************
  316. [ 0.249149] 0x40
  317. [ 0.249227] 0xf8
  318. [ 0.249305] 0x58
  319. [ 0.249446] 0x0
  320. [ 0.249523] 0x0
  321. [ 0.249619] **********end************
  322. [ 0.250122] I2C: i2c-2: sun7i I2C adapter
  323. [ 0.250272] **********start************
  324. [ 0.250352] 0x40
  325. [ 0.250430] 0xf8
  326. [ 0.250507] 0x28
  327. [ 0.250584] 0x0
  328. [ 0.250831] 0x0
  329. [ 0.250917] **********end************
  330. [ 0.251204] Linux video capture interface: v2.00
  331. [ 0.251960] axp20_ldo1: 1300 mV
  332. [ 0.253926] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  333. [ 0.255790] axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  334. [ 0.257693] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  335. [ 0.259523] axp20_buck2: 700 <--> 2275 mV at 1450 mV
  336. [ 0.261315] axp20_buck3: 700 <--> 3500 mV at 1300 mV
  337. [ 0.262492] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  338. [ 0.263498] gpiochip_add: registered GPIOs 229 to 233 on device: axp_pin
  339. [ 0.264908] Advanced Linux Sound Architecture Driver Version 1.0.25.
  340. [ 0.267465] cfg80211: Calling CRDA to update world regulatory domain
  341. [ 0.268093] cfg80211: World regulatory domain updated:
  342. [ 0.268292] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  343. [ 0.268385] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
  344. [ 0.268535] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
  345. [ 0.268684] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
  346. [ 0.268698] Switching to clocksource arch_sys_counter
  347. [ 0.268907] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  348. [ 0.268994] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  349. [ 0.269143] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
  350. [ 0.269408] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
  351. [ 0.269498] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  352. [ 0.283118] FS-Cache: Loaded
  353. [ 0.283940] CacheFiles: Loaded
  354. [ 0.308293] line = 507,usb_manager_init
  355. [ 0.308397] [usb_manager]: CONFIG_USB_SW_SUN7I_USB0_OTG
  356. [ 0.308571] WRN:L209(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc(0) id failed
  357. [ 0.308819] WRN:L220(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc(0) det_vbus gpio failed
  358. [ 0.309045] WRN:L232(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc(0) det_vbus axp failed
  359. [ 0.309269] WRN:L243(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc(0) det_vbus failed
  360. [ 0.309491] WRN:L252(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc(0) ac_enable failed
  361. [ 0.309649] WRN:L260(drivers/usb/sun7i_usb/manager/usb_manager.c):ERR: get usbc0(usb_restrict) failed
  362. [ 0.310421] [sw_hcd0]: usb host driver initialize........
  363. [ 0.310789] [sw_hcd0]: open_usb_clock
  364. [ 0.330824] WRN:L476(drivers/usb/sun7i_usb/hcd/hcd0/sw_hcd0.c):ERR: get usbc0(drv vbus) failed
  365. [ 0.331048] [sw_hcd0]: host_init_state = 1
  366. [ 0.331167] [sw_hcd0]: platform is usb host
  367. [ 0.331466] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 70
  368. [ 0.331639] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  369. [ 0.331854] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  370. [ 0.333143] hub 1-0:1.0: USB hub found
  371. [ 0.333254] hub 1-0:1.0: 1 port detected
  372. [ 0.333360] [sw_hcd_host0]: Set USB Power ON
  373. [ 0.334207] [sw_udc]: udc_init: version 20080411
  374. [ 0.334824] WRN:L3746(drivers/usb/sun7i_usb/udc/sw_udc.c):ERR: platform_driver_register failed
  375. [ 0.335387] NET: Registered protocol family 2
  376. [ 0.348019] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  377. [ 0.349276] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  378. [ 0.350160] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  379. [ 0.350561] TCP: Hash tables configured (established 16384 bind 16384)
  380. [ 0.350742] TCP: reno registered
  381. [ 0.350862] UDP hash table entries: 256 (order: 1, 8192 bytes)
  382. [ 0.350985] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  383. [ 0.351601] NET: Registered protocol family 1
  384. [ 0.352307] RPC: Registered named UNIX socket transport module.
  385. [ 0.352467] RPC: Registered udp transport module.
  386. [ 0.352548] RPC: Registered tcp transport module.
  387. [ 0.352732] RPC: Registered tcp NFSv4.1 backchannel transport module.
  388. [ 0.353155] Unpacking initramfs...
  389. [ 0.433410] hub 1-0:1.0: [hub_activate 881]
  390. [ 0.777267] Freeing initrd memory: 5072K
  391. [ 0.777785] sunxi_reg_init enter
  392. [ 0.779424] [pm]aw_pm_init!
  393. [ 0.779526] dram config [dram_para] [dram_baseaddr] : 0x40000000
  394. [ 0.779612] dram config [dram_para] [dram_clk] : 0x180
  395. [ 0.779786] dram config [dram_para] [dram_type] : 0x3
  396. [ 0.779871] dram config [dram_para] [dram_rank_num] : 0x1
  397. [ 0.780019] dram config [dram_para] [dram_chip_density] : 0x1000
  398. [ 0.780102] dram config [dram_para] [dram_io_width] : 0x10
  399. [ 0.780251] dram config [dram_para] [dram_bus_width] : 0x10
  400. [ 0.780334] dram config [dram_para] [dram_cas] : 0x9
  401. [ 0.780480] dram config [dram_para] [dram_zq] : 0x7f
  402. [ 0.780562] dram config [dram_para] [dram_odt_en] : 0x0
  403. [ 0.780721] dram config [dram_para] [dram_size] : 0x200
  404. [ 0.780805] dram config [dram_para] [dram_tpr0] : 0x38d48893
  405. [ 0.780952] dram config [dram_para] [dram_tpr1] : 0xa0a0
  406. [ 0.781035] dram config [dram_para] [dram_tpr2] : 0x22a00
  407. [ 0.781118] dram config [dram_para] [dram_tpr3] : 0x0
  408. [ 0.781263] dram config [dram_para] [dram_tpr4] : 0x0
  409. [ 0.781345] dram config [dram_para] [dram_tpr5] : 0x0
  410. [ 0.781491] dram config [dram_para] [dram_emr1] : 0x4
  411. [ 0.781576] dram config [dram_para] [dram_emr2] : 0x10
  412. [ 0.781734] dram config [dram_para] [dram_emr3] : 0x0
  413. [ 0.781818] standby_mode = 0.
  414. [ 0.781897] aw_pm_init: not support super standby.
  415. [ 0.782045] aw_pm_init: script_parser_fetch err.
  416. [ 0.782126] notice: ir_wakeup = 0.
  417. [ 0.782272] aw_pm_init: script_parser_fetch err.
  418. [ 0.782352] notice: ir_addr_code = 0.
  419. [ 0.782432] aw_pm_init: script_parser_fetch err.
  420. [ 0.782576] notice: power_key = 87.
  421. [ 0.782657] cpu0_en = 0.
  422. [ 0.782760] dram_selfresh_en = 1.
  423. [ 0.782907] wakeup src cnt is : 0.
  424. [ 0.783087] DRAM_STANDBY_PGD_ADDR:d201c000
  425. [ 0.783202] [wifi]: select wifi: rtl8188eu !!
  426. [ 0.783884] [rtl8188eu]: exec rtl8188eu_wifi_gpio_init
  427. [ 0.783984] [rtl8188eu]: module power name
  428. [ 0.784066] [rtl8188eu]: get rtl8188eu rtk_rtl8188eu_wl_dis gpio failed
  429. [ 0.784240] [wifi_pm]: wifi gpio init is OK !!
  430. [ 0.784576] [powernow inf] module init
  431. [ 0.784980] [powernow inf] create class sw_powernow done
  432. [ 0.788276] Registering unionfs 2.6 (for 3.4.103)
  433. [ 0.790016] NTFS driver 2.1.30 [Flags: R/W].
  434. [ 0.790302] fuse init (API version 7.18)
  435. [ 0.791746] msgmni has been set to 783
  436. [ 0.793794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  437. [ 0.793898] io scheduler noop registered
  438. [ 0.794048] io scheduler deadline registered (default)
  439. [ 0.794225] io scheduler cfq registered
  440. [ 0.795811] [DISP]capture_module_init
  441. [ 0.797008] [DISP]capture_probe
  442. [ 0.797353] [DISP]==capture finish==
  443. [ 0.807816] [uart]: driver initializied
  444. [ 0.808808] sw_serial.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a SW
  445. [ 0.808916] [uart]: console setup baud 115200 parity n bits 8, flow n
  446. [ 0.809080] [uart]: uart0 LCR & BAUD changed, reset controller...
  447. [ 2.551469] console [ttyS0] enabled
  448. [ 2.556361] sw_serial.5: ttyS5 at MMIO 0x1c29400 (irq = 50) is a SW
  449. [ 2.565231] G2D: drv_g2d_init
  450. [ 2.568912] G2D: Module initialized.major:249
  451. [ 2.574898] sunmm_probe, line 269
  452. [ 2.586878] loop: module loaded
  453. [ 2.592604] sw_ahci sw_ahci.0: AHCI is disable
  454. [ 2.597862] sw_ahci: probe of sw_ahci.0 failed with error -22
  455. [ 2.605238] [spi-inf] sun7i spi init
  456. [ 2.609455] [spi-inf] spi_sun7i_init: spi_used: 0x2
  457. [ 2.614998] [spi-inf] sun7i_spi_register_spidev: found 1 spi devices in sys_config
  458. [ 2.623617] [spi-inf] boards_num modalias max_spd_hz bus_num cs mode
  459. [ 2.633088] [spi-inf] 0 spidev 12000000 1 0 3
  460. [ 2.643012] [spi-inf] sun7i_spi_probe: spi1 dma type: normal
  461. [ 2.649518] [spi-inf] sun7i_spi_probe: spi1 cs bitmap: 0x1
  462. [ 2.655987] [spi-inf] sun7i_spi_set_mclk: spi1 source = sata_pll, src_clk = 600000000, mclk 100000000
  463. [ 2.666849] sun7i-spi sun7i-spi.1: master is unqueued, this is deprecated
  464. [ 2.675298] [spi-inf] sun7i_spi_probe: reuuimlla's SoC SPI Driver loaded for Bus SPI1 with 2 Slaves at most
  465. [ 2.686291] [spi-inf] sun7i_spi_probe: spi1 driver probe succeed, base e083e000, irq 43, dma_id_rx 25, dma_id_tx 25
  466. [ 2.698337] tun: Universal TUN/TAP device driver, 1.6
  467. [ 2.704191] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  468. [ 2.711572] [sunxi_emac]: Init wemac Ethernet Driver, V3.00
  469. [ 2.718446] can't get item for emac_power gpio !
  470. [ 2.723800] 55f32860917a15555de4d434d4e2db3e
  471. [ 2.731411] PPP generic driver version 2.4.2
  472. [ 2.736891] PPP BSD Compression module registered
  473. [ 2.742241] PPP Deflate Compression module registered
  474. [ 2.751845] PPP MPPE Compression module registered
  475. [ 2.757312] NET: Registered protocol family 24
  476. [ 2.762472] PPTP driver version 0.8.5
  477. [ 2.767475] sw_usb_enable_hcd: usbc_num = 2
  478. [ 2.772331] [rtl8188eu]: usb wifi power state: on
  479. [ 2.787669] WRN:L1229(drivers/usb/host/ehci_sun7i.c):ERR: sw_ehci is null
  480. [ 2.795417] WRN:L764(drivers/usb/host/ohci_sun7i.c):ERR: sw_ohci is null
  481. [ 2.803731] usbcore: registered new interface driver rtl8188eu
  482. [ 2.810446] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  483. [ 2.818148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  484. [ 2.825476] [sw_hci_sun4i_init 1254]
  485. [ 2.829590] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(restrict_gpio) is invalid
  486. [ 2.839351] WRN:L172(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci1(drv vbus) is invalid
  487. [ 2.848603] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(restrict_gpio) is invalid
  488. [ 2.858395] WRN:L172(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci1(drv vbus) is invalid
  489. [ 2.867700] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(restrict_gpio) is invalid
  490. [ 2.877446] WRN:L172(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ehci2(drv vbus) is invalid
  491. [ 2.886702] WRN:L163(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(restrict_gpio) is invalid
  492. [ 2.896460] WRN:L172(drivers/usb/host/sw_hci_sun7i.c):ERR: sw-ohci2(drv vbus) is invalid
  493. [ 2.906114] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc0a184c4
  494. [ 2.914935] [sw-ehci1]: open clock
  495. [ 2.938677] [sw-ehci1]: open clock, 0x60(0x20c463), 0xcc(0x103)
  496. [ 2.945370] [sw-ehci1]: Set USB Power ON
  497. [ 2.949886] __set_vbus
  498. [ 2.952608] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  499. [ 2.961143] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  500. [ 2.969243] sw-ehci sw-ehci.1: irq 71, io mem 0xf1c14000
  501. [ 2.980692] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
  502. [ 2.987926] hub 2-0:1.0: USB hub found
  503. [ 2.992235] hub 2-0:1.0: 1 port detected
  504. [ 2.997590] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc0a185d8
  505. [ 3.006464] [sw-ohci1]: open clock
  506. [ 3.030216] [sw-ohci1]: open clock, 0x60(0x20c467), 0xcc(0x163)
  507. [ 3.036908] [sw_ohci_hcd_probe 361]:reg(0xf1c20060) = 20c467
  508. [ 3.043375] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  509. [ 3.051476] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  510. [ 3.059545] sw-ohci sw-ohci.1: irq 96, io mem 0xf1c14400
  511. [ 3.096699] hub 2-0:1.0: [hub_activate 881]
  512. [ 3.120721] hub 3-0:1.0: USB hub found
  513. [ 3.125025] hub 3-0:1.0: 1 port detected
  514. [ 3.130375] [sw-ehci2]: probe, pdev->name: sw-ehci, pdev->id: 2, sw_ehci: 0xc0a186ec
  515. [ 3.139184] [sw-ehci2]: open clock
  516. [ 3.162998] [sw-ehci2]: open clock, 0x60(0x20c46f), 0xcc(0x167)
  517. [ 3.169693] [sw-ehci2]: Set USB Power ON
  518. [ 3.174147] __set_vbus
  519. [ 3.176922] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  520. [ 3.185388] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4
  521. [ 3.193544] sw-ehci sw-ehci.2: irq 72, io mem 0xf1c1c000
  522. [ 3.204698] sw-ehci sw-ehci.2: USB 0.0 started, EHCI 1.00
  523. [ 3.212018] hub 4-0:1.0: USB hub found
  524. [ 3.216334] hub 4-0:1.0: 1 port detected
  525. [ 3.221806] [sw-ohci2]: probe, pdev->name: sw-ohci, pdev->id: 2, sw_ohci: 0xc0a18800
  526. [ 3.230586] hub 3-0:1.0: [hub_activate 881]
  527. [ 3.235500] [sw-ohci2]: open clock
  528. [ 3.259250] [sw-ohci2]: open clock, 0x60(0x20c47f), 0xcc(0x1e7)
  529. [ 3.265947] [sw_ohci_hcd_probe 361]:reg(0xf1c20060) = 20c47f
  530. [ 3.272414] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  531. [ 3.280580] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5
  532. [ 3.288588] sw-ohci sw-ohci.2: irq 97, io mem 0xf1c1c400
  533. [ 3.320690] hub 4-0:1.0: [hub_activate 881]
  534. [ 3.350780] hub 5-0:1.0: USB hub found
  535. [ 3.355121] hub 5-0:1.0: 1 port detected
  536. [ 3.360543] usbcore: registered new interface driver cdc_acm
  537. [ 3.366980] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  538. [ 3.376071] Initializing USB Mass Storage driver...
  539. [ 3.382002] usbcore: registered new interface driver usb-storage
  540. [ 3.388870] USB Mass Storage support registered.
  541. [ 3.394642] usbcore: registered new interface driver usbserial
  542. [ 3.401344] usbserial: USB Serial Driver core
  543. [ 3.406572] usbcore: registered new interface driver option
  544. [ 3.413198] USB Serial support registered for GSM modem (1-port)
  545. [ 3.420837] uinput result 0 , vmouse_init
  546. [ 3.426207] input: vmouse as /devices/virtual/input/input0
  547. [ 3.433397] mousedev: PS/2 mouse device common for all mice
  548. [ 3.440811] input: sw-keyboard as /devices/virtual/input/input1
  549. [ 3.447736] usb 3-1: new low-speed USB device number 2 using sw-ohci
  550. [ 3.456375] sunxi_rtc_init: enter
  551. [ 3.460277] hub 5-0:1.0: [hub_activate 881]
  552. [ 3.465504] rtc_hw_init(400): start
  553. [ 3.469678] rtc_hw_init(432): end
  554. [ 3.473569] sunxi_rtc_gettime, line 39
  555. [ 3.477849] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
  556. [ 3.483547] sunxi_rtc_gettime(61): year < 70, so add 100, to check
  557. [ 3.490532] sunxi_rtc_gettime(67): read time 2000-1-1 0:0:6
  558. [ 3.496904] sunxi_rtc_getalarm(269): year < 70, so add 100, to check
  559. [ 3.504078] sunxi_rtc_getalarm(281): get alarm time 2000-1-1 0:0:0
  560. [ 3.511135] sunxi_rtc_gettime, line 39
  561. [ 3.515403] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
  562. [ 3.521122] sunxi_rtc_gettime(61): year < 70, so add 100, to check
  563. [ 3.528116] sunxi_rtc_gettime(67): read time 2000-1-1 0:0:6
  564. [ 3.535201] using rtc device, rtc, for alarms
  565. [ 3.540032] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  566. [ 3.547503] i2c /dev entries driver
  567. [ 3.553072] lirc_dev: IR Remote Control driver registered, major 247
  568. [ 3.560381] IR NEC protocol handler initialized
  569. [ 3.565584] IR RC5(x) protocol handler initialized
  570. [ 3.571013] IR RC6 protocol handler initialized
  571. [ 3.576215] IR JVC protocol handler initialized
  572. [ 3.581451] IR Sony protocol handler initialized
  573. [ 3.586686] IR RC5 (streamzap) protocol handler initialized
  574. [ 3.593051] IR SANYO protocol handler initialized
  575. [ 3.598390] IR MCE Keyboard/mouse protocol handler initialized
  576. [ 3.605050] IR LIRC bridge handler initialized
  577. [ 3.610350] [hx-cedar dev]: install start!!!
  578. [ 3.616568] [cedar dev]: install end!!!
  579. [ 3.621529] input: axp20-supplyer as /devices/platform/sun7i-i2c.0/i2c-0/0-0034/axp20-supplyer.41/input/input2
  580. [ 3.644082] pmu_pekoff_time = 10000
  581. [ 3.648091] pmu_pekoff_en = 1
  582. [ 3.651489] pmu_peklong_time = 1500
  583. [ 3.655525] pmu_pekon_time = 1000
  584. [ 3.659320] pmu_pwrok_time = 64
  585. [ 3.662911] pmu_pwrnoe_time = 2000
  586. [ 3.666855] pmu_intotp_en = 1
  587. [ 3.670852] [AXP]POWER20_OFF_CTL:2070-->0x42
  588. [ 3.676291] POWER20_PEK_SET:2087-->0x9d
  589. [ 3.681308] POWER20_PEK_SET:2098-->0x9d
  590. [ 3.686264] POWER20_PEK_SET:2107-->0x9d
  591. [ 3.691219] POWER20_PEK_SET:2118-->0x9d
  592. [ 3.696235] POWER20_PEK_SET:2130-->0x9f
  593. [ 3.701187] POWER20_HOTOVER_CTL:2139-->0x25
  594. [ 3.709702] usb 4-1: new high-speed USB device number 2 using sw-ehci
  595. [ 3.710996] [AXP]last_rest_vol = 0, now_rest_vol = 100
  596. [ 3.712030] [AXP]charger->rest_vol = 100
  597. [ 3.729436] axp20_ldo2: Failed to create debugfs directory
  598. [ 3.735729] regulator_virtual_consumer_probe:get regulator:axp20_analog/fm ok
  599. [ 3.744280] regulator_virtual_consumer_probe:get regulator:axp20_pll ok
  600. [ 3.752265] regulator_virtual_consumer_probe:get regulator:axp20_hdmi ok
  601. [ 3.760289] axp20_buck2: Failed to create debugfs directory
  602. [ 3.766648] regulator_virtual_consumer_probe:get regulator:axp20_core ok
  603. [ 3.774636] regulator_virtual_consumer_probe:get regulator:axp20_ddr ok
  604. [ 3.782557] regulator_virtual_consumer_probe:get regulator:axp20_mic ok
  605. [ 3.790927] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
  606. [ 3.800934] device-mapper: multipath: version 1.3.2 loaded
  607. [ 3.807214] device-mapper: multipath round-robin: version 1.0.0 loaded
  608. [ 3.814677] device-mapper: multipath queue-length: version 0.1.0 loaded
  609. [ 3.822296] device-mapper: multipath service-time: version 0.2.0 loaded
  610. [ 3.831231] [mmc-msg] SD/MMC/SDIO Host Controller Driver(mmc driver ver 2014-05-23 10:12)
  611. [ 3.831242] Compiled in Dec 26 2017 at 00:13:44
  612. [ 3.845813] [mmc-msg] sw_mci_init
  613. [ 3.849723] [mmc-msg] get mmc0's sdc_f_max failed,use default sdc_f_max 50000000
  614. [ 3.858056] [mmc-msg] get mmc0's sdc_f_ddr_max failed,use default sdc_f_ddr_max 47000000
  615. [ 3.867209] [mmc-msg] get mmc0's sdc_ex_dly_used failed,use default dly
  616. [ 3.874730] [mmc-msg] get mmc2's sdc_f_max failed,use default sdc_f_max 50000000
  617. [ 3.883077] [mmc-msg] get mmc2's sdc_f_ddr_max failed,use default sdc_f_ddr_max 47000000
  618. [ 3.892247] [mmc-msg] get mmc2's sdc_ex_dly_used failed,use default dly
  619. [ 3.899719] [mmc-msg] MMC host used card: 0x5, boot card: 0x4, io_card 0
  620. [ 3.909207] [mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  621. [ 3.909294] hub 4-1:1.0: USB hub found
  622. [ 3.923738] hub 4-1:1.0: 4 ports detected
  623. [ 3.925720] [mmc-msg] sdc2 Probe: base:0xe089c000 irq:66 sg_cpu:ffdf5000(41000000) ret 0.
  624. [ 3.926245] [mmc-msg] sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  625. [ 3.926256] [mmc-msg] sdc2 power on
  626. [ 3.927759] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  627. [ 3.929708] [mmc-msg] sdc0 Probe: base:0xe089e000 irq:64 sg_cpu:ffdf4000(41001000) ret 0.
  628. [ 3.937728] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  629. [ 3.939934] input: Logitech USB Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.0/input/input3
  630. [ 3.940485] generic-usb 0003:046D:C31C.0001: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-sw-ohci-1/input0
  631. [ 3.952340] input: Logitech USB Keyboard as /devices/platform/sw-ohci.1/usb3/3-1/3-1:1.1/input/input4
  632. [ 3.952935] generic-usb 0003:046D:C31C.0002: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-sw-ohci-1/input1
  633. [ 3.953290] usbcore: registered new interface driver usbhid
  634. [ 3.953300] usbhid: USB HID core driver
  635. [ 4.038135] ashmem: initialized
  636. [ 4.042191] logger: created 256K log 'log_main'
  637. [ 4.047786] logger: created 256K log 'log_events'
  638. [ 4.053184] [mmc-err] smc 2 err, cmd 52, RTO
  639. [ 4.059017] [mmc-err] smc 2 err, cmd 52, RTO
  640. [ 4.064003] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  641. [ 4.074707] logger: created 256K log 'log_radio'
  642. [ 4.080290] logger: created 256K log 'log_system'
  643. [ 4.087735] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  644. [ 4.100532] [mmc-err] smc 2 err, cmd 8, RTO
  645. [ 4.105415] *******************Try sdio*******************
  646. [ 4.112429] [mmc-err] smc 2 err, cmd 5, RTO
  647. [ 4.118173] [mmc-err] smc 2 err, cmd 5, RTO
  648. [ 4.123862] [mmc-err] smc 2 err, cmd 5, RTO
  649. [ 4.129595] [mmc-err] smc 2 err, cmd 5, RTO
  650. [ 4.134472] *******************Try sd*******************
  651. [ 4.139409] usbcore: registered new interface driver snd-usb-audio
  652. [ 4.140411] value is 1
  653. [ 4.140421] audio_pa_ctrl_used=0
  654. [ 4.140821] enter sun7i Audio codec!!!
  655. [ 4.143056] sun7i audio support initialized
  656. [ 4.143308] sun7i Audio codec successfully loaded..
  657. [ 4.145912] soc-audio soc-audio.0: ASoC machine sndhdmi should use snd_soc_register_card()
  658. [ 4.146855] asoc: sndhdmi <-> sun7i-hdmiaudio.0 mapping ok
  659. [ 4.148339] [SPDIF]sun7i-spdif cannot find any using configuration for controllers, return directly!
  660. [ 4.149636] [SPDIF]sun7i_sndspdif cannot find any using configuration for controllers, return directly!
  661. [ 4.152131] soc-audio soc-audio.2: ASoC machine sndi2s should use snd_soc_register_card()
  662. [ 4.153473] asoc: sndi2s <-> sun7i-i2s.0 mapping ok
  663. [ 4.155387] func:sun7i_pcm_init(line:953)sun7i-pcm.c
  664. [ 4.155412] func:sun7i_pcm_init(line:964)sun7i-pcm.c,pcm_used:0
  665. [ 4.155421] [PCM]sun7i-i2s cannot find any using configuration for controllers, return directly!
  666. [ 4.155432] func:sun7i_soc_platform_i2s_init(line:803)sun7i-pcmdma.c
  667. [ 4.156186] func:sndpcm_codec_init(line:181)sndpcm.c
  668. [ 4.156204] func:sndpcm_codec_init(line:187)sndpcm.c,pcm_used:0
  669. [ 4.156213] [PCM]sndi2s cannot find any using configuration for controllers, return directly!
  670. [ 4.156231] func:sun7i_sndpcm_init(line:209)sun7i-sndpcm.c,pcm_used:0
  671. [ 4.156243] [I2S]sun7i_sndi2s cannot find any using configuration for controllers, return directly!
  672. [ 4.288044] hub 4-1:1.0: [hub_activate 881]
  673. [ 4.288108] Netfilter messages via NETLINK v0.30.
  674. [ 4.288221] nf_conntrack version 0.5.0 (6266 buckets, 25064 max)
  675. [ 4.288833] [mmc-err] smc 2 err, cmd 55, RTO
  676. [ 4.310261] hub 4-1:1.0: [hub_activate 881]
  677. [ 4.310271] ctnetlink v0.93: registering with nfnetlink.
  678. [ 4.310424] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  679. [ 4.310434] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  680. [ 4.310789] [mmc-err] smc 2 err, cmd 55, RTO
  681. [ 4.311739] [mmc-err] smc 2 err, cmd 55, RTO
  682. [ 4.345737] hub 4-1:1.0: [hub_activate 881]
  683. [ 4.346082] [mmc-err] smc 2 err, cmd 55, RTO
  684. [ 4.346104] *******************Try mmc*******************
  685. [ 4.346122] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  686. [ 4.346481] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  687. [ 4.346512] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  688. [ 4.346545] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  689. [ 4.349701] [mmc-msg] sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  690. [ 4.374853] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  691. [ 4.377736] xt_time: kernel timezone is -0000
  692. [ 4.378003] IPv4 over IPv4 tunneling driver
  693. [ 4.379499] gre: GRE over IPv4 demultiplexor driver
  694. [ 4.379513] ip_gre: GRE over IPv4 tunneling driver
  695. [ 4.381130] ip_tables: (C) 2000-2006 Netfilter Core Team
  696. [ 4.381356] arp_tables: (C) 2002 David S. Miller
  697. [ 4.381443] TCP: cubic registered
  698. [ 4.381452] Initializing XFRM netlink socket
  699. [ 4.465698] NET: Registered protocol family 10
  700. [ 4.471119] hub 4-1:1.0: [hub_activate 881]
  701. [ 4.475985] [mmc-msg] sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  702. [ 4.487937] Mobile IPv6
  703. [ 4.490888] ip6_tables: (C) 2000-2006 Netfilter Core Team
  704. [ 4.497264] IPv6 over IPv4 tunneling driver
  705. [ 4.504857] NET: Registered protocol family 17
  706. [ 4.510037] NET: Registered protocol family 15
  707. [ 4.515094] L2TP core driver, V2.0
  708. [ 4.519068] PPPoL2TP kernel driver, V2.0
  709. [ 4.523583] L2TP IP encapsulation support (L2TPv3)
  710. [ 4.529143] L2TP netlink interface
  711. [ 4.533123] L2TP ethernet pseudowire support (L2TPv3)
  712. [ 4.539147] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  713. [ 4.547990] [mmc-msg] sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  714. [ 4.548001] ThumbEE CPU extension supported.
  715. [ 4.548033] Registering SWP/SWPB emulation handler
  716. [ 4.548054] [rfkill]: init no bt used in configuration
  717. [ 4.549479] [LCD] lcd_module_init
  718. [ 4.578636] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
  719. [ 4.592038] [hdmi]hdmi module init
  720. [ 4.643843] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing MMC-HS(SDR20) dt B
  721. [ 4.655124] mmc0: new high speed MMC card at address 0001
  722. [ 4.663075] usb 4-1.3: new high-speed USB device number 3 using sw-ehci
  723. [ 4.679157] mmcblk0: mmc0:0001 SEM04G 3.68 GiB
  724. [ 4.679203] ##fb init:w=1280,h=720,fbmode=0
  725. [ 4.689653] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB
  726. [ 4.696699] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB
  727. [ 4.704951] mmcblk0: p1 p2 p3 < p5 p6 p7 >
  728. [ 4.709775] mmcblk0: p1 size 6578176 extends beyond EOD, truncated
  729. [ 4.721213] mmcblk0boot1: unknown partition table
  730. [ 4.729100] mmcblk0boot0: unknown partition table
  731. [ 4.760463] bFWReady == _FALSE call reset 8051...
  732. [ 4.789783] axp20_buck3: incomplete constraints, leaving on
  733. [ 4.796509] axp20_buck2: incomplete constraints, leaving on
  734. [ 4.803180] axp20_ldo4: incomplete constraints, leaving on
  735. [ 4.809793] axp20_ldo3: incomplete constraints, leaving on
  736. [ 4.816351] axp20_ldo2: incomplete constraints, leaving on
  737. [ 4.823059] axp20_ldo1: incomplete constraints, leaving on
  738. [ 4.829662] sunxi_rtc_gettime, line 39
  739. [ 4.833970] sunxi_rtc_gettime(59): rtc_tm->tm_year:0
  740. [ 4.839685] sunxi_rtc_gettime(61): year < 70, so add 100, to check
  741. [ 4.846690] sunxi_rtc_gettime(67): read time 2000-1-1 0:0:7
  742. [ 4.853099] sunxi-rtc sunxi-rtc: setting system clock to 2000-01-01 00:00:07 UTC (946684807)
  743. [ 4.862774] ALSA device list:
  744. [ 4.866186] #0: Dummy 1
  745. [ 4.869205] #1: Loopback 1
  746. [ 4.872510] #2: Virtual MIDI Card 1
  747. [ 4.876743] #3: sun7i-CODEC Audio Codec
  748. [ 4.881414] #4: sndhdmi
  749. [ 4.884428] #5: sndi2s
  750. [ 4.888758] Freeing init memory: 348K
  751. e2fsck 1.41.14 (22-Dec-2010)
  752. /dev/mmcblk0p7: clean, 939/10240 files, 32278/40960 blocks
  753. [ 5.006850] EXT4-fs (mmcblk0p7): barriers disabled
  754. [ 5.013332] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,barrier=0,data=ordered
  755. e2fsck 1.41.14 (22-Dec-2010)
  756. /dev/mmcblk0p1: recovering journal
  757. Clearing orphaned inode 20 (uid=0, gid=0, mode=010644, size=0)
  758. Clearing orphaned inode 19 (uid=0, gid=0, mode=010644, size=0)
  759. Clearing orphaned inode 18 (uid=0, gid=0, mode=010644, size=0)
  760. Clearing orphaned inode 17 (uid=0, gid=0, mode=010644, size=0)
  761. /dev/mmcblk0p1: clean, 45/202800 files, [ 5.134366] EXT4-fs (mmcblk0p1): barriers disabled
  762. 47372/809984 blocks
  763. [ 5.144363] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,barrier=0,data=ordered
  764. [ 5.166589] EXT4-fs (loop0): couldn't mount as ext3 due to feature incompatibilities
  765. [ 5.179959] EXT4-fs (loop0): couldn't mount as ext2 due to feature incompatibilities
  766. [ 5.205442] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
  767. [ 5.222519] EXT4-fs (loop1): couldn't mount as ext3 due to feature incompatibilities
  768. [ 5.238938] EXT4-fs (loop1): couldn't mount as ext2 due to feature incompatibilities
  769. [ 5.264433] EXT4-fs (loop1): mounted filesystem without journal. Opts: (null)
  770. [ 5.585423] unionfs: remount ignoring option "dirs"
  771. [ 5.590987] unionfs: unionfs: new generation number 2
  772. [ 5.725162] udevd[993]: starting version 182
  773.  
  774. soundcraftui login: [ 5.786798] UMP: UMP device driver 280 loaded
  775. [ 5.789139] wemac wemac.0: eth0: link down
  776. [ 5.789431] ADDRCONF(NETDEV_UP): eth0: link is not ready
  777. [ 5.929511] mali_platform_init(183): get ahb_mali handle success!
  778. [ 5.940839] mali_platform_init(191): get mali handle success!
  779. [ 5.948537] mali_platform_init(198): get ve_pll handle success!
  780. [ 5.955485] mali_platform_init(205): set mali clock source success!
  781. [ 5.962610] mali_platform_init(209): get ve pll rate 336000000!
  782. [ 5.969413] mali_platform_init(212): get mali_para->mali_used success! mali_use 1
  783. [ 5.977981] mali_platform_init(216): get mali_para->mali_clkdiv success! clk_drv 1
  784. [ 5.986656] mali_platform_init(225): mali_clk_div 1
  785. [ 5.992334] mali_platform_init(231): set mali clock rate success!
  786. [ 5.999385] mali_platform_init(237): reset release success!
  787. [ 6.005755] Mali: enable mali clock
  788. [ 6.009963] Mali: sun7i_mali_platform_device_register() sucess!!
  789. [ 6.017088] axp20_buck3: Failed to create debugfs directory
  790. [ 6.024068] mali_freq_init(646): get mali_para->mali_used success! mali_use 1
  791. [ 6.065446] Mali: Mali device driver loaded
  792. [ 7.202947] [uart]: uart5 LCR & BAUD changed, reset controller...
  793. [ 7.210457] umixsrv sets custom speed on ttyS5. This is deprecated.
  794. [ 7.218055] [uart]: uart5 LCR & BAUD changed, reset controller...
  795. [ 7.225385] [uart]: uart5, baud 375000 beyond rance
  796. [ 7.395986] wemac wemac.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
  797. [ 7.408949] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  798. [ 7.569244] [SWITCH] sun7i_sndi2s_hw_params,line:131,audio_format:1,SND_SOC_DAIFMT_DSP_A:4
  799. [ 7.578745] [SWITCH] sun7i_sndi2s_hw_params,line:133,signal_inversion:1,signal_inversion<<8:256,SND_SOC_DAIFMT_IB_NF:768
  800. [ 7.591051] [SWITCH] sun7i_sndi2s_hw_params,line:135,i2s_master:4,i2s_master<<12:16384,SND_SOC_DAIFMT_CBM_CFM:4096
  801. [ 7.602758] play:sun7i_i2sdma.c::func:sun7i_pcm_hw_params(line:261)
  802. [ 13.747074] [AXP]init charger->rest_vol = 100
  803. [ 13.757713] ****************Set_Rset_Cap=100***********
  804. [ 14.581583] unionfs: new lower inode mtime (bindex=1, name=etc)
  805. [ 15.115483] ==> rtl8188e_iol_efuse_patch
  806. [ 15.420465] ADDRCONF(NETDEV_UP): wlan1: link is not ready
  807. [ 20.213804] [SWITCH] sun7i_sndi2s_hw_params,line:131,audio_format:1,SND_SOC_DAIFMT_DSP_A:4
  808. [ 20.223280] [SWITCH] sun7i_sndi2s_hw_params,line:133,signal_inversion:1,signal_inversion<<8:256,SND_SOC_DAIFMT_IB_NF:768
  809. [ 20.235618] [SWITCH] sun7i_sndi2s_hw_params,line:135,i2s_master:4,i2s_master<<12:16384,SND_SOC_DAIFMT_CBM_CFM:4096
  810. [ 20.247392] CAPTUR:sun7i_i2sdma.c::func:sun7i_pcm_hw_params(line:309)
  811. [ 20.256951] CAPTURE DMA_OP_STOP:sun7i-i2sdma.c::func:sun7i_pcm_hw_free(line:410)
  812. [ 20.272794] [SWITCH] sun7i_sndi2s_hw_params,line:131,audio_format:1,SND_SOC_DAIFMT_DSP_A:4
  813. [ 20.282286] [SWITCH] sun7i_sndi2s_hw_params,line:133,signal_inversion:1,signal_inversion<<8:256,SND_SOC_DAIFMT_IB_NF:768
  814. [ 20.294656] [SWITCH] sun7i_sndi2s_hw_params,line:135,i2s_master:4,i2s_master<<12:16384,SND_SOC_DAIFMT_CBM_CFM:4096
  815. [ 20.306415] CAPTUR:sun7i_i2sdma.c::func:sun7i_pcm_hw_params(line:309)
  816. [ 20.315929] CAPTURE DMA_OP_STOP:sun7i-i2sdma.c::func:sun7i_pcm_hw_free(line:410)
  817. [ 20.333892] [SWITCH] sun7i_sndi2s_hw_params,line:131,audio_format:1,SND_SOC_DAIFMT_DSP_A:4
  818. [ 20.343346] [SWITCH] sun7i_sndi2s_hw_params,line:133,signal_inversion:1,signal_inversion<<8:256,SND_SOC_DAIFMT_IB_NF:768
  819. [ 20.355723] [SWITCH] sun7i_sndi2s_hw_params,line:135,i2s_master:4,i2s_master<<12:16384,SND_SOC_DAIFMT_CBM_CFM:4096
  820. [ 20.367473] CAPTUR:sun7i_i2sdma.c::func:sun7i_pcm_hw_params(line:309)
  821.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!