API tools faq
paste
Advertisement
lorforlinux

BBBWL boot log - 7/29/20

lorforlinux
Jul 29th, 2020
77
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.44 KB | None | 0 0
raw download clone embed print report
  1. [ 1916.512683] Bluetooth: hci0: sending frame failed (-49)
  2. [ 1919.786779] watchdog: watchdog0: watchdog did not stop!
  3. [ 1920.188438] reboot: Restarting system
  4.  
  5. U-Boot SPL 2019.04-00002-g07d5700e21 (Mar 06 2020 - 11:24:55 -0600)
  6. Trying to boot from MMC2
  7. Loading Environment from EXT4... ** File not found /boot/uboot.env **
  8.  
  9. ** Unable to read "/boot/uboot.env" from mmc0:1 **
  10.  
  11.  
  12. U-Boot 2019.04-00002-g07d5700e21 (Mar 06 2020 - 11:24:55 -0600), Build: jenkins-github_Bootloader-Builder-137
  13.  
  14. CPU : AM335X-GP rev 2.1
  15. I2C: ready
  16. DRAM: 512 MiB
  17. No match for driver 'omap_hsmmc'
  18. No match for driver 'omap_hsmmc'
  19. Some drivers were not found
  20. Reset Source: Global warm SW reset has occurred.
  21. Reset Source: Power-on reset has occurred.
  22. RTC 32KCLK Source: External.
  23. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  24. Loading Environment from EXT4... ** File not found /boot/uboot.env **
  25.  
  26. ** Unable to read "/boot/uboot.env" from mmc0:1 **
  27. Board: BeagleBone Black
  28. <ethaddr> not set. Validating first E-fuse MAC
  29. BeagleBone Black:
  30. Model: BeagleBoard.org BeagleBone Black Wireless:
  31. BeagleBone: cape eeprom: i2c_probe: 0x54:
  32. BeagleBone: cape eeprom: i2c_probe: 0x55:
  33. BeagleBone: cape eeprom: i2c_probe: 0x56:
  34. BeagleBone: cape eeprom: i2c_probe: 0x57:
  35. Net: eth0: MII MODE
  36. Could not get PHY for cpsw: addr 0
  37. cpsw, usb_ether
  38. Press SPACE to abort autoboot in 0 seconds
  39. board_name=[BBBW] ...
  40. switch to partitions #0, OK
  41. mmc0 is current device
  42. SD/MMC found on device 0
  43. switch to partitions #0, OK
  44. mmc0 is current device
  45. Scanning mmc 0:1...
  46. gpio: pin 56 (gpio 56) value is 0
  47. gpio: pin 55 (gpio 55) value is 0
  48. gpio: pin 54 (gpio 54) value is 0
  49. gpio: pin 53 (gpio 53) value is 1
  50. switch to partitions #0, OK
  51. mmc0 is current device
  52. gpio: pin 54 (gpio 54) value is 1
  53. Checking for: /uEnv.txt ...
  54. Checking for: /boot.scr ...
  55. Checking for: /boot/boot.scr ...
  56. Checking for: /boot/uEnv.txt ...
  57. gpio: pin 55 (gpio 55) value is 1
  58. 2153 bytes read in 68 ms (30.3 KiB/s)
  59. Loaded environment from /boot/uEnv.txt
  60. Checking if uname_r is set in /boot/uEnv.txt...
  61. gpio: pin 56 (gpio 56) value is 1
  62. Running uname_boot ...
  63. loading /boot/vmlinuz-5.4.52-ti-r15 ...
  64. 10002944 bytes read in 733 ms (13 MiB/s)
  65. debug: [enable_uboot_overlays=1] ...
  66. debug: [enable_uboot_cape_universal=1] ...
  67. debug: [uboot_base_dtb_univ=am335x-boneblack-uboot-univ.dtb] ...
  68. uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot-univ.dtb] ...
  69. uboot_overlays: Switching too: dtb=am335x-boneblack-uboot-univ.dtb ...
  70. loading /boot/dtbs/5.4.52-ti-r15/am335x-boneblack-uboot-univ.dtb ...
  71. 212800 bytes read in 122 ms (1.7 MiB/s)
  72. uboot_overlays: [fdt_buffer=0x60000] ...
  73. uboot_overlays: uboot loading of [/lib/firmware/BB-ADC-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_adc=1]...
  74. uboot_overlays: unable to find [mmc 0:1 BB-SPIDEV0-00A0.dtbo]...
  75. uboot_overlays: unable to find [mmc 0:1 BB-SPIDEV1-00A0.dtbo]...
  76. uboot_overlays: uboot loading of [/lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_emmc=1]...
  77. uboot_overlays: uboot loading of [/lib/firmware/BB-HDMI-TDA998x-00A0.dtbo] disabled by /boot/uEnv.txt [disable_uboot_overlay_video=1]...
  78. uboot_overlays: loading /lib/firmware/BB-BBBW-WL1835-00A0.dtbo ...
  79. 4156 bytes read in 2546 ms (1000 Bytes/s)
  80. uboot_overlays: loading /lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ...
  81. 3801 bytes read in 1664 ms (2 KiB/s)
  82. loading /boot/initrd.img-5.4.52-ti-r15 ...
  83. 6858833 bytes read in 551 ms (11.9 MiB/s)
  84. debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj.
  85. debug: [bootz 0x82000000 0x88080000:68a851 88000000] ...
  86. ## Flattened Device Tree blob at 88000000
  87. Booting using the fdt blob at 0x88000000
  88. Loading Ramdisk to 8f975000, end 8ffff851 ... OK
  89. Loading Device Tree to 8f8dc000, end 8f974fff ... OK
  90.  
  91. Starting kernel ...
  92.  
  93. [ 0.002645] timer_probe: no matching timers found
  94. [ 0.217985] l3-aon-clkctrl:0000:0: failed to disable
  95. [ 0.310636] debugfs: Directory '49000000.edma' with parent 'dmaengine' already present!
  96. [ 1.761101] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
  97. [ 2.317542] omap_voltage_late_init: Voltage driver support not added
  98. [ 2.324908] PM: Cannot get wkup_m3_ipc handle
  99. rootfs: clean, 101703/230144 files, 621487/920576 blocks
  100. [FAILED] Failed to start Load Kernel Modules.
  101. See 'systemctl status systemd-modules-load.service' for details.
  102. [DEPEND] Dependency failed for robotcontrol.
  103. [ OK ] Mounted POSIX Message Queue File System.
  104. [ OK ] Mounted /sys/kernel/debug.
  105. [ OK ] Started Create list of req��… nodes for the current kernel.
  106. Starting Apply Kernel Variables...
  107. Mounting FUSE Control File System...
  108. Mounting Kernel Configuration File System...
  109. [ OK ] Started Remount Root and Kernel File Systems.
  110. [ OK ] Started Apply Kernel Variables.
  111. [ OK ] Mounted FUSE Control File System.
  112. [ OK ] Mounted Kernel Configuration File System.
  113. Starting Load/Save Random Seed...
  114. Starting Create System Users...
  115. [ OK ] Started Journal Service.
  116. Starting Flush Journal to Persistent Storage...
  117. [ OK ] Started Load/Save Random Seed.
  118. [ OK ] Started Create System Users.
  119. Starting Create Static Device Nodes in /dev...
  120. [ OK ] Started Flush Journal to Persistent Storage.
  121. [ OK ] Started Create Static Device Nodes in /dev.
  122. Starting udev Kernel Device Manager...
  123. [ OK ] Reached target Local File Systems (Pre).
  124. [ OK ] Reached target Local File Systems.
  125. Starting Create Volatile Files and Directories...
  126. [ OK ] Started udev Kernel Device Manager.
  127. [ OK ] Started Create Volatile Files and Directories.
  128. [ OK ] Started Entropy daemon using the HAVEGE algorithm.
  129. Starting Update UTMP about System Boot/Shutdown...
  130. Starting Network Time Synchronization...
  131. [ OK ] Started Update UTMP about System Boot/Shutdown.
  132. [ OK ] Started Network Time Synchronization.
  133. [ OK ] Reached target System Time Synchronized.
  134. [ OK ] Started udev Coldplug all Devices.
  135. Starting Helper to synchronize boot up for ifupdown...
  136. [ OK ] Reached target System Initialization.
  137. [ OK ] Listening on D-Bus System Message Bus Socket.
  138. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  139. [ OK ] Listening on bonescript.socket.
  140. [ OK ] Listening on Cloud9 Socket.
  141. [ OK ] Started Daily Cleanup of Temporary Directories.
  142. [ OK ] Started Daily rotation of log files.
  143. [ OK ] Reached target Timers.
  144. [ OK ] Listening on Node-RED Socket.
  145. [ OK ] Reached target Sockets.
  146. [ OK ] Reached target Basic System.
  147. [ OK ] Started D-Bus System Message Bus.
  148. Starting Connection service...
  149. Starting rc_battery_monitor...
  150. Starting LSB: Load kernel ��…d to enable cpufreq scaling...
  151. Starting BB WL18xx wlan0 Service...
  152. Starting Avahi mDNS/DNS-SD Stack...
  153. [ OK ] Started Bonescript autorun.
  154. [ OK ] Started Regular background program processing daemon.
  155. Starting Login Service...
  156. Starting System Logging Service...
  157. Starting WPA supplicant...
  158. [ OK ] Started Helper to synchronize boot up for ifupdown.
  159. [ OK ] Started rc_battery_monitor.
  160. [ OK ] Started System Logging Service.
  161. [ OK ] Started WPA supplicant.
  162. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  163. Starting Raise network interfaces...
  164. [ OK ] Started Login Service.
  165. [ OK ] Started Connection service.
  166. Starting Hostname Service...
  167. [ OK ] Started LSB: Load kernel m��…ded to enable cpufreq scaling.
  168. Starting LSB: set CPUFreq kernel parameters...
  169. [ OK ] Started Raise network interfaces.
  170. [ OK ] Reached target Network.
  171. Starting A high performanc��… and a reverse proxy server...
  172. Starting Permit User Sessions...
  173. Starting OpenBSD Secure Shell server...
  174. Starting Generic Board Startup...
  175. [ OK ] Started Permit User Sessions.
  176. [ OK ] Started Getty on tty1.
  177. [ OK ] Started LSB: set CPUFreq kernel parameters.
  178. [ OK ] Started Hostname Service.
  179. [ OK ] Started OpenBSD Secure Shell server.
  180. [ OK ] Started A high performance��…er and a reverse proxy server.
  181. [ OK ] Found device /dev/ttyS0.
  182. [ OK ] Started Serial Getty on ttyS0.
  183.  
  184. Debian GNU/Linux 10 beaglebone ttyS0
  185.  
  186. BeagleBoard.org Debian Buster IoT Image 2020-04-06
  187.  
  188. Support: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian
  189.  
  190. default username:password is [debian:temppwd]
  191.  
  192. beaglebone login:
  193.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!