API tools faq
paste
Guest User

sudo smartctl /dev/sdc -a

a guest
Nov 20th, 2021
436
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.68 KB | None | 0 0
raw download clone embed print report
  1. sudo smartctl /dev/sdc -a
  2.  
  3.  
  4. smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-162-generic] (local build)
  5. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  6.  
  7. === START OF INFORMATION SECTION ===
  8. Device Model: ST14000NE0008-2RX103
  9. Serial Number: ZL2KZ9SG
  10. LU WWN Device Id: 5 000c50 0dc36e567
  11. Firmware Version: EN02
  12. User Capacity: 14,000,519,643,136 bytes [14.0 TB]
  13. Sector Sizes: 512 bytes logical, 4096 bytes physical
  14. Rotation Rate: 7200 rpm
  15. Form Factor: 3.5 inches
  16. Device is: Not in smartctl database [for details use: -P showall]
  17. ATA Version is: Unknown(0x0fe0) (minor revision not indicated)
  18. SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 3.0 Gb/s)
  19. Local Time is: Sat Nov 20 06:10:58 2021 UTC
  20. SMART support is: Available - device has SMART capability.
  21. SMART support is: Enabled
  22.  
  23. === START OF READ SMART DATA SECTION ===
  24. SMART overall-health self-assessment test result: PASSED
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x82) Offline data collection activity
  28. was completed without error.
  29. Auto Offline Data Collection: Enabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: ( 567) seconds.
  35. Offline data collection
  36. capabilities: (0x7b) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 1) minutes.
  51. Extended self-test routine
  52. recommended polling time: (1237) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 2) minutes.
  55. SCT capabilities: (0x50bd) SCT Status supported.
  56. SCT Error Recovery Control supported.
  57. SCT Feature Control supported.
  58. SCT Data Table supported.
  59.  
  60. SMART Attributes Data Structure revision number: 10
  61. Vendor Specific SMART Attributes with Thresholds:
  62. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  63. 1 Raw_Read_Error_Rate 0x000f 080 064 044 Pre-fail Always - 99953200
  64. 3 Spin_Up_Time 0x0003 091 089 000 Pre-fail Always - 0
  65. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10
  66. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
  67. 7 Seek_Error_Rate 0x000f 078 060 045 Pre-fail Always - 67583476
  68. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 192
  69. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  70. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 6
  71. 18 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0
  72. 187 Reported_Uncorrect 0x0032 092 092 000 Old_age Always - 8
  73. 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
  74. 190 Airflow_Temperature_Cel 0x0022 054 043 040 Old_age Always - 46 (Min/Max 46/47)
  75. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3
  76. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 66
  77. 194 Temperature_Celsius 0x0022 046 057 000 Old_age Always - 46 (0 20 0 0 0)
  78. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
  79. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
  80. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  81. 200 Multi_Zone_Error_Rate 0x0023 100 100 001 Pre-fail Always - 0
  82. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 174 (149 132 0)
  83. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 109376416907
  84. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 136730921975
  85.  
  86. SMART Error Log Version: 1
  87. ATA Error Count: 8 (device log contains only the most recent five errors)
  88. CR = Command Register [HEX]
  89. FR = Features Register [HEX]
  90. SC = Sector Count Register [HEX]
  91. SN = Sector Number Register [HEX]
  92. CL = Cylinder Low Register [HEX]
  93. CH = Cylinder High Register [HEX]
  94. DH = Device/Head Register [HEX]
  95. DC = Device Command Register [HEX]
  96. ER = Error register [HEX]
  97. ST = Status register [HEX]
  98. Powered_Up_Time is measured from power on, and printed as
  99. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  100. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  101.  
  102. Error 8 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
  103. When the command that caused the error occurred, the device was active or idle.
  104.  
  105. After command completion occurred, registers were:
  106. ER ST SC SN CL CH DH
  107. -- -- -- -- -- -- --
  108. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  109.  
  110. Commands leading to the command that caused the error were:
  111. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  112. -- -- -- -- -- -- -- -- ---------------- --------------------
  113. 60 00 08 ff ff ff 4f 00 4d+15:27:29.318 READ FPDMA QUEUED
  114. 60 00 08 ff ff ff 4f 00 4d+15:27:25.819 READ FPDMA QUEUED
  115. 60 00 08 ff ff ff 4f 00 4d+15:27:22.211 READ FPDMA QUEUED
  116. 60 00 08 ff ff ff 4f 00 4d+15:27:18.620 READ FPDMA QUEUED
  117. 60 00 08 ff ff ff 4f 00 4d+15:27:14.755 READ FPDMA QUEUED
  118.  
  119. Error 7 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
  120. When the command that caused the error occurred, the device was active or idle.
  121.  
  122. After command completion occurred, registers were:
  123. ER ST SC SN CL CH DH
  124. -- -- -- -- -- -- --
  125. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  126.  
  127. Commands leading to the command that caused the error were:
  128. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  129. -- -- -- -- -- -- -- -- ---------------- --------------------
  130. 60 00 08 ff ff ff 4f 00 4d+15:26:50.710 READ FPDMA QUEUED
  131. 60 00 08 ff ff ff 4f 00 4d+15:26:46.827 READ FPDMA QUEUED
  132. 60 00 08 ff ff ff 4f 00 4d+15:26:43.012 READ FPDMA QUEUED
  133. 60 00 08 ff ff ff 4f 00 4d+15:26:39.229 READ FPDMA QUEUED
  134. 60 00 08 ff ff ff 4f 00 4d+15:26:35.371 READ FPDMA QUEUED
  135.  
  136. Error 6 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
  137. When the command that caused the error occurred, the device was active or idle.
  138.  
  139. After command completion occurred, registers were:
  140. ER ST SC SN CL CH DH
  141. -- -- -- -- -- -- --
  142. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  143.  
  144. Commands leading to the command that caused the error were:
  145. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  146. -- -- -- -- -- -- -- -- ---------------- --------------------
  147. 60 00 08 ff ff ff 4f 00 4d+15:26:30.481 READ FPDMA QUEUED
  148. 60 00 08 ff ff ff 4f 00 4d+15:26:26.365 READ FPDMA QUEUED
  149. 60 00 08 ff ff ff 4f 00 4d+15:26:22.441 READ FPDMA QUEUED
  150. 60 00 08 ff ff ff 4f 00 4d+15:26:18.642 READ FPDMA QUEUED
  151. 60 00 08 ff ff ff 4f 00 4d+15:26:14.668 READ FPDMA QUEUED
  152.  
  153. Error 5 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
  154. When the command that caused the error occurred, the device was active or idle.
  155.  
  156. After command completion occurred, registers were:
  157. ER ST SC SN CL CH DH
  158. -- -- -- -- -- -- --
  159. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  160.  
  161. Commands leading to the command that caused the error were:
  162. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  163. -- -- -- -- -- -- -- -- ---------------- --------------------
  164. 60 00 08 ff ff ff 4f 00 4d+15:25:38.409 READ FPDMA QUEUED
  165. 60 00 08 ff ff ff 4f 00 4d+15:25:34.618 READ FPDMA QUEUED
  166. 47 00 01 13 00 00 a0 00 4d+15:25:34.605 READ LOG DMA EXT
  167. 47 00 01 00 00 00 a0 00 4d+15:25:34.605 READ LOG DMA EXT
  168. ef 10 02 00 00 00 a0 00 4d+15:25:34.585 SET FEATURES [Enable SATA feature]
  169.  
  170. Error 4 occurred at disk power-on lifetime: 154 hours (6 days + 10 hours)
  171. When the command that caused the error occurred, the device was active or idle.
  172.  
  173. After command completion occurred, registers were:
  174. ER ST SC SN CL CH DH
  175. -- -- -- -- -- -- --
  176. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  177.  
  178. Commands leading to the command that caused the error were:
  179. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  180. -- -- -- -- -- -- -- -- ---------------- --------------------
  181. 60 00 08 ff ff ff 4f 00 4d+15:25:31.202 READ FPDMA QUEUED
  182. 60 00 08 ff ff ff 4f 00 4d+15:25:31.194 READ FPDMA QUEUED
  183. 47 00 01 13 00 00 a0 00 4d+15:25:31.181 READ LOG DMA EXT
  184. 47 00 01 00 00 00 a0 00 4d+15:25:31.181 READ LOG DMA EXT
  185. ef 10 02 00 00 00 a0 00 4d+15:25:31.161 SET FEATURES [Enable SATA feature]
  186.  
  187. SMART Self-test log structure revision number 1
  188. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  189. # 1 Short offline Completed without error 00% 0 -
  190.  
  191. SMART Selective self-test log data structure revision number 1
  192. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  193. 1 0 0 Not_testing
  194. 2 0 0 Not_testing
  195. 3 0 0 Not_testing
  196. 4 0 0 Not_testing
  197. 5 0 0 Not_testing
  198. Selective self-test flags (0x0):
  199. After scanning selected spans, do NOT read-scan remainder of disk.
  200. If Selective self-test is pending on power-up, resume after 0 minute delay.
  201.  
  202. mike@manitoba:~$
  203.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!