API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 31st, 2017
199
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.56 KB | None | 0 0
raw download clone embed print report
  1. pi@raspberrypi:~$ sudo hostapd -d /etc/hostapd/hostapd.conf
  2. random: Trying to read entropy from /dev/random
  3. Configuration file: /etc/hostapd/hostapd.conf
  4. HT (IEEE 802.11n) with WPA/WPA2 requires CCMP/GCMP to be enabled, disabling HT capabilities
  5. rfkill: initial event: idx=4 type=1 op=0 soft=0 hard=0
  6. nl80211: Supported cipher 00-0f-ac:1
  7. nl80211: Supported cipher 00-0f-ac:5
  8. nl80211: Supported cipher 00-0f-ac:2
  9. nl80211: Supported cipher 00-0f-ac:4
  10. nl80211: Supported cipher 00-0f-ac:10
  11. nl80211: Supported cipher 00-0f-ac:8
  12. nl80211: Supported cipher 00-0f-ac:9
  13. nl80211: Using driver-based off-channel TX
  14. nl80211: interface wlan0 in phy phy4
  15. nl80211: Set mode ifindex 7 iftype 3 (AP)
  16. nl80211: Failed to set interface 7 to mode 3: -16 (Device or resource busy)
  17. nl80211: Try mode change after setting interface down
  18. nl80211: Set mode ifindex 7 iftype 3 (AP)
  19. nl80211: Mode change succeeded while interface is down
  20. nl80211: Setup AP(wlan0) - device_ap_sme=0 use_monitor=0
  21. nl80211: Subscribe to mgmt frames with AP handle 0x7f9fe0f8
  22. nl80211: Register frame type=0xb0 (WLAN_FC_STYPE_AUTH) nl_handle=0x7f9fe0f8 match=
  23. nl80211: Register frame type=0x0 (WLAN_FC_STYPE_ASSOC_REQ) nl_handle=0x7f9fe0f8 match=
  24. nl80211: Register frame type=0x20 (WLAN_FC_STYPE_REASSOC_REQ) nl_handle=0x7f9fe0f8 match=
  25. nl80211: Register frame type=0xa0 (WLAN_FC_STYPE_DISASSOC) nl_handle=0x7f9fe0f8 match=
  26. nl80211: Register frame type=0xc0 (WLAN_FC_STYPE_DEAUTH) nl_handle=0x7f9fe0f8 match=
  27. nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x7f9fe0f8 match=
  28. nl80211: Register frame type=0x40 (WLAN_FC_STYPE_PROBE_REQ) nl_handle=0x7f9fe0f8 match=
  29. nl80211: Add own interface ifindex 7
  30. nl80211: if_indices[16]: 7
  31. phy: phy4
  32. BSS count 1, BSSID mask 00:00:00:00:00:00 (0 bits)
  33. nl80211: Regulatory information - country=DK (DFS-ETSI)
  34. nl80211: 2402-2482 @ 40 MHz 20 mBm
  35. nl80211: 5170-5250 @ 80 MHz 20 mBm
  36. nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS)
  37. nl80211: 5490-5710 @ 160 MHz 27 mBm (DFS)
  38. nl80211: 57000-66000 @ 2160 MHz 40 mBm
  39. nl80211: Added 802.11b mode based on 802.11g information
  40. hw vht capab: 0x0, conf vht capab: 0x0
  41. Completing interface initialization
  42. Mode: IEEE 802.11g Channel: 1 Frequency: 2412 MHz
  43. DFS 0 channels required radar detection
  44. nl80211: Set freq 2412 (ht_enabled=1, vht_enabled=0, bandwidth=20 MHz, cf1=2412 MHz, cf2=0 MHz)
  45. RATE[0] rate=10 flags=0x1
  46. RATE[1] rate=20 flags=0x1
  47. RATE[2] rate=55 flags=0x1
  48. RATE[3] rate=110 flags=0x1
  49. RATE[4] rate=60 flags=0x0
  50. RATE[5] rate=90 flags=0x0
  51. RATE[6] rate=120 flags=0x0
  52. RATE[7] rate=180 flags=0x0
  53. RATE[8] rate=240 flags=0x0
  54. RATE[9] rate=360 flags=0x0
  55. RATE[10] rate=480 flags=0x0
  56. RATE[11] rate=540 flags=0x0
  57. hostapd_setup_bss(hapd=0x7f9fd608 (wlan0), first=1)
  58. wlan0: Flushing old station entries
  59. nl80211: flush -> DEL_STATION wlan0 (all)
  60. wlan0: Deauthenticate all stations
  61. nl80211: send_mlme - da= ff:ff:ff:ff:ff:ff noack=0 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0xc0 (WLAN_FC_STYPE_DEAUTH) nlmode=3
  62. nl80211: send_mlme -> send_frame
  63. nl80211: send_frame - Use bss->freq=2412
  64. nl80211: send_frame -> send_frame_cmd
  65. nl80211: Frame command failed: ret=-16 (Device or resource busy) (freq=2412 wait=0)
  66. wpa_driver_nl80211_set_key: ifindex=7 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
  67. wpa_driver_nl80211_set_key: ifindex=7 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
  68. wpa_driver_nl80211_set_key: ifindex=7 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
  69. wpa_driver_nl80211_set_key: ifindex=7 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
  70. Using interface wlan0 with hwaddr 00:c1:41:06:06:96 and ssid "dumbass3"
  71. Deriving WPA PSK based on passphrase
  72. SSID - hexdump_ascii(len=8):
  73. 64 75 6d 62 61 73 73 33 dumbass3
  74. PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
  75. PSK (from passphrase) - hexdump(len=32): [REMOVED]
  76. random: Got 20/20 bytes from /dev/random
  77. GMK - hexdump(len=32): [REMOVED]
  78. Key Counter - hexdump(len=32): [REMOVED]
  79. WPA: Delay group state machine start until Beacon frames have been configured
  80. nl80211: Set beacon (beacon_set=0)
  81. nl80211: Beacon head - hexdump(len=59): 80 00 00 00 ff ff ff ff ff ff 00 c1 41 06 06 96 00 c1 41 06 06 96 00 00 00 00 00 00 00 00 00 00 64 00 11 04 00 08 64 75 6d 62 61 73 73 33 01 08 82 84 8b 96 0c 12 18 24 03 01 01
  82. nl80211: Beacon tail - hexdump(len=67): 2a 01 04 32 04 30 48 60 6c 30 14 01 00 00 0f ac 02 01 00 00 0f ac 02 01 00 00 0f ac 02 0c 00 7f 08 00 00 00 02 00 00 00 40 dd 18 00 50 f2 02 01 01 00 00 03 a4 00 00 27 a4 00 00 42 43 5e 00 62 32 2f 00
  83. nl80211: ifindex=7
  84. nl80211: beacon_int=100
  85. nl80211: dtim_period=2
  86. nl80211: ssid - hexdump_ascii(len=8):
  87. 64 75 6d 62 61 73 73 33 dumbass3
  88. nl80211: hidden SSID not in use
  89. nl80211: privacy=1
  90. nl80211: auth_algs=0x3
  91. nl80211: wpa_version=0x2
  92. nl80211: key_mgmt_suites=0x2
  93. nl80211: pairwise_ciphers=0x8
  94. nl80211: group_cipher=0x8
  95. nl80211: beacon_ies - hexdump(len=10): 7f 08 00 00 00 02 00 00 00 40
  96. nl80211: proberesp_ies - hexdump(len=10): 7f 08 00 00 00 02 00 00 00 40
  97. nl80211: assocresp_ies - hexdump(len=10): 7f 08 00 00 00 02 00 00 00 40
  98. WPA: Start group state machine to set initial keys
  99. WPA: group state machine entering state GTK_INIT (VLAN-ID 0)
  100. GTK - hexdump(len=32): [REMOVED]
  101. WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0)
  102. wpa_driver_nl80211_set_key: ifindex=7 (wlan0) alg=2 addr=0x7f61b358 key_idx=1 set_tx=1 seq_len=0 key_len=32
  103. nl80211: KEY_DATA - hexdump(len=32): [REMOVED]
  104. broadcast key
  105. nl80211: Set wlan0 operstate 0->1 (UP)
  106. netlink: Operstate: ifindex=7 linkmode=-1 (no change), operstate=6 (IF_OPER_UP)
  107. wlan0: interface state UNINITIALIZED->ENABLED
  108. wlan0: AP-ENABLED
  109. wlan0: Setup of interface done.
  110. ctrl_iface not configured!
  111. RTM_NEWLINK: ifi_index=7 ifname=wlan0 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1002 ()
  112. nl80211: Ignore interface down event since interface wlan0 is up
  113. RTM_NEWLINK: ifi_index=7 ifname=wlan0 operstate=2 linkmode=0 ifi_family=0 ifi_flags=0x1003 ([UP])
  114. RTM_NEWLINK: ifi_index=7 ifname=wlan0 operstate=6 linkmode=0 ifi_family=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
  115. VLAN: vlan_newlink(wlan0)
  116. nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0
  117. nl80211: RX frame sa=00:5a:13:8d:69:6c freq=2412 ssi_signal=-79 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=205
  118. nl80211: send_mlme - da= 00:5a:13:8d:69:6c noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 (WLAN_FC_STYPE_PROBE_RESP) nlmode=3
  119. nl80211: send_mlme -> send_frame
  120. nl80211: send_frame - Use bss->freq=2412
  121. nl80211: send_frame -> send_frame_cmd
  122. nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0
  123. nl80211: RX frame sa=ac:e0:10:e0:06:bc freq=2412 ssi_signal=-33 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=70
  124. nl80211: send_mlme - da= ac:e0:10:e0:06:bc noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 (WLAN_FC_STYPE_PROBE_RESP) nlmode=3
  125. nl80211: send_mlme -> send_frame
  126. nl80211: send_frame - Use bss->freq=2412
  127. nl80211: send_frame -> send_frame_cmd
  128. nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0
  129. nl80211: RX frame sa=ac:e0:10:e0:06:bc freq=2412 ssi_signal=-33 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=70
  130. nl80211: send_mlme - da= ac:e0:10:e0:06:bc noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 (WLAN_FC_STYPE_PROBE_RESP) nlmode=3
  131. nl80211: send_mlme -> send_frame
  132. nl80211: send_frame - Use bss->freq=2412
  133. nl80211: send_frame -> send_frame_cmd
  134. nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0
  135. nl80211: RX frame sa=54:79:75:3e:02:28 freq=2412 ssi_signal=-71 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=70
  136. nl80211: send_mlme - da= 54:79:75:3e:02:28 noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 (WLAN_FC_STYPE_PROBE_RESP) nlmode=3
  137. nl80211: send_mlme -> send_frame
  138. nl80211: send_frame - Use bss->freq=2412
  139. nl80211: send_frame -> send_frame_cmd
  140. nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0
  141. nl80211: RX frame sa=00:5a:13:8d:69:6c freq=2412 ssi_signal=-71 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=205
  142. nl80211: send_mlme - da= 00:5a:13:8d:69:6c noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 (WLAN_FC_STYPE_PROBE_RESP) nlmode=3
  143. nl80211: send_mlme -> send_frame
  144. nl80211: send_frame - Use bss->freq=2412
  145. nl80211: send_frame -> send_frame_cmd
  146. nl80211: BSS Event 59 (NL80211_CMD_FRAME) received for wlan0
  147. nl80211: RX frame sa=00:5a:13:8d:69:6c freq=2412 ssi_signal=-77 stype=4 (WLAN_FC_STYPE_PROBE_REQ) len=205
  148. nl80211: send_mlme - da= 00:5a:13:8d:69:6c noack=1 freq=0 no_cck=0 offchanok=0 wait_time=0 fc=0x50 (WLAN_FC_STYPE_PROBE_RESP) nlmode=3
  149. nl80211: send_mlme -> send_frame
  150. nl80211: send_frame - Use bss->freq=2412
  151. nl80211: send_frame -> send_frame_cmd
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!