Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- debian@nitrogen:~$ cat /var/log/Xorg.0.log
- [ 9.836]
- X.Org X Server 1.19.2
- Release Date: 2017-03-02
- [ 9.836] X Protocol Version 11, Revision 0
- [ 9.836] Build Operating System: Linux 4.1.15-14-boundary-12s armv7l Debian
- [ 9.836] Current Operating System: Linux nitrogen 4.9.74-2-boundary-14s #1 SMP PREEMPT Debian 4.9.74-2.2 (2018-01-04) armv7l
- [ 9.836] Kernel command line: console=ttymxc1,115200 vmalloc=400M consoleblank=0 rootwait fixrtc cpu=6Q board=nitrogen6_max mxc_hdmi.only_cea=1 root=/dev/mmcblk0p1 wlcore.mac=00:19:B8:03:9D:33 splash plymouth.ignore-serial-consoles loglevel=4 reset_cause=0x1
- [ 9.837] Build Date: 28 March 2017 03:10:13AM
- [ 9.837] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
- [ 9.837] Current version of pixman: 0.34.0
- [ 9.837] Before reporting problems, check http://wiki.x.org
- to make sure that you have the latest version.
- [ 9.837] Markers: (--) probed, (**) from config file, (==) default setting,
- (++) from command line, (!!) notice, (II) informational,
- (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
- [ 9.838] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 24 11:24:51 2018
- [ 9.861] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
- [ 9.867] (==) No Layout section. Using the first Screen section.
- [ 9.867] (==) No screen section available. Using defaults.
- [ 9.867] (**) |-->Screen "Default Screen Section" (0)
- [ 9.868] (**) | |-->Monitor "<default monitor>"
- [ 9.869] (==) No device specified for screen "Default Screen Section".
- Using the first device section listed.
- [ 9.869] (**) | |-->Device "i.MX Accelerated Framebuffer Device"
- [ 9.869] (==) No monitor specified for screen "Default Screen Section".
- Using a default monitor configuration.
- [ 9.870] (**) Option "BlankTime" "0"
- [ 9.870] (**) Option "StandbyTime" "0"
- [ 9.870] (**) Option "SuspendTime" "0"
- [ 9.870] (**) Option "OffTime" "0"
- [ 9.871] (==) Automatically adding devices
- [ 9.871] (==) Automatically enabling devices
- [ 9.871] (==) Automatically adding GPU devices
- [ 9.871] (==) Max clients allowed: 256, resource mask: 0x1fffff
- [ 9.882] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
- [ 9.883] Entry deleted from font path.
- [ 9.908] (==) FontPath set to:
- /usr/share/fonts/X11/misc,
- /usr/share/fonts/X11/100dpi/:unscaled,
- /usr/share/fonts/X11/75dpi/:unscaled,
- /usr/share/fonts/X11/Type1,
- /usr/share/fonts/X11/100dpi,
- /usr/share/fonts/X11/75dpi,
- built-ins
- [ 9.908] (==) ModulePath set to "/usr/lib/xorg/modules"
- [ 9.908] (II) The server relies on udev to provide the list of input devices.
- If no devices become available, reconfigure udev or disable AutoAddDevices.
- [ 9.908] (II) Loader magic: 0x638f60
- [ 9.908] (II) Module ABI versions:
- [ 9.908] X.Org ANSI C Emulation: 0.4
- [ 9.909] X.Org Video Driver: 23.0
- [ 9.909] X.Org XInput driver : 24.1
- [ 9.909] X.Org Server Extension : 10.0
- [ 9.914] (++) using VT number 7
- [ 9.914] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
- [ 9.918] (II) xfree86: Adding drm device (/dev/dri/card0)
- [ 9.920] (II) no primary bus or device found
- [ 9.920] falling back to /sys/devices/platform/Vivante GCCore/drm/card0
- [ 9.920] (II) LoadModule: "glx"
- [ 9.928] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
- [ 10.004] (II) Module glx: vendor="X.Org Foundation"
- [ 10.004] compiled for 1.19.2, module version = 1.0.0
- [ 10.004] ABI class: X.Org Server Extension, version 10.0
- [ 10.005] (II) LoadModule: "vivante"
- [ 10.005] (II) Loading /usr/lib/xorg/modules/drivers/vivante_drv.so
- [ 10.013] (II) Module vivante: vendor="X.Org Foundation"
- [ 10.013] compiled for 1.19.2, module version = 1.0.0
- [ 10.013] ABI class: X.Org Video Driver, version 23.0
- [ 10.013] (II) VIVANTE: fb driver for vivante: VivanteGC500, VivanteGC2100,
- VivanteGCCORE
- [ 10.032] (WW) Falling back to old probe method for vivante
- [ 10.032] (II) Loading sub module "fbdevhw"
- [ 10.032] (II) LoadModule: "fbdevhw"
- [ 10.033] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
- [ 10.037] (II) Module fbdevhw: vendor="X.Org Foundation"
- [ 10.037] compiled for 1.19.2, module version = 0.0.2
- [ 10.037] ABI class: X.Org Video Driver, version 23.0
- [ 10.037] (II) VIVANTE(0): using default device
- [ 10.037] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
- [ 10.038] (II) VIVANTE(0): Device preferred mode 'fb0':U:1024x768p-60
- [ 10.038] (II) VIVANTE(0): Creating default Display subsection in Screen section
- "Default Screen Section" for depth/fbbpp 24/32
- [ 10.038] (==) VIVANTE(0): Depth 24, (==) framebuffer bpp 32
- [ 10.038] (==) VIVANTE(0): RGB weight 888
- [ 10.038] (==) VIVANTE(0): Default visual is TrueColor
- [ 10.038] (==) VIVANTE(0): Using gamma correction (1.0, 1.0, 1.0)
- [ 10.038] (**) VIVANTE(0): mExaHwType:1
- [ 10.038] (II) VIVANTE(0): checking modes against framebuffer device...
- [ 10.038] (II) VIVANTE(0): checking modes against monitor...
- [ 10.039] (--) VIVANTE(0): Virtual size is 0x0 (pitch 0)
- [ 10.039] (==) VIVANTE(0): DPI set to (96, 96)
- [ 10.039] (II) Loading sub module "fb"
- [ 10.039] (II) LoadModule: "fb"
- [ 10.039] (II) Loading /usr/lib/xorg/modules/libfb.so
- [ 10.049] (II) Module fb: vendor="X.Org Foundation"
- [ 10.049] compiled for 1.19.2, module version = 1.0.0
- [ 10.049] ABI class: X.Org ANSI C Emulation, version 0.4
- [ 10.049] (II) Loading sub module "exa"
- [ 10.049] (II) LoadModule: "exa"
- [ 10.050] (II) Loading /usr/lib/xorg/modules/libexa.so
- [ 10.055] (II) Module exa: vendor="X.Org Foundation"
- [ 10.055] compiled for 1.19.2, module version = 2.6.0
- [ 10.056] ABI class: X.Org Video Driver, version 23.0
- [ 10.233] (II) VIVANTE(0): printing discovered frame buffer 'fb0' supported modes:
- [ 10.234] (II) VIVANTE(0): Modeline "U:1024x768p-60"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync -csync (48.4 kHz eP)
- [ 10.261] (II) VIVANTE(0): Output DISP3 BG - DI1 has no monitor section
- [ 10.261] (II) VIVANTE(0): Printing probed modes for output DISP3 BG - DI1
- [ 10.261] (II) VIVANTE(0): Modeline "U:1024x768p-60"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync -csync (48.4 kHz eP)
- [ 10.261] (II) VIVANTE(0): Output DISP3 BG - DI1 connected
- [ 10.261] (II) VIVANTE(0): Using exact sizes for initial modes
- [ 10.261] (II) VIVANTE(0): Output DISP3 BG - DI1 using initial mode U:1024x768p-60 +0+0
- [ 10.261] (II) VIVANTE(0): imxDisplayPreInit: virtual set 1024 x 768, display width 0
- [ 10.261] (II) VIVANTE(0): VivPreInit: adjust display width 1024
- [ 10.261] (--) Depth 24 pixmap format is 32 bpp
- [ 10.390] (II) VIVANTE(0): reserve 8355840 bytes for on screen frame buffer; total fb memory size 16719872 bytes; offset of shadow buffer 8355840
- [ 10.451] (II) VIVANTE(0): hardware: DISP3 BG - DI1 (video memory: 16328kB)
- [ 10.499] (II) VIVANTE(0): FB Start = 0x754cb000 FB Base = 0x754cb000 FB Offset = (nil)
- [ 10.500] (II) VIVANTE(0): test Initializing EXA
- [ 11.157] (II) EXA(0): Driver allocated offscreen pixmaps
- [ 11.158] (II) EXA(0): Driver registered support for the following operations:
- [ 11.158] (II) Solid
- [ 11.158] (II) Copy
- [ 11.158] (II) Composite (RENDER acceleration)
- [ 11.158] (II) UploadToScreen
- [ 11.158] (==) VIVANTE(0): Backing store enabled
- [ 11.162] (==) VIVANTE(0): DPMS enabled
- [ 11.162] (II) VIVANTE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
- [ 11.247] drmOpenDevice: node name is /dev/dri/card0
- [ 11.247] drmOpenDevice: open result is 13, (OK)
- [ 11.247] drmOpenDevice: node name is /dev/dri/card0
- [ 11.247] drmOpenDevice: open result is 13, (OK)
- [ 11.247] drmOpenByBusid: Searching for BusID platform:Vivante GCCore:00
- [ 11.247] drmOpenDevice: node name is /dev/dri/card0
- [ 11.247] drmOpenDevice: open result is 13, (OK)
- [ 11.247] drmOpenByBusid: drmOpenMinor returns 13
- [ 11.248] drmOpenByBusid: drmGetBusid reports platform:Vivante GCCore:00
- [ 11.248] (II) [drm] DRM interface version 1.4
- [ 11.248] (II) [drm] DRM open master succeeded.
- [ 11.248] (II) VIVANTE(0): [drm] Using the DRM lock SAREA also for drawables.
- [ 11.248] (II) VIVANTE(0): [drm] framebuffer handle = 0x6cc00000
- [ 11.248] (II) VIVANTE(0): [drm] added 1 reserved context for kernel
- [ 11.248] (II) VIVANTE(0): X context handle = 0x1
- [ 11.249] (II) VIVANTE(0): [drm] installed DRM signal handler
- [ 11.249] (II) VIVANTE(0): [DRI] installation complete
- [ 11.249] (--) RandR disabled
- [ 11.294] (II) SELinux: Disabled on system
- [ 11.300] (II) AIGLX: Screen 0 is not DRI2 capable
- [ 11.300] (EE) AIGLX: reverting to software rendering
- [ 12.763] (II) IGLX: enabled GLX_MESA_copy_sub_buffer
- [ 12.770] (II) IGLX: Loaded and initialized swrast
- [ 12.770] (II) GLX: Initialized DRISWRAST GL provider for screen 0
- [ 12.776] (II) VIVANTE(0): Setting screen physical size to 270 x 203
- [ 13.202] (II) config/udev: Adding input device gpio-keys (/dev/input/event0)
- [ 13.202] (**) gpio-keys: Applying InputClass "libinput keyboard catchall"
- [ 13.202] (II) LoadModule: "libinput"
- [ 13.214] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
- [ 13.246] (II) Module libinput: vendor="X.Org Foundation"
- [ 13.246] compiled for 1.19.0, module version = 0.23.0
- [ 13.246] Module class: X.Org XInput Driver
- [ 13.246] ABI class: X.Org XInput driver, version 24.1
- [ 13.246] (II) Using input driver 'libinput' for 'gpio-keys'
- [ 13.247] (**) gpio-keys: always reports core events
- [ 13.247] (**) Option "Device" "/dev/input/event0"
- [ 13.247] (**) Option "_source" "server/udev"
- [ 13.250] (II) input device 'gpio-keys', /dev/input/event0 is tagged by udev as: Keyboard
- [ 13.250] (II) input device 'gpio-keys', /dev/input/event0 is a keyboard
- [ 13.360] (**) Option "config_info" "udev:/sys/devices/soc0/gpio-keys/input/input1/event0"
- [ 13.360] (II) XINPUT: Adding extended input device "gpio-keys" (type: KEYBOARD, id 6)
- [ 13.360] (**) Option "xkb_model" "pc105"
- [ 13.360] (**) Option "xkb_layout" "us"
- [ 13.364] (II) input device 'gpio-keys', /dev/input/event0 is tagged by udev as: Keyboard
- [ 13.364] (II) input device 'gpio-keys', /dev/input/event0 is a keyboard
- [ 13.370] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00 (/dev/input/event1)
- [ 13.370] (**) eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00: Applying InputClass "libinput touchscreen catchall"
- [ 13.370] (II) Using input driver 'libinput' for 'eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00'
- [ 13.370] (**) eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00: always reports core events
- [ 13.370] (**) Option "Device" "/dev/input/event1"
- [ 13.371] (**) Option "_source" "server/udev"
- [ 13.444] (II) input device 'eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00', /dev/input/event1 is tagged by udev as: Touchscreen
- [ 13.445] (II) input device 'eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00', /dev/input/event1 is a touch device
- [ 13.520] (**) Option "config_info" "udev:/sys/devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.1/usb2/2-1/2-1.1/2-1.1:1.0/0003:0EEF:C000.0001/input/input2/event1"
- [ 13.520] (II) XINPUT: Adding extended input device "eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00" (type: TOUCHSCREEN, id 7)
- [ 13.521] (**) Option "AccelerationScheme" "none"
- [ 13.521] (**) eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00: (accel) selected scheme none/0
- [ 13.522] (**) eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00: (accel) acceleration factor: 2.000
- [ 13.522] (**) eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00: (accel) acceleration threshold: 4
- [ 13.594] (II) input device 'eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00', /dev/input/event1 is tagged by udev as: Touchscreen
- [ 13.594] (II) input device 'eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00', /dev/input/event1 is a touch device
- [ 13.604] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC3147-3501-08.00.00 (/dev/input/mouse0)
- [ 13.604] (II) No input driver specified, ignoring this device.
- [ 13.605] (II) This device may have been added with another device file.
- debian@nitrogen:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement