SHARE
TWEET

My dmesg after modprobe g_serial use_acm=0

a guest Jun 26th, 2018 126 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Initializing cgroup subsys cpuacct
  4. [    0.000000] Linux version 3.10.107-pine64-mine (martin@martin-LIFEBOOK-E558) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #5 SMP PREEMPT Tue Jun 26 10:10:58 CEST 2018
  5. [    0.000000] CPU: AArch64 Processor [410fd034] revision 4
  6. [    0.000000] Machine: SOPine
  7. [    0.000000] cma: CMA: reserved 64 MiB at bc000000
  8. [    0.000000] On node 0 totalpages: 520192
  9. [    0.000000]   DMA zone: 7112 pages used for memmap
  10. [    0.000000]   DMA zone: 0 pages reserved
  11. [    0.000000]   DMA zone: 520192 pages, LIFO batch:31
  12. [    0.000000] script_init enter!
  13. [    0.000000] script buffer is NULL!
  14. [    0.000000] psci: probing for conduit method from DT.
  15. [    0.000000] psci: PSCIv0.2 detected in firmware.
  16. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  17. [    0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc07af92000 s18752 r8192 d22208 u49152
  18. [    0.000000] pcpu-alloc: s18752 r8192 d22208 u49152 alloc=12*4096
  19. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  20. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 513080
  21. [    0.000000] Kernel command line: root=UUID=391a3847-b7b9-4e51-9aa5-f0bf76596904 rootfstype=ext4 rootwait console=tty1 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr= panic=10 consoleblank=0 loglevel=1  
  22. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  23. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  24. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  25. [    0.000000] Memory: 2032MB = 2032MB total
  26. [    0.000000] Memory: 1965916k/1965916k available, 114852k reserved
  27. [    0.000000] Virtual kernel memory layout:
  28.                    vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000   (245759 MB)
  29.                    vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000   (    27 MB)
  30.                    modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
  31.                    memory  : 0xffffffc000000000 - 0xffffffc07f000000   (  2032 MB)
  32.                      .init : 0xffffffc000a53000 - 0xffffffc000acf940   (   499 kB)
  33.                      .text : 0xffffffc000080000 - 0xffffffc000a52c54   ( 10060 kB)
  34.                      .data : 0xffffffc000ad0000 - 0xffffffc000c24270   (  1361 kB)
  35. [    0.000000] Preemptible hierarchical RCU implementation.
  36. [    0.000000]  Dump stacks of tasks blocking RCU-preempt GP.
  37. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  38. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  39. [    0.000000] Console: colour dummy device 80x25
  40. [    0.000000] console [tty1] enabled
  41. [    0.000000] allocated 8388608 bytes of page_cgroup
  42. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  43. [    9.567368] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  44. [    9.567376] pid_max: default: 32768 minimum: 301
  45. [    9.567468] Security Framework initialized
  46. [    9.567518] AppArmor: AppArmor initialized
  47. [    9.567553] Mount-cache hash table entries: 256
  48. [    9.578068] Initializing cgroup subsys memory
  49. [    9.578116] Initializing cgroup subsys devices
  50. [    9.578123] Initializing cgroup subsys freezer
  51. [    9.578130] Initializing cgroup subsys blkio
  52. [    9.578135] Initializing cgroup subsys perf_event
  53. [    9.578146] Initializing cgroup subsys hugetlb
  54. [    9.578211] ftrace: allocating 26455 entries in 104 pages
  55. [    9.609171] CPU0: update cpu_power 1968128
  56. [    9.609192] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
  57. [    9.610195] virtual base = 0xffffff800000a000.
  58. [    9.610207] gicd_base = 0xffffff800000c000.
  59. [    9.610212] gicc_base = 0xffffff800000e000.
  60. [    9.610847] CPU1: Booted secondary processor
  61. [    9.610873] CPU1: update cpu_power 1968128
  62. [    9.613471] CPU2: Booted secondary processor
  63. [    9.613482] CPU2: update cpu_power 1968128
  64. [    9.617590] CPU3: Booted secondary processor
  65. [    9.617601] CPU3: update cpu_power 1968128
  66. [    9.617675] Brought up 4 CPUs
  67. [    9.617695] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  68. [    9.618196] devtmpfs: initialized
  69. [    9.622957] pinctrl core: initialized pinctrl subsystem
  70. [    9.625539] NET: Registered protocol family 16
  71. [    9.625795] script_sysfs_init success
  72. [    9.626034] dump_class_init,806, success
  73. [    9.626275] vdso: 2 pages (1 code, 1 data) at base ffffffc000ad5000
  74. [    9.626296] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  75. [    9.627582] software IO TLB [mem 0xb8800000-0xb8c00000] (4MB) mapped at [ffffffc077800000-ffffffc077bfffff]
  76. [    9.628660] DMA: preallocated 256 KiB pool for atomic allocations
  77. [    9.628777] Serial: AMBA PL011 UART driver
  78. [    9.628879] axp81x_board_init: axp regl_devs num = 23
  79. [    9.629019] pll_audio-set_default_rate=24576000 success!
  80. [    9.629038] pll_video0-set_default_rate=297000000 success!
  81. [    9.629109] pll_video1-set_default_rate=297000000 success!
  82. [    9.629169] pll_de-set_default_rate=297000000 success!
  83. [    9.629876] de-set_default_source=pll_de success!
  84. [    9.629882] de-set_default_rate=297000000 success!
  85. [    9.629925] tcon0-set_default_source=pll_mipi success!
  86. [    9.629956] tcon1-set_default_source=pll_video0 success!
  87. [    9.630174] hdmi-set_default_source=pll_video0 success!
  88. [    9.632380] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  89. [    9.632537] [sun50iw1p1_pinctrl_probe][838]
  90. [    9.633963] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  91. [    9.634580] sunxi hwspinlock vbase:0xffffff800005c000
  92. [    9.644589] bio: create slab <bio-0> at 0
  93. [    9.644942] pwm module init!
  94. [    9.646156] SCSI subsystem initialized
  95. [    9.646286] usbcore: registered new interface driver usbfs
  96. [    9.646318] usbcore: registered new interface driver hub
  97. [    9.646383] usbcore: registered new device driver usb
  98. [    9.647073] Linux video capture interface: v2.00
  99. [    9.647521] [ARISC] :sunxi-arisc driver v1.10
  100. [    9.654280] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
  101. [    9.654530] Advanced Linux Sound Architecture Driver Initialized.
  102. [    9.654885] NetLabel: Initializing
  103. [    9.654891] NetLabel:  domain hash size = 128
  104. [    9.654895] NetLabel:  protocols = UNLABELED CIPSOv4
  105. [    9.654934] NetLabel:  unlabeled traffic allowed by default
  106. [    9.655093] [pm]aw_pm_init!
  107. [    9.655159] rtc physical base = 0x0000000001f00000 .
  108. [    9.655191] np name = /soc@01c00000/rtc@01f00000.
  109. [    9.655197] base = ffffff800006e100, len = 4.
  110. [    9.655202] pmu name: pmu0 .
  111. [    9.655235] pmu0_enable = 0x1.
  112. [    9.655241] pmux_id = 0x6.
  113. [    9.655247] pmux_twi_id = 0x1.
  114. [    9.655252] pmux_twi_addr = 0x34.
  115. [    9.655257] pmu name: pmu1 .
  116. [    9.655307] Warning: can not find np for pmu1.
  117. [    9.655538] add_sys_pwr_dm: get ldo name  for id: vcc-lpddr failed
  118. [    9.655698] after inited: sys_mask config = 0x4a55.
  119. [    9.655720] Warning: can not find np for dynamic_standby_para.
  120. [    9.655851] [pm]valid
  121. [    9.655855] [pm]valid
  122. [    9.655858] Notice: sun9i&sun8iw5&sun50i not need support normal standby,                change to super standby.
  123. [    9.656062] Switching to clocksource arch_sys_counter_ool
  124. [    9.666505] AppArmor: AppArmor Filesystem Enabled
  125. [    9.671719] get det_vbus is fail, 84
  126. [    9.673061] NET: Registered protocol family 2
  127. [    9.673750] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
  128. [    9.673990] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  129. [    9.674355] TCP: Hash tables configured (established 16384 bind 16384)
  130. [    9.674439] TCP: reno registered
  131. [    9.674449] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  132. [    9.674501] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  133. [    9.674761] NET: Registered protocol family 1
  134. [    9.675084] RPC: Registered named UNIX socket transport module.
  135. [    9.675089] RPC: Registered udp transport module.
  136. [    9.675094] RPC: Registered tcp transport module.
  137. [    9.675098] RPC: Registered tcp NFSv4.1 backchannel transport module.
  138. [    9.675279] Trying to unpack rootfs image as initramfs...
  139. [    9.878691] Freeing initrd memory: 4248K (ffffffc075a8f000 - ffffffc075eb5000)
  140. [    9.880855] lock super standby defaultly!
  141. [    9.880875] lookup_scene_lock_name: new scene lock super_standby
  142. [    9.880880] scene_lock_init name=super_standby
  143. [    9.880887] scene_lock: super_standby, type 5, count 1
  144. [    9.881304] audit: initializing netlink socket (disabled)
  145. [    9.881368] type=2000 audit(0.300:1): initialized
  146. [    9.882074] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  147. [    9.882575] VFS: Disk quotas dquot_6.5.2
  148. [    9.882681] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  149. [    9.883617] NFS: Registering the id_resolver key type
  150. [    9.883662] Key type id_resolver registered
  151. [    9.883667] Key type id_legacy registered
  152. [    9.883679] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  153. [    9.883818] NTFS driver 2.1.30 [Flags: R/W].
  154. [    9.883988] fuse init (API version 7.22)
  155. [    9.884170] msgmni has been set to 3975
  156. [    9.885126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  157. [    9.885211] io scheduler noop registered
  158. [    9.885217] io scheduler deadline registered
  159. [    9.885243] io scheduler cfq registered (default)
  160. [    9.885818] [DISP]disp_module_init
  161. [    9.886246] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
  162. [    9.886254] [DISP] boot_disp:0x0
  163. [    9.886849] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  164. [    9.886982] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  165. [    9.887113] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  166. [    9.888231] [DISP] disp_boot_para_parse,line:301:of_property_read disp.fb_base fail
  167. [    9.888237] [DISP] fb_base:0x0
  168. [    9.905963] Console: switching to colour frame buffer device 160x45
  169. [    9.920417] [DISP]disp_module_init finish
  170. [    9.920842] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
  171. [    9.920866] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n
  172. [    9.921207] console [ttyS0] enabled
  173. [    9.921593] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
  174. [    9.922009] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
  175. [    9.922313] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
  176. [    9.922613] uart4: ttyS4 at MMIO 0x1c29000 (irq = 36) is a SUNXI
  177. [    9.922975] misc dump reg init
  178. [    9.923122] [drm] Initialized drm 1.1.0 20060810
  179. [    9.925266] brd: module loaded
  180. [    9.927400] loop: module loaded
  181. [    9.927674] sunxi-bt bt.27: Missing bt_power.
  182. [    9.927681] sunxi-bt bt.27: bt_power_name ((null))
  183. [    9.927689] sunxi-bt bt.27: io_regulator_name (vcc-wifi-io)
  184. [    9.927723] sunxi-bt bt.27: bt_rst gpio=356  mul-sel=1  pull=-1  drv_level=-1  data=0
  185. [    9.927767] sunxi-bt bt.27: clk not config
  186. [    9.927837] sunxi-bt bt.27: block state already is 1
  187. [    9.928022] sunxi-wlan wlan.26: wlan_busnum (1)
  188. [    9.928029] sunxi-wlan wlan.26: Missing wlan_power.
  189. [    9.928036] sunxi-wlan wlan.26: wlan_power_name ((null))
  190. [    9.928043] sunxi-wlan wlan.26: io_regulator_name (vcc-wifi-io)
  191. [    9.928060] sunxi-wlan wlan.26: wlan_regon gpio=354  mul-sel=1  pull=-1  drv_level=-1  data=0
  192. [    9.928079] sunxi-wlan wlan.26: wlan_hostwake gpio=355  mul-sel=6  pull=-1  drv_level=-1  data=0
  193. [    9.928096] sunxi-wlan wlan.26: clk not config
  194. [    9.928789] WARNING: Get ephy clock is failed
  195. [    9.929420] chipid-sunxi serial 141050374620200c088f
  196. [    9.929515] PPP generic driver version 2.4.2
  197. [    9.929667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  198. [    9.929675] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
  199. [    9.929793] get ehci0-controller drv_vbus_gpio is fail
  200. [    9.929799] get ehci0-controller, regulator_io is no nocare
  201. [    9.929840] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000cad958, 0x:ffffff80000a6000, irq_no:68
  202. [    9.929893] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  203. [    9.929912] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
  204. [    9.930249] sunxi-ehci 1c1a000.ehci0-controller: park 0
  205. [    9.930278] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc00057410c
  206. [    9.930292] sunxi-ehci 1c1a000.ehci0-controller: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  207. [    9.941482] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
  208. [    9.941573] usb usb1: default language 0x0409
  209. [    9.941595] usb usb1: udev 1, busnum 1, minor = 0
  210. [    9.941603] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  211. [    9.941610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  212. [    9.941616] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  213. [    9.941623] usb usb1: Manufacturer: Linux 3.10.107-pine64-mine ehci_hcd
  214. [    9.941629] usb usb1: SerialNumber: sunxi-ehci
  215. [    9.941882] usb usb1: usb_probe_device
  216. [    9.941892] usb usb1: configuration #1 chosen from 1 choice
  217. [    9.941921] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  218. [    9.941985] hub 1-0:1.0: usb_probe_interface
  219. [    9.941992] hub 1-0:1.0: usb_probe_interface - got id
  220. [    9.942002] hub 1-0:1.0: USB hub found
  221. [    9.942017] hub 1-0:1.0: 1 port detected
  222. [    9.942023] hub 1-0:1.0: standalone hub
  223. [    9.942029] hub 1-0:1.0: no power switching (usb 1.0)
  224. [    9.942036] hub 1-0:1.0: individual port over-current protection
  225. [    9.942043] hub 1-0:1.0: power on to power good time: 20ms
  226. [    9.942055] hub 1-0:1.0: local power source is good
  227. [    9.942098] hub 1-0:1.0: trying to enable port power on non-switchable hub
  228. [    9.942191] scene_lock_init name=ehci_standby
  229. [    9.942275] get ehci1-controller drv_vbus_gpio is fail
  230. [    9.942280] get ehci1-controller, regulator_io is no nocare
  231. [    9.942322] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000cadba8, 0x:ffffff80000ae000, irq_no:6a
  232. [    9.942373] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  233. [    9.942393] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 2
  234. [    9.942613] sunxi-ehci 1c1b000.ehci1-controller: park 0
  235. [    9.942638] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc00057410c
  236. [    9.942650] sunxi-ehci 1c1b000.ehci1-controller: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  237. [    9.961166] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
  238. [    9.961217] usb usb2: default language 0x0409
  239. [    9.961237] usb usb2: udev 1, busnum 2, minor = 128
  240. [    9.961245] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  241. [    9.961252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  242. [    9.961258] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  243. [    9.961265] usb usb2: Manufacturer: Linux 3.10.107-pine64-mine ehci_hcd
  244. [    9.961271] usb usb2: SerialNumber: sunxi-ehci
  245. [    9.961474] usb usb2: usb_probe_device
  246. [    9.961483] usb usb2: configuration #1 chosen from 1 choice
  247. [    9.961502] usb usb2: adding 2-0:1.0 (config #1, interface 0)
  248. [    9.961565] hub 2-0:1.0: usb_probe_interface
  249. [    9.961572] hub 2-0:1.0: usb_probe_interface - got id
  250. [    9.961580] hub 2-0:1.0: USB hub found
  251. [    9.961592] hub 2-0:1.0: 1 port detected
  252. [    9.961598] hub 2-0:1.0: standalone hub
  253. [    9.961603] hub 2-0:1.0: no power switching (usb 1.0)
  254. [    9.961610] hub 2-0:1.0: individual port over-current protection
  255. [    9.961616] hub 2-0:1.0: power on to power good time: 20ms
  256. [    9.961626] hub 2-0:1.0: local power source is good
  257. [    9.961665] hub 2-0:1.0: trying to enable port power on non-switchable hub
  258. [    9.961750] scene_lock_init name=ehci_standby
  259. [    9.961940] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  260. [    9.961946] ohci_hcd: block sizes: ed 80 td 96
  261. [    9.962128] get ohci0-controller drv_vbus_gpio is fail
  262. [    9.962134] get ohci0-controller, regulator_io is no nocare
  263. [    9.962174] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000cad4b8
  264. [    9.962224] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  265. [    9.962240] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3
  266. [    9.962267] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x61ff726b6b64622c
  267. [    9.962297] sunxi-ohci 1c1a000.ohci0-controller: created debug files
  268. [   10.024139] sunxi-ohci 1c1a000.ohci0-controller: OHCI controller state
  269. [   10.024149] sunxi-ohci 1c1a000.ohci0-controller: OHCI 1.0, NO legacy support registers, rh state running
  270. [   10.024159] sunxi-ohci 1c1a000.ohci0-controller: control 0x083 HCFS=operational CBSR=3
  271. [   10.024168] sunxi-ohci 1c1a000.ohci0-controller: cmdstatus 0x00000 SOC=0
  272. [   10.024177] sunxi-ohci 1c1a000.ohci0-controller: intrstatus 0x00000004 SF
  273. [   10.024186] sunxi-ohci 1c1a000.ohci0-controller: intrenable 0x8000005a MIE RHSC UE RD WDH
  274. [   10.024195] sunxi-ohci 1c1a000.ohci0-controller: hcca frame #0005
  275. [   10.024205] sunxi-ohci 1c1a000.ohci0-controller: roothub.a 02001201 POTPGT=2 NOCP NPS NDP=1(1)
  276. [   10.024213] sunxi-ohci 1c1a000.ohci0-controller: roothub.b 00000000 PPCM=0000 DR=0000
  277. [   10.024221] sunxi-ohci 1c1a000.ohci0-controller: roothub.status 00008000 DRWE
  278. [   10.024232] sunxi-ohci 1c1a000.ohci0-controller: roothub.portstatus [0] 0x00000100 PPS
  279. [   10.024258] usb usb3: default language 0x0409
  280. [   10.024277] usb usb3: udev 1, busnum 3, minor = 256
  281. [   10.024285] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  282. [   10.024292] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  283. [   10.024299] usb usb3: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  284. [   10.024305] usb usb3: Manufacturer: Linux 3.10.107-pine64-mine ohci_hcd
  285. [   10.024312] usb usb3: SerialNumber: sunxi-ohci
  286. [   10.024514] usb usb3: usb_probe_device
  287. [   10.024522] usb usb3: configuration #1 chosen from 1 choice
  288. [   10.024541] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  289. [   10.024602] hub 3-0:1.0: usb_probe_interface
  290. [   10.024609] hub 3-0:1.0: usb_probe_interface - got id
  291. [   10.024618] hub 3-0:1.0: USB hub found
  292. [   10.024630] hub 3-0:1.0: 1 port detected
  293. [   10.024636] hub 3-0:1.0: standalone hub
  294. [   10.024642] hub 3-0:1.0: no power switching (usb 1.0)
  295. [   10.024648] hub 3-0:1.0: no over-current protection
  296. [   10.024654] hub 3-0:1.0: power on to power good time: 4ms
  297. [   10.024665] hub 3-0:1.0: local power source is good
  298. [   10.024700] hub 3-0:1.0: trying to enable port power on non-switchable hub
  299. [   10.024785] scene_lock_init name=ohci_standby
  300. [   10.024850] get ohci1-controller drv_vbus_gpio is fail
  301. [   10.024855] get ohci1-controller, regulator_io is no nocare
  302. [   10.024889] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000cad708
  303. [   10.024931] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  304. [   10.024946] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 4
  305. [   10.024971] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x61ff726b6b64622c
  306. [   10.039914] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  307. [   10.039942] hub 1-0:1.0: hub_suspend
  308. [   10.039959] usb usb1: bus auto-suspend, wakeup 1
  309. [   10.039966] sunxi-ehci 1c1a000.ehci0-controller: suspend root hub
  310. [   10.059564] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
  311. [   10.059581] hub 2-0:1.0: hub_suspend
  312. [   10.059591] usb usb2: bus auto-suspend, wakeup 1
  313. [   10.059597] sunxi-ehci 1c1b000.ehci1-controller: suspend root hub
  314. [   10.083211] sunxi-ohci 1c1b000.ohci1-controller: OHCI controller state
  315. [   10.083221] sunxi-ohci 1c1b000.ohci1-controller: OHCI 1.0, NO legacy support registers, rh state running
  316. [   10.083230] sunxi-ohci 1c1b000.ohci1-controller: control 0x083 HCFS=operational CBSR=3
  317. [   10.083238] sunxi-ohci 1c1b000.ohci1-controller: cmdstatus 0x00000 SOC=0
  318. [   10.083247] sunxi-ohci 1c1b000.ohci1-controller: intrstatus 0x00000004 SF
  319. [   10.083255] sunxi-ohci 1c1b000.ohci1-controller: intrenable 0x8000005a MIE RHSC UE RD WDH
  320. [   10.083265] sunxi-ohci 1c1b000.ohci1-controller: hcca frame #0005
  321. [   10.083274] sunxi-ohci 1c1b000.ohci1-controller: roothub.a 02001201 POTPGT=2 NOCP NPS NDP=1(1)
  322. [   10.083282] sunxi-ohci 1c1b000.ohci1-controller: roothub.b 00000000 PPCM=0000 DR=0000
  323. [   10.083290] sunxi-ohci 1c1b000.ohci1-controller: roothub.status 00008000 DRWE
  324. [   10.083299] sunxi-ohci 1c1b000.ohci1-controller: roothub.portstatus [0] 0x00000100 PPS
  325. [   10.083325] usb usb4: default language 0x0409
  326. [   10.083343] usb usb4: udev 1, busnum 4, minor = 384
  327. [   10.083350] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  328. [   10.083357] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  329. [   10.083364] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  330. [   10.083370] usb usb4: Manufacturer: Linux 3.10.107-pine64-mine ohci_hcd
  331. [   10.083376] usb usb4: SerialNumber: sunxi-ohci
  332. [   10.083586] usb usb4: usb_probe_device
  333. [   10.083595] usb usb4: configuration #1 chosen from 1 choice
  334. [   10.083613] usb usb4: adding 4-0:1.0 (config #1, interface 0)
  335. [   10.083672] hub 4-0:1.0: usb_probe_interface
  336. [   10.083679] hub 4-0:1.0: usb_probe_interface - got id
  337. [   10.083687] hub 4-0:1.0: USB hub found
  338. [   10.083703] hub 4-0:1.0: 1 port detected
  339. [   10.083710] hub 4-0:1.0: standalone hub
  340. [   10.083716] hub 4-0:1.0: no power switching (usb 1.0)
  341. [   10.083721] hub 4-0:1.0: no over-current protection
  342. [   10.083728] hub 4-0:1.0: power on to power good time: 4ms
  343. [   10.083738] hub 4-0:1.0: local power source is good
  344. [   10.083779] hub 4-0:1.0: trying to enable port power on non-switchable hub
  345. [   10.083861] scene_lock_init name=ohci_standby
  346. [   10.084174] usbcore: registered new interface driver usb-storage
  347. [   10.084205] usbcore: registered new interface driver ums-alauda
  348. [   10.084233] usbcore: registered new interface driver ums-cypress
  349. [   10.084259] usbcore: registered new interface driver ums-datafab
  350. [   10.084281] usbcore: registered new interface driver ums_eneub6250
  351. [   10.084307] usbcore: registered new interface driver ums-freecom
  352. [   10.084331] usbcore: registered new interface driver ums-isd200
  353. [   10.084354] usbcore: registered new interface driver ums-jumpshot
  354. [   10.084377] usbcore: registered new interface driver ums-karma
  355. [   10.084401] usbcore: registered new interface driver ums-onetouch
  356. [   10.084432] usbcore: registered new interface driver ums-realtek
  357. [   10.084456] usbcore: registered new interface driver ums-sddr09
  358. [   10.084480] usbcore: registered new interface driver ums-sddr55
  359. [   10.084507] usbcore: registered new interface driver ums-usbat
  360. [   10.084595] usbcore: registered new interface driver usbserial
  361. [   10.084621] usbcore: registered new interface driver usbserial_generic
  362. [   10.084642] usbserial: USB Serial support registered for generic
  363. [   10.084836] mousedev: PS/2 mouse device common for all mice
  364. [   10.085301] input: sunxi-keyboard as /devices/virtual/input/input0
  365. [   10.086110] get ctp_para failed, -1
  366. [   10.086129] get node gsensor failed
  367. [   10.086133] get sysconfig para erro!
  368. [   10.086142] get node lightsensor failed
  369. [   10.086145] get sysconfig para erro!
  370. [   10.086154] get node gyroscopesensor failed
  371. [   10.086158] get sysconfig para erro!
  372. [   10.086166] get node compasssensor failed
  373. [   10.086170] get sysconfig para erro!
  374. [   10.086488] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
  375. [   10.086508] sunxi-rtc 1f00000.rtc: RTC enabled
  376. [   10.086669] i2c /dev entries driver
  377. [   10.118631] hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000
  378. [   10.118661] hub 3-0:1.0: hub_suspend
  379. [   10.118679] usb usb3: bus auto-suspend, wakeup 1
  380. [   10.118689] sunxi-ohci 1c1a000.ohci0-controller: suspend root hub
  381. [   10.129014] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input1
  382. [   10.132468] sunxi budget cooling probe start !
  383. [   10.132495] CPU freq cooling register Success
  384. [   10.132512] CPU hotplug cooling register Success
  385. [   10.132591] thermal thermal_zone0: binding zone soc_thermal with cdev sunxi-budget failed:-22
  386. [   10.132600] CPU budget cooling register Success
  387. [   10.132815] sunxi gpu cooling probe start !
  388. [   10.132824] CPU gpu cooling register Success
  389. [   10.133495] cpuidle: using governor ladder
  390. [   10.133502] cpuidle: using governor menu
  391. [   10.134251] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jun 26 2018 at 09:08:59
  392. [   10.134279] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str none
  393. [   10.134288] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str none
  394. [   10.134296] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc
  395. [   10.134349] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
  396. [   10.134356] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
  397. [   10.134945] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  398. [   10.134970] sunxi-mmc 1c0f000.sdmmc: no vqmmc,Check if there is regulator
  399. [   10.086197] wakeup gpio set err!get node ctp failed
  400. [   10.138332] get sysconfig para erro!
  401. [   10.148114] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  402. [   10.167803] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000c2000 irq:92
  403. [   10.168179] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jun 26 2018 at 09:08:59
  404. [   10.168204] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
  405. [   10.168212] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
  406. [   10.168219] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
  407. [   10.168223] get() with no identifier
  408. [   10.168226] get() with no identifier
  409. [   10.168230] get() with no identifier
  410. [   10.168235] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
  411. [   10.168241] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
  412. [   10.168247] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
  413. [   10.168619] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  414. [   10.168629] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
  415. [   10.168647] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
  416. [   10.169449] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
  417. [   10.169468] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  418. [   10.171853] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  419. [   10.173993] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  420. [   10.174807] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  421. [   10.175618] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  422. [   10.176430] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
  423. [   10.177054] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  424. [   10.177098] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  425. [   10.177675] hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000
  426. [   10.177707] hub 4-0:1.0: hub_suspend
  427. [   10.177725] usb usb4: bus auto-suspend, wakeup 1
  428. [   10.177735] sunxi-ohci 1c1b000.ohci1-controller: suspend root hub
  429. [   10.179473] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
  430. [   10.187472] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  431. [   10.207160] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000ca000 irq:93
  432. [   10.207838] ledtrig-cpu: registered to indicate activity on CPUs
  433. [   10.207903] hidraw: raw HID events driver (C) Jiri Kosina
  434. [   10.208027] usbcore: registered new interface driver usbhid
  435. [   10.208032] usbhid: USB HID core driver
  436. [   10.208911] usbcore: registered new interface driver snd-usb-audio
  437. [   10.210948] sndhdmi sound.8:  sndhdmi <-> 1c22800.daudio mapping ok
  438. [   10.211744] TCP: cubic registered
  439. [   10.211753] Initializing XFRM netlink socket
  440. [   10.211770] NET: Registered protocol family 17
  441. [   10.211805] NET: Registered protocol family 15
  442. [   10.211851] 8021q: 802.1Q VLAN Support v1.8
  443. [   10.211904] Key type dns_resolver registered
  444. [   10.212115] Registering SWP/SWPB emulation handler
  445. [   10.212375] registered taskstats version 1
  446. [   10.223864] Key type encrypted registered
  447. [   10.223888] AppArmor: AppArmor sha1 policy hashing enabled
  448. [   10.224319] [DISP] disp_boot_para_parse,line:301:of_property_read disp.boot_disp fail
  449. [   10.224327] [DISP] boot_disp:0x0
  450. [   10.224373] HDMI base address: ffffff8000b40000
  451. [   10.225153] [HDMI] power vcc-hdmi-33
  452. [   10.225686] [HDMI] cec support = 0
  453. [   10.246270] mmc0: host does not support reading read-only switch. assuming write-enable.
  454. [   10.249533] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
  455. [   10.249610] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
  456. [   10.249716] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
  457. [   10.249741] mmc0: new high speed SDHC card at address aaaa
  458. [   10.250135] mmcblk0: mmc0:aaaa SP32G 29.7 GiB
  459. [   10.251235]  mmcblk0: p1 p2
  460. [   10.252444] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  461. [   10.253252] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  462. [   10.253270] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  463. [   10.255661] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  464. [   10.257479] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
  465. [   10.258288] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  466. [   10.259094] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  467. [   10.259899] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  468. [   10.260703] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  469. [   10.261510] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  470. [   10.262317] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  471. [   10.263124] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  472. [   10.263931] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  473. [   10.263947] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  474. [   10.264781] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !!
  475. [   10.264798] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  476. [   10.336152] input: sunxi-ths as /devices/virtual/input/input2
  477. [   10.336317] thermal thermal_zone0: failed to read out thermal zone 0
  478. [   10.336727] ALSA device list:
  479. [   10.336733]   #0: sndhdmi
  480. [   10.337132] Freeing unused kernel memory: 496K (ffffffc000a53000 - ffffffc000acf000)
  481. [   10.925524] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=5
  482. [   10.969196] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  483. [   11.326378] systemd[1]: System time before build time, advancing clock.
  484. [   11.351267] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  485. [   11.351580] systemd[1]: Detected architecture arm64.
  486. [   11.380663] systemd[1]: Set hostname to <pine64so>.
  487. [   11.641962] systemd[1]: Started Trigger resolvconf update for networkd DNS.
  488. [   11.663759] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  489. [   11.683236] systemd[1]: Reached target Swap.
  490. [   11.703058] systemd[1]: Listening on fsck to fsckd communication Socket.
  491. [   11.722999] systemd[1]: Created slice System Slice.
  492. [   11.742457] systemd[1]: Listening on Journal Socket (/dev/log).
  493. [   11.762081] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  494. [   11.782151] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  495. [   11.801414] systemd[1]: Listening on udev Kernel Socket.
  496. [   11.820991] systemd[1]: Reached target Encrypted Volumes.
  497. [   11.840671] systemd[1]: Reached target Remote File Systems (Pre).
  498. [   11.860345] systemd[1]: Reached target Remote File Systems.
  499. [   11.880117] systemd[1]: Listening on Syslog Socket.
  500. [   11.899918] systemd[1]: Reached target Paths.
  501. [   11.919746] systemd[1]: Created slice system-serial\x2dgetty.slice.
  502. [   11.939199] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  503. [   11.958888] systemd[1]: Listening on udev Control Socket.
  504. [   11.978578] systemd[1]: Listening on Journal Socket.
  505. [   11.999931] systemd[1]: Mounting POSIX Message Queue File System...
  506. [   12.020019] systemd[1]: Starting Set console keymap...
  507. [   12.039800] systemd[1]: Starting Nameserver information manager...
  508. [   12.059473] systemd[1]: Starting Remount Root and Kernel File Systems...
  509. [   12.079005] systemd[1]: Mounting Debug File System...
  510. [   12.101078] systemd[1]: Starting Restore / save the current clock...
  511. [   12.102366] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  512. [   12.118721] systemd[1]: Mounting Huge Pages File System...
  513. [   12.138250] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  514. [   12.161208] systemd[1]: Starting Load Kernel Modules...
  515. [   12.182653] systemd[1]: Created slice User and Session Slice.
  516. [   12.204922] systemd[1]: Reached target Slices.
  517. [   12.209321] sunxi-codec-machine sound.7:  codec-aif1 <-> 1c22c00.i2s0-controller mapping ok
  518. [   12.209625] sunxi-codec-machine sound.7:  codec-aif2 <-> bb-dai mapping ok
  519. [   12.209799] sunxi-codec-machine sound.7:  codec-aif2 <-> bb-dai mapping ok
  520. [   12.209982] sunxi-codec-machine sound.7:  codec-aif3 <-> bb-dai mapping ok
  521. [   12.211243] input: audiocodec sunxi Audio Jack as /devices/soc.1/sound.7/sound/card1/input3
  522. [   12.211766] SUNXI_HMIC_STS:8,225
  523. [   12.214582] plugout_end:switch:0
  524. [   12.228801] systemd[1]: Mounted Debug File System.
  525. [   12.244519] systemd[1]: Mounted Huge Pages File System.
  526. [   12.264236] systemd[1]: Mounted POSIX Message Queue File System.
  527. [   12.267428] cfg80211: Calling CRDA to update world regulatory domain
  528. [   12.285112] systemd[1]: Started Set console keymap.
  529. [   12.307892] systemd[1]: Started Remount Root and Kernel File Systems.
  530. [   12.324781] systemd[1]: Started Restore / save the current clock.
  531. [   12.344098] systemd[1]: Started Create list of required static device nodes for the current kernel.
  532. [   12.363756] systemd[1]: Time has been changed
  533. [   12.380949] systemd[1]: Started Nameserver information manager.
  534. [   12.387256] RTL871X: module init start
  535. [   12.387274] RTL871X: rtl8723bs v4.3.16_13854.20150410_BTCOEX20150119-5844
  536. [   12.387279] RTL871X: build time: Jun 26 2018 09:10:21
  537. [   12.387283] RTL871X: rtl8723bs BT-Coex version = BTCOEX20150119-5844
  538. [   12.387301] sunxi-wlan wlan.26: bus_index: 1
  539. [   12.387496] sunxi-wlan wlan.26: check wlan io_regulator voltage: 1800000
  540. [   12.482282] systemd[1]: Starting Create Static Device Nodes in /dev...
  541. [   12.495876] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  542. [   12.495989] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
  543. [   12.496109] RTL871X: module init ret=0
  544. [   12.505186] systemd[1]: Starting udev Coldplug all Devices...
  545. [   12.509775] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  546. [   12.522254] systemd[1]: Starting Load/Save Random Seed...
  547. [   12.530298] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  548. [   12.531121] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
  549. [   12.531141] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  550. [   12.533559] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  551. [   12.535380] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
  552. [   12.536194] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  553. [   12.537002] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  554. [   12.537842] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  555. [   12.538656] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
  556. [   12.539474] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  557. [   12.540250] systemd[1]: Started Load Kernel Modules.
  558. [   12.540289] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  559. [   12.541103] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  560. [   12.541909] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
  561. [   12.541930] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  562. [   12.542813] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !!
  563. [   12.542833] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  564. [   12.560521] systemd[1]: Started Load/Save Random Seed.
  565. [   12.579956] systemd[1]: Started Create Static Device Nodes in /dev.
  566. [   12.647006] systemd[1]: Starting udev Kernel Device Manager...
  567. [   12.667520] systemd[1]: Reached target Local File Systems (Pre).
  568. [   12.690498] systemd[1]: Mounting /tmp...
  569. [   12.708780] systemd[1]: Mounting Configuration File System...
  570. [   12.729199] systemd[1]: Mounting FUSE Control File System...
  571. [   12.748691] systemd[1]: Starting Apply Kernel Variables...
  572. [   12.769321] systemd[1]: Mounted FUSE Control File System.
  573. [   12.785998] systemd[1]: Mounted Configuration File System.
  574. [   12.805375] systemd[1]: Mounted /tmp.
  575. [   12.825637] systemd[1]: Started udev Kernel Device Manager.
  576. [   12.845645] systemd[1]: Started udev Coldplug all Devices.
  577. [   12.866657] systemd[1]: Started Apply Kernel Variables.
  578. [   12.927961] cfg80211: World regulatory domain updated:
  579. [   12.927984] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  580. [   12.927990] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  581. [   12.927996] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
  582. [   12.928001] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
  583. [   12.928006] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  584. [   12.928011] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  585. [   12.928017] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
  586. [   12.928022] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
  587. [   12.928027] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  588. [   12.940788] systemd[1]: Reached target Sound Card.
  589. [   12.971680] systemd[1]: Started Entropy daemon using the HAVEGE algorithm.
  590. [   12.980433] systemd[1]: Reached target Local File Systems.
  591. [   12.996206] sunxi cedar version 0.1
  592. [   12.996484] [cedar]: install start!!!
  593. [   12.996587] systemd[1]: Starting Armbian enhanced Log2Ram...
  594. [   12.996659] ycy the get irq is 90
  595. [   12.997143] ycy clk_bass_vir 0x18  is ffffff8000b3c018, the value:3006207
  596. [   12.997149] ycy clk_bass_vir 0x13c  is ffffff8000b3c13c, the value:0
  597. [   12.997155] ycy clk_bass_vir 0x64  is ffffff8000b3c064, the value:601810
  598. [   12.997160] ycy clk_bass_vir 0x2c4  is ffffff8000b3c2c4, the value:601c10
  599. [   12.997165] ycy clk_bass_vir 0x100  is ffffff8000b3c100, the value:0
  600. [   12.997169] [cedar]: install end!!!
  601. [   13.009126] systemd[1]: Starting Set console font and keymap...
  602. [   13.082042] systemd[1]: Found device /dev/ttyS0.
  603. [   13.167568] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  604. [   13.192259] systemd[1]: Starting Load/Save RF Kill Switch Status...
  605. [   13.196356] Registered IR keymap rc_map_sunxi
  606. [   13.196936] input: sunxi_ir_recv as /devices/soc.1/1f02000.s_cir/rc/rc0/input4
  607. [   13.197719] rc0: sunxi_ir_recv as /devices/soc.1/1f02000.s_cir/rc/rc0
  608. [   13.198491] Driver for 1-wire Dallas network protocol.
  609. [   13.214461] [VFE]cci probe end cci_sel = 0!
  610. [   13.214685] [VFE]cci_init end
  611. [   13.238924] IR NEC protocol handler initialized
  612. [   13.240591] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input5
  613. [   13.240981] IR MCE Keyboard/mouse protocol handler initialized
  614. [   13.265327] sunxi-bt bt.27: block state already is 1
  615. [   13.265856] systemd[1]: Started Load/Save RF Kill Switch Status.
  616. [   13.270868] IR RC5(x) protocol handler initialized
  617. [   13.271819] IR JVC protocol handler initialized
  618. [   13.272422] IR RC6 protocol handler initialized
  619. [   13.272907] IR SANYO protocol handler initialized
  620. [   13.273614] IR Sony protocol handler initialized
  621. [   13.274211] lirc_dev: IR Remote Control driver registered, major 248
  622. [   13.276700] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0
  623. [   13.276722] IR LIRC bridge handler initialized
  624. [   13.431977] [VFE]Welcome to Video Front End driver
  625. [   13.432344] [VFE]csi probe end csi_sel = 0!
  626. [   13.432664] [VFE]csi_init end
  627. [   13.433128] [VFE]isp probe start isp_sel = 0!
  628. [   13.436042] [ISP] isp platform_id = 3!
  629. [   13.436070] [VFE]isp probe end isp_sel = 0!
  630. [   13.436175] [VFE]sunxi_isp_platform_register end
  631. [   13.436716] [VFE]mipi probe start mipi_sel = 0!
  632. [   13.436748] [VFE]mipi probe end mipi_sel = 0!
  633. [   13.436803] [VFE]mipi_init end
  634. [   13.436810] [VFE]flash_init end
  635. [   13.437165] [VFE]vfe_init end
  636. [   13.595628] systemd[1]: Started Set console font and keymap.
  637. [   13.618384] systemd[1]: Created slice system-getty.slice.
  638. [   13.631491]
  639.                
  640.                rmmod_host_driver
  641.  
  642. [   13.631521] [ehci0-controller]: sunxi_usb_disable_ehci
  643. [   13.631532] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000cad958
  644. [   13.631556] scene_lock_destroy name=ehci_standby
  645. [   13.631572] sunxi-ehci 1c1a000.ehci0-controller: remove, state 4
  646. [   13.631585] sunxi-ehci 1c1a000.ehci0-controller: roothub graceful disconnect
  647. [   13.631603] usb usb1: USB disconnect, device number 1
  648. [   13.631610] usb usb1: unregistering device
  649. [   13.631617] usb usb1: unregistering interface 1-0:1.0
  650. [   13.631883] usb usb1: usb_disable_device nuking all URBs
  651. [   13.632966] sunxi-ehci 1c1a000.ehci0-controller: stop
  652. [   13.632996] sunxi-ehci 1c1a000.ehci0-controller: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
  653. [   13.633085] sunxi-ehci 1c1a000.ehci0-controller: irq normal 0 err 0 iaa 0 (lost 0)
  654. [   13.633092] sunxi-ehci 1c1a000.ehci0-controller: complete 0 unlink 0
  655. [   13.633104] sunxi-ehci 1c1a000.ehci0-controller: ehci_stop completed status 1000 Halt
  656. [   13.633136] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
  657. [   13.633174] [ohci0-controller]: sunxi_usb_disable_ohci
  658. [   13.633182] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000cad4b8
  659. [   13.633188] scene_lock_destroy name=ohci_standby
  660. [   13.633196] sunxi-ohci 1c1a000.ohci0-controller: remove, state 4
  661. [   13.633207] sunxi-ohci 1c1a000.ohci0-controller: roothub graceful disconnect
  662. [   13.633223] usb usb3: USB disconnect, device number 1
  663. [   13.633230] usb usb3: unregistering device
  664. [   13.633237] usb usb3: unregistering interface 3-0:1.0
  665. [   13.633422] usb usb3: usb_disable_device nuking all URBs
  666. [   13.634881] sunxi-ohci 1c1a000.ohci0-controller: OHCI controller state
  667. [   13.634896] sunxi-ohci 1c1a000.ohci0-controller: OHCI 1.0, NO legacy support registers, rh state suspended
  668. [   13.634907] sunxi-ohci 1c1a000.ohci0-controller: control 0x4c3 RWE HCFS=suspend CBSR=3
  669. [   13.634916] sunxi-ohci 1c1a000.ohci0-controller: cmdstatus 0x00000 SOC=0
  670. [   13.634925] sunxi-ohci 1c1a000.ohci0-controller: intrstatus 0x00000004 SF
  671. [   13.634934] sunxi-ohci 1c1a000.ohci0-controller: intrenable 0x8000005a MIE RHSC UE RD WDH
  672. [   13.634944] sunxi-ohci 1c1a000.ohci0-controller: hcca frame #0065
  673. [   13.634954] sunxi-ohci 1c1a000.ohci0-controller: roothub.a 02001201 POTPGT=2 NOCP NPS NDP=1(1)
  674. [   13.634962] sunxi-ohci 1c1a000.ohci0-controller: roothub.b 00000000 PPCM=0000 DR=0000
  675. [   13.634970] sunxi-ohci 1c1a000.ohci0-controller: roothub.status 00008000 DRWE
  676. [   13.634981] sunxi-ohci 1c1a000.ohci0-controller: roothub.portstatus [0] 0x00000100 PPS
  677. [   13.635047] sunxi-ohci 1c1a000.ohci0-controller: USB bus 3 deregistered
  678. [   13.635090]
  679.                
  680.                insmod_host_driver
  681.  
  682. [   13.635102] [ehci0-controller]: sunxi_usb_enable_ehci
  683. [   13.635110] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000cad958, 0x:ffffff80000a6000, irq_no:68
  684. [   13.635156] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  685. [   13.635181] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
  686. [   13.637208] sunxi-ehci 1c1a000.ehci0-controller: park 0
  687. [   13.637260] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0004ce314
  688. [   13.637275] sunxi-ehci 1c1a000.ehci0-controller: init command 0010005 (park)=0 ithresh=1 period=512 RUN
  689. [   13.651278] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
  690. [   13.651431] usb usb1: default language 0x0409
  691. [   13.651458] usb usb1: udev 1, busnum 1, minor = 0
  692. [   13.651468] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  693. [   13.651476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  694. [   13.651483] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  695. [   13.651490] usb usb1: Manufacturer: Linux 3.10.107-pine64-mine ehci_hcd
  696. [   13.651497] usb usb1: SerialNumber: sunxi-ehci
  697. [   13.652032] usb usb1: usb_probe_device
  698. [   13.652046] usb usb1: configuration #1 chosen from 1 choice
  699. [   13.652089] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  700. [   13.652187] hub 1-0:1.0: usb_probe_interface
  701. [   13.652195] hub 1-0:1.0: usb_probe_interface - got id
  702. [   13.652212] hub 1-0:1.0: USB hub found
  703. [   13.652232] hub 1-0:1.0: 1 port detected
  704. [   13.652238] hub 1-0:1.0: standalone hub
  705. [   13.652246] hub 1-0:1.0: no power switching (usb 1.0)
  706. [   13.652254] hub 1-0:1.0: individual port over-current protection
  707. [   13.652263] hub 1-0:1.0: power on to power good time: 20ms
  708. [   13.652284] hub 1-0:1.0: local power source is good
  709. [   13.652354] hub 1-0:1.0: trying to enable port power on non-switchable hub
  710. [   13.652494] scene_lock_init name=ehci_standby
  711. [   13.652502] [ohci0-controller]: sunxi_usb_enable_ohci
  712. [   13.652511] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000cad4b8
  713. [   13.652567] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  714. [   13.652588] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 3
  715. [   13.652645] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0xffffffc000162ee4
  716. [   13.652739] sunxi-ohci 1c1a000.ohci0-controller: created debug files
  717. [   13.672345] systemd[1]: Found device /sys/subsystem/net/devices/eth0.
  718. [   13.714244] sunxi-ohci 1c1a000.ohci0-controller: OHCI controller state
  719. [   13.714268] sunxi-ohci 1c1a000.ohci0-controller: OHCI 1.0, NO legacy support registers, rh state running
  720. [   13.714278] sunxi-ohci 1c1a000.ohci0-controller: control 0x083 HCFS=operational CBSR=3
  721. [   13.714286] sunxi-ohci 1c1a000.ohci0-controller: cmdstatus 0x00000 SOC=0
  722. [   13.714296] sunxi-ohci 1c1a000.ohci0-controller: intrstatus 0x00000004 SF
  723. [   13.714305] sunxi-ohci 1c1a000.ohci0-controller: intrenable 0x8000005a MIE RHSC UE RD WDH
  724. [   13.714314] sunxi-ohci 1c1a000.ohci0-controller: hcca frame #0005
  725. [   13.714325] sunxi-ohci 1c1a000.ohci0-controller: roothub.a 02001201 POTPGT=2 NOCP NPS NDP=1(1)
  726. [   13.714334] sunxi-ohci 1c1a000.ohci0-controller: roothub.b 00000000 PPCM=0000 DR=0000
  727. [   13.714342] sunxi-ohci 1c1a000.ohci0-controller: roothub.status 00008000 DRWE
  728. [   13.714354] sunxi-ohci 1c1a000.ohci0-controller: roothub.portstatus [0] 0x00000100 PPS
  729. [   13.714419] usb usb3: default language 0x0409
  730. [   13.714441] usb usb3: udev 1, busnum 3, minor = 256
  731. [   13.714451] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  732. [   13.714458] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  733. [   13.714465] usb usb3: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  734. [   13.714472] usb usb3: Manufacturer: Linux 3.10.107-pine64-mine ohci_hcd
  735. [   13.714478] usb usb3: SerialNumber: sunxi-ohci
  736. [   13.714953] usb usb3: usb_probe_device
  737. [   13.714965] usb usb3: configuration #1 chosen from 1 choice
  738. [   13.715002] usb usb3: adding 3-0:1.0 (config #1, interface 0)
  739. [   13.715096] hub 3-0:1.0: usb_probe_interface
  740. [   13.715104] hub 3-0:1.0: usb_probe_interface - got id
  741. [   13.715114] hub 3-0:1.0: USB hub found
  742. [   13.715133] hub 3-0:1.0: 1 port detected
  743. [   13.715139] hub 3-0:1.0: standalone hub
  744. [   13.715146] hub 3-0:1.0: no power switching (usb 1.0)
  745. [   13.715152] hub 3-0:1.0: no over-current protection
  746. [   13.715160] hub 3-0:1.0: power on to power good time: 4ms
  747. [   13.715173] hub 3-0:1.0: local power source is good
  748. [   13.715216] hub 3-0:1.0: trying to enable port power on non-switchable hub
  749. [   13.715338] scene_lock_init name=ohci_standby
  750. [   13.715345] host_chose finished 86!
  751. [   13.725492] systemd[1]: Started Armbian enhanced Log2Ram.
  752. [   13.749670] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  753. [   13.749741] hub 1-0:1.0: hub_suspend
  754. [   13.749763] usb usb1: bus auto-suspend, wakeup 1
  755. [   13.749775] sunxi-ehci 1c1a000.ehci0-controller: suspend root hub
  756. [   13.760490] systemd[1]: Starting Journal Service...
  757. [   13.808710] hub 3-0:1.0: state 7 ports 1 chg 0000 evt 0000
  758. [   13.808764] hub 3-0:1.0: hub_suspend
  759. [   13.808787] usb usb3: bus auto-suspend, wakeup 1
  760. [   13.808798] sunxi-ohci 1c1a000.ohci0-controller: suspend root hub
  761. [   13.934457] systemd[1]: Started Journal Service.
  762. [   14.000565] systemd-journald[463]: Received request to flush runtime journal from PID 1
  763. [   14.412924] Request GPIO -2
  764. [   14.412943] ------------[ cut here ]------------
  765. [   14.412969] WARNING: at drivers/gpio/gpiolib.c:126 gmac_phy_power_on.part.5+0xbc/0xd0()
  766. [   14.412974] invalid GPIO -2
  767. [   14.412979] Modules linked in: vfe_v4l2 ir_lirc_codec lirc_dev ir_sony_decoder ir_sanyo_decoder ir_rc6_decoder ir_jvc_decoder ir_rc5_decoder w1_gpio ir_mce_kbd_decoder ir_nec_decoder videobuf2_dma_contig videobuf2_memops vfe_io wire sunxi_ir_rx videobuf2_core cedar_ve ss 8723bs cfg80211 sunxi_sndcodec sunxi_i2s sunxi_codec
  768. [   14.413043] CPU: 3 PID: 504 Comm: ifconfig Not tainted 3.10.107-pine64-mine #5
  769. [   14.413049] Call trace:
  770. [   14.415836] [<ffffffc000088c18>] dump_backtrace+0x0/0x120
  771. [   14.415848] [<ffffffc000088d5c>] show_stack+0x24/0x30
  772. [   14.415859] [<ffffffc00009e698>] warn_slowpath_common+0x80/0xa8
  773. [   14.415866] [<ffffffc00009e724>] warn_slowpath_fmt+0x64/0x78
  774. [   14.415877] [<ffffffc000540e6c>] gmac_phy_power_on.part.5+0xbc/0xd0
  775. [   14.415885] [<ffffffc000540eb4>] geth_open+0x34/0x6a8
  776. [   14.415897] [<ffffffc0006c9918>] __dev_open+0xb8/0x128
  777. [   14.415904] [<ffffffc0006c9bd4>] __dev_change_flags+0x94/0x150
  778. [   14.415912] [<ffffffc0006c9d48>] dev_change_flags+0x30/0x78
  779. [   14.415923] [<ffffffc000734670>] devinet_ioctl+0x6a8/0x750
  780. [   14.415933] [<ffffffc0006ab138>] sock_do_ioctl+0x40/0x88
  781. [   14.415941] [<ffffffc0006ab688>] sock_ioctl+0x250/0x328
  782. [   14.415950] [<ffffffc0001d27b0>] do_vfs_ioctl+0x350/0x5b0
  783. [   14.415957] [<ffffffc0001d2aa4>] SyS_ioctl+0x94/0xa8
  784. [   14.415963] ---[ end trace 2885816512522c52 ]---
  785. [   14.551001] zram: module is from the staging directory, the quality is unknown, you have been warned.
  786. [   14.559784] zram: Created 4 device(s) ...
  787. [   14.631907] ------------[ cut here ]------------
  788. [   14.631960] WARNING: at drivers/gpio/gpiolib.c:126 __gpio_get_value+0x174/0x1a0()
  789. [   14.631966] invalid GPIO -2
  790. [   14.631971] Modules linked in: zram(C) vfe_v4l2 ir_lirc_codec lirc_dev ir_sony_decoder ir_sanyo_decoder ir_rc6_decoder ir_jvc_decoder ir_rc5_decoder w1_gpio ir_mce_kbd_decoder ir_nec_decoder videobuf2_dma_contig videobuf2_memops vfe_io wire sunxi_ir_rx videobuf2_core cedar_ve ss 8723bs cfg80211 sunxi_sndcodec sunxi_i2s sunxi_codec
  791. [   14.632046] CPU: 0 PID: 504 Comm: ifconfig Tainted: G        WC   3.10.107-pine64-mine #5
  792. [   14.632052] Call trace:
  793. [   14.635026] [<ffffffc000088c18>] dump_backtrace+0x0/0x120
  794. [   14.635044] [<ffffffc000088d5c>] show_stack+0x24/0x30
  795. [   14.635055] [<ffffffc00009e698>] warn_slowpath_common+0x80/0xa8
  796. [   14.635062] [<ffffffc00009e724>] warn_slowpath_fmt+0x64/0x78
  797. [   14.635072] [<ffffffc00045079c>] __gpio_get_value+0x174/0x1a0
  798. [   14.635085] [<ffffffc000540e2c>] gmac_phy_power_on.part.5+0x7c/0xd0
  799. [   14.635093] [<ffffffc000540eb4>] geth_open+0x34/0x6a8
  800. [   14.635105] [<ffffffc0006c9918>] __dev_open+0xb8/0x128
  801. [   14.635113] [<ffffffc0006c9bd4>] __dev_change_flags+0x94/0x150
  802. [   14.635120] [<ffffffc0006c9d48>] dev_change_flags+0x30/0x78
  803. [   14.635131] [<ffffffc000734670>] devinet_ioctl+0x6a8/0x750
  804. [   14.635182] [<ffffffc0006ab138>] sock_do_ioctl+0x40/0x88
  805. [   14.635192] [<ffffffc0006ab688>] sock_ioctl+0x250/0x328
  806. [   14.635203] [<ffffffc0001d27b0>] do_vfs_ioctl+0x350/0x5b0
  807. [   14.635345] [<ffffffc0001d2aa4>] SyS_ioctl+0x94/0xa8
  808. [   14.635352] ---[ end trace 2885816512522c53 ]---
  809. [   14.635357] Current_V is : 0
  810. [   14.721329] Adding 254520k swap on /dev/zram0.  Priority:5 extents:1 across:254520k SS
  811. [   14.750485] Adding 254520k swap on /dev/zram1.  Priority:5 extents:1 across:254520k SS
  812. [   14.771895] Adding 254520k swap on /dev/zram2.  Priority:5 extents:1 across:254520k SS
  813. [   14.794491] Adding 254520k swap on /dev/zram3.  Priority:5 extents:1 across:254520k SS
  814. [   14.959667] libphy: 1c30000.eth: probed
  815. [   14.959815] sunxi-gmac 1c30000.eth eth0: eth0: PHY ID 001cc915 at 0 IRQ poll (1c30000.eth-0:00)
  816. [   14.959821] init ephy for pine64
  817. [   15.331120] CPU Budget:update CPU 0 cpufreq max to 1152000 min to 480000
  818. [   15.335321] CPU Budget:update CPU 0 cpufreq max to 1152000 min to 480000
  819. [   15.341021] CPU Budget:update CPU 0 cpufreq max to 1152000 min to 480000
  820. [   15.345208] CPU Budget:update CPU 0 cpufreq max to 1152000 min to 480000
  821. [   18.886156] libphy: 1c30000.eth-0:00 - Link is Up - 100/Full
  822. [   32.114944] cgroup: systemd (1) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
  823. [  160.239311]
  824.                
  825.                rmmod_host_driver
  826.  
  827. [  160.239355] [ehci0-controller]: sunxi_usb_disable_ehci
  828. [  160.239372] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000cad958
  829. [  160.239404] scene_lock_destroy name=ehci_standby
  830. [  160.239427] sunxi-ehci 1c1a000.ehci0-controller: remove, state 4
  831. [  160.239450] sunxi-ehci 1c1a000.ehci0-controller: roothub graceful disconnect
  832. [  160.239477] usb usb1: USB disconnect, device number 1
  833. [  160.239490] usb usb1: unregistering device
  834. [  160.239505] usb usb1: unregistering interface 1-0:1.0
  835. [  160.242486] usb usb1: usb_disable_device nuking all URBs
  836. [  160.243982] sunxi-ehci 1c1a000.ehci0-controller: stop
  837. [  160.244027] sunxi-ehci 1c1a000.ehci0-controller: reset command 0010006 (park)=0 ithresh=1 period=512 Reset HALT
  838. [  160.244166] sunxi-ehci 1c1a000.ehci0-controller: irq normal 0 err 0 iaa 0 (lost 0)
  839. [  160.244182] sunxi-ehci 1c1a000.ehci0-controller: complete 0 unlink 0
  840. [  160.244205] sunxi-ehci 1c1a000.ehci0-controller: ehci_stop completed status 1000 Halt
  841. [  160.244248] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
  842. [  160.244301] [ohci0-controller]: sunxi_usb_disable_ohci
  843. [  160.244316] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000cad4b8
  844. [  160.244328] scene_lock_destroy name=ohci_standby
  845. [  160.244344] sunxi-ohci 1c1a000.ohci0-controller: remove, state 4
  846. [  160.244600] sunxi-ohci 1c1a000.ohci0-controller: roothub graceful disconnect
  847. [  160.244630] usb usb3: USB disconnect, device number 1
  848. [  160.244644] usb usb3: unregistering device
  849. [  160.244659] usb usb3: unregistering interface 3-0:1.0
  850. [  160.247147] usb usb3: usb_disable_device nuking all URBs
  851. [  160.249345] sunxi-ohci 1c1a000.ohci0-controller: OHCI controller state
  852. [  160.249379] sunxi-ohci 1c1a000.ohci0-controller: OHCI 1.0, NO legacy support registers, rh state suspended
  853. [  160.249401] sunxi-ohci 1c1a000.ohci0-controller: control 0x4c3 RWE HCFS=suspend CBSR=3
  854. [  160.249419] sunxi-ohci 1c1a000.ohci0-controller: cmdstatus 0x00000 SOC=0
  855. [  160.249438] sunxi-ohci 1c1a000.ohci0-controller: intrstatus 0x00000004 SF
  856. [  160.249456] sunxi-ohci 1c1a000.ohci0-controller: intrenable 0x8000005a MIE RHSC UE RD WDH
  857. [  160.249475] sunxi-ohci 1c1a000.ohci0-controller: hcca frame #0065
  858. [  160.249494] sunxi-ohci 1c1a000.ohci0-controller: roothub.a 02001201 POTPGT=2 NOCP NPS NDP=1(1)
  859. [  160.249511] sunxi-ohci 1c1a000.ohci0-controller: roothub.b 00000000 PPCM=0000 DR=0000
  860. [  160.249527] sunxi-ohci 1c1a000.ohci0-controller: roothub.status 00008000 DRWE
  861. [  160.249547] sunxi-ohci 1c1a000.ohci0-controller: roothub.portstatus [0] 0x00000100 PPS
  862. [  160.249677] sunxi-ohci 1c1a000.ohci0-controller: USB bus 3 deregistered
  863. [  179.635520] [sw_udc]: alloc request: ep(0xffffffc000be6220, ep0, 64), req(0xffffffc076a625c0)
  864. [  179.635566] [sw_udc]: sunxi_udc_set_selfpowered_2320: usb device is not active
  865. [  179.648255] g_serial gadget: Gadget Serial v2.4
  866. [  179.648281] g_serial gadget: g_serial ready
  867. [  179.648291] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'g_serial'
  868. [  190.662239]
  869.                
  870.                insmod_device_driver
  871.  
  872. [  190.662277] [sw_udc]: sunxi_usb_device_enable start
  873. [  190.662288] [sw_udc]: open_usb_clock
  874. [  190.662357] [sw_udc]: usbd_stop_work
  875. [  190.662416] [sw_udc]: sunxi_usb_device_enable end
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top