API tools faq
paste
Guest User

apalis tk1 274b

a guest
Oct 31st, 2017
730
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 52.35 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2016.11-2.7.4+g1b121c6 (Oct 06 2017 - 22:43:32 +0000)
  2.  
  3. TEGRA124
  4. DRAM: 2 GiB
  5. MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1, Tegra SD/MMC: 2
  6. In: serial
  7. Out: serial
  8. Err: serial
  9. Model: Toradex Apalis TK1 2GB V1.1A, Serial# 02882599
  10. Net: No ethernet found.
  11. Hit any key to stop autoboot: 0
  12. Booting from internal eMMC chip...
  13. reading tegra124-apalis-eval.dtb
  14. 50101 bytes read in 16 ms (3 MiB/s)
  15. reading uImage
  16. 5481968 bytes read in 139 ms (37.6 MiB/s)
  17. ## Booting kernel from Legacy Image at 81000000 ...
  18. Image Name: Linux-3.10.40-2.7.4+ge963625
  19. Image Type: ARM Linux Kernel Image (uncompressed)
  20. Data Size: 5481904 Bytes = 5.2 MiB
  21. Load Address: 80008000
  22. Entry Point: 80008000
  23. Verifying Checksum ... OK
  24. ## Flattened Device Tree blob at 82000000
  25. Booting using the fdt blob at 0x82000000
  26. Loading Kernel Image ... OK
  27. Using Device Tree in place at 82000000, end 8200f3b4
  28.  
  29. Starting kernel ...
  30.  
  31. [ 0.000000] Booting Linux on physical CPU 0x0
  32. [ 0.000000] Initializing cgroup subsys cpu
  33. [ 0.000000] Initializing cgroup subsys cpuacct
  34. [ 0.000000] Linux version 3.10.40-2.7.4+ge963625 (yocto@f074f422a215) (gcc version 6.2.1 20161016 (Linaro GCC 6.2-2016.11) ) #1 SMP PREEMPT Fri Oct 6 23:10:37 UTC 2017
  35. [ 0.000000] CPU: ARMv7 Processor [413fc0f3] revision 3 (ARMv7), cr=30c7387d
  36. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  37. [ 0.000000] Machine: apalis-tk1, model: Toradex Apalis TK1 on Apalis Evaluation Board, serial: 0
  38. [ 0.000000] Tegra reserved memory:
  39. [ 0.000000] LP0: f46ff000 - f46ff80f
  40. [ 0.000000] Bootloader framebuffer: 00000000 - 00000000
  41. [ 0.000000] Bootloader framebuffer2: 00000000 - 00000000
  42. [ 0.000000] Framebuffer: fa500000 - fb6fffff
  43. [ 0.000000] 2nd Framebuffer: fb700000 - ffefffff
  44. [ 0.000000] Carveout: 00000000 - 00000000
  45. [ 0.000000] Vpr: 00000000 - 00000000
  46. [ 0.000000] Tsec: 00000000 - 00000000
  47. [ 0.000000] cma: CMA: reserved 16 MiB at ae800000
  48. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  49. [ 0.000000] DTS File Name: /workdir/build/tmp-glibc/work-shared/apalis-tk1/kernel-source/arch/arm/boot/dts/tegra124-apalis-eval.dts
  50. [ 0.000000] Tegra12: CPU Speedo value 2264, Soc Speedo value 2227, Gpu Speedo value 2091
  51. [ 0.000000] Tegra12: CPU Speedo ID 5, Soc Speedo ID 0, Gpu Speedo ID 1
  52. [ 0.000000] Tegra12: CPU Process ID 0,Soc Process ID 1,Gpu Process ID 0
  53. [ 0.000000] Tegra Revision: A01 SKU: 0x87 CPU Process: 0 Core Process: 1
  54. [ 0.000000] tegra: PLLP fixed rate: 408000000
  55. [ 0.000000] tegra_clk_shared_bus_user_init: c2bus client se left ON
  56. [ 0.000000] tegra_clk_shared_bus_user_init: c4bus client vi left ON
  57. [ 0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1044000000
  58. [ 0.000000] Lowering sbus maximum rate from 420000000 to 372000000
  59. [ 0.000000] Lowering vic03 maximum rate from 900000000 to 756000000
  60. [ 0.000000] Lowering tsec maximum rate from 900000000 to 756000000
  61. [ 0.000000] Lowering msenc maximum rate from 600000000 to 480000000
  62. [ 0.000000] Lowering se maximum rate from 600000000 to 480000000
  63. [ 0.000000] Lowering vde maximum rate from 600000000 to 480000000
  64. [ 0.000000] Lowering host1x maximum rate from 500000000 to 408000000
  65. [ 0.000000] Lowering vi maximum rate from 700000000 to 600000000
  66. [ 0.000000] Lowering isp maximum rate from 700000000 to 600000000
  67. [ 0.000000] Lowering c4bus maximum rate from 700000000 to 600000000
  68. [ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
  69. [ 0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1066000000
  70. [ 0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1066000000
  71. [ 0.000000] Lowering hdmi maximum rate from 594000000 to 297000000
  72. [ 0.000000] Lowering sdmmc1 maximum rate from 208000000 to 204000000
  73. [ 0.000000] Lowering sdmmc3 maximum rate from 208000000 to 204000000
  74. [ 0.000000] Lowering gbus maximum rate from 1032000000 to 852000000
  75. [ 0.000000] Lowering cpu_g maximum rate from 3000000000 to 2065500000
  76. [ 0.000000] tegra dvfs: VDD_CPU nominal 1260mV, scaling enabled
  77. [ 0.000000] tegra dvfs: VDD_CORE nominal 1150mV, scaling enabled
  78. [ 0.000000] tegra dvfs: VDD_GPU nominal 1200mV, scaling enabled
  79. [ 0.000000] Switching to timer-based delay loop
  80. [ 0.000000] tegra_powergate_init: DONE
  81. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1c2e000 s15156 r8192 d13516 u36864
  82. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 498960
  83. [ 0.000000] Kernel command line: lp0_vec=2064@0xf46ff000 core_edp_mv=1150 core_edp_ma=4000 usb_port_owner_info=2 lane_owner_info=6 emc_max_dvfs=0 ip=off root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait igb_mac=00:14:2d:2b:fc:27 consoleblank=0 no_console_suspend=1 console=tty1 console=ttyS0,115200n8 debug_uartport=lsport,0 video=tegrafb0:640x480-16@60 fbcon=map:1
  84. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  85. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  86. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  87. [ 0.000000] Memory: 1955MB = 1955MB total
  88. [ 0.000000] Memory: 1955624k/1955624k available, 140504k reserved, 1223676K highmem
  89. [ 0.000000] Virtual kernel memory layout:
  90. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  91. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  92. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  93. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  94. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  95. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  96. [ 0.000000] .text : 0xc0008000 - 0xc09f2778 (10154 kB)
  97. [ 0.000000] .init : 0xc09f3000 - 0xc0a66b34 ( 463 kB)
  98. [ 0.000000] .data : 0xc0a68000 - 0xc0b55bb0 ( 951 kB)
  99. [ 0.000000] .bss : 0xc0b55bb0 - 0xc0bf0db8 ( 621 kB)
  100. [ 0.000000] Preemptible hierarchical RCU implementation.
  101. [ 0.000000] NR_IRQS:960
  102. [ 0.000000] the number of interrupt controllers found is 5
  103. [ 0.000000] Architected local timer running at 12.00MHz (phys).
  104. [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 83ns, wraps every 2863311536128ns
  105. [ 0.000000] Ignoring duplicate/late registration of read_current_timer delay
  106. [ 0.000000] Console: colour dummy device 80x30
  107. [ 0.000000] console [tty1] enabled
  108. [ 0.003573] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=12000
  109. [ 0.003643] pid_max: default: 32768 minimum: 301
  110. [ 0.003997] Mount-cache hash table entries: 512
  111. [ 0.024898] Initializing cgroup subsys debug
  112. [ 0.024943] Initializing cgroup subsys freezer
  113. [ 0.025024] CPU: Testing write buffer coherency: ok
  114. [ 0.025098] ftrace: allocating 30371 entries in 60 pages
  115. [ 0.065470] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  116. [ 0.065510] Setting up static identity map for 0xc0726978 - 0xc0726a08
  117. [ 0.069513] ftrace: Allocated trace_printk buffers
  118. [ 0.076203] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  119. [ 0.079216] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  120. [ 0.082246] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  121. [ 0.082376] Brought up 4 CPUs
  122. [ 0.082435] SMP: Total of 4 processors activated.
  123. [ 0.082452] CPU: All CPU(s) started in SVC mode.
  124. [ 0.083553] devtmpfs: initialized
  125. [ 0.092403] pinctrl core: initialized pinctrl subsystem
  126. [ 0.092794] regulator-dummy: no parameters
  127. [ 0.093660] NET: Registered protocol family 16
  128. [ 0.095985] DMA: preallocated 256 KiB pool for atomic coherent allocations
  129. [ 0.097277] tegra_smmu tegra_smmu: Loaded Tegra IOMMU driver
  130. [ 0.098728] console [pstore-1] enabled
  131. [ 0.098766] ramoops: attached 0x200000@0xfa300000, ecc: 0/0
  132. [ 0.099157] cpuidle: using governor ladder
  133. [ 0.099179] cpuidle: using governor menu
  134. [ 0.102543] apalis_tk1_camera_auxdata: update camera lookup table.
  135. [ 0.111825] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name default
  136. [ 0.112271] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
  137. [ 0.119795] Wake16 for irq=34
  138. [ 0.122412] Wake58 for irq=81
  139. [ 0.122461] Wake41 for irq=129
  140. [ 0.122480] Wake43 for irq=129
  141. [ 0.122525] Wake40 for irq=53
  142. [ 0.122542] Wake42 for irq=53
  143. [ 0.125655] Selecting UARTA as the debug console
  144. [ 0.125703] The debug console clock name is uarta
  145. [ 0.127637] PMC DT attribute sysclkreq_high=0, board value=1
  146. [ 0.127663] PMC DT attribute corereq_high=0, board value=1
  147. [ 0.127685] PMC DT attribute cpu_off_timer=0, board value=300
  148. [ 0.127708] PMC DT attribute cpu_timer=0, board value=500
  149. [ 0.127728] PMC DT attribute suspend_mode=0, board value=2
  150. [ 0.128199] Clear bootloader IO dpd settings
  151. [ 0.128359] Loading Apalis TK1 EMC tables.
  152. [ 0.128604] tegra: pll_m is selected as scalable EMC clock source
  153. [ 0.128649] Lowering emc maximum rate from 1200000000 to 924000000
  154. [ 0.128677] tegra: validated EMC DFS table
  155. [ 0.128754] apalis_tk1_edp_init: CPU regulator 12500 mA
  156. [ 0.384478] apalis_tk1_edp_init: GPU regulator 11400 mA
  157. [ 0.385454] swapper/0 isomgr_init(): iso emc max clk=924000KHz
  158. [ 0.385475] swapper/0 isomgr_init(): max_iso_bw=7392000KB[ 0.472611] platform tegradc.0: IOVA linear map 0x00000000fa500000(1200000)
  159. [ 0.475978] platform tegradc.0: IOVA linear map 0x00000000fb700000(4800000)
  160. [ 0.481009] platform tegradc.1: IOVA linear map 0x00000000fa500000(1200000)
  161. [ 0.484361] platform tegradc.1: IOVA linear map 0x00000000fb700000(4800000)
  162. [ 0.485211] FUSE: cp_rev 0 ft_rev 0
  163. [ 0.485395] tegra11_soctherem_oc_int_init(): OC interrupts are not enabled
  164. [ 0.485627] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  165. [ 0.485657] hw-breakpoint: maximum watchpoint size is 8 bytes.
  166. [ 0.486009] mc-err: Started MC error interface!
  167. [ 0.496718] bio: create slab <bio-0> at 0
  168. [ 0.497986] reg-fixed-voltage 1.regulator: Consumer c1 does not have device name
  169. [ 0.498023] reg-fixed-voltage 1.regulator: Consumer c2 does not have device name
  170. [ 0.498184] +V3.3_MXM: 3300 mV
  171. [ 0.499021] SCSI subsystem initialized
  172. [ 0.499444] usbcore: registered new interface driver usbfs
  173. [ 0.499520] usbcore: registered new interface driver hub
  174. [ 0.499636] usbcore: registered new device driver usb
  175. [ 0.503270] Wake18 for irq=118
  176. [ 0.504232] as3722 4-0040: AS3722 ID: ID1:ID2:ID3 = 0x0c:0x01:0x05
  177. [ 0.504263] as3722 4-0040: Device version 1V1 and platform version 1V2
  178. [ 0.504288] as3722 4-0040: Final OTP version 1V2
  179. [ 0.505144] Wake18 for irq=118
  180. [ 0.507721] gpiochip_add: registered GPIOs 1016 to 1023 on device: as3722-gpio
  181. [ 0.507940] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  182. [ 0.508004] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  183. [ 0.508061] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  184. [ 0.508094] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
  185. [ 0.508126] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
  186. [ 0.508157] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
  187. [ 0.508252] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
  188. [ 0.508286] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
  189. [ 0.508317] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
  190. [ 0.508395] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  191. [ 0.508427] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
  192. [ 0.508459] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
  193. [ 0.508490] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
  194. [ 0.508521] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
  195. [ 0.508554] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
  196. [ 0.508586] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
  197. [ 0.508617] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
  198. [ 0.508649] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
  199. [ 0.508681] as3722-regulator as3722-regulator.0: Consumer c11 does not have device name
  200. [ 0.508713] as3722-regulator as3722-regulator.0: Consumer c12 does not have device name
  201. [ 0.508745] as3722-regulator as3722-regulator.0: Consumer c13 does not have device name
  202. [ 0.508776] as3722-regulator as3722-regulator.0: Consumer c14 does not have device name
  203. [ 0.508808] as3722-regulator as3722-regulator.0: Consumer c15 does not have device name
  204. [ 0.508839] as3722-regulator as3722-regulator.0: Consumer c16 does not have device name
  205. [ 0.508876] as3722-regulator as3722-regulator.0: Consumer c19 does not have device name
  206. [ 0.508908] as3722-regulator as3722-regulator.0: Consumer c20 does not have device name
  207. [ 0.508939] as3722-regulator as3722-regulator.0: Consumer c21 does not have device name
  208. [ 0.508970] as3722-regulator as3722-regulator.0: Consumer c22 does not have device name
  209. [ 0.509047] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  210. [ 0.509079] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
  211. [ 0.509137] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  212. [ 0.509169] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
  213. [ 0.509201] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
  214. [ 0.509248] as3722-regulator as3722-regulator.0: Consumer c4 does not have device name
  215. [ 0.509281] as3722-regulator as3722-regulator.0: Consumer c5 does not have device name
  216. [ 0.509312] as3722-regulator as3722-regulator.0: Consumer c6 does not have device name
  217. [ 0.509343] as3722-regulator as3722-regulator.0: Consumer c7 does not have device name
  218. [ 0.509375] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
  219. [ 0.509406] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
  220. [ 0.509460] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
  221. [ 0.509538] as3722-regulator as3722-regulator.0: Consumer c8 does not have device name
  222. [ 0.509569] as3722-regulator as3722-regulator.0: Consumer c9 does not have device name
  223. [ 0.509601] as3722-regulator as3722-regulator.0: Consumer c10 does not have device name
  224. [ 0.509635] as3722-regulator as3722-regulator.0: Consumer c12 does not have device name
  225. [ 0.509690] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  226. [ 0.509744] as3722-regulator as3722-regulator.0: Consumer c1 does not have device name
  227. [ 0.509775] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
  228. [ 0.509806] as3722-regulator as3722-regulator.0: Consumer c3 does not have device name
  229. [ 0.509860] as3722-regulator as3722-regulator.0: Consumer c2 does not have device name
  230. [ 0.510842] +VDD_CPU_AP: 650 <--> 1300 mV at 1000 mV 3500 mA
  231. [ 0.511639] +VDD_CORE: applied init 1150000uV constraint
  232. [ 0.512242] +VDD_CORE: 700 <--> 1350 mV at 1150 mV 3500 mA
  233. [ 0.513436] +V1.35_VDDIO_DDR(sd2): 1350 mV
  234. [ 0.513773] as3722-sd3: no parameters
  235. [ 0.514093] +V1.05: 1050 mV
  236. [ 0.514963] +V1.8: 1800 mV
  237. [ 0.515351] +VDD_GPU_AP: applied init 1000000uV constraint
  238. [ 0.516228] +VDD_GPU_AP: 650 <--> 1200 mV at 1000 mV 3500 mA
  239. [ 0.516760] +V1.05_AVDD: 1050 mV at 300 mA
  240. [ 0.517604] VDDIO_SDMMC1: 1800 <--> 3300 mV at 3300 mV at 150 mA
  241. [ 0.518276] +V1.2: 1200 mV at 150 mA
  242. [ 0.519533] +V1.05_RTC: 1000 mV at 150 mA
  243. [ 0.520010] AVDD_LVDS0_PLL: applied init 1800000uV constraint
  244. [ 0.520048] AVDD_LVDS0_PLL: 1800 <--> 3300 mV at 1800 mV at 150 mA
  245. [ 0.520409] as3722-ldo5: at 150 mA
  246. [ 0.520765] VDDIO_SDMMC3: 1800 <--> 3300 mV at 150 mA
  247. [ 0.521115] as3722-ldo7: at 150 mA
  248. [ 0.521780] +V3.3_ETH(ldo9): 3300 mV at 150 mA
  249. [ 0.522280] +V3.3_ETH(ldo10): 3300 mV at 150 mA
  250. [ 0.522790] +V1.8_VPP_FUSE: 1800 mV at 150 mA
  251. [ 0.523867] Linux video capture interface: v2.00
  252. [ 0.523924] pps_core: LinuxPPS API ver. 1 registered
  253. [ 0.523945] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  254. [ 0.523989] PTP clock support registered
  255. [ 0.524818] Advanced Linux Sound Architecture Driver Initialized.
  256. [ 0.525796] +V1.05_AVDD_HDMI_PLL: 1050 mV
  257. [ 0.525850] +V1.05_AVDD_HDMI_PLL: supplied by +V1.05
  258. [ 0.526065] reg-fixed-sync-voltage 2.regulator: Consumer c7 does not have device name
  259. [ 0.526100] reg-fixed-sync-voltage 2.regulator: Consumer c8 does not have device name
  260. [ 0.526137] reg-fixed-sync-voltage 2.regulator: Consumer c11 does not have device name
  261. [ 0.526177] reg-fixed-sync-voltage 2.regulator: Consumer c15 does not have device name
  262. [ 0.526209] reg-fixed-sync-voltage 2.regulator: Consumer c16 does not have device name
  263. [ 0.526240] reg-fixed-sync-voltage 2.regulator: Consumer c17 does not have device name
  264. [ 0.526272] reg-fixed-sync-voltage 2.regulator: Consumer c18 does not have device name
  265. [ 0.527009] +V3.3: 3300 mV
  266. [ 0.527283] reg-fixed-sync-voltage 3.regulator: Consumer c3 does not have device name
  267. [ 0.527421] 5V_SW: 5000 mV
  268. [ 0.527763] VCC_USBO1: 5000 mV
  269. [ 0.528105] VCC_USBH(2A|2C|2D|3|4): 5000 mV
  270. [ 0.528283] reg-fixed-sync-voltage 6.regulator: Consumer c1 does not have device name
  271. [ 0.528318] reg-fixed-sync-voltage 6.regulator: Consumer c2 does not have device name
  272. [ 0.528475] BKL1_ON: 3300 mV
  273. [ 0.533900] tegra: failed to map regulator to power detect cell pwrdet_cam(-517)
  274. [ 0.533940] tegra: failed to map regulator to power detect cell pwrdet_pex_ctl(-517)
  275. [ 0.534264] tegra: failed regulators mapping - io power detection is left always on
  276. [ 0.534293] Switching to clocksource arch_sys_counter
  277. [ 0.556609] nvmap_heap_init: nvmap_heap_init: created heap block cache
  278. [ 0.556786] nvmap_page_pool_init: Total MB RAM: 1925
  279. [ 0.556810] nvmap_page_pool_init: nvmap page pool size: 61625 pages (240 MB)
  280. [ 0.556955] nvmap_background_zero_thread: PP zeroing thread starting.
  281. [ 0.557124] iram: dma coherent mem declare 0x0000000040001000,258048
  282. [ 0.557976] misc nvmap: created heap iram base 0x40001000 size (252KiB)
  283. [ 0.558142] nvmap:inner cache maint threshold=2097152
  284. [ 0.568197] Wake39 for irq=52
  285. [ 0.568291] tegra-otg tegra-otg: otg transceiver registered
  286. [ 0.568671] NET: Registered protocol family 2
  287. [ 0.569467] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  288. [ 0.569670] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  289. [ 0.569862] TCP: Hash tables configured (established 8192 bind 8192)
  290. [ 0.569923] TCP: reno registered
  291. [ 0.569948] UDP hash table entries: 512 (order: 2, 16384 bytes)
  292. [ 0.570004] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  293. [ 0.570382] NET: Registered protocol family 1
  294. [ 0.570795] RPC: Registered named UNIX socket transport module.
  295. [ 0.570820] RPC: Registered udp transport module.
  296. [ 0.570840] RPC: Registered tcp transport module.
  297. [ 0.570859] RPC: Registered tcp NFSv4.1 backchannel transport module.
  298. [ 0.571153] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
  299. [ 0.576974] host1x host1x: initialized
  300. [ 0.578132] CPU PMU: probing PMU on CPU 0
  301. [ 0.578167] hw perfevents: enabled with ARMv7 Cortex-A15 PMU driver, 7 counters available
  302. [ 0.578825] tegra_throttle : init passed
  303. [ 0.578945] Tegra cpuquiet initialized: disabled
  304. [ 0.579102] cpu-tegra: init EDP limit: 2065 MHz
  305. [ 0.580126] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type CPU-therm
  306. [ 0.580564] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type GPU-therm
  307. [ 0.580825] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type MEM-therm
  308. [ 0.581083] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
  309. [ 0.582736] bounce pool size: 64 pages
  310. [ 0.584492] NFS: Registering the id_resolver key type
  311. [ 0.584549] Key type id_resolver registered
  312. [ 0.584571] Key type id_legacy registered
  313. [ 0.584601] Installing knfsd (copyright (C) 1996 [email protected]).
  314. [ 0.585236] NTFS driver 2.1.30 [Flags: R/O].
  315. [ 0.585569] fuse init (API version 7.22)
  316. [ 0.585958] msgmni has been set to 1461
  317. [ 0.588384] io scheduler noop registered (default)
  318. [ 0.588818] PCIE.C: tegra_pcie_enable_regulators : regulator hvdd_pex
  319. [ 0.588919] PCIE.C: tegra_pcie_enable_regulators : regulator pexio
  320. [ 0.589004] PCIE.C: tegra_pcie_enable_regulators : regulator avdd_plle
  321. [ 1.294621] PCIE: port 0: link down, retrying
  322. [ 1.696817] PCIE: port 0: link down, retrying
  323. [ 2.099009] PCIE: port 0: link down, retrying
  324. [ 2.301103] PCIE: port 0: link down, ignoring
  325. [ 2.315286] PCI host bridge to bus 0000:00
  326. [ 2.315316] pci_bus 0000:00: root bus resource [mem 0x32100000-0x3fffffff]
  327. [ 2.315346] pci_bus 0000:00: root bus resource [mem 0x12100000-0x320fffff pref]
  328. [ 2.315397] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
  329. [ 2.315426] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  330. [ 2.315834] PCI: bus0: Fast back to back transfers disabled
  331. [ 2.315864] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  332. [ 2.318432] PCI: bus1: Fast back to back transfers disabled
  333. [ 2.318777] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
  334. [ 2.318807] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
  335. [ 2.319056] pcieport 0000:00:00.0: BAR 8: assigned [mem 0x32100000-0x321fffff]
  336. [ 2.319090] pcieport 0000:00:00.0: BAR 7: assigned [io 0x1000-0x1fff]
  337. [ 2.319122] pci 0000:01:00.0: BAR 0: assigned [mem 0x32100000-0x3211ffff]
  338. [ 2.319156] pci 0000:01:00.0: BAR 3: assigned [mem 0x32120000-0x32123fff]
  339. [ 2.319188] pci 0000:01:00.0: BAR 2: assigned [io 0x1000-0x101f]
  340. [ 2.319219] pcieport 0000:00:00.0: PCI bridge to [bus 01]
  341. [ 2.319244] pcieport 0000:00:00.0: bridge window [io 0x1000-0x1fff]
  342. [ 2.319273] pcieport 0000:00:00.0: bridge window [mem 0x32100000-0x321fffff]
  343. [ 2.319315] PCIE: No Link speed change happened
  344. [ 2.319766] pwm-backlight pwm-backlight: unable to request PWM, trying legacy API
  345. [ 2.319875] sysedp_create_consumer: unable to create pwm-backlight, no consumer_data for pwm-backlight found
  346. [ 2.320813] tsec tsec: initialized
  347. [ 2.322307] isp isp.0: initialized
  348. [ 2.323326] isp isp.1: initialized
  349. [ 2.324959] falcon vic03.0: initialized
  350. [ 2.326190] falcon msenc: initialized
  351. [ 2.328117] tegradc tegradc.0: probed
  352. [ 2.328383] tegradc tegradc.0: parse cmd options for tegrafb0: 640x480-16@60
  353. [ 2.328424] tegradc tegradc.0: switching framebuffer to 640x480
  354. [ 2.328450] tegradc tegradc.0: Calculated sync href=0 vref=1
  355. [ 2.328478] tegradc tegradc.0: using mode 640x480 pclk=25175000 href=0 vref=1
  356. [ 2.362308] tegradc tegradc.0: nominal-pclk:25175000 parent:25125000 div:1.0 pclk:25125000 24923250~27440750
  357. [ 2.379607] tegradc tegradc.0: fb registered
  358. [ 2.380326] gpio wake4 for gpio=111
  359. [ 2.381295] tegradc tegradc.1: probed
  360. [ 2.382435] tegradc tegradc.1: use default mode for tegrafb1: 1920x1080-16@60
  361. [ 2.382490] tegradc tegradc.1: switching framebuffer to 1920x1080
  362. [ 2.382519] tegradc tegradc.1: using mode 1920x1080 pclk=148500000 href=1 vref=1
  363. [ 2.382902] tegradc tegradc.1: switching framebuffer to 1920x1080
  364. [ 2.382912] tegradc tegradc.1: using mode 1920x1080 pclk=148500000 href=1 vref=1
  365. [ 2.394229] Console: switching to colour frame buffer device 240x67
  366. [ 2.405296] tegradc tegradc.1: fb registered
  367. [ 2.405392] hdmi_state_machine_worker (tid edb875c0): state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
  368. [ 2.405508] hdmi_state_machine_set_state_l: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
  369. [ 2.408856] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
  370. [ 2.409608] Serial: 8250/16550 driver, 9 ports, IRQ sharing disabled
  371. [ 2.411871] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
  372. [ 2.446839] hdmi_state_machine_worker (tid edb875c0): state 0 (Reset), hpd 0, pending_hpd_evt 0
  373. [ 2.446842] hdmi_disable_l: audio_switch 0
  374. [ 2.446845] hdmi_disable_l: hpd_switch 0
  375. [ 2.446851] hdmi_state_machine_set_state_l: switching from state 0 (Reset) to state 1 (Check Plug)
  376. [ 2.462620] hdmi_state_machine_worker (tid edb875c0): state 1 (Check Plug), hpd 0, pending_hpd_evt 0
  377. [ 2.462624] hdmi_disable_l: audio_switch 0
  378. [ 2.462627] hdmi_disable_l: hpd_switch 0
  379. [ 2.462632] hdmi_state_machine_set_state_l: switching from state 1 (Check Plug) to state 3 (Disabled)
  380. [ 4.539639] console [ttyS0] enabled
  381. [ 4.543671] serial-tegra.1: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
  382. [ 4.551700] serial-tegra.2: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
  383. [ 4.559722] serial-tegra.3: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA
  384. [ 4.573045] loop: module loaded
  385. [ 4.576386] nct1008_nct72 4-004c: success in enabling rail vdd_nct72
  386. [ 4.586467] gpio wake35 for gpio=70
  387. [ 4.590100] nct1008_nct72 4-004c: nct1008_probe: initialized
  388. [ 4.596420] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type Tboard_tegra
  389. [ 4.606234] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
  390. [ 4.616747] tegra_profiler: Branch: Dev
  391. [ 4.620643] tegra_profiler: Version: 1.103
  392. [ 4.624794] tegra_profiler: Samples version: 34
  393. [ 4.629380] tegra_profiler: IO version: 18
  394. [ 4.633532] armv7_pmu: arch: Cortex A15, type: 4, ver: 0
  395. [ 4.639105] tegra_profiler: auth: init
  396. [ 4.643212] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
  397. [ 4.650933] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
  398. [ 4.660208] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
  399. [ 4.669963] scsi0 : tegra-sata
  400. [ 4.673453] scsi1 : tegra-sata
  401. [ 4.676762] ata1: SATA max UDMA/133 irq 55
  402. [ 4.680950] ata2: DUMMY
  403. [ 4.685525] gpio wake34 for gpio=82
  404. [ 4.694050] tun: Universal TUN/TAP device driver, 1.6
  405. [ 4.701925] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  406. [ 4.711079] CAN device driver interface
  407. [ 4.717757] Intel(R) Gigabit Ethernet Network Driver - version 5.3.5.4
  408. [ 4.727179] Copyright (c) 2007-2015 Intel Corporation.
  409. [ 4.777830] igb 0000:01:00.0: added PHC on eth0
  410. [ 4.785205] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
  411. [ 4.794937] igb 0000:01:00.0: eth0: (PCIe:2.5GT/s:Width x1)
  412. [ 4.803397] igb 0000:01:00.0 eth0: MAC: 00:14:2d:2b:fc:27
  413. [ 4.811568] igb 0000:01:00.0: eth0: PBA No: Unknown
  414. [ 4.819257] igb 0000:01:00.0: LRO is disabled
  415. [ 4.826380] igb 0000:01:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
  416. [ 4.836865] usbcore: registered new interface driver asix
  417. [ 4.845180] usbcore: registered new interface driver ax88179_178a
  418. [ 4.854149] usbcore: registered new interface driver cdc_ether
  419. [ 4.862843] usbcore: registered new interface driver cdc_subset
  420. [ 4.871617] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  421. [ 4.881136] ehci-pci: EHCI PCI platform driver
  422. [ 4.888659] tegra_xusb_read_usb_calib: usb_calib0 = 0x02c5838b
  423. [ 4.897751] usbcore: registered new interface driver usb-storage
  424. [ 4.906701] usbcore: registered new interface driver usbserial
  425. [ 4.915404] usbcore: registered new interface driver usbserial_generic
  426. [ 4.924780] usbserial: USB Serial support registered for generic
  427. [ 4.933650] usbcore: registered new interface driver pl2303
  428. [ 4.942062] usbserial: USB Serial support registered for pl2303
  429. [ 4.950896] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
  430. [ 4.961166] tegra USB phy - inst[0] platform info:
  431. [ 4.968786] port_otg: yes
  432. [ 4.974216] has_hostpc: yes
  433. [ 4.979762] phy_interface: USB_PHY_INTF_UTMI
  434. [ 4.986781] op_mode: TEGRA_USB_OPMODE_DEVICE
  435. [ 4.988409] ata1: SATA link down (SStatus 0 SControl 300)
  436. [ 5.001905] qc2_voltage: 0
  437. [ 5.007281] vbus_pmu_irq: 0
  438. [ 5.012692] vbus_gpio: -1
  439. [ 5.017867] charging: disabled
  440. [ 5.023479] remote_wakeup: disabled
  441. [ 5.034793] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
  442. [ 5.049633] as3722-rtc as3722-rtc.1: rtc core: registered as3722 as rtc0
  443. [ 5.058920] as3722-rtc as3722-rtc.1: RTC interrupt 449
  444. [ 5.071062] rtc-ds1307 0-0068: oscillator failed, set time!
  445. [ 5.079419] rtc-ds1307 0-0068: rtc core: registered m41t0 as rtc1
  446. [ 5.088563] tegra_rtc tegra_rtc: rtc core: registered tegra_rtc as rtc2
  447. [ 5.097766] Wake16 for irq=34
  448. [ 5.103300] tegra_rtc tegra_rtc: Tegra internal Real Time Clock
  449. [ 5.111892] i2c /dev entries driver
  450. [ 5.121083] nvavp nvavp: allocated IOVA at 8ff00000 for AVP os
  451. [ 5.130189] tegra_dtv_probe: probing dtv.
  452. [ 5.136854] setup_stream: bufsize = 4096, bufnum = 4
  453. [ 5.142035] usbcore: registered new interface driver uvcvideo
  454. [ 5.153104] USB Video Class driver (1.1.1)
  455. [ 5.160257] zram: Created 1 device(s) ...
  456. [ 5.167549] tegra_wdt tegra_wdt.0: last reset is due to power on reset
  457. [ 5.176867] WDT heartbeat enabled on probe
  458. [ 5.183607] tegra_wdt_probe done
  459. [ 5.189692] sdhci: Secure Digital Host Controller Interface driver
  460. [ 5.198468] otg state changed: SUSPEND --> HOST
  461. [ 5.205572] sdhci: Copyright(c) Pierre Ossman
  462. [ 5.205763] tegra USB phy - inst[0] platform info:
  463. [ 5.205766] port_otg: yes
  464. [ 5.205768] has_hostpc: yes
  465. [ 5.205771] phy_interface: USB_PHY_INTF_UTMI
  466. [ 5.205774] op_mode: TEGRA_USB_OPMODE_HOST
  467. [ 5.205777] qc2_voltage: 0
  468. [ 5.205780] vbus_gpio: -1
  469. [ 5.205782] hot_plug: disabled
  470. [ 5.205784] remote_wakeup: enabled
  471. [ 5.265267] sdhci-pltfm: SDHCI platform and OF driver helper
  472. [ 5.273725] sdhci-tegra sdhci-tegra.3: vddio_sd_slot regulator not found: -517. Assuming vddio_sd_slot is not required.
  473. [ 5.287200] sdhci-tegra sdhci-tegra.3: Speedo value 2227
  474. [ 5.295054] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1150
  475. [ 5.307268] mmc0: no vqmmc regulator found
  476. [ 5.313980] mmc0: no vmmc regulator found
  477. [ 5.320563] mmc0: Invalid maximum block size, assuming 512 bytes
  478. [ 5.329158] sysedp_create_consumer: unable to create sdhci-tegra.3, no consumer_data for sdhci-tegra.3 found
  479. [ 5.362389] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
  480. [ 5.375797] sdhci-tegra sdhci-tegra.0: Speedo value 2227
  481. [ 5.383883] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1150
  482. [ 5.396371] mmc1: no vqmmc regulator found
  483. [ 5.403317] mmc1: no vmmc regulator found
  484. [ 5.410142] mmc1: Invalid maximum block size, assuming 512 bytes
  485. [ 5.419132] sysedp_create_consumer: unable to create sdhci-tegra.0, no consumer_data for sdhci-tegra.0 found
  486. [ 5.454391] mmc1: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
  487. [ 5.468215] sdhci-tegra sdhci-tegra.2: Speedo value 2227
  488. [ 5.476431] sdhci-tegra sdhci-tegra.2: Tuning constraints: nom_mv 1150, boot_mv 1150, min_or_mv 1150
  489. [ 5.488837] mmc2: no vqmmc regulator found
  490. [ 5.495902] mmc2: no vmmc regulator found
  491. [ 5.502841] mmc2: Invalid maximum block size, assuming 512 bytes
  492. [ 5.511814] sysedp_create_consumer: unable to create sdhci-tegra.2, no consumer_data for sdhci-tegra.2 found[ 5.533522] mmc0: BKOPS_EN bit is not set
  493. [ 5.543182] mmc0: new high speed DDR MMC card at address 0001
  494. [ 5.552167] mmcblk mmc0:0001: Card claimed for testing.
  495. [ 5.552398] mmc2: SDHCI controller on sdhci-tegra.2 [sdhci-tegra.2] using ADMA
  496. [ 5.552557] gpio wake56 for gpio=170
  497. [ 5.556111] tegra-se tegra12-se: tegra_se_probe: complete
  498. [ 5.556308] hidraw: raw HID events driver (C) Jiri Kosina
  499. [ 5.556450] usbcore: registered new interface driver usbhid
  500. [ 5.556453] usbhid: USB HID core driver
  501. [ 5.556872] tegra-hier-ictlr tegra-hier-ictlr: probed
  502.  
  503. [ 5.617964] mmcblk0: mmc0:0001 016G30 14.6 GiB
  504. [ 5.628934] mmcblk0boot0: mmc0:0001 016G30 partition 1 4.00 MiB
  505. [ 5.638114] mmcblk0boot1: mmc0:0001 016G30 partition 2 4.00 MiB
  506. [ 5.647221] mmcblk0rpmb: mmc0:0001 016G30 partition 3 4.00 MiB
  507. [ 5.657528] mmcblk0: p1 p2
  508. [ 5.665629] mmcblk0boot1: unknown partition table
  509. [ 5.674998] mmcblk0boot0: unknown partition table
  510. [ 5.729996] usbcore: registered new interface driver snd-usb-audio
  511. [ 5.740128] tegra_offload_platform probe successfull.
  512. [ 5.747833] succefully registered offload opstegra30_avp_audio_platform_probe successful.
  513. [ 5.760587] sgtl5000 4-000a: sgtl5000 revision 0x11
  514. [ 5.771804] 4-000a: 1200 mV normal
  515. [ 5.778512] sgtl5000 4-000a: Using internal LDO instead of VDDD
  516. [ 5.793839] tegra-snd-apalis-tk1-sgtl5000 tegra-snd-apalis-tk1-sgtl5000.0: sgtl5000 <-> tegra30-i2s.2 mapping ok
  517. [ 5.807921] tegra-snd-apalis-tk1-sgtl5000 tegra-snd-apalis-tk1-sgtl5000.0: dit-hifi <-> tegra30-spdif mapping ok
  518. [ 5.823496] oprofile: using timer interrupt.
  519. [ 5.831629] GACT probability NOT on
  520. [ 5.838173] Mirror/redirect action on
  521. [ 5.844848] u32 classifier
  522. [ 5.850540] Actions configured
  523. [ 5.856924] Netfilter messages via NETLINK v0.30.
  524. [ 5.864666] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  525. [ 5.874184] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  526. [ 5.884209] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  527. [ 5.893480] ip_tables: (C) 2000-2006 Netfilter Core Team
  528. [ 5.902037] arp_tables: (C) 2002 David S. Miller
  529. [ 5.909784] TCP: cubic registered
  530. [ 5.916542] NET: Registered protocol family 10
  531. [ 5.925057] mip6: Mobile IPv6
  532. [ 5.931184] ip6_tables: (C) 2000-2006 Netfilter Core Team
  533. [ 5.940409] NET: Registered protocol family 17
  534. [ 5.947972] NET: Registered protocol family 15
  535. [ 5.955450] can: controller area network core (rev 20120528 abi 9)
  536. [ 5.964745] NET: Registered protocol family 29
  537. [ 5.972191] can: raw protocol (rev 20120528)
  538. [ 5.979468] can: broadcast manager protocol (rev 20120528 t)
  539. [ 5.988149] can: netlink gateway (rev 20130117) max_hops=1
  540. [ 5.996711] NET: Registered protocol family 35
  541. [ 6.004167] 8021q: 802.1Q VLAN Support v1.8
  542. [ 6.011466] NET: Registered protocol family 37
  543. [ 6.018869] Key type dns_resolver registered
  544. [ 6.026029] NET: Registered protocol family 41
  545. [ 6.034686] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
  546. [ 6.069984] Registering SWP/SWPB emulation handler
  547. [ 6.077668] last reset is due to power on reset
  548. [ 6.077668]
  549. [ 6.089277] Disabling clocks left on by bootloader:
  550. [ 6.096930] audio_2x
  551. [ 6.102121] audio
  552. [ 6.107034] audio4
  553. [ 6.112001] audio3
  554. [ 6.116873] audio2
  555. [ 6.121647] audio1
  556. [ 6.126390] audio0
  557. [ 6.131163] hdmi_audio
  558. [ 6.136178] entropy
  559. [ 6.140911] dsi2-fixed
  560. [ 6.145875] dsi1-fixed
  561. [ 6.150821] mipi-cal-fixed
  562. [ 6.156093] nor
  563. [ 6.160388] trace
  564. [ 6.164828] sdmmc3_ddr
  565. [ 6.169675] sdmmc1_ddr
  566. [ 6.174528] cclk_lp
  567. [ 6.179091] pll_x_out0
  568. [ 6.183886] pll_u_12M
  569. [ 6.188573] pll_m_out1
  570. [ 6.193440] tegra_dvfs: vdd_cpu connected to regulator
  571. [ 6.200811] tegra_dvfs: vdd_core connected to regulator
  572. [ 6.208257] tegra_dvfs: vdd_gpu connected to regulator
  573. [ 6.216933] Tegra CPU DFLL is initialized with use_dfll = 1
  574. [ 6.224695] CPU rate: 696 MHz
  575. [ 6.231872] tegra-ehci tegra-ehci.0: Tegra EHCI Host Controller
  576. [ 6.239434] tegra-ehci tegra-ehci.0: new USB bus registered, assigned bus number 1
  577. [ 6.248716] tegra-ehci tegra-ehci.0: irq 52, io mem 0x7d000000
  578. [ 6.265506] tegra-ehci tegra-ehci.0: USB 2.0 started, EHCI 1.10
  579. [ 6.273123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  580. [ 6.281532] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  581. [ 6.290370] usb usb1: Product: Tegra EHCI Host Controller
  582. [ 6.297394] usb usb1: Manufacturer: Linux 3.10.40-2.7.4+ge963625 ehci_hcd
  583. [ 6.305837] usb usb1: SerialNumber: tegra-ehci.0
  584. [ 6.312724] hub 1-0:1.0: USB hub found
  585. [ 6.318167] hub 1-0:1.0: 1 port detected
  586. [ 6.324174] cpu_cold cooling device is registered
  587. [ 6.330637] cpu_hot cooling device is registered
  588. [ 6.398680] tegra dvfs: tegra sysfs cap interface is initialized
  589. [ 6.406457] tegra dvfs: tegra sysfs gpu & emc interface is initialized
  590. [ 6.415168] tegra_actmon.emc: Completed initialization (0)
  591. [ 6.422559] tegra_actmon.avp: Completed initialization (0)
  592. [ 6.429929] tegra_mon.cpu_emc: Completed initialization (0)
  593. [ 6.439963] VCC_USBH(2A|2C|2D|3|4): incomplete constraints, leaving on
  594. [ 6.448211] +V1.05_AVDD_HDMI_PLL: incomplete constraints, leaving on
  595. [ 6.456341] +V1.8_VPP_FUSE: incomplete constraints, leaving on
  596. [ 6.463960] as3722-ldo7: incomplete constraints, leaving on
  597. [ 6.471312] VDDIO_SDMMC3: incomplete constraints, leaving on
  598. [ 6.478712] as3722-ldo5: incomplete constraints, leaving on
  599. [ 6.486025] VDDIO_SDMMC1: incomplete constraints, leaving on
  600. [ 6.493426] as3722-sd3: incomplete constraints, leaving on
  601. [ 6.500651] +V3.3_MXM: incomplete constraints, leaving on
  602. [ 6.507789] regulator-dummy: incomplete constraints, leaving on
  603. [ 6.516155] file system registered
  604. [ 6.522190] android_usb gadget: Mass Storage Function, version: 2009/09/11
  605. [ 6.530902] android_usb gadget: Number of LUNs=1
  606. [ 6.537344] lun0: LUN: removable file: (no medium)
  607. [ 6.544389] android_maxim14675_set_voltage: max_voltage (vbus) = 5000
  608. [ 6.552647] android_usb gadget: android_usb ready
  609. [ 6.559148] tegra-udc: bind to driver android_usb
  610. [ 6.565882] gpio wake14 for gpio=235
  611. [ 6.571327] gpio-keys gpio-keys.3: Failed to request GPIO 117, error -16
  612. [ 6.579882] gpio-keys: probe of gpio-keys.3 failed with error -16
  613. [ 6.588279] as3722-rtc as3722-rtc.1: setting system clock to 2000-01-01 00:00:32 UTC (946684832)
  614. [ 6.599510] ALSA device list:
  615. [ 6.604106] #0: Toradex Apalis TK1 SGTL5000
  616. [ 6.610065] #1: HDA NVIDIA Tegra at 0x70038000 irq 113
  617. [ 6.622510] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  618. [ 6.632439] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  619. [ 6.644273] devtmpfs: mounted
  620. [ 6.649390] Freeing unused kernel memory: 460K (c09f3000 - c0a66000)
  621. [ 6.731145] systemd[1]: System time before build time, advancing clock.
  622. [ 6.749128] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL -XZ +LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
  623. [ 6.769737] systemd[1]: Detected architecture arm.
  624.  
  625. Welcome to The Ångström Distribution v2016.12!
  626.  
  627. [ 6.787436] systemd[1]: Set hostname to <apalis-tk1>.
  628. [ 6.949627] systemd[1]: Configuration file /lib/systemd/system/nvfb.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  629. [ 6.968731] systemd[1]: Configuration file /lib/systemd/system/nv.service is marked executable. Please remove executable permission bits. Proceeding anyway.
  630. [ 7.003855] systemd[1]: Listening on udev Control Socket.
  631. [ OK ] Listening on udev Control Socket.
  632. [ 7.017718] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  633. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  634. [ 7.036938] systemd[1]: Created slice System Slice.
  635. [ OK ] Created slice System Slice.
  636. [ 7.049778] systemd[1]: Created slice system-getty.slice.
  637. [ OK ] Created slice system-getty.slice.
  638. [ 7.064613] systemd[1]: Listening on udev Kernel Socket.
  639. [ OK ] Listening on udev Kernel Socket.
  640. [ 7.078674] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  641. [ OK ] Started Forward Password Requests to Wall Directory Watch.
  642. [ 7.097522] systemd[1]: Reached target Paths.
  643. [ OK ] Reached target Paths.
  644. [ 7.109798] systemd[1]: Created slice system-serial\x2dgetty.slice.
  645. [ OK ] Created slice system-serial\x2dgetty.slice.
  646. [ 7.125730] systemd[1]: Listening on Network Service Netlink Socket.
  647. [ OK ] Listening on Network Service Netlink Socket.
  648. [ 7.141712] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  649. [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
  650. [ 7.158528] systemd[1]: Reached target Remote File Systems.
  651. [ OK ] Reached target Remote File Systems.
  652. [ 7.173647] systemd[1]: Listening on Journal Socket (/dev/log).
  653. [ OK ] Listening on Journal Socket (/dev/log).
  654. [ 7.189575] systemd[1]: Listening on Syslog Socket.
  655. [ OK ] Listening on Syslog Socket.
  656. [ 7.202526] systemd[1]: Reached target Swap.
  657. [ OK ] Reached target Swap.
  658. [ 7.214814] systemd[1]: Listening on Journal Socket.
  659. [ OK ] Listening on Journal Socket.
  660. [ 7.231319] systemd[1]: Mounting Debug File System...
  661. Mounting Debug File System...
  662. [ 7.248134] systemd[1]: Starting Apply Kernel Variables...
  663. Starting Apply Kernel Variables...
  664. [ 7.264130] systemd[1]: Mounting FUSE Control File System...
  665. Mounting FUSE Control File System...
  666. [ 7.279897] systemd[1]: Starting File System Check on Root Device...
  667. Starting File System Check on Root Device...
  668. [ 7.297946] systemd[1]: Starting Setup Virtual Console...
  669. Starting Setup Virtual Console...
  670. [ 7.311782] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  671. Starting Create list of required st... nodes for the current kernel...
  672. [ 7.328701] systemd[1]: Starting Journal Service...
  673. Starting Journal Service...
  674. [ 7.343886] systemd[1]: Mounting Temporary Directory...
  675. Mounting Temporary Directory...
  676. [ 7.355918] systemd[1]: Mounting Configuration File System...
  677. Mounting Configuration File Syst[ 7.366716] systemd[1]: Created slice User and Session Slice.
  678. em...
  679. [ OK ] Created slice Us[ 7.378870] systemd[1]: Reached target Slices.
  680. er and Session Slice.
  681. [ OK ] Reached target Slices.
  682. [ 7.394421] systemd[1]: Mounted FUSE Control File System.
  683. [ OK ] Mounted FUSE Con[ 7.404408] systemd[1]: Mounted Configuration File System.
  684. trol File System.
  685. [ OK 7.416277] systemd[1]: Mounted Debug File System.
  686. m] Mounted Configuration File System.
  687. [ 7.427386] systemd[1]: Mounted Temporary Directory.
  688. [ OK ] Mounted Debug File System.
  689. [[ 7.440166] systemd[1]: Started Apply Kernel Variables.
  690. OK ] Mounted Temporary Directory.
  691. [ OK [ 7.453616] systemd[1]: Started Setup Virtual Console.
  692. ] Started Apply Kernel Variables.
  693. [ [ 7.465722] systemd[1]: Started Create list of required static device nodes for the current kernel.
  694. OK ] Started Setup Virtual Console.
  695. [ OK ] Started Create list of required sta...ce nodes for the current kernel.
  696. [ 7.503018] systemd[1]: Started File System Check on Root Device.
  697. [ OK ] Started File System Check on Root Device.
  698. [ 7.521673] systemd[1]: Starting Remount Root and Kernel File Systems...
  699. Starting Remount Root and Kernel File Systems...
  700. [ 7.550911] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  701. [ 7.562616] systemd[1]: Started Remount Root and Kernel File Systems.
  702. [ OK ] Started Remount Root and Kernel File Systems.
  703. [ 7.585558] systemd[1]: Starting udev Coldplug all Devices...
  704. Starting udev Coldplug all Devices...
  705. [ 7.601925] systemd[1]: Starting Create Static Device Nodes in /dev...
  706. Starting Create Static Device Nodes in /dev...
  707. [ 7.630782] systemd[1]: Started Create Static Device Nodes in /dev.
  708. [ OK ] Started Create Static Device Nodes in /dev.
  709. [ 7.647553] systemd[1]: Reached target Local File Systems (Pre).
  710. [ OK ] Reached target Local File Systems (Pre).
  711. [ 7.666539] systemd[1]: Mounting /var/volatile...
  712. Mounting /var/volatile...
  713. [ 7.682715] systemd[1]: Starting udev Kernel Device Manager...
  714. Starting udev Kernel Device Manager...
  715. [ 7.700610] systemd[1]: Mounted /var/volatile.
  716. [ OK ] Mounted /var/volatile.
  717. [ 7.713946] systemd[1]: Started Journal Service.
  718. [ OK ] Started Journal Service.
  719. Starting Flush Journal to Persistent Storage...
  720. Starting Load/Save Random Seed...
  721. [ OK ] Reached target Local File Systems.
  722. [ OK ] Started udev Kernel Device Manager.
  723. [ OK ] Started Load/Save Random Seed.
  724. [ 7.798667] systemd-journald[165]: Received request to flush runtime journal from PID 1
  725. [ OK ] Started Flush Journal to Persistent Storage.
  726. Starting Create Volatile Files and Directories...
  727. [ OK ] Started Create Volatile Files and Directories.
  728. Starting Update UTMP about System Boot/Shutdown...
  729. Starting Network Time Synchronization...
  730. [ OK ] Started Update UTMP about System Boot/Shutdown.
  731. [ OK ] Started Network Time Synchronization.
  732. [ OK ] Reached target System Time Synchronized.
  733. [ OK ] Started udev Coldplug all Devices.
  734. [ OK ] Reached target System Initialization.
  735. Starting Socket activation for snappy daemon.
  736. [ OK ] Listening on RPCbind Server Activation Socket.
  737. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  738. Starting sshd.socket.
  739. [ OK ] Listening on D-Bus System Message Bus Socket.
  740. [ OK ] Started Daily Cleanup of Temporary Directories.
  741. [ OK ] Reached target Timers.
  742. [ OK ] Listening on Socket activation for snappy daemon.
  743. [ OK ] Listening on sshd.socket.
  744. [ OK ] Found device /dev/ttyS0.
  745. [ OK ] Created slice system-systemd\x2dbacklight.slice.
  746. [ 8.337579] gpio wake34 for gpio=82
  747. [ 8.347032] apalis-tk1-k20 spi1.1: Apalis TK1 K20 MFD driver.
  748. [ 8.347032] Firmware version 0.10.
  749. Starting Load/Save Screen Backlight...ss of backlight:pwm-backlight...
  750. [ 8.374661] tegra-xhci tegra-xhci: Firmware File: tegra_xusb_firmware (134656 Bytes)
  751. [ 8.390634] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x80080000 mapped 0xf0323000 (134656 Bytes)
  752. [ OK ] Reached target Sockets.
  753. [ 8.406957] tegra-xhci tegra-xhci: XUSB device id = 0xfa3 (T124+)
  754. [ OK ] Reached target Basic System.
  755. [ OK ] Started D-Bus System Message Bus.
  756. [ 8.472718] tegra-xhci tegra-xhci: Firmware timestamp: 2014-09-16 02:10:07 UTC, Falcon state 0x20
  757. [ 8.489107] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
  758. [ 8.500065] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2
  759. [ 8.513632] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000
  760. [ 8.523893] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  761. [ 8.541477] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  762. [ 8.560606] usb usb2: Product: Nvidia xHCI Host Controller
  763. [ 8.585262] usb usb2: Manufacturer: Linux 3.10.40-2.7.4+ge963625 tegra-xhci
  764. [ 8.631528] usb usb2: SerialNumber: tegra-xhci
  765. Starting Connection service...
  766. [ 8.653620] hub 2-0:1.0: USB hub found
  767. Starting Network Service...
  768. [ OK ] Started Snappy daemon.
  769. [ 8.678456] hub 2-0:1.0: 6 ports detected
  770. [ OK ] Started Kernel Logging Service.
  771. [ OK ] Started Timestamping service.
  772. [ 8.711108] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
  773. [ 8.722682] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 3
  774. [ OK ] Started System Logging Service.
  775. Starting Avahi mDNS/DNS-SD Stack...
  776. [ 8.773849] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
  777. Starting Nvidia binary driver first-boot script...
  778. Starting Save/Restore Sound Card State...
  779. Starting Login Service...
  780. [ 8.832722] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  781. [ OK ] Started Load/Save Screen Backlight ...ness of backlight:pwm-backlight.
  782. [ 8.852868] usb usb3: Product: Nvidia xHCI Host Controller
  783. [ 8.867889] usb usb3: Manufacturer: Linux 3.10.40-2.7.4+ge963625 tegra-xhci
  784. [ 8.889589] usb usb3: SerialNumber: tegra-xhci
  785. [ 8.902785] hub 3-0:1.0: USB hub found
  786. [ 8.912931] hub 3-0:1.0: 2 ports detected
  787. [ 8.931440] Wake58 for irq=81
  788. [ 8.938050] Wake40 for irq=53
  789. [ 8.943559] Wake42 for irq=53
  790. [ 8.950196] Wake41 for irq=129
  791. [ 8.955764] Wake43 for irq=129
  792. [ OK ] Started Save/Restore Sound Card State.
  793. [ OK ] Started Nvidia binary driver first-boot script.
  794. [ 9.039506] apalis-tk1-k20-can apalis-tk1-k20-can.0: probed 0
  795. [ 9.052083] input: apalis-tk1-k20-ts as /devices/platform/spi-tegra114.1/spi_master/spi1/spi1.1/apalis-tk1-k20-ts/input/input0
  796. [ OK ] Started Network Service.
  797. [ 9.081897] apalis-tk1-k20-can apalis-tk1-k20-can.1: probed 1
  798. [ 9.093151] gpiochip_add: registered GPIOs 856 to 1015 on device: generic
  799. [FAILED] Failed to start Avahi mDNS/DNS-SD Stack.
  800. See 'systemctl status avahi-daemon.service' for details.
  801. [ 9.126495] usb 2-3: new full-speed USB device number 2 using tegra-xhci
  802. [ 9.138817] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  803. [ 9.157481] usb 2-3: New USB device found, idVendor=24ae, idProduct=2010
  804. [ 9.172236] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  805. [ 9.188140] usb 2-3: Product: Rapoo 2.4G Wireless Device
  806. [ 9.203075] usb 2-3: Manufacturer: RAPOO
  807. [ OK ] Started Connection service.
  808. [ 9.212492] usb 2-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
  809. [ 9.212542] usb 2-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
  810. [ 9.212575] usb 2-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
  811. [ 9.228926] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/tegra-xhci/usb2/2-3/2-3:1.0/input/input1
  812. [ 9.229447] hid-generic 0003:24AE:2010.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-tegra-xhci-3/input0
  813. [ 9.232527] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/tegra-xhci/usb2/2-3/2-3:1.1/input/input2
  814. [ 9.233189] hid-generic 0003:24AE:2010.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-tegra-xhci-3/input1
  815. [ 9.284066] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/tegra-xhci/usb2/2-3/2-3:1.2/input/input3
  816. [ 9.315762] hid-generic 0003:24AE:2010.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-tegra-xhci-3/input2
  817. [ OK ] Started Login Service.
  818. [ OK ] Reached target Network.
  819. Starting Network Name Resolution...
  820. Starting Permit User Sessions...
  821. Starting Load/Configure the kernel ...er providing the RNDIS gadget...
  822. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  823. Starting Nvidia binary driver init script...
  824. [ 9.414943] android_usb: already disabled
  825. [ 9.436506] rndis_function_bind_config MAC: 00:00:00:00:00:00
  826. [ OK ] Reached target Sound Card.
  827. [ 9.447514] android_usb gadget: using random self ethernet address
  828. [ 9.458423] android_usb gadget: using random host ethernet address
  829. [ 9.460946] rndis0: MAC 12:f7:ac:83:ed:45
  830. [ 9.460951] rndis0: HOST MAC 76:a6:c7:71:4a:46
  831. [ OK ] Started Permit User Sessions.
  832. [ OK ] Started Network Name Resolution.
  833. [ 9.521888] Tegra cpuquiet clusterswitch enabled
  834. Starting Hostname Service...
  835. Starting WPA supplicant...
  836. [ OK ] Started Serial Getty on ttyS0.
  837. [ OK ] Reached target Login Prompts.
  838. [ OK ] Started LXDE Display Manager.
  839. [ OK ] Started Nvidia binary driver init script.
  840. [ OK ] Reached target Multi-User System.
  841. [ OK ] Reached target Graphical Interface.
  842. Starting Update UTMP about System Runlevel Changes...
  843. [ OK ] Started WPA supplicant.
  844. [ OK ] Started Update UTMP about System Runlevel Changes.
  845. [ 9.736813] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
  846. [ 9.755541] 8021q: adding VLAN 0 to HW filter on device enp1s0
  847. [ 9.765121] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  848. [ OK ] Started Load/Configure the kernel driver providing the RNDIS gadget.
  849. [ OK ] Started Hostname Service.
  850.  
  851. .---O---.
  852. | | .-. o o
  853. | | |-----.-----.-----.| | .----..-----.-----.
  854. | | | __ | ---'| '--.| .-'| | |
  855. | | | | | |--- || --'| | | ' | | | |
  856. '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
  857. -' |
  858. '---'
  859.  
  860. The Angstrom Distribution apalis-tk1 ttyS0
  861.  
  862. Angstrom v2016.12 - Kernel
  863.  
  864. Apalis-TK1_LXDE-Image 2.7b4 20171007
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!