Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.32-754.3.5.el6.i686 (mockbuild@x86-01.bsys.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC) ) #1 SMP Tue Aug 14 21:12:17 UTC 2018
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- NSC Geode by NSC
- Cyrix CyrixInstead
- Centaur CentaurHauls
- Transmeta GenuineTMx86
- Transmeta TransmetaCPU
- UMC UMC UMC UMC
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
- BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
- BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
- BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003f5b0000 (usable)
- BIOS-e820: 000000003f5b0000 - 000000003f5c0000 (ACPI data)
- BIOS-e820: 000000003f5c0000 - 000000003f5c3000 (ACPI NVS)
- BIOS-e820: 000000003f5c3000 - 0000000040000000 (reserved)
- BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
- SMBIOS version 2.5 @ 0xF7C60
- SMBIOS 2.5 present.
- DMI: SAMSUNG ELECTRONICS CO., LTD. N100 /N100 , BIOS 03FE.M009.20111007.JIP 10/07/2011
- Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x3f5b0 max_arch_pfn = 0x400000
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- original variable MTRRs
- reg 0, base: 0GB, range: 1GB, type WB
- reg 1, base: 1014MB, range: 2MB, type UC
- reg 2, base: 1016MB, range: 8MB, type UC
- total RAM covered: 1014M
- Found optimal setting for mtrr clean up
- gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
- New variable MTRRs
- reg 0, base: 0GB, range: 1GB, type WB
- reg 1, base: 1014MB, range: 2MB, type UC
- reg 2, base: 1016MB, range: 8MB, type UC
- initial memory mapped : 0 - 01200000
- init_memory_mapping: 0000000000000000-00000000375fe000
- NX (Execute Disable) protection: active
- 0000000000 - 0000200000 page 4k
- 0000200000 - 0037400000 page 2M
- 0037400000 - 00375fe000 page 4k
- kernel direct mapping tables up to 375fe000 @ 10000-19000
- RAMDISK: 36b80000 - 37fef03c
- Allocated new RAMDISK: 00d03000 - 0217203c
- Move RAMDISK from 0000000036b80000 - 0000000037fef03b to 00d03000 - 0217203b
- ACPI: Deleted _OSI(Windows 2012)
- ACPI: Deleted _OSI(Windows 2013)
- ACPI: RSDP 000f7cd0 00024 (v02 PTLTD )
- ACPI: XSDT 3f5b829a 0007C (v01 SECCSD LH43STAR 06040000 LTP 00000000)
- ACPI: FACP 3f5bfde4 000F4 (v03 INTEL 06040000 PTL 00000002)
- ACPI: DSDT 3f5b9e07 05EE9 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
- ACPI: FACS 3f5c2fc0 00040
- ACPI: SLIC 3f5bfed8 00024 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
- ACPI: MCFG 3f5bfefc 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
- ACPI: HPET 3f5bff38 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
- ACPI: APIC 3f5bff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
- ACPI: BOOT 3f5bffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
- ACPI: SSDT 3f5b8ed4 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
- ACPI: SSDT 3f5b8e2e 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050624)
- ACPI: SSDT 3f5b8d88 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050624)
- ACPI: SSDT 3f5b8ce2 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
- ACPI: SSDT 3f5b8316 009CC (v02 PmRef CpuPm 00003000 INTL 20050624)
- ACPI: Local APIC address 0xfee00000
- 127MB HIGHMEM available.
- 885MB LOWMEM available.
- mapped low ram: 0 - 375fe000
- low ram: 0 - 375fe000
- node 0 low ram: 00000000 - 375fe000
- node 0 bootmap 00014000 - 0001aec0
- (9 early reservations) ==> bootmem [0000000000 - 00375fe000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- #3 [0000400000 - 0000cf8110] TEXT DATA BSS ==> [0000400000 - 0000cf8110]
- #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
- #5 [0000cf9000 - 0000d021e3] BRK ==> [0000cf9000 - 0000d021e3]
- #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
- #7 [0000d03000 - 000217203c] NEW RAMDISK ==> [0000d03000 - 000217203c]
- #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
- found SMP MP-table at [c00f7d00] f7d00
- crashkernel=auto resulted in zero bytes of reserved memory.
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- Normal 0x00001000 -> 0x000375fe
- HighMem 0x000375fe -> 0x0003f5b0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000010 -> 0x0000009d
- 0: 0x00000100 -> 0x0003f5b0
- On node 0 totalpages: 259389
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3949 pages, LIFO batch:0
- Normal zone: 1740 pages used for memmap
- Normal zone: 220978 pages, LIFO batch:31
- HighMem zone: 256 pages used for memmap
- HighMem zone: 32434 pages, LIFO batch:7
- Using APIC driver default
- Reserving Intel graphics stolen memory at 0x3f800000-0x3fffffff
- ACPI: PM-Timer IO Port: 0x1008
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
- ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0xffffffff base: 0xfed00000
- SMP: Allowing 2 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
- PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
- PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
- PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
- PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
- PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
- Booting paravirtualized kernel on bare hardware
- NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
- PERCPU: Embedded 18 pages/cpu @c2a00000 s49176 r0 d24552 u1048576
- pcpu-alloc: s49176 r0 d24552 u1048576 alloc=1*2097152
- pcpu-alloc: [0] 0 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257361
- Kernel command line: ro root=UUID=5a28f0cf-9279-4f61-8f9c-9d3541d6b5a2 LANG=ru_RU.UTF-8 rd_NO_LUKS rd_NO_LVM rd_NO_MD KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rhgb quiet SYSFONT=UniCyr_8x16
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Initializing CPU#0
- Initializing HighMem for node 0 (000375fe:0003f5b0)
- Memory: 997712k/1038016k available (4711k kernel code, 39480k reserved, 2660k data, 580k init, 130760k highmem)
- virtual kernel memory layout:
- fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
- pkmap : 0xff600000 - 0xff800000 (2048 kB)
- vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
- .init : 0xc0b34000 - 0xc0bc5000 ( 580 kB)
- .data : 0xc0899d66 - 0xc0b33128 (2660 kB)
- .text : 0xc0400000 - 0xc0899d66 (4711 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- Hierarchical RCU implementation.
- NR_IRQS:2304 nr_irqs:424
- Extended CMOS year: 2000
- Console: colour VGA+ 80x25
- console [tty0] enabled
- allocated 2097152 bytes of page_cgroup
- please try 'cgroup_disable=memory' option if you don't want memory cgroups
- hpet clockevent registered
- Fast TSC calibration using PIT
- Detected 1329.967 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.93 BogoMIPS (lpj=1329967)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- SELinux: Initializing.
- SELinux: Starting in permissive mode
- Mount-cache hash table entries: 512
- Initializing cgroup subsys ns
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- Initializing cgroup subsys perf_event
- Initializing cgroup subsys net_prio
- mce: CPU supports 5 MCE banks
- CPU0: Thermal monitoring handled by SMI
- using mwait in idle threads.
- FEATURE SPEC_CTRL Not Present
- FEATURE IBPB_SUPPORT Not Present
- Spectre V2 : Vulnerable
- ACPI: Core revision 20090903
- Enabling APIC mode: Flat. Using 1 I/O APICs
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Atom(TM) CPU N435 @ 1.33GHz stepping 0a
- Performance Events: PEBS fmt0+, 8-deep LBR, Atom events, Intel PMU driver.
- ... version: 3
- ... bit width: 40
- ... generic registers: 2
- ... value mask: 000000ffffffffff
- ... max period: 000000007fffffff
- ... fixed-purpose events: 3
- ... event mask: 0000000700000003
- Booting Node 0, Processors #1 Ok.
- Initializing CPU#1
- CPU0: Thermal monitoring enabled (TM1)
- Brought up 2 CPUs
- Total of 2 processors activated (5319.86 BogoMIPS).
- sizeof(vma)=100 bytes
- sizeof(page)=32 bytes
- sizeof(inode)=352 bytes
- sizeof(dentry)=132 bytes
- sizeof(ext3inode)=508 bytes
- sizeof(buffer_head)=56 bytes
- sizeof(skbuff)=184 bytes
- sizeof(task_struct)=1360 bytes
- devtmpfs: initialized
- PM: Registering ACPI NVS region at 3f5c0000 (12288 bytes)
- regulator: core version 0.5
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 16
- PCI: MCFG area at e0000000 reserved in E820
- PCI: Using MMCONFIG for extended config space
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: Interpreter enabled
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
- ACPI: No dock devices found.
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70546e0), AE_ALREADY_EXISTS
- ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
- pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
- pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
- pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
- pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
- pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
- pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
- pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
- pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
- PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
- pci_bus 0000:00: root bus resource [mem 0x40000000-0xf7ffffff]
- pci_bus 0000:00: root bus resource [io 0x0d00-0xfdff]
- pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
- pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
- pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
- pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
- pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
- pci 0000:00:1b.0: reg 10: [mem 0xf0300000-0xf0303fff 64bit]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: PME# disabled
- pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.2: PME# disabled
- pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.3: PME# disabled
- pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
- pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
- pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
- pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
- pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
- pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
- pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
- pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
- pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
- pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
- pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf0101fff 64bit]
- pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:05:00.0: PME# disabled
- pci 0000:00:1c.0: PCI bridge to [bus 05-05]
- pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
- pci 0000:00:1c.1: PCI bridge to [bus 07-07]
- pci 0000:09:00.0: reg 10: [io 0x2000-0x20ff]
- pci 0000:09:00.0: reg 18: [mem 0xf050c000-0xf050cfff 64bit pref]
- pci 0000:09:00.0: reg 20: [mem 0xf0508000-0xf050bfff 64bit pref]
- pci 0000:09:00.0: supports D1 D2
- pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:09:00.0: PME# disabled
- pci 0000:00:1c.2: PCI bridge to [bus 09-09]
- pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
- pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
- pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
- pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
- ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70546e0), AE_ALREADY_EXISTS
- pci0000:00: Requesting ACPI _OSC control (0x1d)
- ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70546e0), AE_ALREADY_EXISTS
- Unable to assume _OSC PCIe control. Disabling ASPM
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:00:02.0
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
- PCI: pci_cache_line_size set to 64 bytes
- pci 0000:00:1d.7: can't claim BAR 0 [mem 0xf0504000-0xf05043ff]: address conflict with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
- pci 0000:00:1d.7: can't reserve [mem 0xf0504000-0xf05043ff]
- pci 0000:00:1f.2: can't claim BAR 5 [mem 0xf0504400-0xf05047ff]: address conflict with PCI Bus 0000:09 [mem 0xf0500000-0xf05fffff 64bit pref]
- pci 0000:00:1f.2: can't reserve [mem 0xf0504400-0xf05047ff]
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource hpet
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
- pnp 00:01: [io 0x0010-0x001f]
- pnp 00:01: [io 0x0024-0x0025]
- pnp 00:01: [io 0x0028-0x0029]
- pnp 00:01: [io 0x002c-0x002d]
- pnp 00:01: [io 0x0030-0x0031]
- pnp 00:01: [io 0x0034-0x0035]
- pnp 00:01: [io 0x0038-0x0039]
- pnp 00:01: [io 0x003c-0x003d]
- pnp 00:01: [io 0x0072-0x0077]
- pnp 00:01: [io 0x0080]
- pnp 00:01: [io 0x0090-0x009f]
- pnp 00:01: [io 0x00a4-0x00a5]
- pnp 00:01: [io 0x00a8-0x00a9]
- pnp 00:01: [io 0x00ac-0x00ad]
- pnp 00:01: [io 0x00b0-0x00b5]
- pnp 00:01: [io 0x00b8-0x00b9]
- pnp 00:01: [io 0x00bc-0x00bd]
- pnp 00:01: [io 0x0800-0x080f]
- pnp 00:01: [io 0x1000-0x107f]
- pnp 00:01: [io 0x1180-0x11bf]
- pnp 00:01: [io 0x002e-0x002f]
- pnp 00:01: [io 0x04d0-0x04d1]
- pnp 00:01: [io 0xfe00]
- pnp 00:01: [io 0x164e-0x174c]
- pnp 00:01: [mem 0xe0000000-0xefffffff]
- pnp 00:01: [mem 0xfed14000-0xfed17fff]
- pnp 00:01: [mem 0xf8000000-0xfbffffff]
- pnp 00:01: [mem 0xfef00000-0xfeffffff]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:02: [io 0x0000-0x000f]
- pnp 00:02: [io 0x0081-0x008f]
- pnp 00:02: [io 0x00c0-0x00df]
- pnp 00:02: [dma 4]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:03: [io 0x00f0-0x00fe]
- pnp 00:03: [irq 13]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:04: [io 0x0070-0x0071]
- pnp 00:04: [irq 8]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:05: [io 0x0061]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:06: [io 0x0060]
- pnp 00:06: [io 0x0064]
- pnp 00:06: [irq 1]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
- pnp 00:07: [irq 12]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active)
- pnp 00:08: [mem 0xff800000-0xffffffff]
- pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
- pnp: PnP ACPI: found 9 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:01: [io 0x0800-0x080f] has been reserved
- system 00:01: [io 0x1000-0x107f] has been reserved
- system 00:01: [io 0x1180-0x11bf] has been reserved
- system 00:01: [io 0x04d0-0x04d1] has been reserved
- system 00:01: [io 0xfe00] has been reserved
- system 00:01: [io 0x164e-0x174c] has been reserved
- system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
- system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
- system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
- pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
- pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 200000
- pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 07-07] add_size 1000
- pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07-07] add_size 200000
- pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 07-07] add_size 200000
- pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 09-09] add_size 400000
- pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 0b-0b] add_size 1000
- pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b-0b] add_size 200000
- pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff] to [bus 0b-0b] add_size 200000
- pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
- pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
- pci 0000:00:1c.3: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
- pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
- pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- pci 0000:00:1c.3: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
- pci 0000:00:1c.0: BAR 15: assigned [mem 0x40000000-0x401fffff 64bit pref]
- pci 0000:00:1c.1: BAR 14: assigned [mem 0x40200000-0x403fffff]
- pci 0000:00:1c.1: BAR 15: assigned [mem 0x40400000-0x405fffff 64bit pref]
- pci 0000:00:1c.2: BAR 14: assigned [mem 0x40600000-0x409fffff]
- pci 0000:00:1c.3: BAR 14: assigned [mem 0x40a00000-0x40bfffff]
- pci 0000:00:1c.3: BAR 15: assigned [mem 0x40c00000-0x40dfffff 64bit pref]
- pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
- pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
- pci 0000:00:1c.3: BAR 13: assigned [io 0x5000-0x5fff]
- pci 0000:00:1d.7: BAR 0: assigned [mem 0x40e00000-0x40e003ff]
- pci 0000:00:1f.2: BAR 5: assigned [mem 0x40e00400-0x40e007ff]
- pci 0000:00:1c.0: PCI bridge to [bus 05-05]
- pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
- pci 0000:00:1c.0: bridge window [mem 0xf0100000-0xf01fffff]
- pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff 64bit pref]
- pci 0000:00:1c.1: PCI bridge to [bus 07-07]
- pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
- pci 0000:00:1c.1: bridge window [mem 0x40200000-0x403fffff]
- pci 0000:00:1c.1: bridge window [mem 0x40400000-0x405fffff 64bit pref]
- pci 0000:00:1c.2: PCI bridge to [bus 09-09]
- pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
- pci 0000:00:1c.2: bridge window [mem 0x40600000-0x409fffff]
- pci 0000:00:1c.2: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
- pci 0000:00:1c.3: PCI bridge to [bus 0b-0b]
- pci 0000:00:1c.3: bridge window [io 0x5000-0x5fff]
- pci 0000:00:1c.3: bridge window [mem 0x40a00000-0x40bfffff]
- pci 0000:00:1c.3: bridge window [mem 0x40c00000-0x40dfffff 64bit pref]
- pci 0000:00:1e.0: PCI bridge to [bus 11-11]
- alloc irq_desc for 16 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.1: enabling device (0000 -> 0003)
- alloc irq_desc for 17 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 18 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:1c.2: setting latency timer to 64
- pci 0000:00:1c.3: enabling device (0000 -> 0003)
- alloc irq_desc for 19 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:1c.3: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
- pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
- pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
- pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
- pci_bus 0000:05: resource 1 [mem 0xf0100000-0xf01fffff]
- pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
- pci_bus 0000:07: resource 0 [io 0x4000-0x4fff]
- pci_bus 0000:07: resource 1 [mem 0x40200000-0x403fffff]
- pci_bus 0000:07: resource 2 [mem 0x40400000-0x405fffff 64bit pref]
- pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
- pci_bus 0000:09: resource 1 [mem 0x40600000-0x409fffff]
- pci_bus 0000:09: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
- pci_bus 0000:0b: resource 0 [io 0x5000-0x5fff]
- pci_bus 0000:0b: resource 1 [mem 0x40a00000-0x40bfffff]
- pci_bus 0000:0b: resource 2 [mem 0x40c00000-0x40dfffff 64bit pref]
- pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
- pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
- pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
- pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
- pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
- pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- pci 0000:00:02.0: Boot video device
- alloc irq_desc for 23 on node -1
- alloc kstat_irqs on node -1
- pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- pci 0000:00:1d.0: PCI INT A disabled
- pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:1d.1: PCI INT B disabled
- pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:1d.2: PCI INT C disabled
- pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1d.3: PCI INT D disabled
- pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- pci 0000:00:1d.7: PCI INT A disabled
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 20924k freed
- Simple Boot Flag at 0x36 set to 0x1
- apm: BIOS not found.
- futex hash table entries: 512 (order: 2, 16384 bytes)
- audit: initializing netlink socket (disabled)
- type=2000 audit(1535731040.588:1): initialized
- highmem bounce pool size: 64 pages
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- msgmni has been set to 1734
- SELinux: Registering netfilter hooks
- ksign: Installing public key data
- Loading keyring
- - Added public key F85E3B1E77D974EA
- - User ID: CentOS (Kernel Module GPG key)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pcieport 0000:00:1c.0: setting latency timer to 64
- alloc irq_desc for 24 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
- pcieport 0000:00:1c.1: setting latency timer to 64
- alloc irq_desc for 25 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
- pcieport 0000:00:1c.2: setting latency timer to 64
- alloc irq_desc for 26 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
- pcieport 0000:00:1c.3: setting latency timer to 64
- alloc irq_desc for 27 on node -1
- alloc kstat_irqs on node -1
- pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- Marking TSC unstable due to TSC halts in idle states deeper than C2
- ACPI: AC Adapter [ADP1] (on-line)
- input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
- ACPI: Lid Switch [LID0]
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- ACPI: Power Button [PWRB]
- input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- ACPI: Sleep Button [SLPB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
- ACPI: Power Button [PWRF]
- ACPI: acpi_idle yielding to intel_idleACPI: SSDT 3f5b99ca 001C1 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
- ACPI: SSDT 3f5b9133 00708 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
- ACPI: SSDT 3f5b9b8b 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
- ACPI: SSDT 3f5b983b 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
- [Firmware Bug]: No valid trip found
- thermal LNXTHERM:01: registered as thermal_zone0
- ACPI: Thermal Zone [TZ00] (55 C)
- GHES: HEST is not enabled!
- isapnp: Scanning for PnP cards...
- ACPI: Battery Slot [BAT1] (battery present)
- isapnp: No Plug & Play device found
- Non-volatile memory driver v1.3
- Linux agpgart interface v0.103
- agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
- agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
- agpgart-intel 0000:00:00.0: detected 8192K stolen memory
- agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
- crash memory driver: version 1.1
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- brd: module loaded
- loop: module loaded
- input: Macintosh mouse button emulation as /devices/virtual/input/input4
- Fixed MDIO Bus: probed
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1d.7: using broken periodic workaround
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
- ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40e00000
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.32-754.3.5.el6.i686 ehci_hcd
- usb usb1: SerialNumber: 0000:00:1d.7
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.32-754.3.5.el6.i686 uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.32-754.3.5.el6.i686 uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.1
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.32-754.3.5.el6.i686 uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.2
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1d.3: setting latency timer to 64
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: UHCI Host Controller
- usb usb5: Manufacturer: Linux 2.6.32-754.3.5.el6.i686 uhci_hcd
- usb usb5: SerialNumber: 0000:00:1d.3
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- cpuidle: using governor ladder
- cpuidle: using governor menu
- EFI Variables Facility v0.08 2004-May-17
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- GRE over IPv4 demultiplexor driver
- TCP cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- Using IPI No-Shortcut mode
- registered taskstats version 1
- rtc_cmos 00:04: setting system clock to 2018-08-31 15:57:21 UTC (1535731041)
- Initalizing network drop monitor service
- SMP alternatives: switching to UP code
- Freeing unused kernel memory: 580k freed
- Write protecting the kernel text: 4712k
- Write protecting the kernel read-only data: 2020k
- input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
- dracut: dracut-004-411.el6
- dracut: rd_NO_LUKS: removing cryptoluks activation
- dracut: rd_NO_LVM: removing LVM activation
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
- usb 1-8: new high speed USB device number 2 using ehci_hcd
- usb 1-8: New USB device found, idVendor=2232, idProduct=1006
- usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-8: Product: WebCam SCB-0355N
- usb 1-8: Manufacturer: Image Processor
- usb 1-8: configuration #1 chosen from 1 choice
- Switching to clocksource tsc
- udev: starting version 147
- assuming hardware version 2 (with firmware version 0x040216)
- elantech.c: Synaptics capabilities query result 0x09, 0x14, 0x0b.
- input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6
- Switching to clocksource hpet
- [drm] Initialized drm 1.1.0 20060810
- i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [drm] Memory usable by graphics device = 512M
- i915 0000:00:02.0: setting latency timer to 64
- alloc irq_desc for 28 on node -1
- alloc kstat_irqs on node -1
- i915 0000:00:02.0: irq 28 for MSI/MSI-X
- [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [drm] Driver supports precise vblank timestamp query.
- vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
- [drm] initialized overlay support
- ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
- ACPI Warning: _BQC returned an invalid level (20090903/video-658)
- acpi device:03: registered as cooling_device2
- input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
- [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
- fbcon: inteldrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 128x37
- i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
- dracut: Starting plymouth daemon
- dracut: rd_NO_DM: removing DM RAID activation
- dracut: rd_NO_MD: removing MD RAID activation
- ahci 0000:00:1f.2: version 3.0
- ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- alloc irq_desc for 29 on node -1
- alloc kstat_irqs on node -1
- ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
- ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
- ahci 0000:00:1f.2: setting latency timer to 64
- scsi0 : ahci
- scsi1 : ahci
- scsi2 : ahci
- scsi3 : ahci
- ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 29
- ata2: SATA max UDMA/133 abar m1024@0x40e00400 port 0x40e00580 irq 29
- ata3: SATA max UDMA/133 abar m1024@0x40e00400 port 0x40e00600 irq 29
- ata4: SATA max UDMA/133 abar m1024@0x40e00400 port 0x40e00680 irq 29
- ata2: SATA link down (SStatus 0 SControl 300)
- ata3: SATA link down (SStatus 0 SControl 300)
- ata4: SATA link down (SStatus 0 SControl 300)
- ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata1.00: ATA-8: SAMSUNG HN-M320MBB, 2AR10001, max UDMA/133
- ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: Direct-Access ATA SAMSUNG HN-M320M 0001 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
- sd 0:0:0:0: [sda] 4096-byte physical blocks
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3 sda4
- sd 0:0:0:0: [sda] Attached SCSI disk
- EXT3-fs (sda1): recovery required on readonly filesystem
- EXT3-fs (sda1): write access will be enabled during recovery
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda1): orphan cleanup on readonly fs
- ext3_orphan_cleanup: deleting unreferenced inode 114403
- ext3_orphan_cleanup: deleting unreferenced inode 114337
- ext3_orphan_cleanup: deleting unreferenced inode 114323
- ext3_orphan_cleanup: deleting unreferenced inode 114306
- EXT3-fs (sda1): 4 orphan inodes deleted
- EXT3-fs (sda1): recovery complete
- EXT3-fs (sda1): mounted filesystem with ordered data mode
- dracut: Mounted root filesystem /dev/sda1
- dracut: Loading SELinux policy
- type=1404 audit(1535731054.499:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- SELinux: 2048 avtab hash slots, 309333 rules.
- SELinux: 2048 avtab hash slots, 309333 rules.
- SELinux: 9 users, 12 roles, 4215 types, 237 bools, 1 sens, 1024 cats
- SELinux: 81 classes, 309333 rules
- SELinux: Completing initialization.
- SELinux: Setting up existing superblocks.
- SELinux: initialized (dev sda1, type ext3), uses xattr
- SELinux: initialized (dev drm, type drm), not configured for labeling
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
- SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
- SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
- SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
- SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
- SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
- SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- SELinux: initialized (dev proc, type proc), uses genfs_contexts
- SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
- SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- type=1403 audit(1535731057.344:3): policy loaded auid=4294967295 ses=4294967295
- dracut:
- dracut: Switching root
- udev: starting version 147
- alloc irq_desc for 22 on node -1
- alloc kstat_irqs on node -1
- snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- alloc irq_desc for 30 on node -1
- alloc kstat_irqs on node -1
- snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
- snd_hda_intel 0000:00:1b.0: setting latency timer to 64
- sound hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
- sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
- sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
- sound hdaudioC0D0: mono: mono_out=0x0
- sound hdaudioC0D0: inputs:
- sound hdaudioC0D0: Mic=0x18
- input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
- input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
- Intel(R) Wireless WiFi driver for Linux
- Copyright(c) 2003- 2015 Intel Corporation
- iwlwifi 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- iwlwifi 0000:05:00.0: setting latency timer to 64
- alloc irq_desc for 31 on node -1
- alloc kstat_irqs on node -1
- iwlwifi 0000:05:00.0: irq 31 for MSI/MSI-X
- iwlwifi 0000:05:00.0: firmware: requesting iwlwifi-100-5.ucode
- iwlwifi 0000:05:00.0: loaded firmware version 39.31.5.1 build 32895 op_mode iwldvm
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- r8169 0000:09:00.0: setting latency timer to 64
- alloc irq_desc for 32 on node -1
- alloc kstat_irqs on node -1
- r8169 0000:09:00.0: irq 32 for MSI/MSI-X
- r8169 0000:09:00.0: eth0: RTL8105e at 0xf9580000, e8:03:9a:18:48:6b, XID 00a00000 IRQ 32
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUG disabled
- iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
- iwlwifi 0000:05:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
- iwlwifi 0000:05:00.0: Detected Intel(R) Centrino(R) Wireless-N 100 BGN, REV=0x6C
- iwlwifi 0000:05:00.0: L1 Enabled - LTR Disabled
- Registered led device: phy0-led
- ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
- i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- i801_smbus 0000:00:1f.3: SMBus using polling
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- Linux video capture interface: v2.00
- uvcvideo: Found UVC 1.00 device WebCam SCB-0355N (2232:1006)
- input: WebCam SCB-0355N as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input10
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (v1.0.0)
- iTCO_vendor_support: vendor-support=0
- iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
- iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
- iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- cfg80211: World regulatory domain updated:
- cfg80211: DFS Master region: unset
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
- cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
- cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
- cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
- cfg80211: Regulatory domain changed to country: RU
- cfg80211: DFS Master region: ETSI
- cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
- cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
- cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
- cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
- cfg80211: (5650000 KHz - 5730000 KHz @ 80000 KHz), (N/A, 3000 mBm), (0 s)
- cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
- cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
- microcode: CPU0 sig=0x106ca, pf=0x4, revision=0x105
- platform microcode: firmware: requesting intel-ucode/06-1c-0a
- Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- microcode: CPU0 updated to revision 0x107, date = 2009-08-25
- EXT3-fs (sda1): using internal journal
- EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts:
- SELinux: initialized (dev sda4, type ext4), uses xattr
- Adding 2046972k swap on /dev/sda2. Priority:-1 extents:1 across:2046972k
- SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- nf_conntrack version 0.5.0 (15931 buckets, 63724 max)
- ip_tables: (C) 2000-2006 Netfilter Core Team
- type=1305 audit(1535731102.368:4): audit_pid=1630 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
- iwlwifi 0000:05:00.0: L1 Enabled - LTR Disabled
- iwlwifi 0000:05:00.0: L1 Enabled - LTR Disabled
- iwlwifi 0000:05:00.0: Radio type=0x0-0x0-0x3
- iwlwifi 0000:05:00.0: L1 Enabled - LTR Disabled
- iwlwifi 0000:05:00.0: L1 Enabled - LTR Disabled
- iwlwifi 0000:05:00.0: Radio type=0x0-0x0-0x3
- ADDRCONF(NETDEV_UP): wlan0: link is not ready
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- r8169 0000:09:00.0: firmware: requesting rtl_nic/rtl8105e-1.fw
- r8169 0000:09:00.0: eth0: link down
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement