API tools faq
paste
Advertisement
Gazzeh

Jewdy's SUV

Gazzeh
Nov 13th, 2015
123
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.16 KB | None | 0 0
raw download clone embed print report
  1. 2015-11-13 21:53:02 ★ Richard Hawkins would walk over to the wall of the garage as he then bends down and picks up a toolbox with
  2. 2015-11-13 21:53:09 ★ his right hand. ((Richard Hawkins))
  3. 2015-11-13 21:53:34 ★ Richard Hawkins would then walk back to the car as he then places the toolbox down next to the lift.
  4. 2015-11-13 21:54:03 ★ Richard Hawkins would then the driverside door of the car as he then reaches for the lever to open the
  5. 2015-11-13 21:54:08 ★ hood of the SUV ((Richard Hawkins))
  6. 2015-11-13 21:55:10 ★ with his right hand. ((Richard Hawkins))
  7. 2015-11-13 21:55:37 ★ Richard Hawkins would the n walk to the front of the SUV as he then slides his fingers under the hood and
  8. 2015-11-13 21:55:58 ★ flicks a lever so he coupl open the hood of the SUV ((Richard Hawkins))
  9. 2015-11-13 21:56:32 ★ Richard Hawkins would then walk to the toolstation as he then picks up 4 plastic pads with his left and righ
  10. 2015-11-13 21:56:58 ★ -t hand as he then walks back to the SUV and places the pads under the each end ((Richard Hawkins))
  11. 2015-11-13 21:57:03 ★ of the skirt. ((Richard Hawkins))
  12. 2015-11-13 21:57:37 ★ Richard Hawkins would then walk over to the lift control panel as he then uses his right hand to push a
  13. 2015-11-13 21:57:48 ★ button and move the middle part of the lift up. ((Richard Hawkins))
  14. 2015-11-13 21:58:10 ★ he would hold the button till all four wheels are off the ground. ((Richard Hawkins))
  15. 2015-11-13 21:58:47 ★ Richard Hawkins would then move to the front wheel as he then bends down to his toolbox and takes out a
  16. 2015-11-13 21:59:15 ★ breaker bar aswell as 19mm socket. ((Richard Hawkins))
  17. 2015-11-13 22:00:01 ★ Richard Hawkins would connect the two as he then uses the breaker bar with 19mm socket to loosen up
  18. 2015-11-13 22:00:10 ★ the bolts holding the wheel in position. ((Richard Hawkins))
  19. 2015-11-13 22:00:36 ★ Richard Hawkins would then undo the bolts by hand as he then uses both of his hands to lift the wheel away
  20. 2015-11-13 22:00:47 ★ from the wheel hub and places it down onto the ground. ((Richard Hawkins))
  21. 2015-11-13 22:01:07 ★ Richard Hawkins would then roll the wheel to the side of the garage as he then leans it against the wall.
  22. 2015-11-13 22:01:36 ★ Richard Hawkins would then walk back to the car as he then inspects the suspension system.
  23. 2015-11-13 22:02:57 ★ Richard Hawkins would then bend down to the toolbox as he then takes out a socket wrench with 17mm
  24. 2015-11-13 22:03:09 ★ socket and connects the two. ((Richard Hawkins))
  25. 2015-11-13 22:03:22 ★ with his both hands. ((Richard Hawkins))
  26. 2015-11-13 22:04:02 ★ Richard Hawkins would then use the socket wrench with 17mm socket to loosen up the bolts connecting
  27. 2015-11-13 22:04:40 ★ the Shock absorber to the Front steering knuckle. ((Richard Hawkins))
  28. 2015-11-13 22:05:13 ★ Richard Hawkins would then place the bolts and nuts into his pocket as he then bends down to his toolbox and
  29. 2015-11-13 22:05:34 ★ takes out a hammer and a big philips headed screwdriver. ((Richard Hawkins))
  30. 2015-11-13 22:05:58 ★ Richard Hawkins would then use the screwdriver and the hammer to tap out the bolt from the shock absorber.
  31. 2015-11-13 22:06:40 ★ after doing so he would place the hammer and the screwedriver back into the toolbox and ((Richard Hawkins))
  32. 2015-11-13 22:06:56 ★ continues removing the shock absorber. ((Richard Hawkins))
  33. 2015-11-13 22:07:25 ★ Richard Hawkins would then stand up as he stpes onto the lift to reach under the hood.
  34. 2015-11-13 22:08:07 ★ Richard Hawkins would then again crouch back down as he then uses the socket wrench with 17mm socket
  35. 2015-11-13 22:08:49 ★ to loosen up and remove the nuts of the Sway bars front end link. ((Richard Hawkins))
  36. 2015-11-13 22:09:10 ★ Richard Hawkins would then remove the swaybar as he then stands back up and steps onto the lift again.
  37. 2015-11-13 22:09:56 ★ Richard Hawkins would then use the 17mm socket wrench to remove 4 nuts securing a coilover against the
  38. 2015-11-13 22:09:59 ★ chassis. ((Richard Hawkins))
  39. 2015-11-13 22:10:42 ★ Richard Hawkins would then step back down as he then uses his body weight to push down the steering knuckle
  40. 2015-11-13 22:10:49 ★ so he could remove the coilover. ((Richard Hawkins))
  41. 2015-11-13 22:11:21 ★ Richard Hawkins would then take the coilover away form the wheel hub, as he then makes his way to the
  42. 2015-11-13 22:11:27 ★ toolstation with it. ((Richard Hawkins))
  43. 2015-11-13 22:12:10 ★ Richard Hawkins would then open the cardboard box near the toolstation as he then takes out a new coilover.
  44. 2015-11-13 22:13:02 ★ the shock absorber would be stock Frod F250 superduty shock absorber. ((Richard Hawkins))
  45. 2015-11-13 22:13:47 ★ Richard Hawkins would then take the new shock absorber to the Ford as he then slides it into holes that are
  46. 2015-11-13 22:13:52 ★ in the chassis. ((Richard Hawkins))
  47. 2015-11-13 22:14:21 ★ Richard Hawkins would then rest the coiloverr against the steering rack as he then grabs his socket wrench
  48. 2015-11-13 22:14:34 ★ which has 17mm socket connected to it. ((Richard Hawkins))
  49. 2015-11-13 22:15:18 ★ Richard Hawkins would then stand back up as he then screwes on the 4 nuts holding the shock absorber in
  50. 2015-11-13 22:15:32 ★ place as he then tightens them with the socket wrench ((Richard Hawkins))
  51. 2015-11-13 22:16:41 ★ Richard Hawkins would then step off the lift again so he could work the wheel hub.
  52. 2015-11-13 22:17:14 ★ Richard Hawkins would then press the steering knuckle down again as he then slides the shock absorber in
  53. 2015-11-13 22:17:19 ★ place. ((Richard Hawkins))
  54. 2015-11-13 22:17:41 ★ Richard Hawkins would then reach into his pockets as he then takes out two long bolts with two nuts and
  55. 2015-11-13 22:18:07 ★ slides the bolts throught the steering knuckle and through the shock absorber. ((Richard Hawkins))
  56. 2015-11-13 22:18:45 ★ Richard Hawkins would then tighten the two bolts as he then reaches out for the new sway bar end.
  57. 2015-11-13 22:19:08 ★ Richard Hawkins would then slide the sway bar end into the holes as he then takes couple of nuts from his
  58. 2015-11-13 22:19:18 ★ pocket and screwes them on. ((Richard Hawkins))
  59. 2015-11-13 22:19:43 ★ Richard Hawkins would then use the socket wrench with the 17mm socket to tightend the nuts as he then walks
  60. 2015-11-13 22:19:48 ★ to the back of the car. ((Richard Hawkins))
  61. 2015-11-13 22:20:32 ★ Richard Hawkins would open the back hatch of the SUV as he then takes out front left Stock tyre for the SUV
  62. 2015-11-13 22:20:51 ★ Richard Hawkins would then use both of his hands to lift the tyre out of the back and then places it onto
  63. 2015-11-13 22:21:09 ★ the ground and rolls it to the front of the suv. ((Richard Hawkins))
  64. 2015-11-13 22:22:29 ★ Richard Hawkins would then lift the wheel to the wheel hub as he then digs for a couple of nuts from his
  65. 2015-11-13 22:22:46 ★ pocket and screwes them on so the wheel would be secure. ((Richard Hawkins))
  66. 2015-11-13 22:23:06 ★ Richard Hawkins would then screw on the other 3 nuts as he then bends down to his toolbox
  67. 2015-11-13 22:23:29 ★ and takes out a torque wrench and connects the 19mm socket to it. ((Richard Hawkins))
  68. 2015-11-13 22:24:31 ★ Richard Hawkins would then set the torque bar to 150n:m as he then uses it to tighten all 5 nuts of the whee
  69. 2015-11-13 22:25:15 ★ Richard Hawkins would repeat the same actions on all 3 corners of the car.
  70. 2015-11-13 22:25:32 ★ after doing so he would then walk up to the hood as he then ploses it and would then ((Richard Hawkins))
  71. 2015-11-13 22:26:10 ★ roll all 4 aftermarket wheels to the back of the SUV as he then lifts the tyres into the ((Richard Hawkins))
  72. 2015-11-13 22:26:19 ★ back of the suv and closes the hatch. ((Richard Hawkins))
  73. 2015-11-13 22:26:43 ★ Richard Hawkins would then collect all his tools and places them into the toolbox as he then takes the tool
  74. 2015-11-13 22:27:10 ★ -box to the wall of the garage as he then bends down and places it onto the ground. ((R
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!