API tools faq
paste
Advertisement
DaLuppo

E30 RP

DaLuppo
Feb 5th, 2019
146
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 45.08 KB | None | 0 0
raw download clone embed print report
  1. 2019-02-05 16:53:33 ★ Mariana Lopez drives the E30 between the two posts of the car lift and hops out as she kneels
  2. 2019-02-05 16:54:14 ★ down and line up the lifting arms on each side under the E30's pinch welds. ((Mariana Lopez))
  3. 2019-02-05 16:54:31 ★ Mariana Lopez grabs ahold of the remote and presses on a buttom to raise the car up in the air.
  4. 2019-02-05 16:54:51 ★ Mariana Lopez lays both of her palms on the car's body and attempts to wiggle it to ensure that it's
  5. 2019-02-05 16:54:57 ★ safe to work under. ((Mariana Lopez))
  6. 2019-02-05 16:55:30 ★ Mariana Lopez opens the top drawer of her tool box and takes out a ratchet as she gets under
  7. 2019-02-05 16:55:48 ★ the car and starts loosening the 4 bolts that secure the end of the driveshaft to the ((Mariana Lopez))
  8. 2019-02-05 16:55:51 ★ transmission. ((Mariana Lopez))
  9. 2019-02-05 16:56:13 ★ Mariana Lopez moves to the rear side and supports the driveshaft using her left hand while unbolting
  10. 2019-02-05 16:56:49 ★ the 4 bolts that secure the second end of the driveshaft to the differential. ((Mariana Lopez))
  11. 2019-02-05 16:57:19 ★ Mariana Lopez safely lowers the driveshaft and tosses it away from beneath the car for more clearance.
  12. 2019-02-05 16:59:22 ★ Mariana Lopez puts the ratchet back in the tool box and grabs a tire iron as she heads to the
  13. 2019-02-05 16:59:41 ★ rear left side of the vehicle, using the socket on the tire iron to loosen the lug ((Mariana Lopez))
  14. 2019-02-05 16:59:49 ★ nuts securing the rear left wheel in place. ((Mariana Lopez))
  15. 2019-02-05 17:00:09 ★ Mariana Lopez saves the lug nuts aside and grasps onto the left rear wheel, wiggling it out of place
  16. 2019-02-05 17:00:18 ★ and putting it down on the ground. ((Mariana Lopez))
  17. 2019-02-05 17:01:16 ★ Mariana Lopez would then head to the right rear side and undo the 5 lug nuts on the rear right
  18. 2019-02-05 17:01:25 ★ wheel, taking it off afterwards and placing it down. ((Mariana Lopez))
  19. 2019-02-05 17:02:03 ★ Mariana Lopez gets beneath the car and fits her ratchet with the appropriate socket prior to
  20. 2019-02-05 17:02:24 ★ using it in order to loosen the 6 bolts that secure each axle to the output plane on the ((Mariana Lopez))
  21. 2019-02-05 17:02:29 ★ differential. ((Mariana Lopez))
  22. 2019-02-05 17:06:39 ★ Mariana Lopez would then head to the left side and and undoes the two bolts securing the rear
  23. 2019-02-05 17:07:07 ★ left caliper in place, taking it off and resting it on the lower trailing arm to avoid ((Mariana Lopez))
  24. 2019-02-05 17:07:14 ★ tension on the brake line. ((Mariana Lopez))
  25. 2019-02-05 17:07:26 ★ Mariana Lopez would then slide the brake rotor right off, placing it aside.
  26. 2019-02-05 17:07:48 ★ Mariana Lopez grasps onto the end of the left rear axle and wiggles it right off as it would already be
  27. 2019-02-05 17:07:58 ★ loose from the differential. ((Mariana Lopez))
  28. 2019-02-05 17:08:20 ★ Mariana Lopez heads to the right side and uses her ratchet to undo the two bolts securing the rear
  29. 2019-02-05 17:08:42 ★ caliper in place, resting it on the trailing arm and pulling off the brake rotor ((Mariana Lopez))
  30. 2019-02-05 17:08:46 ★ as she puts it down. ((Mariana Lopez))
  31. 2019-02-05 17:09:06 ★ Mariana Lopez grasps onto the end of the right rear axle and pulls it out with a jiggling motion
  32. 2019-02-05 17:09:11 ★ before tossing it away. ((Mariana Lopez))
  33. 2019-02-05 17:10:29 ★ Mariana Lopez gets beneath the car and unplugs the sensor from the back of the stock differential
  34. 2019-02-05 17:10:45 ★ and puts it out of the way. ((Mariana Lopez))
  35. 2019-02-05 17:11:06 ★ Mariana Lopez reaches out for her transmission jack and slides it beneath the stock differential
  36. 2019-02-05 17:11:26 ★ as she pumps up the arm to get the top of the trans jack beneath the differential ((Mariana Lopez))
  37. 2019-02-05 17:11:47 ★ to prevent it from falling at the removal process. ((Mariana Lopez))
  38. 2019-02-05 17:12:20 ★ Mariana Lopez uses her ratchet to undo the back bolt on the bushing that secures the stock
  39. 2019-02-05 17:12:27 ★ differential to the car's frame. ((Mariana Lopez))
  40. 2019-02-05 17:13:13 ★ Mariana Lopez moves to the front and uses the ratchet to undo each one of the 4 bolts that secure
  41. 2019-02-05 17:13:21 ★ the stock diff to the rear subframe. ((Mariana Lopez))
  42. 2019-02-05 17:14:37 ★ Mariana Lopez grabs the arm of the transmission jack and turns it counter clockwise to safely lower
  43. 2019-02-05 17:14:50 ★ the loose differential, completely removing it. ((Mariana Lopez))
  44. 2019-02-05 17:15:35 ★ Mariana Lopez takes off the old diff from the top of the transmission jack and tosses it aside before
  45. 2019-02-05 17:15:53 ★ unboxing the aftermarket rear, loading it on top of the transmission jack. ((Mariana Lopez))
  46. 2019-02-05 17:16:42 ★ Mariana Lopez grabs the spacers that came with the new kit and places them on top of the new
  47. 2019-02-05 17:16:57 ★ differential as they need to go between the new diff and the subframe. ((Mariana Lopez))
  48. 2019-02-05 17:17:23 ★ Mariana Lopez pumps up the handle of the trans jack to raise the new diff up in the air, lining it up
  49. 2019-02-05 17:17:45 ★ with the subframe as she ensures all the mounting holes are aligned. ((Mariana Lopez))
  50. 2019-02-05 17:18:03 ★ Mariana Lopez inserts the four bolts that secure it to the rear subframe before using her ratchet to
  51. 2019-02-05 17:18:07 ★ fasten them. ((Mariana Lopez))
  52. 2019-02-05 17:18:49 ★ Mariana Lopez inserts a bolt in the bushing that holds the new diff to the frame before using her ratchet
  53. 2019-02-05 17:18:53 ★ tighten it. ((Mariana Lopez))
  54. 2019-02-05 17:19:27 ★ Mariana Lopez unboxes the new performance axles and takes out the rear one before fitting it in place
  55. 2019-02-05 17:19:45 ★ and getting beneath the car to line up its end with the new diff output plane. ((Mariana Lopez))
  56. 2019-02-05 17:19:59 ★ Mariana Lopez inserts the 6 bolts in the mounting holes and secures them using the ratchet.
  57. 2019-02-05 17:20:45 ★ Mariana Lopez grabs the second axle and inserts in place prior to aligning its end with the
  58. 2019-02-05 17:21:03 ★ output plane of the diff, fitting the mounting bolts in the holes and securing them ((Mariana Lopez))
  59. 2019-02-05 17:21:09 ★ using the ratchet. ((Mariana Lopez))
  60. 2019-02-05 17:21:52 ★ Mariana Lopez grabs the removed left rotor and puts it in place prior mounting the rear left caliepr
  61. 2019-02-05 17:21:54 Mariana Lopez: (( caliper ))
  62. 2019-02-05 17:22:10 ★ onto it and securing the two bolts holding it in place using her ratchet. ((Mariana Lopez))
  63. 2019-02-05 17:22:31 ★ Mariana Lopez heads to the right side and takes the removed brake rotor as she fits it back on
  64. 2019-02-05 17:22:45 ★ before getting the caliper and placing it on top of it, inserting two bolts in the mounting ((Mariana Lopez))
  65. 2019-02-05 17:22:51 ★ holes and fastening them with a ratchet. ((Mariana Lopez))
  66. 2019-02-05 17:23:29 ★ Mariana Lopez grasps onto the edging of the rear right wheel and lifts it up as she fits it back on
  67. 2019-02-05 17:23:36 ★ and inserts the 5 lug nuts in place. ((Mariana Lopez))
  68. 2019-02-05 17:24:11 ★ Mariana Lopez grabs ahold of her tire iron and uses the end with the socket to tighten these lug
  69. 2019-02-05 17:24:23 ★ nuts in order to hold the rear right wheel in place. ((Mariana Lopez))
  70. 2019-02-05 17:24:37 ★ Mariana Lopez moves to the left side and lifts up the rear left wheel as she fits it back on, tightening
  71. 2019-02-05 17:24:51 ★ the 5 lug nuts that secure it in place using her tire iron. ((Mariana Lopez))
  72. 2019-02-05 17:26:07 ★ Mariana Lopez gets out from beneath the car and grabs the lift remote as she lowers the car back on
  73. 2019-02-05 17:26:10 ★ its wheels. ((Mariana Lopez))
  74. 2019-02-05 17:26:26 ★ Mariana Lopez pulls the handle of the driver door to open it before getting inside and pulling the
  75. 2019-02-05 17:26:33 ★ hood release handle, popping the hood open. ((Mariana Lopez))
  76. 2019-02-05 17:26:50 ★ Mariana Lopez jumps out the car and heads to the front, sliding her figners beneath the hood and
  77. 2019-02-05 17:27:00 ★ raising it up as she supports it with the hood prop. ((Mariana Lopez))
  78. 2019-02-05 17:27:22 ★ Mariana Lopez grabs ahold of her ratchet and supports the hood with her left hand before using the
  79. 2019-02-05 17:27:45 ★ ratchet to undo the two bolts that secure each side of the hood to the hood brackets. ((Mariana Lopez))
  80. 2019-02-05 17:28:01 ★ Mariana Lopez would quickly hold the hood with both hands as she finishes securing the last bolt
  81. 2019-02-05 17:28:13 ★ grunting as she lifts it up and lowers it down on the ground. ((Mariana Lopez))
  82. 2019-02-05 17:29:25 ★ Mariana Lopez grabs ahold of a flathead screwdriver and uses it to undo the negative battery terminal
  83. 2019-02-05 17:29:32 ★ disconnecting it afterwards. ((Mariana Lopez))
  84. 2019-02-05 17:29:46 ★ Mariana Lopez unscrews the positive battery terminal and grabs her ratchet as she uses it to
  85. 2019-02-05 17:29:59 ★ undo the battery mounting belt. ((Mariana Lopez))
  86. 2019-02-05 17:30:13 ★ Mariana Lopez fishes the battery right out of the engine bay and places it down.
  87. 2019-02-05 17:31:13 ★ Mariana Lopez uses the screwdriver to undo the clamps on each end of the upper radiator
  88. 2019-02-05 17:31:15 ★ hose. ((Mariana Lopez))
  89. 2019-02-05 17:31:31 ★ Mariana Lopez takes off the upper radiator hose and tosses it aside before unscrewing the clamps
  90. 2019-02-05 17:31:36 ★ on the bottom radiator hose ((Mariana Lopez))
  91. 2019-02-05 17:31:56 ★ Mariana Lopez takes off the bottom radiator hose as well, tossing it away.
  92. 2019-02-05 17:32:26 ★ Mariana Lopez uses her ratchet to undo the two bolts on each side of the radiator's upper mounting
  93. 2019-02-05 17:32:30 ★ brackets. ((Mariana Lopez))
  94. 2019-02-05 17:32:50 ★ Mariana Lopez reaches down and undoes the bottom radiator mounting bracket to loosen it up.
  95. 2019-02-05 17:33:18 ★ Mariana Lopez disconnects the wire connector on the radiator fan and grasps onto the radiator as
  96. 2019-02-05 17:33:33 ★ she lifts it up, jiggling to make clearance. ((Mariana Lopez))
  97. 2019-02-05 17:33:58 ★ Mariana Lopez rests it down on the ground and grabs ahold of her screwdriver before undoing
  98. 2019-02-05 17:34:22 ★ the screw on each corner of the fan, separating it from the radiator and saving it ((Mariana Lopez))
  99. 2019-02-05 17:34:24 ★ aside. ((Mariana Lopez))
  100. 2019-02-05 17:35:14 ★ Mariana Lopez grabs her ratchet and uses it to undo the three bolts that secure the exhaust heat
  101. 2019-02-05 17:35:35 ★ shield that covers the exhaust manifold. ((Mariana Lopez))
  102. 2019-02-05 17:36:35 ★ Mariana Lopez would then proceed to undo the 9 bolts that hold the exhaust manifold to the engine
  103. 2019-02-05 17:36:38 ★ head. ((Mariana Lopez))
  104. 2019-02-05 17:42:57 ★ Mariana Lopez uses the screwdriver to loosen the clamp on each end of the air intake hose, taking it
  105. 2019-02-05 17:43:04 ★ off as she jiggles it out, tossing it away. ((Mariana Lopez))
  106. 2019-02-05 17:43:30 ★ Mariana Lopez starts plugging off the connects of the main engine harness as she pulls on it to
  107. 2019-02-05 17:43:38 ★ tear it off. ((Mariana Lopez))
  108. 2019-02-05 17:44:25 ★ Mariana Lopez unhooks the throttle cable from the throttle body and tucks it aside in the engine bay
  109. 2019-02-05 17:44:42 ★ ensuring that it won't get damaged when the old engine is being pulled out. ((Mariana Lopez))
  110. 2019-02-05 17:45:12 ★ Mariana Lopez grabs an open end wrench and uses it to loosen the nut on each end of the fuel
  111. 2019-02-05 17:45:14 ★ feed line. ((Mariana Lopez))
  112. 2019-02-05 17:45:29 ★ Mariana Lopez takes off the fuel feed line and tosses it away before loosening the nut on each
  113. 2019-02-05 17:45:38 ★ end of the return line, also taking it off and throwing it away. ((Mariana Lopez))
  114. 2019-02-05 17:46:46 ★ Mariana Lopez takes a flathead screwdriver and uses it to undo the four screws that hold the
  115. 2019-02-05 17:46:56 ★ airbox in place, taking it off and placing it down on the ground. ((Mariana Lopez))
  116. 2019-02-05 17:48:09 ★ Mariana Lopez grabs the lift remote and presses on a button to raise the car up in the air before
  117. 2019-02-05 17:48:51 ★ getting under it and using her ratchet to loosen the two bolts on the exhaust flange ((Mariana Lopez))
  118. 2019-02-05 17:49:03 ★ between the exhaust manifold and the mid pipe. ((Mariana Lopez))
  119. 2019-02-05 17:49:49 ★ Mariana Lopez undoes the midpipe hanger bracket and moves to the rear side as she carefully undoes
  120. 2019-02-05 17:50:07 ★ the bolts on the rear pipe hanger brackets, standing out of the way as she allows ((Mariana Lopez))
  121. 2019-02-05 17:50:12 ★ the exhaust assembly to fall down. ((Mariana Lopez))
  122. 2019-02-05 17:50:31 ★ Mariana Lopez bends overs and grabs onto it, sliding it right out from beneath the car.
  123. 2019-02-05 17:51:10 ★ Mariana Lopez gets out from under the car and presses on a buttom from the lift remote, lowering
  124. 2019-02-05 17:51:13 ★ the car back down. ((Mariana Lopez))
  125. 2019-02-05 17:51:33 ★ Mariana Lopez opens the driver door and sits herself on the driver seat before taking off the plastic
  126. 2019-02-05 17:51:39 ★ cover around the shifter. ((Mariana Lopez))
  127. 2019-02-05 17:52:00 ★ Mariana Lopez uses her ratchet to undo the bolt on each corner of the plate that secures the
  128. 2019-02-05 17:52:05 ★ shifter in place. ((Mariana Lopez))
  129. 2019-02-05 17:52:20 ★ Mariana Lopez takes off that metal plate and saves it on the passenger seat before jumping out
  130. 2019-02-05 17:52:30 ★ and pressing on a button to raise the car back up. ((Mariana Lopez))
  131. 2019-02-05 17:52:49 ★ Mariana Lopez gets under the car and slides her transmission jack along, lining it up with the
  132. 2019-02-05 17:53:05 ★ transmission and pumping the jack arm to raise the saddle right beneath the ((Mariana Lopez))
  133. 2019-02-05 17:53:19 ★ transmission as she supports it to prevent it from falling in the removal process. ((Mariana Lopez))
  134. 2019-02-05 17:53:55 ★ Mariana Lopez plugs off the speed sensor along with the wire connector on the starter before
  135. 2019-02-05 17:55:09 ★ using her ratchet to undo the 10 bolts that secure the bell housing to the engine. ((Mariana Lopez))
  136. 2019-02-05 17:55:52 ★ Mariana Lopez uses the ratchet to undo the two bolts on each transmission mount before loosening
  137. 2019-02-05 17:56:07 ★ the transmission crossmember and taking it off. ((Mariana Lopez))
  138. 2019-02-05 17:56:23 ★ Mariana Lopez grasps onto the arm of the transmission jack, slowly turning counter clockwise to
  139. 2019-02-05 17:56:34 ★ lower the stock transmission down. ((Mariana Lopez))
  140. 2019-02-05 17:56:53 ★ Mariana Lopez slides the transmission jack out from beneath the car and unloads the stock transmission
  141. 2019-02-05 17:57:00 ★ off of its saddle. ((Mariana Lopez))
  142. 2019-02-05 17:57:37 ★ Mariana Lopez gets back under the car and loosens the two bolts on each of the 3 engine mounts.
  143. 2019-02-05 17:57:58 ★ Mariana Lopez gets out from under the car and uses the lift's remote to lower the car back down.
  144. 2019-02-05 17:58:21 ★ Mariana Lopez lays her palms on the engine cherrypicker before pushing it near the engine bay.
  145. 2019-02-05 17:58:41 ★ Mariana Lopez grasps onto the loose exhaust manifold and jiggles it out of place as she
  146. 2019-02-05 17:58:45 ★ throws it away. ((Mariana Lopez))
  147. 2019-02-05 18:01:22 ★ Mariana Lopez takes out two engine lifting brackets from the tool box's top drawer and fits them on the
  148. 2019-02-05 18:02:01 ★ holes supposed to be used to mount the exhaust manifold before securing them ((Mariana Lopez))
  149. 2019-02-05 18:02:04 ★ with a ratchet. ((Mariana Lopez))
  150. 2019-02-05 18:02:22 ★ Mariana Lopez grabs the chain from the cherrypicker and inserts it in through the hole in the first
  151. 2019-02-05 18:02:37 ★ engine lifting bracket before going through the second one and finally securing it back ((Mariana Lopez))
  152. 2019-02-05 18:02:58 ★ at the cherry picker's leveler to ensure that the engine is safely chained to the ((Mariana Lopez))
  153. 2019-02-05 18:03:02 ★ cherrypicker. ((Mariana Lopez))
  154. 2019-02-05 18:03:19 ★ Mariana Lopez keeps her eyes on the engine bay as she grabs the arm of the engine crane, pumping it
  155. 2019-02-05 18:03:30 ★ up to slowly raise the old engine out of the engine bay. ((Mariana Lopez))
  156. 2019-02-05 18:03:50 ★ Mariana Lopez would do it extremely slowly to ensure that she doesn't bend the frame or damage
  157. 2019-02-05 18:03:54 ★ any part. ((Mariana Lopez))
  158. 2019-02-05 18:04:35 ★ Mariana Lopez pushes the engine crane away from the car as soon as the engine gets to a level
  159. 2019-02-05 18:04:40 ★ higher than the engine bay. ((Mariana Lopez))
  160. 2019-02-05 18:05:00 ★ Mariana Lopez slowly turns the arm of the engine crane to lower the engine on a wooden pallet.
  161. 2019-02-05 18:05:29 ★ Mariana Lopez uses her ratchet to undo the two engine lifting brackets off of the engine and moves
  162. 2019-02-05 18:05:35 ★ the crane away from the old engine. ((Mariana Lopez))
  163. 2019-02-05 18:11:45 ★ Mariana Lopez uses her ratchet to undo the bolts that secure the firewall foam layer that isolates
  164. 2019-02-05 18:12:04 ★ the heat and sound between the engine bay and the interior. ((Mariana Lopez))
  165. 2019-02-05 18:12:36 ★ Mariana Lopez starting tearing the foam layer right off as she tosses the removed parts aside.
  166. 2019-02-05 18:13:03 ★ Mariana Lopez would completely reveal the firewall and the transmission tunnel when she's done
  167. 2019-02-05 18:13:06 ★ taking off the foam layer. ((Mariana Lopez))
  168. 2019-02-05 18:16:15 ★ Mariana Lopez takes her plastic mallet and starts tapping the mallet against the firewall to bend it
  169. 2019-02-05 18:16:25 ★ inward in order to make clearance for the LS3 engine. ((Mariana Lopez))
  170. 2019-02-05 18:17:04 ★ Mariana Lopez moves on to the transmission tunnel as she taps the curves with the mallet to
  171. 2019-02-05 18:17:14 ★ bend them inward for the T56 transmission to fit in there. ((Mariana Lopez))
  172. 2019-02-05 18:24:08 ★ Mariana Lopez puts the mallet aside and heads to the new engine as she takes a look around, ensuring
  173. 2019-02-05 18:24:17 ★ that everything is there. ((Mariana Lopez))
  174. 2019-02-05 18:26:20 ★ Mariana Lopez unboxes the transmission grunts as she lifts it up carefully moving it on top of the
  175. 2019-02-05 18:26:25 ★ transmission jack. ((Mariana Lopez))
  176. 2019-02-05 18:27:30 ★ Mariana Lopez pushes the transmission jack near the engine transmission shaft before taking the
  177. 2019-02-05 18:27:46 ★ flywheel out of the box and fitting it in place as she inserts the 6 bolts that secure it ((Mariana Lopez))
  178. 2019-02-05 18:27:50 ★ in place in the holes. ((Mariana Lopez))
  179. 2019-02-05 18:28:09 ★ Mariana Lopez uses her ratchet to tighten these 6 bolts in order to secure the flywheel to the engine.
  180. 2019-02-05 18:29:56 ★ Mariana Lopez takes out the clutch and fits it onto the engine output shaft before taking out
  181. 2019-02-05 18:30:11 ★ the pressure plate and fitting it on against the clutch disk. ((Mariana Lopez))
  182. 2019-02-05 18:30:38 ★ Mariana Lopez inserts the four bolts that secure the pressure plate to the engine before tightening
  183. 2019-02-05 18:30:43 ★ them using a ratchet. ((Mariana Lopez))
  184. 2019-02-05 18:31:01 ★ Mariana Lopez would then line up the bell housing with the mounting holes on the engine before
  185. 2019-02-05 18:31:56 ★ inserting the 8 bolts through the bell housing and the engine holes. ((Mariana Lopez))
  186. 2019-02-05 18:32:11 ★ Mariana Lopez uses her ratchet to secure these 8 bolts before fitting her torque wrench with the
  187. 2019-02-05 18:32:27 ★ right socket and torquing each one of these 8 bolts to 25ft-lb. ((Mariana Lopez))
  188. 2019-02-05 18:33:19 ★ Mariana Lopez grabs the cherrypicker and pushes it near the engine and transmission assembly
  189. 2019-02-05 18:33:33 ★ as she grabs the chain and inserts it through the engine's lifting brackets. ((Mariana Lopez))
  190. 2019-02-05 18:33:47 ★ Mariana Lopez secures the chain and pumps the arm of the cherry picker to lift the engine up in the
  191. 2019-02-05 18:34:01 ★ air, approximately a bit higher than the E30's engine bay for clearance. ((Mariana Lopez))
  192. 2019-02-05 18:34:12 ★ Mariana Lopez pushes the cherry picker as she moves it near the engine bay.
  193. 2019-02-05 18:34:32 ★ Mariana Lopez uses the adjusting bolt on the cherry picker's leveler to slightly tilt the transmission
  194. 2019-02-05 18:34:48 ★ so that it's lower than the engine level in order for it to fit into its tunnel. ((Mariana Lopez))
  195. 2019-02-05 18:35:11 ★ Mariana Lopez leaves the engine hanging in the air and takes out the transmission and engine mounts from
  196. 2019-02-05 18:35:26 ★ the package. ((Mariana Lopez))
  197. 2019-02-05 18:36:31 ★ Mariana Lopez fits the engine mounts to the engine and inserts the bolts before tightening them
  198. 2019-02-05 18:36:34 ★ using a ratchet. ((Mariana Lopez))
  199. 2019-02-05 18:46:10 ★ Mariana Lopez would then fit the transmission mounts onto the bell housing, inserting the bolts
  200. 2019-02-05 18:46:21 ★ in place and securing them using her ratchet. ((Mariana Lopez))
  201. 2019-02-05 18:47:58 ★ Mariana Lopez grabs the cherry picker's arm and turns counter clockwise in order to slowly lower
  202. 2019-02-05 18:48:09 ★ the engine and transmission assembly into the E30's bay. ((Mariana Lopez))
  203. 2019-02-05 18:48:31 ★ Mariana Lopez would be extremely careful, watching out to damage any of the parts and ensuring
  204. 2019-02-05 18:48:43 ★ that the engine and the transmission have enough clearance to ((Mariana Lopez))
  205. 2019-02-05 18:48:47 ★ drop into the engine bay. ((Mariana Lopez))
  206. 2019-02-05 18:49:14 ★ Mariana Lopez stops once the transmission is in its tunnel, she'd use the adjusting bolt on the engine
  207. 2019-02-05 18:49:32 ★ crane's leveler to slowly tilt the engine and tranny assembly so that they're both ((Mariana Lopez))
  208. 2019-02-05 18:49:38 ★ at the same level of height. ((Mariana Lopez))
  209. 2019-02-05 18:49:56 ★ Mariana Lopez gets back to the cherry picker's arm and turns counter clockwise to drop off the
  210. 2019-02-05 18:50:01 ★ engine on its mounts. ((Mariana Lopez))
  211. 2019-02-05 18:52:36 ★ Mariana Lopez takes off the chain from the engine's lifting brackets and moves the cherry picker
  212. 2019-02-05 18:52:42 ★ away from the car for more clearance. ((Mariana Lopez))
  213. 2019-02-05 18:53:23 ★ Mariana Lopez grabs the lift's remote and presses on a button to raise the car up in the air.
  214. 2019-02-05 18:53:34 ★ Mariana Lopez gets under the car after fitting her ratchet with the right socket.
  215. 2019-02-05 18:53:56 ★ Mariana Lopez uses the ratchet to tighten the two bolts on each of the two transmission mounts.
  216. 2019-02-05 18:54:19 ★ Mariana Lopez grabs ahold of the new transmission crossmember and fits it on under the transmission
  217. 2019-02-05 18:54:33 ★ as she inserts the bolts in the holes and fastens them with her ratchet to secure the ((Mariana Lopez))
  218. 2019-02-05 18:54:43 ★ crossmember beneath the transmission. ((Mariana Lopez))
  219. 2019-02-05 19:00:16 ★ Mariana Lopez grabs ahold of the new driveshaft that came with the engine and moves it on the transmission
  220. 2019-02-05 19:00:30 ★ jack before pumping up the lever to raise the shaft up beneath the car. ((Mariana Lopez))
  221. 2019-02-05 19:00:38 ★ Mariana Lopez lines up the flange with the output shaft on the
  222. 2019-02-05 19:00:52 ★ transmission before inserting the four bolts in and tightening them using her ratchet. ((Mariana Lopez))
  223. 2019-02-05 19:01:06 ★ Mariana Lopez moves on to the rear side and connects the end of the driveshaft to the aftermarket
  224. 2019-02-05 19:01:23 ★ differential prior to hand fitting the bolts in place and securing them tightly. ((Mariana Lopez))
  225. 2019-02-05 19:04:12 ★ Mariana Lopez uses the ratchet to secure the four bolts that hold the driveshaft to the differential.
  226. 2019-02-05 19:05:08 ★ Mariana Lopez lowers the transmission jack after the driveshaft is completely secured in place.
  227. 2019-02-05 19:05:16 ★ Mariana Lopez moves the transmission jack away from beneath the car.
  228. 2019-02-05 19:44:51 ★ Mariana Lopez grabs the lift remote and presses on a button to lower the car back down.
  229. 2019-02-05 19:45:17 ★ Mariana Lopez grabs the throttle cable and hooks its end on the new engine's throttle body before
  230. 2019-02-05 19:45:22 ★ securing it. ((Mariana Lopez))
  231. 2019-02-05 19:46:17 ★ Mariana Lopez tears off the carton on the box that contains the fuel line kit's package before taking out
  232. 2019-02-05 19:46:32 ★ the feed and return lines along with the mounting equipment. ((Mariana Lopez))
  233. 2019-02-05 19:46:55 ★ Mariana Lopez installs the o rings on each end of the fuel feed line and connects one end to the
  234. 2019-02-05 19:47:19 ★ outlet from the firewall, the other end to the port on the fuel rail. ((Mariana Lopez))
  235. 2019-02-05 19:47:33 ★ Mariana Lopez takes an open end wrench and secures the nut that secures each end of the fuel
  236. 2019-02-05 19:47:37 ★ feed line. ((Mariana Lopez))
  237. 2019-02-05 19:48:01 ★ Mariana Lopez fits the fuel return line with the o rings on its ends and plugs one end to the port on
  238. 2019-02-05 19:48:17 ★ the firewall, the other end to the fuel regulator on the fuel rail. ((Mariana Lopez))
  239. 2019-02-05 19:48:32 ★ Mariana Lopez uses the open end wrench to tighten the nut on each end to secure the fuel return
  240. 2019-02-05 19:48:35 ★ line in place. ((Mariana Lopez))
  241. 2019-02-05 19:49:55 ★ Mariana Lopez grabs ahold of the removed fan and fits it onto the new radiator before getting
  242. 2019-02-05 19:50:12 ★ her screwdriver and tightening the screw on each corner of the fan to secure it to ((Mariana Lopez))
  243. 2019-02-05 19:50:16 ★ the new radiator. ((Mariana Lopez))
  244. 2019-02-05 19:50:42 ★ Mariana Lopez lifts up the radiator and carefully lowers it into the engine bay as she lines up the
  245. 2019-02-05 19:50:50 ★ mounting holes with the radiator bracket. ((Mariana Lopez))
  246. 2019-02-05 19:51:29 ★ Mariana Lopez uses her ratchet to tighten the two bolts on each of the 3 radiator mounting brackets
  247. 2019-02-05 19:51:47 ★ before unboxing the hose kit and taking out the upper radiator hose, connecting one ((Mariana Lopez))
  248. 2019-02-05 19:51:56 ★ end to the radiator's port and the other one to the ((Mariana Lopez))
  249. 2019-02-05 19:52:10 ★ port on the water pump. ((Mariana Lopez))
  250. 2019-02-05 19:52:24 ★ Mariana Lopez slides two clamps on each end of the exhaust and uses a flathead screwdriver to
  251. 2019-02-05 19:52:36 ★ tighten the screw on each clamp in order to compress it and secure the hose. ((Mariana Lopez))
  252. 2019-02-05 19:52:56 ★ Mariana Lopez takes out the lower radiator hose and slides a clamp on each end before connecting one
  253. 2019-02-05 19:53:17 ★ to the appropriate port from the radiator and the other one to the port from the engine ((Mariana Lopez))
  254. 2019-02-05 19:53:18 ★ block. ((Mariana Lopez))
  255. 2019-02-05 19:53:33 ★ Mariana Lopez uses the screwdriver to tighten the screws on the clamps in order to compress them.
  256. 2019-02-05 19:54:31 ★ Mariana Lopez tears the carton on the air intake kit before taking out the new airbox and fitting it
  257. 2019-02-05 19:54:45 ★ in place prior to securing it using the 4 screws and the screwdriver. ((Mariana Lopez))
  258. 2019-02-05 19:55:07 ★ Mariana Lopez takes out the air intake hose and slides a clamp on each end before connecting
  259. 2019-02-05 19:55:24 ★ one end to the supercharger's air inlet and the other end to the pod filter from the ((Mariana Lopez))
  260. 2019-02-05 19:55:27 ★ air intake kit. ((Mariana Lopez))
  261. 2019-02-05 19:55:41 ★ Mariana Lopez uses the screwdriver to compress the two clamps by tightening the screws.
  262. 2019-02-05 19:56:01 ★ Mariana Lopez lays the pod filter in the airbox and grabs the plastic lid before putting it on the airbox
  263. 2019-02-05 19:56:04 ★ to cover it. ((Mariana Lopez))
  264. 2019-02-05 19:56:28 ★ Mariana Lopez uses her screwdriver to tighten the screw on each of the 4 corners from the airbox's
  265. 2019-02-05 19:56:31 ★ lid. ((Mariana Lopez))
  266. 2019-02-05 19:57:32 ★ Mariana Lopez bends over and picks up the removed battery as she places it in its location prior to
  267. 2019-02-05 19:57:48 ★ fitting the mounting belt and securing it by tightening the bolt on each side of the ((Mariana Lopez))
  268. 2019-02-05 19:57:53 ★ belt using a ratchet. ((Mariana Lopez))
  269. 2019-02-05 20:00:44 ★ Mariana Lopez reconnects both battery terminals and uses a screwdriver to tighten them in place.
  270. 2019-02-05 20:02:18 ★ Mariana Lopez takes the new stainless steel headers and drops one on each side of the V8 engine
  271. 2019-02-05 20:02:37 ★ ensuring that the mounting holes are lined up together before grabbing the new ((Mariana Lopez))
  272. 2019-02-05 20:03:03 ★ gaskets and inserting one between each of the headers and the engine. ((Mariana Lopez))
  273. 2019-02-05 20:03:20 ★ Mariana Lopez inserts the bolts in the mounting holes on each side of the headers and grabs her
  274. 2019-02-05 20:03:42 ★ ratchet as she uses it to tighten the nuts on each side of the headers. ((Mariana Lopez))
  275. 2019-02-05 20:04:19 ★ Mariana Lopez plug the wire connector to the fan on the radiator before glancing around the
  276. 2019-02-05 20:04:32 ★ engine bay, reconnecting any necessary wiring. ((Mariana Lopez))
  277. 2019-02-05 20:05:16 ★ Mariana Lopez presses on a button from the lift remote to raise the car up in the air as she gets under it
  278. 2019-02-05 20:05:29 ★ to reconnect the speed sensor on the new transmission along with the wire connector ((Mariana Lopez))
  279. 2019-02-05 20:05:32 ★ to the starter. ((Mariana Lopez))
  280. 2019-02-05 20:07:04 ★ Mariana Lopez puts the ratchet aside and takes a tire iron as she gets to the side, undoing the lug
  281. 2019-02-05 20:07:09 ★ nuts on the left front wheel. ((Mariana Lopez))
  282. 2019-02-05 20:07:19 ★ Mariana Lopez grasps onto the wheel and pulls it right out as she places it down.
  283. 2019-02-05 20:07:41 ★ Mariana Lopez slightly lowers the car down, approximately half a meter above the ground before opening
  284. 2019-02-05 20:07:58 ★ the driver door and steering all the way to the left to give Mariana more clearance ((Mariana Lopez))
  285. 2019-02-05 20:08:06 ★ to the steering parts. ((Mariana Lopez))
  286. 2019-02-05 20:08:21 ★ Mariana Lopez shuts the door and takes a knee next to the left front fender.
  287. 2019-02-05 20:10:25 ★ Mariana Lopez grabs a hydraulic jack and slides it beneath the control arm before pumping the arm
  288. 2019-02-05 20:10:40 ★ to raise the saddle right beneath the control arm to release the tension on the bolts ((Mariana Lopez))
  289. 2019-02-05 20:10:45 ★ for easy removal. ((Mariana Lopez))
  290. 2019-02-05 20:11:45 ★ Mariana Lopez uses the ratchet to undo the 3 bolts that secure the left control arm, jiggling it out of
  291. 2019-02-05 20:11:49 ★ place afterwards. ((Mariana Lopez))
  292. 2019-02-05 20:13:48 ★ Mariana Lopez tosses it aside before grabbing the new control arm from the wisefab kit, fitting it
  293. 2019-02-05 20:14:00 ★ in place and inserting the each of the three mounting bolts in the holes. ((Mariana Lopez))
  294. 2019-02-05 20:14:23 ★ Mariana Lopez secures them using her ratchet and gives it a shake to ensure it's firmly installed.
  295. 2019-02-05 20:17:48 ★ Mariana Lopez takes a needlenose pliers and uses it to open up the cotter pin on the nut securing
  296. 2019-02-05 20:17:56 ★ the outer tie rod. ((Mariana Lopez))
  297. 2019-02-05 20:18:19 ★ Mariana Lopez would then pull it right out of the hole in the nut.
  298. 2019-02-05 20:18:39 ★ Mariana Lopez takes the ratchet and loosens the nut on the bottom of the outer tie rod to loosen it.
  299. 2019-02-05 20:19:09 ★ Mariana Lopez grabs ahold of a plastic mallet and taps the bottom of the outer rod to force it out
  300. 2019-02-05 20:19:26 ★ of the slotting on the steering knuckle ((Mariana Lopez))
  301. 2019-02-05 20:23:04 ★ Mariana Lopez uses the needle nose pliers to compress the clamp that holds the rack boot tubing.
  302. 2019-02-05 20:23:18 ★ Mariana Lopez pulls the clamp right off and grasps onto the rack boot as she pulls it out too.
  303. 2019-02-05 20:25:40 ★ Mariana Lopez grabs ahold of a tie rod tool and fits it on the left inner tie rod before turning
  304. 2019-02-05 20:25:46 ★ counter clockwise to take it off. ((Mariana Lopez))
  305. 2019-02-05 20:26:05 ★ Mariana Lopez grabs the new tire rod and fits the tie rod tool on it before fitting it in place and
  306. 2019-02-05 20:26:10 ★ tightening it using the tool. ((Mariana Lopez))
  307. 2019-02-05 20:26:27 ★ Mariana Lopez fits the rack boot tubing back on along with the clamp.
  308. 2019-02-05 20:27:02 ★ Mariana Lopez slides the outer tie rod in the slotting on the left steering knuckle before fitting the nut
  309. 2019-02-05 20:27:25 ★ on the bottom and using a ratcheting wrench to tighten in order to secure the tie rods. ((Mariana Lopez))
  310. 2019-02-05 20:28:24 ★ Mariana Lopez grabs ahold of the removed wheel and fits it back on before inserting the lug nuts
  311. 2019-02-05 20:28:37 ★ in the holes, using a tire iron to tighten these in a criss cross pattern. ((Mariana Lopez))
  312. 2019-02-05 20:28:53 ★ Mariana Lopez pushes herself up and heads to the driver door as she opens it and steers all the way to the
  313. 2019-02-05 20:29:12 ★ right to make clearance to the right steering parts. ((Mariana Lopez))
  314. 2019-02-05 20:29:31 ★ Mariana Lopez heads to the right side and kneels down as she uses the tire iron to remove the 5
  315. 2019-02-05 20:29:39 ★ lug nuts on the right front wheel. ((Mariana Lopez))
  316. 2019-02-05 20:29:54 ★ Mariana Lopez jiggles the wheel off of the car and puts it down before getting her ratchet and using
  317. 2019-02-05 20:30:38 ★ it to remove each of the three nuts that secure the right lower control arm in place. ((Mariana Lopez))
  318. 2019-02-05 20:30:59 ★ Mariana Lopez slides the jack below the control arm and raises the saddle up to support it right before
  319. 2019-02-05 20:31:07 ★ taking off the last bolt. ((Mariana Lopez))
  320. 2019-02-05 20:31:23 ★ Mariana Lopez uses the ratchet to take off the last bolt before grabbing the new control arm and
  321. 2019-02-05 20:31:27 ★ fitting it in place. ((Mariana Lopez))
  322. 2019-02-05 20:31:44 ★ Mariana Lopez inserts the three bolts in the mounting holes and uses the ratchet to secure them
  323. 2019-02-05 20:31:46 ★ one by one. ((Mariana Lopez))
  324. 2019-02-05 20:36:11 ★ Mariana Lopez uses the needle nose pliers to straighten up the clip on the bottom nut of the
  325. 2019-02-05 20:36:20 ★ outer tie rod prior to pulling it out of place. ((Mariana Lopez))
  326. 2019-02-05 20:36:37 ★ Mariana Lopez uses the ratchet to undo the nut securing the outer tie rod to the steering knuckle before
  327. 2019-02-05 20:36:58 ★ grabbing the mallet and tapping the tie rod to knock it out of the steering knuckle. ((Mariana Lopez))
  328. 2019-02-05 20:37:43 ★ Mariana Lopez uses the needle nose pliers to compress the clamp that secure the rack boot before pulling
  329. 2019-02-05 20:37:45 ★ it off. ((Mariana Lopez))
  330. 2019-02-05 20:38:03 ★ Mariana Lopez grasps onto the boot and pulls it right off the reveal the ball joint of the inner tie rod.
  331. 2019-02-05 20:38:22 ★ Mariana Lopez fits the tie rod tool on the inner tie rod and turns counter clockwise to loosen it
  332. 2019-02-05 20:38:27 ★ as she eventually takes it off. ((Mariana Lopez))
  333. 2019-02-05 20:38:53 ★ Mariana Lopez grabs the new assembled tie rod from the wisefab kit and slides the outer tie rod
  334. 2019-02-05 20:39:07 ★ in the slot from the right steering knuckle before fitting the nut that secures it ((Mariana Lopez))
  335. 2019-02-05 20:39:13 ★ and tightening it using her ratchet. ((Mariana Lopez))
  336. 2019-02-05 20:39:38 ★ Mariana Lopez fits the tie rod tool on the outer tie rod and fits it in place before turning the tool
  337. 2019-02-05 20:39:48 ★ in order to secure the inner tie rod. ((Mariana Lopez))
  338. 2019-02-05 20:40:13 ★ Mariana Lopez slides the rack boot back on along with the clamp as she secures them in place.
  339. 2019-02-05 20:43:34 ★ Mariana Lopez grabs the removed wheel and puts it back in place as she uses the tire iron to
  340. 2019-02-05 20:43:45 ★ tighten the five lug nuts on the right front wheel. ((Mariana Lopez))
  341. 2019-02-05 20:44:09 ★ Mariana Lopez puts the tire iron aside and bends over as she grasps onto the edging of the removed hood,
  342. 2019-02-05 20:44:29 ★ lifting it up and properly fitting it back on as she supports it up with her left hand while ((Mariana Lopez))
  343. 2019-02-05 20:44:47 ★ using her right one to tightening two bolts on each side of the hood, securing it to ((Mariana Lopez))
  344. 2019-02-05 20:44:56 ★ its mounting brackets before shutting it down. ((Mariana Lopez))
  345. 2019-02-05 21:14:37 ★ Mariana Lopez presses on a button from the lift's remote to raise the car up in the air as she gets under
  346. 2019-02-05 21:15:54 ★ the car, sliding the transmission jack along with her and placing it beneath the fuel tank. ((Mariana Lopez))
  347. 2019-02-05 21:16:46 ★ Mariana Lopez uses her ratchet to undo the bolt on each side of the two fuel tank straps.
  348. 2019-02-05 21:17:03 ★ Mariana Lopez would then put the ratchet aside and grab her open end wrench, using it to loosen the nuts
  349. 2019-02-05 21:17:14 ★ that secure the fuel return line and the fuel feed line to the tank. ((Mariana Lopez))
  350. 2019-02-05 21:17:29 ★ Mariana Lopez grasps onto the arm of the transmission jack and turns it counter clockwise to lower
  351. 2019-02-05 21:17:34 ★ the fuel tank down. ((Mariana Lopez))
  352. 2019-02-05 21:17:52 ★ Mariana Lopez slides the transmission jack out from beneath the car and takes a knee as she grabs
  353. 2019-02-05 21:18:19 ★ Mariana Lopez her ratchet, using it to undo the 5 bolts securing the fuel pump assembly to the fuel tank.
  354. 2019-02-05 21:18:53 ★ Mariana Lopez fishes the fuel pump assembly right out of the fuel tank before placing it down and using
  355. 2019-02-05 21:19:48 ★ her screwdriver to loosen the screws on the plastic lid. ((Mariana Lopez))
  356. 2019-02-05 21:20:06 ★ Mariana Lopez takes off the plastic lid and disconnects the wire connector from the stock fuel
  357. 2019-02-05 21:20:25 ★ pump before taking her new aftermarket fuel pump, dropping it in the fuel pump assembly ((Mariana Lopez))
  358. 2019-02-05 21:20:40 ★ and connecting the wire connector to it. ((Mariana Lopez))
  359. 2019-02-05 21:20:56 ★ Mariana Lopez puts the lid back on and uses her screwdriver to tighten it before grabbing the fuel
  360. 2019-02-05 21:21:04 ★ pump assembly and dropping it in the fuel tank. ((Mariana Lopez))
  361. 2019-02-05 21:21:26 ★ Mariana Lopez inserts the 5 bolts into the mounting holes and uses her ratcheting wrench to tighten
  362. 2019-02-05 21:21:37 ★ them in order to secure the fuel pump assembly to the fuel tank. ((Mariana Lopez))
  363. 2019-02-05 21:21:57 ★ Mariana Lopez slides the transmission jack with the fuel tank on top of it under the car before pumping
  364. 2019-02-05 21:22:10 ★ the jack's arm to raise the fuel tank up in place. ((Mariana Lopez))
  365. 2019-02-05 21:22:32 ★ Mariana Lopez properly positions it back in place and reconnects the fuel feed line along with
  366. 2019-02-05 21:23:12 ★ the fuel return line prior to using her ratchet to secure the bolt on each side of the ((Mariana Lopez))
  367. 2019-02-05 21:23:23 ★ two fuel tank straps to hold it in place. ((Mariana Lopez))
  368. 2019-02-05 21:23:43 ★ Mariana Lopez secures the fuel return line and the fuel feed line by tightening the nut on each end
  369. 2019-02-05 21:23:48 ★ using an open end wrench. ((Mariana Lopez))
  370. 2019-02-05 21:33:33 ★ Mariana Lopez heads to her workbench and grabs a welding headshield as she puts it on to protect
  371. 2019-02-05 21:33:56 ★ her eyes and face from the heat that the welder produces. ((Mariana Lopez))
  372. 2019-02-05 22:07:56 ★ Mariana Lopez grabs two 45 degree pipes from the DIY exhaust kit and places them together as she forms an
  373. 2019-02-05 22:07:59 ★ X shape. ((Mariana Lopez))
  374. 2019-02-05 22:08:34 ★ Mariana Lopez reaches out for a market and marks the contact surface between these two pipes
  375. 2019-02-05 22:09:06 ★ before grabbing her saw and carefully spinning it as she lines up the saw with the ((Mariana Lopez))
  376. 2019-02-05 22:09:50 ★ marked line, cutting a small piece from each pipe so that they could merge together ((Mariana Lopez))
  377. 2019-02-05 22:09:53 ★ to form the X. ((Mariana Lopez))
  378. 2019-02-05 22:39:41 ★ Mariana Lopez puts on a pair of protective gloves and adjusts the welder machine to 10 amps before
  379. 2019-02-05 22:40:56 ★ grabbing the torch along with a welding cable, she'd place the tip of the cable ((Mariana Lopez))
  380. 2019-02-05 22:41:21 ★ against the shared surface of the two 45 degree pipes, heating it up with the torch from the ((Mariana Lopez))
  381. 2019-02-05 22:41:33 ★ welder in order to weld the two pipes together. ((Mariana Lopez))
  382. 2019-02-05 22:43:51 ★ Mariana Lopez grabs two more 45 degree tubes and places one next to each side of the X shaped
  383. 2019-02-05 22:44:07 ★ pipes to form the translation between the X and the straight pipes. ((Mariana Lopez))
  384. 2019-02-05 22:49:06 ★ Mariana Lopez places the tip of the welding rod against the surface between the X pipes and the other two
  385. 2019-02-05 22:49:22 ★ 45 degree pipes as she presses on the trigger, welding all around the pipes to ((Mariana Lopez))
  386. 2019-02-05 22:49:28 ★ secure them together. ((Mariana Lopez))
  387. 2019-02-05 22:54:24 ★ Mariana Lopez gets two straight pipes and places one on each side to form the rear pipes.
  388. 2019-02-05 22:54:48 ★ Mariana Lopez places the tip of the welding rod against the shared surface of the straight pipes and
  389. 2019-02-05 22:55:16 ★ the 45 degree pipes as she presses on the trigger to weld them together, ensuring ((Mariana Lopez))
  390. 2019-02-05 22:55:45 ★ that she leaves no leaks. ((Mariana Lopez))
  391. 2019-02-05 22:56:34 ★ Mariana Lopez turns of the stick welder machine and puts the tools away as she then takes off the
  392. 2019-02-05 22:57:05 ★ headguard, carrying the exhaust system she built and placing it on trans jack before sliding ((Mariana Lopez))
  393. 2019-02-05 22:57:13 ★ it beneath the car and raising it up. ((Mariana Lopez))
  394. 2019-02-05 22:57:34 ★ Mariana Lopez lines up the two end with the tip of the exhaust heads before sliding a clamp on each
  395. 2019-02-05 22:57:42 ★ end and tightening them using a screwdriver. ((Mariana Lopez))
  396. 2019-02-05 22:58:57 ★ Mariana Lopez puts the headguard back on and turns on the stick welder machine prior to getting beneath
  397. 2019-02-05 22:59:26 ★ the car and welding the tip of an exhaust hanger to the exhaust pipe, the other end ((Mariana Lopez))
  398. 2019-02-05 22:59:30 ★ to the car's chassis. ((Mariana Lopez))
  399. 2019-02-05 22:59:50 ★ Mariana Lopez welds another exhaust hanger to the pipe on the other side before giving the exhaust
  400. 2019-02-05 23:00:16 ★ a shake to ensure that no rattling is there. ((Mariana Lopez))
  401. 2019-02-05 23:00:51 ★ Mariana Lopez grabs the lift remote and presses on a button to lower the car down after moving the
  402. 2019-02-05 23:01:06 ★ transmission jack away from beneath it. ((Mariana Lopez))
  403. 2019-02-05 23:02:20 ★ Mariana Lopez opens the front passenger door and hops in as she opens the glove box and takes
  404. 2019-02-05 23:03:17 ★ off the side clips that the glove box hangs on before using her screwdriver to take ((Mariana Lopez))
  405. 2019-02-05 23:03:31 ★ off the black cover above the glove box. ((Mariana Lopez))
  406. 2019-02-05 23:03:56 ★ Mariana Lopez uses the screwdriver to undo the screw on each corner of the ECU mounting brackets.
  407. 2019-02-05 23:04:12 ★ Mariana Lopez takes off the old ECU and gets the new one that came with the LS engine, putting it in place
  408. 2019-02-05 23:05:09 ★ Mariana Lopez reconnects the two wire connectors from the engine and such before screwing it
  409. 2019-02-05 23:05:15 ★ in place using a screwdriver ((Mariana Lopez))
  410. 2019-02-05 23:05:56 ★ Mariana Lopez puts the plastic cover back on and secures it using the screws prior to hanging
  411. 2019-02-05 23:06:10 ★ the glove box on the clips that hold it in place. ((Mariana Lopez))
  412. 2019-02-05 23:06:36 ★ Mariana Lopez pops the hood open by pulling on the hood release handle and jumps out as she raises up
  413. 2019-02-05 23:06:47 ★ the hood and supporting it with the hood prop rod. ((Mariana Lopez))
  414. 2019-02-05 23:07:10 ★ Mariana Lopez twists off the oil cap and grabs a bottle of the recommended engine oil, undoing the cap
  415. 2019-02-05 23:07:21 ★ and using a funnel to poor oil into the new engine. ((Mariana Lopez))
  416. 2019-02-05 23:08:10 ★ Mariana Lopez applies the cap back on the engine along with the bottle and shuts the hood as she
  417. 2019-02-05 23:08:17 ★ takes her vehicle out for a quick drive. ((Mariana Lopez))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!