API tools faq
paste
Advertisement
Guest User

Fuel Pump, Injectors, Turbo Kit & Tuning

a guest
May 26th, 2019
112
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 46.64 KB | None | 0 0
raw download clone embed print report
  1. [2019-05-26 17:11:27] [Output] : ★ Jeffrey Cook slips a pair of gloves into their hands, then moves his rolling toolcart towards the rear of
  2. [2019-05-26 17:11:28] [Output] : ★ -the skyline. ((Jeffrey Cook))
  3. [2019-05-26 17:11:54] [Output] : ★ Jeffrey Cook withdraws the skyline's key from his pocket, then inserts it into the key hole, rotating it-
  4. [2019-05-26 17:11:58] [Output] : ★ towards the right as he'd swing the trunk open. ((Jeffrey Cook))
  5. [2019-05-26 17:12:10] [Output] : ★ Jeffrey Cook walks towards his toolbench where a small package would be located.
  6. [2019-05-26 17:12:19] [Output] : ★ Jeffrey Cook grabs the package then walks towards the rear of the skyline.
  7. [2019-05-26 17:12:43] [Output] : ★ Jeffrey Cook rests the package on the toolcart, then begins to pop off various clips-
  8. [2019-05-26 17:12:56] [Output] : ★ holding the trunk carpet's in place. ((Jeffrey Cook))
  9. [2019-05-26 17:13:15] [Output] : ★ Jeffrey Cook takes out the carpet'ing as he'd walk towards the toolbench, placing it on the gruond.
  10. [2019-05-26 17:13:22] [Output] : ★ Jeffrey Cook walks towards the driver door of the R32, opening it as he'd sit inside.
  11. [2019-05-26 17:13:32] [Output] : ★ Jeffrey Cook grabs the hood release lever, then walks out as he'd grab the hood latch-
  12. [2019-05-26 17:13:36] [Output] : ★ allowing the hood to swing upwards. ((Jeffrey Cook))
  13. [2019-05-26 17:13:45] [Output] : ★ Jeffrey Cook walks towards his rolling toolcart, popping it open as he'd take out a 10mm wrench.
  14. [2019-05-26 17:13:55] [Output] : ★ Jeffrey Cook walks towards the engine bay, then extends his arm out towards the positive-
  15. [2019-05-26 17:14:05] [Output] : ★ terminal on the battery, using the ratchet to loosen it up and take it off. ((Jeffrey Cook))
  16. [2019-05-26 17:14:47] [Output] : ★ Jeffrey Cook walks towards the trunk, then grabs a 1/4 ratchet and a 10mm socket frmo his toolcart.
  17. [2019-05-26 17:15:04] [Output] : ★ Jeffrey Cook mounts the 10mm socket to the 1/4 ratchet, then proceeds to undo all 4 10mm bolts holding-
  18. [2019-05-26 17:15:09] [Output] : ★ the fuel pump cover in place. ((Jeffrey Cook))
  19. [2019-05-26 17:15:19] [Output] : ★ Jeffrey Cook takes them off then rests them aside.
  20. [2019-05-26 17:15:35] [Output] : ★ Jeffrey Cook lifts up the fuel pump cover plate as he'd place it aside.
  21. [2019-05-26 17:16:56] [Output] : ★ there'd be a blue plug attached to the metal cover plate. ((Jeffrey Cook))
  22. [2019-05-26 17:20:26] [Output] : ★ Jeffrey Cook extends his arm out towards the blue plug, pressing down against it as he'd disconnect it.
  23. [2019-05-26 17:20:44] [Output] : ★ after lifting up the cover plate, you'd notice a metal lid, being held in by 6 8mm bolts- ((Jeffrey Cook))
  24. [2019-05-26 17:20:54] [Output] : ★ -that also has 2 metal tubes connected to it with hoses. ((Jeffrey Cook))
  25. [2019-05-26 17:21:11] [Output] : ★ Jeffrey Cook takes off the 10mm socket on his 1/4 ratchet, then takes out an 8mm as he'd mount it-
  26. [2019-05-26 17:21:13] [Output] : ★ on instead. ((Jeffrey Cook))
  27. [2019-05-26 17:21:27] [Output] : ★ Jeffrey Cook extends his arm out towards the 6 8mm bolts as he'd undo all of them, taking them off-
  28. [2019-05-26 17:21:30] [Output] : ★ and resting them on the toolcart. ((Jeffrey Cook))
  29. [2019-05-26 17:21:52] [Output] : ★ Jeffrey Cook places his 1/4 ratchet back into the toolcart, then takes out a phillips screwdriver-
  30. [2019-05-26 17:22:05] [Output] : ★ using it to loosen up the hose clamps on both hoses connected to the metal tubes. ((Jeffrey Cook))
  31. [2019-05-26 17:22:20] [Output] : ★ Jeffrey Cook places the screwdriver back into it's correct place, then wraps his fingers around the-
  32. [2019-05-26 17:22:27] [Output] : ★ first hose, wiggling it out. ((Jeffrey Cook))
  33. [2019-05-26 17:22:36] [Output] : ★ Jeffrey Cook moves his fingers towards the second hose, wiggling it out aswell.
  34. [2019-05-26 17:23:06] [Output] : ★ Jeffrey Cook places his right hand on the metal lid, then begins to lift it up as he'd be rotating-
  35. [2019-05-26 17:23:09] [Output] : ★ it in order to take it out. ((Jeffrey Cook))
  36. [2019-05-26 17:24:36] [Output] : ★ Jeffrey Cook grabs the screwdriver out of the toolcart once again, using it to loosen up the hose clamp-
  37. [2019-05-26 17:24:41] [Output] : ★ holding the hose connected to the fuel pump. ((Jeffrey Cook))
  38. [2019-05-26 17:26:11] [Output] : ★ there'd be a hose connected to the metal lid and to the fuel pump, and a wiring- ((Jeffrey Cook))
  39. [2019-05-26 17:26:15] [Output] : ★ plug behind the hose. ((Jeffrey Cook))
  40. [2019-05-26 17:26:35] [Output] : ★ Jeffrey Cook grabs his screwdriver, using it to loosen up the hose clamps on the hose.
  41. [2019-05-26 17:26:46] [Output] : ★ Jeffrey Cook places his hands on the hose as he'd begin to pull and wiggle on it in attempt to-
  42. [2019-05-26 17:26:48] [Output] : ★ take it out. ((Jeffrey Cook))
  43. [2019-05-26 17:27:00] [Output] : ★ Jeffrey Cook takes it out and sets it aside, then extends his arm out towards the wiring plug-
  44. [2019-05-26 17:27:08] [Output] : ★ unplugging it from the fuel pump. ((Jeffrey Cook))
  45. [2019-05-26 17:28:12] [Output] : ★ the only thing that'd still be holding the fuel pump would be a rubber piece- ((Jeffrey Cook))
  46. [2019-05-26 17:28:13] [Output] : ★ ontop of it. ((Jeffrey Cook))
  47. [2019-05-26 17:28:24] [Output] : ★ Jeffrey Cook takes off the rubber piece as he'd set it aside, then places his hands on the fuel pump-
  48. [2019-05-26 17:28:32] [Output] : ★ itself, wiggling and pulling on it in attemp to free it from the assembly. ((Jeffrey Cook))
  49. [2019-05-26 17:28:45] [Output] : ★ Jeffrey Cook grabs the small package he'd have previously left on the toolcart, opening it to reveal-
  50. [2019-05-26 17:29:10] [Output] : ★ a new fuel pump, rubber hose and an oil strainer. ((Jeffrey Cook))
  51. [2019-05-26 17:30:11] [Output] : ★ Jeffrey Cook grabs the rubber hose, 2 hose clamps and the fuel pump.
  52. [2019-05-26 17:30:21] [Output] : ★ Jeffrey Cook connects the rubber hose to the fuel pump, then puts 2 hose clamps over it.
  53. [2019-05-26 17:30:41] [Output] : ★ Jeffrey Cook grabs the screwdriver, using it to tighten up the hose clamp on the lower part of the-
  54. [2019-05-26 17:30:42] [Output] : ★ hose. ((Jeffrey Cook))
  55. [2019-05-26 17:31:25] [Output] : ★ Jeffrey Cook grabs the oil strainer and the locking clip. He then wiggles the oil strainer into the fuel-
  56. [2019-05-26 17:31:35] [Output] : ★ pump and puts the locking clip on, pushing it all the way in. ((Jeffrey Cook))
  57. [2019-05-26 17:32:26] [Output] : ★ Jeffrey Cook grabs the metal lid, then grabs the fuel pump, as he'd begin to align the rubber hose up-
  58. [2019-05-26 17:32:31] [Output] : ★ with the lid, before wiggle it in. ((Jeffrey Cook))
  59. [2019-05-26 17:32:46] [Output] : ★ Jeffrey Cook uses the screwdriver to tighten up the hose clamp on the upper part of the hose, then-
  60. [2019-05-26 17:33:01] [Output] : ★ grabs the rubber piece he'd have set aside as he'd insert it back into it's correct place-] ((Jeffrey Cook))
  61. [2019-05-26 17:33:04] [Output] : ★ on the fuel pump. ((Jeffrey Cook))
  62. [2019-05-26 17:33:22] [Output] : ★ Jeffrey Cook plugs the wiring clips back into the new fuel pump, then grabs the metal lid as he'd-
  63. [2019-05-26 17:33:33] [Output] : ★ lower it back into it's place on an angle so that it fits. ((Jeffrey Cook))
  64. [2019-05-26 17:33:47] [Output] : ★ Jeffrey Cook grabs the 6 8mm nuts as he'd insert each back into it's correct place on the metal lid.
  65. [2019-05-26 17:34:11] [Output] : ★ Jeffrey Cook grabs the 2 hoses he'd have disconnected from the metal tubes earlier, then inserts each-
  66. [2019-05-26 17:34:14] [Output] : ★ back into it's metal tube. ((Jeffrey Cook))
  67. [2019-05-26 17:34:26] [Output] : ★ Jeffrey Cook grabs the screwdriver as he'd use it to tighten up the hose clamps on -
  68. [2019-05-26 17:34:29] [Output] : ★ both hoses. ((Jeffrey Cook))
  69. [2019-05-26 17:34:47] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet that'd have an 8mm socket on, as he'd begin to tighten up each-
  70. [2019-05-26 17:35:00] [Output] : ★ 8mm bolt. ((Jeffrey Cook))
  71. [2019-05-26 17:35:33] [Output] : ★ Jeffrey Cook grabs the fuel pump cover plate as he'd put it back into it's place, then grabs the blue-
  72. [2019-05-26 17:35:38] [Output] : ★ plug as he'd plug it back into it's place. ((Jeffrey Cook))
  73. [2019-05-26 17:35:52] [Output] : ★ Jeffrey Cook grabs the 4 10mm bolts, as he'd insert each back into it's place.
  74. [2019-05-26 17:36:06] [Output] : ★ Jeffrey Cook takes off the 8mm socket on his ratchet, then mounts the 10mm one on it as he'd begin-
  75. [2019-05-26 17:36:12] [Output] : ★ to tighten up all 4 of the 10mm bolts. ((Jeffrey Cook))
  76. [2019-05-26 17:36:30] [Output] : ★ Jeffrey Cook grabs the old fuel pump as he'd walk towards the trash can, throwing it in.
  77. [2019-05-26 17:36:44] [Output] : ★ Jeffrey Cook walks towards the toolbench, grabbing the trunk carpet'ing piece as he'd walk-
  78. [2019-05-26 17:36:47] [Output] : ★ towards the trunk. ((Jeffrey Cook))
  79. [2019-05-26 17:37:33] [Output] : ★ Jeffrey Cook lowers the carpet'ing back into it's place as he'd align it up, then grabs various clips-
  80. [2019-05-26 17:37:40] [Output] : ★ as he'd put them back in place. ((Jeffrey Cook))
  81. [2019-05-26 17:37:52] [Output] : ★ Jeffrey Cook grabs all of his previously used tools, placing them back into the toolcart.
  82. [2019-05-26 17:38:01] [Output] : ★ Jeffrey Cook closes the trunk then moves the toolcart towards-
  83. [2019-05-26 17:38:05] [Output] : ★ the front of the car. ((Jeffrey Cook))
  84. [2019-05-26 17:38:42] [Output] : ★ Jeffrey Cook takes out a phillips screwdriver from the toolcart, using it to loosen up the 6 screws-
  85. [2019-05-26 17:38:56] [Output] : ★ located on the engine bay holding the front bumper to the car. ((Jeffrey Cook))
  86. [2019-05-26 17:39:05] [Output] : ★ Jeffrey Cook takes them off then places them on the toolcart as he'd walk towards the driver side-
  87. [2019-05-26 17:39:09] [Output] : ★ front fender. ((Jeffrey Cook))
  88. [2019-05-26 17:39:22] [Output] : ★ Jeffrey Cook kneels down as he'd stick his head behind the wheel well, then loosens up the 2 screws-
  89. [2019-05-26 17:39:35] [Output] : ★ holding the front bumper, taking them off and placing them on the toolcart. ((Jeffrey Cook))
  90. [2019-05-26 17:39:47] [Output] : ★ Jeffrey Cook walks towards the passenger side fender, loosening up the 2 screws holding the front bumper-
  91. [2019-05-26 17:39:57] [Output] : ★ in place as he'd take them off, placing them on the toolcart. ((Jeffrey Cook))
  92. [2019-05-26 17:40:15] [Output] : ★ Jeffrey Cook places the screwdriver back into it's correct place on the toolcart, then puts both of-
  93. [2019-05-26 17:40:27] [Output] : ★ his hands on the bumper, taking it off the car. ((Jeffrey Cook))
  94. [2019-05-26 17:40:38] [Output] : ★ Jeffrey Cook walks towards the toolbench, placing the front bumper down next to it.
  95. [2019-05-26 17:41:24] [Output] : ★ Jeffrey Cook walks back towards the front of the skyline, then pops open a drawer in his toolcart-
  96. [2019-05-26 17:41:30] [Output] : ★ taking out a 1/4 ratchet and a 10mm socket. ((Jeffrey Cook))
  97. [2019-05-26 17:41:50] [Output] : ★ Jeffrey Cook puts the 10mm socket on the 1/4 ratchet, then extends his arm out towards-
  98. [2019-05-26 17:42:12] [Output] : ★ the charge pipe, loosening up the clamp holding it to the intake. ((Jeffrey Cook))
  99. [2019-05-26 17:42:33] [Output] : ★ Jeffrey Cook then uses the 1/4 ratchet to undo both 10mm bolts holding the charge pipe to the bracket-
  100. [2019-05-26 17:42:39] [Output] : ★ located on the engine. ((Jeffrey Cook))
  101. [2019-05-26 17:43:30] [Output] : ★ Jeffrey Cook takes off the bolts then rests them on the toolcart.
  102. [2019-05-26 17:43:56] [Output] : ★ Jeffrey Cook extends his arm out back towards the charge pipe, before he'd loosen up the clamp-
  103. [2019-05-26 17:44:01] [Output] : ★ holding it to the intercooler piping. ((Jeffrey Cook))
  104. [2019-05-26 17:44:22] [Output] : ★ Jeffrey Cook kneels down, then begins to loosen up the clamp holding the middle part of the intercooler-
  105. [2019-05-26 17:44:39] [Output] : ★ piping to the pipe connected to the intercooler. ((Jeffrey Cook))
  106. [2019-05-26 17:45:00] [Output] : ★ Jeffrey Cook places the 1/4 ratchet in his pocket, then extends his arm out towards-
  107. [2019-05-26 17:45:13] [Output] : ★ the blow off valve, disconnecting the vacuum line from it. ((Jeffrey Cook))
  108. [2019-05-26 17:45:34] [Output] : ★ Jeffrey Cook places both of his hands on the charge pipe as he'd begin to wiggle and pull on it in-
  109. [2019-05-26 17:45:38] [Output] : ★ attempt to free it from the engine. ((Jeffrey Cook))
  110. [2019-05-26 17:45:50] [Output] : ★ Jeffrey Cook succeeds in doing so, then takes the pipe off as he'd walk towards the toolbench, placing-
  111. [2019-05-26 17:45:51] [Output] : ★ it down. ((Jeffrey Cook))
  112. [2019-05-26 17:46:12] [Output] : ★ Jeffrey Cook walks towards the engine bay of the R32, then places his hands on the middle part of the-
  113. [2019-05-26 17:46:31] [Output] : ★ intercooler piping, wiggling it off the other pipe, then walks towards the toolbench- ((Jeffrey Cook))
  114. [2019-05-26 17:46:36] [Output] : ★ as he'd place it down next to the charge pipe. ((Jeffrey Cook))
  115. [2019-05-26 17:46:47] [Output] : ★ Jeffrey Cook makes his way back towards the engine bay of the R32, then kneels down to place-
  116. [2019-05-26 17:46:58] [Output] : ★ his hands on the intercooler pipe that connects to the intercooler, wiggling it off- ((Jeffrey Cook))
  117. [2019-05-26 17:47:00] [Output] : ★ of the intercooler. ((Jeffrey Cook))
  118. [2019-05-26 17:47:13] [Output] : ★ Jeffrey Cook walks back towards the toolbench, placing the pipe down on it along with the other ones.
  119. [2019-05-26 17:48:08] [Output] : ★ Jeffrey Cook walks back towards the engine bay of the R32, as he'd grab his 1/4 ratchet out of his pocket
  120. [2019-05-26 17:48:21] [Output] : ★ Jeffrey Cook takes off the 10mm socket on his ratchet, then takes out a 14mm socket from the toolcart-
  121. [2019-05-26 17:48:24] [Output] : ★ as he'd mount it on instead. ((Jeffrey Cook))
  122. [2019-05-26 17:49:33] [Output] : ★ Jeffrey Cook extends his arm out towards the exhaust manifold, as he'd begin to undo each one of the-
  123. [2019-05-26 17:49:56] [Output] : ★ 12 14mm nuts holding the manifold to the head. ((Jeffrey Cook))
  124. [2019-05-26 17:50:02] [Output] : ★ Jeffrey Cook takes off the nuts then rests them on the toolcart.
  125. [2019-05-26 17:50:19] [Output] : ★ Jeffrey Cook presses the green button on the lift controls, lifting the R32 above head level.
  126. [2019-05-26 17:50:36] [Output] : ★ Jeffrey Cook appoints his attention to the downpipe, then extends his arm out towards-
  127. [2019-05-26 17:50:51] [Output] : ★ the 2 14mm bolts holding the downpipe to the rest of the exhaust system- ((Jeffrey Cook))
  128. [2019-05-26 17:50:56] [Output] : ★ loosening them up before taking them off. ((Jeffrey Cook))
  129. [2019-05-26 17:51:08] [Output] : ★ Jeffrey Cook rests the 2 bolts on the toolcart along with the other ones.
  130. [2019-05-26 17:51:22] [Output] : ★ Jeffrey Cook places the ratchet back into his pocket, then extends his arm out towards-
  131. [2019-05-26 17:51:37] [Output] : ★ the turbo oil drain line, unscrewing it off of the turbo and letting it hang. ((Jeffrey Cook))
  132. [2019-05-26 17:51:55] [Output] : ★ Jeffrey Cook presses the red button on the lift controls, lowering the R32 back down.
  133. [2019-05-26 17:52:39] [Output] : ★ Jeffrey Cook appoints his attention to the wastegate's vacuum line and the oil feed line.
  134. [2019-05-26 17:52:52] [Output] : ★ Jeffrey Cook extends his arm out towards the oil feed line, disconnecting it from the turbo then places-
  135. [2019-05-26 17:53:02] [Output] : ★ his hands on the vacuum line connected to the wastegate, disconnecting it aswell. ((Jeffrey Cook))
  136. [2019-05-26 17:53:33] [Output] : ★ Jeffrey Cook withdraws the 1/4 ratchet from his pockets, extends his arm out towards-
  137. [2019-05-26 17:53:58] [Output] : ★ the clamp holding the air filter to the turbo, loosening it up. ((Jeffrey Cook))
  138. [2019-05-26 17:54:07] [Output] : ★ Jeffrey Cook takes off the air filter, then walks towards the toolbench as he'd place it down.
  139. [2019-05-26 17:54:20] [Output] : ★ Jeffrey Cook walks back towards the R32, then presses a green button on the lift, lifting it above-
  140. [2019-05-26 17:54:22] [Output] : ★ head level. ((Jeffrey Cook))
  141. [2019-05-26 17:54:32] [Output] : ★ Jeffrey Cook extends his arm out towards the coldside of the turbo.
  142. [2019-05-26 17:54:47] [Output] : ★ Jeffrey Cook loosens up the clamp holding the intercooler pipe to the turbo, then moves his hands towards
  143. [2019-05-26 17:55:14] [Output] : ★ -the other clamp, holding the middle intercooler pipe to the one connected to the turbo- ((Jeffrey Cook))
  144. [2019-05-26 17:55:18] [Output] : ★ as he'd loosen it up aswell. ((Jeffrey Cook))
  145. [2019-05-26 17:55:39] [Output] : ★ Jeffrey Cook moves his hand towards the clamp holding the middle intercooler to the pipe connected-
  146. [2019-05-26 17:55:44] [Output] : ★ the intercooler, loosening it up. ((Jeffrey Cook))
  147. [2019-05-26 17:56:08] [Output] : ★ Jeffrey Cook then loosens up the clamp holding the intercooler pipe to the intercooler itself.
  148. [2019-05-26 17:56:25] [Output] : ★ Jeffrey Cook places the 1/4 ratchet into his pocket, then places his hands on the middle intercooler pipe
  149. [2019-05-26 17:56:32] [Output] : ★ -wiggling it out of place as he'd place it down on the ground. ((Jeffrey Cook))
  150. [2019-05-26 17:56:43] [Output] : ★ Jeffrey Cook places his hand on the intercooler pipe connected to the turbo, wiggling it out of place-
  151. [2019-05-26 17:56:50] [Output] : ★ as he'd place it down on the ground along with the other one. ((Jeffrey Cook))
  152. [2019-05-26 17:57:04] [Output] : ★ Jeffrey Cook then finally places his hands on the remaining intercooler pipe, wiggling it out of place-
  153. [2019-05-26 17:57:08] [Output] : ★ as he'd place it down on the ground. ((Jeffrey Cook))
  154. [2019-05-26 17:57:22] [Output] : ★ Jeffrey Cook grabs all 3 intercooler pipes on the ground, then walks towards the toolbench as he'd place-
  155. [2019-05-26 17:57:23] [Output] : ★ them down. ((Jeffrey Cook))
  156. [2019-05-26 17:57:42] [Output] : ★ Jeffrey Cook walks back towards the front of the R32. He then takes off the 14mm socket on his ratchet.
  157. [2019-05-26 17:58:21] [Output] : ★ Jeffrey Cook places the 14mm socket back into the toolcart as he'd take out a 16mm one.
  158. [2019-05-26 17:58:30] [Output] : ★ Jeffrey Cook mounts the 16mm socket to the ratchet then extends his arm out towards-
  159. [2019-05-26 17:58:42] [Output] : ★ the 2 16mm nuts holding the intercooler to the front of the car, loosening them up as he'd- ((Jeffrey Cook))
  160. [2019-05-26 17:58:48] [Output] : ★ them off, placing them on the toolcart. ((Jeffrey Cook))
  161. [2019-05-26 17:59:12] [Output] : ★ Jeffrey Cook puts the ratchet back into his pocket, then places his hands on the intercooler,-
  162. [2019-05-26 17:59:26] [Output] : ★ lifting it up and off of the car, then walks towards the toolbench as he'd place it down. ((Jeffrey Cook))
  163. [2019-05-26 17:59:44] [Output] : ★ Jeffrey Cook makes his way back towards the underside of the R32, then places his hands on the exhaust-
  164. [2019-05-26 17:59:49] [Output] : ★ manifold. ((Jeffrey Cook))
  165. [2019-05-26 18:00:03] [Output] : ★ Jeffrey Cook moves the exhaust manifold backwards, allowing the whole assembly to come out from-
  166. [2019-05-26 18:00:05] [Output] : ★ the bottom of the car. ((Jeffrey Cook))
  167. [2019-05-26 18:00:23] [Output] : ★ Jeffrey Cook walks towards the toolbench as he'd place the aforementioned assembly down next to it.
  168. [2019-05-26 18:02:16] [Output] : ★ Jeffrey Cook walks back towards the front of the R32, then grabs his ratchet as he'd take off the 16mm-
  169. [2019-05-26 18:02:18] [Output] : ★ socket on it. ((Jeffrey Cook))
  170. [2019-05-26 18:02:28] [Output] : ★ Jeffrey Cook places the socket back into the toolcart then takes out the 14mm one as he'd mount it on.
  171. [2019-05-26 18:02:40] [Output] : ★ Jeffrey Cook presses the red button on the lift, lowering the car back down.
  172. [2019-05-26 18:03:51] [Output] : ★ Jeffrey Cook extends his arm out towards the 11 14mm nuts bolts holding the plenum to the intake-
  173. [2019-05-26 18:04:03] [Output] : ★ manifold, proceeding to undo each one of them. ((Jeffrey Cook))
  174. [2019-05-26 18:04:12] [Output] : ★ Jeffrey Cook takes them off and rests them on the toolcart once he'd finish doing so.
  175. [2019-05-26 18:04:32] [Output] : ★ Jeffrey Cook takes off the 14mm socket on the ratchet, then places it back into the toolcart as he'd-
  176. [2019-05-26 18:04:38] [Output] : ★ take out a 10mm one, mounting it on instead. ((Jeffrey Cook))
  177. [2019-05-26 18:05:13] [Output] : ★ Jeffrey Cook places his unoccupied hand on the plenum, then moves it backwards allowing more-
  178. [2019-05-26 18:05:16] [Output] : ★ access to the fuel rail. ((Jeffrey Cook))
  179. [2019-05-26 18:05:33] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet then extends his arm out towards the 2 10mm bolts holding the-
  180. [2019-05-26 18:05:42] [Output] : ★ the fuel rail to the intake manifold, loosening them up. ((Jeffrey Cook))
  181. [2019-05-26 18:05:52] [Output] : ★ Jeffrey Cook takes off the 2 bolts and rests them on the toolcart, then walks towards the toolbench-
  182. [2019-05-26 18:05:57] [Output] : ★ as he'd grab a towel. ((Jeffrey Cook))
  183. [2019-05-26 18:06:10] [Output] : ★ Jeffrey Cook walks back towards the engine bay of the R32 as he'd put the ratchet into his pocket.
  184. [2019-05-26 18:06:33] [Output] : ★ Jeffrey Cook places his right hand on the fuel rail, and uses his left hand to put the towel directly-
  185. [2019-05-26 18:06:36] [Output] : ★ under of the fuel rail. ((Jeffrey Cook))
  186. [2019-05-26 18:06:53] [Output] : ★ Jeffrey Cook lifts the fuel rail upwards using his right hand, in attempt to free it from the engine.
  187. [2019-05-26 18:07:06] [Output] : ★ Jeffrey Cook succeeds in doing so, then rests it ontop of the towel with the injectors facing upwards.
  188. [2019-05-26 18:07:37] [Output] : ★ Jeffrey Cook extends his arm out towards the wiring plugs on the injectors as he'd go over them-
  189. [2019-05-26 18:07:41] [Output] : ★ unplugging each one. ((Jeffrey Cook))
  190. [2019-05-26 18:08:02] [Output] : ★ Jeffrey Cook extends his arm out towards the first injector, wiggling it out of place, and placing it on-
  191. [2019-05-26 18:08:05] [Output] : ★ the toolcart. ((Jeffrey Cook))
  192. [2019-05-26 18:08:23] [Output] : ★ Jeffrey Cook goes over all 5 of the remaining injectors, taking them out as he'd place them on the toolca
  193. [2019-05-26 18:08:25] [Output] : ★ -cart. ((Jeffrey Cook))
  194. [2019-05-26 18:08:38] [Output] : ★ as Jeffrey takes off the injectors you'd notice a bit of fuel come out of the fuel rail- ((Jeffrey Cook))
  195. [2019-05-26 18:08:44] [Output] : ★ and drops down on the towel. ((Jeffrey Cook))
  196. [2019-05-26 18:09:08] [Output] : ★ Jeffrey Cook grabs all 6 injectors from the toolcart, then walks towards the toolbench as he'd-
  197. [2019-05-26 18:09:10] [Output] : ★ place them down. ((Jeffrey Cook))
  198. [2019-05-26 18:09:21] [Output] : ★ Jeffrey Cook reaches over to grab a small package located on the toolbench, opening it up to-
  199. [2019-05-26 18:09:30] [Output] : ★ -reveal 6 new injectors wrapped around in bubble wrap. ((Jeffrey Cook))
  200. [2019-05-26 18:09:47] [Output] : ★ Jeffrey Cook begins to unwrap each one of the 6 new injectors, then places them down.
  201. [2019-05-26 18:10:29] [Output] : ★ Jeffrey Cook grabs all 6 new injectors then walks towards the engine bay of the R32.
  202. [2019-05-26 18:10:43] [Output] : ★ Jeffrey Cook extends his arm out towards the fuel rail whilst holding the injectors as he'd wiggle-
  203. [2019-05-26 18:11:01] [Output] : ★ all 6 of them back on their correct places on the fuel rail. ((Jeffrey Cook))
  204. [2019-05-26 18:11:28] [Output] : ★ Jeffrey Cook goes over all 6 wiring plugs as he'd plug each one into it's injector.
  205. [2019-05-26 18:12:02] [Output] : ★ Jeffrey Cook grabs the fuel rail, then begins to align it back up with the bolt holes, whilst aligning-
  206. [2019-05-26 18:12:05] [Output] : ★ the injectors up with the engine. ((Jeffrey Cook))
  207. [2019-05-26 18:12:15] [Output] : ★ Jeffrey Cook reaches over to grab the 2 10mm bolts on the toolcart, then inserts them back on-
  208. [2019-05-26 18:12:22] [Output] : ★ the fuel rail, hand tightening them enough to be held in place. ((Jeffrey Cook))
  209. [2019-05-26 18:12:34] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet out of his pocket, using it to tighten up both 10mm bolts.
  210. [2019-05-26 18:12:59] [Output] : ★ Jeffrey Cook grabs the plenum as he'd begin to align it up with the bolt holes.
  211. [2019-05-26 18:13:18] [Output] : ★ Jeffrey Cook reaches over towards the toolcart, grabbing the 11 14mm bolts as he'd insert each-
  212. [2019-05-26 18:13:25] [Output] : ★ back into it's correct place on the plenum. ((Jeffrey Cook))
  213. [2019-05-26 18:13:40] [Output] : ★ Jeffrey Cook takes off the 10mm socket on his ratchet, then places it back into the toolcart as he'd take
  214. [2019-05-26 18:13:48] [Output] : ★ -out a 14mm socket, mounting it on instead. ((Jeffrey Cook))
  215. [2019-05-26 18:14:01] [Output] : ★ Jeffrey Cook extends his arm out towards the 11 14mm bolts whilst holding the ratchet, tightening up-
  216. [2019-05-26 18:14:04] [Output] : ★ all of them. ((Jeffrey Cook))
  217. [2019-05-26 18:15:11] [Output] : ★ Jeffrey Cook walks towards the toolbench, where 2 large packages would be located.
  218. [2019-05-26 18:15:29] [Output] : ★ Jeffrey Cook opens up the first one, revealing an intercooler, intercooler piping pieces and a blow off-
  219. [2019-05-26 18:15:37] [Output] : ★ valve along with the clamps and the required hardware for the installation. ((Jeffrey Cook))
  220. [2019-05-26 18:16:01] [Output] : ★ Jeffrey Cook grabs the other package, opening it up to reveal an exhaust manifold, turbo, wastegate-
  221. [2019-05-26 18:16:12] [Output] : ★ and the rest of the items included with the turbo kit. ((Jeffrey Cook))
  222. [2019-05-26 18:17:57] [Output] : ★ Jeffrey Cook takes out the exhaust manifold, wastegate and a V-Band.
  223. [2019-05-26 18:18:13] [Output] : ★ Jeffrey Cook puts the V-Band over the exhaust manifold, then puts the wastegate on.
  224. [2019-05-26 18:18:21] [Output] : ★ Jeffrey Cook takes out his 1/4 ratchet from his pocket, using it to tighten up the V-Band.
  225. [2019-05-26 18:19:08] [Output] : ★ Jeffrey Cook grabs the turbo, it's gasket and 4 14mm bolts and nuts from the package.
  226. [2019-05-26 18:19:21] [Output] : ★ Jeffrey Cook puts the turbo gasket on it's correct place on the exhaust manifold, then puts the turbo-
  227. [2019-05-26 18:19:33] [Output] : ★ on as he'd insert all 4 bolts on, before putting the nuts over them. ((Jeffrey Cook))
  228. [2019-05-26 18:19:58] [Output] : ★ Jeffrey Cook takes out his 1/4 ratchet from his pocket, using it to tighten up all 4 nuts holding the-
  229. [2019-05-26 18:20:01] [Output] : ★ turbo to the manifold. ((Jeffrey Cook))
  230. [2019-05-26 18:20:59] [Output] : ★ Jeffrey Cook reaches inside of the package as he'd take out the exhaust manifold gasket, and 12-
  231. [2019-05-26 18:21:05] [Output] : ★ 14mm bolts. ((Jeffrey Cook))
  232. [2019-05-26 18:21:17] [Output] : ★ Jeffrey Cook grabs the aforementioned items and the exhaust manifold as he'd head towards the-
  233. [2019-05-26 18:21:20] [Output] : ★ engine bay of the R32. ((Jeffrey Cook))
  234. [2019-05-26 18:22:01] [Output] : ★ Jeffrey Cook extends his unoccupied hand out towards the exhaust manifold studs as he'd take out-
  235. [2019-05-26 18:22:05] [Output] : ★ the old gasket, throwing it away. ((Jeffrey Cook))
  236. [2019-05-26 18:22:15] [Output] : ★ Jeffrey Cook grabs the new gasket in his left hand as he'd extends his arm out towards the studs-
  237. [2019-05-26 18:22:17] [Output] : ★ putting it on. ((Jeffrey Cook))
  238. [2019-05-26 18:22:30] [Output] : ★ Jeffrey Cook grabs the exhaust manifold then lowers it down on the engine whilst aligning it up-
  239. [2019-05-26 18:22:37] [Output] : ★ with the studs, before sliding it in place. ((Jeffrey Cook))
  240. [2019-05-26 18:22:51] [Output] : ★ Jeffrey Cook inserts all 14mm bolts in place, hand tightening them on enough for the manifold to-
  241. [2019-05-26 18:22:54] [Output] : ★ be held in place. ((Jeffrey Cook))
  242. [2019-05-26 18:23:21] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet then goes over each one of the 12 bolts, tighteninig them up snug.
  243. [2019-05-26 18:23:47] [Output] : ★ Jeffrey Cook walks towards the toolbench, grabbing 2 10mm bolts and the restrictor plate and it's gasket-
  244. [2019-05-26 18:23:56] [Output] : ★ from the large package, then walks back to the engine bay of the R32. ((Jeffrey Cook))
  245. [2019-05-26 18:24:08] [Output] : ★ Jeffrey Cook extends his arm out towards the top of the turbo, then puts the restrictor plate's-
  246. [2019-05-26 18:24:21] [Output] : ★ gasket on, before putting the restrictor plate over it. ((Jeffrey Cook))
  247. [2019-05-26 18:24:28] [Output] : ★ Jeffrey Cook inserts the 2 10mm bolts into the restrictor plate, hand tightening them,.
  248. [2019-05-26 18:24:37] [Output] : ★ Jeffrey Cook takes off the 14mm socket on his ratchet, as he'd take out a 10mm one from the toolbench.
  249. [2019-05-26 18:24:49] [Output] : ★ Jeffrey Cook mounts the 10mm socket to the ratchet then extends his arm out towards the-
  250. [2019-05-26 18:24:57] [Output] : ★ restrictor plate, tightening up both 10mm bolts, snug. ((Jeffrey Cook))
  251. [2019-05-26 18:25:16] [Output] : ★ Jeffrey Cook grabs the hanging oil feed line, as he'd wiggle it on the restrictor plate on the turbo.
  252. [2019-05-26 18:25:48] [Output] : ★ Jeffrey Cook presses a button on the lift controls, lifting the R32 above head level.
  253. [2019-05-26 18:26:09] [Output] : ★ Jeffrey Cook extends his arm out towards the oil drain line that'd be hanging, grabbing it as he'd-
  254. [2019-05-26 18:26:24] [Output] : ★ screw it on it's correct place on the turbo. ((Jeffrey Cook))
  255. [2019-05-26 18:26:53] [Output] : ★ Jeffrey Cook walks towards the toolbench, grabbing the large package as he'd take out the downpipe, it's-
  256. [2019-05-26 18:26:58] [Output] : ★ gasket and 5 12mm bolts from it. ((Jeffrey Cook))
  257. [2019-05-26 18:27:12] [Output] : ★ Jeffrey Cook walks back under of the R32, then extends his arm out towards the hotside of the-
  258. [2019-05-26 18:27:22] [Output] : ★ turbo whilst holding the downpipe's gasket, putting it on then putting the downpipe over it. ((Jeffrey Cook))
  259. [2019-05-26 18:27:39] [Output] : ★ Jeffrey Cook grabs the 5 12mm bolts, inserting each into it's correct place on the downpipe, hand tigh-
  260. [2019-05-26 18:27:46] [Output] : ★ tening them enough so that the downpipe is held in place. ((Jeffrey Cook))
  261. [2019-05-26 18:28:00] [Output] : ★ Jeffrey Cook grabs 2 14mm bolts from the toolcart, then places his hands on the downpipe as he'd-
  262. [2019-05-26 18:28:10] [Output] : ★ align it up with the rest of the exhaust system before inserting- ((Jeffrey Cook))
  263. [2019-05-26 18:28:21] [Output] : ★ the bolts in place, hand tightening them half of the way in. ((Jeffrey Cook))
  264. [2019-05-26 18:28:35] [Output] : ★ Jeffrey Cook takes off the 10mm socket on his ratchet, placing it back into the toolcart.
  265. [2019-05-26 18:28:48] [Output] : ★ Jeffrey Cook takes out a 12mm socket from the toolcart, mounting it on the ratchet.
  266. [2019-05-26 18:29:03] [Output] : ★ Jeffrey Cook extends his arm out towards the 5 12mm bolts that'd be holding the downpipe to-
  267. [2019-05-26 18:29:11] [Output] : ★ the turbo, tightening up each one of them, snug. ((Jeffrey Cook))
  268. [2019-05-26 18:29:23] [Output] : ★ Jeffrey Cook takes off the 12mm socket on his ratchet, as he'd place it back into the toolcart.
  269. [2019-05-26 18:29:33] [Output] : ★ Jeffrey Cook takes out a 14mm socket, mounting it on instead.
  270. [2019-05-26 18:29:45] [Output] : ★ Jeffrey Cook extends his arm out towards the 2 14mm bolts holding the downpipe to the exhaust-
  271. [2019-05-26 18:29:49] [Output] : ★ system, tightening them up snug. ((Jeffrey Cook))
  272. [2019-05-26 18:30:09] [Output] : ★ Jeffrey Cook presses the red button on the lift controls, lowering the R32 back down.
  273. [2019-05-26 18:30:18] [Output] : ★ Jeffrey Cook extends his arm out towards the hanging vacuum lines, grabbing it as he'd connect it back on
  274. [2019-05-26 18:30:24] [Output] : ★ -the wastegate. ((Jeffrey Cook))
  275. [2019-05-26 18:30:49] [Output] : ★ Jeffrey Cook walks towards the toolbench, grabbing the large package that contained the turbo system-
  276. [2019-05-26 18:30:52] [Output] : ★ taking out an air filter from it. ((Jeffrey Cook))
  277. [2019-05-26 18:31:09] [Output] : ★ Jeffrey Cook would also grab a clamp as he'd walk back towards the engine bay of the R32.
  278. [2019-05-26 18:31:18] [Output] : ★ Jeffrey Cook extends his arm out towards the coldside of the turbo, putting the clamp on it.
  279. [2019-05-26 18:31:29] [Output] : ★ Jeffrey Cook grabs the air filter as he'd wiggle it into the coldside of the turbo.
  280. [2019-05-26 18:31:45] [Output] : ★ Jeffrey Cook withdraws his 1/4 ratchet as he'd use it to tighten up the clamp holding the filter to-
  281. [2019-05-26 18:31:47] [Output] : ★ the turbo. ((Jeffrey Cook))
  282. [2019-05-26 18:33:10] [Output] : ★ Jeffrey Cook walks towards the toolbench, grabbing the other large package, taking out the-
  283. [2019-05-26 18:33:11] [Output] : ★ intercooler from it. ((Jeffrey Cook))
  284. [2019-05-26 18:33:23] [Output] : ★ Jeffrey Cook walks towards the front of the R32, as he'd kneel down, aligning the intercooler's studs-
  285. [2019-05-26 18:33:30] [Output] : ★ up with the bolt holes on the front of the R32. ((Jeffrey Cook))
  286. [2019-05-26 18:33:54] [Output] : ★ Jeffrey Cook reaches towards his toolcart, grabbing the 2 16mm nuts, inserting them into-
  287. [2019-05-26 18:33:56] [Output] : ★ the studs on the intercooler. ((Jeffrey Cook))
  288. [2019-05-26 18:34:13] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet, taking off the 14mm socket on it, placing it back into the toolcart.
  289. [2019-05-26 18:34:26] [Output] : ★ Jeffrey Cook takes out a 16mm socket from the toolcart, mounting it to the ratchet.
  290. [2019-05-26 18:34:38] [Output] : ★ Jeffrey Cook extends his arm out towards the 2 16mm nuts on the intercooler, tightening them up-
  291. [2019-05-26 18:34:41] [Output] : ★ snug. ((Jeffrey Cook))
  292. [2019-05-26 18:39:01] [Output] : ★ Jeffrey Cook places the ratchet into his pocket, then walks towards the toolbench, as he'd grab-
  293. [2019-05-26 18:39:11] [Output] : ★ the large package, taking out the intercooler piping pieces from it and the silicone- ((Jeffrey Cook))
  294. [2019-05-26 18:39:17] [Output] : ★ couplers along with the clamps. ((Jeffrey Cook))
  295. [2019-05-26 18:39:45] [Output] : ★ Jeffrey Cook would also take out the blow off valve and a V-Band.
  296. [2019-05-26 18:40:03] [Output] : ★ Jeffrey Cook grabs the charge pipe, putting the V-Band on it before putting the blow off valve over it.
  297. [2019-05-26 18:40:23] [Output] : ★ Jeffrey Cook grabs the 1/4 ratchet out of his pocket, using it to tighten up the V-Band.
  298. [2019-05-26 18:40:32] [Output] : ★ Jeffrey Cook grabs all aforementioned items as he walks towards the front of the R32.
  299. [2019-05-26 18:40:46] [Output] : ★ Jeffrey Cook places all the items down on the ground, then grabs the intercooler pipe that'd connect to-
  300. [2019-05-26 18:40:52] [Output] : ★ the intercooler along with a silicone coupler and 2 clamps. ((Jeffrey Cook))
  301. [2019-05-26 18:41:11] [Output] : ★ Jeffrey Cook kneels down as he'd wiggle the silicone coupler into it's correct place on the intercooler-
  302. [2019-05-26 18:41:22] [Output] : ★ putting 2 clamps over it, then grabs the intercooler pipe as he'd wiggle it in all the way. ((Jeffrey Cook))
  303. [2019-05-26 18:41:37] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet, using it to tighten up both clamps.
  304. [2019-05-26 18:41:54] [Output] : ★ Jeffrey Cook grabs another silicone coupler, 2 clamps and the middle intercooler pipe.
  305. [2019-05-26 18:42:15] [Output] : ★ Jeffrey Cook wiggles the silicone coupler on the unoccupied end of the pipe he'd have just put in.
  306. [2019-05-26 18:42:25] [Output] : ★ Jeffrey Cook puts 2 clamps over it, then grabs the middle intercooler pipe as he'd wiggle it in all the w
  307. [2019-05-26 18:42:28] [Output] : ★ -way/. ((Jeffrey Cook))
  308. [2019-05-26 18:42:38] [Output] : ★ Jeffrey Cook takes out his 1/4 ratchet, using it to tighten up both clamps.
  309. [2019-05-26 18:42:56] [Output] : ★ Jeffrey Cook grabs 2 silicone couplers, 4 clamps, and the charge pipe.
  310. [2019-05-26 18:43:10] [Output] : ★ Jeffrey Cook puts the first silicone coupler on the unoccupied end of the middle intercooler pipe.
  311. [2019-05-26 18:43:30] [Output] : ★ Jeffrey Cook then grabs the second coupler, putting it on the intake manifold.
  312. [2019-05-26 18:43:45] [Output] : ★ Jeffrey Cook puts 2 clamps over the second coupler, then puts the remaining 2 over the other coupler.
  313. [2019-05-26 18:44:01] [Output] : ★ Jeffrey Cook grabs the charge pipe as he'd align it up with both couplers, wiggling it in all the way.
  314. [2019-05-26 18:44:12] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet, using it to tighten up all 4 clamps.
  315. [2019-05-26 18:44:29] [Output] : ★ Jeffrey Cook grabs the vacuum line for the blow off valve, connecting it on the new blow off valve.
  316. [2019-05-26 18:45:16] [Output] : ★ there'd be 4 silicone couplers, 3 pipes and 8 clamps remaining on the ground. ((Jeffrey Cook))
  317. [2019-05-26 18:45:27] [Output] : ★ Jeffrey Cook grabs one of the silicone couplers, 2 clamps and the intercooler pipe that'd connect to-
  318. [2019-05-26 18:45:32] [Output] : ★ the intecooler,. ((Jeffrey Cook))
  319. [2019-05-26 18:45:45] [Output] : ★ Jeffrey Cook puts the silicone coupler into the unoccupied end of the intercooler, wiggling it in.
  320. [2019-05-26 18:45:55] [Output] : ★ Jeffrey Cook puts 2 clamps over it then grabs the pipe as he'd align it up with the coupler-
  321. [2019-05-26 18:45:58] [Output] : ★ before wiggling it in. ((Jeffrey Cook))
  322. [2019-05-26 18:46:07] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet, using it to tighten up the 2 clamps.
  323. [2019-05-26 18:46:17] [Output] : ★ Jeffrey Cook places the ratchet back into his pocket, then grabs another silicone coupler, 2 clamps-
  324. [2019-05-26 18:46:22] [Output] : ★ and the middle intercooler pipe. ((Jeffrey Cook))
  325. [2019-05-26 18:46:38] [Output] : ★ Jeffrey Cook puts the silicone coupler on the unoccupied end of the first intercooler pipe that's-
  326. [2019-05-26 18:46:44] [Output] : ★ connected on the intercooler. ((Jeffrey Cook))
  327. [2019-05-26 18:46:50] [Output] : ★ Jeffrey Cook puts 2 clamps over the aforementioned coupler, then grabs the middle intercooler pipe-
  328. [2019-05-26 18:46:53] [Output] : ★ as he'd wiggle it in place. ((Jeffrey Cook))
  329. [2019-05-26 18:47:01] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet, using it to tighten up both clamps.
  330. [2019-05-26 18:47:17] [Output] : ★ Jeffrey Cook grabs the remaining 2 couplers, 4 clamps and the intercooler pipe.
  331. [2019-05-26 18:47:31] [Output] : ★ Jeffrey Cook puts the first coupler on the unoccupied end of the middle intercooler pipe, then puts-
  332. [2019-05-26 18:47:46] [Output] : ★ the second one on it's correct place on the coldside of the turbo. ((Jeffrey Cook))
  333. [2019-05-26 18:47:56] [Output] : ★ Jeffrey Cook puts 2 clamps over the first coupler, then puts the 2 remaining ones over the other coupler.
  334. [2019-05-26 18:48:10] [Output] : ★ Jeffrey Cook grabs the intercooler pipe that'd connect to the turbo, aligning it up with the-
  335. [2019-05-26 18:48:16] [Output] : ★ middle pipe and the turbo, the sliding it in. ((Jeffrey Cook))
  336. [2019-05-26 18:48:23] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet, using it to tighten up all 4 clamps.
  337. [2019-05-26 18:48:44] [Output] : ★ Jeffrey Cook closes the hood, then grabs all of the previously used tools, placing them back-
  338. [2019-05-26 18:48:48] [Output] : ★ into their corrcet places on the toolcart. ((Jeffrey Cook))
  339. [2019-05-26 18:49:01] [Output] : ★ Jeffrey Cook grabs a phillips screwdriver, then walks towards the toolbench, grabbing a package-
  340. [2019-05-26 18:49:10] [Output] : ★ that'd have "haltech" written over it. ((Jeffrey Cook))
  341. [2019-05-26 18:49:23] [Output] : ★ Jeffrey Cook walks towards the passenger door of the R32, opening it as he'd sit inside.
  342. [2019-05-26 18:49:36] [Output] : ★ Jeffrey Cook lifts up the passenger foot well carpet, then grabs his phillips screwdriver as he'd-
  343. [2019-05-26 18:49:43] [Output] : ★ use it to loosen up the 4 screws holding the ECU cover plate in place. ((Jeffrey Cook))
  344. [2019-05-26 18:49:54] [Output] : ★ Jeffrey Cook takes off the screws and places them aside, then lifts up the cover plate, revealing the ECU
  345. [2019-05-26 18:50:08] [Output] : ★ Jeffrey Cook unplugs the the stock ECU from the harness, then takes it off as he'd set it aside.
  346. [2019-05-26 18:50:31] [Output] : ★ Jeffrey Cook takes out the new haltech ECU and the adaptor harness, then extends his arm out towards-
  347. [2019-05-26 18:50:42] [Output] : ★ the stock harness whilst holding the adaptor harness, plugging it in. ((Jeffrey Cook))
  348. [2019-05-26 18:50:51] [Output] : ★ Jeffrey Cook grabs the haltech ECU, then plugs it into the adaptor harness.
  349. [2019-05-26 18:51:09] [Output] : ★ Jeffrey Cook grabs the hood release lever, then walks out as he'd grab the latch, swinging the-
  350. [2019-05-26 18:51:10] [Output] : ★ hood upwards. ((Jeffrey Cook))
  351. [2019-05-26 18:51:26] [Output] : ★ Jeffrey Cook grabs his 1/4 ratchet, then extends his arm out towards the negative battery terminal-
  352. [2019-05-26 18:51:36] [Output] : ★ placing it back into it's place, then tightens it up with the ratchet. ((Jeffrey Cook))
  353. [2019-05-26 18:51:53] [Output] : ★ Jeffrey Cook closes the hood, then walks to the driver door as he'd sit inside, releasing the handbrake.
  354. [2019-05-26 18:52:07] [Output] : ★ Jeffrey Cook pushes the car towards the dyno, aligning all 4 wheels up, then puts the handbrake up.
  355. [2019-05-26 18:52:17] [Output] : ★ Jeffrey Cook walks towards the dyno bench, grabbing his laptop, turning it on.
  356. [2019-05-26 18:52:28] [Output] : ★ Jeffrey Cook turns on the Fans, then turns on the HP reading monitors.
  357. [2019-05-26 18:52:41] [Output] : ★ Jeffrey Cook walks to the driver door of the R32, placing the laptop in the driver seat.
  358. [2019-05-26 18:52:52] [Output] : ★ Jeffrey Cook kneels down, grabbing the front dyno straps, attaching them to the subframe.
  359. [2019-05-26 18:53:01] [Output] : ★ Jeffrey Cook walks towards the back, grabbing the rear straps and attaching them to the-
  360. [2019-05-26 18:53:03] [Output] : ★ frame rails. ((Jeffrey Cook))
  361. [2019-05-26 18:53:25] [Output] : ★ Jeffrey Cook walks back to the driver door of the R32 as he'd sit inside, grabbing his laptop.
  362. [2019-05-26 18:53:36] [Output] : ★ Jeffrey Cook grabs the haltech package, taking out a USB drive and a connector from it.
  363. [2019-05-26 18:53:52] [Output] : ★ Jeffrey Cook puts the USB drive into his computer, then opens up it's contents.
  364. [2019-05-26 18:54:02] [Output] : ★ the USB drive would have a file named "GTSTR32Basemap.exe" ((Jeffrey Cook))
  365. [2019-05-26 18:54:17] [Output] : ★ Jeffrey Cook moves the aforementioned file to the desktop of his laptop, then takes off the USB drive.
  366. [2019-05-26 18:54:24] [Output] : ★ Jeffrey Cook places the USB drive back into the package, then takes out the USB connector.
  367. [2019-05-26 18:54:35] [Output] : ★ Jeffrey Cook connects one of the USB connectors ends to the laptop, then connects the other one-
  368. [2019-05-26 18:54:38] [Output] : ★ to the ECU. ((Jeffrey Cook))
  369. [2019-05-26 18:54:59] [Output] : ★ a window would reading "WinOLS, Loading... Please wait..." would pop up. ((Jeffrey Cook))
  370. [2019-05-26 18:55:17] [Output] : ★ after a few seconds it'd read "ECU Found" with the option "Upload base map" ((Jeffrey Cook))
  371. [2019-05-26 18:55:38] [Output] : ★ Jeffrey Cook presses the "upload base map" option, then selects the "GTSTR32Basemap.exe"-
  372. [2019-05-26 18:55:42] [Output] : ★ file on his desktop, uploading it. ((Jeffrey Cook))
  373. [2019-05-26 18:55:49] [Output] : ★ it'd read "Uploading basemap... Please wait" ((Jeffrey Cook))
  374. [2019-05-26 18:56:03] [Output] : ★ after a bit of time it'd display "Basemap succesfully uploaded!" then it'd show the- ((Jeffrey Cook))
  375. [2019-05-26 18:56:16] [Output] : ★ following options of "Boost By Gear" "Dyno Run" "Fuel Pressure" ((Jeffrey Cook))
  376. [2019-05-26 18:56:31] [Output] : ★ Jeffrey Cook selects the "Dyno Run" tab, then inserts the key into the car, turning it all the-
  377. [2019-05-26 18:56:40] [Output] : ★ the way to the right, in attempt to start it. ((Jeffrey Cook))
  378. [2019-05-26 18:56:49] [Output] : ★ the car would fail to start the first 2 attempts, it'd start on the third. ((Jeffrey Cook))
  379. [2019-05-26 18:57:06] [Output] : ★ Jeffrey Cook selects "New run" then puts the car in first gear as he'd press the gas pedal.
  380. [2019-05-26 18:57:14] [Output] : ★ Jeffrey Cook does a run all the way up to 5th gear, then looks at the monitors.
  381. [2019-05-26 18:57:25] [Output] : ★ the monitors would display a steep HP Curve, around 200 horsepower. ((Jeffrey Cook))
  382. [2019-05-26 18:57:48] [Output] : ★ Jeffrey Cook selects the "Fuel Pressure" tab, then adjusts the fuel pressures to a higher value.
  383. [2019-05-26 18:58:22] [Output] : ★ Jeffrey Cook selects the "Boost by gear" tab then adjusts the boost in 1st gear at 30PSI-
  384. [2019-05-26 18:58:35] [Output] : ★ 32PSI in 2nd, 34PSI in 3rd, 36PSI in 4th, 38PSI in 5th. ((Jeffrey Cook))
  385. [2019-05-26 18:58:51] [Output] : ★ Jeffrey Cook selects the "Dyno run" tab then selects "New Run", as he'd put the car into first gear.
  386. [2019-05-26 18:58:59] [Output] : ★ Jeffrey Cook does a run all the way up to 5th gear, then looks to the monitors.
  387. [2019-05-26 18:59:10] [Output] : ★ it'd display a smoother HP Curve, at 500 horsepower. ((Jeffrey Cook))
  388. [2019-05-26 18:59:21] [Output] : ★ Jeffrey Cook turns off his Laptop, then disconnects it off the ECU as he'd walk out.
  389. [2019-05-26 18:59:32] [Output] : ★ Jeffrey Cook places the laptop back into the dyno bench, then turns off the fans and the monitors.
  390. [2019-05-26 18:59:51] [Output] : ★ Jeffrey Cook grabs a phillips screwdriver from his pocket, then walks to the passenger door of the-
  391. [2019-05-26 18:59:59] [Output] : ★ R32 as he'd sit inside, grabbing the ECU cover plate. ((Jeffrey Cook))
  392. [2019-05-26 19:00:16] [Output] : ★ Jeffrey Cook tucks the ECU in place, then puts the cover plate over it, before inserting 4 screws in plac
  393. [2019-05-26 19:00:17] [Output] : ★ -place. ((Jeffrey Cook))
  394. [2019-05-26 19:00:31] [Output] : ★ Jeffrey Cook uses the phillips screwdriver to tighten up each one of the 4 screws.
  395. [2019-05-26 19:00:44] [Output] : ★ Jeffrey Cook puts the carpetting back on it's place, then grabs the old ECU as he'd walk out.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!