API tools faq
paste
Advertisement
Guest User

NanoPC-T6 OpenWRT serial logs

a guest
Feb 18th, 2025
26
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 61.74 KB | Cybersecurity | 0 0
raw download clone embed print report
  1. DDR V1.09 a930779e06 typ 22/11/21-17:50:56
  2. LPDDR4X, 2112MHz
  3. channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
  4. channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
  5. channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
  6. channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=4096MB
  7. Manufacturer ID:0x1
  8. CH0 RX Vref:31.7%, TX Vref:22.8%,23.8%
  9. CH1 RX Vref:31.7%, TX Vref:21.8%,21.8%
  10. CH2 RX Vref:29.7%, TX Vref:22.8%,22.8%
  11. CH3 RX Vref:30.7%, TX Vref:20.8%,20.8%
  12. change to F1: 528MHz
  13. change to F2: 1068MHz
  14. change to F3: 1560MHz
  15. change to F0: 2112MHz
  16. out
  17. U-Boot SPL board init
  18. U-Boot SPL 2017.09-friendlyelec-rk3588 (Jul 18 2023 - 18:37:19)
  19. Trying to boot from MMC2
  20. MMC: no card present
  21. mmc_init: -123, time 0
  22. spl: mmc init failed with error: -123
  23. Trying to boot from MMC1
  24. part_get_info_efi: *** ERROR: Invalid GPT ***
  25. part_get_info_efi: *** Using Backup GPT ***
  26. spl: partition error
  27. Trying fit image at 0x4000 sector
  28. ## Verified-boot: 0
  29. ## Checking atf-1 0x00040000 ... sha256(a7d1d8d191...) + OK
  30. ## Checking u-boot 0x00a00000 ... sha256(6bb7e18ffe...) + OK
  31. ## Checking fdt-1 0x00ad43e0 ... sha256(9c10d252bd...) + OK
  32. ## Checking atf-2 0x000f0000 ... sha256(aa71013e72...) + OK
  33. ## Checking atf-3 0xff100000 ... sha256(4b2065349b...) + OK
  34. Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
  35. Total: 524.253 ms
  36.  
  37. INFO: Preloader serial: 2
  38. NOTICE: BL31: v2.3():v2.3-682-g4ca8a8422:derrick.huang, fwver: v1.45
  39. NOTICE: BL31: Built : 10:11:21, Dec 27 2023
  40. INFO: spec: 0x1
  41. INFO: code: 0x88
  42. INFO: ext 32k is not valid
  43. INFO: ddr: stride-en 4CH
  44. INFO: GICv3 without legacy support detected.
  45. INFO: ARM GICv3 driver initialized in EL3
  46. INFO: valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
  47. INFO: l3 cache partition cfg-0
  48. INFO: system boots from cpu-hwid-0
  49. INFO: disable memory repair
  50. INFO: idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
  51. ERROR: dfs get fsp_params[0] error, 0xfead0001 != 0xfead0004
  52. ERROR: dfs get fsp_params[1] error, 0xa54 != 0xfead0004
  53. ERROR: dfs get fsp_params[2] error, 0xbc != 0xfead0004
  54. ERROR: dfs get fsp_params[3] error, 0x3f0033 != 0xfead0004
  55. ERROR: loader&trust unmatch!!! Please update loader if need enable dmc
  56. ERROR: current trust bl31 need match with loader ddr bin V1.13 or newer
  57. ERROR: current loader need match with trust bl31 V1.07-V1.37
  58. INFO: BL31: Initialising Exception Handling Framework
  59. INFO: BL31: Initializing runtime services
  60. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE init ialization. SMC`s destined for OPTEE will return SMC_UNK
  61. ERROR: Error initializing runtime service opteed_fast
  62. INFO: BL31: Preparing for EL3 exit to normal world
  63. INFO: Entry point address = 0xa00000
  64. INFO: SPSR = 0x3c9
  65.  
  66.  
  67. U-Boot 2024.10-OpenWrt-r28427-6df0e3d02a (Feb 03 2025 - 23:09:37 +0000)
  68.  
  69. Model: FriendlyElec NanoPC-T6
  70. DRAM: 16 GiB
  71. Core: 342 devices, 30 uclasses, devicetree: separate
  72. MMC: mmc@fe2c0000: 1, mmc@fe2e0000: 0
  73. Loading Environment from nowhere... OK
  74. In: serial@feb50000
  75. Out: serial@feb50000
  76. Err: serial@feb50000
  77. Model: FriendlyElec NanoPC-T6
  78. Net: No ethernet found.
  79. Hit any key to stop autoboot: 0
  80. Scanning for bootflows in all bootdevs
  81. Seq Method State Uclass Part Name Filename
  82. --- ----------- ------ -------- ---- ------------------------ ------------ ----
  83. Scanning global bootmeth 'efi_mgr':
  84. Card did not respond to voltage select! : -110
  85. No EFI system partition
  86. No EFI system partition
  87. Failed to persist EFI variables
  88. No EFI system partition
  89. Failed to persist EFI variables
  90. No EFI system partition
  91. Failed to persist EFI variables
  92. 0 efi_mgr ready (none) 0 <NULL>
  93. ** Booting bootflow '<NULL>' with efi_mgr
  94. Loading Boot0000 'mmc 0' failed
  95. EFI boot manager: Cannot load any image
  96. Boot failed (err=-14)
  97. Scanning bootdev '[email protected]':
  98. Card did not respond to voltage select! : -110
  99. Scanning bootdev '[email protected]':
  100. 1 script ready mmc 1 [email protected] /boot.scr
  101. ** Booting bootflow '[email protected]_1' with script
  102. 4564348 bytes read in 36 ms (120.9 MiB/s)
  103. ## Loading kernel from FIT Image at 02000000 ...
  104. Using 'config-1' configuration
  105. Verifying Hash Integrity ... OK
  106. Trying 'kernel-1' kernel subimage
  107. Description: ARM64 OpenWrt Linux-6.6.73
  108. Type: Kernel Image
  109. Compression: lzma compressed
  110. Data Start: 0x020000e8
  111. Data Size: 4476755 Bytes = 4.3 MiB
  112. Architecture: AArch64
  113. OS: Linux
  114. Load Address: 0x03200000
  115. Entry Point: 0x03200000
  116. Hash algo: crc32
  117. Hash value: 5861435d
  118. Hash algo: sha1
  119. Hash value: ad3055f9142bd507f8e20e35a515b98b048118d2
  120. Verifying Hash Integrity ... crc32+ sha1+ OK
  121. ## Loading fdt from FIT Image at 02000000 ...
  122. Using 'config-1' configuration
  123. Verifying Hash Integrity ... OK
  124. Trying 'fdt-1' fdt subimage
  125. Description: ARM64 OpenWrt friendlyarm_nanopc-t6 device tree blob
  126. Type: Flat Device Tree
  127. Compression: uncompressed
  128. Data Start: 0x02445184
  129. Data Size: 85676 Bytes = 83.7 KiB
  130. Architecture: AArch64
  131. Hash algo: crc32
  132. Hash value: fc00ba25
  133. Hash algo: sha1
  134. Hash value: 14e78011e0a5d50fc4ef0ae9dca787ece243116c
  135. Verifying Hash Integrity ... crc32+ sha1+ OK
  136. Booting using the fdt blob at 0x2445184
  137. Working FDT set to 2445184
  138. Uncompressing Kernel Image to 3200000
  139. Loading Device Tree to 00000000ecb99000, end 00000000ecbb0eab ... OK
  140. Working FDT set to ecb99000
  141.  
  142. Starting kernel ...
  143.  
  144. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  145. [ 0.000000] Linux version 6.6.73 (builder@buildhost) (aarch64-openwrt-linux-m usl-gcc (OpenWrt GCC 13.3.0 r28427-6df0e3d02a) 13.3.0, GNU ld (GNU Binutils) 2.4 2) #0 SMP Mon Feb 3 23:09:37 2025
  146. [ 0.000000] Machine model: FriendlyElec NanoPC-T6
  147. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
  148. [ 0.000000] printk: bootconsole [uart8250] enabled
  149. [ 0.000000] Zone ranges:
  150. [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff]
  151. [ 0.000000] DMA32 empty
  152. [ 0.000000] Normal [mem 0x0000000100000000-0x00000004ffffffff]
  153. [ 0.000000] Movable zone start for each node
  154. [ 0.000000] Early memory node ranges
  155. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff]
  156. [ 0.000000] node 0: [mem 0x0000000100000000-0x00000003fbffffff]
  157. [ 0.000000] node 0: [mem 0x00000003fc500000-0x00000003ffefffff]
  158. [ 0.000000] node 0: [mem 0x00000004f0000000-0x00000004ffffffff]
  159. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000004ffffffff]
  160. [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges
  161. [ 0.000000] On node 0, zone Normal: 1280 pages in unavailable ranges
  162. [ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges
  163. [ 0.000000] cma: Reserved 16 MiB at 0x00000000ef000000 on node -1
  164. [ 0.000000] psci: probing for conduit method from DT.
  165. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  166. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  167. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  168. [ 0.000000] psci: SMC Calling Convention v1.2
  169. [ 0.000000] percpu: Embedded 19 pages/cpu s38120 r8192 d31512 u77824
  170. [ 0.000000] Detected VIPT I-cache on CPU0
  171. [ 0.000000] CPU features: detected: GIC system register CPU interface
  172. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  173. [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 128 6807, 2441009
  174. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  175. [ 0.000000] alternatives: applying boot alternatives
  176. [ 0.000000] Kernel command line: console=ttyS2,1500000 earlycon=uart8250,mmio 32,0xfeb50000 root=PARTUUID=5452574f-02 rw rootwait
  177. [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 byt es, linear)
  178. [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes , linear)
  179. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4126752
  180. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  181. [ 0.000000] software IO TLB: area num 8.
  182. [ 0.000000] software IO TLB: mapped [mem 0x00000000e8b99000-0x00000000ecb9900 0] (64MB)
  183. [ 0.000000] Memory: 16348192K/16769024K available (9792K kernel code, 2448K r wdata, 1888K rodata, 2240K init, 741K bss, 404448K reserved, 16384K cma-reserved )
  184. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  185. [ 0.000000] rcu: Hierarchical RCU implementation.
  186. [ 0.000000] rcu: RCU event tracing is enabled.
  187. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
  188. [ 0.000000] Tracing variant of Tasks RCU enabled.
  189. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies.
  190. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
  191. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  192. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  193. [ 0.000000] GICv3: 480 SPIs implemented
  194. [ 0.000000] GICv3: 0 Extended SPIs implemented
  195. [ 0.000000] GICv3: MBI range [424:479]
  196. [ 0.000000] GICv3: Using MBI frame 0x00000000fe610000
  197. [ 0.000000] Root IRQ handler: 0xffff800080010088
  198. [ 0.000000] GICv3: GICv3 features: 16 PPIs
  199. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  200. [ 0.000000] ITS [mem 0xfe640000-0xfe65ffff]
  201. [ 0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
  202. [ 0.000000] ITS@0x00000000fe640000: allocated 8192 Devices @3fc570000 (indire ct, esz 8, psz 64K, shr 0)
  203. [ 0.000000] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @3f c580000 (flat, esz 2, psz 64K, shr 0)
  204. [ 0.000000] ITS: using cache flushing for cmd queue
  205. [ 0.000000] ITS [mem 0xfe660000-0xfe67ffff]
  206. [ 0.000000] GIC: enabling workaround for ITS: Rockchip erratum RK3588001
  207. [ 0.000000] ITS@0x00000000fe660000: allocated 8192 Devices @3fc5a0000 (indire ct, esz 8, psz 64K, shr 0)
  208. [ 0.000000] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @3f c5b0000 (flat, esz 2, psz 64K, shr 0)
  209. [ 0.000000] ITS: using cache flushing for cmd queue
  210. [ 0.000000] GICv3: using LPI property table @0x00000003fc5c0000
  211. [ 0.000000] GIC: using cache flushing for LPI property table
  212. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000003fc5d000 0
  213. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[ 0] /cpus/cpu@100[1] /cpus/cpu@200[2] /cpus/cpu@300[3] }
  214. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@40 0[4] /cpus/cpu@500[5] /cpus/cpu@600[6] /cpus/cpu@700[7] }
  215. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  216. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  217. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  218. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980 46511097ns
  219. [ 0.001629] Console: colour dummy device 80x25
  220. [ 0.002095] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000)
  221. [ 0.003053] pid_max: default: 32768 minimum: 301
  222. [ 0.008774] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, li near)
  223. [ 0.009519] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 byte s, linear)
  224. [ 0.014720] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adju st=1 rcu_task_cpu_ids=8.
  225. [ 0.015798] rcu: Hierarchical SRCU implementation.
  226. [ 0.016246] rcu: Max phase no-delay instances is 1000.
  227. [ 0.017051] Platform MSI: msi-controller@fe640000 domain created
  228. [ 0.017623] Platform MSI: msi-controller@fe660000 domain created
  229. [ 0.018441] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 d omain created
  230. [ 0.019232] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 d omain created
  231. [ 0.020552] smp: Bringing up secondary CPUs ...
  232. [ 0.021519] Detected VIPT I-cache on CPU1
  233. [ 0.021592] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  234. [ 0.021607] GICv3: CPU1: using allocated LPI pending table @0x00000003fc5e000 0
  235. [ 0.021651] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  236. [ 0.022314] Detected VIPT I-cache on CPU2
  237. [ 0.022381] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  238. [ 0.022395] GICv3: CPU2: using allocated LPI pending table @0x00000003fc5f000 0
  239. [ 0.022438] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  240. [ 0.023048] Detected VIPT I-cache on CPU3
  241. [ 0.023113] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  242. [ 0.023126] GICv3: CPU3: using allocated LPI pending table @0x000000010040000 0
  243. [ 0.023166] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  244. [ 0.023815] CPU features: detected: Spectre-v4
  245. [ 0.023820] CPU features: detected: Spectre-BHB
  246. [ 0.023825] Detected PIPT I-cache on CPU4
  247. [ 0.023865] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  248. [ 0.023874] GICv3: CPU4: using allocated LPI pending table @0x000000010041000 0
  249. [ 0.023900] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
  250. [ 0.024453] Detected PIPT I-cache on CPU5
  251. [ 0.024499] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  252. [ 0.024508] GICv3: CPU5: using allocated LPI pending table @0x000000010042000 0
  253. [ 0.024536] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  254. [ 0.025108] Detected PIPT I-cache on CPU6
  255. [ 0.025153] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  256. [ 0.025162] GICv3: CPU6: using allocated LPI pending table @0x000000010043000 0
  257. [ 0.025190] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  258. [ 0.025760] Detected PIPT I-cache on CPU7
  259. [ 0.025807] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
  260. [ 0.025816] GICv3: CPU7: using allocated LPI pending table @0x000000010044000 0
  261. [ 0.025843] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
  262. [ 0.025920] smp: Brought up 1 node, 8 CPUs
  263. [ 0.043069] SMP: Total of 8 processors activated.
  264. [ 0.043509] CPU features: detected: 32-bit EL0 Support
  265. [ 0.043981] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  266. [ 0.044771] CPU features: detected: Common not Private translations
  267. [ 0.045350] CPU features: detected: CRC32 instructions
  268. [ 0.045829] CPU features: detected: RCpc load-acquire (LDAPR)
  269. [ 0.046362] CPU features: detected: Privileged Access Never
  270. [ 0.046875] CPU features: detected: RAS Extension Support
  271. [ 0.047373] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  272. [ 0.048116] CPU: All CPU(s) started at EL2
  273. [ 0.048498] alternatives: applying system-wide alternatives
  274. [ 0.070019] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
  275. [ 0.070940] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  276. [ 0.072937] pinctrl core: initialized pinctrl subsystem
  277. [ 0.074568] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  278. [ 0.075794] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
  279. [ 0.076752] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic all ocations
  280. [ 0.077642] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic a llocations
  281. [ 0.078728] thermal_sys: Registered thermal governor 'step_wise'
  282. [ 0.078732] thermal_sys: Registered thermal governor 'power_allocator'
  283. [ 0.079303] cpuidle: using governor menu
  284. [ 0.080320] ASID allocator initialised with 65536 entries
  285. [ 0.081145] Serial: AMBA PL011 UART driver
  286. [ 0.091035] /i2c@fec80000/typec-portc@22/connector: Fixed dependency cycle(s) with /usb@fc000000
  287. [ 0.091989] /i2c@fec90000/codec@1b: Fixed dependency cycle(s) with /i2s@fe470 000
  288. [ 0.092964] /i2c@fec80000/typec-portc@22/connector: Fixed dependency cycle(s) with /phy@fed80000
  289. [ 0.093804] /usb@fc000000: Fixed dependency cycle(s) with /phy@fed80000
  290. [ 0.094445] /phy@fed80000: Fixed dependency cycle(s) with /i2c@fec80000/typec -portc@22/connector
  291. [ 0.097351] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
  292. [ 0.098285] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
  293. [ 0.099006] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation.
  294. [ 0.099911] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
  295. [ 0.100623] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation.
  296. [ 0.101527] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
  297. [ 0.102235] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation.
  298. [ 0.103133] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
  299. [ 0.103918] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation.
  300. [ 0.104828] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
  301. [ 0.109098] Modules: 28432 pages in range for non-PLT usage
  302. [ 0.109102] Modules: 519952 pages in range for PLT usage
  303. [ 0.110252] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
  304. [ 0.111373] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
  305. [ 0.111957] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
  306. [ 0.112584] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
  307. [ 0.113166] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
  308. [ 0.113795] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
  309. [ 0.114377] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
  310. [ 0.115012] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
  311. [ 0.116932] cryptd: max_cpu_qlen set to 1000
  312. [ 0.118446] iommu: Default domain type: Passthrough
  313. [ 0.119124] SCSI subsystem initialized
  314. [ 0.119606] usbcore: registered new interface driver usbfs
  315. [ 0.120125] usbcore: registered new interface driver hub
  316. [ 0.120633] usbcore: registered new device driver usb
  317. [ 0.121165] pps_core: LinuxPPS API ver. 1 registered
  318. [ 0.121626] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <[email protected]>
  319. [ 0.122476] PTP clock support registered
  320. [ 0.122983] scmi_core: SCMI protocol bus registered
  321. [ 0.124183] clocksource: Switched to clocksource arch_sys_counter
  322. [ 0.126113] VFS: Disk quotas dquot_6.6.0
  323. [ 0.126632] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  324. [ 0.129532] NET: Registered PF_INET protocol family
  325. [ 0.130284] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, li near)
  326. [ 0.140084] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 1310 72 bytes, linear)
  327. [ 0.141010] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  328. [ 0.141734] TCP established hash table entries: 131072 (order: 8, 1048576 byt es, linear)
  329. [ 0.143457] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, line ar)
  330. [ 0.146032] TCP: Hash tables configured (established 131072 bind 65536)
  331. [ 0.146965] MPTCP token hash table entries: 16384 (order: 6, 393216 bytes, li near)
  332. [ 0.147856] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
  333. [ 0.148836] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear )
  334. [ 0.150125] NET: Registered PF_UNIX/PF_LOCAL protocol family
  335. [ 0.150667] PCI: CLS 0 bytes, default 64
  336. [ 0.151976] workingset: timestamp_bits=46 max_order=22 bucket_order=0
  337. [ 0.157082] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  338. [ 0.157626] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_ PRIORITY) (c) 2001-2006 Red Hat, Inc.
  339. [ 0.161557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 48)
  340. [ 0.162345] io scheduler mq-deadline registered
  341. [ 0.171420] rockchip-dw-pcie a40c00000.pcie: host bridge /pcie@fe180000 range s:
  342. [ 0.172113] rockchip-dw-pcie a40c00000.pcie: IO 0x00f3100000..0x00f31ff fff -> 0x00f3100000
  343. [ 0.172935] rockchip-dw-pcie a40c00000.pcie: MEM 0x00f3200000..0x00f3fff fff -> 0x00f3200000
  344. [ 0.173759] rockchip-dw-pcie a40c00000.pcie: MEM 0x09c0000000..0x09fffff fff -> 0x0040000000
  345. [ 0.174681] rockchip-dw-pcie a40c00000.pcie: iATU: unroll T, 8 ob, 8 ib, alig n 64K, limit 8G
  346. [ 0.394190] rockchip-dw-pcie a40c00000.pcie: PCIe Gen.1 x1 link up
  347. [ 0.394936] rockchip-dw-pcie a40c00000.pcie: PCI host bridge to bus 0003:30
  348. [ 0.395585] pci_bus 0003:30: root bus resource [bus 30-3f]
  349. [ 0.396097] pci_bus 0003:30: root bus resource [io 0x0000-0xfffff] (bus addr ess [0xf3100000-0xf31fffff])
  350. [ 0.396987] pci_bus 0003:30: root bus resource [mem 0xf3200000-0xf3ffffff]
  351. [ 0.397627] pci_bus 0003:30: root bus resource [mem 0x9c0000000-0x9ffffffff] (bus address [0x40000000-0x7fffffff])
  352. [ 0.398605] pci 0003:30:00.0: [1d87:3588] type 01 class 0x060400
  353. [ 0.399178] pci 0003:30:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  354. [ 0.399846] pci 0003:30:00.0: supports D1 D2
  355. [ 0.400244] pci 0003:30:00.0: PME# supported from D0 D1 D3hot
  356. [ 0.403131] pci 0003:30:00.0: Primary bus is hard wired to 0
  357. [ 0.403657] pci 0003:30:00.0: bridge configuration invalid ([bus 01-ff]), rec onfiguring
  358. [ 0.404553] pci 0003:31:00.0: [10ec:c822] type 00 class 0x028000
  359. [ 0.405182] pci 0003:31:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  360. [ 0.405837] pci 0003:31:00.0: reg 0x10: [io size 0x0100]
  361. [ 0.406429] pci 0003:31:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
  362. [ 0.407519] pci 0003:31:00.0: supports D1 D2
  363. [ 0.407916] pci 0003:31:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  364. [ 0.434271] pci_bus 0003:31: busn_res: [bus 31-3f] end is updated to 31
  365. [ 0.434896] pci 0003:30:00.0: BAR 8: assigned [mem 0xf3200000-0xf32fffff]
  366. [ 0.435529] pci 0003:30:00.0: BAR 6: assigned [mem 0xf3300000-0xf330ffff pref ]
  367. [ 0.436201] pci 0003:30:00.0: BAR 7: assigned [io 0x1000-0x1fff]
  368. [ 0.436770] pci 0003:31:00.0: BAR 2: assigned [mem 0xf3200000-0xf320ffff 64bi t]
  369. [ 0.437494] pci 0003:31:00.0: BAR 0: assigned [io 0x1000-0x10ff]
  370. [ 0.438073] pci 0003:30:00.0: PCI bridge to [bus 31]
  371. [ 0.438536] pci 0003:30:00.0: bridge window [io 0x1000-0x1fff]
  372. [ 0.439104] pci 0003:30:00.0: bridge window [mem 0xf3200000-0xf32fffff]
  373. [ 0.439735] pci_bus 0003:30: resource 4 [io 0x0000-0xfffff]
  374. [ 0.440262] pci_bus 0003:30: resource 5 [mem 0xf3200000-0xf3ffffff]
  375. [ 0.440845] pci_bus 0003:30: resource 6 [mem 0x9c0000000-0x9ffffffff]
  376. [ 0.441444] pci_bus 0003:31: resource 0 [io 0x1000-0x1fff]
  377. [ 0.441963] pci_bus 0003:31: resource 1 [mem 0xf3200000-0xf32fffff]
  378. [ 0.444029] pcieport 0003:30:00.0: PME: Signaling with IRQ 45
  379. [ 0.444762] pcieport 0003:30:00.0: AER: enabled with IRQ 46
  380. [ 0.445876] rockchip-dw-pcie a40000000.pcie: host bridge /pcie@fe150000 range s:
  381. [ 0.446566] rockchip-dw-pcie a40000000.pcie: IO 0x00f0100000..0x00f01ff fff -> 0x00f0100000
  382. [ 0.447389] rockchip-dw-pcie a40000000.pcie: MEM 0x00f0200000..0x00f0fff fff -> 0x00f0200000
  383. [ 0.448208] rockchip-dw-pcie a40000000.pcie: MEM 0x0900000000..0x093ffff fff -> 0x0040000000
  384. [ 0.461693] rockchip-dw-pcie a40000000.pcie: iATU: unroll T, 8 ob, 8 ib, alig n 64K, limit 8G
  385. [ 0.674185] rockchip-dw-pcie a40000000.pcie: PCIe Gen.3 x4 link up
  386. [ 0.674811] rockchip-dw-pcie a40000000.pcie: PCI host bridge to bus 0000:00
  387. [ 0.675458] pci_bus 0000:00: root bus resource [bus 00-0f]
  388. [ 0.675971] pci_bus 0000:00: root bus resource [io 0x100000-0x1fffff] (bus a ddress [0xf0100000-0xf01fffff])
  389. [ 0.676884] pci_bus 0000:00: root bus resource [mem 0xf0200000-0xf0ffffff]
  390. [ 0.677524] pci_bus 0000:00: root bus resource [mem 0x900000000-0x93fffffff] (bus address [0x40000000-0x7fffffff])
  391. [ 0.678504] pci 0000:00:00.0: [1d87:3588] type 01 class 0x060400
  392. [ 0.679068] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x3fffffff]
  393. [ 0.679654] pci 0000:00:00.0: reg 0x14: [mem 0x00000000-0x3fffffff]
  394. [ 0.680239] pci 0000:00:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  395. [ 0.680895] pci 0000:00:00.0: supports D1 D2
  396. [ 0.681295] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  397. [ 0.684214] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f])
  398. [ 0.685282] pci 0000:01:00.0: [10ec:5772] type 00 class 0x010802
  399. [ 0.685904] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
  400. [ 0.686619] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x00001fff]
  401. [ 0.687775] pci 0000:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited b y 8.0 GT/s PCIe x4 link at 0000:00:00.0 (capable of 63.012 Gb/s with 16.0 GT/s P CIe x4 link)
  402. [ 0.714252] pci 0000:00:00.0: BAR 0: assigned [mem 0x900000000-0x93fffffff]
  403. [ 0.714900] pci 0000:00:00.0: BAR 1: no space for [mem size 0x40000000]
  404. [ 0.715517] pci 0000:00:00.0: BAR 1: failed to assign [mem size 0x40000000]
  405. [ 0.716165] pci 0000:00:00.0: BAR 8: assigned [mem 0xf0200000-0xf02fffff]
  406. [ 0.716796] pci 0000:00:00.0: BAR 6: assigned [mem 0xf0300000-0xf030ffff pref ]
  407. [ 0.717468] pci 0000:01:00.0: BAR 0: assigned [mem 0xf0200000-0xf0203fff 64bi t]
  408. [ 0.718177] pci 0000:01:00.0: BAR 5: assigned [mem 0xf0204000-0xf0205fff]
  409. [ 0.718818] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  410. [ 0.719304] pci 0000:00:00.0: bridge window [mem 0xf0200000-0xf02fffff]
  411. [ 0.719936] pci_bus 0000:00: Some PCI device resources are unassigned, try bo oting with pci=realloc
  412. [ 0.720776] pci_bus 0000:00: resource 4 [io 0x100000-0x1fffff]
  413. [ 0.721329] pci_bus 0000:00: resource 5 [mem 0xf0200000-0xf0ffffff]
  414. [ 0.721911] pci_bus 0000:00: resource 6 [mem 0x900000000-0x93fffffff]
  415. [ 0.722509] pci_bus 0000:01: resource 1 [mem 0xf0200000-0xf02fffff]
  416. [ 0.724535] pcieport 0000:00:00.0: PME: Signaling with IRQ 57
  417. [ 0.725230] pcieport 0000:00:00.0: AER: enabled with IRQ 58
  418. [ 0.727467] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-2 41330
  419. [ 0.728173] dma-pl330 fea10000.dma-controller: DBUFF-128x8bytes Num_Cha ns-8 Num_Peri-32 Num_Events-16
  420. [ 0.729814] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-2 41330
  421. [ 0.730518] dma-pl330 fea30000.dma-controller: DBUFF-128x8bytes Num_Cha ns-8 Num_Peri-32 Num_Events-16
  422. [ 0.732135] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-2 41330
  423. [ 0.732840] dma-pl330 fed10000.dma-controller: DBUFF-128x8bytes Num_Cha ns-8 Num_Peri-32 Num_Events-16
  424. [ 0.734333] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  425. [ 0.736607] printk: console [ttyS2] disabled
  426. [ 0.737126] feb50000.serial: ttyS2 at MMIO 0xfeb50000 (irq = 65, base_baud = 1500000) is a 16550A
  427. [ 0.738037] printk: console [ttyS2] enabled
  428. [ 0.738037] printk: console [ttyS2] enabled
  429. [ 0.738791] printk: bootconsole [uart8250] disabled
  430. [ 0.738791] printk: bootconsole [uart8250] disabled
  431. [ 0.743724] loop: module loaded
  432. [ 0.744003] mtip32xx Version 1.3.1
  433. [ 0.745053] nvme nvme0: pci function 0000:01:00.0
  434. [ 0.745490] nvme 0000:01:00.0: enabling device (0000 -> 0002)
  435. [ 0.745681] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb2000 0/pmic@0/regulators/dcdc-reg7
  436. [ 0.746858] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb2000 0/pmic@0/dvs3-null-pins
  437. [ 0.747658] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb2000 0/pmic@0/dvs2-null-pins
  438. [ 0.748457] /spi@feb20000/pmic@0: Fixed dependency cycle(s) with /spi@feb2000 0/pmic@0/dvs1-null-pins
  439. [ 0.754054] vdd_2v0_pldo_s3: Bringing 1975000uV into 2000000-2000000uV
  440. [ 0.755332] vcc_3v3_s3: Bringing 3275000uV into 3300000-3300000uV
  441. [ 0.756753] vcc_1v8_s3: Bringing 1775000uV into 1800000-1800000uV
  442. [ 0.760153] spi-nor spi5.0: w25q128fw (16384 Kbytes)
  443. [ 0.780569] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  444. [ 0.781060] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus nu mber 1
  445. [ 0.781811] xhci-hcd xhci-hcd.3.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002000010
  446. [ 0.782350] ehci-platform fc800000.usb: EHCI Host Controller
  447. [ 0.782358] ohci-platform fc840000.usb: Generic Platform OHCI controller
  448. [ 0.782368] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 2
  449. [ 0.782417] ohci-platform fc840000.usb: irq 89, io mem 0xfc840000
  450. [ 0.782646] xhci-hcd xhci-hcd.3.auto: irq 86, io mem 0xfc000000
  451. [ 0.782652] ehci-platform fc880000.usb: EHCI Host Controller
  452. [ 0.782663] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
  453. [ 0.782690] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 3
  454. [ 0.782693] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 4
  455. [ 0.782807] ohci-platform fc8c0000.usb: irq 90, io mem 0xfc8c0000
  456. [ 0.782836] ehci-platform fc880000.usb: irq 88, io mem 0xfc88083129] ehci-pla tform fc800000.usb: new USB bus registered, assigxHCI Host Controller
  457. [ 0.784448] ehci-platform fc800000.usb:87, io mem 0xfc800000
  458. [ 0.784933] xhci-hcd xhci-hcd.3.auto: registered, assigned bus number 6
  459. [ 0.791279] xhci-hcd xhci[ 0.792169] hub 1-0:1.0: USB hub found
  460. [ 0.792515] hub 1-0:1.0: 1 port detected
  461. [ 0.793039] usb usb6: We don't know the algorithms for LPM for this host, dis abling LPM.
  462. [ 0.793961] hub 6-0:1.0: USB hub found
  463. [ 0.794336] hub 6-0:1.0: 1 port detected
  464. [ 0.794855] usbcore: registered new interface driver usb-storage
  465. [ 0.796195] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/ spi2/spi2.0/rk805-pwrkey.2.auto/input/input0
  466. [ 0.797227] i2c_dev: i2c /dev entries driver
  467. [ 0.799537] fan53555-regulator 0-0042: FAN53555 Option[10] Rev[1] Detected!
  468. [ 0.799557] fan53555-regulator 2-0042: FAN53555 Option[10] Rev[1] Detected!
  469. [ 0.800003] fan53555-regulator 0-0043: FAN53555 Option[10] Rev[1] Detected!
  470. [ 0.803446] rtc-hym8563 6-0051: registered as rtc0
  471. [ 0.804202] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
  472. [ 0.804376] rtc-hym8563 6-0051: setting system clock to 2025-02-18T15:48:25 U TC (1739893705)
  473. [ 0.805186] hub 4-0:1.0: USB hub found
  474. [ 0.805849] hub 4-0:1.0: 1 port detected
  475. [ 0.805890] /i2s@fe470000: Fixed dependency cycle(s) with /i2c@fec90000/codec @1b
  476. [ 0.806868] /i2c@fec90000/codec@1b: Fixed dependency cycle(s) with /i2s@fe470 000
  477. [ 0.808192] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
  478. [ 0.810820] sdhci: Secure Digital Host Controller Interface driver
  479. [ 0.811360] sdhci: Copyright(c) Pierre Ossman
  480. [ 0.811741] Synopsys Designware Multimedia Card Interface Driver
  481. [ 0.812493] sdhci-pltfm: SDHCI platform and OF driver helper
  482. [ 0.814750] ledtrig-cpu: registered to indicate activity on CPUs
  483. [ 0.815707] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_ id:16
  484. [ 0.816486] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  485. [ 0.817084] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware v ersion 0x0
  486. [ 0.825568] NET: Registered PF_INET6 protocol family
  487. [ 0.827227] Segment Routing with IPv6
  488. [ 0.827570] In-situ OAM (IOAM) with IPv6
  489. [ 0.827949] NET: Registered PF_PACKET protocol family
  490. [ 0.828402] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  491. [ 0.830064] 8021q: 802.1Q VLAN Support v1.8
  492. [ 0.844295] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
  493. [ 0.844344] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
  494. [ 0.845864] hub 5-0:1.0: USB hub found
  495. [ 0.846304] hub 5-0:1.0: 1 port detected
  496. [ 0.849183] hub 2-0:1.0: USB hub found
  497. [ 0.849539] hub 2-0:1.0: 1 port detected
  498. [ 0.859557] hub 3-0:1.0: USB hub found
  499. [ 0.860003] hub 3-0:1.0: 1 port detected
  500. [ 0.861749] rk808-regulator rk808-regulator.1.auto: DMA mask not set
  501. [ 0.884959] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  502. [ 0.885448] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus nu mber 7
  503. [ 0.886195] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002000010
  504. [ 0.887040] xhci-hcd xhci-hcd.5.auto: irq 101, io mem 0xfc400000
  505. [ 0.887640] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
  506. [ 0.888122] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus nu mber 8
  507. [ 0.888791] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
  508. [ 0.890211] hub 7-0:1.0: USB hub found
  509. [ 0.890636] hub 7-0:1.0: 1 port detected
  510. [ 0.891191] usb usb8: We don't know the algorithms for LPM for this host, dis abling LPM.
  511. [ 0.892142] hub 8-0:1.0: USB hub found
  512. [ 0.892486] hub 8-0:1.0: 1 port detected
  513. [ 0.896586] cpufreq: cpufreq_online: CPU0: Running at unlisted initial freque ncy: 816000 KHz, changing to: 1008000 KHz
  514. [ 0.897599] cpu cpu0: EM: created perf domain
  515. [ 0.899531] cpufreq: cpufreq_online: CPU4: Running at unlisted initial freque ncy: 816000 KHz, changing to: 1200000 KHz
  516. [ 0.900540] cpu cpu4: EM: created perf domain
  517. [ 0.905219] cpufreq: cpufreq_online: CPU6: Running at unlisted initial freque ncy: 816000 KHz, changing to: 1200000 KHz
  518. [ 0.906225] cpu cpu6: EM: created perf domain
  519. [ 0.907637] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
  520. [ 0.908269] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
  521. [ 0.908853] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
  522. [ 0.909382] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 99,32 bit h ost data width,256 deep fifo
  523. [ 0.910455] dwmmc_rockchip fe2c0000.mmc: Got CD GPIO
  524. [ 0.910608] rockchip-dw-pcie a41000000.pcie: host bridge /pcie@fe190000 range s:
  525. [ 0.911527] rockchip-dw-pcie a41000000.pcie: IO 0x00f4100000..0x00f41ff fff -> 0x00f4100000
  526. [ 0.912294] rockchip-dw-pcie a41000000.pcie: MEM 0x00f4200000..0x00f4fff fff -> 0x00f4200000
  527. [ 0.913058] rockchip-dw-pcie a41000000.pcie: MEM 0x0a00000000..0x0a3ffff fff -> 0x0040000000
  528. [ 0.913878] rockchip-dw-pcie a41000000.pcie: iATU: unroll T, 8 ob, 8 ib, alig n 64K, limit 8G
  529. [ 0.923980] mmc0: new HS400 Enhanced strobe MMC card at address 0001
  530. [ 0.924817] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  531. [ 0.924862] mmcblk0: mmc0:0001 A3A444 230 GiB
  532. [ 0.926604] mmcblk0: p1 p2
  533. [ 0.927030] mmcblk0boot0: mmc0:0001 A3A444 4.00 MiB
  534. [ 0.927821] mmcblk0boot1: mmc0:0001 A3A444 4.00 MiB
  535. [ 0.928506] mmcblk0rpmb: mmc0:0001 A3A444 4.00 MiB, chardev (245:0)
  536. [ 1.084234] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  537. [ 1.134273] rockchip-dw-pcie a41000000.pcie: PCIe Gen.2 x1 link up
  538. [ 1.134862] rockchip-dw-pcie a41000000.pcie: PCI host bridge to bus 0004:40
  539. [ 1.135469] pci_bus 0004:40: root bus resource [bus 40-4f]
  540. [ 1.135949] pci_bus 0004:40: root bus resource [io 0x200000-0x2fffff] (bus address [0xf4100000-0xf41fffff])
  541. [ 1.136802] pci_bus 0004:40: root bus resource [mem 0xf4200000-0xf4ffffff]
  542. [ 1.137399] pci_bus 0004:40: root bus resource [mem 0xa00000000-0xa3fffffff] (bus address [0x40000000-0x7fffffff])
  543. [ 1.138310] pci 0004:40:00.0: [1d87:3588] type 01 class 0x060400
  544. [ 1.138842] pci 0004:40:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  545. [ 1.139453] pci 0004:40:00.0: supports D1 D2
  546. [ 1.139826] pci 0004:40:00.0: PME# supported from D0 D1 D3hot
  547. [ 1.141953] pci 0004:40:00.0: Primary bus is hard wired to 0
  548. [ 1.142446] pci 0004:40:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
  549. [ 1.143227] pci 0004:41:00.0: [10ec:8125] type 00 class 0x020000
  550. [ 1.143793] pci 0004:41:00.0: reg 0x10: [io 0x0000-0x00ff]
  551. [ 1.144342] pci 0004:41:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
  552. [ 1.144967] pci 0004:41:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
  553. [ 1.145876] pci 0004:41:00.0: supports D1 D2
  554. [ 1.146248] pci 0004:41:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  555. [ 1.174232] usb 7-1: new high-speed USB device number 2 using xhci-hcd
  556. [ 1.174239] pci_bus 0004:41: busn_res: [bus 41-4f] end is updated to 41
  557. [ 1.175391] pci 0004:40:00.0: BAR 8: assigned [mem 0xf4200000-0xf42fffff]
  558. [ 1.175983] pci 0004:40:00.0: BAR 6: assigned [mem 0xf4300000-0xf430ffff pref]
  559. [ 1.176617] pci 0004:40:00.0: BAR 7: assigned [io 0x200000-0x200fff]
  560. [ 1.177179] pci 0004:41:00.0: BAR 2: assigned [mem 0xf4200000-0xf420ffff 64bit]
  561. [ 1.177843] pci 0004:41:00.0: BAR 4: assigned [mem 0xf4210000-0xf4213fff 64bit]
  562. [ 1.178507] pci 0004:41:00.0: BAR 0: assigned [io 0x200000-0x2000ff]
  563. [ 1.179076] pci 0004:40:00.0: PCI bridge to [bus 41]
  564. [ 1.179508] pci 0004:40:00.0: bridge window [io 0x200000-0x200fff]
  565. [ 1.180069] pci 0004:40:00.0: bridge window [mem 0xf4200000-0xf42fffff]
  566. [ 1.180661] pci_bus 0004:40: resource 4 [io 0x200000-0x2fffff]
  567. [ 1.181177] pci_bus 0004:40: resource 5 [mem 0xf4200000-0xf4ffffff]
  568. [ 1.181722] pci_bus 0004:40: resource 6 [mem 0xa00000000-0xa3fffffff]
  569. [ 1.182282] pci_bus 0004:41: reso pci_bus 0004:41: resource 1 [mem 0xf4200000-0xf42fffff]
  570. [ 1.184456] pcieport 0004:40:00.0: PME: Signaling with IRQ 113
  571. [ 1.185351] pcieport 0004:40:00.0: AER: enabled with IRQ 114
  572. [ 1.191681] rockchip-dw-pcie a40800000.pcie: host bridge /pcie@fe170000 ranges:
  573. [ 1.192322] rockchip-dw-pcie a40800000.pcie: IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
  574. [ 1.193086] rockchip-dw-pcie a40800000.pcie: MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
  575. [ 1.193849] rockchip-dw-pcie a40800000.pcie: MEM 0x0980000000..0x09bfffffff -> 0x0040000000
  576. [ 1.194663] rockchip-dw-pcie a40800000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G
  577. [ 1.336138] hub 1-1:1.0: USB hub found
  578. [ 1.336563] hub 1-1:1.0: 4 ports detected
  579. [ 1.401749] hub 7-1:1.0: USB hub found
  580. [ 1.402448] hub 7-1:1.0: 4 ports detected
  581. [ 1.414283] rockchip-dw-pcie a40800000.pcie: PCIe Gen.2 x1 link up
  582. [ 1.414873] rockchip-dw-pcie a40800000.pcie: PCI host bridge to bus 0002:20
  583. [ 1.415480] pci_bus 0002:20: root bus resource [bus 20-2f]
  584. [ 1.415960] pci_bus 0002:20: root bus resource [io 0x300000-0x3fffff] (bus address [0xf2100000-0xf21fffff])
  585. [ 1.416814] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
  586. [ 1.417412] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff] (bus address [0x40000000-0x7fffffff])
  587. [ 1.418320] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
  588. [ 1.418853] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  589. [ 1.419464] pci 0002:20:00.0: supports D1 D2
  590. [ 1.419837] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
  591. [ 1.421932] pci 0002:20:00.0: Primary bus is hard wired to 0
  592. [ 1.422425] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
  593. [ 1.423209] pci 0002:21:00.0: [10ec:8125] type 00 class 0x020000
  594. [ 1.423776] pci 0002:21:00.0: reg 0x10: [io 0x0000-0x00ff]
  595. [ 1.424325] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x0000ffff 64bit]
  596. [ 1.424950] pci 0002:21:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
  597. [ 1.425859] pci 0002:21:00.0: supports D1 D2
  598. [ 1.426231] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  599. [ 1.454293] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
  600. [ 1.454879] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf22fffff]
  601. [ 1.455471] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2300000-0xf230ffff pref]
  602. [ 1.456100] pci 0002:20:00.0: BAR 7: assigned [io 0x300000-0x300fff]
  603. [ 1.456662] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2200000-0xf220ffff 64bit]
  604. [ 1.457326] pci 0002:21:00.0: BAR 4: assigned [mem 0xf2210000-0xf2213fff 64bit]
  605. [ 1.457990] pci 0002:21:00.0: BAR 0: assigned [io 0x300000-0x3000ff]
  606. [ 1.458558] pci 0002:20:00.0: PCI bridge to [bus 21]
  607. [ 1.458990] pci 0002:20:00.0: bridge window [io 0x300000-0x300fff]
  608. [ 1.459551] pci 0002:20:00.0: bridge window [mem 0xf2200000-0xf22fffff]
  609. [ 1.460142] pci_bus 0002:20: resource 4 [io 0x300000-0x3fffff]
  610. [ 1.460659] pci_bus 0002:20: resource 5 [mem 0xf2200000-0xf2ffffff]
  611. [ 1.461203] pci_bus 0002:20: resource 6 [mem 0x980000000-0x9bfffffff]
  612. [ 1.461763] pci_bus 0002:21: resource 0 [io 0x300000-0x300fff]
  613. [ 1.462279] pci_bus 0002:21: resource 1 [ 1.463898] pcieport 0002:20:00.0: PME: Signaling with IRQ 125
  614. [ 1.464814] pcieport 0002:20:00.0: AER: enabled with IRQ 126
  615. [ 1.469259] clk: Disabling unused clocks
  616. [ 1.470307] dw-apb-uart feb50000.serial: forbid DMA for kernel console
  617. [ 1.504427] usb 8-1: new SuperSpeed USB device number 2 using xhci-hcd
  618. [ 1.524196] usb 3-1: new full-speed USB device number 2 using ohci-platform
  619. [ 1.578466] hub 8-1:1.0: USB hub found
  620. [ 1.579635] hub 8-1:1.0: 4 ports detected
  621. [ 1.664286] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
  622. [ 1.754215] usb 7-1.1: new full-speed USB device number 3 using xhci-hcd
  623. [ 1.854293] usb 8-1: Failed to suspend device, error -19
  624. [ 2.073517] hwmon hwmon7: temp1_input not attached to any thermal zone
  625. [ 2.076250] nvme nvme0: allocated 64 MiB host memory buffer.
  626. [ 2.137648] usb 8-1: reset SuperSpeed USB device number 2 using xhci-hcd
  627. [ 2.240321] nvme nvme0: 8/0/0 default/read/poll queues
  628. [ 2.284238] usb 7-1.2: new full-speed USB device number 4 using xhci-hcd
  629. [ 2.304294] usb 8-1: Failed to suspend device, error -19
  630. [ 2.365283] nvme0n1: p1 p2
  631. [ 2.374092] EXT4-fs (mmcblk0p2): recovery complete
  632. [ 2.374546] EXT4-fs (mmcblk0p2): mounted filesystem ff313567-e9f1-5a5d-9895-3ba130b4a864 r/w with ordered data mode. Quota mode: none.
  633. [ 2.375618] VFS: Mounted root (ext4 filesystem) on device 179:2.
  634. [ 2.376560] Freeing unused kernel memory: 2240K
  635. [ 2.377074] Run /sbin/init as init process
  636. [ 2.450227] I/O error, dev mmcblk0, sector 147984 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  637. [ 2.526689] I/O error, dev mmcblk0, sector 147782 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
  638. [ 2.540494] I/O error, dev mmcblk0, sector 147858 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  639. [ 2.541449] I/O error, dev mmcblk0, sector 147859 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  640. [ 2.542400] I/O error, dev mmcblk0, sector 147860 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  641. [ 2.551005] I/O error, dev mmcblk0, sector 147940 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  642. [ 2.629826] I/O error, dev mmcblk0, sector 147134 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  643. [ 2.630793] I/O error, dev mmcblk0, sector 147135 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  644. [ 2.631924] I/O error, dev mmcblk0, sector 147137 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  645. [ 2.633323] I/O error, dev mmcblk0, sector 147143 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
  646. [ 2.700132] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007
  647. [ 2.700800] CPU: 7 PID: 1 Comm: init Not tainted 6.6.73 #0
  648. [ 2.701280] Hardware name: FriendlyElec NanoPC-T6 (DT)
  649. [ 2.701727] Call trace:
  650. [ 2.701941] 0xffff80008001c198
  651. [ 2.702217] 0xffff80008001c1f0
  652. [ 2.702491] 0xffff800080965b40
  653. [ 2.702765] 0xffff800080965b70
  654. [ 2.703039] 0xffff8000800466f0
  655. [ 2.703313] 0xffff80008004bf74
  656. [ 2.703587] 0xffff80008004c25c
  657. [ 2.703861] 0xffff8000800598b0
  658. [ 2.704135] 0xffff80008001ba20
  659. [ 2.704410] 0xffff80008098ad88
  660. [ 2.704683] 0xffff80008098b330
  661. [ 2.704957] 0xffff800080011558
  662. [ 2.705232] SMP: stopping secondary CPUs
  663. [ 2.705632] Kernel Offset: disabled
  664. [ 2.705936] CPU features: 0x0,c0000000,70028141,1000700b
  665. [ 2.706398] Memory Limit: none
  666. [ 2.706666] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 ]---
  667.  
Tags: OpenWRT NanoPC-t6
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!