★ Julio Lopez places his duffelbag onto the ground, looking at the vehicle as he quickly inspects it.
 [English] Julio Lopez says: So, you have a key?
★ Anthony Koestler looks around the room than slowly gazes back towards Julio.
 [English] Anthony Koestler says: Umm.
 [English] Anthony Koestler says: Nope.
★ Julio Lopez opens up his laptop, taking it out, opening it and placing it onto the floor.
★ Julio Lopez takes out Funcube Dongles from his backpack.
★ Julio Lopez hooks up the Funcube Dongles into the laptop, then starts detecting wave signals emitted by
★ - the alarm system.      ((Julio Lopez))
★ Julio Lopez starts feeding data into the alarm RFID, jamming it as the laptop's recording the data
★ sent by the alarm system, playing back the log afterwards as to break the alarm system      ((Julio Lopez))
★ - entirely.      ((Julio Lopez))
★ The alarm would no longer work, Julio then takes out a Socimi from his backpack, unloads      ((Julio Lopez))
★ - the weapon and hits the window with the back of the weapon as to break it open.      ((Julio Lopez))
((OOC Chance at 80%)) Julio Lopez's attempt has succeeded.
★ The window breaks.      ((Julio Lopez))
★ Julio Lopez unlocks the window and opens up the vehicle. The broken alarm would not pose a problem.
★ Julio Lopez enters the vehicle, pulling a button as to open up the vehicle's hood.
★ Julio Lopez hops out the driver's seat, steps outside and heads to the front of the vehicle - opening
★ up the hood entirely as he reaches under it and supports it with the stands.      ((Julio Lopez))
★ Julio Lopez reaches inside the duffelbag, taking out a toolbox and a bolt organizer box.
★ Julio Lopez places both of the boxes onto the ground near the hood, then reaches into the toolbox and
★ - takes out a socket and ratchet, then untightens the nuts on the battery's negative -      ((Julio Lopez))
★ - terminal, proceeding to remove the cable and repeats the action for the positive cable      ((Julio Lopez))
★ after removing the plastic cover, and removes that as well.      ((Julio Lopez))
★ Julio Lopez then reaches for the battery handles and pulls it from its position - placing it onto the g-
★ -round.      ((Julio Lopez))
★ Julio Lopez places back the socket and wrench into the toolbox, then reaches around for a -
★ - hydraulic jack, placing one near the vehicle before realizing it wouldn't work.      ((Julio Lopez))
★ Julio Lopez enters the vehicle, lowering the handbrake and places it onto neutral, then starts pushing
★ the vehicle over the lift.      ((Julio Lopez))
★ Julio Lopez reaches for two medium sized containers near the lift, placing them under the coolant
★ and another one under the engine oil valve, then unscrews the valves as to drain -      ((Julio Lopez))
★ - both of them into the containers.      ((Julio Lopez))
★ There would be a lo amount of glitter in the oil due to low amount of metal in the system.      ((Julio Lopez))
★ Julio Lopez ensures the fluids are completely drained into the containers.
★ Julio Lopez proceeds to unplug a coolant line running from the radiator to the transmission -
★ - coolant, then reaches into the toolbox quickly and plugs it into the line to prevent leaki      ((Julio Lopez))
★ -ng the fluid everywhere.      ((Julio Lopez))
★ Julio Lopez reaches for a 45 degrees pliers and a 90 degrees pliers - using both to reach into the hose
★ clamps and removes a second line.      ((Julio Lopez))
★ Julio Lopez places back the clamps into the toolbox, then reaches into it once more for a socket and
★ wrench, removing the bolts holding the radiator then placing the bolts into the      ((Julio Lopez))
★ - bolt organizer in a space labeled "RAD" and places back the socket and ratchet into -      ((Julio Lopez))
★ - the toolbox, then removes the radiator entirely from the vehicle and leans it up onto the      ((Julio Lopez))
★ - wall.      ((Julio Lopez))
★ Julio Lopez reaches into the hood once more as he aims for the throttle cable, rolling it backwards
★ - then proceeds to slip the cable out.      ((Julio Lopez))
★ Julio Lopez reaches into the toolbox and takes out the ratchet and socket once more, removing the
★ - bolts that hold the cable to the intake, then places the bolts into the holder's second      ((Julio Lopez))
★ - slot.      ((Julio Lopez))
★ Julio Lopez pushes the intake out of the way.
★ Julio Lopez reaches into the toolbox for a white small marker.
★ Julio Lopez marks the hood hinges as to line them up properly -
★ - given that they're going to be uninstalled.      ((Julio Lopez))
★ Julio Lopez places back the marker into the toolbox.
★ Julio Lopez reaches for the hood, lowering it and places his hands under it for the few bolts carefully-
★ - as to not scratch the fenders.      ((Julio Lopez))
★ Julio Lopez unscrews the bolts.
★ Julio Lopez removes the hood entirely and places it next to the radiator.
★ Julio Lopez unbolts the air box using the socket and ratchet.
★ Julio Lopez removes it and places it next to the other car parts.
★ Julio Lopez proceeds to remove the wiring harness between the runners of the intake manifold and
★ - places them next to the other parts.      ((Julio Lopez))
★ Julio Lopez disconnects the air compressor and the power steering pump.
★ Julio Lopez reaches for three bolts on the power assembly.
★ Julio Lopez uses a 14mm socket as to remove one bolt.
★ Julio Lopez uses a 17mm socket to remove the other two.
★ Julio Lopez removes the bolts then places them into the bolt organizer.
★ Julio Lopez removes the pump from the engine and pushes it out of the way.
★ Julio Lopez reaches for the impact gun in the toolbox.
★ Julio Lopez proceeds to remove the bolts holding the harmonic balancer.
★ Julio Lopez pulls out the harmonic balancer and places it next to the vehicle parts.
★ Julio Lopez threads back the bolt that held the harmonic balancer into place.
★ Julio Lopez reaches for the exhaust pipe.
★ Julio Lopez disconnects the bolts holding it with the impact gun.
★ Julio Lopez places back the gun into the toolbox.
★ Julio Lopez reaches for a hydraulic jack near the wall.
★ Julio Lopez pushes it under the transmission pan to push the pan up.
★ Julio Lopez pulls out the transmission pan.
★ The cover hiding the drive plate would be visible.      ((Julio Lopez))
★ Julio Lopez pulls the plastic cover.
★ Julio Lopez places the plastic cover next to the car parts.
★ Julio Lopez turns his attention to the clear torque converter, previously hidden by the -
★ - plastic cover.      ((Julio Lopez))
★ Julio Lopez digs into the toolbox for a small white paint marker.
★ Julio Lopez marks the torque converter and drive plate so that they can be aligned later on.
★ Julio Lopez places back the marker into the toolbox.
★ Julio Lopez reaches for a socket with a ratchet as he starts to loosen up the spark plugs.
★ Julio Lopez places the socket and ratchet onto the bolts on the crank shaft and loosens them up.
* Anthony Koestler presses on the key to lock the vehicle. ((1999 Nissan Silvia S15)) *
★ Julio Lopez loosens the crank shaft bolts from the torque converter, moving the converter with his other
★ - hand as he rotates it and removes the bolts from it accordingly - without worrying given -      ((Julio Lopez))
★ - that the parts can be easily aligned later on.      ((Julio Lopez))
★ Julio Lopez heads for the engine-to-transmission bolts as he starts loosening them up using -
★ - the socket and ratchet.      ((Julio Lopez))
★ Julio Lopez removes the second grade 8 bolt underneath the cover.
★ Julio Lopez reaches for another jack near the counter.
★ Julio Lopez reaches into the counter itself for a small block of wood which he adjusts onto the jack.
★ Julio Lopez pushes it under the oil pan as to get clearance on the engine bolts to unscrew and
★ - remove them.      ((Julio Lopez))
★ Julio Lopez removes the bolts and nut set from the first engine mount near the hood.
★ Julio Lopez places the bolts accordingly into the bolts organizer.
★ Julio Lopez removes the bolts and nut sets on the second engine mount, near the fender.
★ Julio Lopez removes the final engine to transmission bolt which was already loosened earlier.
★ As all the bolts are removed - a small gap would appear between the engine and -      ((Julio Lopez))
★ - transmission.      ((Julio Lopez))
★ Julio Lopez reaches for a Goodyear Racing Crane as he moves it towards the left fender.
★ Julio Lopez reaches for a chain, then ties it up around the intake runners and the exhaust manifold -
★ - around the engine.      ((Julio Lopez))
★ Julio Lopez hooks up the chain to the crane - ensuring nothing is bound up by the chain at all.
★ Julio Lopez double checks that there is nothing remaining still connected to the engine before aiming
★ for the crane.      ((Julio Lopez))
★ Julio Lopez jacks up the crane until the tension starts to build on the chain, again making sure
★ - nothing is binding by heading towards the engine after the tension has been built and -      ((Julio Lopez))
★ - moving the engine a bit, also separating it farther from the transmission.      ((Julio Lopez))
★ Julio Lopez reaches for a pry bar, then pushes it between the engine and transmission as to
★ separate them further.      ((Julio Lopez))
★ Julio Lopez pumps the crane again - looking around carefully to ensure nothing is binding the engine.
★ The drive plate would be entirely visible.      ((Julio Lopez))
★ Julio Lopez cranks up the engine entirely from the vehicle, then carefully pushes the crane -
★ - away after ensuring the engine has enough leverage.      ((Julio Lopez))
★ The engine would now be completely removed.      ((Julio Lopez))
★ Julio Lopez grabs a 2mm socket and wrench, then begins to twist the bumper's bolt counter -
★ - clockwise.      ((Julio Lopez))
★ The radiator is already removed along with everything else in the engine bay.      ((Julio Lopez))
★ The bumpers are now removed as well.      ((Julio Lopez))
★ Julio Lopez grabs a 9mm spanner and applies to the brake hose, twisting it counter-clockwise to
★ release the bolt.      ((Julio Lopez))
★ Julio Lopez applies the spanner to both bolts sequentially in order to remove them, then pops out
★ - the brake pads.      ((Julio Lopez))
★ Julio Lopez places the brake caliper next to the other car parts.
★ Julio Lopez repeats the process for the other brake caliper.
★ The wheels were already removed.      ((Julio Lopez))
★ Julio Lopez reaches for a hydraulic jack.
★ Julio Lopez places down the jack next to him, then reaches forwards towards the rubber tube -
★ - in the front driver's door, pulling it out until an electricity connector is revealed.      ((Julio Lopez))
★ Julio Lopez pulls the connector apart, depressing the tab and separating the door until the door -
★ - is half removed from the car body.      ((Julio Lopez))
★ Julio Lopez unbolts the hinges entirely, then slowly places his left hand under the door as the -
★ - hinges fall off, then holds the door and rests it up against the wall.      ((Julio Lopez))
★ Julio Lopez repeats the process with the other door.