Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- HELLO! BOOT0 is starting!
- boot0 commit : 045061a8bb2580cb3fa02e301f52a015040c158f
- boot0 version : 4.0.0
- set pll start
- set pll end
- rtc[0] value = 0x00000000
- rtc[1] value = 0x000000d0
- rtc[2] value = 0x00000000
- rtc[3] value = 0x0000a101
- rtc[4] value = 0x00000000
- rtc[5] value = 0x00000000
- DRAM driver version: V1.1
- start ddr type auto scan mode
- rsb_send_initseq: rsb clk 400Khz -> 3Mhz
- PMU: AXP81X
- ddr voltage = 1280 mv
- DRAM init OK
- lpddr3 try success
- DRAM Type = 7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM clk = 408 MHz
- DRAM zq value: 003939b9
- DRAM dual rank full DQ gate training OK
- DRAM size = 2048 MB
- DRAM init ok
- dram size =2048
- card boot number = 0, boot0 copy = 0
- card no is 0
- sdcard 0 line count 4
- [mmc]: mmc driver ver 2015-05-08 20:06
- [mmc]: sdc0 spd mode error, 2
- [mmc]: Wrong media type 0x00000000
- [mmc]: ***Try SD card 0***
- [mmc]: HSSDR52/SDR25 4 bit
- [mmc]: 50000000 Hz
- [mmc]: 15247 MB
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- The size of uboot is 000f8000.
- sum=ddc82f72
- src_sum=ddc82f72
- Succeed in loading uboot from sdmmc flash.
- boot0: start load other image
- boot0: Loading BL3-1
- Loading file 0 at address 0x40000000,size 0x0000a400 success
- boot0: Loading scp
- Loading file 2 at address 0x00040000,size 0x00019c00 success
- set arisc reset to de-assert state
- Ready to disable icache.
- Jump to secend Boot.æ=Q%é Configuring SPC Controller
- NOTICE: BL3-1: v1.0(debug):864ef11
- NOTICE: BL3-1: Built : 15:16:02, Jul 31 2017
- INFO: BL3-1: Initializing runtime services
- INFO: BL3-1: Preparing for EL3 exit to normal world
- INFO: BL3-1: Next image address = 0x4a000000
- INFO: BL3-1: Next image spsr = 0x1d3
- U-Boot 2014.07-g147bec3 (Jul 31 2017 - 15:15:57) Allwinner Technology
- uboot commit : 147bec3f7735cc967a7aa4311efa1a473df7ac7f
- rsb: secure monitor exist
- [ 0.415]pmbus: ready
- [ 0.418][ARISC] :arisc initialize
- [ 0.944][ARISC] :arisc_dvfs_cfg_vf_table: support only one vf_table
- [SCP] :sunxi-arisc driver begin startup 2
- [SCP] :arisc_para size:1a8
- [SCP] :arisc version: [v0.1.76]
- [SCP] :sunxi-arisc driver v1.10 is starting
- [ 1.135][ARISC] :sunxi-arisc driver startup succeeded
- [ 1.186]PMU: AXP81X
- [ 1.188]PMU: AXP81X found
- bat_vol=4132, ratio=99
- [ 1.196]PMU: dcdc2 1100
- [ 1.199]PMU: cpux 1008 Mhz,AXI=336 Mhz
- PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz AHB2=300Mhz MBus=400Mhz
- device_type = 3253, onoff=1
- dcdc1_vol = 3300, onoff=1
- dcdc2_vol = 1100, onoff=1
- dcdc6_vol = 1100, onoff=1
- aldo1_vol = 2800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 2500, onoff=0
- dldo3_vol = 2800, onoff=0
- dldo4_vol = 3300, onoff=1
- eldo1_vol = 1800, onoff=1
- eldo2_vol = 1800, onoff=0
- eldo3_vol = 1800, onoff=0
- fldo1_vol = 1200, onoff=0
- fldo2_vol = 1100, onoff=1
- gpio0_vol = 3100, onoff=1
- vbus not exist
- only battery exist, limit to dc
- run key detect
- no key found
- no uart input
- DRAM: 2 GiB
- fdt addr: 0xb6eb99e0
- Relocation Offset is: 75f0c000
- In: serial
- Out: serial
- Err: serial
- gic: sec monitor mode
- [ 1.558]start
- drv_disp_init
- init_clocks: finish init_clocks.
- fdt_get_one_gpio lcd0.lcd_gpio_2 fail
- fdt_get_one_gpio lcd0.lcd_gpio_3 fail
- fdt_get_one_gpio lcd0.lcd_gpio_scl fail
- fdt_get_one_gpio lcd0.lcd_gpio_sda fail
- pwm_request: reg = 0x1c21400.pchip->pwm = 0
- reg_busy_offset=0, reg_busy_shift = 0, reg_enable_offset = 0
- request pwm success, pwm = 0!
- sunxi_pwm_config: reg_shift = 0, reg_width = 4, prescale temp = 20, pres=0
- PWM _TEST: duty_ns=976562, period_ns=5000000, freq=200, per_scal=1, period_reg=0x3e700c3
- enable power vcc-hdmi-33, ret=0
- drv_disp_init finish
- boot_disp.output_disp=0
- boot_disp.output_type=1
- boot_disp.output_mode=4
- fetch script data boot_disp.auto_hpd fail
- disp0 device type(1) enable
- disp 0, clk: pll(480000000),clk(480000000),dclk(80000000) dsi_rate(480000000)
- clk real:pll(479769230),clk(479769230),dclk(79961538) dsi_rate(0)
- enable power vcc-mipi, ret=0
- enable power vcc-hsic-12, ret=0
- enable power vcc-lvds, ret=0
- enable power vcc-pd, ret=0
- [ 3.173]end
- workmode = 0,storage type = 1
- [ 3.177]MMC: 0
- [mmc]: mmc driver ver 2015-06-03 13:50:00
- [ 3.193]
- lcd_edp_tx_rate=2,
- lcd_edp_tx_lane=1,
- lcd_edp_colordepth=1,
- lcd_model_name=2
- [ 3.203]ANX9807 Chip found
- [ 3.308]..................................clock is detected.
- [ 3.337]..................................clock is stable.
- sunxi_pwm_config: reg_shift = 0, reg_width = 4, prescale temp = 70, pres=0
- PWM _TEST: duty_ns=996094, period_ns=5000000, freq=200, per_scal=1, period_reg=0x3e700c7
- sunxi_pwm_config: reg_shift = 0, reg_width = 4, prescale temp = 70, pres=0
- PWM _TEST: duty_ns=996094, period_ns=5000000, freq=200, per_scal=1, period_reg=0x3e700c7
- SUNXI SD/MMC: 0
- [mmc]: start mmc_calibrate_delay_unit, don't access device...
- [mmc]: delay chain cal done, sample: 200(ps)
- [mmc]: media type 0x0
- [mmc]: Wrong media type 0x0
- [mmc]: ************Try SD card 0************
- [mmc]: host caps: 0x27
- [mmc]: MID 1b PSN c54e5d48
- [mmc]: PNM BA1MW -- 0x42-41-31-4d-57
- [mmc]: PRV 3.0
- [mmc]: MDT m-1 y-2017
- [mmc]: speed mode : HSSDR52/SDR25
- [mmc]: clock : 50000000 Hz
- [mmc]: bus_width : 4 bit
- [mmc]: user capacity : 15247 MB
- [mmc]: ************SD/MMC 0 init OK!!!************
- [mmc]: erase_grp_size : 0x1WrBlk*0x200=0x200 Byte
- [mmc]: secure_feature : 0x0
- [mmc]: secure_removal_type : 0x0
- [ 4.016]sunxi flash init ok
- [mmc]: Has init
- [ 4.115]---drivers/mmc/mmc.c 2733 mmc_init
- ** Unable to use mmc 0:1 for loading the env **
- Using default environment
- --------fastboot partitions--------
- mbr not exist
- base bootcmd=run mmcbootcmd
- bootcmd set setargs_mmc
- key 0
- recovery key high 12, low 10
- fastboot key high 6, low 4
- no misc partition is found
- to be run cmd=run mmcbootcmd
- update dtb dram start
- update dtb dram end
- serial is: 8400503443184015014e
- check for ANX9807
- found ANX9807 chip
- Pine64 model: pine64-pinebook
- PowerBus = 0(0: not exist 1:vBus 2:acBus 3:vBus&acBus)
- Battery Voltage=4063, Ratio=99
- key trigger
- sunxi_bmp_logo_display
- [mmc]: Has init
- [ 4.709]---drivers/mmc/mmc.c 2733 mmc_init
- ** Unrecognized filesystem type **
- sunxi bmp info error : unable to open logo file bootlogo.bmp
- [ 4.723]inter uboot shell
- autoboot in 1 seconds, Press s to abort
- [mmc]: Has init
- [ 5.986]---drivers/mmc/mmc.c 2733 mmc_init
- [mmc]: Has init
- [ 6.013]---drivers/mmc/mmc.c 2733 mmc_init
- [mmc]: Has init
- [ 6.042]---drivers/mmc/mmc.c 2733 mmc_init
- 668 bytes read in 22 ms (29.3 KiB/s)
- Loading boot environment ...
- [mmc]: Has init
- [ 6.084]---drivers/mmc/mmc.c 2733 mmc_init
- [mmc]: Has init
- [ 6.111]---drivers/mmc/mmc.c 2733 mmc_init
- [mmc]: Has init
- [ 6.145]---drivers/mmc/mmc.c 2733 mmc_init
- 6397 bytes read in 27 ms (230.5 KiB/s)
- Booting with script ...
- ## Executing script at 41000000
- [mmc]: Has init
- [ 6.212]---drivers/mmc/mmc.c 2733 mmc_init
- 70830 bytes read in 40 ms (1.7 MiB/s)
- HDMI mode: <0x0000000a>
- HDMI CEC is disabled
- Booting from SD so moving eMMC definition...
- [FDT] duplicating sdmmc@01C11000 of /soc@01c00000/ to sdmmc@01C11001...
- sdmmc@01C11000 {
- compatible = "allwinner,sun50i-sdmmc2";
- device_type = "sdc2";
- reg = <0x00000000 0x01c11000 0x00000000 0x00001000>;
- interrupts = <0x00000000 0x0000003e 0x00000104>;
- clocks = <0x00000006 0x0000005a 0x0000005b 0x0000005c 0x0000005d>;
- clock-names = "osc24m", "pll_periph", "mmc", "ahb", "rst";
- pinctrl-names = "default", "sleep";
- pinctrl-1 = <0x0000005f>;
- bus-width = <0x00000008>;
- max-frequency = <0x05f5e100>;
- sdc_tm4_sm0_freq0 = <0x00000000>;
- sdc_tm4_sm0_freq1 = <0x00000000>;
- sdc_tm4_sm1_freq0 = <0x00000000>;
- sdc_tm4_sm1_freq1 = <0x00000000>;
- sdc_tm4_sm2_freq0 = <0x00000000>;
- sdc_tm4_sm2_freq1 = <0x00000000>;
- sdc_tm4_sm3_freq0 = <0x05000000>;
- sdc_tm4_sm3_freq1 = <0x00000405>;
- sdc_tm4_sm4_freq0 = <0x00050000>;
- sdc_tm4_sm4_freq1 = <0x00000408>;
- status = "okay";
- non-removable;
- pinctrl-0 = <0x000000c2>;
- cd-gpios;
- sunxi-power-save-mode;
- sunxi-dis-signal-vol-sw;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- mmc-hs400-1_8v;
- vmmc = "vcc-emmcv";
- vqmmc = "vcc-emmcvq18";
- vdmmc = "none";
- };
- [mmc]: Has init
- [ 7.056]---drivers/mmc/mmc.c 2733 mmc_init
- 10815096 bytes read in 626 ms (16.5 MiB/s)
- [mmc]: Has init
- [ 7.696]---drivers/mmc/mmc.c 2733 mmc_init
- ** File not found initrd.img **
- Image lacks image_size field, assuming 16MiB
- ## Flattened Device Tree blob at 45000000
- Booting using the fdt blob at 0x45000000
- reserving fdt memory region: addr=41010000 size=10000
- reserving fdt memory region: addr=41020000 size=800
- reserving fdt memory region: addr=40100000 size=4000
- reserving fdt memory region: addr=40104000 size=1000
- reserving fdt memory region: addr=40105000 size=1000
- reserving fdt memory region: addr=45000000 size=12000
- Loading Device Tree to 44fea000, end 44ffefff ... OK
- Starting kernel ...
- [mmc]: MMC Device 2 not found
- [mmc]: mmc 2 not find, so not exit
- INFO: BL3-1: Next image address = 0x41080000
- INFO: BL3-1: Next image spsr = 0x3c9
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.105-bsp-1.2-ayufan-86 (root@774cabd4bc52) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.4) ) #1 SMP PREEMPT Fri Jul 21 08:43:13 UTC 2017
- [ 0.000000] CPU: AArch64 Processor [410fd034] revision 4
- [ 0.000000] Machine: sun50iw1p1
- [ 0.000000] bootconsole [earlycon0] enabled
- [ 0.000000] cma: CMA: reserved 64 MiB at bc000000
- [ 0.000000] On node 0 totalpages: 520192
- [ 0.000000] DMA zone: 7112 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 520192 pages, LIFO batch:31
- [ 0.000000] script_init enter!
- [ 0.000000] script buffer is NULL!
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv0.2 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @ffffffc07af91000 s18752 r8192 d22208 u49152
- [ 0.000000] pcpu-alloc: s18752 r8192 d22208 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513080
- [ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200n8 no_console_suspend earlycon=uart,mmio32,0x01c28000 mac_addr= root=/dev/mmcblk0p1 rw rootwait boot=live components hostname=live-pc username=live earlyprintk=sunxi-uart,0x01c28000 loglevel=8
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.000000] Memory: 2032MB = 2032MB total
- [ 0.000000] Memory: 1971520k/1971520k available, 109248k reserved
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000 (245759 MB)
- [ 0.000000] vmemmap : 0xffffffbc00e38000 - 0xffffffbc02a00000 ( 27 MB)
- [ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc07f000000 ( 2032 MB)
- [ 0.000000] .init : 0xffffffc0009ab000 - 0xffffffc000a2c940 ( 519 kB)
- [ 0.000000] .text : 0xffffffc000080000 - 0xffffffc0009aaa44 ( 9387 kB)
- [ 0.000000] .data : 0xffffffc000a2d000 - 0xffffffc000ad0678 ( 654 kB)
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] allocated 8388608 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 8.367188] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 8.377315] pid_max: default: 32768 minimum: 301
- [ 8.381932] Security Framework initialized
- [ 8.385883] AppArmor: AppArmor initialized
- [ 8.389887] Mount-cache hash table entries: 256
- [ 8.405476] Initializing cgroup subsys memory
- [ 8.405566] Initializing cgroup subsys devices
- [ 8.408581] Initializing cgroup subsys freezer
- [ 8.412945] Initializing cgroup subsys blkio
- [ 8.417107] Initializing cgroup subsys perf_event
- [ 8.421718] Initializing cgroup subsys hugetlb
- [ 8.426139] ftrace: allocating 26606 entries in 104 pages
- [ 8.464689] CPU0: update cpu_power 1968128
- [ 8.464746] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
- [ 8.472716] CPU1: Booted secondary processor
- [ 8.472748] CPU1: update cpu_power 1968128
- [ 8.475338] CPU2: Booted secondary processor
- [ 8.475350] CPU2: update cpu_power 1968128
- [ 8.479458] CPU3: Booted secondary processor
- [ 8.479469] CPU3: update cpu_power 1968128
- [ 8.479546] Brought up 4 CPUs
- [ 8.501506] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 8.508218] devtmpfs: initialized
- [ 8.516065] atomic64 test passed
- [ 8.516097] pinctrl core: initialized pinctrl subsystem
- [ 8.522290] NET: Registered protocol family 16
- [ 8.523853] script_sysfs_init success
- [ 8.527308] dump_class_init,806, success
- [ 8.531321] vdso: 2 pages (1 code, 1 data) at base ffffffc000a35000
- [ 8.537073] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 8.545316] software IO TLB [mem 0xb8800000-0xb8c00000] (4MB) mapped at [ffffffc077800000-ffffffc077bfffff]
- [ 8.554350] DMA: preallocated 256 KiB pool for atomic allocations
- [ 8.559301] Serial: AMBA PL011 UART driver
- [ 8.563339] axp81x_board_init: axp regl_devs num = 23
- [ 8.568338] pll_audio-set_default_rate=24576000 success!
- [ 8.573399] pll_video0-set_default_rate=297000000 success!
- [ 8.578837] pll_video1-set_default_rate=297000000 success!
- [ 8.584188] pll_de-set_default_rate=297000000 success!
- [ 8.589918] de-set_default_source=pll_de success!
- [ 8.593766] de-set_default_rate=297000000 success!
- [ 8.598494] tcon0-set_default_source=pll_mipi success!
- [ 8.603527] tcon1-set_default_source=pll_video0 success!
- [ 8.608909] hdmi-set_default_source=pll_video0 success!
- [ 8.616217] sun50i-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
- [ 8.620712] [sun50iw1p1_pinctrl_probe][838]
- [ 8.626357] sun50i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 8.631860] sunxi hwspinlock vbase:0xffffff8000056000
- [ 8.646486] bio: create slab <bio-0> at 0
- [ 8.646915] pwm module init!
- [ 8.649034] SCSI subsystem initialized
- [ 8.651509] usbcore: registered new interface driver usbfs
- [ 8.656804] usbcore: registered new interface driver hub
- [ 8.662026] usbcore: registered new device driver usb
- [ 8.667688] Linux video capture interface: v2.00
- [ 8.671881] [ARISC] :sunxi-arisc driver v1.10
- [ 8.682861] [ARISC] :sunxi-arisc driver v1.10 startup succeeded
- [ 8.683421] Advanced Linux Sound Architecture Driver Initialized.
- [ 8.689563] NetLabel: Initializing
- [ 8.692441] NetLabel: domain hash size = 128
- [ 8.696705] NetLabel: protocols = UNLABELED CIPSOv4
- [ 8.701621] NetLabel: unlabeled traffic allowed by default
- [ 8.707197] [pm]aw_pm_init!
- [ 8.709825] rtc physical base = 0x0000000001f00000 .
- [ 8.714745] np name = /soc@01c00000/rtc@01f00000.
- [ 8.719392] base = ffffff8000068100, len = 4.
- [ 8.723655] pmu name: pmu0 .
- [ 8.726509] pmu0_enable = 0x1.
- [ 8.729538] pmux_id = 0x6.
- [ 8.732267] pmux_twi_id = 0x1.
- [ 8.735336] pmux_twi_addr = 0x34.
- [ 8.738669] pmu name: pmu1 .
- [ 8.741530] Warning: can not find np for pmu1.
- [ 8.746157] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
- [ 8.752148] after inited: sys_mask config = 0x4a55.
- [ 8.756848] Warning: can not find np for dynamic_standby_para.
- [ 8.762776] [pm]valid
- [ 8.764841] [pm]valid
- [ 8.767058] Notice: sun9i&sun8iw5&sun50i not need support normal standby, change to super standby.
- [ 8.776505] Switching to clocksource arch_sys_counter_ool
- [ 8.793727] AppArmor: AppArmor Filesystem Enabled
- [ 8.800938] NET: Registered protocol family 2
- [ 8.801822] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
- [ 8.807012] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
- [ 8.813661] TCP: Hash tables configured (established 16384 bind 16384)
- [ 8.819740] TCP: reno registered
- [ 8.822813] UDP hash table entries: 1024 (order: 3, 32768 bytes)
- [ 8.828731] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- [ 8.835257] NET: Registered protocol family 1
- [ 8.839620] RPC: Registered named UNIX socket transport module.
- [ 8.845070] RPC: Registered udp transport module.
- [ 8.849662] RPC: Registered tcp transport module.
- [ 8.854276] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 8.861957] kvm [1]: interrupt-controller@1c84000 IRQ25
- [ 8.866089] kvm [1]: timer IRQ27
- [ 8.868858] kvm [1]: Hyp mode initialized successfully
- [ 8.875701] lock super standby defaultly!
- [ 8.877814] lookup_scene_lock_name: new scene lock super_standby
- [ 8.883707] scene_lock_init name=super_standby
- [ 8.888040] scene_lock: super_standby, type 5, count 1
- [ 8.893524] audit: initializing netlink socket (disabled)
- [ 8.898418] type=2000 audit(0.470:1): initialized
- [ 8.903722] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 8.909674] VFS: Disk quotas dquot_6.5.2
- [ 8.913134] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 8.920353] NFS: Registering the id_resolver key type
- [ 8.924330] Key type id_resolver registered
- [ 8.928375] Key type id_legacy registered
- [ 8.932321] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 8.938685] NTFS driver 2.1.30 [Flags: R/W].
- [ 8.942909] fuse init (API version 7.22)
- [ 8.946738] msgmni has been set to 3978
- [ 8.951306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 8.957653] io scheduler noop registered
- [ 8.961519] io scheduler deadline registered
- [ 8.965587] io scheduler cfq registered (default)
- [ 8.971211] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 8.976068] sw_console_setup()1173 - console setup baud 115200 parity n bits 8, flow n
- [ 8.983892] console [ttyS0] enabled, bootconsole disabled
- [ 8.983892] console [ttyS0] enabled, bootconsole disabled
- [ 8.995699] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 9.007551] misc dump reg init
- [ 9.011043] [drm] Initialized drm 1.1.0 20060810
- [ 9.020631] brd: module loaded
- [ 9.026314] loop: module loaded
- [ 9.030081] sunxi-bt bt.24: Missing bt_power.
- [ 9.034845] sunxi-bt bt.24: bt_power_name ((null))
- [ 9.040115] sunxi-bt bt.24: io_regulator_name (vcc-wifi-io)
- [ 9.046246] sunxi-bt bt.24: bt_rst gpio=356 mul-sel=1 pull=-1 drv_level=-1 data=0
- [ 9.054864] sunxi-bt bt.24: clk not config
- [ 9.059416] sunxi-bt bt.24: block state already is 1
- [ 9.065060] sunxi-wlan wlan.23: wlan_busnum (1)
- [ 9.070022] sunxi-wlan wlan.23: Missing wlan_power.
- [ 9.075351] sunxi-wlan wlan.23: wlan_power_name ((null))
- [ 9.081165] sunxi-wlan wlan.23: io_regulator_name (vcc-wifi-io)
- [ 9.087658] sunxi-wlan wlan.23: wlan_regon gpio=354 mul-sel=1 pull=-1 drv_level=-1 data=0
- [ 9.097002] sunxi-wlan wlan.23: wlan_hostwake gpio=355 mul-sel=6 pull=-1 drv_level=-1 data=0
- [ 9.106628] sunxi-wlan wlan.23: clk not config
- [ 9.112134] tun: Universal TUN/TAP device driver, 1.6
- [ 9.117666] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 9.124682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 9.131971] get ehci0-controller, regulator_io is no nocare
- [ 9.138329] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b53958, 0x:ffffff8000094000, irq_no:68
- [ 9.151733] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 9.161648] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 1
- [ 9.171470] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0004b7d70
- [ 9.194813] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
- [ 9.202835] hub 1-0:1.0: USB hub found
- [ 9.206955] hub 1-0:1.0: 1 port detected
- [ 9.211381] [ehci0-controller]: sunxi_usb_disable_ehci
- [ 9.217012] [sunxi-ehci0]: remove, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b53958
- [ 9.227302] sunxi-ehci 1c1a000.ehci0-controller: remove, state 1
- [ 9.233875] usb usb1: USB disconnect, device number 1
- [ 9.239919] sunxi-ehci 1c1a000.ehci0-controller: USB bus 1 deregistered
- [ 9.247430] get ehci1-controller, regulator_io is no nocare
- [ 9.253580] [sunxi-ehci1]: probe, pdev->name: 1c1b000.ehci1-controller, sunxi_ehci: 0xffffffc000b53ba8, 0x:ffffff800009a000, irq_no:6a
- [ 9.266847] sunxi-ehci 1c1b000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 9.276761] sunxi-ehci 1c1b000.ehci1-controller: new USB bus registered, assigned bus number 1
- [ 9.286498] sunxi-ehci 1c1b000.ehci1-controller: irq 106, io mem 0xffffffc0004b7d70
- [ 9.312890] sunxi-ehci 1c1b000.ehci1-controller: USB 0.0 started, EHCI 1.00
- [ 9.320503] ehci_irq: highspeed device connect
- [ 9.325441] hub 1-0:1.0: USB hub found
- [ 9.329545] hub 1-0:1.0: 1 port detected
- [ 9.334174] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 9.341088] get ohci0-controller, regulator_io is no nocare
- [ 9.347232] hci: request ohci0-controller gpio:1027
- [ 9.352574] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b534b8
- [ 9.362931] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 9.372462] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 2
- [ 9.381916] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x7300731073a076f
- [ 9.445108] hub 2-0:1.0: USB hub found
- [ 9.449213] hub 2-0:1.0: 1 port detected
- [ 9.453632] [ohci0-controller]: sunxi_usb_disable_ohci
- [ 9.459248] [sunxi-ohci0]: remove, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b534b8
- [ 9.469534] sunxi-ohci 1c1a000.ohci0-controller: remove, state 1
- [ 9.476120] usb usb2: USB disconnect, device number 1
- [ 9.481962] sunxi-ohci 1c1a000.ohci0-controller: USB bus 2 deregistered
- [ 9.489426] get ohci1-controller, regulator_io is no nocare
- [ 9.495564] hci: request ohci1-controller gpio:38
- [ 9.500719] [sunxi-ohci1]: probe, pdev->name: 1c1b000.ohci1-controller, sunxi_ohci: 0xffffffc000b53708
- [ 9.510948] sunxi-ohci 1c1b000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 9.520478] sunxi-ohci 1c1b000.ohci1-controller: new USB bus registered, assigned bus number 2
- [ 9.529982] sunxi-ohci 1c1b000.ohci1-controller: irq 107, io mem 0x7380733073a076f
- [ 9.592670] hub 2-0:1.0: USB hub found
- [ 9.596772] hub 2-0:1.0: 1 port detected
- [ 9.601456] usbcore: registered new interface driver usb-storage
- [ 9.608048] usbcore: registered new interface driver ums-alauda
- [ 9.614552] usbcore: registered new interface driver ums-cypress
- [ 9.621156] usbcore: registered new interface driver ums-datafab
- [ 9.627738] usbcore: registered new interface driver ums_eneub6250
- [ 9.634522] usbcore: registered new interface driver ums-freecom
- [ 9.641115] usbcore: registered new interface driver ums-isd200
- [ 9.647613] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
- [ 9.654988] usbcore: registered new interface driver ums-jumpshot
- [ 9.661676] usbcore: registered new interface driver ums-karma
- [ 9.668078] usbcore: registered new interface driver ums-onetouch
- [ 9.674772] usbcore: registered new interface driver ums-realtek
- [ 9.681367] usbcore: registered new interface driver ums-sddr09
- [ 9.687865] usbcore: registered new interface driver ums-sddr55
- [ 9.694352] usbcore: registered new interface driver ums-usbat
- [ 9.700842] usbcore: registered new interface driver usbserial
- [ 9.707248] usbcore: registered new interface driver usbserial_generic
- [ 9.714399] usbserial: USB Serial support registered for generic
- [ 9.721187] mousedev: PS/2 mouse device common for all mice
- [ 9.727764] input: sunxi-keyboard as /devices/virtual/input/input0
- [ 9.735045] sunxi-rtc 1f00000.rtc: rtc core: registered rtc-sunxi as rtc0
- [ 9.742498] sunxi-rtc 1f00000.rtc: RTC enabled
- [ 9.747561] i2c /dev entries driver
- [ 9.785806] input: axp81x-supplyer as /devices/platform/axp81x_board/axp81x-supplyer.47/input/input1
- [ 9.797456] hub 1-1:1.0: USB hub found
- [ 9.799440] sunxi budget cooling probe start !
- [ 9.799467] CPU freq cooling register Success
- [ 9.799487] CPU hotplug cooling register Success
- [ 9.799575] CPU budget cooling register Success
- [ 9.799803] sunxi gpu cooling probe start !
- [ 9.799811] CPU gpu cooling register Success
- [ 9.830966] hub 1-1:1.0: 4 ports detected
- [ 9.833303] cpuidle: using governor ladder
- [ 9.833306] cpuidle: using governor menu
- [ 9.834016] sunxi-mmc 1c0f000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jul 21 2017 at 08:43:08
- [ 9.834047] sunxi-mmc 1c0f000.sdmmc: regulator prop vmmc,str vcc-sdcv
- [ 9.834052] sunxi-mmc 1c0f000.sdmmc: regulator prop vqmmc,str vcc-sdcvq33
- [ 9.834058] sunxi-mmc 1c0f000.sdmmc: regulator prop vdmmc,str vcc-sdc
- [ 9.834115] sunxi-mmc 1c0f000.sdmmc: No vmmc regulator found
- [ 9.834118] sunxi-mmc 1c0f000.sdmmc: No vqmmc regulator found
- [ 9.891335] sunxi-mmc 1c0f000.sdmmc: Got CD GPIO #166.
- [ 9.897087] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 9.908057] sunxi-mmc 1c0f000.sdmmc: no vqmmc,Check if there is regulator
- [ 9.932807] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 9.962333] sunxi-mmc 1c0f000.sdmmc: base:0xffffff80000ae000 irq:92
- [ 9.969568] sunxi-mmc 1c10000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jul 21 2017 at 08:43:08
- [ 9.982435] sunxi-mmc 1c10000.sdmmc: Can't get vmmc regulator string
- [ 9.989384] sunxi-mmc 1c10000.sdmmc: Can't get vqmmc regulator string
- [ 9.996434] sunxi-mmc 1c10000.sdmmc: Can't get vdmmc regulator string
- [ 10.003481] get() with no identifier
- [ 10.007388] get() with no identifier
- [ 10.011291] get() with no identifier
- [ 10.015206] sunxi-mmc 1c10000.sdmmc: No vmmc regulator found
- [ 10.021399] sunxi-mmc 1c10000.sdmmc: No vqmmc regulator found
- [ 10.027681] sunxi-mmc 1c10000.sdmmc: No vdmmc regulator found
- [ 10.034394] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.045357] sunxi-mmc 1c10000.sdmmc: no vqmmc,Check if there is regulator
- [ 10.061538] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
- [ 10.069011] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 52, RTO !!
- [ 10.070566] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.087110] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.090249] sunxi-mmc 1c10000.sdmmc: base:0xffffff80000b6000 irq:93
- [ 10.090736] sunxi-mmc 1c11000.sdmmc: SD/MMC/SDIO Host Controller Driver(v0.20 2015-7-13 16:28) Compiled in Jul 21 2017 at 08:43:08
- [ 10.090760] sunxi-mmc 1c11000.sdmmc: regulator prop vmmc,str vcc-emmcv
- [ 10.090765] sunxi-mmc 1c11000.sdmmc: regulator prop vqmmc,str vcc-emmcvq18
- [ 10.090769] sunxi-mmc 1c11000.sdmmc: regulator prop vdmmc,str none
- [ 10.090812] sunxi-mmc 1c11000.sdmmc: No vmmc regulator found
- [ 10.090815] sunxi-mmc 1c11000.sdmmc: No vqmmc regulator found
- [ 10.090818] sunxi-mmc 1c11000.sdmmc: No vdmmc regulator found
- [ 10.158676] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.160855] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.162985] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
- [ 10.163793] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
- [ 10.164603] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
- [ 10.165412] sunxi-mmc 1c0f000.sdmmc: smc 0 p0 err, cmd 5, RTO !!
- [ 10.166040] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.166080] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.168449] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.195810] mmc0: host does not support reading read-only switch. assuming write-enable.
- [ 10.197598] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
- [ 10.197637] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 1 timing SD-HS(SDR25) dt B
- [ 10.197735] sunxi-mmc 1c0f000.sdmmc: sdc set ios: clk 50000000Hz bm PP pm ON vdd 16 width 4 timing SD-HS(SDR25) dt B
- [ 10.197755] mmc0: new high speed SDHC card at address 59b4
- [ 10.238195] usb 1-1.1: new low-speed USB device number 3 using sunxi-ehci
- [ 10.298148] mmcblk0: mmc0:59b4 BA1MW 14.8 GiB
- [ 10.304064] mmcblk0: p1
- [ 10.307992] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
- [ 10.315457] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 52, RTO !!
- [ 10.322167] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.326403] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.336254] sunxi-mmc 1c11000.sdmmc: base:0xffffff80000be000 irq:94
- [ 10.336807] usbcore: registered new interface driver usbhid
- [ 10.336809] usbhid: USB HID core driver
- [ 10.362781] usbcore: registered new interface driver snd-usb-audio
- [ 10.364660] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.366480] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 8, RTO !!
- [ 10.367286] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 10.368088] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 10.368890] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 10.369692] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 5, RTO !!
- [ 10.370499] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 10.371303] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 10.372108] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 10.372910] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 55, RTO !!
- [ 10.372924] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.373755] sunxi-mmc 1c10000.sdmmc: smc 1 p1 err, cmd 1, RTO !!
- [ 10.373769] sunxi-mmc 1c10000.sdmmc: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
- [ 10.375639] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 52, RTO !!
- [ 10.376447] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 52, RTO !!
- [ 10.376460] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.378839] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.380661] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 8, RTO !!
- [ 10.381470] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 5, RTO !!
- [ 10.382282] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 5, RTO !!
- [ 10.383089] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 5, RTO !!
- [ 10.383896] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 5, RTO !!
- [ 10.384705] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 55, RTO !!
- [ 10.385515] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 55, RTO !!
- [ 10.386324] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 55, RTO !!
- [ 10.387134] sunxi-mmc 1c11000.sdmmc: smc 2 p2 err, cmd 55, RTO !!
- [ 10.387147] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
- [ 10.387494] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.387534] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.387573] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.389942] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm OD pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.425937] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 1 timing LEGACY(SDR12) dt B
- [ 10.439799] mmc2: BKOPS_EN bit is not set
- [ 10.638387] sun50i-pinctrl 1c20800.pinctrl: unknown pin PL11
- [ 10.644644] sun50i-pinctrl 1c20800.pinctrl: unknown pin PL10
- [ 10.645013] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 8 timing LEGACY(SDR12) dt B
- [ 10.662285] pinctrl core: failed to register map aif2-default (2): invalid type given
- [ 10.662591] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 400000Hz bm PP pm ON vdd 16 width 8 timing MMC-HS200 dt B
- [ 10.662640] sunxi-mmc 1c11000.sdmmc: sdc set ios: clk 100000000Hz bm PP pm ON vdd 16 width 8 timing MMC-HS200 dt B
- [ 10.693539] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
- [ 10.706271] mmc2: new HS200 MMC card at address 0001
- [ 10.706685] hid-generic 0003:258A:000C.0001: input: USB HID v1.10 Keyboard [HAILUCK CO.,LTD USB KEYBOARD] on usb-sunxi-ehci-1.1/input0
- [ 10.725463] mmcblk1: mmc2:0001 NCard 14.4 GiB
- [ 10.730745] mmcblk1boot0: mmc2:0001 NCard partition 1 4.00 MiB
- [ 10.737517] mmcblk1boot1: mmc2:0001 NCard partition 2 4.00 MiB
- [ 10.742928] input: HAILUCK CO.,LTD USB KEYBOARD as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.1/1-1.1:1.1/input/input3
- [ 10.743357] hid-generic 0003:258A:000C.0002: input,hiddev0: USB HID v1.10 Mouse [HAILUCK CO.,LTD USB KEYBOARD] on usb-sunxi-ehci-1.1/input1
- [ 10.770806] sunxi-codec-machine sound.6: codec-aif1 <-> 1c22c00.i2s0-controller mapping ok
- [ 10.772750] mmcblk1: p1 p2
- [ 10.783334] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok
- [ 10.791072] sunxi-codec-machine sound.6: codec-aif2 <-> bb-dai mapping ok
- [ 10.798766] sunxi-codec-machine sound.6: codec-aif3 <-> bb-dai mapping ok
- [ 10.807344] input: audiocodec sunxi Audio Jack as /devices/soc.0/sound.6/sound/card0/input4
- [ 10.810152] mmcblk1boot1: unknown partition table
- [ 10.818766] usb 1-1.3: new high-speed USB device number 4 using sunxi-ehci
- [ 10.830867] mmcblk1boot0: unknown partition table
- [ 10.830970] sndhdmi sound.7: sndhdmi <-> 1c22800.daudio mapping ok
- [ 10.843228] TCP: cubic registered
- [ 10.846925] NET: Registered protocol family 10
- [ 10.852647] sit: IPv6 over IPv4 tunneling driver
- [ 10.858113] NET: Registered protocol family 17
- [ 10.863024] 8021q: 802.1Q VLAN Support v1.8
- [ 10.867652] Key type dns_resolver registered
- [ 10.872595] Registering SWP/SWPB emulation handler
- [ 10.878206] registered taskstats version 1
- [ 10.883626] Key type encrypted registered
- [ 10.888037] AppArmor: AppArmor sha1 policy hashing enabled
- [ 10.894972] sunxi-rtc 1f00000.rtc: setting system clock to 2017-08-02 09:29:41 UTC (1501666181)
- [ 10.905371] input: sunxi-ths as /devices/virtual/input/input5
- [ 10.911837] thermal thermal_zone0: failed to read out thermal zone 0
- [ 10.919181] [dramfreq] 408000KHz->552000KHz start
- [ 10.924323] [dramfreq] ERR:dramfreq_vbtime_ops is not initialized!
- [ 10.931192] ALSA device list:
- [ 10.934435] #0: audiocodec
- [ 10.937617] #1: sndhdmi
- [ 10.940814] md: Waiting for all devices to be available before autodetect
- [ 10.948282] md: If you don't use raid, use raid=noautodetect
- [ 10.955007] md: Autodetecting RAID arrays.
- [ 10.959529] md: Scanned 0 and added 0 devices.
- [ 10.964419] md: autorun ...
- [ 10.967732] md: ... autorun DONE.
- [ 10.972827] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
- [ 10.982566] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
- [ 11.008598] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 11.017502] VFS: Mounted root (ext4 filesystem) on device 179:1.
- [ 11.032419] devtmpfs: mounted
- [ 11.035934] Freeing unused kernel memory: 516K (ffffffc0009ab000 - ffffffc000a2c000)
- [ 11.466646] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.509459] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 11.529561] systemd[1]: Detected architecture arm64.
- Welcome to Netrunner Core 17.06 - Daedalus!
- [ 11.557340] systemd[1]: Set hostname to <live-pc>.
- [ 11.989287] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ 12.019526] systemd[1]: Created slice User and Session Slice.
- [ OK ] Created slice User and Session Slice.
- [ 12.049144] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ OK ] Set up automount Arbitrary ExecutabâŠrmats File System Automount Point.
- [ 12.078272] systemd[1]: Listening on udev Control Socket.
- [ OK ] Listening on udev Control Socket.
- [ 12.107743] systemd[1]: Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket (/dev/log).
- [ 12.137240] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ 12.166623] systemd[1]: Reached target User and Group Name Lookups.
- [ OK ] Reached target User and Group Name Lookups.
- [ 12.196215] systemd[1]: Listening on udev Kernel Socket.
- [ OK ] Listening on udev Kernel Socket.
- [ 12.225635] systemd[1]: Reached target Swap.
- [ OK ] Reached target Swap.
- [ 12.245696] systemd[1]: Listening on Journal Socket.
- [ OK ] Listening on Journal Socket.
- [ 12.265231] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ 12.294504] systemd[1]: Reached target Encrypted Volumes.
- [ OK ] Reached target Encrypted Volumes.
- [ 12.324420] systemd[1]: Created slice System Slice.
- [ OK ] Created slice System Slice.
- [ 12.348717] systemd[1]: Starting Load Kernel Modules...
- Starting Load Kernel Modules...
- [ 12.373531] systemd[1]: Started live-tools - System Support Scripts.
- [ OK ] Started live-tools - System Support Scripts.
- [ 12.388777] ppdev: user-space parallel port driver
- [ 12.405261] Loading iSCSI transport class v2.0-870.
- [ 12.406122] systemd[1]: Starting Remount Root and Kernel File Systems...
- Starting Remount Root and Kernel File Systems...
- [ 12.433219] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 12.434116] iscsi: registered transport (tcp)
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ 12.462722] systemd[1]: Created slice system-getty.slice.
- [ OK ] Created slice system-getty.slice.
- [ 12.491900] systemd[1]: Reached target Slices.
- [ OK ] Reached target Slices.
- [ 12.503744] [drm:sunxi_drm_load] *ERROR* [dengbo] debug from here
- [ 12.512506] [drm:sunxi_display_init] *ERROR* unable to map dsi registers
- [ 12.519842] [drm:sunxi_drm_load] *ERROR* failed to initialize sunxi drm dev.
- [ 12.527846] sunxi-drm: probe of sunxi-drm failed with error 11005952
- [ 12.540883] systemd[1]: Starting Set the console keyboard layout...
- Starting Set the console keyboard layout...
- [ 12.572650] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- Starting Create list of required stâŠce nodes for the current kernel...
- [ 12.602126] systemd[1]: Mounting Huge Pages File System...
- Mounting Huge Pages File System...
- [ 12.629662] systemd[1]: Listening on Syslog Socket.
- [ OK ] Listening on Syslog Socket.
- [ 12.651555] systemd[1]: Starting Journal Service...
- Starting Journal Service...
- [ 12.671615] systemd[1]: Mounting Debug File System...
- Mounting Debug File System...
- [ 12.700572] systemd[1]: Mounting POSIX Message Queue File System...
- Mounting POSIX Message Queue File System...
- [ 12.732356] systemd[1]: Mounted Debug File System.
- [ OK ] Mounted Debug File System.
- [ 12.747088] hci: ERR: sunxi_ehci is disable, can not disable again
- [ 12.753883] hci: ERR: sunxi_ohci is disable, can not disable again
- [ 12.760839] [ehci0-controller]: sunxi_usb_enable_ehci
- [ 12.761099] systemd[1]: Mounted Huge Pages File System.
- [ 12.772210] [sunxi-ehci0]: probe, pdev->name: 1c1a000.ehci0-controller, sunxi_ehci: 0xffffffc000b53958, 0x:ffffff8000094000, irq_no:68
- [ OK [ 12.785734] sunxi-ehci 1c1a000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- ] Mounted Huge Pages File System[ 12.797108] sunxi-ehci 1c1a000.ehci0-controller: new USB bus registered, assigned bus number 3
- .
- [ 12.810179] sunxi-ehci 1c1a000.ehci0-controller: irq 104, io mem 0xffffffc0001b3c40
- [ 12.826159] systemd[1]: Mounted POSIX Message Queue File System.
- [ OK ] Mounted POSIX Message Queue Fi[ 12.835631] sunxi-ehci 1c1a000.ehci0-controller: USB 0.0 started, EHCI 1.00
- le System.
- [ 12.845473] hub 3-0:1.0: USB hub found
- [ 12.850016] hub 3-0:1.0: 1 port detected
- [ 12.854501] [ohci0-controller]: sunxi_usb_enable_ohci
- [ 12.860075] [sunxi-ohci0]: probe, pdev->name: 1c1a000.ohci0-controller, sunxi_ohci: 0xffffffc000b534b8
- [ 12.870347] sunxi-ohci 1c1a000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 12.871132] systemd[1]: Started Journal Service.
- [ 12.885365] sunxi-ohci 1c1a000.ohci0-controller: new USB bus registered, assigned bus number 4
- [ OK [ 12.894968] sunxi-ohci 1c1a000.ohci0-controller: irq 105, io mem 0x00380000
- ] Started Journal Service.
- [FAILED] Failed to start Load Kernel Modules.
- See 'systemctl status systemd-modules-load.service' for details.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ 12.959452] hub 4-0:1.0: USB hub found
- [ 12.965641] hub 4-0:1.0: 1 port detected
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Create list of required staâŠvice nodes for the current kernel.
- Starting Create Static Device Nodes in /dev...
- Starting Initial Check File System Quotas...
- Starting udev Coldplug all Devices...
- Starting Load/Save Random Seed...
- Starting Apply Kernel Variables...
- Mounting Configuration File System...
- Mounting FUSE Control File System...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Mounted Configuration File System.
- [ OK ] Mounted FUSE Control File System.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Apply Kernel Variables.
- [ 13.308956] systemd-journald[159]: Received request to flush runtime journal from PID 1
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting live-config contains the c⊠boot process (late userspace)....
- Starting Raise network interfaces...
- Starting Set console font and keymap...
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Set console font and keymap.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- [ OK ] Started Initial Check File System Quotas.
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Time Synchronization...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Raise network interfaces.
- [ OK ] Started live-config contains the coâŠhe boot process (late userspace)..
- Starting udev Kernel Device Manager...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Listening on UUID daemon activation socket.
- [ OK ] Started CUPS Scheduler.
- [ OK ] Reached target Paths.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Listening on CUPS Scheduler.
- [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Reached target Sockets.
- [ 14.452272] Mali: Set gpu frequency to 456 MHz
- [ 14.457234] Mali: Init Mali gpu clocks successfully
- [ OK ] Reached target Basic System.
- [ 14.474926] gpu cooling callback register Success
- [ 14.481365] Mali: Mali device driver loaded
- [ 14.492868] sunxi cedar version 0.1
- [ 14.497053] [cedar]: install start!!!
- [ 14.501882] ycy the get irq is 90
- [ OK ] Started Regu[ 14.507689] ycy clk_bass_vir 0x18 is ffffff800099e018, the value:3006207
- lar background program processin[ 14.517111] ycy clk_bass_vir 0x13c is ffffff800099e13c, the value:0
- g daemon.
- [ 14.526337] ycy clk_bass_vir 0x64 is ffffff800099e064, the value:601808
- [ 14.535689] ycy clk_bass_vir 0x2c4 is ffffff800099e2c4, the value:601c08
- [ 14.543628] ycy clk_bass_vir 0x100 is ffffff800099e100, the value:0
- Starting RealtimeKit Sc[ 14.555357] [cedar]: install end!!!
- heduling Policy Service...
- [ 14.572131] [VFE]cci probe end cci_sel = 0!
- [ 14.577179] [VFE]cci_init end
- Starting Accounts Service...
- [ OK ] Started CUPS Scheduler.
- Starting Modem Manager...
- Starting Initialize hardware monitoring sensors...
- [ 14.661694] [VFE]Welcome to Video Front End driver
- [ 14.667631] [VFE]csi probe end csi_sel = 0!
- [ 14.672622] [VFE]csi_init end
- [ 14.677242] [VFE]isp probe start isp_sel = 0!
- Starting System Logging Service...
- [ 14.700956] [ISP] isp platform_id = 3!
- [ 14.705106] [VFE]isp probe end isp_sel = 0!
- [ 14.710581] [VFE]sunxi_isp_platform_register end
- Starting Initializes zram swapin[ 14.718382] [VFE]mipi probe start mipi_sel = 0!
- g...
- [ 14.724596] [VFE]mipi probe end mipi_sel = 0!
- [ 14.731048] [VFE]mipi_init end
- [ 14.734433] [VFE]flash_init end
- Starting Restore /etc/resolv.conf iâŠfore the ppp link was shut down...
- [ 14.755458] [VFE]pdev->id = 0
- [ 14.759220] [VFE]dev->vip_sel = 0
- [ 14.762947] [VFE_WARN]fetch csi0_dev0_twi_id from device_tree failed
- [ 14.770730] [VFE_WARN]fetch csi0_dev0_afvdd from device_tree failed
- [ 14.778451] [VFE_WARN]fetch csi0_dev0_afvdd_vol from device_tree failed
- [ OK ] Started D-Bus System Message B[ 14.787856] [VFE_WARN]fetch csi0_dev0_power_en from device_tree failed
- us.
- [ 14.799946] [VFE_WARN]fetch csi0_dev0_flash_en from device_tree failed
- [ 14.807506] [VFE_WARN]fetch csi0_dev0_flash_mode from device_tree failed
- [ 14.815582] [VFE_WARN]fetch csi0_dev0_af_pwdn from device_tree failed
- [ 14.823740] [VFE]probe_work_handle start!
- [ 14.828837] [VFE]vfe_init end
- [ 14.828897] [VFE]vfe_runtime_resume
- [ 14.840918] [VFE]..........................vfe clk open!.......................
- [ 14.850138] [VFE_WARN]vfe dphy clock is null
- [ 14.855904] [VFE]v4l2 subdev register input_num = 0
- [ 14.861908] [VFE]vfe sensor detect start! input_num = 0
- [ 14.862726] gpu cooling callback set freq limit 0
- [ 14.886689] [VFE_WARN]NOT found this item: bf3703, you can add this sensor in the sensor_list_t!
- [ 14.906162] [VFE]Sub device register "bf3703" i2c_addr = 0x3e start!
- [ 14.913712] [VFE_ERR]Error registering v4l2 subdevice No such device!
- [ 14.921406] [VFE_ERR]vfe sensor register check error at input_num = 0
- [ 14.928873] [VFE]V4L2 device registered as (null)
- [ 14.934432] [VFE]vfe_runtime_suspend
- [ 14.940675] [VFE]..........................vfe clk close!.......................
- [ 14.956366] [VFE]probe_work_handle end!
- [ 15.153020] zram: module is from the staging directory, the quality is unknown, you have been warned.
- [ 15.169563] zram: Created 4 device(s) ...
- [ 15.475892] Adding 254692k swap on /dev/zram0. Priority:5 extents:1 across:254692k SS
- [ 15.508471] Adding 254692k swap on /dev/zram1. Priority:5 extents:1 across:254692k SS
- [ 15.544384] Adding 254692k swap on /dev/zram2. Priority:5 extents:1 across:254692k SS
- [ 15.548165] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:037c)
- [ 15.552712] input: USB 2.0 PC Cam as /devices/soc.0/1c1b000.ehci1-controller/usb1/1-1/1-1.3/1-1.3:1.0/input/input6
- [ 15.553458] usbcore: registered new interface driver uvcvideo
- [ 15.553460] USB Video Class driver (1.1.1)
- [ 15.604903] Adding 254692k swap on /dev/zram3. Priority:5 extents:1 across:254692k SS
- [ OK ] Started RealtimeKit Scheduling Policy Service.
- Starting Network Manager...
- Starting Save/Restore Sound Card State...
- Starting Avahi mDNS/DNS-SD Stack...
- Starting Login Service...
- [ OK ] Started System Logging Service.
- [ OK ] Started Initializes zram swaping.
- [ OK ] Started Restore /etc/resolv.conf ifâŠbefore the ppp link was shut down.
- [ OK ] Started Initialize hardware monitoring sensors.
- [ OK ] Found device /dev/ttyS0.
- [ OK ] Started Avahi mDNS/DNS-SD Stack.
- [ OK ] Started Make remote CUPS printers available locally.
- Starting Authorization Manager...
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ OK ] Reached target Sound Card.
- [ OK ] Started Login Service.
- Starting Load/Save RF Kill Switch Status...
- [ 16.139560] sunxi-bt bt.24: block state already is 1
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ 16.226102] alsactl[383]: syscall 279
- [ 16.230677] alsactl[382]: syscall 279
- [ 16.234802] Code: aa0503e4 aa0603e5 aa0703e6 d4000001 (b13ffc1f)
- [ 16.234807] Code: aa0503e4 aa0603e5 aa0703e6 d4000001 (b13ffc1f)
- [ 16.234823] CPU: 3 PID: 383 Comm: alsactl Tainted: G C O 3.10.105-bsp-1.2-ayufan-86 #1
- [ 16.234828] task: ffffffc077730040 ti: ffffffc074940000 task.ti: ffffffc074940000
- [ 16.234851] PC is at 0x7f7a2ce5b4
- [ 16.234854] LR is at 0x7f7a150484
- [ 16.234857] pc : [<0000007f7a2ce5b4>] lr : [<0000007f7a150484>] pstate: 60000000
- [ 16.234858] sp : 0000007fd2c8a860
- [ 16.234863] x29: 0000007fd2c8a870 x28: 000000556ce2ad50
- [ 16.234867] x27: 000000556ce514e0 x26: 0000000000000000
- [ 16.234871] x25: 0000000000000002 x24: 0000000000001000
- [ 16.234874] x23: 00000000000001c0 x22: 0000000000000001
- [ 16.234878] x21: 0000007f7a185000 x20: 000000556ce6ebc8
- [ 16.234882] x19: 0000000004000000 x18: 0000000000000000
- [ 16.234885] x17: 0000007f7a2ce590 x16: 0000007f7a185348
- [ 16.234889] x15: 0000000000000000 x14: 0000000000000015
- [ 16.234892] x13: 666e6f632e746e65 x12: 696c632f65736c75
- [ 16.234896] x11: 0101010101010101 x10: 0000007fd2c8a750
- [ 16.234899] x9 : 0000000000000000 x8 : 0000000000000117
- [ 16.234903] x7 : 0000000000008040 x6 : 0000000000008040
- [ 16.234941] x5 : 0000000000000001 x4 : 0000000000008041
- [ 16.234945] x3 : 0000007fd2c8a780 x2 : 0000007fd2c8a7d4
- [ 16.234949] x1 : 0000000000000002 x0 : 0000007f7a162730
- [ 16.234950]
- [ 16.374973] CPU: 0 PID: 382 Comm: alsactl Tainted: G C O 3.10.105-bsp-1.2-ayufan-86 #1
- [ 16.384614] task: ffffffc076fb0ac0 ti: ffffffc074948000 task.ti: ffffffc074948000
- [ 16.392878] PC is at 0x7fb72b75b4
- [ 16.396518] LR is at 0x7fb7139484
- [ 16.400244] pc : [<0000007fb72b75b4>] lr : [<0000007fb7139484>] pstate: 60000000
- [ 16.408445] sp : 0000007fedbf8270
- [ OK [ 16.413432] x29: 0000007fedbf8280 ] Started Save/Restore Sound Carx28: 000000557e685b10 d State.
- [ 16.424394] x27: 000000557e685050 x26: 0000000000000000
- [ 16.430375] x25: 0000000000000002 x24: 0000000000001000
- [ 16.436315] x23: 00000000000001c0 x22: 0000000000000001
- [ 16.445268] x21: 0000007fb716e000 x20: 000000557e6a3518
- [ 16.451233] x19: 0000000004000000 x18: 0000000000000000
- [ 16.457125] x17: 0000007fb72b7590 x16: 0000007fb716e348
- [ 16.463009] x15: 0000000000000000 x14: 0000000000000015
- [ 16.469093] x13: 666e6f632e746e65 x12: 696c632f65736c75
- [ 16.474905] x11: 0101010101010101 x10: 0000007fedbf8160
- [ 16.480936] x9 : 0000000000000000 x8 : 0000000000000117
- [ 16.486859] x7 : 0000000000008040 x6 : 0000000000008040
- [ 16.492721] x5 : 0000000000000001 x4 : 0000000000008041
- [ 16.498781] x3 : 0000007fedbf8190 x2 : 0000007fedbf81e4
- [ 16.504615] x1 : 0000000000000002 x0 : 0000007fb714b730
- [ 16.510502]
- [ OK ] Started Authorization Manager.
- [ OK ] Started Accounts Service.
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- Starting OpenBSD Secure Shell server...
- [ OK ] Started Unattended Upgrades Shutdown.
- Starting Network Manager Wait Online...
- [ OK ] Started Modem Manager.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Started Network Manager Script Dispatcher Service.
- Starting Hostname Service...
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Hostname Service.
- [ OK ] Started Network Manager Wait Online.
- [ OK ] Reached target Network is Online.
- Starting iSCSI initiator daemon (iscsid)...
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- [ OK ] Started iSCSI initiator daemon (iscsid).
- Starting Login to default iSCSI targets...
- [ OK ] Started Login to default iSCSI targets.
- [ OK ] Reached target Remote File Systems (Pre).
- [ OK ] Reached target Remote File Systems.
- Starting LSB: disk temperature monitoring daemon...
- Starting Permit User Sessions...
- [ OK ] Started Permit User Sessions.
- [ OK ] Started LSB: disk temperature monitoring daemon.
- [ OK ] Started Getty on tty1.
- [ OK ] Started Serial Getty on ttyS0.
- [ OK ] Reached target Login Prompts.
- [ OK ] Reached target Multi-User System.
- Starting Simple Desktop Display Manager...
- [ OK ] Started Simple Desktop Display Manager.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 9 live-pc ttyS0
- live-pc login: live
- Password:
- Linux live-pc 3.10.105-bsp-1.2-ayufan-86 #1 SMP PREEMPT Fri Jul 21 08:43:13 UTC 2017 aarch64
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- live@live-pc:~$ df -h
- Filesystem Size Used Avail Use% Mounted on
- /dev/root 5.7G 3.1G 2.7G 55% /
- devtmpfs 963M 0 963M 0% /dev
- tmpfs 995M 0 995M 0% /dev/shm
- tmpfs 995M 8.9M 987M 1% /run
- tmpfs 5.0M 4.0K 5.0M 1% /run/lock
- tmpfs 995M 0 995M 0% /sys/fs/cgroup
- tmpfs 199M 0 199M 0% /run/user/1000
- live@live-pc:~$ sudo fdisk -l
- Disk /dev/mmcblk0: 14.9 GiB, 15987638272 bytes, 31225856 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Disk identifier: 0x1c4a1d3c
- Device Boot Start End Sectors Size Id Type
- /dev/mmcblk0p1 * 40960 12287999 12247040 5.9G 83 Linux
- Disk /dev/mmcblk1: 14.5 GiB, 15518924800 bytes, 30310400 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disklabel type: dos
- Disk identifier: 0xaac5ad9c
- Device Boot Start End Sectors Size Id Type
- /dev/mmcblk1p1 40960 143359 102400 50M c W95 FAT32 (LBA)
- /dev/mmcblk1p2 143360 30310399 30167040 14.4G 83 Linux
- Disk /dev/mmcblk1boot1: 4 MiB, 4194304 bytes, 8192 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk /dev/mmcblk1boot0: 4 MiB, 4194304 bytes, 8192 sectors
- Units: sectors of 1 * 512 = 512 bytes
- Sector size (logical/physical): 512 bytes / 512 bytes
- I/O size (minimum/optimal): 512 bytes / 512 bytes
- Disk /dev/zram0: 248.7 MiB, 260808704 bytes, 63674 sectors
- Units: sectors of 1 * 4096 = 4096 bytes
- Sector size (logical/physical): 4096 bytes / 4096 bytes
- I/O size (minimum/optimal): 4096 bytes / 4096 bytes
- Disk /dev/zram1: 248.7 MiB, 260808704 bytes, 63674 sectors
- Units: sectors of 1 * 4096 = 4096 bytes
- Sector size (logical/physical): 4096 bytes / 4096 bytes
- I/O size (minimum/optimal): 4096 bytes / 4096 bytes
- Disk /dev/zram2: 248.7 MiB, 260808704 bytes, 63674 sectors
- Units: sectors of 1 * 4096 = 4096 bytes
- Sector size (logical/physical): 4096 bytes / 4096 bytes
- I/O size (minimum/optimal): 4096 bytes / 4096 bytes
- Disk /dev/zram3: 248.7 MiB, 260808704 bytes, 63674 sectors
- Units: sectors of 1 * 4096 = 4096 bytes
- Sector size (logical/physical): 4096 bytes / 4096 bytes
- I/O size (minimum/optimal): 4096 bytes / 4096 bytes
- live@live-pc:~$ sudo poweroff
- Stopping Session c1 of user live.
- Stopping Session c2 of user live.
- Stopping Authorization Manager...
- [ OK ] Stopped target Graphical Interface.
- Stopping live-tools - System Support Scripts...
- Stopping RealtimeKit Scheduling Policy Service...
- Stopping User Manager for UID 1000...
- [ OK ] Stopped target Multi-User System.
- [ OK ] Stopped Initialize hardware monitoring sensors.
- Stopping LSB: disk temperature monitoring daemon...
- Stopping Unattended Upgrades Shutdown...
- Stopping System Logging Service...
- Stopping Initializes zram swaping...
- Stopping OpenBSD Secure Shell server...
- Stopping Regular background program processing daemon...
- [ OK ] Stopped target Login Prompts.
- Stopping Make remote CUPS printers available locally...
- [ OK ] Closed Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ OK ] Stopped target Sound Card.
- Stopping Accounts Service...
- Stopping Modem Manager...
- Stopping Save/Restore Sound Card State...
- Stopping Serial Getty on ttyS0...
- [ OK ] Stopped target Timers.
- [ 52.801102] alsactl[647]: syscall 279
- [ 52.805139] Code: aa0503e4 aa0603e5 aa0703e6 d4000001 (b13ffc1f)
- [ 52.812496] CPU: 2 PID: 647 Comm: alsactl Tainted: G C O 3.10.105-bsp-1.2-ayufan-86 #1
- [ 52.822542] task: ffffffc07732e040 ti: ffffffc0741f8000 task.ti: ffffffc0741f8000
- [ 52.830868] PC is at 0x7f8c90a5b4
- [ 52.834518] LR is at 0x7f8c78c484
- [ 52.838182] pc : [<0000007f8c90a5b4>] lr : [<0000007f8c78c484>] pstate: 60000000
- [ OK ] Stopped Dail[ 52.846341] sp : 0000007fe29093d0
- y apt upgrade and clean activiti[ 52.852666] x29: 0000007fe29093e0 es.
- x28: 00000055764d0d20
- [ 52.861676] x27: 00000055764f74e0 x26: 0000000000000000 [ OK
- ] Stopped Daily apt download act[ 52.870030] x25: 0000000000000002 ivities.
- x24: 0000000000001000
- [ 52.879509] x23: 00000000000001c0 x22: 0000000000000001
- [ 52.885782] x21: 0000007f8c7c1000 x20: 0000005576514bc8
- [ 52.891640] x19: 0000000004000000 x18: 0000000000000000 [ OK
- ] Stopped Daily Cleanup of Tempo[ 52.899873] x17: 0000007f8c90a590 rary Directories.
- x16: 0000007f8c7c1348
- [ 52.910115] x15: 0000000000000000 x14: 0000000000000015
- [ 52.916334] x13: 666e6f632e746e65 x12: 696c632f65736c75
- [ 52.922164] x11: 0101010101010101 x10: 0000007fe29092c0
- [ 52.927993] x9 : 0000000000000000 x8 : 0000000000000117
- [ 52.927997] x7 : 0000000000008040 x6 : 0000000000008040
- [ 52.928001] x5 : 0000000000000001 x4 : 0000000000008041
- [ 52.928007] x3 : 0000007fe29092f0 x2 : 0000007fe2909344
- [ 52.928010] x1 : 0000000000000002 x0 : 0000007f8c79e730
- [ 52.928012]
- [ OK ] Stopped target System Time Synchronized.
- Stopping Getty on tty1...
- [ OK ] Deactivated swap /dev/zram3.
- [ OK ] Deactivated swap /dev/zram2.
- [ OK ] Deactivated swap /dev/zram1.
- [ OK ] Deactivated swap /dev/zram0.
- [ OK ] Stopped Regular background program processing daemon.
- [ OK ] Stopped RealtimeKit Scheduling Policy Service.
- [ OK ] Stopped Accounts Service.
- [ OK ] Stopped Modem Manager.
- [ OK ] Stopped System Logging Service.
- [ OK ] Stopped Make remote CUPS printers available locally.
- [ OK ] Stopped Authorization Manager.
- [ OK ] Stopped OpenBSD Secure Shell server.
- [ OK ] Stopped Getty on tty1.
- [ OK ] Stopped Serial Getty on ttyS0.
- [ OK ] Stopped User Manager for UID 1000.
- [ OK ] Stopped Session c1 of user live.
- [ OK ] Stopped live-tools - System Support Scripts.
- [ OK ] Stopped Session c2 of user live.
- [ OK ] Stopped Initializes zram swaping.
- [ OK ] Stopped Save/Restore Sound Card State.
- [ OK ] Stopped LSB: disk temperature monitoring daemon.
- [ OK ] Removed slice User Slice of live.
- Stopping Login Service...
- [ OK ] Removed slice system-serial\x2dgetty.slice.
- Stopping Permit User Sessions...
- [ OK ] Removed slice system-getty.slice.
- Stopping CUPS Scheduler...
- Stopping Avahi mDNS/DNS-SD Stack...
- [ OK ] Stopped CUPS Scheduler.
- [ OK ] Stopped Avahi mDNS/DNS-SD Stack.
- [ OK ] Stopped Login Service.
- [ OK ] Stopped Unattended Upgrades Shutdown.
- [ OK ] Stopped Permit User Sessions.
- [ OK ] Stopped target Remote File Systems.
- [ OK ] Stopped target Remote File Systems (Pre).
- Stopping Login to default iSCSI targets...
- [ OK ] Stopped target User and Group Name Lookups.
- [ 53.871921] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ OK ] Stopped Login to default iSCSI targets.
- Stopping iSCSI initiator daemon (iscsid)...
- [ OK ] Stopped iSCSI initiator daemon (iscsid).
- [ OK ] Stopped target Network is Online.
- [ OK ] Stopped Network Manager Wait Online.
- [ OK ] Stopped target Network.
- Stopping Raise network interfaces...
- Stopping Network Manager...
- [ OK ] Stopped Raise network interfaces.
- [ OK ] Stopped Network Manager.
- Stopping D-Bus System Message Bus...
- [ OK ] Stopped D-Bus System Message Bus.
- [ OK ] Stopped target Basic System.
- [ OK ] Stopped target Sockets.
- [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket.
- [ OK ] Closed CUPS Scheduler.
- [ OK ] Closed UUID daemon activation socket.
- [ OK ] Closed Syslog Socket.
- [ OK ] Stopped target Slices.
- [ OK ] Removed slice User and Session Slice.
- [ OK ] Stopped target Paths.
- [ OK ] Stopped CUPS Scheduler.
- [ OK ] Closed D-Bus System Message Bus Socket.
- [ OK ] Stopped target System Initialization.
- Stopping Update UTMP about System Boot/Shutdown...
- [ OK ] Stopped Apply Kernel Variables.
- Stopping Network Time Synchronization...
- Stopping Load/Save Random Seed...
- [ OK ] Stopped target Swap.
- [ OK ] Stopped target Encrypted Volumes.
- [ OK ] Stopped Forward Password Requests to Wall Directory Watch.
- [ OK ] Stopped Dispatch Password Requests to Console Directory Watch.
- [ OK ] Stopped Network Time Synchronization.
- [ OK ] Stopped Load/Save Random Seed.
- [ OK ] Stopped Update UTMP about System Boot/Shutdown.
- [ OK ] Stopped Create Volatile Files and Directories.
- [ OK ] Stopped target Local File Systems.
- Unmounting /run/user/1000...
- [ OK ] Unmounted /run/user/1000.
- [ OK ] Reached target Unmount All Filesystems.
- [ OK ] Stopped target Local File Systems (Pre).
- [ OK ] Stopped Create Static Device Nodes in /dev.
- [ OK ] Stopped Remount Root and Kernel File Systems.
- [ OK ] Reached target Shutdown.
- [ 55.273589] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
- [ 55.290176] systemd-journald[159]: Received SIGTERM from PID 1 (systemd-shutdow).
- [ 55.354915] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
- [ 55.370694] systemd-shutdown[1]: Unmounting file systems.
- [ 55.377260] systemd-shutdown[1]: Remounting '/' read-only with options 'data=ordered'.
- [ 55.416726] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
- [ 55.431769] systemd-shutdown[1]: Remounting '/' read-only with options 'data=ordered'.
- [ 55.440607] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
- [ 55.447105] systemd-shutdown[1]: All filesystems unmounted.
- [ 55.455551] systemd-shutdown[1]: Deactivating swaps.
- [ 55.461213] systemd-shutdown[1]: All swaps deactivated.
- [ 55.466960] systemd-shutdown[1]: Detaching loop devices.
- [ 55.477909] systemd-shutdown[1]: All loop devices detached.
- [ 55.484035] systemd-shutdown[1]: Detaching DM devices.
- [ 55.489879] systemd-shutdown[1]: All DM devices detached.
- [ 55.506185] systemd-shutdown[1]: Powering off.
- [ 56.495157] drivers/cpufreq/autohotplug.c:reboot_notifier_call: stop autohotplug done
- [ 56.504609] kvm: disabling virtualization on CPU1
- [ 56.509784] CPU1: shutdown
- [ 56.512761] psci: CPU1 killed.
- [ 56.518433] kvm: disabling virtualization on CPU2
- [ 56.523606] CPU2: shutdown
- [ 56.526677] psci: CPU2 killed.
- [ 56.532419] kvm: disabling virtualization on CPU3
- [ 56.537593] CPU3: shutdown
- [ 56.540575] psci: CPU3 killed.
- [ 56.545577] drivers/cpufreq/cpufreq.c:reboot_notifier_call: stop none boot cpus done
- [ 56.554059] drivers/devfreq/sunxi_dramfreq.c:sunxi_dramfreq_reboot: stop dramfreq done
- [ 56.562733] kvm: exiting hardware virtualization
- [ 56.568252] [alarmtimer] have no shutdown alarm! alarmtimer_shutdown 330
- [ 56.576094] sunxi-mmc 1c11000.sdmmc: try to disable cache
- [ 56.582004] sunxi-mmc 1c11000.sdmmc: sunxi_mmc_do_shutdown2: mmc shutdown exit..ok
- [ 56.590335] [VFE]Defined suspend!
- [ 56.593955] [VFE]Vfe Shutdown!
- [ 56.597393] [ohci1-controller]: ohci shutdown start
- [ 56.602764] [ohci1-controller]: ohci shutdown end
- [ 56.607916] [ehci1-controller]: ehci shutdown start
- [ 56.613494] [ehci1-controller]: ehci shutdown end
- [ 56.618643] [ohci0-controller]: ohci shutdown start
- [ 56.624008] [ohci0-controller]: ohci shutdown end
- [ 56.629142] [ehci0-controller]: ehci shutdown start
- [ 56.634628] [ehci0-controller]: ehci shutdown end
- [ 56.639840] Power down.
- INFO: PSCI Affinity Map:
- INFO: AffInst: Level 2, MPID 0x0, State ON
- INFO: AffInst: Level 1, MPID 0x0, State ON
- INFO: AffInst: Level 0, MPID 0x0, State ON
- INFO: AffInst: Level 0, MPID 0x1, State OFF
- INFO: AffInst: Level 0, MPID 0x2, State OFF
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement