Advertisement
Guest User

Untitled

a guest
Feb 16th, 2017
211
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.42 KB | None | 0 0
  1. root@nanopim1:~# dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Linux version 4.10.0-rc6-337760-g0202e83-dirty (amit@amit-MacBookPro) (gcc version 6.2.0 20161005 (Ubuntu 6.2.0-5ubuntu12) ) #9 SMP Thu Feb 16 17:29:50 AEDT 2017
  4. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  5. [ 0.000000] CPU: div instructions available: patching division code
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] OF: fdt:Machine model: Allwinner R16 EVB (Parrot)
  8. [ 0.000000] Memory policy: Data cache writealloc
  9. [ 0.000000] On node 0 totalpages: 131072
  10. [ 0.000000] free_area_init_node: node 0, pgdat c095ba40, node_mem_map dfbfa000
  11. [ 0.000000] Normal zone: 1024 pages used for memmap
  12. [ 0.000000] Normal zone: 0 pages reserved
  13. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  14. [ 0.000000] psci: probing for conduit method from DT.
  15. [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
  16. [ 0.000000] percpu: Embedded 14 pages/cpu @dfbaf000 s24716 r8192 d24436 u57344
  17. [ 0.000000] pcpu-alloc: s24716 r8192 d24436 u57344 alloc=14*4096
  18. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  19. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  20. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10
  21. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  22. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. [ 0.000000] Memory: 510600K/524288K available (5120K kernel code, 368K rwdata, 1380K rodata, 1024K init, 266K bss, 13688K reserved, 0K cma-reserved, 0K highmem)
  25. [ 0.000000] Virtual kernel memory layout:
  26. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  27. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  28. vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
  29. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  30. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  31. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  32. .text : 0xc0008000 - 0xc0600000 (6112 kB)
  33. .init : 0xc0800000 - 0xc0900000 (1024 kB)
  34. .data : 0xc0900000 - 0xc095c340 ( 369 kB)
  35. .bss : 0xc095e000 - 0xc09a08f4 ( 267 kB)
  36. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  37. [ 0.000000] Hierarchical RCU implementation.
  38. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  39. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  40. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
  41. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  42. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  43. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  44. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  45. [ 0.000017] Switching to timer-based delay loop, resolution 41ns
  46. [ 0.000151] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  47. [ 0.000459] Console: colour dummy device 80x30
  48. [ 0.000486] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  49. [ 0.000500] pid_max: default: 32768 minimum: 301
  50. [ 0.000594] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  51. [ 0.000603] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  52. [ 0.001165] CPU: Testing write buffer coherency: ok
  53. [ 0.001453] /cpus/cpu@0 missing clock-frequency property
  54. [ 0.001468] /cpus/cpu@1 missing clock-frequency property
  55. [ 0.001479] /cpus/cpu@2 missing clock-frequency property
  56. [ 0.001490] /cpus/cpu@3 missing clock-frequency property
  57. [ 0.001501] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  58. [ 0.001728] Setting up static identity map for 0x40100000 - 0x40100058
  59. [ 0.002339] smp: Bringing up secondary CPUs ...
  60. [ 0.002989] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  61. [ 0.003658] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  62. [ 0.004325] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  63. [ 0.004381] smp: Brought up 1 node, 4 CPUs
  64. [ 0.004399] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  65. [ 0.004405] CPU: All CPU(s) started in HYP mode.
  66. [ 0.004409] CPU: Virtualization extensions available.
  67. [ 0.005081] devtmpfs: initialized
  68. [ 0.010399] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  69. [ 0.010626] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  70. [ 0.010704] pinctrl core: initialized pinctrl subsystem
  71. [ 0.011490] NET: Registered protocol family 16
  72. [ 0.011756] DMA: preallocated 256 KiB pool for atomic coherent allocations
  73. [ 0.012835] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  74. [ 0.012844] hw-breakpoint: maximum watchpoint size is 8 bytes.
  75. [ 0.025052] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
  76. [ 0.025985] SCSI subsystem initialized
  77. [ 0.026183] libata version 3.00 loaded.
  78. [ 0.026392] usbcore: registered new interface driver usbfs
  79. [ 0.026446] usbcore: registered new interface driver hub
  80. [ 0.026516] usbcore: registered new device driver usb
  81. [ 0.026719] pps_core: LinuxPPS API ver. 1 registered
  82. [ 0.026726] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  83. [ 0.026745] PTP clock support registered
  84. [ 0.026943] Advanced Linux Sound Architecture Driver Initialized.
  85. [ 0.027687] clocksource: Switched to clocksource arch_sys_counter
  86. [ 0.035636] NET: Registered protocol family 2
  87. [ 0.036124] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  88. [ 0.036171] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  89. [ 0.036232] TCP: Hash tables configured (established 4096 bind 4096)
  90. [ 0.036282] UDP hash table entries: 256 (order: 1, 8192 bytes)
  91. [ 0.036316] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  92. [ 0.036475] NET: Registered protocol family 1
  93. [ 0.036823] RPC: Registered named UNIX socket transport module.
  94. [ 0.036833] RPC: Registered udp transport module.
  95. [ 0.036838] RPC: Registered tcp transport module.
  96. [ 0.036843] RPC: Registered tcp NFSv4.1 backchannel transport module.
  97. [ 0.038280] futex hash table entries: 1024 (order: 4, 65536 bytes)
  98. [ 0.038909] workingset: timestamp_bits=30 max_order=17 bucket_order=0
  99. [ 0.046742] NFS: Registering the id_resolver key type
  100. [ 0.046775] Key type id_resolver registered
  101. [ 0.046781] Key type id_legacy registered
  102. [ 0.047803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  103. [ 0.047818] io scheduler noop registered
  104. [ 0.047824] io scheduler deadline registered
  105. [ 0.047985] io scheduler cfq registered (default)
  106. [ 0.048312] sunxi-rsb 1f03400.rsb: could not find pctldev for node /soc@01c00000/pinctrl@01f02c00/r_rsb, deferring probe
  107. [ 0.048483] sun4i-usb-phy 1c19400.phy: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe
  108. [ 0.049280] sun8i-a23-r-pinctrl 1f02c00.pinctrl: Reset controller missing
  109. [ 0.052334] sun8i-a33-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  110. [ 0.105166] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  111. [ 0.107578] console [ttyS0] disabled
  112. [ 0.127751] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 35, base_baud = 1500000) is a U6_16550A
  113. [ 0.772088] console [ttyS0] enabled
  114. [ 0.776175] [drm] Initialized
  115. [ 0.781838] libphy: Fixed MDIO Bus: probed
  116. [ 0.785938] CAN device driver interface
  117. [ 0.790413] usbcore: registered new interface driver asix
  118. [ 0.795854] usbcore: registered new interface driver ax88179_178a
  119. [ 0.801994] usbcore: registered new interface driver cdc_ether
  120. [ 0.807866] usbcore: registered new interface driver net1080
  121. [ 0.813552] usbcore: registered new interface driver cdc_subset
  122. [ 0.819501] usbcore: registered new interface driver zaurus
  123. [ 0.825123] usbcore: registered new interface driver cdc_ncm
  124. [ 0.830786] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  125. [ 0.837303] ehci-platform: EHCI generic platform driver
  126. [ 0.842731] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  127. [ 0.848930] ohci-platform: OHCI generic platform driver
  128. [ 0.855234] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  129. [ 0.862054] sun6i-rtc 1f00000.rtc: RTC enabled
  130. [ 0.866661] i2c /dev entries driver
  131. [ 0.870924] IR NEC protocol handler initialized
  132. [ 0.875450] IR RC5(x/sz) protocol handler initialized
  133. [ 0.880520] IR RC6 protocol handler initialized
  134. [ 0.885042] IR JVC protocol handler initialized
  135. [ 0.889576] IR Sony protocol handler initialized
  136. [ 0.894184] IR SANYO protocol handler initialized
  137. [ 0.898890] IR Sharp protocol handler initialized
  138. [ 0.903585] IR MCE Keyboard/mouse protocol handler initialized
  139. [ 0.909418] IR XMP protocol handler initialized
  140. [ 0.914481] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  141. [ 0.922756] cpu cpu1: dev_pm_opp_of_get_sharing_cpus: Couldn't find opp node.
  142. [ 0.930216] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 2016000 KHz
  143. [ 0.937808] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 2016000000 (-34)
  144. [ 0.950555] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1200000 KHz
  145. [ 0.959679] sunxi-mmc 1c10000.mmc: could not find pctldev for node /soc@01c00000/pinctrl@01f02c00/wifi_reset_pin@0, deferring probe
  146. [ 0.972258] sun4i-ss 1c15000.crypto-engine: Die ID 5
  147. [ 0.978280] usbcore: registered new interface driver usbhid
  148. [ 0.983846] usbhid: USB HID core driver
  149. [ 0.988611] NET: Registered protocol family 17
  150. [ 0.993064] can: controller area network core (rev 20120528 abi 9)
  151. [ 0.999319] NET: Registered protocol family 29
  152. [ 1.003758] can: raw protocol (rev 20120528)
  153. [ 1.008041] can: broadcast manager protocol (rev 20161123 t)
  154. [ 1.013695] can: netlink gateway (rev 20130117) max_hops=1
  155. [ 1.019381] Key type dns_resolver registered
  156. [ 1.023718] Registering SWP/SWPB emulation handler
  157. [ 1.032544] sunxi-rsb 1f03400.rsb: could not find pctldev for node /soc@01c00000/pinctrl@01f02c00/r_rsb, deferring probe
  158. [ 1.045546] sun8i-a23-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  159. [ 1.054613] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
  160. [ 1.060662] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP223 found
  161. [ 1.069045] input: axp20x-pek as /devices/platform/soc@01c00000/1f03400.rsb/sunxi-rsb-3a3/axp20x-pek/input/input0
  162. [ 1.080663] dc1sw: supplied by vcc-3v0
  163. [ 1.084627] dc5ldo: supplied by vcc-dram
  164. [ 1.089497] vcc-1v2-hsic: Bringing 700000uV into 1200000-1200000uV
  165. [ 1.095933] vcc-dsp: Bringing 700000uV into 3000000-3000000uV
  166. [ 1.101951] eldo3: Bringing 700000uV into 3000000-3000000uV
  167. [ 1.107781] vcc-wifi0: Bringing 700000uV into 3300000-3300000uV
  168. [ 1.113981] vcc-wifi1: Bringing 700000uV into 3300000-3300000uV
  169. [ 1.120202] vcc-3v0-csi: Bringing 700000uV into 3000000-3000000uV
  170. [ 1.127603] drivevbus: supplied by vcc5v0
  171. [ 1.133088] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
  172. [ 1.139484] ehci-platform 1c1a000.usb: EHCI Host Controller
  173. [ 1.145073] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
  174. [ 1.152940] ehci-platform 1c1a000.usb: irq 28, io mem 0x01c1a000
  175. [ 1.187706] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
  176. [ 1.194458] hub 1-0:1.0: USB hub found
  177. [ 1.198243] hub 1-0:1.0: 1 port detected
  178. [ 1.202673] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
  179. [ 1.209310] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
  180. [ 1.217128] ohci-platform 1c1a400.usb: irq 29, io mem 0x01c1a400
  181. [ 1.292259] hub 2-0:1.0: USB hub found
  182. [ 1.296028] hub 2-0:1.0: 1 port detected
  183. [ 1.300509] usb_phy_generic.0.auto supply vcc not found, using dummy regulator
  184. [ 1.308064] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  185. [ 1.313807] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 3
  186. [ 1.322361] hub 3-0:1.0: USB hub found
  187. [ 1.326135] hub 3-0:1.0: 1 port detected
  188. [ 1.388363] input: 1c22800.lradc as /devices/platform/soc@01c00000/1c22800.lradc/input/input1
  189. [ 1.397714] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  190. [ 1.457702] sunxi-mmc 1c0f000.mmc: base:0xe087f000 irq:24
  191. [ 1.463778] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
  192. [ 1.514647] mmc0: host does not support reading read-only switch, assuming write-enable
  193. [ 1.524545] mmc0: new high speed SDHC card at address 59b4
  194. [ 1.530303] sunxi-mmc 1c10000.mmc: base:0xe0883000 irq:25
  195. [ 1.536504] mmcblk0: mmc0:59b4 USD 15.0 GiB
  196. [ 1.541965] mmcblk0: p1 p2
  197. [ 1.549957] sunxi-mmc 1c10000.mmc: smc 1 err, cmd 8, RTO !!
  198. [ 1.564690] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  199. [ 1.570204] usb 1-1: new high-speed USB device number 2 using ehci-platform
  200. [ 1.578395] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  201. [ 1.585392] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  202. [ 1.590905] sunxi-mmc 1c11000.mmc: base:0xe0887000 irq:26
  203. [ 1.596368] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:05 UTC (5)
  204. [ 1.604523] vcc3v0: disabling
  205. [ 1.607495] vcc3v3: disabling
  206. [ 1.610477] vcc5v0: disabling
  207. [ 1.613451] dc1sw: disabling
  208. [ 1.616717] ALSA device list:
  209. [ 1.619708] No soundcards found.
  210. [ 1.627793] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  211. [ 1.628063] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  212. [ 1.628459] sunxi-mmc 1c11000.mmc: smc 2 err, cmd 8, RTO !!
  213. [ 1.632510] sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
  214. [ 1.633329] sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
  215. [ 1.634144] sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
  216. [ 1.634959] sunxi-mmc 1c11000.mmc: smc 2 err, cmd 55, RTO !!
  217. [ 1.636713] random: fast init done
  218. [ 1.673767] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  219. [ 1.680594] sunxi-mmc 1c11000.mmc: smc 2 err, cmd 6, RE RCE !!
  220. [ 1.681497] mmc2: new DDR MMC card at address 0001
  221. [ 1.681946] mmcblk2: mmc2:0001 M4G1FB 3.64 GiB
  222. [ 1.682123] mmcblk2boot0: mmc2:0001 M4G1FB partition 1 1.00 MiB
  223. [ 1.682293] mmcblk2boot1: mmc2:0001 M4G1FB partition 2 1.00 MiB
  224. [ 1.683482] mmcblk2: p1 p2 p3 < p5 p6 p7 p8 p9 p10 >
  225. [ 1.683499] mmcblk2: p1 size 7464960 extends beyond EOD, truncated
  226. [ 1.720690] mmc1: new high speed SDIO card at address 0001
  227. [ 1.739388] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  228. [ 1.747512] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  229. [ 1.757255] devtmpfs: mounted
  230. [ 1.761162] Freeing unused kernel memory: 1024K
  231. [ 2.047147] systemd[1]: System time before build time, advancing clock.
  232. [ 2.055268] systemd[1]: Failed to insert module 'autofs4': No such file or directory
  233. [ 2.116571] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
  234. [ 2.134970] systemd[1]: Detected architecture arm.
  235. [ 2.168535] systemd[1]: Set hostname to <nanopim1>.
  236. [ 2.262671] asix 1-1:1.0 eth0: register 'asix' at usb-1c1a000.usb-1, ASIX AX88772B USB 2.0 Ethernet, 9c:eb:e8:02:19:81
  237. [ 2.556448] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  238. [ 2.587849] systemd[1]: Reached target User and Group Name Lookups.
  239. [ 2.617903] systemd[1]: Listening on udev Kernel Socket.
  240. [ 2.647790] systemd[1]: Reached target Remote File Systems (Pre).
  241. [ 2.677893] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  242. [ 2.707946] systemd[1]: Listening on Syslog Socket.
  243. [ 2.737938] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  244. [ 4.922174] asix 1-1:1.0 enx9cebe8021981: renamed from eth0
  245. [ 5.085816] systemd-journald[210]: Received request to flush runtime journal from PID 1
  246. [ 33.166739] asix 1-1:1.0 enx9cebe8021981: link up, 100Mbps, full-duplex, lpa 0xC5E1
  247. [ 95.487758] random: crng init done
  248. root@nanopim1:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement