<pre>Ok Pushing this to the REST Server so you can use it on your phone! :-) <br/><br/>File:112233445566.cfg<br/><textarea rows="50" cols="100">#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted.##



account.1.enable = 1
account.1.label = 123
account.1.display_name = 123
account.1.auth_name = 123
account.1.password =  123
account.1.user_name =  123
account.1.sip_server_host =
account.1.sip_server_port = 5060
account.1.outbound_proxy_enable = 1
account.1.outbound_host =
account.1.outbound_port = 5060
account.1.sip_listen_port = 5062
account.1.transport = 0
voice_mail.number.1 = *97
account.1.sip_server.1.expires = 3600
account.1.100rel_enable = 0
account.1.subscribe_mwi = 1
account.1.cid_source = 0
account.1.enable_user_equal_phone = 0
account.1.srtp_encryption =
account.1.ptime = 20
account.1.group_pickup_code =
account.1.direct_pickup_code = **
account.1.auto_answer = 0
account.1.missed_calllog = 0
account.1.subscribe_mwi_to_vm = 1
account.1.unregister_on_reboot = 1
account.1.nat.nat_traversal =
account.1.nat.stun_server =
account.1.nat.stun_port =
account.1.nat.udp_update_enable = 1
account.1.nat.udp_update_time = 30
account.1.nat.rport = 1
account.1.advanced.timer_t1 = 0.5
account.1.advanced.timer_t2 = 4
account.1.advanced.timer_t4 = 5
account.1.alert_info_url_enable = 1
account.1.ringtone.ring_type = Ring4.wav
account.1.dnd.on_code = *78
account.1.dnd.off_code = *79



#######################################################################################
##                  Phone Features                                                   ##
#######################################################################################

sip.rfc2543_hold = 0
sip.use_out_bound_in_dialog = 1
sip.reg_surge_prevention = 60
transfer.blind_tran_on_hook_enable = 1
transfer.on_hook_trans_enable = 1
transfer.dsskey_deal_type = 2



#######################################################################################
##                             Call Forward                                      ##
#######################################################################################

#Configure the call forward key mode; 0-Phone mode (default), 1-Custom mode.
features.fwd_mode = 0

#Enable or disable the always forward feature; 0-Disabled (default), 1-Enabled;
forward.always.enable = 0
forward.busy.enable = 0
forward.no_answer.enable = 0


linekey.1.line =
linekey.1.value =
linekey.1.pickup_value =
linekey.1.type = 15
linekey.1.xml_phonebook =
linekey.1.label =


linekey.2.line =
linekey.2.value =
linekey.2.pickup_value =
linekey.2.type = 15
linekey.2.xml_phonebook =
linekey.2.label =


linekey.3.line =
linekey.3.value =
linekey.3.pickup_value =
linekey.3.type = 15
linekey.3.xml_phonebook =
linekey.3.label =


linekey.4.line =
linekey.4.value =
linekey.4.pickup_value =
linekey.4.type = 15
linekey.4.xml_phonebook =
linekey.4.label =


linekey.5.line =
linekey.5.value =
linekey.5.pickup_value =
linekey.5.type = 15
linekey.5.xml_phonebook =
linekey.5.label =


linekey.6.line =
linekey.6.value =
linekey.6.pickup_value =
linekey.6.type = 15
linekey.6.xml_phonebook =
linekey.6.label =





programablekey.1.type = 28
programablekey.1.line = 0
programablekey.1.value =
programablekey.1.xml_phonebook =
programablekey.1.history_type = 0
programablekey.1.label =
programablekey.1.pickup_value =

programablekey.2.type = 29
programablekey.2.line = 0
programablekey.2.value =
programablekey.2.xml_phonebook =
programablekey.2.history_type = 0
programablekey.2.label =
programablekey.2.pickup_value =

programablekey.3.type = 5
programablekey.3.line = 0
programablekey.3.value =
programablekey.3.xml_phonebook =
programablekey.3.history_type = 0
programablekey.3.label =
programablekey.3.pickup_value =

programablekey.4.type = 30
programablekey.4.line = 0
programablekey.4.value =
programablekey.4.xml_phonebook =
programablekey.4.history_type = 0
programablekey.4.label =
programablekey.4.pickup_value =


#################################################
###     Physical button mappings      ###
#################################################

programablekey.5.type = 28
programablekey.5.line = 0
programablekey.5.value =
programablekey.5.pickup_value =

programablekey.6.type = 29
programablekey.6.line = 0
programablekey.6.value =
programablekey.6.pickup_value =

programablekey.7.type = 7
programablekey.7.line = 0
programablekey.7.value =
programablekey.7.pickup_value =

programablekey.8.type = 31
programablekey.8.line = 0
programablekey.8.value =
programablekey.8.pickup_value =

programablekey.9.type = 33
programablekey.9.line = 0
programablekey.9.value =
programablekey.9.pickup_value =


programablekey.10.type = 0
programablekey.10.line = 0
programablekey.10.value =
programablekey.10.pickup_value =



network.vlan.internet_port_enable = 1
network.vlan.internet_port_vid = 100
network.vlan.internet_port_priority = 0
network.vlan.pc_port_enable = 1
network.vlan.pc_port_vid =
network.vlan.pc_port_priority = 0



#######################################################################################
##                  Remote phonebook                                                     ##
#######################################################################################

#Configure the access URL and dispaly name of the remote phonebook. X ranges from 1 to 5.
#remote_phonebook.data.X.url =
#remote_phonebook.data.X.name =




##########################################
##      DialNOW         ##
##########################################


#Configure the delay time (in seconds) for the dialnow rule. It ranges from 1 to 14, the default value is 1.
phone_setting.dialnow_delay =




local_time.time_zone_name = United States-Eastern Time
local_time.time_zone = -5
local_time.ntp_server1 =
local_time.interval = 1000
local_time.summer_time = 2
local_time.dst_time_type = 0
local_time.start_time = 3/2/7/2
local_time.end_time = 11/1/7/2
local_time.offset_time =
local_time.time_format = 0
local_time.date_format = 4
local_time.dhcp_time = 0

multicast.codec = PCMU
multicast.receive_priority.enable = 0
multicast.receive_priority.priority = 0
multicast.listen_address.1.ip_address = 224.168.168.168:23456
multicast.listen_address.2.ip_address =
multicast.listen_address.3.ip_address =
multicast.listen_address.4.ip_address =
multicast.listen_address.5.ip_address =
multicast.listen_address.6.ip_address =
multicast.listen_address.7.ip_address =
multicast.listen_address.8.ip_address =
multicast.listen_address.9.ip_address =
multicast.listen_address.10.ip_address =
multicast.listen_address.1.label = All
multicast.listen_address.2.label =
multicast.listen_address.3.label =
multicast.listen_address.4.label =
multicast.listen_address.5.label =
multicast.listen_address.6.label =
multicast.listen_address.7.label =
multicast.listen_address.8.label =
multicast.listen_address.9.label =
multicast.listen_address.10.label =

firmware.url =
ringtone.url =
ringtone.delete =
wallpaper_upload.url = http://myphonesetup.com/
phone_setting.backgrounds = Resource:Default.jpg


</textarea><br/><br/>File:112233445566.xml<br/><textarea rows="50" cols="100"><xxxIPPhoneDirectory>



</xxxIPPhoneDirectory>
</textarea><br/><br/>File:y000000000028.cfg<br/><textarea rows="50" cols="100">#!version:1.0.0.1

##File header "#!version:1.0.0.1" can not be edited or deleted.##


security.user_password = admin:


#######################################################################################
##                Syslog Server                                                      ##
#######################################################################################

#Configure the IP address of the syslog server.
#Require reboot;
syslog.server =

#Configure the syslog level. It ranges from 0 to 6, the default value is 3.
#Require reboot;
syslog.log_level = 3

#######################################################################################
##                 Auto Provisioning                                                 ##
#######################################################################################

#Configure the auto provision mode;
#0-Disabled (default), 1-Power on, 4-Repeatedly, 5-Weekly, 6-Power on + Repeatedly, 7-Power on + Weekly;
auto_provision.power_on = 1
auto_provision.weekly.enable = 1
auto_provision.weekly.begin_time = 23:00
auto_provision.weekly.end_time = 23:59
auto_provision.weekly.dayofweek = 0123456
auto_provision.server.url = http:///provisioning/p.php/
auto_provision.server.username =
auto_provision.server.password =
auto_provision.dhcp_option.enable = 1

#Configure the mode of downloading configuration files for the phone. The value is 0(default) or 1.
#auto_provision.update_file_mode = 0




#######################################################################################
##                  Hot Desking                                                      ##
#######################################################################################
#Enable or disable the phone to show the following items on the login wizard during startup; 0-Disabled, 1-Enabled;

hotdesking.startup_register_name_enable = 0
hotdesking.startup_username_enable = 1
hotdesking.startup_password_enable = 0
hotdesking.startup_sip_server_enable = 0
hotdesking.startup_outbound_enable = 0

hotdesking.dsskey_register_name_enable = 0
hotdesking.dsskey_username_enable = 1
hotdesking.dsskey_password_enable = 0
hotdesking.dsskey_sip_server_enable = 0
hotdesking.dsskey_outbound_enable = 0

#######################################################################################
##                     Distinctive Ring Tones                                        ##
#######################################################################################

#"X" ranges from 1 to 10;
#Configure the text to map the keywords contained in the "Alert-info" header.
#distinctive_ring_tones.alert_info.X.text = family
distinctive_ring_tones.alert_info.1.text = Primary
distinctive_ring_tones.alert_info.2.text = Secondary
distinctive_ring_tones.alert_info.3.text = Tertiary
distinctive_ring_tones.alert_info.4.text = Quaternary
distinctive_ring_tones.alert_info.5.text = Quinary
distinctive_ring_tones.alert_info.6.text = Senary
distinctive_ring_tones.alert_info.7.text = Septenary
distinctive_ring_tones.alert_info.8.text = Octonary
distinctive_ring_tones.alert_info.9.text = Nonary
distinctive_ring_tones.alert_info.10.text = Denary

#Specify the ring tone for each text. It ranges from 1 to 8. The default value 1 stands for Ring1.wav.
#1-Ring1.wav, 2-Ring2.wav, 3-Ring3.wav, 4-Ring4.wav, 5-Ring5.wav, 6-Ring6.wav, 7-Ring7.wav, 8-Ring8.wav.
#distinctive_ring_tones.alert_info.X.ringer = 1
distinctive_ring_tones.alert_info.1.ringer = 1
distinctive_ring_tones.alert_info.2.ringer = 2
distinctive_ring_tones.alert_info.3.ringer = 3
distinctive_ring_tones.alert_info.4.ringer = 4
distinctive_ring_tones.alert_info.5.ringer = 5
distinctive_ring_tones.alert_info.6.ringer = 6
distinctive_ring_tones.alert_info.7.ringer = 7
distinctive_ring_tones.alert_info.8.ringer = 8



#######################################################################################
##                        Phone Features                                             ##
#######################################################################################

#Define the "#" or "*" key as the send key; 0-Disabled, 1-# key(default), 2-* key;
features.pound_key.mode = 1

#Enable or disable the phone to play tone when pressing the digit key; 0-Disabled, 1-Enabled (default);
features.send_key_tone =
features.key_tone = 0

#Enable or disable the phone to play a warning tone when there is a held call; 0-Disabled, 1-Enabled (default);
features.play_hold_tone.enable = 1

#Configure the interval of playing a warning tone. The default value is 30s.
features.play_hold_tone.delay = 20

#Enable or disable the phone to mute the call during an active call; 0-Disabled, 1-Enabled (default);
features.allow_mute = 1

#Specify the ring device when the phone is in the Headset mode; 0-use Speaker (default), 1-use Headset;
features.ringer_device.is_use_headset = 0

#Enable or disable the phone to pick up the call using the directed pickup soft key; 0-Disabled (default), 1-Enabled;
features.pickup.direct_pickup_enable = 1

#Configure the directed pickup code.
features.pickup.direct_pickup_code =

#Enable or disable the phone to play the warning tone when receiving a vocie mail. 0-Disabled; 1-Enabled(default).
features.voice_mail_tone_enable = 1

#Configure the time (in seconds) the phone automatically dials out the dialed digits. It ranges from 1 to 14, the default value is 4.
phone_setting.inter_digit_time = 4

#Configure the contrast of the LCD screen. It ranges from 1 to 10,the default value is 6.
phone_setting.contrast = 7

#Configure the active backlight level. It ranges from 1 to 3, the default value is 2.
#The same level for different phones may result in different backlight intensities.
phone_setting.active_backlight_level = 8

#Configure the backlight time (in seconds). The valid values are: 0-Always on, 1-Always off, 15-15s, 30-30s (default), 60-60s, 120-120s.
phone_setting.backlight_time = 1800
</textarea><br/><br/>