Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- cat src/linux-asahi-6.0-rc6-1/arch/arm64/boot/dts/apple/t8103-j313.dts
- // SPDX-License-Identifier: GPL-2.0+ OR MIT
- /*
- * Apple MacBook Air (M1, 2020)
- *
- * target-type: J313
- *
- * Copyright The Asahi Linux Contributors
- */
- /dts-v1/;
- #include "t8103.dtsi"
- #include "t8103-jxxx.dtsi"
- / {
- compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
- model = "Apple MacBook Air (M1, 2020)";
- };
- &wifi0 {
- brcm,board-type = "apple,shikoku";
- };
- &bluetooth0 {
- brcm,board-type = "apple,shikoku";
- };
- /*
- * Provide labels for the USB type C ports.
- */
- &typec0 {
- label = "USB-C Left-back";
- };
- &typec1 {
- label = "USB-C Left-front";
- };
- &spi3 {
- status = "okay";
- hid-transport@0 {
- compatible = "apple,spi-hid-transport";
- reg = <0>;
- spi-max-frequency = <8000000>;
- /*
- * cs-setup and cs-hold delays are derived from Apple's ADT
- * Mac OS driver meta data secify 45 us for 'cs to clock' and
- * 'clock to cs' delays.
- */
- spi-cs-setup-delay-ns = <20000>;
- spi-cs-hold-delay-ns = <20000>;
- spi-cs-inactive-delay-ns = <250000>;
- spien-gpios = <&pinctrl_ap 195 0>;
- interrupts-extended = <&pinctrl_nub 13 IRQ_TYPE_LEVEL_LOW>;
- };
- };
- /*
- * Remove unused PCIe ports and disable the associated DARTs.
- */
- &pcie0_dart_1 {
- status = "disabled";
- };
- &pcie0_dart_2 {
- status = "disabled";
- };
- /delete-node/ &port01;
- /delete-node/ &port02;
- &i2c1 {
- speaker_left: codec@31 {
- compatible = "ti,tas5770l", "ti,tas2770";
- reg = <0x31>;
- shutdown-gpios = <&pinctrl_ap 181 GPIO_ACTIVE_HIGH>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "Left";
- };
- };
- &i2c3 {
- speaker_right: codec@34 {
- compatible = "ti,tas5770l", "ti,tas2770";
- reg = <0x34>;
- shutdown-gpios = <&pinctrl_ap 181 GPIO_ACTIVE_HIGH>;
- #sound-dai-cells = <0>;
- sound-name-prefix = "Right";
- };
- jack_codec: codec@48 {
- compatible = "cirrus,cs42l83", "cirrus,cs42l42";
- reg = <0x48>;
- reset-gpios = <&pinctrl_nub 11 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&pinctrl_ap>;
- interrupts = <183 IRQ_TYPE_LEVEL_LOW>;
- #sound-dai-cells = <0>;
- cirrus,ts-inv = <1>;
- sound-name-prefix = "Jack";
- };
- };
- / {
- backlight: gpio-bl {
- compatible = "gpio-backlight";
- gpios = <&smc_gpio 18 GPIO_ACTIVE_HIGH>;
- default-on;
- };
- sound {
- compatible = "apple,j313-macaudio", "apple,macaudio";
- model = "MacBook Air J313";
- dai-link@0 {
- link-name = "Speakers";
- /*
- * DANGER ZONE: You can blow your speakers!
- *
- * The drivers are not ready, and unless you are careful
- * to attenuate the audio stream, you run the risk of
- * blowing your speakers.
- */
- status = "okay";
- cpu {
- sound-dai = <&mca 0>, <&mca 1>;
- };
- codec {
- sound-dai = <&speaker_left>, <&speaker_right>;
- };
- };
- dai-link@1 {
- link-name = "Headphone Jack";
- cpu {
- sound-dai = <&mca 2>;
- };
- codec {
- sound-dai = <&jack_codec>;
- };
- };
- };
- };
- &framebuffer0 {
- backlight = <&backlight>;
- };
Advertisement
Add Comment
Please, Sign In to add comment