Advertisement
jintack

A perfect SMP (2) L2 boot

Apr 19th, 2016
78
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.38 KB | None | 0 0
  1. Booting Linux on physical CPU 0x0
  2. Initializing cgroup subsys cpu
  3. Linux version 4.4.0-rc5+ (jintackl@kvm-node.jintackl-qv15103.kvmarm-pg0.utah.cloudlab.us) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-19ubuntu1) ) #2 SMP PREEMPT Tue Apr 19 20:00:21 MDT 2016
  4. Boot CPU: AArch64 Processor [500f0001]
  5. earlycon: Early serial console at MMIO 0x9000000 (options '')
  6. bootconsole [uart0] enabled
  7. efi: Getting EFI parameters from FDT:
  8. efi: UEFI not found.
  9. cma: Reserved 16 MiB at 0x00000000ff000000
  10. psci: probing for conduit method from DT.
  11. psci: PSCIv0.2 detected in firmware.
  12. psci: Using standard PSCI v0.2 function IDs
  13. psci: Trusted OS migration not required
  14. PERCPU: Embedded 15 pages/cpu @ffff8000fffb8000 s24576 r8192 d28672 u61440
  15. Detected PIPT I-cache on CPU0
  16. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1032192
  17. Kernel command line: earlycon=pl011,0x09000000 console=ttyAMA0 root=/dev/vda rw
  18. PID hash table entries: 4096 (order: 3, 32768 bytes)
  19. Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  20. Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  21. software IO TLB [mem 0xfafff000-0xfefff000] (64MB) mapped at [ffff8000bafff000-ffff8000beffefff]
  22. Memory: 4029996K/4194304K available (6002K kernel code, 505K rwdata, 2520K rodata, 548K init, 217K bss, 147924K reserved, 16384K cma-reserved)
  23. Virtual kernel memory layout:
  24. vmalloc : 0xffff000000000000 - 0xffff7bffbfff0000 (126974 GB)
  25. vmemmap : 0xffff7bffc0000000 - 0xffff7fffc0000000 ( 4096 GB maximum)
  26. 0xffff7bffc1000000 - 0xffff7bffc5000000 ( 64 MB actual)
  27. fixed : 0xffff7ffffa7fd000 - 0xffff7ffffac00000 ( 4108 KB)
  28. PCI I/O : 0xffff7ffffae00000 - 0xffff7ffffbe00000 ( 16 MB)
  29. modules : 0xffff7ffffc000000 - 0xffff800000000000 ( 64 MB)
  30. memory : 0xffff800000000000 - 0xffff800100000000 ( 4096 MB)
  31. .init : 0xffff8000008d5000 - 0xffff80000095e000 ( 548 KB)
  32. .text : 0xffff800000080000 - 0xffff8000008d4994 ( 8531 KB)
  33. .data : 0xffff80000096f000 - 0xffff8000009ed600 ( 506 KB)
  34. SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  35. Preemptible hierarchical RCU implementation.
  36. Build-time adjustment of leaf fanout to 64.
  37. RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
  38. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
  39. NR_IRQS:64 nr_irqs:64 0
  40. GICv2m: Node v2m: range[0x8020000:0x8020fff], SPI[80:144]
  41. Architected cp15 timer(s) running at 50.00MHz (virt).
  42. clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
  43. sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
  44. Console: colour dummy device 80x25
  45. Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
  46. pid_max: default: 32768 minimum: 301
  47. Security Framework initialized
  48. Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  49. Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  50. Initializing cgroup subsys memory
  51. Initializing cgroup subsys hugetlb
  52. EFI services will not be available.
  53. ASID allocator initialised with 65536 entries
  54. Detected PIPT I-cache on CPU1
  55. CPU1: Booted secondary processor [500f0001]
  56. Brought up 2 CPUs
  57. SMP: Total of 2 processors activated.
  58. CPU: All CPU(s) started at EL1
  59. devtmpfs: initialized
  60. DMI not present or invalid.
  61. clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  62. pinctrl core: initialized pinctrl subsystem
  63. NET: Registered protocol family 16
  64. cpuidle: using governor ladder
  65. cpuidle: using governor menu
  66. vdso: 2 pages (1 code @ ffff800000975000, 1 data @ ffff800000974000)
  67. hw-breakpoint: found 4 breakpoint and 4 watchpoint registers.
  68. DMA: preallocated 256 KiB pool for atomic allocations
  69. Serial: AMBA PL011 UART driver
  70. 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 38, base_baud = 0) is a PL011 rev1
  71. console [ttyAMA0] enabled
  72. console [ttyAMA0] enabled
  73. bootconsole [uart0] disabled
  74. bootconsole [uart0] disabled
  75. vgaarb: loaded
  76. SCSI subsystem initialized
  77. usbcore: registered new interface driver usbfs
  78. usbcore: registered new interface driver hub
  79. usbcore: registered new device driver usb
  80. pps_core: LinuxPPS API ver. 1 registered
  81. pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  82. PTP clock support registered
  83. dmi: Firmware registration failed.
  84. clocksource: Switched to clocksource arch_sys_counter
  85. NET: Registered protocol family 2
  86. TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  87. TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  88. TCP: Hash tables configured (established 32768 bind 32768)
  89. UDP hash table entries: 2048 (order: 4, 65536 bytes)
  90. UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  91. NET: Registered protocol family 1
  92. RPC: Registered named UNIX socket transport module.
  93. RPC: Registered udp transport module.
  94. RPC: Registered tcp transport module.
  95. RPC: Registered tcp NFSv4.1 backchannel transport module.
  96. kvm [1]: HYP mode not available
  97. nest-tests successfully initialized
  98. futex hash table entries: 512 (order: 4, 65536 bytes)
  99. audit: initializing netlink subsys (disabled)
  100. audit: type=2000 audit(3.152:1): initialized
  101. hrtimer: interrupt took 18594420 ns
  102. HugeTLB registered 2 MB page size, pre-allocated 0 pages
  103. VFS: Disk quotas dquot_6.6.0
  104. VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  105. NFS: Registering the id_resolver key type
  106. Key type id_resolver registered
  107. Key type id_legacy registered
  108. fuse init (API version 7.23)
  109. 9p: Installing v9fs 9p2000 file system support
  110. io scheduler noop registered
  111. io scheduler cfq registered (default)
  112. PCI host bridge /pcie@10000000 ranges:
  113. IO 0x3eff0000..0x3effffff -> 0x00000000
  114. MEM 0x10000000..0x3efeffff -> 0x10000000
  115. pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
  116. pci_bus 0000:00: root bus resource [bus 00-0f]
  117. pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  118. pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
  119. pci 0000:00:01.0: BAR 1: assigned [mem 0x10000000-0x10000fff]
  120. pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x103f]
  121. virtio-pci 0000:00:01.0: enabling device (0000 -> 0003)
  122. virtio-pci 0000:00:01.0: virtio_pci: leaving for legacy driver
  123. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  124. msm_serial: driver initialized
  125. Unable to detect cache hierarchy from DT for CPU 0
  126. loop: module loaded
  127. tun: Universal TUN/TAP device driver, 1.6
  128. tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  129. sky2: driver version 1.30
  130. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  131. ehci-pci: EHCI PCI platform driver
  132. ehci-platform: EHCI generic platform driver
  133. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  134. ohci-pci: OHCI PCI platform driver
  135. ohci-platform: OHCI generic platform driver
  136. usbcore: registered new interface driver usb-storage
  137. mousedev: PS/2 mouse device common for all mice
  138. device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  139. sdhci: Secure Digital Host Controller Interface driver
  140. sdhci: Copyright(c) Pierre Ossman
  141. Synopsys Designware Multimedia Card Interface Driver
  142. sdhci-pltfm: SDHCI platform and OF driver helper
  143. ledtrig-cpu: registered to indicate activity on CPUs
  144. usbcore: registered new interface driver usbhid
  145. usbhid: USB HID core driver
  146. NET: Registered protocol family 17
  147. bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  148. 9pnet: Installing 9P2000 support
  149. Key type dns_resolver registered
  150. registered taskstats version 1
  151. hctosys: unable to open rtc device (rtc0)
  152. uart-pl011 9000000.pl011: no DMA platform data
  153. EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
  154. EXT4-fs (vda): recovery complete
  155. EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
  156. VFS: Mounted root (ext4 filesystem) on device 254:0.
  157. devtmpfs: mounted
  158. Freeing unused kernel memory: 548K (ffff8000008d5000 - ffff80000095e000)
  159. Freeing alternatives memory: 48K (ffff80000095e000 - ffff80000096a000)
  160. Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
  161. random: init urandom read with 5 bits of entropy available
  162. init: hwclock main process (763) terminated with status 1
  163. init: plymouth-upstart-bridge main process (761) terminated with status 1
  164. init: plymouth-upstart-bridge main process ended, respawning
  165. * Stopping Send an event to indicate plymouth is up [ OK ]
  166. * Starting Mount filesystems on boot [ OK ]
  167. * Starting Signal sysvinit that the rootfs is mounted [ OK ]
  168. * Starting Populate /dev filesystem [ OK ]
  169. * Stopping Populate /dev filesystem [ OK ]
  170. * Starting Clean /tmp directory [ OK ]
  171. * Starting Populate and link to /run filesystem [ OK ]
  172. * Stopping Track if upstart is running in a container [ OK ]
  173. * Stopping Populate and link to /run filesystem [ OK ]
  174. * Stopping Clean /tmp directory [ OK ]
  175. * Starting Signal sysvinit that virtual filesystems are mounted [ OK ]
  176. * Starting Signal sysvinit that virtual filesystems are mounted [ OK ]
  177. * Starting Bridge udev events into upstart [ OK ]
  178. * Starting Signal sysvinit that local filesystems are mounted [ OK ]
  179. * Starting Signal sysvinit that remote filesystems are mounted [ OK ]
  180. * Starting device node and kernel event manager [ OK ]
  181. * Starting flush early job output to logs [ OK ]
  182. * Stopping Mount filesystems on boot [ OK ]
  183. * Stopping flush early job output to logs [ OK ]
  184. * Starting load modules from /etc/modules [ OK ]
  185. * Starting cold plug devices [ OK ]
  186. * Starting log initial device creation [ OK ]
  187. * Stopping load modules from /etc/modules [ OK ]
  188. * Starting configure network device security [ OK ]
  189. * Starting system logging daemon [ OK ]
  190. * Starting Mount network filesystems [ OK ]
  191. * Starting Failsafe Boot Delay [ OK ]
  192. * Stopping cold plug devices [ OK ]
  193. * Stopping Mount network filesystems [ OK ]
  194. * Stopping log initial device creation [ OK ]
  195. * Starting load fallback graphics devices [ OK ]
  196. * Starting configure network device security [ OK ]
  197. * Starting load fallback graphics devices [fail]
  198. * Starting save udev log and update rules [ OK ]
  199. * Stopping Failsafe Boot Delay [ OK ]
  200. * Stopping save udev log and update rules [ OK ]
  201.  
  202. Ubuntu 14.04 LTS kvm-guest ttyAMA0
  203.  
  204. kvm-guest login: root (automatic login)
  205.  
  206. Last login: Thu Jan 1 00:00:23 UTC 1970 on ttyAMA0
  207. Welcome to Ubuntu 14.04 LTS (GNU/Linux 4.4.0-rc5+ aarch64)
  208.  
  209. * Documentation: http://www.linaro.org
  210. root@kvm-guest:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement