Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 6.1.7 (faber@7c0440d7ee00) (aarch64-buildroot-linux-gnu-gcc.br_real (Buildroot 2019.11-19265-g3527b4b967) 12.2.0, GNU ld (GNU Binutils) 2.38) #1 SMP PREEMPT Sat Jan 21 05:23:06 Europe 2023
Machine model: OrangePi 3 LTS
Zone ranges:
  DMA      [mem 0x0000000040000000-0x00000000bfffffff]
  DMA32    empty
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000040000000-0x00000000bfffffff]
Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
cma: Reserved 256 MiB at 0x00000000ad800000
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 19 pages/cpu s37032 r8192 d32600 u77824
pcpu-alloc: s37032 r8192 d32600 u77824 alloc=19*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected VIPT I-cache on CPU0
alternatives: applying boot alternatives
Built 1 zonelists, mobility grouping on.  Total pages: 516096
Kernel command line: initrd=/boot/initrd.lz4 label=BATOCERA rootwait quiet loglevel=0 console=ttyS0,115200 console=tty3
Unknown kernel command line parameters "label=BATOCERA", will be passed to user space.
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 1770152K/2097152K available (14528K kernel code, 1396K rwdata, 3764K rodata, 3008K init, 685K bss, 64856K reserved, 262144K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
rcu: Preemptible hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
        Trampoline variant of Tasks RCU enabled.
        Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Root IRQ handler: gic_handle_irq
GIC: Using split EOI/Deactivate mode
rcu: srcu_init: Setting srcu_struct sizes based on contention.
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
Console: colour dummy device 80x25
printk: console [tty3] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
cacheinfo: Unable to detect cache hierarchy for CPU 0
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
cblist_init_generic: Setting shift to 2 and lim to 1.
rcu: Hierarchical SRCU implementation.
rcu:    Max phase no-delay instances is 1000.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
cacheinfo: Unable to detect cache hierarchy for CPU 1
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
cacheinfo: Unable to detect cache hierarchy for CPU 2
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
cacheinfo: Unable to detect cache hierarchy for CPU 3
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: applying system-wide alternatives
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor ladder
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
platform 6510000.tcon-top: Fixing up cyclic dependency with 6000000.hdmi
platform 6515000.lcd-controller: Fixing up cyclic dependency with 6510000.tcon-top
platform connector: Fixing up cyclic dependency with 6000000.hdmi
platform vcc-wifi-io: Fixing up cyclic dependency with vcc33-wifi
cryptd: max_cpu_qlen set to 1000
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
PTP clock support registered
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arch_sys_counter
FS-Cache: Loaded
NET: Registered PF_INET protocol family
IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=19 bucket_order=0
Freeing initrd memory: 868K
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
fuse: init (API version 7.37)
SGI XFS with ACLs, security attributes, no debug enabled
NET: Registered PF_ALG protocol family
xor: measuring software checksum speed
   8regs           :  1809 MB/sec
   32regs          :  1867 MB/sec
   arm64_neon      :  1562 MB/sec
xor: using function: 32regs (1867 MB/sec)
async_tx: api initialized (async)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Asymmetric key parser 'pkcs8' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
io scheduler mq-deadline registered
io scheduler bfq registered
Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
cacheinfo: Unable to detect cache hierarchy for CPU 0
loop: module loaded
zram: Added device: zram0
wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered PF_PPPOX protocol family
Broadcom 43xx driver loaded [ Features: NLS ]
usbcore: registered new interface driver rt2800usb
usbcore: registered new interface driver r8152
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_eem
usbcore: registered new interface driver cdc_ncm
usbcore: registered new interface driver r8153_ecm
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usblp
usbcore: registered new interface driver cdc_wdm
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ch341
usbserial: USB Serial support registered for ch341-uart
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
UDC core: g_cdc: couldn't find an available UDC
vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1
vhci_hcd: created sysfs vhci_hcd.0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: USB/IP Virtual Host Controller
usb usb1: Manufacturer: Linux 6.1.7 vhci_hcd
usb usb1: SerialNumber: vhci_hcd.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller
vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: USB/IP Virtual Host Controller
usb usb2: Manufacturer: Linux 6.1.7 vhci_hcd
usb usb2: SerialNumber: vhci_hcd.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
usbcore: registered new device driver usbip-host
using random self ethernet address
using random host ethernet address
usb0: HOST MAC 4e:12:99:b2:18:0e
usb0: MAC fa:69:d4:e9:1b:03
g_cdc gadget.0: CDC Composite Gadget, version: King Kamehameha Day 2008
g_cdc gadget.0: g_cdc ready
mousedev: PS/2 mouse device common for all mice
sun6i-rtc 7000000.rtc: registered as rtc0
sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:03 UTC (3)
sun6i-rtc 7000000.rtc: RTC enabled
i2c_dev: i2c /dev entries driver
IR JVC protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
IR NEC protocol handler initialized
IR RC5(x/sz) protocol handler initialized
IR RC6 protocol handler initialized
IR SANYO protocol handler initialized
IR Sharp protocol handler initialized
IR Sony protocol handler initialized
IR XMP protocol handler initialized
usbcore: registered new interface driver uvcvideo
sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ID = jep106:091e:1728 Revision = 0x00000001
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
gnss: GNSS driver registered with major 241
usbcore: registered new interface driver snd-usb-audio
GACT probability NOT on
ipip: IPv4 and MPLS over IPv4 tunneling driver
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
bpfilter: Loaded bpfilter_umh pid 90
NET: Registered PF_PACKET protocol family
NET: Registered PF_KEY protocol family
Bridge firewalling registered
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
l2tp_ip: L2TP IP encapsulation support (L2TPv3)
l2tp_netlink: L2TP netlink interface
l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
8021q: 802.1Q VLAN Support v1.8
sctp: Hash tables configured (bind 256/256)
tipc: Activated (version 2.0.0)
NET: Registered PF_TIPC protocol family
tipc: Started in single node mode
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top
sun50i-h6-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010
xhci-hcd xhci-hcd.1.auto: irq 88, io mem 0x05200000
xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.1.7 xhci-hcd
usb usb3: SerialNumber: xhci-hcd.1.auto
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.1.7 xhci-hcd
usb usb4: SerialNumber: xhci-hcd.1.auto
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator
axp20x-i2c 0-0036: AXP20x variant AXP806 found
axp20x-i2c 0-0036: mask_invert=true is deprecated; please switch to unmask_base
input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input0
axp20x-i2c 0-0036: AXP20X driver loaded
Registered IR keymap rc-empty
rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0
rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter
input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input1
sunxi-ir 7040000.ir: initialized sunXi IR driver
sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator
sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver
sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator
printk: console [ttyS0] disabled
5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 237, base_baud = 1500000) is a 16550A
printk: console [ttyS0] enabled
sun50i-h6-pinctrl 300b000.pinctrl: request() failed for pin 198
sun50i-h6-pinctrl 300b000.pinctrl: pin-198 (5000400.serial) status -517
sun50i-h6-pinctrl 300b000.pinctrl: could not request pin 198 (PG6) from group PG6  on device 300b000.pinctrl
dw-apb-uart 5000400.serial: Error applying setting, reverse things back
panfrost 1800000.gpu: clock rate = 432000000
panfrost 1800000.gpu: bus_clock rate = 100000000
panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0
panfrost 1800000.gpu: features: 00000000,00000408, issues: 00000000,21054400
panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7
panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1
[drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 0
sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator
sunxi-mmc 4020000.mmc: Got CD GPIO
5000400.serial: ttyS1 at MMIO 0x5000400 (irq = 243, base_baud = 1500000) is a 16550A
serial serial0: tty port ttyS1 registered
dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found
dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found
dwmac-sun8i 5020000.ethernet: PTP uses main clock
dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000)
sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode
sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa AALCD 29.7 GiB
 mmcblk0: p1 p2
mmc1: new HS200 MMC card at address 0001
mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
 mmcblk1: p1
mmcblk1boot0: mmc1:0001 8GTF4R 4.00 MiB
mmcblk1boot1: mmc1:0001 8GTF4R 4.00 MiB
dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported
dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported
dwmac-sun8i 5020000.ethernet: COE Type 2
dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported
dwmac-sun8i 5020000.ethernet: Normal descriptors
dwmac-sun8i 5020000.ethernet: Chain mode enabled
ehci-platform 5101000.usb: EHCI Host Controller
ehci-platform 5101000.usb: new USB bus registered, assigned bus number 5
ehci-platform 5101000.usb: irq 245, io mem 0x05101000
ehci-platform 5311000.usb: EHCI Host Controller
ehci-platform 5311000.usb: new USB bus registered, assigned bus number 6
usb_phy_generic usb_phy_generic.2.auto: supply vcc not found, using dummy regulator
ehci-platform 5311000.usb: irq 246, io mem 0x05311000
usb_phy_generic usb_phy_generic.2.auto: dummy supplies not allowed for exclusive requests
musb-hdrc musb-hdrc.3.auto: MUSB HDRC host driver
musb-hdrc musb-hdrc.3.auto: new USB bus registered, assigned bus number 7
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: MUSB HDRC host driver
usb usb7: Manufacturer: Linux 6.1.7 musb-hcd
usb usb7: SerialNumber: musb-hdrc.3.auto
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-platform 5101400.usb: Generic Platform OHCI controller
ohci-platform 5101400.usb: new USB bus registered, assigned bus number 8
ohci-platform 5101400.usb: irq 248, io mem 0x05101400
ohci-platform 5311400.usb: Generic Platform OHCI controller
ohci-platform 5311400.usb: new USB bus registered, assigned bus number 9
ohci-platform 5311400.usb: irq 249, io mem 0x05311400
cfg80211: Loading compiled-in X.509 certificates for regulatory database
sunxi-mmc 4021000.mmc: allocated mmc-pwrseq
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
ALSA device list:
  No soundcards found.
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
cfg80211: failed to load regulatory.db
ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 6.1.7 ehci_hcd
usb usb5: SerialNumber: 5101000.usb
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 6.1.7 ehci_hcd
usb usb6: SerialNumber: 5311000.usb
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: Generic Platform OHCI controller
usb usb8: Manufacturer: Linux 6.1.7 ohci_hcd
usb usb8: SerialNumber: 5101400.usb
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: Generic Platform OHCI controller
usb usb9: Manufacturer: Linux 6.1.7 ohci_hcd
usb usb9: SerialNumber: 5311400.usb
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 1 port detected
musb-hdrc musb-hdrc.3.auto: VBUS_ERROR in a_idle (80, <SessEnd), retry #0, port1 00000104
sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
Freeing unused kernel memory: 3008K
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
    label=BATOCERA
mmc2: new high speed SDIO card at address 8800
loop0: detected capacity change from 0 to 2680488
/dev/loop0: Can't open blockdev
/dev/loop0: Can't open blockdev
/dev/loop0: Can't open blockdev
/dev/loop0: Can't open blockdev
usb 5-1: new high-speed USB device number 2 using ehci-platform
usb 5-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 5-1: Product: USB 2.0 Hub
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 5-1.3: new low-speed USB device number 3 using ehci-platform
usb 5-1.3: New USB device found, idVendor=046d, idProduct=c30b, bcdDevice= 1.33
usb 5-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.3: Product: NetPlay Keyboard
usb 5-1.3: Manufacturer: Logitech
input: Logitech NetPlay Keyboard as /devices/platform/soc/5101000.usb/usb5/5-1/5-1.3/5-1.3:1.0/0003:046D:C30B.0001/input/input2
hid-generic 0003:046D:C30B.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech NetPlay Keyboard] on usb-5101000.usb-1.3/input0
usb 5-1.4: new low-speed USB device number 4 using ehci-platform
usb 5-1.4: New USB device found, idVendor=1c59, idProduct=0023, bcdDevice= 0.21
usb 5-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1.4: Product:  THEC64 Joystick
usb 5-1.4: Manufacturer:  THEC64 Joystick
input:  THEC64 Joystick     THEC64 Joystick    as /devices/platform/soc/5101000.usb/usb5/5-1/5-1.4/5-1.4:1.0/0003:1C59:0023.0002/input/input3
hid-generic 0003:1C59:0023.0002: input,hidraw1: USB HID v1.10 Joystick [ THEC64 Joystick     THEC64 Joystick   ] on usb-5101000.usb-1.4/input0
random: crng init done
udevd[349]: starting version 3.2.11
udevd[351]: starting eudev-3.2.11
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol BCSP registered
Bluetooth: HCI UART protocol LL registered
Bluetooth: HCI UART protocol ATH3K registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
Bluetooth: HCI UART protocol Intel registered
Bluetooth: HCI UART protocol Broadcom registered
Bluetooth: HCI UART protocol QCA registered
Bluetooth: HCI UART protocol AG6XX registered
Bluetooth: HCI UART protocol Marvell registered
hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
dwmac-sun8i 5020000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
dwmac-sun8i 5020000.ethernet eth0: PHY [stmmac-0:01] driver [Generic PHY] (irq=POLL)
dwmac-sun8i 5020000.ethernet eth0: No Safety Features support found
dwmac-sun8i 5020000.ethernet eth0: No MAC Management Counters available
dwmac-sun8i 5020000.ethernet eth0: PTP not supported by HW
dwmac-sun8i 5020000.ethernet eth0: configuring for phy/rgmii-id link mode
Bluetooth: hci0: command 0xfc18 tx timeout
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: disabled.
EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: disabled.
ext3: Unknown parameter 'iocharset'
ext2: Unknown parameter 'iocharset'
ext4: Unknown parameter 'iocharset'
squashfs: Unknown parameter 'iocharset'
fuseblk: Unknown parameter 'iocharset'
xfs: Unknown parameter 'iocharset'
/dev/mmcblk0p2: Can't open blockdev
/dev/mmcblk0p2: Can't open blockdev
dwmac-sun8i 5020000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
cedrus 1c0e000.video-codec: deferred probe timeout, ignoring dependency
cedrus 1c0e000.video-codec: Device registered as /dev/video0
sun8i-mixer 1100000.mixer: deferred probe timeout, ignoring dependency
sun4i-drm display-engine: deferred probe timeout, ignoring dependency
sun4i-drm display-engine: bound 1100000.mixer (ops 0xffffffc008ed3d48)
sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffffffc008ed83b8)
sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffffffc008ed1490)
sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator
sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY)
sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver
Registered IR keymap rc-cec
rc rc1: dw_hdmi as /devices/platform/soc/6000000.hdmi/rc/rc1
input: dw_hdmi as /devices/platform/soc/6000000.hdmi/rc/rc1/input4
sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffffffc008ed3050)
[drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 1
fbcon: Deferring console take-over
sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device
Bluetooth: hci0: BCM: failed to write update baudrate (-110)
Bluetooth: hci0: Failed to set baudrate
Bluetooth: hci0: command 0x0c03 tx timeout
Bluetooth: hci0: BCM: Reset failed (-110)
cldo2: disabling
cldo3: disabling