Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ****************************************************************************************
- get_flash_format_version
- [ERROR]: 0x%08x sc_nv_storage %d
- [ERROR]: 0x%08x sc_nv_storage size %d
- [ERROR]: 0x%08x get_eeprom_dgbe_ip_gateway %d
- [ERROR]: 0x%08x get_eeprom_dgbe_ip_netmask %d
- [ERROR]: 0x%08x get_eeprom_dgbe_ip_address %d
- [ERROR]: 0x%08x get_eeprom_sata_param %d
- [ERROR]: 0x%08x get_eeprom_core_os_bank_indicator %d
- [ERROR]: 0x%08x get_eeprom_cellos_spu_configure %d
- [ERROR]: 0x%08x get_eeprom_flash_ext_format %d
- [ERROR]: 0x%08x get_eeprom_cellos_flags %d
- [ERROR]: 0x%08x get_eeprom_gx_config %d
- [ERROR]: 0x%08x get_eeprom_select_dgbe_device %d
- [ERROR]: 0x%08x get_eeprom_os_boot_order_flag %d
- [ERROR]: 0x%08x get_eeprom_restrict_spu_flag %d
- [ERROR]: 0x%08x set_eeprom_restrict_spu_flag %d
- [ERROR]: 0x%08x set_release_mode %d
- [ERRPR]: sc_version %d
- [ERRPR]: get H/W config %d
- [WARN]: %s: unknown flash_format_version version %04x, format_version %04x
- Cyt2
- Cyt3
- Cyt1
- [ERROR]: 0x%08x get_eeprom_select_net_device %d
- load_component_from_memory
- load_component_from_rom_region
- load_component_from_bank
- load_component_from_region
- %s(%d): allocation failure. size 0x%x, align 0x%x, alloc 0x%x, free 0x%x
- flash_format_1_component_loader: unsupported component_id=%d
- read_composite_region_header: result %d
- read_composite_region_header: read_size %lld
- load_components %lld too large.
- load_components %s too large.
- eEID
- flash_format_1_component_loader: unknown component_id=%d
- allocate_io_address
- invalidate4_iopt_cache fail %d
- iost_addr is not aligned 4KB %08llx
- iopt_addr is not aligned 4KB %08llx
- %s: allocate_iost_entry fail %d
- %s: invalid page_size
- %s: ea_addr is not aligned by page_size in byte
- %s: invalid ea_size < page size in byte
- %s: iopt_entry_num > %d
- %s: allocate_iopt_entry fail %d
- create_alt_sys_parm
- %s: parm_name too long
- %s = 0x%llx
- %s: alt_sys_parm full
- be.0.bp_base
- be.0.ioif0.addr
- be.0.ioif1.addr
- be.0.nclk
- be.0.ref_clk
- be.0.spu.faultbm
- be.0.tb_clk
- mu.1.size
- plat.id
- sys.load.image.in_rom
- sys.rom.addr
- [ERROR]: 0x%08x invalid debug_interface was selected
- sys.dbgcard.dgbe
- sys.dbgcard.dgbe.index
- sys.dgbe.ipaddr
- sys.dgbe.netmask
- sys.dgbe.gateway
- spider.gbe0.macaddr.0
- sys.platform.mode
- sys.mambo.version
- sys.syscon.protocol_version
- rsx.rdcy.%d
- 4.4.6
- sys.lv0.version
- 5084
- sys.lv0.revision
- sys.lv0.address
- sys.lv0.size
- sys.flash.fmt
- sys.flash.ext
- sys.flash.boot
- sys.wake_source
- sys.ac.sd
- sys.ac.misc
- sys.qaf.qafen
- sys.hw.config
- sys.hw.config_version
- sys.hw.model_emulate
- sys.cellos.flags
- sys.cellos.spu.configure
- sys.ac.misc2
- sys.sata.param
- sys.ac.product_code
- sys.boot.gos
- %s%s%s
- Boot Loader SE Version 4.4.6
- (Build ID: 5084,49873,
- Build Date: 2013-06-19_23:45:26)
- SDK Version: %s
- Copyright(C) 2013 Sony Computer Entertainment Inc.All Rights Reserved.
- [ERROR]: 0x%08x unknown lv1 file not found
- [ERROR]: 0x%08x %s not found
- load lv1 fail
- init_device_0 fail
- init_device_1 fail
- [ERROR]: 0x%08x component_manager::initialize
- [ERROR]: 0x%08x component_init
- [ERROR]: 0x%08x overwrite_2nd_component %d
- [ERROR]: 0x%08x load_2nd_component %d
- [ERROR]: 0x%08x get_component %d
- [WARRING]: 0x%08x get_component %d
- [ERROR]: 0x%08x lv1ldr get fail.
- [ERROR]: 0x%08x allocate is_qa_flag
- [ERROR]: 0x%08x allocate get_qa_flag
- [WARRING]: 0x%08x get_qa_flag
- [ERROR]: 0x%08x allocate trace_level
- [ERROR]: 0x%08x Boot CELL OS
- [ERROR]: 0x%08x lv1ldr stop with stopcode %d
- [ERROR]: 0x%08x lv1ldr stop wo stopcode
- [ERROR]: 0x%08x Boot CELL OS : stopcode [%d]
- [ERROR]: 0x%08x Boot CELL OS : without stopcode %08x
- [ERROR]: 0x%08x Boot CELL OS : interrupt handler err [%d]
- [ERROR]: 0x%08x Boot CELL OS : valid spuid not found
- [ERROR]: 0x%08x : allocate io address
- [ERROR]: 0x%08x Boot CELL OS. (init_load_elf)
- [INFO]: eid_0 not found
- memory_budget::initialize: addr = 0x%llx, size = 0x%llx
- [ERROR]: 0x%08x Debug interface CP initialize fail
- [ERROR]: 0x%08x Debug interface CP Ch4 initialize fail
- [ERROR]: 0x%08x Debug interface Configuration fail
- is_emmcbridge_interrupt_asserted
- is_ss2_interrupt_asserted
- [ERROR] %s(%d) pio is not contifured
- Build Date: 2013-06-19_23:45:12)
- [INFO]: BE:1.0,
- [INFO]: BE:1.1,
- [INFO]: BE:1.2,
- [INFO]: BE:2.0,
- [INFO]: BE:3.0,
- [INFO]: BE:3.1,
- [INFO]: BE:3.2,
- [INFO]: BE:11S DD1.0,
- [INFO]: BE:12S DD1.0,
- [INFO]: BE:12S DD2.0,
- [INFO]: BE:unknown,
- SB:DX1.0
- SB:DX1.1
- SB:DX2.0
- SB:DX3.0
- SB:DX3.1
- SB:DX3.2
- SB:PX1.0
- SB:PX1.1
- SB:SX1.0
- SB:SX1.1
- SB:SX1.2
- SB:ZX1.0
- SB:ZX1.1
- SB:ZX1.2
- SB:unknown
- [INFO]: SPU enable [
- [INFO]: === eXtreme Data Rate Memory Subsystem ===
- [INFO]: (Configured Memory Size per single XIO channel: %d MBytes.)
- [INFO]: XIO channel[0] is
- available.
- [INFO]: XIO channel[1] is
- *NOT* available.
- [INFO]: ---> Total %d MBytes are now in use.
- [ERROR]: 0x%08x get_eeprom_bootrom_trace_leve fail %d
- [ERROR]: 0x%08x Invalid be_ref_clk %08x or ref_div %08llx
- [ERROR]: 0x%08x iost/iopt buffer allocate fail
- [ERROR]: 0x%08x physical_console::initialize
- platform_pwrmgr::reboot
- fail platform_pwrmgr::reboot
- platform_pwrmgr::shutdown
- fail platform_pwrmgr::shutdown
- load_component
- error : %s size is too large.
- read_cmpl_msg_ver1
- write_init_msg_ver1
- send_and_receive_safe
- send_and_receive
- %s: sc_tc(0x%04x) == sc_rc(0x%04x)
- %s: too small payload_size %d, body_len %d
- %s: too large payload_len %d
- %s: body_len(%04x) != body_len2(%04x)
- %s: header checksum %d != %d
- %s: payload checksum %d != %d
- %s: too large payload_size %d
- %s: be_tc(0x%04x) != be_rc(0x%04x)
- %s: write_init_msg fail %d
- %s: wait_swbint(0) returns unknown value %d
- %s: read_cmpl_msg fail %d
- %s: skip cmpl err %d, receive_id %d, transaction_id %d, communication_tag %d
- %s: read_stat_msg fail %d
- %s: write_stat_msg fail %d
- %s: read_cmpl_msg unknown id %d
- %s: read_cmpl_msg unknown transaction_id %d
- %s: read_cmpl_msg unknown communication_tag %d
- sc_nv_storage error status %d
- asecure_loader
- ros0
- ros1
- [ERROR]: 0x%08x unknown flash format
- metldr.2
- lv2ldr
- appldr
- isoldr
- parm.txt
- lv1ldr
- lv1.self
- eid0
- sdk_version
- metldr
- lv2ldr.2
- appldr.2
- isoldr.2
- lv1ldr.2
- [ERROR]: 0x%08x systemio_dmac_px::configure fail %d,
- [ERROR]: 0x%08x spansion_storage_plain::init fail %d,
- program_write_buffer
- program_half_word
- unlock_bypass_program
- %s: NOR is corrupted, data %04x, expect %04x, addr %llx, data_num %d
- %s: write to buffer was aborted.. data 0x%04x, expect 0x%04x
- data verify failed...
- data: 0x%x
- rom address: 0x%x
- %s: NOR is corrupted
- ERROR: program
- Halt system due to fatal error (2)
- [ERROR]: 0x%08x allocate fail sector_work
- read_block_condition
- read_page
- erase_flash
- low_level_format
- identify_device
- erase_sector
- write_sector
- idle
- read_sector
- [ERROR] 0x%08x %s(%d) intr %08x
- write
- read
- [ERROR] %s(%d) get_size %d
- [WARN] %s(%d) device_size <= offset
- [ERROR] %s(%d) read_sector_poll
- [ERROR] %s(%d) erase_sector_poll
- [ERROR] %s(%d) write_sector_poll
- [ERROR] %s(%d) read_sector_dma
- get_device_size
- erase_sectors_poll_16
- write_sectors_poll_16
- read_sectors_dma
- read_sectors_poll
- [ERROR] 0x%08x %s(%d) start_erase_sector %d, stataus %08x
- [ERROR] 0x%08x %s(%d) erase_sector %d, stataus %08x
- [ERROR] 0x%08x %s(%d) start_write_sector %d, stataus %08x
- [ERROR] 0x%08x %s(%d) write_sector %d, stataus %08x
- [ERROR] 0x%08x %s(%d) start_read_sector %d, stataus %08x
- [ERROR] 0x%08x %s(%d) kick_dma %d
- [ERROR] 0x%08x %s(%d) get_dma_status %08x
- [ERROR] 0x%08x %s(%d) interrupt %08x
- [ERROR] 0x%08x %s(%d) start_idle %d, stataus %08x
- [ERROR] 0x%08x %s(%d) idle %d, stataus %08x
- [ERROR] 0x%08x %s(%d) read_sector %d, stataus %08x
- [ERROR] %s(%d) identify_device %d
- [ERROR] %s(%d) identify_info[0] %04x
- 0123456789abcdef
- 0123456789ABCDEF
- [WARN]: sc_version nvs fail %d
- [ERROR]: nv_storage::write block %d, offset %d, size %d fail %d
- [ERROR]: nv_storage::read block %d, offset %d, size %d fail %d
- get_dma_status
- [ERROR]: 0x%08x %s fail %08x
- is_ebus_interrupt_asserted
- get_dma_status
- [ERROR]: 0x%08x %s not configured
- [ERROR]: 0x%08x %s err status %08x
- ERROR: internal_console allocate memory
- ERROR: log_cons_channel init %d
- [ERROR]: 0x%08x gbe_work_addr
- [ERROR]: 0x%08x gbe_work_size 0x%llx
- [ERROR]: 0x%08x pci_mini_driver::set_bus_power fail
- [ERROR]: 0x%08x fatal. set_power_status<pci_bus> fail %d
- [ERROR]: 0x%08x fatal. get_power_status<pci_bus> fail %d
- ERROR: phy_console buf
- authorize_file
- get_file_name
- get_file
- ERROR: log_cons_ctl buf
- ERROR: log_cons_ctl init %d
- ERROR: log_cons_data buf
- ERROR: log_cons_data init %d
- [WARN]: %s(%d) command(%d) == FT_SEND_DATA(%d)
- [WARN]: %s(%d) parameter(%d) <= %d
- [WARN]: %s(%d) parameter(%d) == src_size(%d)
- ********************************************************************************
- unknown
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement