API tools faq
paste
CGarces

Custom Kernel2

CGarces
Mar 21st, 2014
705
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.97 KB | None | 0 0
raw download clone embed print report
  1. Booting Linux on physical CPU 0
  2. Initializing cgroup subsys cpuset
  3. Linux version 3.4.79-custom1+ (root@antiX1) (gcc version 4.7.2 (Debian 4.7.2-5) ) #4 PREEMPT Fri Mar 21 01:27:12 CET 2014
  4. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  5. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. Machine: sun4i
  7. Memory Reserved:
  8. SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  9. G2D : 0x50000000 - 0x50ffffff ( 16 MB)
  10. LCD : 0x51000000 - 0x52ffffff ( 32 MB)
  11. cma: CMA: reserved 192 MiB at 43c00000
  12. Memory policy: ECC disabled, Data cache writeback
  13. sunxi: Allwinner A10 revision C (AW1623/sun4i) detected.
  14. On node 0 totalpages: 262144
  15. free_area_init_node: node 0, pgdat c07b9a28, node_mem_map d3000000
  16. DMA zone: 512 pages used for memmap
  17. DMA zone: 0 pages reserved
  18. DMA zone: 65024 pages, LIFO batch:15
  19. Normal zone: 1008 pages used for memmap
  20. Normal zone: 128016 pages, LIFO batch:31
  21. HighMem zone: 528 pages used for memmap
  22. HighMem zone: 67056 pages, LIFO batch:15
  23. pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. pcpu-alloc: [0] 0
  25. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  26. Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait panic=10 consoleblank=0 vt.global_cursor_default=0 disp.screen0_output_mode=EDID:1280x720p60 hdmi.audio=EDID:1 mac_addr=AE:12:34:56:78:AE
  27. PID hash table entries: 4096 (order: 2, 16384 bytes)
  28. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  29. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  30. Memory: 1024MB = 1024MB total
  31. Memory: 783700k/783700k available, 264876k reserved, 270336K highmem
  32. Virtual kernel memory layout:
  33. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  34. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  35. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  36. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  37. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  38. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  39. .text : 0xc0008000 - 0xc072a000 (7304 kB)
  40. .init : 0xc072a000 - 0xc0759000 ( 188 kB)
  41. .data : 0xc075a000 - 0xc07ba980 ( 387 kB)
  42. .bss : 0xc07ba9a4 - 0xc0967d78 (1717 kB)
  43. SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  44. NR_IRQS:128
  45. sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  46. Console: colour dummy device 80x30
  47. Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  48. pid_max: default: 32768 minimum: 301
  49. Mount-cache hash table entries: 512
  50. Initializing cgroup subsys cpuacct
  51. Initializing cgroup subsys devices
  52. Initializing cgroup subsys freezer
  53. Initializing cgroup subsys blkio
  54. CPU: Testing write buffer coherency: ok
  55. hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  56. Setting up static identity map for 0x40520248 - 0x405202a0
  57. devtmpfs: initialized
  58. dummy:
  59. NET: Registered protocol family 16
  60. DMA: preallocated 256 KiB pool for atomic coherent allocations
  61. hw-breakpoint: debug architecture 0x4 unsupported.
  62. Init eGon pin module V2.0
  63. SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  64. Initialize DMAC OK
  65. bio: create slab <bio-0> at 0
  66. sunxi_gpio driver init ver 1.3
  67. gpiochip_add: registered GPIOs 1 to 4 on device: A1X_GPIO
  68. SCSI subsystem initialized
  69. libata version 3.00 loaded.
  70. usbcore: registered new interface driver usbfs
  71. usbcore: registered new interface driver hub
  72. usbcore: registered new device driver usb
  73. Advanced Linux Sound Architecture Driver Version 1.0.25.
  74. cfg80211: Calling CRDA to update world regulatory domain
  75. Switching to clocksource aw_64bits_counter
  76. FS-Cache: Loaded
  77. CacheFiles: Loaded
  78. NET: Registered protocol family 2
  79. IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  80. TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  81. TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
  82. TCP: Hash tables configured (established 131072 bind 65536)
  83. TCP: reno registered
  84. UDP hash table entries: 512 (order: 1, 8192 bytes)
  85. UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
  86. NET: Registered protocol family 1
  87. RPC: Registered named UNIX socket transport module.
  88. RPC: Registered udp transport module.
  89. RPC: Registered tcp transport module.
  90. RPC: Registered tcp NFSv4.1 backchannel transport module.
  91. audit: initializing netlink socket (disabled)
  92. type=2000 audit(0.060:1): initialized
  93. highmem bounce pool size: 64 pages
  94. VFS: Disk quotas dquot_6.5.2
  95. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  96. NFS: Registering the id_resolver key type
  97. NTFS driver 2.1.30 [Flags: R/W].
  98. fuse init (API version 7.18)
  99. msgmni has been set to 1386
  100. alg: comp: Compression test 1 failed for lzo-generic: output len = 57
  101. alg: No test for stdrng (krng)
  102. Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  103. io scheduler noop registered
  104. io scheduler deadline registered
  105. io scheduler cfq registered (default)
  106. sunxi disp driver loaded (/dev/disp api 1.0)
  107. Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  108. [uart]: used uart info.: 0x05
  109. [uart]: serial probe 0 irq 1 mapbase 0x01c28000
  110. sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  111. console [ttyS0] enabled
  112. [uart]: serial probe 2 irq 3 mapbase 0x01c28800
  113. sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  114. G2D: drv_g2d_init
  115. G2D: g2dmem: g2d_start=50000000, g2d_size=1000000
  116. G2D: head:d0000000,tail:d1000000
  117. G2D: Module initialized.major:251
  118. [drm] Initialized drm 1.1.0 20060810
  119. brd: module loaded
  120. loop: module loaded
  121. [NAND] nand driver version: 0x2 0x9
  122. Dev Sunxi softw311 nand: part 1, start 32768, size 32768
  123. Dev Sunxi softw311 nand: part 2, start 65536, size 32768
  124. Dev Sunxi softw311 nand: part 3, start 98304, size 65536
  125. Dev Sunxi softw311 nand: part 4, start 163840, size 1048576
  126. Dev Sunxi softw311 nand: part 5, start 1212416, size 3145728
  127. Dev Sunxi softw311 nand: part 6, start 4358144, size 32768
  128. Dev Sunxi softw311 nand: part 7, start 4390912, size 65536
  129. Dev Sunxi softw311 nand: part 8, start 4456448, size 262144
  130. Dev Sunxi softw311 nand: part 9, start 4718592, size 32768
  131. Dev Sunxi softw311 nand: part 10, start 4751360, size 1048576
  132. Dev Sunxi softw311 nand: part 11, start 5799936, size 1982464
  133. nand: nanda nandb nandc nandd nande nandf nandg nandh nandi nandj nandk
  134. [NAND]nand driver, ok.
  135. AHCI is disabled in script.bin
  136. [spi]: sw spi init !!
  137. [spi]: Found 0 spi devices in config files
  138. [spi]: boards num modalias max_spd_hz bus_num cs mode
  139. spi: cannot find any using configuration for all 4 spi controllers, return directly!
  140. emac driver is disabled
  141. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  142. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  143. [sw-ehci1]: open clock
  144. [sw-ehci1]: Set USB Power ON
  145. sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  146. sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 1
  147. sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
  148. sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  149. ehci_irq: port change detect
  150. hub 1-0:1.0: USB hub found
  151. hub 1-0:1.0: 1 port detected
  152. [sw-ohci1]: open clock
  153. sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  154. sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
  155. sw-ohci sw-ohci.1: irq 64, io mem 0x01c14400
  156. hub 2-0:1.0: USB hub found
  157. hub 2-0:1.0: 1 port detected
  158. [sw-ehci2]: open clock
  159. [sw-ehci2]: Set USB Power ON
  160. sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  161. sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 3
  162. sw-ehci sw-ehci.2: irq 40, io mem 0x01c1c000
  163. sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00
  164. ehci_irq: port change detect
  165. hub 3-0:1.0: USB hub found
  166. hub 3-0:1.0: 1 port detected
  167. [sw-ohci2]: open clock
  168. sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
  169. sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 4
  170. sw-ohci sw-ohci.2: irq 65, io mem 0x01c1c400
  171. ehci_irq: port change detect
  172. hub 4-0:1.0: USB hub found
  173. hub 4-0:1.0: 1 port detected
  174. Initializing USB Mass Storage driver...
  175. usbcore: registered new interface driver usb-storage
  176. USB Mass Storage support registered.
  177. usbcore: registered new interface driver ums-alauda
  178. usbcore: registered new interface driver ums-cypress
  179. usbcore: registered new interface driver ums-datafab
  180. usbcore: registered new interface driver ums_eneub6250
  181. The port change to OHCI now!
  182. usbcore: registered new interface driver ums-freecom
  183. usbcore: registered new interface driver ums-isd200
  184. usbcore: registered new interface driver ums-jumpshot
  185. usbcore: registered new interface driver ums-karma
  186. usbcore: registered new interface driver ums-onetouch
  187. usbcore: registered new interface driver ums-realtek
  188. usbcore: registered new interface driver ums-sddr09
  189. usbcore: registered new interface driver ums-sddr55
  190. usbcore: registered new interface driver ums-usbat
  191. mousedev: PS/2 mouse device common for all mice
  192. sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed.
  193. sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong!
  194. sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0
  195. i2c /dev entries driver
  196. config i2c gpio with gpio_config api
  197. axp_mfd 0-0034: AXP (CHIP ID: 0x21) detected
  198. I2C: i2c-0: AW16XX I2C adapter
  199. I2C: i2c-1: AW16XX I2C adapter
  200. I2C: i2c-2: AW16XX I2C adapter
  201. lirc_dev: IR Remote Control driver registered, major 250
  202. IR NEC protocol handler initialized
  203. IR RC5(x) protocol handler initialized
  204. IR RC6 protocol handler initialized
  205. IR JVC protocol handler initialized
  206. IR Sony protocol handler initialized
  207. IR RC5 (streamzap) protocol handler initialized
  208. IR SANYO protocol handler initialized
  209. IR MCE Keyboard/mouse protocol handler initialized
  210. IR LIRC bridge handler initialized
  211. Device driver sunxi-cir version 1.1
  212. Registered IR keymap rc-empty
  213. input: sunxi-cir as /devices/virtual/rc/rc0/input0
  214. rc0: sunxi-cir as /devices/virtual/rc/rc0
  215. input: MCE IR Keyboard/Mouse (sunxi-cir) as /devices/virtual/input/input1
  216. rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-cir) registered at minor = 0
  217. IR clock rate: 8000000Hz
  218. IR sample period: 8000ns
  219. [cedar dev]: install start!!!
  220. [cedar dev]: install end!!!
  221. [tt]----- avs_dev driver load... ----
  222. [tt]----- register iomem ----
  223. [tt]--- avs_dev driver load ok!! -----
  224. [ace_drv] start!!!
  225. [ace_drv] init end!!!
  226. [pa_drv] start!!!
  227. [pa_drv] init end!!!
  228. axp20_ldo1: 1300 mV
  229. axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
  230. usb 2-1: new full-speed USB device number 2 using sw-ohci
  231. axp20_ldo3: 700 <--> 3500 mV at 2800 mV
  232. axp20_ldo4: 1250 <--> 3300 mV at 2800 mV
  233. axp20_buck2: 700 <--> 2275 mV at 1400 mV
  234. axp20_buck3: 700 <--> 3500 mV at 1250 mV
  235. axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
  236. input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input2
  237. axp20_ldo2: Failed to create debugfs directory
  238. cpuidle: using governor ladder
  239. cpuidle: using governor menu
  240. [mmc_pm]: no sdio card used in configuration
  241. [mmc]: sunximmc_init
  242. [mmc]: sunxi mmc controller using config : 0x9
  243. [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
  244. [mmc]: mmc 0 power off !!
  245. [mmc]: mmc0 Probe: base:0xf1c0f000 irq:32 dma:0 pdes:0xc1000000, ret 0.
  246. [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
  247. [mmc]: mmc 3 power off !!
  248. [mmc]: mmc3 Probe: base:0xf1c12000 irq:35 dma:0 pdes:0xc1004000, ret 0.
  249. sunxi_leds driver init
  250. sunxi leds can't find script data '[leds_para]' 'leds_used'
  251. usbcore: registered new interface driver usbhid
  252. usbhid: USB HID core driver
  253. logger: created 256K log 'log_main'
  254. logger: created 256K log 'log_events'
  255. logger: created 256K log 'log_radio'
  256. logger: created 256K log 'log_system'
  257. IPv4 over IPv4 tunneling driver
  258. TCP: cubic registered
  259. Initializing XFRM netlink socket
  260. NET: Registered protocol family 17
  261. NET: Registered protocol family 15
  262. 8021q: 802.1Q VLAN Support v1.8
  263. [mmc_pm]: No sdio card, please check your config !!
  264. Registering the dns_resolver key type
  265. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  266. Registering SWP/SWPB emulation handler
  267. axp20_buck2: Failed to create debugfs directory
  268. registered taskstats version 1
  269. input: 2.4G Wireless Receiver as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.0/input/input3
  270. generic-usb 0003:1915:AF11.0001: input: USB HID v1.11 Keyboard [2.4G Wireless Receiver ] on usb-sw-ohci-1/input0
  271. input: 2.4G Wireless Receiver as /devices/platform/sw-ohci.1/usb2/2-1/2-1:1.1/input/input4
  272. generic-usb 0003:1915:AF11.0002: input: USB HID v1.11 Mouse [2.4G Wireless Receiver ] on usb-sw-ohci-1/input1
  273. generic-usb 0003:1915:AF11.0003: claimed by neither input, hiddev nor hidraw
  274. I2C: i2c-3: HDMI I2C adapter
  275. ParseEDID
  276. EDID version: 1.3
  277. PCLK=85500000 X 1366 1436 1579 1792 Y 768 771 774 798 fr 59 PP
  278. PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP
  279. Using above mode as preferred EDID mode
  280. Unimplemented SVD code 16
  281. Unimplemented SVD code 31
  282. Unimplemented SVD code 33
  283. Unimplemented SVD code 34
  284. Unimplemented SVD code 22
  285. disp_clk: Could not find a matching pll-freq for 53900000 pclk
  286. usb 3-1: new high-speed USB device number 2 using sw-ehci
  287. disp_clk: Could not find a matching pll-freq for 108100000 pclk
  288. disp_clk: Could not find a matching pll-freq for 53900000 pclk
  289. disp_clk: Could not find a matching pll-freq for 74200000 pclk
  290. disp_clk: Could not find a matching pll-freq for 74600000 pclk
  291. disp_clk: Could not find a matching pll-freq for 78800000 pclk
  292. disp_clk: Could not find a matching pll-freq for 53450000 pclk
  293. disp_clk: Could not find a matching pll-freq for 27100000 pclk
  294. disp_clk: Could not find a matching pll-freq for 26150000 pclk
  295. Parse_VideoData_Block: VIC 4 (native) support
  296. Parse_VideoData_Block: VIC 19 support
  297. Parse_VideoData_Block: VIC 5 support
  298. Parse_VideoData_Block: VIC 20 support
  299. Parse_VideoData_Block: VIC 3 support
  300. Parse_VideoData_Block: VIC 18 support
  301. Parse_VideoData_Block: VIC 16 support
  302. Parse_VideoData_Block: VIC 31 support
  303. Parse_VideoData_Block: VIC 32 support
  304. Parse_VideoData_Block: VIC 33 support
  305. Parse_VideoData_Block: VIC 34 support
  306. Parse_VideoData_Block: VIC 7 support
  307. Parse_VideoData_Block: VIC 22 support
  308. Parse_AudioData_Block: max channel=2
  309. Parse_AudioData_Block: SampleRate code=7
  310. Parse_AudioData_Block: WordLen code=7
  311. Find HDMI Vendor Specific DataBlock
  312. PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP
  313. PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP
  314. PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP
  315. PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 NN
  316. PCLK=27000000 X 720 736 798 858 Y 480 489 495 525 fr 59 NN
  317. asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
  318. waited 0 ms for EDID info
  319. disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  320. [mmc]: mmc 0 detect change, present 1
  321. Console: switching to colour frame buffer device 160x45
  322. axp20_buck3: incomplete constraints, leaving on
  323. axp20_buck2: incomplete constraints, leaving on
  324. axp20_ldo4: incomplete constraints, leaving on
  325. axp20_ldo3: incomplete constraints, leaving on
  326. axp20_ldo2: incomplete constraints, leaving on
  327. axp20_ldo1: incomplete constraints, leaving on
  328. sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000)
  329. ALSA device list:
  330. #0: sunxi-CODEC Audio Codec
  331. #1: sunxi-sndhdmi
  332. Waiting for root device /dev/mmcblk0p2...
  333. [mmc]: mmc 0 power on !!
  334. [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
  335. [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 52, RTO !!
  336. [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  337. [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  338. [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  339. [mmc]: sdxc_request_done(L1118): smc 0 err, cmd 5, RTO !!
  340. mmc0: new high speed SD card at address 0001
  341. mmcblk0: mmc0:0001 00000 1.83 GiB
  342. mmcblk0: p1 p2
  343. EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  344. VFS: Mounted root (ext4 filesystem) on device 179:2.
  345. devtmpfs: mounted
  346. Freeing init memory: 188K
  347. systemd[1]: Failed to insert module 'ipv6'
  348. systemd-journald[56]: Vacuuming done, freed 0 bytes
  349. systemd-udevd[64]: starting version 208
  350. warning: process `lspci' used the deprecated sysctl system call with 8.1.2.
  351. systemd-journald[56]: Received request to flush runtime journal from PID 1
  352. Warning: this sunxi disp driver will see significant redesign.
  353. Applications using /dev/disp directly will break.
  354. For more information visit: http://linux-sunxi.org/Sunxi_disp_driver
  355. [DISP] layer released: 0,101
  356. [DISP] released layer not allocated in this session: 0,101
  357. [DISP] layer allocated: 0,101
  358. Alignment trap: not handling ldm with s-bit set
  359. Alignment trap: not handling ldm with s-bit set
  360. Alignment trap: not handling instruction 58454547 at [<024fce44>]
  361. Alignment trap: not handling instruction 58454547 at [<024fce44>]
  362. Unhandled fault: alignment exception (0x801) at 0x341fed53
  363. Unhandled fault: alignment exception (0x801) at 0x34bfed53
  364. [DISP] layer allocated at close: 0,101
  365. [DISP] layer released: 0,101
  366. [DISP] released layer not allocated in this session: 0,101
  367. [DISP] layer allocated: 0,101
  368. Alignment trap: not handling ldm with s-bit set
  369. Alignment trap: not handling instruction 69766564 at [<011b9c3c>]
  370. Unhandled fault: alignment exception (0x001) at 0x00000049
  371. [DISP] layer allocated at close: 0,101
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!