Attempting connection at \\.\COM12...
  Testing plaintext communication protocol...
READ: ok
  Connected to machine!
SENT: T0
READ: echo:Active Extruder: 0
Active Extruder: 0
READ: ok
SENT: M105
READ: ok T:29.09 /0.00 B:0.00 /0.00 @:0 B@:0
SENT: M105
READ: ok T:29.09 /0.00 B:0.00 /0.00 @:0 B@:0
SENT: M122
READ: 		X
READ: Enabled		false
READ: Set current	800
READ: RMS current	1436
READ: MAX current	2025
READ: Run current	25/31
READ: Hold current	12/31
READ: CS actual		0/31
READ: PWM scale		0
READ: vsense		0=.325
READ: stealthChop	false
READ: msteps		256
READ: tstep		0
READ: pwm
READ: threshold		0
READ: [mm/s]		-
READ: OT prewarn	false
READ: OT prewarn has
READ: been triggered	false
READ: off time		0
READ: blank time	16
READ: hysteresis
READ: -end		-3
READ: -start		1
READ: Stallguard thrs
READ: DRVSTATUS	X
READ: stst
READ: olb
READ: ola
READ: s2gb
READ: s2ga
READ: otpw
READ: ot
READ: 157C
READ: 150C
READ: 143C
READ: 120C
READ: s2vsa
READ: s2vsb
READ: Driver registers:	X = 0x00:00:00:00
READ:
READ:
READ: ok
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
SENT: M105
WARNING: Device unplugged while connected to port
Disconnected.