SHARE
TWEET

Untitled

a guest Nov 8th, 2016 87 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [   10.565567] ======== bcm_wlan_set_plat_data ========
  2. [   10.565622] bcm_wlan_get_oob_irq enter.
  3. [   10.565783] gpio [202] map to virq [10] ok
  4. [   10.565802] host_oob_irq: 10
  5. [   10.565817] host_oob_irq_flags=0x414
  6. [   10.565840] dhd_wifi_platform_load: Enter
  7. [   10.565912] Power-up adapter 'DHD generic adapter'
  8. [   10.565940] wifi_platform_set_power = 1
  9. [   10.565958] ======== PULL WL_REG_ON HIGH! ========
  10. [   10.565986] [wifi_pm]: set wl_reg_on 0 !
  11. [   10.681626] vmouse_input_dev_open
  12. [   10.740936] systemd[1]: Started Journal Service.
  13. [   10.760316] vmouse_input_dev_close
  14. [   11.016992] [wifi_pm]: set wl_reg_on 1 !
  15. [   11.480921] systemd-journald[237]: Received request to flush runtime journal from PID 1
  16. [   11.592811] gmac0: probed
  17. [   11.593331] gmac0 gmac0: eth0: eth0: PHY ID 00441400 at 0 IRQ poll (gmac0-0:00)
  18. [   12.160141] wifi_platform_bus_enumerate device present 1
  19. [   12.160170] ======== Card detection to detect SDIO card! ========
  20. [   14.160250] failed to power up DHD generic adapter, 3 retry left
  21. [   14.176660] wifi_platform_set_power = 0
  22. [   14.176693] ======== PULL WL_REG_ON LOW! ========
  23. [   14.176720] wifi_platform_bus_enumerate device present 0
  24. [   14.176739] ======== Card detection to remove SDIO card! ========
  25. [   14.176803] wifi_platform_set_power = 1
  26. [   14.176824] ======== PULL WL_REG_ON HIGH! ========
  27. [   14.176851] [wifi_pm]: set wl_reg_on 0 !
  28. [   14.180479] mmc1: card 0001 removed
  29. [   14.180978] [mmc]: sdc1 power_supply is null
  30. [   14.394371] [wifi_pm]: set wl_reg_on 1 !
  31. [   14.900184] wifi_platform_bus_enumerate device present 1
  32. [   14.900219] ======== Card detection to detect SDIO card! ========
  33. [   14.901946] [mmc]: sdc1 power_supply is null
  34. [   14.967200] mmc1: new high speed SDIO card at address 0001
  35. [   16.590286] PHY: gmac0-0:00 - Link is Up - 100/Full
  36. [   16.900144] failed to power up DHD generic adapter, 2 retry left
  37. [   16.916562] wifi_platform_set_power = 0
  38. [   16.916592] ======== PULL WL_REG_ON LOW! ========
  39. [   16.916611] wifi_platform_bus_enumerate device present 0
  40. [   16.916628] ======== Card detection to remove SDIO card! ========
  41. [   16.916688] wifi_platform_set_power = 1
  42. [   16.916713] ======== PULL WL_REG_ON HIGH! ========
  43. [   16.916732] [wifi_pm]: set wl_reg_on 0 !
  44. [   16.917685] mmc1: card 0001 removed
  45. [   16.918185] [mmc]: sdc1 power_supply is null
  46. [   17.116815] [wifi_pm]: set wl_reg_on 1 !
  47. [   17.620157] wifi_platform_bus_enumerate device present 1
  48. [   17.620190] ======== Card detection to detect SDIO card! ========
  49. [   17.621904] [mmc]: sdc1 power_supply is null
  50. [   17.677386] mmc1: new high speed SDIO card at address 0001
  51. [   19.620074] failed to power up DHD generic adapter, 1 retry left
  52. [   19.636275] wifi_platform_set_power = 0
  53. [   19.636288] ======== PULL WL_REG_ON LOW! ========
  54. [   19.636298] wifi_platform_bus_enumerate device present 0
  55. [   19.636307] ======== Card detection to remove SDIO card! ========
  56. [   19.636338] wifi_platform_set_power = 1
  57. [   19.636346] ======== PULL WL_REG_ON HIGH! ========
  58. [   19.636356] [wifi_pm]: set wl_reg_on 0 !
  59. [   19.636584] mmc1: card 0001 removed
  60. [   19.636855] [mmc]: sdc1 power_supply is null
  61. [   19.836409] [wifi_pm]: set wl_reg_on 1 !
  62. [   20.340099] wifi_platform_bus_enumerate device present 1
  63. [   20.340111] ======== Card detection to detect SDIO card! ========
  64. [   20.341717] [mmc]: sdc1 power_supply is null
  65. [   20.396872] mmc1: new high speed SDIO card at address 0001
  66. [   22.330121] eth0: no IPv6 routers present
  67. [   22.340287] failed to power up DHD generic adapter, 0 retry left
  68. [   22.356818] wifi_platform_set_power = 0
  69. [   22.356859] ======== PULL WL_REG_ON LOW! ========
  70. [   22.356897] wifi_platform_bus_enumerate device present 0
  71. [   22.356931] ======== Card detection to remove SDIO card! ========
  72. [   22.357026] failed to power up DHD generic adapter, max retry reached**
  73. [   22.357136] unregister wifi platform drivers
  74. [   22.357175] wifi_platform_bus_enumerate device present 0
  75. [   22.357209] ======== Card detection to remove SDIO card! ========
  76. [   22.357294] dhd_module_init: Failed to load the driver, try cnt 3
  77. [   22.357442] ======== bcm_wlan_set_plat_data ========
  78. [   22.357489] bcm_wlan_get_oob_irq enter.
  79. [   22.357537] gpio [202] map to virq [10] ok
  80. [   22.357567] host_oob_irq: 10
  81. [   22.357594] host_oob_irq_flags=0x414
  82. [   22.357624] dhd_wifi_platform_load: Enter
  83. [   22.357667] mmc1: card 0001 removed
  84. [   22.357705] Power-up adapter 'DHD generic adapter'
  85. [   22.357742] wifi_platform_set_power = 1
  86. [   22.357772] ======== PULL WL_REG_ON HIGH! ========
  87. [   22.357807] [wifi_pm]: set wl_reg_on 0 !
  88. [   22.358576] [mmc]: sdc1 power_supply is null
  89. [   22.562760] [wifi_pm]: set wl_reg_on 1 !
  90. [   23.070085] wifi_platform_bus_enumerate device present 1
  91. [   23.070100] ======== Card detection to detect SDIO card! ========
  92. [   23.071776] [mmc]: sdc1 power_supply is null
  93. [   23.131881] mmc1: new high speed SDIO card at address 0001
  94. [   25.070313] failed to power up DHD generic adapter, 3 retry left
  95. [   25.086854] wifi_platform_set_power = 0
  96. [   25.086895] ======== PULL WL_REG_ON LOW! ========
  97. [   25.086932] wifi_platform_bus_enumerate device present 0
  98. [   25.086966] ======== Card detection to remove SDIO card! ========
  99. [   25.087067] wifi_platform_set_power = 1
  100. [   25.087099] ======== PULL WL_REG_ON HIGH! ========
  101. [   25.087134] [wifi_pm]: set wl_reg_on 0 !
  102. [   25.087763] mmc1: card 0001 removed
  103. [   25.088690] [mmc]: sdc1 power_supply is null
  104. [   25.287290] [wifi_pm]: set wl_reg_on 1 !
  105. [   25.790073] wifi_platform_bus_enumerate device present 1
  106. [   25.790092] ======== Card detection to detect SDIO card! ========
  107. [   25.791740] [mmc]: sdc1 power_supply is null
  108. [   25.848340] mmc1: new high speed SDIO card at address 0001
  109. [   27.790080] failed to power up DHD generic adapter, 2 retry left
  110. [   27.806289] wifi_platform_set_power = 0
  111. [   27.806303] ======== PULL WL_REG_ON LOW! ========
  112. [   27.806312] wifi_platform_bus_enumerate device present 0
  113. [   27.806321] ======== Card detection to remove SDIO card! ========
  114. [   27.806353] wifi_platform_set_power = 1
  115. [   27.806360] ======== PULL WL_REG_ON HIGH! ========
  116. [   27.806370] [wifi_pm]: set wl_reg_on 0 !
  117. [   27.806577] mmc1: card 0001 removed
  118. [   27.806847] [mmc]: sdc1 power_supply is null
  119. [   28.006460] [wifi_pm]: set wl_reg_on 1 !
  120. [   28.510070] wifi_platform_bus_enumerate device present 1
  121. [   28.510090] ======== Card detection to detect SDIO card! ========
  122. [   28.511686] [mmc]: sdc1 power_supply is null
  123. [   28.567257] mmc1: new high speed SDIO card at address 0001
  124. [   30.510252] failed to power up DHD generic adapter, 1 retry left
  125. [   30.526775] wifi_platform_set_power = 0
  126. [   30.526814] ======== PULL WL_REG_ON LOW! ========
  127. [   30.526852] wifi_platform_bus_enumerate device present 0
  128. [   30.526887] ======== Card detection to remove SDIO card! ========
  129. [   30.526971] wifi_platform_set_power = 1
  130. [   30.527002] ======== PULL WL_REG_ON HIGH! ========
  131. [   30.527037] [wifi_pm]: set wl_reg_on 0 !
  132. [   30.527648] mmc1: card 0001 removed
  133. [   30.528560] [mmc]: sdc1 power_supply is null
  134. [   30.727248] [wifi_pm]: set wl_reg_on 1 !
  135. [   31.230130] wifi_platform_bus_enumerate device present 1
  136. [   31.230143] ======== Card detection to detect SDIO card! ========
  137. [   31.231825] [mmc]: sdc1 power_supply is null
  138. [   31.291747] mmc1: new high speed SDIO card at address 0001
  139. [   33.230397] failed to power up DHD generic adapter, 0 retry left
  140. [   33.246933] wifi_platform_set_power = 0
  141. [   33.246975] ======== PULL WL_REG_ON LOW! ========
  142. [   33.247013] wifi_platform_bus_enumerate device present 0
  143. [   33.247047] ======== Card detection to remove SDIO card! ========
  144. [   33.247135] failed to power up DHD generic adapter, max retry reached**
  145. [   33.247256] unregister wifi platform drivers
  146. [   33.247294] wifi_platform_bus_enumerate device present 0
  147. [   33.247327] ======== Card detection to remove SDIO card! ========
  148. [   33.247419] dhd_module_init: Failed to load the driver, try cnt 2
  149. [   33.247568] ======== bcm_wlan_set_plat_data ========
  150. [   33.247616] bcm_wlan_get_oob_irq enter.
  151. [   33.247665] gpio [202] map to virq [10] ok
  152. [   33.247696] host_oob_irq: 10
  153. [   33.247723] host_oob_irq_flags=0x414
  154. [   33.247752] dhd_wifi_platform_load: Enter
  155. [   33.247785] mmc1: card 0001 removed
  156. [   33.247874] Power-up adapter 'DHD generic adapter'
  157. [   33.247912] wifi_platform_set_power = 1
  158. [   33.247942] ======== PULL WL_REG_ON HIGH! ========
  159. [   33.247977] [wifi_pm]: set wl_reg_on 0 !
  160. [   33.248700] [mmc]: sdc1 power_supply is null
  161. [   33.448425] [wifi_pm]: set wl_reg_on 1 !
  162. [   33.950332] wifi_platform_bus_enumerate device present 1
  163. [   33.950379] ======== Card detection to detect SDIO card! ========
  164. [   33.952170] [mmc]: sdc1 power_supply is null
  165. [   34.011528] mmc1: new high speed SDIO card at address 0001
  166. [   35.950301] failed to power up DHD generic adapter, 3 retry left
  167. [   35.966838] wifi_platform_set_power = 0
  168. [   35.966878] ======== PULL WL_REG_ON LOW! ========
  169. [   35.966916] wifi_platform_bus_enumerate device present 0
  170. [   35.966950] ======== Card detection to remove SDIO card! ========
  171. [   35.967043] wifi_platform_set_power = 1
  172. [   35.967073] ======== PULL WL_REG_ON HIGH! ========
  173. [   35.967109] [wifi_pm]: set wl_reg_on 0 !
  174. [   35.967728] mmc1: card 0001 removed
  175. [   35.968646] [mmc]: sdc1 power_supply is null
  176. [   36.168528] [wifi_pm]: set wl_reg_on 1 !
  177. [   36.670196] wifi_platform_bus_enumerate device present 1
  178. [   36.670242] ======== Card detection to detect SDIO card! ========
  179. [   36.672026] [mmc]: sdc1 power_supply is null
  180. [   36.732011] mmc1: new high speed SDIO card at address 0001
  181. [   38.670086] failed to power up DHD generic adapter, 2 retry left
  182. [   38.686280] wifi_platform_set_power = 0
  183. [   38.686291] ======== PULL WL_REG_ON LOW! ========
  184. [   38.686300] wifi_platform_bus_enumerate device present 0
  185. [   38.686307] ======== Card detection to remove SDIO card! ========
  186. [   38.686336] wifi_platform_set_power = 1
  187. [   38.686343] ======== PULL WL_REG_ON HIGH! ========
  188. [   38.686352] [wifi_pm]: set wl_reg_on 0 !
  189. [   38.686550] mmc1: card 0001 removed
  190. [   38.686785] [mmc]: sdc1 power_supply is null
  191. [   38.886427] [wifi_pm]: set wl_reg_on 1 !
  192. [   39.390068] wifi_platform_bus_enumerate device present 1
  193. [   39.390089] ======== Card detection to detect SDIO card! ========
  194. [   39.391688] [mmc]: sdc1 power_supply is null
  195. [   39.446852] mmc1: new high speed SDIO card at address 0001
  196. [   41.390230] failed to power up DHD generic adapter, 1 retry left
  197. [   41.406765] wifi_platform_set_power = 0
  198. [   41.406805] ======== PULL WL_REG_ON LOW! ========
  199. [   41.406843] wifi_platform_bus_enumerate device present 0
  200. [   41.406877] ======== Card detection to remove SDIO card! ========
  201. [   41.406965] wifi_platform_set_power = 1
  202. [   41.406996] ======== PULL WL_REG_ON HIGH! ========
  203. [   41.407031] [wifi_pm]: set wl_reg_on 0 !
  204. [   41.407637] mmc1: card 0001 removed
  205. [   41.408560] [mmc]: sdc1 power_supply is null
  206. [   41.607302] [wifi_pm]: set wl_reg_on 1 !
  207. [   42.110231] wifi_platform_bus_enumerate device present 1
  208. [   42.110276] ======== Card detection to detect SDIO card! ========
  209. [   42.112063] [mmc]: sdc1 power_supply is null
  210. [   42.171507] mmc1: new high speed SDIO card at address 0001
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top