SHARE
TWEET

Untitled

a guest Oct 15th, 2016 278 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. LibreELEC:~ # dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Linux version 4.8.1 (libreelec.tv@nmacleod.com) (gcc version 5.4.0 (GCC) ) #1 SMP Tue Oct 11 04:30:28 BST 2016
  4. [    0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  5. [    0.000000] CPU: div instructions available: patching division code
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [    0.000000] OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
  8. [    0.000000] cma: Reserved 8 MiB at 0x2a400000
  9. [    0.000000] Memory policy: Data cache writealloc
  10. [    0.000000] On node 0 totalpages: 176128
  11. [    0.000000] free_area_init_node: node 0, pgdat 80c33440, node_mem_map a9df4000
  12. [    0.000000]   Normal zone: 1548 pages used for memmap
  13. [    0.000000]   Normal zone: 0 pages reserved
  14. [    0.000000]   Normal zone: 176128 pages, LIFO batch:31
  15. [    0.000000] percpu: Embedded 13 pages/cpu @aafab000 s24460 r8192 d20596 u53248
  16. [    0.000000] pcpu-alloc: s24460 r8192 d20596 u53248 alloc=13*4096
  17. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  18. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 174580
  19. [    0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=720 bcm2709.boardrev=0xa02082 bcm2709.serial=0x45d0e5f5 smsc95xx.macaddr=B8:27:EB:D0:E5:F5 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000  boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1
  20. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  21. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  22. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [    0.000000] Memory: 677116K/704512K available (6144K kernel code, 210K rwdata, 1240K rodata, 3072K init, 398K bss, 19204K reserved, 8192K cma-reserved)
  24. [    0.000000] Virtual kernel memory layout:
  25. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  26. [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  27. [    0.000000]     vmalloc : 0xab800000 - 0xff800000   (1344 MB)
  28. [    0.000000]     lowmem  : 0x80000000 - 0xab000000   ( 688 MB)
  29. [    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
  30. [    0.000000]       .text : 0x80008000 - 0x80700000   (7136 kB)
  31. [    0.000000]       .init : 0x80900000 - 0x80c00000   (3072 kB)
  32. [    0.000000]       .data : 0x80c00000 - 0x80c349e8   ( 211 kB)
  33. [    0.000000]        .bss : 0x80c36000 - 0x80c99aac   ( 399 kB)
  34. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  35. [    0.000000] Hierarchical RCU implementation.
  36. [    0.000000]  Build-time adjustment of leaf fanout to 32.
  37. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  38. [    0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  39. [    0.000000] arm_arch_timer: WARNING: Please fix your firmware
  40. [    0.000000] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  41. [    0.000000] arm_arch_timer: WARNING: Please fix your firmware
  42. [    0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
  43. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  44. [    0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  45. [    0.000018] Switching to timer-based delay loop, resolution 52ns
  46. [    0.000193] Console: colour dummy device 80x30
  47. [    0.000212] console [tty0] enabled
  48. [    0.000232] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
  49. [    0.000245] pid_max: default: 32768 minimum: 301
  50. [    0.000392] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  51. [    0.000400] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  52. [    0.001195] Disabling cpuset control group subsystem
  53. [    0.001296] CPU: Testing write buffer coherency: ok
  54. [    0.001736] CPU0: update cpu_capacity 1024
  55. [    0.001743] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  56. [    0.001792] Setting up static identity map for 0x100000 - 0x100034
  57. [    0.003629] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  58. [    0.003633] arm_arch_timer: WARNING: Please fix your firmware
  59. [    0.003641] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  60. [    0.003643] arm_arch_timer: WARNING: Please fix your firmware
  61. [    0.003654] CPU1: update cpu_capacity 1024
  62. [    0.003660] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  63. [    0.004235] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  64. [    0.004238] arm_arch_timer: WARNING: Please fix your firmware
  65. [    0.004242] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  66. [    0.004245] arm_arch_timer: WARNING: Please fix your firmware
  67. [    0.004253] CPU2: update cpu_capacity 1024
  68. [    0.004259] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  69. [    0.004795] arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
  70. [    0.004798] arm_arch_timer: WARNING: Please fix your firmware
  71. [    0.004802] arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
  72. [    0.004804] arm_arch_timer: WARNING: Please fix your firmware
  73. [    0.004813] CPU3: update cpu_capacity 1024
  74. [    0.004818] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  75. [    0.004887] Brought up 4 CPUs
  76. [    0.004897] SMP: Total of 4 processors activated (153.00 BogoMIPS).
  77. [    0.004902] CPU: All CPU(s) started in HYP mode.
  78. [    0.004905] CPU: Virtualization extensions available.
  79. [    0.005438] devtmpfs: initialized
  80. [    0.014737] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  81. [    0.014881] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  82. [    0.015291] pinctrl core: initialized pinctrl subsystem
  83. [    0.015731] NET: Registered protocol family 16
  84. [    0.020851] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  85. [    0.030008] cpuidle: using governor ladder
  86. [    0.043374] cpuidle: using governor menu
  87. [    0.047318] Serial: AMBA PL011 UART driver
  88. [    0.047422] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  89. [    0.047545] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  90. [    0.090927] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
  91. [    0.092215] SCSI subsystem initialized
  92. [    0.092506] usbcore: registered new interface driver usbfs
  93. [    0.092580] usbcore: registered new interface driver hub
  94. [    0.092659] usbcore: registered new device driver usb
  95. [    0.093573] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-10-04 19:03
  96. [    0.120586] clocksource: Switched to clocksource arch_sys_counter
  97. [    0.128415] NET: Registered protocol family 2
  98. [    0.129089] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  99. [    0.129210] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  100. [    0.129394] TCP: Hash tables configured (established 8192 bind 8192)
  101. [    0.129478] UDP hash table entries: 512 (order: 2, 16384 bytes)
  102. [    0.129519] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  103. [    0.129713] NET: Registered protocol family 1
  104. [    0.130039] RPC: Registered named UNIX socket transport module.
  105. [    0.130043] RPC: Registered udp transport module.
  106. [    0.130047] RPC: Registered tcp transport module.
  107. [    0.130051] RPC: Registered tcp NFSv4.1 backchannel transport module.
  108. [    0.277371] futex hash table entries: 1024 (order: 4, 65536 bytes)
  109. [    0.277714] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  110. [    0.291414] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  111. [    0.293756] NFS: Registering the id_resolver key type
  112. [    0.293778] Key type id_resolver registered
  113. [    0.293782] Key type id_legacy registered
  114. [    0.293795] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  115. [    0.297159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  116. [    0.297167] io scheduler noop registered (default)
  117. [    0.297172] io scheduler deadline registered
  118. [    0.297459] io scheduler cfq registered
  119. [    0.300023] BCM2708FB: allocated DMA memory ea800000
  120. [    0.300043] BCM2708FB: allocated DMA channel 0 @ f3007000
  121. [    0.326006] Console: switching to colour frame buffer device 160x45
  122. [    1.214479] bcm2835-rng 3f104000.rng: hwrng registered
  123. [    1.214616] vc-cma: Videocore CMA driver
  124. [    1.214622] vc-cma: vc_cma_base      = 0x00000000
  125. [    1.214627] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
  126. [    1.214632] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
  127. [    1.214780] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  128. [    1.226905] brd: module loaded
  129. [    1.227009] loop: module loaded
  130. [    1.229044] nbd: registered device at major 43
  131. [    1.237005] vchiq: vchiq_init_state: slot_zero = 0xaa880000, is_master = 0
  132. [    1.238493] usbcore: registered new interface driver rtsx_usb
  133. [    1.238498] Loading iSCSI transport class v2.0-870.
  134. [    1.238853] iscsi: registered transport (tcp)
  135. [    1.239277] libphy: Fixed MDIO Bus: probed
  136. [    1.239282] tun: Universal TUN/TAP device driver, 1.6
  137. [    1.239285] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  138. [    1.239491] usbcore: registered new interface driver dm9601
  139. [    1.239563] usbcore: registered new interface driver smsc95xx
  140. [    1.239595] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  141. [    1.430500] Core Release: 2.80a
  142. [    1.430508] Setting default values for core params
  143. [    1.430532] Finished setting default values for core params
  144. [    1.621544] Using Buffer DMA mode
  145. [    1.621549] Periodic Transfer Interrupt Enhancement - disabled
  146. [    1.621552] Multiprocessor Interrupt Enhancement - disabled
  147. [    1.621558] OTG VER PARAM: 0, OTG VER FLAG: 0
  148. [    1.621593] Dedicated Tx FIFOs mode
  149. [    1.621870] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xaa814000 dma = 0xea814000 len=9024
  150. [    1.621895] FIQ FSM acceleration enabled for :
  151. [    1.621895] Non-periodic Split Transactions
  152. [    1.621895] Periodic Split Transactions
  153. [    1.621895] High-Speed Isochronous Endpoints
  154. [    1.621895] Interrupt/Control Split Transaction hack enabled
  155. [    1.621900] dwc_otg: Microframe scheduler enabled
  156. [    1.621941] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x8050240c
  157. [    1.621950] WARN::hcd_init_fiq:414: FIQ ASM at 0x80502770 length 36
  158. [    1.621959] WARN::hcd_init_fiq:439: MPHI regs_base at 0xabc2c000
  159. [    1.622012] dwc_otg 3f980000.usb: DWC OTG Controller
  160. [    1.622044] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  161. [    1.622070] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  162. [    1.622112] Init: Port Power? op_state=1
  163. [    1.622116] Init: Power Port (0)
  164. [    1.622287] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  165. [    1.622296] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  166. [    1.622304] usb usb1: Product: DWC OTG Controller
  167. [    1.622311] usb usb1: Manufacturer: Linux 4.8.1 dwc_otg_hcd
  168. [    1.622318] usb usb1: SerialNumber: 3f980000.usb
  169. [    1.622875] hub 1-0:1.0: USB hub found
  170. [    1.622906] hub 1-0:1.0: 1 port detected
  171. [    1.623218] dwc_otg: FIQ enabled
  172. [    1.623222] dwc_otg: NAK holdoff enabled
  173. [    1.623225] dwc_otg: FIQ split-transaction FSM enabled
  174. [    1.623235] Module dwc_common_port init
  175. [    1.623435] usbcore: registered new interface driver usb-storage
  176. [    1.623579] mousedev: PS/2 mouse device common for all mice
  177. [    1.623684] i2c /dev entries driver
  178. [    1.624745] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  179. [    1.624988] bcm2835-cpufreq: min=600000 max=1200000
  180. [    1.625391] sdhci: Secure Digital Host Controller Interface driver
  181. [    1.625395] sdhci: Copyright(c) Pierre Ossman
  182. [    1.625642] sdhost: log_buf @ aa813000 (ea813000)
  183. [    1.625705] sdhost-bcm2835 3f202000.sdhost: could not get clk
  184. [    1.627986] mmc-bcm2835 3f300000.mmc: could not get clk
  185. [    1.628213] sdhci-pltfm: SDHCI platform and OF driver helper
  186. [    1.628552] ledtrig-cpu: registered to indicate activity on CPUs
  187. [    1.628642] hidraw: raw HID events driver (C) Jiri Kosina
  188. [    1.629743] usbcore: registered new interface driver usbhid
  189. [    1.629744] usbhid: USB HID core driver
  190. [    1.631365] NET: Registered protocol family 10
  191. [    1.631911] NET: Registered protocol family 17
  192. [    1.631960] Key type dns_resolver registered
  193. [    1.632206] Registering SWP/SWPB emulation handler
  194. [    1.632481] vc-sm: Videocore shared memory driver
  195. [    1.632486] [vc_sm_connected_init]: start
  196. [    1.632686] [vc_sm_connected_init]: end - returning 0
  197. [    1.633771] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  198. [    1.634108] sdhost: log_buf @ aa817000 (ea817000)
  199. [    1.683926] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  200. [    1.704972] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  201. [    1.704976] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  202. [    1.737276] console [netcon0] enabled
  203. [    1.737277] netconsole: network logging started
  204. [    1.737280] of_cfs_init
  205. [    1.737337] of_cfs_init: OK
  206. [    1.742409] Freeing unused kernel memory: 3072K (80900000 - 80c00000)
  207. [    1.757280] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  208. [    1.758798] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  209. [    1.760317] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  210. [    1.763040] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  211. [    1.778467] mmc0: host does not support reading read-only switch, assuming write-enable
  212. [    1.780824] mmc0: overclocking to 83333333Hz
  213. [    1.780870] mmc0: new high speed SDHC card at address aaaa
  214. [    1.781256] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  215. [    1.787045]  mmcblk0: p1 p2
  216. [    1.812490] random: fast init done
  217. [    1.827335] Indeed it is in host mode hprt0 = 00021501
  218. [    1.851708] mmc1: new high speed SDIO card at address 0001
  219. [    1.997288] usb 1-1: new high-speed USB device number 2 using dwc_otg
  220. [    1.997383] Indeed it is in host mode hprt0 = 00001101
  221. [    2.100683] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
  222. [    2.101001] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
  223. [    2.136798] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  224. [    2.184205] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  225. [    2.184217] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  226. [    2.184792] hub 1-1:1.0: USB hub found
  227. [    2.184875] hub 1-1:1.0: 5 ports detected
  228. [    2.463966] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  229. [    2.506031] systemd[1]: System time before build time, advancing clock.
  230. [    2.538581] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  231. [    2.538861] systemd[1]: Detected architecture arm.
  232. [    2.539118] systemd[1]: Set hostname to <LibreELEC>.
  233. [    2.554124] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  234. [    2.554131] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  235. [    2.556510] smsc95xx v1.0.4
  236. [    2.608978] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:d0:e5:f5
  237. [    2.611357] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  238. [    2.643207] systemd[1]: Listening on udev Control Socket.
  239. [    2.643384] systemd[1]: Listening on Journal Socket.
  240. [    2.644290] systemd[1]: Created slice System Slice.
  241. [    2.670896] systemd[1]: Starting Setup machine-id...
  242. [    2.672581] systemd[1]: Starting Remount Root and Kernel File Systems...
  243. [    2.674206] systemd[1]: Mounting Variable Directory...
  244. [    2.814021] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  245. [    2.897961] systemd-journald[233]: Received request to flush runtime journal from PID 1
  246. [    2.911274] usb 1-1.3: New USB device found, idVendor=15a4, idProduct=9016
  247. [    2.911283] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  248. [    2.911287] usb 1-1.3: Product: DVB-T 2
  249. [    2.911291] usb 1-1.3: Manufacturer: Afatech
  250. [    2.911294] usb 1-1.3: SerialNumber: 010101010600001
  251. [    2.915044] Afatech DVB-T 2: Fixing fullspeed to highspeed interval: 10 -> 7
  252. [    2.915415] input: Afatech DVB-T 2 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.1/0003:15A4:9016.0001/input/input0
  253. [    2.971040] hid-generic 0003:15A4:9016.0001: input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-3f980000.usb-1.3/input1
  254. [    3.159077] random: crng init done
  255. [    3.177268] usb 1-1.4: new low-speed USB device number 5 using dwc_otg
  256. [    3.274952] usb 1-1.4: New USB device found, idVendor=0000, idProduct=0538
  257. [    3.274961] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  258. [    3.274965] usb 1-1.4: Product:  USB OPTICAL MOUSE
  259. [    3.279404] input:  USB OPTICAL MOUSE as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:0000:0538.0002/input/input1
  260. [    3.279682] hid-generic 0003:0000:0538.0002: input,hidraw1: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-3f980000.usb-1.4/input0
  261. [    3.724684] Console: switching to colour dummy device 80x30
  262. [    3.828894] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  263. [    3.840079] lirc_dev: IR Remote Control driver registered, major 243
  264. [    3.870989] lirc_rpi: module is from the staging directory, the quality is unknown, you have been warned.
  265. [    4.121449] usb 1-1.3: dvb_usb_v2: found a 'Afatech AF9015 reference design' in cold state
  266. [    4.180694] usbcore: registered new interface driver brcmfmac
  267. [    4.199852] usb 1-1.3: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9015.fw'
  268. [    4.277352] usb 1-1.3: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
  269. [    4.332067] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
  270. [    4.354351] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
  271. [    4.520023] uart-pl011 3f201000.serial: no DMA platform data
  272. [    4.593138] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  273. [    4.593279] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  274. [    4.709333] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
  275. [    4.709447] DVB: registering new adapter (Afatech AF9015 reference design)
  276. [    4.729545] i2c i2c-3: af9013: firmware version 5.24.0.0
  277. [    4.731717] usb 1-1.3: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
  278. [    4.750553] mxl5007t 3-00c0: creating new instance
  279. [    4.752592] mxl5007t_get_chip_id: unknown rev (3f)
  280. [    4.752599] mxl5007t_get_chip_id: MxL5007T detected @ 3-00c0
  281. [    4.756339] usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
  282. [    4.756568] DVB: registering new adapter (Afatech AF9015 reference design)
  283. [    4.817288] lirc_rpi: auto-detected active low receiver on GPIO pin 18
  284. [    4.817467] lirc_rpi lirc_rpi: lirc_dev: driver lirc_rpi registered at minor = 0
  285. [    4.817472] lirc_rpi: driver registered!
  286. [    4.961300] input: lircd as /devices/virtual/input/input2
  287. [    5.491385] i2c i2c-3: af9013: found a 'Afatech AF9013' in warm state
  288. [    5.494347] i2c i2c-3: af9013: firmware version 5.24.0.0
  289. [    5.499546] usb 1-1.3: DVB: registering adapter 1 frontend 0 (Afatech AF9013)...
  290. [    5.499776] mxl5007t 3-00c0: attaching existing instance
  291. [    5.512342] Registered IR keymap rc-empty
  292. [    5.512731] input: Afatech AF9015 reference design as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input4
  293. [    5.513808] rc rc0: Afatech AF9015 reference design as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
  294. [    5.513821] usb 1-1.3: dvb_usb_v2: schedule remote query interval to 500 msecs
  295. [    5.513844] usb 1-1.3: dvb_usb_v2: 'Afatech AF9015 reference design' successfully initialized and connected
  296. [    5.513986] usbcore: registered new interface driver dvb_usb_af9015
  297. [    6.131656] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  298. [    6.134585] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  299. [    6.149234] 8021q: 802.1Q VLAN Support v1.8
  300. [    7.170035] usb 1-1.3: DVB: adapter 1 frontend 0 frequency 0 out of range (174000000..862000000)
  301. [    7.439597] usb 1-1.3: dvb_usb_af9015: command failed=2
  302. [    7.439609] i2c i2c-3: af9013: i2c rd failed=-5 reg=d607 len=1
  303. [    7.439990] usb 1-1.3: dvb_usb_af9015: command failed=1
  304. [    7.439999] i2c i2c-3: af9013: i2c wr failed=-5 reg=d607 len=1
  305. [    7.441129] usb 1-1.3: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)
  306. [    8.909641] Bluetooth: Core ver 2.21
  307. [    8.909720] NET: Registered protocol family 31
  308. [    8.909725] Bluetooth: HCI device and connection manager initialized
  309. [    8.909743] Bluetooth: HCI socket layer initialized
  310. [    8.909753] Bluetooth: L2CAP socket layer initialized
  311. [    8.909781] Bluetooth: SCO socket layer initialized
  312. [    8.923849] Bluetooth: HCI UART driver ver 2.3
  313. [    8.923865] Bluetooth: HCI UART protocol H4 registered
  314. [    8.923870] Bluetooth: HCI UART protocol Three-wire (H5) registered
  315. [    8.924812] Bluetooth: HCI UART protocol BCM registered
  316. [   57.806404] usb 1-1.4: USB disconnect, device number 5
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top