Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - IMAGE_VARIANT_STRING=M8996LAB
- S - OEM_IMAGE_VERSION_STRING=crm-ubuntu68
- S - Boot Interface: UFS
- S - Secure Boot: Off
- S - Boot Config @ 0x00076044 = 0x000001c9
- S - JTAG ID @ 0x000760f4 = 0x4003e0e1
- S - OEM ID @ 0x000760f8 = 0x00000000
- S - Serial Number @ 0x00074138 = 0x6099d911
- S - OEM Config Row 0 @ 0x00074188 = 0x0000000000000000
- S - OEM Config Row 1 @ 0x00074190 = 0x0000000000000000
- S - Feature Config Row 0 @ 0x000741a0 = 0x0050000010000100
- S - Feature Config Row 1 @ 0x000741a8 = 0x00fff00001ffffff
- S - Core 0 Frequency, 1228 MHz
- B - 0 - PBL, Start
- B - 10413 - bootable_media_detect_entry, Start
- B - 47504 - bootable_media_detect_success, Start
- B - 47508 - elf_loader_entry, Start
- B - 49059 - auth_hash_seg_entry, Start
- B - 49161 - auth_hash_seg_exit, Start
- B - 82433 - elf_segs_hash_verify_entry, Start
- B - 84934 - PBL, End
- B - 86986 - SBL1, Start
- B - 182969 - usb: hs_phy_nondrive_start
- B - 183305 - usb: PLL lock success - 0x3
- B - 186294 - usb: hs_phy_nondrive_finish
- B - 190442 - boot_flash_init, Start
- D - 0 - boot_flash_init, Delta
- B - 197548 - sbl1_ddr_set_default_params, Start
- D - 0 - sbl1_ddr_set_default_params, Delta
- B - 205539 - boot_config_data_table_init, Start
- D - 198982 - boot_config_data_table_init, Delta - (60 Bytes)
- B - 409035 - CDT Version:3,Platform ID:24,Major ID:1,Minor ID:0,Subtype:0
- B - 413732 - Image Load, Start
- D - 22418 - PMIC Image Loaded, Delta - (37272 Bytes)
- B - 436150 - pm_device_init, Start
- B - 441914 - PON REASON:PM0:0x60 PM1:0x20
- B - 478362 - PM_SET_VAL:Skip
- D - 40046 - pm_device_init, Delta
- B - 480283 - pm_driver_init, Start
- D - 2897 - pm_driver_init, Delta
- B - 486871 - pm_sbl_chg_init, Start
- D - 61 - pm_sbl_chg_init, Delta
- B - 493642 - vsense_init, Start
- D - 30 - vsense_init, Delta
- B - 503189 - Pre_DDR_clock_init, Start
- D - 366 - Pre_DDR_clock_init, Delta
- B - 507245 - ddr_initialize_device, Start
- B - 510936 - 8996 v3.x detected, Max frequency = 1.8 GHz
- B - 520574 - ddr_initialize_device, Delta
- B - 520604 - DDR ID, Rank 0, Rank 1, 0x6, 0x300, 0x300
- B - 524447 - Basic DDR tests done
- B - 593194 - clock_init, Start
- D - 244 - clock_init, Delta
- B - 596549 - Image Load, Start
- D - 4392 - QSEE Dev Config Image Loaded, Delta - (46008 Bytes)
- B - 602009 - Image Load, Start
- D - 5337 - APDP Image Loaded, Delta - (0 Bytes)
- B - 610640 - usb: UFS Serial - e44b9f99
- B - 615002 - usb: fedl, vbus_low
- B - 618631 - Image Load, Start
- D - 55297 - QSEE Image Loaded, Delta - (1640572 Bytes)
- B - 673928 - Image Load, Start
- D - 2013 - SEC Image Loaded, Delta - (4096 Bytes)
- B - 681492 - sbl1_efs_handle_cookies, Start
- D - 488 - sbl1_efs_handle_cookies, Delta
- B - 690001 - Image Load, Start
- D - 14305 - QHEE Image Loaded, Delta - (254184 Bytes)
- B - 704336 - Image Load, Start
- D - 14061 - RPM Image Loaded, Delta - (223900 Bytes)
- B - 719220 - Image Load, Start
- D - 3203 - STI Image Loaded, Delta - (0 Bytes)
- B - 725930 - Image Load, Start
- D - 34801 - APPSBL Image Loaded, Delta - (748684 Bytes)
- B - 760822 - SBL1, End
- D - 678106 - SBL1, Delta
- S - Flash Throughput, 96000 KB/s (2958992 Bytes, 30699 us)
- S - DDR Frequency, 1017 MHz
- Android Bootloader - UART_DM Initialized!!!
- [0] BUILD_VERSION=
- [0] BUILD_DATE=15:10:53 - Dec 5 2017
- [0] welcome to lk
- [10] platform_init()
- [10] target_init()
- [10] RPM GLink Init
- [10] Opening RPM Glink Port success
- [10] Opening SSR Glink Port success
- [20] Glink Connection between APPS and RPM established
- [20] Glink Connection between APPS and RPM established
- [40] UFS init success
- [80] Qseecom Init Done in Appsbl
- [80] secure app region addr=0x86600000 size=0x2200000[90] TZ App region notif returned with status:0 addr:86600000 size:35651584
- [90] TZ App log region register returned with status:0 addr:916d4000 size:4096
- [100] Qseecom TZ Init Done in Appsbl
- [120] Loading cmnlib done
- [120] qseecom_start_app: Loading app keymaster for the first time'
- [150] <8>keymaster: "\"KEYMASTER Init \""
- [160] Setting display_panel to none
- [160] Selected panel: none
- Skip panel configuration
- [160] pm8x41_get_is_cold_boot: cold boot
- [170] Unable to locate /bootselect partition
- [170] boot_verifier: Device is in ORANGE boot state.
- [180] Device is unlocked! Skipping verification...
- [180] Loading (boot) image (12877824): start
- [230] Loading (boot) image (12877824): done
- [240] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
- [240] Your device has been unlocked and can't be trusted.
- Wait for 5 seconds before proceeding
- [5250] mdtp: mdtp_img loaded
- [5250] mdtp: is_test_mode: test mode is set to 1
- [5250] mdtp: read_metadata: SUCCESS
- [5280] LK SEC APP Handle: 0x1
- [5280] Return value from recv_data: 14
- [5290] Return value from recv_data: 14
- [5300] Return value from recv_data: 14
- [5310] decompressing kernel image: start
- [5550] decompressing kernel image: done
- [5560] qcom,msm-id entry not found
- [5560] Only one appended non-skales DTB, select it.
- [5570] cmdline: root=/dev/disk/by-partlabel/userdata rw rootwait console=tty0 console=ttyMSM0,115200n8 androidboot.bootdevice=624000.ufshc androidboott
- [5600] Updating device tree: done
- [5600] Return value from recv_data: 14
- [5610] RPM GLINK UnInit
- [5610] Qseecom De-Init Done in Appsbl
- [5610] booting linux @ 0x80080000, ramdisk @ 0x82200000 (4301841), tags/device tree @ 0x82000000
- [5620] Jumping to kernel via monitor
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.11.0-qcomlt-arm64 (abuild@r2-a19) (gcc version 7.2.0 (Debian 7.2.0-18) ) #1 SMP PREEMPT Thu Jan 11 19:22:20 UTC 2018
- [ 0.000000] Boot CPU: AArch64 Processor [511f2112]
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] OF: reserved mem: OVERLAP DETECTED!
- [ 0.000000] adsp@8ea00000 (0x000000008ea00000--0x0000000090400000) overlaps with gpu@8f200000 (0x000000008f200000--0x000000008f300000)
- [ 0.000000] Reserved memory: created DMA memory pool at 0x000000008f200000, size 1 MiB
- [ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
- [ 0.000000] cma: Reserved 128 MiB at 0x00000000d8000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000015ea4ffff]
- [ 0.000000] NUMA: Adding memblock [0x80000000 - 0x857fffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x91800000 - 0xdfffffff] on node 0
- [ 0.000000] NUMA: Adding memblock [0x100000000 - 0x15ea4ffff] on node 0
- [ 0.000000] NUMA: Initmem setup node 0 [mem 0x80000000-0x15ea4ffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x15e9fad00-0x15e9fc7ff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000015ea4ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
- [ 0.000000] node 0: [mem 0x0000000091800000-0x00000000dfffffff]
- [ 0.000000] node 0: [mem 0x0000000100000000-0x000000015ea4ffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000015ea4ffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] percpu: Embedded 23 pages/cpu @ffff8000de99b000 s57240 r8192 d28776 u94208
- [ 0.000000] Detected PIPT I-cache on CPU0
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 720294
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/userdata rw rootwait console=tty0 console=ttyMSM0,115200n8 androidboot.bootdevice=62400
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] software IO TLB [mem 0xd3fff000-0xd7fff000] (64MB) mapped at [ffff800053fff000-ffff800057ffefff]
- [ 0.000000] Memory: 2639676K/2926912K available (11452K kernel code, 1470K rwdata, 5128K rodata, 1088K init, 449K bss, 156164K reserved, 131072K cm)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
- [ 0.000000] .text : 0xffff000008080000 - 0xffff000008bb0000 ( 11456 KB)
- [ 0.000000] .rodata : 0xffff000008bb0000 - 0xffff0000090c0000 ( 5184 KB)
- [ 0.000000] .init : 0xffff0000090c0000 - 0xffff0000091d0000 ( 1088 KB)
- [ 0.000000] .data : 0xffff0000091d0000 - 0xffff00000933fa00 ( 1471 KB)
- [ 0.000000] .bss : 0xffff00000933fa00 - 0xffff0000093b004c ( 450 KB)
- [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
- [ 0.000000] 0xffff7e0000000000 - 0xffff7e00037a9400 ( 55 MB actual)
- [ 0.000000] memory : 0xffff800000000000 - 0xffff8000dea50000 ( 3562 MB)
- [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
- [ 0.000000] GICv2m: range[mem 0x09bd0000-0x09bd0fff], SPI[544:639]
- [ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000187] Console: colour dummy device 80x25
- [ 0.000879] console [tty0] enabled
- [ 0.000935] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.000962] pid_max: default: 32768 minimum: 301
- [ 0.001027] Security Framework initialized
- [ 0.002273] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.003884] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.004438] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.004482] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.019858] ASID allocator initialised with 65536 entries
- [ 0.037855] EFI services will not be available.
- [ 0.051939] smp: Bringing up secondary CPUs ...
- [ 0.084472] Detected PIPT I-cache on CPU1
- [ 0.084497] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
- [ 0.084527] CPU1: Booted secondary processor [511f2112]
- [ 0.119072] Detected PIPT I-cache on CPU2
- [ 0.119883] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
- [ 0.120569] CPU2: Booted secondary processor [511f2052]
- [ 0.154777] Detected PIPT I-cache on CPU3
- [ 0.155603] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
- [ 0.156240] CPU3: Booted secondary processor [511f2052]
- [ 0.158930] smp: Brought up 1 node, 4 CPUs
- [ 0.159043] SMP: Total of 4 processors activated.
- [ 0.159063] CPU features: detected feature: GIC system register CPU interface
- [ 0.159084] CPU features: detected feature: 32-bit EL0 Support
- [ 0.159802] CPU: All CPU(s) started at EL1
- [ 0.161844] devtmpfs: initialized
- [ 0.168318] DMI not present or invalid.
- [ 0.168589] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.168677] futex hash table entries: 1024 (order: 5, 131072 bytes)
- [ 0.170017] pinctrl core: initialized pinctrl subsystem
- [ 0.171192] NET: Registered protocol family 16
- [ 0.180926] cpuidle: using governor menu
- [ 0.181685] vdso: 2 pages (1 code @ ffff000008bb7000, 1 data @ ffff0000091d5000)
- [ 0.181828] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
- [ 0.184305] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.184672] Serial: AMBA PL011 UART driver
- [ 0.207667] irq: no irq domain found for /adsp-smp2p/slave-kernel !
- [ 0.229415] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.245605] ACPI: Interpreter disabled.
- [ 0.246504] vgaarb: loaded
- [ 0.246694] SCSI subsystem initialized
- [ 0.247608] usbcore: registered new interface driver usbfs
- [ 0.247653] usbcore: registered new interface driver hub
- [ 0.247722] usbcore: registered new device driver usb
- [ 0.248072] media: Linux media interface: v0.10
- [ 0.248105] Linux video capture interface: v2.00
- [ 0.248150] pps_core: LinuxPPS API ver. 1 registered
- [ 0.248163] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.248198] PTP clock support registered
- [ 0.248270] dmi: Firmware registration failed.
- [ 0.253523] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.259514] clocksource: Switched to clocksource arch_sys_counter
- [ 0.259690] VFS: Disk quotas dquot_6.6.0
- [ 0.259744] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.259972] pnp: PnP ACPI: disabled
- [ 0.266880] NET: Registered protocol family 2
- [ 0.267451] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.267766] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.267911] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.268062] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.268133] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.268280] NET: Registered protocol family 1
- [ 0.270690] s1: supplied by VPH
- [ 0.270932] s2: supplied by VPH
- [ 0.271133] s3: supplied by VPH
- [ 0.271186] s3: Bringing 0uV into 1300000-1300000uV
- [ 0.271943] s4: supplied by VPH
- [ 0.271991] s4: Bringing 0uV into 1800000-1800000uV
- [ 0.272390] s5: supplied by VPH
- [ 0.272435] s5: Bringing 0uV into 2150000-2150000uV
- [ 0.272575] RPC: Registered named UNIX socket transport module.
- [ 0.272591] RPC: Registered udp transport module.
- [ 0.272604] RPC: Registered tcp transport module.
- [ 0.272616] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.272718] s6: supplied by VPH
- [ 0.272789] Unpacking initramfs...
- [ 0.272908] s7: supplied by VPH
- [ 0.272943] s7: Bringing 0uV into 800000-800000uV
- [ 0.273223] s8: supplied by VPH
- [ 0.273394] s9: supplied by VPH
- [ 0.273578] s10: supplied by VPH
- [ 0.273769] s11: supplied by VPH
- [ 0.273944] s12: supplied by VPH
- [ 0.274122] l1: supplied by s1
- [ 0.274160] l1: Bringing 0uV into 1000000-1000000uV
- [ 0.274448] l2: supplied by s3
- [ 0.274488] l2: Bringing 0uV into 1250000-1250000uV
- [ 0.274703] l3: supplied by s8
- [ 0.274753] l3: Bringing 0uV into 850000-850000uV
- [ 0.275033] l4: supplied by s3
- [ 0.275072] l4: Bringing 0uV into 1225000-1225000uV
- [ 0.275382] l5: supplied by s5
- [ 0.275539] l6: supplied by s5
- [ 0.275578] l6: Bringing 0uV into 1200000-1200000uV
- [ 0.275872] l7: supplied by s5
- [ 0.276084] l8: supplied by VPH
- [ 0.276129] l8: Bringing 0uV into 1800000-1800000uV
- [ 0.276414] l9: supplied by VPH
- [ 0.276456] l9: Bringing 0uV into 1800000-1800000uV
- [ 0.276803] l10: supplied by VPH
- [ 0.276851] l10: Bringing 0uV into 1800000-1800000uV
- [ 0.277146] l11: supplied by s8
- [ 0.277186] l11: Bringing 0uV into 1150000-1150000uV
- [ 0.277477] l12: supplied by s5
- [ 0.277518] l12: Bringing 0uV into 1800000-1800000uV
- [ 0.277822] l13: supplied by VPH
- [ 0.277867] l13: Bringing 0uV into 1800000-1800000uV
- [ 0.278236] l14: supplied by VPH
- [ 0.278276] l14: Bringing 0uV into 1800000-1800000uV
- [ 0.278600] l15: supplied by VPH
- [ 0.278643] l15: Bringing 0uV into 1800000-1800000uV
- [ 0.279165] l16: supplied by VPH
- [ 0.279205] l16: Bringing 0uV into 2700000-2700000uV
- [ 0.280061] l17: Bringing 0uV into 2500000-2500000uV
- [ 0.280556] l18: supplied by VPH
- [ 0.280607] l18: Bringing 0uV into 2700000-2700000uV
- [ 0.281104] l19: supplied by VPH
- [ 0.281149] l19: Bringing 0uV into 3000000-3000000uV
- [ 0.281716] l20: supplied by VPH
- [ 0.281769] l20: Bringing 0uV into 2950000-2950000uV
- [ 0.282306] l21: supplied by VPH
- [ 0.282357] l21: Bringing 0uV into 2950000-2950000uV
- [ 0.282862] l22: supplied by VPH
- [ 0.282917] l22: Bringing 0uV into 3300000-3300000uV
- [ 0.283556] l23: supplied by VPH
- [ 0.283608] l23: Bringing 0uV into 2800000-2800000uV
- [ 0.284133] l24: supplied by VPH
- [ 0.284180] l24: Bringing 0uV into 3075000-3075000uV
- [ 0.284723] l25: supplied by s3
- [ 0.284774] l25: Bringing 0uV into 1200000-1200000uV
- [ 0.285283] l26: supplied by s3
- [ 0.285710] l27: supplied by s3
- [ 0.285756] l27: Bringing 0uV into 1000000-1000000uV
- [ 0.286232] l28: supplied by s3
- [ 0.286275] l28: Bringing 0uV into 925000-925000uV
- [ 0.286707] l29: Bringing 0uV into 2800000-2800000uV
- [ 0.287346] l30: supplied by VPH
- [ 0.287396] l30: Bringing 0uV into 1800000-1800000uV
- [ 0.287909] l31: supplied by s3
- [ 0.288278] l32: supplied by s5
- [ 0.288329] l32: Bringing 0uV into 1800000-1800000uV
- [ 0.413127] Freeing initrd memory: 4200K
- [ 0.417156] kvm [1]: HYP mode not available
- [ 0.422041] audit: initializing netlink subsys (disabled)
- [ 0.423395] audit: type=2000 audit(0.419:1): state=initialized audit_enabled=0 res=1
- [ 0.423700] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 0.433381] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.434449] NFS: Registering the id_resolver key type
- [ 0.434484] Key type id_resolver registered
- [ 0.434497] Key type id_legacy registered
- [ 0.434518] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.434771] 9p: Installing v9fs 9p2000 file system support
- [ 0.438092] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.442246] io scheduler noop registered
- [ 0.442388] io scheduler cfq registered (default)
- [ 0.442403] io scheduler mq-deadline registered
- [ 0.447768] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
- [ 0.448617] qcom-qmp-phy 34000.pciephy: Registered Qcom-QMP phy
- [ 0.449371] ufs_qcom_phy_qmp_14nm 627000.ufsphy: invalid resource
- [ 0.453225] qcom-pcie 600000.qcom,pcie: could not find pctldev for node /soc/qcom,spmi@400f000/pmic@0/gpios@c000/wlan_gpios, deferring probe
- [ 0.455294] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00608000 ranges:
- [ 0.455569] OF: PCI: IO 0x0d200000..0x0d2fffff -> 0x0d200000
- [ 0.455591] OF: PCI: MEM 0x0d300000..0x0dffffff -> 0x0d300000
- [ 0.458946] qcom-pcie 608000.qcom,pcie: 608000.qcom,pcie supply vdd-wlan-io not found, using dummy regulator
- [ 1.460760] qcom-pcie 608000.qcom,pcie: phy link never came up
- [ 1.462786] qcom-pcie 608000.qcom,pcie: cannot initialize host
- [ 1.462925] qcom-pcie: probe of 608000.qcom,pcie failed with error -110
- [ 1.463767] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00610000 ranges:
- [ 1.463805] OF: PCI: IO 0x0e200000..0x0e2fffff -> 0x0e200000
- [ 1.463827] OF: PCI: MEM 0x0e300000..0x0fffffff -> 0x0e300000
- [ 1.467174] qcom-pcie 610000.qcom,pcie: 610000.qcom,pcie supply vdd-wlan-io not found, using dummy regulator
- [ 1.568812] qcom-pcie 610000.qcom,pcie: link up
- [ 1.568967] qcom-pcie 610000.qcom,pcie: PCI host bridge to bus 0002:00
- [ 1.568987] pci_bus 0002:00: root bus resource [bus 00-ff]
- [ 1.569003] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xe200000-0xe2fffff])
- [ 1.569024] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff]
- [ 1.583564] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff]
- [ 1.583588] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff 64bit]
- [ 1.583618] pci 0002:00:00.0: BAR 13: assigned [io 0x100000-0x100fff]
- [ 1.583638] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit]
- [ 1.583832] pci 0002:01:00.0: BAR 2: assigned [io 0x100000-0x10007f]
- [ 1.583900] pci 0002:00:00.0: PCI bridge to [bus 01]
- [ 1.583916] pci 0002:00:00.0: bridge window [io 0x100000-0x100fff]
- [ 1.583935] pci 0002:00:00.0: bridge window [mem 0x0e300000-0x0e3fffff]
- [ 1.584242] pcieport 0002:00:00.0: Signaling PME with IRQ 269
- [ 1.584361] pcieport 0002:00:00.0: AER enabled with IRQ 269
- [ 1.584447] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
- [ 1.608549] xenfs: not registering filesystem on non-xen platform
- [ 1.619452] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.624211] SuperH (H)SCI(F) driver initialized
- [ 1.625713] msm_serial 7570000.serial: msm_serial: detected port #1
- [ 1.625871] msm_serial 7570000.serial: uartclk = 19200000
- [ 1.626020] 7570000.serial: ttyMSM1 at MMIO 0x7570000 (irq = 8, base_baud = 1200000) is a MSM
- [ 1.628133] msm_serial 75b0000.serial: msm_serial: detected port #0
- [ 1.628289] msm_serial 75b0000.serial: uartclk = 7372800
- [ 1.628427] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 11, base_baud = 460800) is a MSM
- [ 1.628803] msm_serial: console setup on port #0
- [ 3.057541] console [ttyMSM0] enabled
- [ 3.062992] msm_serial: driver initialized
- [ 3.068310] arm-smmu d00000.arm,smmu: probing hardware configuration...
- [ 3.069746] arm-smmu d00000.arm,smmu: SMMUv2 with:
- [ 3.076339] arm-smmu d00000.arm,smmu: stage 1 translation
- [ 3.081169] arm-smmu d00000.arm,smmu: address translation ops
- [ 3.086615] arm-smmu d00000.arm,smmu: non-coherent table walk
- [ 3.092446] arm-smmu d00000.arm,smmu: (IDR0.CTTW overridden by FW configuration)
- [ 3.098272] arm-smmu d00000.arm,smmu: stream matching with 2 register groups
- [ 3.105860] arm-smmu d00000.arm,smmu: 2 context banks (0 stage-2 only)
- [ 3.112958] arm-smmu d00000.arm,smmu: Supported page sizes: 0x63315000
- [ 3.119369] arm-smmu d00000.arm,smmu: Stage-1: 32-bit VA -> 36-bit IPA
- [ 3.127910] arm-smmu 1600000.arm,smmu-lpass_q6: probing hardware configuration...
- [ 3.132578] arm-smmu 1600000.arm,smmu-lpass_q6: SMMUv2 with:
- [ 3.140254] arm-smmu 1600000.arm,smmu-lpass_q6: stage 1 translation
- [ 3.145915] arm-smmu 1600000.arm,smmu-lpass_q6: address translation ops
- [ 3.152297] arm-smmu 1600000.arm,smmu-lpass_q6: non-coherent table walk
- [ 3.158933] arm-smmu 1600000.arm,smmu-lpass_q6: (IDR0.CTTW overridden by FW configuration)
- [ 3.165673] arm-smmu 1600000.arm,smmu-lpass_q6: stream matching with 15 register groups
- [ 3.173749] arm-smmu 1600000.arm,smmu-lpass_q6: 12 context banks (0 stage-2 only)
- [ 3.182083] arm-smmu 1600000.arm,smmu-lpass_q6: Supported page sizes: 0x63315000
- [ 3.189421] arm-smmu 1600000.arm,smmu-lpass_q6: Stage-1: 36-bit VA -> 36-bit IPA
- [ 3.199519] arm-smmu d40000.arm,smmu-venus: probing hardware configuration...
- [ 3.204434] arm-smmu d40000.arm,smmu-venus: SMMUv2 with:
- [ 3.211615] arm-smmu d40000.arm,smmu-venus: stage 1 translation
- [ 3.216920] arm-smmu d40000.arm,smmu-venus: address translation ops
- [ 3.222924] arm-smmu d40000.arm,smmu-venus: non-coherent table walk
- [ 3.229244] arm-smmu d40000.arm,smmu-venus: (IDR0.CTTW overridden by FW configuration)
- [ 3.235615] arm-smmu d40000.arm,smmu-venus: stream matching with 42 register groups
- [ 3.243400] arm-smmu d40000.arm,smmu-venus: 7 context banks (0 stage-2 only)
- [ 3.251430] arm-smmu d40000.arm,smmu-venus: Supported page sizes: 0x63315000
- [ 3.258340] arm-smmu d40000.arm,smmu-venus: Stage-1: 32-bit VA -> 36-bit IPA
- [ 3.275503] irq: no irq domain found for /soc/mdss@900000 !
- [ 3.277037] iommu: Adding device 901000.mdp to group 0
- [ 3.280181] msm_mdp 901000.mdp: Linked as a consumer to d00000.arm,smmu
- [ 3.285920] irq: no irq domain found for /soc/mdss@900000 !
- [ 3.341027] loop: module loaded
- [ 3.343574] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 3.348116] scsi host0: ufshcd
- [ 3.370619] hisi_sas: driver version v1.6
- [ 3.376887] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 3.378846] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 3.383598] spi_qup 75ba000.spi: cannot set RESET state
- [ 3.387808] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 3.395249] spi_qup: probe of 75ba000.spi failed with error -5
- [ 3.408577] spmi spmi-0: PMIC Arb Version-2 (0x20010000)
- [ 3.427792] s2: Bringing 1270000uV into 1015000-1015000uV
- [ 3.432003] libphy: Fixed MDIO Bus: probed
- [ 3.432886] tun: Universal TUN/TAP device driver, 1.6
- [ 3.438468] atl1c 0002:01:00.0: enabling device (0000 -> 0002)
- [ 3.466221] random: fast init done
- [ 3.467740] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
- [ 3.468892] ufshcd_get_max_icc_level: Couldn't find valid icc_level = 0
- [ 3.470178] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 3.491471] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 3.499505] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 3.505239] atl1c 0002:01:00.0: version 1.0.1.1-NAPI
- [ 3.514578] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 3.517314] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 3.523200] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 3.528765] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 3.530836] ufshcd-qcom 624000.ufshc: dev_pm_opp_get_opp_count: OPP table not found (-19)
- [ 3.541533] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 3.549639] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 3.550628] scsi 0:0:0:0: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 3.563364] sky2: driver version 1.30
- [ 3.573460] VFIO - User Level meta-driver version: 0.3
- [ 3.579824] sd 0:0:0:0: [sda] 6720512 4096-byte logical blocks: (27.5 GB/25.6 GiB)
- [ 3.580340] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.581806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.581850] ehci-pci: EHCI PCI platform driver
- [ 3.581940] ehci-platform: EHCI generic platform driver
- [ 3.582288] ehci-exynos: EHCI EXYNOS driver
- [ 3.582647] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 3.582893] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.582920] ohci-pci: OHCI PCI platform driver
- [ 3.583042] ohci-platform: OHCI generic platform driver
- [ 3.583381] ohci-exynos: OHCI EXYNOS driver
- [ 3.584548] usbcore: registered new interface driver usb-storage
- [ 3.584755] usbcore: registered new interface driver usbserial
- [ 3.584820] usbcore: registered new interface driver usbserial_generic
- [ 3.584879] usbserial: USB Serial support registered for generic
- [ 3.589758] i2c /dev entries driver
- [ 3.591632] i2c_qup 75b5000.i2c: using default clock-frequency 100000
- [ 3.591654] i2c_qup 75b5000.i2c:
- [ 3.591654] tx channel not available
- [ 3.593649] i2c_qup 75b6000.i2c: using default clock-frequency 100000
- [ 3.593669] i2c_qup 75b6000.i2c:
- [ 3.593669] tx channel not available
- [ 3.595028] i2c_qup 7577000.i2c: using default clock-frequency 100000
- [ 3.595047] i2c_qup 7577000.i2c:
- [ 3.595047] tx channel not available
- [ 3.606848] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 326400 KHz
- [ 3.606993] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 422400 KHz
- [ 3.608922] cpufreq: cpufreq_online: CPU2: Running at unlisted freq: 19200 KHz
- [ 3.608991] cpufreq: cpufreq_online: CPU2: Unlisted initial frequency changed to: 307200 KHz
- [ 3.609486] sdhci: Secure Digital Host Controller Interface driver
- [ 3.609488] sdhci: Copyright(c) Pierre Ossman
- [ 3.609653] Synopsys Designware Multimedia Card Interface Driver
- [ 3.610053] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.610764] sdhci_msm 74a4900.sdhci: Got CD GPIO
- [ 3.675444] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
- [ 3.764567] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.772225] scsi 0:0:0:1: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 3.772313] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.772958] usbcore: registered new interface driver usbhid
- [ 3.772960] usbhid: USB HID core driver
- [ 3.773808] qcom_adsp_pil adsp-pil: adsp-pil supply px not found, using dummy regulator
- [ 3.774343] remoteproc remoteproc0: adsp-pil is available
- [ 3.774438] remoteproc remoteproc0: Direct firmware load for adsp.mdt failed with error -2
- [ 3.774443] remoteproc remoteproc0: powering up adsp-pil
- [ 3.774472] remoteproc remoteproc0: Direct firmware load for adsp.mdt failed with error -2
- [ 3.774476] remoteproc remoteproc0: request_firmware failed: -2
- [ 3.776092] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
- [ 3.776160] usbcore: registered new interface driver snd-usb-audio
- [ 3.778379] NET: Registered protocol family 10
- [ 3.779027] Segment Routing with IPv6
- [ 3.779056] NET: Registered protocol family 17
- [ 3.779101] 9pnet: Installing 9P2000 support
- [ 3.779144] Key type dns_resolver registered
- [ 3.779207] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.786202] Registered cp15_barrier emulation handler
- [ 3.794559] Registered setend emulation handler
- [ 3.794948] registered taskstats version 1
- [ 3.806085] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
- [ 3.806959] OF: PCI: host bridge /soc/agnoc@0/qcom,pcie@00600000 ranges:
- [ 3.806977] OF: PCI: IO 0x0c200000..0x0c2fffff -> 0x0c200000
- [ 3.806986] OF: PCI: MEM 0x0c300000..0x0cffffff -> 0x0c300000
- [ 3.918938] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.919076] scsi 0:0:0:2: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 3.928227] sd 0:0:0:1: [sdb] Write Protect is off
- [ 3.936789] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.940917] scsi 0:0:0:3: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 3.946559] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 3.947925] sd 0:0:0:2: [sdc] Write Protect is off
- [ 3.950567] sdb: sdb1
- [ 3.950659] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 3.953182] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 3.961791] sdc: sdc1
- [ 3.964254] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 3.979317] qcom-pcie 600000.qcom,pcie: link up
- [ 3.979455] qcom-pcie 600000.qcom,pcie: PCI host bridge to bus 0000:00
- [ 3.979462] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 3.979467] pci_bus 0000:00: root bus resource [io 0x200000-0x2fffff] (bus address [0xc200000-0xc2fffff])
- [ 3.979470] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
- [ 3.995531] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff]
- [ 3.995536] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
- [ 3.995549] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
- [ 3.995647] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.995653] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
- [ 3.995932] pcieport 0000:00:00.0: Signaling PME with IRQ 337
- [ 3.996036] pcieport 0000:00:00.0: AER enabled with IRQ 337
- [ 3.996811] arm-smmu b40000.arm,smmu: probing hardware configuration...
- [ 3.996815] arm-smmu b40000.arm,smmu: SMMUv2 with:
- [ 3.996852] arm-smmu b40000.arm,smmu: stage 1 translation
- [ 3.996855] arm-smmu b40000.arm,smmu: address translation ops
- [ 3.996857] arm-smmu b40000.arm,smmu: non-coherent table walk
- [ 3.996859] arm-smmu b40000.arm,smmu: (IDR0.CTTW overridden by FW configuration)
- [ 3.996863] arm-smmu b40000.arm,smmu: stream matching with 2 register groups
- [ 3.996886] arm-smmu b40000.arm,smmu: 2 context banks (0 stage-2 only)
- [ 3.996909] arm-smmu b40000.arm,smmu: Supported page sizes: 0x63315000
- [ 3.996912] arm-smmu b40000.arm,smmu: Stage-1: 48-bit VA -> 36-bit IPA
- [ 3.998145] iommu: Adding device b00000.gpu to group 1
- [ 3.998351] adreno b00000.gpu: Linked as a consumer to b40000.arm,smmu
- [ 3.998643] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy regulator
- [ 3.999580] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops)
- [ 4.000109] hdmi_msm 9a0000.hdmi-tx: failed to init hdcp: disabled
- [ 4.000498] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops)
- [ 4.000517] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops)
- [ 4.140113] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 4.140117] [drm] Driver supports precise vblank timestamp query.
- [ 4.141745] [drm] Initialized msm 1.2.0 20130625 for 900000.mdss on minor 0
- [ 4.192751] scsi 0:0:0:4: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 4.195151] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
- [ 4.203677] sd 0:0:0:3: [sdd] Write Protect is off
- [ 4.204176] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 4.205895] scsi 0:0:0:5: Direct-Access TOSHIBA THGBF7G8K4LBATRB 0300 PQ: 0 ANSI: 6
- [ 4.209202] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
- [ 4.209461] sd 0:0:0:5: [sdf] Write Protect is off
- [ 4.209864] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 4.210080] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
- [ 4.210425] sd 0:0:0:4: [sde] Write Protect is off
- [ 4.211062] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 4.215270] sdd: sdd1 sdd2 sdd3
- [ 4.216122] sdf: sdf1 sdf2 sdf3
- [ 4.220324] sd 0:0:0:5: [sdf] Attached SCSI disk
- [ 4.220769] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 4.221867] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 2
- [ 4.245293] sd 0:0:0:4: [sde] Attached SCSI disk
- [ 4.261333] Console: switching to colour frame buffer device 240x67
- [ 4.410880] msm 900000.mdss: fb0: msm frame buffer device
- [ 4.420235] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.422344] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
- [ 4.428064] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x02010010
- [ 4.435374] xhci-hcd xhci-hcd.1.auto: irq 300, io mem 0x06a00000
- [ 4.444453] hub 1-0:1.0: USB hub found
- [ 4.450196] hub 1-0:1.0: 1 port detected
- [ 4.453873] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.457841] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
- [ 4.463214] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.471124] hub 2-0:1.0: USB hub found
- [ 4.478999] hub 2-0:1.0: 1 port detected
- [ 4.483446] input: gpio_keys as /devices/platform/gpio_keys/input/input0
- [ 4.487013] hctosys: unable to open rtc device (rtc0)
- [ 4.494251] ALSA devic[ 4.501564] Freeing unused kernel memory: 1088K
- Loading, please wait...
- starting version 236
- [ 4.783396] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 4.912534] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0
- [ 4.943629] hub 1-1:1.0: USB hub found
- [ 4.944405] hub 1-1:1.0: 4 ports detected
- [ 5.047456] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
- [ 5.071600] hub 2-1:1.0: USB hub found
- [ 5.071900] hub 2-1:1.0: 4 ports detected
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... [ 5.287364] raid6: int64x1 gen() 1246 MB/s
- [ 5.295340] usb 1-1.1: new low-speed USB device number 3 using xhci-hcd
- [ 5.355316] raid6: int64x1 xor() 842 MB/s
- [ 5.427339] raid6: int64x2 gen() 1689 MB/s
- [ 5.499343] raid6: int64x2 xor() 1165 MB/s
- [ 5.522902] input: PixArt USB Optical Mouse as /devices/platform/soc/soc:usb@6a00000/6a00000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:0461
- [ 5.536101] hid-generic 0003:0461:4E22.0001: input: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-xhci-hcd.1.auto-1.1/input0
- [ 5.571321] raid6: int64x4 gen() 3232 MB/s
- [ 5.643329] raid6: int64x4 xor() 1895 MB/s
- [ 5.683355] usb 1-1.2: new low-speed USB device number 4 using xhci-hcd
- [ 5.715317] raid6: int64x8 gen() 3223 MB/s
- [ 5.787312] raid6: int64x8 xor() 2127 MB/s
- [ 5.859341] raid6: neonx1 gen() 3251 MB/s
- [ 5.878163] input: Logitech USB Keyboard as /devices/platform/soc/soc:usb@6a00000/6a00000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C2
- [ 5.931313] raid6: neonx1 xor() 2156 MB/s
- [ 5.953013] hid-generic 0003:046D:C31C.0002: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-xhci-hcd.1.auto-1.2/input0
- [ 5.974843] input: Logitech USB Keyboard as /devices/platform/soc/soc:usb@6a00000/6a00000.dwc3/xhci-hcd.1.auto/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C3
- [ 6.003312] raid6: neonx2 gen() 4155 MB/s
- [ 6.047667] hid-generic 0003:046D:C31C.0003: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-xhci-hcd.1.auto-1.2/input1
- [ 6.075349] raid6: neonx2 xor() 2858 MB/s
- [ 6.151341] raid6: neonx4 gen() 4893 MB/s
- [ 6.227336] raid6: neonx4 xor() 1008 MB/s
- [ 6.303374] raid6: neonx8 gen() 1355 MB/s
- [ 6.379309] raid6: neonx8 xor() 1568 MB/s
- [ 6.387602] raid6: using algorithm neonx4 gen() 4893 MB/s
- [ 6.395856] raid6: .... xor() 1008 MB/s, rmw enabled
- [ 6.404040] raid6: using intx1 recovery algorithm
- [ 6.413269] xor: measuring software checksum speed
- [ 6.459323] 8regs : 3926.000 MB/sec
- [ 6.503328] 8regs_prefetch: 3645.000 MB/sec
- [ 6.547307] 32regs : 4912.000 MB/sec
- [ 6.591307] 32regs_prefetch: 4403.000 MB/sec
- [ 6.598795] xor: using function: 32regs (4912.000 MB/sec)
- [ 6.616685] Btrfs loaded, crc32c=crc32c-generic
- Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.30.2
- fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/sda9
- fsck exited with status code 8
- done.
- Warning: File system check failed but did not detect errors
- [ 12.141858] EXT4-fs (sda9): recovery complete
- [ 12.149656] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 12.309498] systemd[1]: System time before build time, advancing clock.
- [ 12.336386] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 12.349274] cgroup: cgroup2: unknown option "nsdelegate"
- Welcome to Debian GNU/Linux buster/sid!
- File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup b.
- Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Swap.
- [ OK ] Created slice System Slice.
- Mounting POSIX Message Queue File System...
- [ OK ] Reached target Slices.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- Mounting Huge Pages File System...
- Mounting K[ 12.667767] EXT4-fs (sda9): re-mounted. Opts: data=ordered
- ernel Debug File System...
- [ OK ] Listening on Journal Socket.
- Starting Load Kernel Modules...
- Starting Nameserver information manager...
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on Syslog Socket.
- Starting Set the console keyboard layout...
- [ OK ] Reached target Paths.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on fsck to fsckd communication Socket.
- Starting Remount Root and Kernel File Systems...
- [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point.
- [ OK ] Listening on udev Control Socket.
- Starting udev Coldplug all Devices...
- [ OK ] Listening on Journal Audit Socket.
- Starting Journal Service...
- [ OK ] Created slice system-serial\x2dgetty.slice.
- Starting Create list of required st…ce nodes for the current kernel...
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Create list of required sta…vice nodes for the current kernel.
- Starting Create Static Device Nodes in /dev...
- Starting Load/Save Random Seed...
- Starting Apply Kernel Variables...
- Mounting Kernel Configuration File System...
- [ OK ] Started Nameserver information manager.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Raise network interfaces...
- Starting Set console font and keymap...
- [ OK ] Started Journal Service.
- [ OK ] Started Set console font and keymap.
- [ OK ] Started udev Coldplug all Devices.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started udev Kernel Device Manager.
- [ 12.975658] systemd-journald[1671]: Received request to flush runtime journal from PID 1
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Time Synchronization...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Raise network interfaces.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Found device /dev/ttyMSM0.
- [ OK ] Stopped Network Time Synchronization.
- Starting Network Time Synchronization...
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ 13.492369] iommu: Adding device c00000.video-codec to group 2
- [ 13.505488] qcom-venus c00000.video-codec: Linked as a consumer to d40000.arm,smmu-venus
- [ 13.522050] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 13.532153] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 13.848058] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 0000:0000
- [ 13.848065] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
- [ 13.848816] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.2.0-00180-QCARMSWPZ-1 api 4 features wowlan,ignore-otp,no-4addr-pad crc32 75dee6c5
- [ OK ] Stopped Network Time Synchronization.
- Starting Network Time Synchronization...
- [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
- [ 13.922301] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,vendor=168c,device=003e,subsystem-vendor=0000,subsystem-device=0000 fron
- [ 13.930886] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 ed5f849a
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- Starting Network Time Synchronization...
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- Starting Network Time Synchronization...
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Stopped Network Time Synchronization.
- [FAILED] Failed to start Network Time Synchronization.
- See 'systemctl status systemd-timesyncd.service' for details.
- [ OK ] Reached target System Initialization.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Listening on GPS (Global Positioning System) Daemon Sockets.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting Initialize hardware monitoring sensors...
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- Starting Restore /etc/resolv.conf i…fore the ppp link was shut down...
- Starting Login Service...
- [ OK ] Started Regular background program processing daemon.
- [ OK ] Started D-Bus System Message Bus.
- Starting Network Manager...
- Starting WPA supplicant...
- Starting Disk Manager...
- Starting System Logging Service...
- Starting Modem Manager...
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Trigger anacron every hour.
- [ OK ] Started Run anacron jobs.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Reached target Timers.
- [ OK ] Started System Logging Service.
- [ OK ] Started Restore /etc/resolv.conf if…before the ppp link was shut down.
- [ OK ] Started Initialize hardware monitoring sensors.
- [ OK ] Started WPA supplicant.
- [ OK ] Started Login Service.
- Starting Hostname Service...
- Starting Authorization Manager...
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- [ OK ] Started Authorization Manager.
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Started Modem Manager.
- [ OK ] Started Hostname Service.
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- [ OK ] Started Network Manager.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Reached target Network.
- Starting OpenBSD Secure Shell server...
- Starting Permit User Sessions...
- Starting /etc/rc.local Compatibility...
- [ OK ] Started Permit User Sessions.
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ 15.540570] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
- [ 15.551134] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<1000 Mbps Full Duplex>
- [ OK ] Started Disk Manager.
- [ OK ] Started Serial Getty on ttyMSM0.
- Starting Simple Desktop Display Manager...
- [ OK ] Started Getty on tty1.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Started Simple Desktop Display Manager.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux buster/sid linaro-alip ttyMSM0
- linaro-alip login: root (automatic login)
- Last login: Thu Dec 14 22:10:00 UTC 2017 on ttyMSM0
- Linux linaro-alip 4.11.0-qcomlt-arm64 #1 SMP PREEMPT Thu Jan 11 19:22:20 UTC 2018 aarch64
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- [ 15.925545] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy regulator
- [ 15.925803] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummy regulator
- [ 15.934017] msm 900000.mdss: A530: using IOMMU
- [ 15.943356] adreno b00000.gpu: dev_pm_opp_find_freq_exact: OPP table not found (-19)
- [ 15.945126] adreno_zap_shader: assigned reserved memory node gpu@8f200000
- [ 16.111916] ath10k_pci 0000:01:00.0: htt-ver 3.26 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- root@linaro-alip:~# [ 16.214326] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
- [ 16.260403] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ 18.584700] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ 18.681407] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- S - QC_IMAGE_VERSION_STRING=BOOT.XF.1.0-00301
Add Comment
Please, Sign In to add comment