API tools faq
paste
nospamdan

Slim6 no-boot last_kmsg 2

nospamdan
Nov 16th, 2015
148
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Visual Pro Log 260.46 KB | None | 0 0
raw download clone embed print report
  1.  s)
  2. <6>[    0.409851] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  3. <6>[    0.410369] NET: Registered protocol family 1
  4. <6>[    0.410736] RPC: Registered named UNIX socket transport module.
  5. <6>[    0.410888] RPC: Registered udp transport module.
  6. <6>[    0.410980] RPC: Registered tcp transport module.
  7. <6>[    0.411102] RPC: Registered tcp NFSv4.1 backchannel transport module.
  8. <6>[    0.411407] Trying to unpack rootfs image as initramfs...
  9. <6>[    0.451477] Freeing initrd memory: 948K
  10. <6>[    0.451751] PMU: registered new PMU device of type 0
  11. <6>[    0.452026] PMU: registered new PMU device of type 1
  12. <6>[    0.452514] ETM/ETB intialized.
  13. <6>[    0.452697] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  14. <6>[    0.453124] pil_modem pil_modem: using secure boot
  15. <6>[    0.453308] sdio_al:SDIO-AL SW version 1.30
  16. <3>[    0.455474] smd_channel_probe_worker: allocation table not initialized
  17. <6>[    0.459838] msm_dsps drivep version 3.03.
  18. <6>[    0.462463] lpa_if_init: lpa_if_ptr 0xde9d8e00   buf_vir 0xffdf0000   buf_phy 0x5e580000  buf_zise 65536
  19. <3>[    0.464416] sec_switch_probe enter sec_switch_probe
  20. <5>[    0.466400] msm_rpm_log_probe: OK
  21. <3>[    0.466552] [BT] bcm4330_bluetooth_init
  22. <3>[    0.466949] [BT] bcm4330_bluetooth_probe
  23. <3>[    0.467285] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  24. <3>[    0.467376] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  25. <6>[    0.475708] sec_log_save_old: saved old log at 43449@de190000
  26. <6>[    0.479949] sec_getlog_supply_kloginfo: 0xc112a518
  27. <6>[    0.480194] audit: initializing netlink socket (disabled)
  28. <5>[    0.480377] type=2000 audit(0.450:1): initialized
  29. <4>[    0.565368] highmem bounce pool size: 64 pages
  30. <6>[    0.565612] ashmem: initialized
  31. <6>[    0.571563] exFAT: Core Version 1.2.4
  32. <6>[    0.571655] exFAT: FS Version 1.2.4
  33. <6>[    0.573516] NTFS driver 2.1.30 [Flags: R/W].
  34. <6>[    0.573944] fuse init (API version 7.16)
  35. <6>[    0.574615] msgmni has been set to 749
  36. <7>[    0.574737] SELinux:  Registering netfilter hooks
  37. <6>[    0.576660] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  38. <6>[    0.576782] io scheduler noop registered
  39. <6>[    0.576934] io scheduler deadline registered (default)
  40. <6>[    0.577056] io scheduler row registered
  41. <6>[    0.577270] io scheduler cfq registered
  42. <4>[    0.579559] mdp4_csc_config: Block type 10 isn't supported by CSC.
  43. <4>[    0.579681] mdp4_csc_config: Block type 8 isn't supported by CSC.
  44. <4>[    0.583557] ld9040 start lcdc_ld9040_panel_init
  45. <4>[    0.583740] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  46. <4>[    0.583892] ld9040 msm_fb_add_device START
  47. <6>[    0.583984] setting pdata->panel_info.fb_num to 3. type: 0
  48. <3>[    0.584167] msm_fb_add_device: msm_fb_device_alloc failed!
  49. <4>[    0.584259] ld9040 msm_fb_add_device end
  50. <4>[    0.584716] ld9040 platform_driver_register(&this_driver) is done
  51. <4>[    0.584838] ld9040 LDI : EA8868, pixelclock 27400000
  52. <6>[    0.585205] setting pdata->panel_info.fb_num to 3. type: 3
  53. <6>[    0.588043] mdp4_lcdc_vsync_init: ndx=0
  54. <6>[    0.590332] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  55. <6>[    0.590515] is_lpcharging_state: is_lpm_boot:1
  56. <6>[    0.590637] [lpm-mode] skip init logo!
  57. <7>[    0.591125] Registered led device: lcd-backlight
  58. <6>[    0.591247] mdp4_lcdc_vsync_init: ndx=0
  59. <6>[    0.591430] sec_getlog_supply_fbinfo: 0x420f0000 480 800 32 2
  60. <4>[    0.591552] ld9040 platform_device_register(&this_device) is done
  61. <6>[    0.592163] hdmi_msm hdmi_msm.0: probe
  62. <6>[    0.592590] hdmi_msm hdmi_msm.1: probe
  63. <6>[    0.592712] hdmi_msm hdmi_msm.1: Features <vad:0x80004481, HDMI:ON, HDCP:ON>
  64. <6>[    0.592987] setting pdata->panel_info.fb_num to 1. type: 7
  65. <6>[    0.593811] mdp4_dtv_vsync_init: ndx=0
  66. <6>[    0.595916] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  67. <6>[    0.596313] mdp4_dtv_vsync_init: ndx=0
  68. <6>[    0.596588] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group debb1608
  69. <6>[    0.596710] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  70. <6>[    0.596893] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  71. <7>[    0.597229] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  72. <6>[    0.598236]
  73. <6>[    0.598266]  msm_vidc_enc: Inside vid_enc_init()
  74. <6>[    0.598724]
  75. <6>[    0.598724]  msm_vidc_enc: Inside vid_enc_vcd_init()
  76. <6>[    0.598999] is_lpcharging_state: is_lpm_boot:1
  77. <6>[    0.599212] sii9234_init : LPM Charging Mode! return 0
  78. <6>[    0.599700] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  79. <6>[    0.600097] msm_serial_hs module loaded
  80. <6>[    0.600280] msm_serial_hsl: detected port #1
  81. <6>[    0.600524] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  82. <6>[    0.600799] msm_serial_hsl: detected port #0
  83. <6>[    0.601013] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  84. <6>[    0.601379] msm_serial_hsl: driver initialized
  85. <6>[    0.602508] msm_rotator_probe: rotator_hw_revision=1
  86. <6>[    0.608032] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  87. <6>[    0.609466] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  88. <6>[    0.610504] kgsd kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  89. <6>[    0.616546] brd: module loaded
  90. <6>[    0.619323] loop: module loaded
  91. <6>[    0.619750] is_lpcharging_state: is_lpm_boot:1
  92. <6>[    0.619842] akm8975_init : LPM Charging Mode! return 0
  93. <6>[    0.619934] is_lpcharging_state: is_lpm_boot:1
  94. <6>[    0.620086] k3dh_init : LPM Charging Mode! return 0
  95. <6>[    0.620300] sec_jack:sec_jack_probe : Registering jack driver
  96. <6>[    0.620605] input: sec_jack as /devices/virtual/input/input0
  97. <5>[    0.621490] pm8xxx_upl_probe: OK
  98. <3>[    0.622406] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  99. <4>[    0.622772] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  100. <4>[    0.623199] THNAK YOU!!
  101. <6>[    0.623321] vibrator I2C attach success!!!
  102. <4>[    0.623474] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  103. <4>[    0.640502] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  104. <6>[    0.641357] is_lpcharging_state: is_lpm_boot:1
  105. <6>[    0.641510] a2220_init : LPM Charging Mode! return 0
  106. <4>[    0.641784] level device init
  107. <6>[    0.646789] adie_codec_register_codec_operations: codec type 1
  108. <6>[    0.647399] Loading pn544 driver
  109. <6>[    0.647521] pn544_probe : IRQ num 628
  110. <6>[    0.647735] pn544_probe : requesting IRQ 628
  111. <6>[    0.648590] SCSI Media Changer driver v0.25
  112. <6>[    0.648986] PPP generic driver version 2.4.2
  113. <6>[    0.649200] PPP Deflate Compression module registered
  114. <6>[    0.649353] PPP BSD Compression module registered
  115. <6>[    0.650054] PPP MPPE Compression module registered
  116. <6>[    0.650207] NET: Registered protocol family 24
  117. <6>[    0.650329] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  118. <6>[    0.650512] CSLIP: code copyright 1989 Regents of the University of California.
  119. <6>[    0.651092] tun: Universal TUN/TAP device driver, 1.6
  120. <6>[    0.651184] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  121. <6>[    0.651855] smsc911x: Driver version 2008-10-21
  122. <6>[    0.652160] usbcore: registered new interface driver asix
  123. <6>[    0.652343] usbcore: registered new interface driver cdc_ether
  124. <6>[    0.652496] usbcore: registered new interface driver net1080
  125. <6>[    0.652679] usbcore: registered new interface driver cdc_subset
  126. <6>[    0.652801] usbcore: registered new interface driver zaurus
  127. <6>[    0.652984] cdc_ncm: 04-Aug-2011
  128. <6>[    0.653106] usbcore: registered new interface driver cdc_ncm
  129. <6>[    0.653228] rmnet_init: SMD devices[8]
  130. <6>[    0.656860] rmnet_init: SDIO devices[8]
  131. <3>[    0.659729] msm_hsusb_smb328a_vbus_power attached 0
  132. <6>[    0.661834] msm_otg msm_otg: success to host_notify_dev_register
  133. <6>[    0.662109] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  134. <6>[    0.662506] host driver registered w/ tranceiver
  135. <6>[    0.662719] usbcore: registered new interface driver cdc_acm
  136. <6>[    0.662841] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  137. <6>[    0.663055] usbcore: registered new interface driver usblp
  138. <6>[    0.663238] Initializing USB Mass Storage driver...
  139. <6>[    0.663360] usbcore: registered new interface driver usb-storage
  140. <6>[    0.663543] USB Mass Storage support registered.
  141. <6>[    0.663665] usbcore: registered new interface driver ums-alauda
  142. <6>[    0.663879] usbcore: registered new interface driver ums-cypress
  143. <6>[    0.664001] usbcore: registered new interface driver ums-datafab
  144. <6>[    0.664215] usbcore: registered new interface driver ums-freecom
  145. <6>[    0.664337] usbcore: registered new interface driver ums-isd200
  146. <6>[    0.664550] usbcore: registered new interface driver ums-jumpshot
  147. <6>[    0.664672] usbcore: registered new interface driver ums-karma
  148. <6>[    0.664886] usbcore: registered new interface driver ums-onetouch
  149. <6>[    0.665008] usbcore: registered new interface driver ums-sddr09
  150. <6>[    0.665222] usbcore: registered new interface driver ums-sddr55
  151. <6>[    0.665344] usbcore: registered new interface driver ums-usbat
  152. <6>[    0.665557] usbcore: registered new interface driver usb_ehset_test
  153. <6>[    0.665924] peripheral driver registered w/ tranceiver
  154. <4>[    0.666137] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  155. <6>[    0.668029] android_usb gadget: Mass Storage Function, version: 2009/09/11
  156. <6>[    0.668212] android_usb gadget: Number of LUNs=2
  157. <6>[    0.668334]  lun0: LUN: removable file: (no medium)
  158. <6>[    0.668487]  lun1: LUN: removable file: (no medium)
  159. <6>[    0.668823] android_usb gadget: android_usb ready
  160. <6>[    0.670196] DIAG registered SDIO device
  161. <6>[    0.670440] diagchar initialized now
  162. <6>[    0.670776] mousedev: PS/2 mouse device common for all mice
  163. <6>[    0.672058] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input1
  164. <6>[    0.672637] is_lpcharging_state: is_lpm_boot:1
  165. <6>[    0.672729] mxt224_init : LPM Charging Mode! return ENODEV!
  166. <6>[    0.673095] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input2
  167. <6>[    0.673370] [sweep2wake]: set device pmic8xxx_pwrkey
  168. <6>[    0.674774] using rtc device, pm8xxx_rtc, for alarms
  169. <6>[    0.674896] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  170. <6>[    0.675354] i2c /dev entries driver
  171. <6>[    0.676757] is_lpcharging_state: is_lpm_boot:1
  172. <6>[    0.676849] yda165_init : LPM Charging Mode! return 0
  173. <6>[    0.677032] is_lpcharging_state: is_lpm_boot:1
  174. <6>[    0.677124] gp2a_opt_init : LPM Charging Mode! return 0
  175. <6>[    0.677276] is_lpcharging_state: is_lpm_boot:1
  176. <6>[    0.677368] lightsensor_init : LPM Charging Mode! return 0
  177. <6>[    0.677734] input: fsa9480 as /devices/i2c-5/5-0025/input/input3
  178. <6>[    0.680480] fsa9480 5-0025:  fsa9480_reg_init dev ID: 0x0
  179. <4>[    0.680786] i2c-core: driver [fsa9480] using legacy resume method
  180. <6>[    0.680908] is_lpcharging_state: is_lpm_boot:1
  181. <6>[    0.681060] k3g_init : LPM Charging Mode! return 0
  182. <6>[    0.681701] input: orientation_sensor as /devices/virtual/input/input4
  183. <6>[    0.682098] lirc_dev: IR Remote Contrïl driver registered, major 239
  184. <6>[    0.682220] IR NEC protocol handler initialized
  185. <6>[    0.682373] IR RC5(x) protocol handler initialized
  186. <6>[    0.682464] IR RC6 protocol handler initialized
  187. <6>[    0.682586] IR JVC protocol handler initialized
  188. <6>[    0.682739] IR Sony protocol handler initialized
  189. <6>[    0.682830] IR RC5 (streamzap) protocol handler initialized
  190. <6>[    0.683013] IR LIRC bridge handler initialized
  191. <6>[    0.683105] Linux video capture interface: v2.00
  192. <6>[    0.683288] usbcore: registered new interface driver uvcvideo
  193. <6>[    0.683471] USB Video Class driver (v1.1.0)
  194. <6>[    0.684112] is_lpcharging_state: is_lpm_boot:1
  195. <6>[    0.684265] sec_m5mo_init : LPM Charging Mode! return 0
  196. <6>[    0.684356] is_lpcharging_state: is_lpm_boot:1
  197. <6>[    0.684509] sec_s5k5bafx_camera_init : LPM Charging Mode! return 0
  198. 4>[    0.684631] [Torch] ledflash_init
  199. <6>[    0.684906] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  200. <6>[    0.685272] max17040_probe: MAX17043 driver Loading!
  201. <6>[    0.685394] max17040_get_version :
  202. <6>[    0.686279] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  203. <6>[    0.687103] max17040_get_rcomp : current rcomp = 0xc71f(199)
  204. <6>[    0.688385] max17040_get_rcomp : current rcomp = 0xc71f(199)
  205. <4>[    0.691833] i2c-core: driver [max17040] using legacy suspend method
  206. <4>[    0.692016] i2c-core: driver [max17040] using legacy resume method
  207. <6>[    0.692169] smb328a_probe: SMB328A driver Loading!
  208. <6>[    0.692352] is_lpcharging_state: is_lpm_boot:1
  209. <6>[    0.692443] smb328a_probe : is lpm charging mode (1)
  210. <6>[    0.693756] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  211. <6>[    0.695373] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  212. <4>[    0.696014] i2c-core: driver [smb328a] using legacy suspend method
  213. <4>[    0.696105] i2c-core: driver [smb328a] using legacy resume method
  214. <6>[    0.696746] msm_adc successfully registered
  215. <5>[    0.697296] tsens_tm_probe: OK
  216. <3>[    0.697601] pm8xxx_init_adc: adc_channel_open() failed.
  217. <3>[    0.697692] pm8xxx_tm_probe: Unable to initialize adc
  218. <4>[    0.697784] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  219. <6>[    0.698364] pm8xxx_tm_probe: OK
  220. <6>[    0.698883] device-mapper: uevent: version 1.0.3
  221. <6>[    0.699310] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  222. <6>[    0.699615] Bluetooth: HCI UART driver ver 2.2
  223. <6>[    0.699768] Bluetooth: HCI H4 protocol initialized
  224. <6>[    0.699859] Bluetooth: HCI_IBS protocol initialized
  225. <6>[    0.700012] Bluetooth: BlueSleep Mode Driver Ver 1.1
  226. <6>[    0.700622] cpuidle: using governor ladder
  227. <6>[    0.700744] cpuidle: using governor menu
  228. <6>[    0.701232] mmc0: mci-version: 0
  229. <3>[    0.701416] mmc0: No card detect facilities available
  230. <6>[    0.701751] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  231. <6>[    0.701930] mmc0: 8 bit data mode enabled
  232. <6>[    0.702087] mmc0: 4 bit data mode disabled
  233. <6>[    0.702178] mmc0: polling status mode disabled
  234. <6>[    0.702301] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  235. <6>[    0.702453] mmc0: Slot eject status = 0
  236. <6>[    0.702545] mmc0: Power save feature enable = 1
  237. <6>[    0.702728] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d800000
  238. <6>[    0.702819] mmc0: DM cmd busaddr 0x5d800000, cmdptr busaddr 0x5d817f40
  239. <6>[    0.703247] mmc1: mci-version: 0
  240. <6>[    0.704254] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  241. <6>[    0.704467] mmc1: 8 bit data mode disabled
  242. <6>[    0.704559] mmc1: 4 bit data mode enabled
  243. <6>[    0.704650] mmc1: polling status mode disabled
  244. <6>[    0.704803] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  245. <6>[    0.704925] mmc1: Slot eject status = 0
  246. <6>[    0.705078] mmc1: Power save feature enable = 1
  247. <6>[    0.705169] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d820000
  248. <6>[    0.705352] mmc1: DM cmd busaddr 0x5d820000, cmdptr busaddr 0x5d837f40
  249. <6>[    0.705688] mmc2: mci-version: 0
  250. <3>[    0.705932] mmc2: No card detect facilities available
  251. <6>[    0.706237] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  252. <6>[    0.706420] mmc2: 8 bit data mode disabled
  253. <6>[    0.706512] mmc2: 4 bit data mode enabled
  254. <6>[    0.706604] mmc2: polling status mode disabled
  255. <6>[    0.706756] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  256. <6>[    0.706878] mmc2: Slot eject status = 0
  257. <6>[    0.707031] mmc2: Power save feature enable = 1
  258. <6>[    0.707122] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d840000
  259. <6>[    0.707305] mmc2: DM cmd busaddr 0x5d840000, cmdptr busaddr 0x5d857f40
  260. <7>[    0.707916] Registered led device: camera:flash0
  261. <7>[    0.708160] Registered led device: camera:flash1
  262. <6>[    0.709899] usbcore: registered new interface driver usbhid
  263. <6>[    0.710083] usbhid: USB HID core driver
  264. <6>[    0.710540] logger: created 512K log 'log_main'
  265. <6>[    0.710723] logger: created 256K log 'log_events'
  266. <6>[    0.710937] logger: created 512K log 'log_radio'
  267. <6>[    0.711120] logger: created 256K log 'log_system'
  268. <6>[    0.711212] sec_getlog_supply_loggerinfo: 0xc11c52c0 0xc12452c0 0xc12c52c0 0xc13052c0
  269. <6>[    0.712432] zram: Created 2 device(s) ...
  270. <6>[    0.712921] usbcore: registered new interface driver snd-usb-audio
  271. <6>[    0.713806] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  272. <6>[    0.714141] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  273. <6>[    0.714385] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  274. <6>[    0.715332] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  275. <6>[    0.716552] ALSA device list:
  276. <6>[    0.716644]   #0: msm-audio
  277. <6>[    0.717102] oprofile: using arm/armv7-scorpionmp
  278. <6>[    0.717376] GACT probability NOT on
  279. <6>[    0.717498] Mirror/redirect action on
  280. <6>[    0.717590] u32 classifier
  281. <6>[    0.717681]     Actions configured
  282. <6>[    0.717834] Netfilter messages via NETLINK v0.30.
  283. <6>[    0.717987] nf_conntrack version 0.5.0 (12554 buckets, 50216 max)
  284. <6>[    0.718688] ctnetlink v0.93: registering with nfnetlink.
  285. <6>[    0.718841] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  286. <6>[    0.718994] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  287. <6>[    0.719512] xt_time: kernel timezone is -0000
  288. <6>[    0.719848] ip_tables: (C) 2000-2006 Netfilter Core Team
  289. <6>[    0.720184] arp_tables: (C) 2002 David S. Miller
  290. <6>[    0.720428] TCP cubic registered
  291. <6>[    0.720520] Initializing XFRM netlink socket
  292. <6>[    0.721099] NET: Registered protocol family 10
  293. <6>[    0.723083] Mobile IPv6
  294. <6>[    0.723205] ip6_tables: (C) 2000-2006 Netfilter Core Team
  295. <6>[    0.723449] IPv6 over IPv4 tunneling driver
  296. <6>[    0.724517] NET: Registered protocol family 17
  297. <6>[    0.724639] NET: Registered protocol family 15
  298. <6>[    0.724884] Bluetooth: RFCOMM TTY layer initialized
  299. <6>[    0.725067] Bluetooth: RFCOMM socket layer initialized
  300. <6>[    0.725158] Bluetooth: RFCOMM ver 1.11
  301. <6>[    0.725341] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  302. <6>[    0.725433] Bluetooth: BNEP filters: protocol multicast
  303. <6>[    0.725585] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  304. <6>[    0.725860] NET: Registered protocol family 35
  305. <5>[    0.726043] Registering the dns_resolver key type
  306. <6>[    0.726257] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  307. <5>[    0.726531] Registering SWP/SWPB emulation handler
  308. <6>[    0.796966] clock_late_init() disabled 202 unused clocks
  309. <6>[    0.802185] MSM Watchdog Initialized
  310. <3>[    0.802917] set_dload_mode <0> ( C0016B04 )
  311. <4>[    0.803741] [TKEY] touchkey_init START
  312. <6>[    0.803863] is_lpcharging_state: is_lpm_boot:1
  313. <6>[    0.804016] touchkey_init : LPM Charging Mode! return ENODEV!
  314. <6>[    0.805175] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-11-17 00:47:04 UTC (1447721224)
  315. <6>[    0.805480] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  316. <6>[    0.806030] sec_bat_get_lpcharging_state: LP charging:1
  317. <3>[    0.806976] sec_bat_polling_work: adc work already on a queue
  318. <3>[    0.808410] [fg] p:9133, s1:97, s2:100, v:4145000, t:0
  319. <4>[    0.808471] ------------[ cut here ]------------
  320. <4>[    0.808502] WARNING: at .././../../../../kernel/samsung/msm8660/fs/proc/generic.c:586 proc_register+0x150/0x1ac()
  321. <4>[    0.808563] proc_dir_entry '/proc/last_kmsg' already registered
  322. <4>[    0.808593] Modules linked in:
  323. <4>[    0.808624] [<c010a798>] (unwind_backtrace+0x0/0xe0) from [<c018a02c>] (warn_slowpath_common+0x4c/0x64)
  324. <4>[    0.808685] [<c018a02c>] (warn_slowpath_common+0x4c/0x64) from [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c)
  325. <4>[    0.808746] [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0270f80>] (proc_register+0x150/0x1ac)
  326. <4>[    0.808807] [<c0270f80>] (proc_register+0x150/0x1ac) from [<c0271364>] (create_proc_entry+0x70/0x90)
  327. <4>[    0.808837] [<c0271364>] (create_proc_entry+0x70/0x90) from [<c00309b8>] (ram_console_late_init+0x24/0x70)
  328. <4>[    0.808898] [<c00309b8>] (ram_console_late_init+0x24/0x70) from [<c0100408>] (do_one_initcall+0x8c/0x150)
  329. <4>[    0.808959] [<c0100408>] (do_one_initcall+0x8c/0x150) from [<c00089b8>] (kernel_init+0x9c/0x144)
  330. <4>[    0.809020] [<c00089b8>] (kernel_init+0x9c/0x144) from [<c0105bfc>] (kernel_thread_exit+0x0/0x8)
  331. <4>[    0.809051] ---[ end trace 762838484021527b ]---
  332. <4>[    0.810180] Warning: unable to open an initial console.
  333. <6>[    0.810607] Freeing init memory: 272K
  334. <5>[    0.812744] init: init started!
  335. <3>[    0.813873] SELinux:  policydb version 30 does not match my version range 15-26
  336. <3>[    0.814178] init: SELinux:  Could not load policy:  Invalid argument
  337. <3>[    0.814483] init: failed to load policy: Invalid argument
  338. <3>[    0.814575] init: Security failure; rebooting into recovery mode...
  339. <6>[    0.814849] SysRq : Emergency Remount R/O
  340. <4>[    0.815063] Emergency Remount complete
  341. <0>[    0.815490] (sec_debug_set_upload_magic) 0
  342. <3>[    0.815765] set_dload_mode <0> ( C01741C4 )
  343. <6>[    0.816589] pn544_shutdown
  344. <4>[    0.818237] ld9040 start ld9040_shutdown
  345. <4>[    0.818420] ld9040 lcdc_ld9040_panel_off +  (0,0,0)
  346. <4>[    0.818511] ld9040 lcdc_ld9040_panel_off -
  347. <6>[    0.819458] mmc0: new high speed MMC card at address 0001
  348. <6>[    0.819732] disable_charging_before_reset: check voltage(4145000)
  349. <6>[    0.819946] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  350. <4>[    0.820037] Disabling non-boot CPUs ...
  351. <4>[    0.820190] set_freq_limit: 0x8 0, min 384000, max 1242000
  352. <6>[    0.820648] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  353. <6>[    0.821960] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  354. [0] ========================================
  355. [0] welcome to lk
  356. [0] Original Log Magic = 0x4d474f4c
  357. [0] calling constructors
  358. [0] initializing heap
  359. [0] initializing threads
  360. [0] initializing dpc
  361. [0] initializing timers
  362. [0] creating bootstrap completion thread
  363. [0] creating bootstrap progress monitor thread
  364. [10] top of bootstrap3()
  365. [10] top of bootstrap2()
  366. [10] initializing platform
  367. [10] initializing target
  368. [380] calling apps_init()
  369. [390] aboot_init()
  370. [390] aboot_banner()
  371. [410] power on reason = 0x10, msm watchdog status = 0x4
  372. [610] aboot_check_rtc_alarm_boot()
  373. [610] aboot_dev_init()
  374. [610] init_microusb_ic()
  375. [1410] init_microusb_ic success1
  376. [1410] init_microusb_ic success2
  377. [1410] smb328a_init_charger : log(1)
  378. [1410] smb328a_init_charger : log(2)
  379. [1420] smb328a_init_charger : is_reboot_mode = 0, vcell = 4158
  380. [1420] check valid dcin (0x33) = 0x2
  381. [1430] start_charging : state(1), value(0x2d)
  382. [1430] smb328a_allow_volatile_writes : (0x31) = 0xad
  383. [1450] start_charging : state(1), value(0x2d)
  384. [1450] REG(0x31) = 0x2d
  385. [1450] REG(0x0) = 0x17
  386. [1460] REG(0x1) = 0x4
  387. [1460] REG(0x2) = 0xca
  388. [1460] REG(0x3) = 0x1a
  389. [1460] REG(0x4) = 0x4e
  390. [1470] REG(0x5) = 0x88
  391. [1470] REG(0x6) = 0x55
  392. [1470] REG(0x7) = 0xf6
  393. [1470] REG(0x8) = 0x0
  394. [1480] REG(0x9) = 0x0
  395. [1480] REG(0x32) = 0x0
  396. [1480] REG(0x33) = 0x2
  397. [1480] REG(0x34) = 0x0
  398. [1490] REG(0x35) = 0x0
  399. [1490] REG(0x36) = 0x5
  400. [1490] REG(0x37) = 0x0
  401. [1490] REG(0x38) = 0x30
  402. [1500] REG(0x39) = 0x0
  403. [1500] battery pole check!
  404. [1510] fuelguage : soc = 91%, vcell = 4158mV
  405. [1520] fuelguage : rcomp(c71f) ==?? 0xc71f
  406. [1530] 9599 = ( 415800 - 341495 ) * 12919 / 100000
  407. [2060] HW_REV = 0xd
  408. [2060] reboot_mode = 0x0
  409. [2060] debuglevel = 0x574f4c44
  410. [2060] do key check
  411. [2060] aboot_check_lpm : rb = 0, chg = 2, av = 0
  412. [2070] check valid dcin (0x33) = 0x2
  413. [2070] set lpm_mode
  414. [2070] get mpp11 state (2) = 0
  415. [3600] enter lpm booting mode
  416. [3600] boot_linux_from_mmc()
  417. [4430] kernel  @ 40408000 (3918016 bytes)
  418. [4430] ramdisk @ 41800000 (974717 bytes)
  419. [4430] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13'
  420. [4430] Booting Linux
  421. [4430] boot_linux()
  422. [4460] booting linux @ 0x40408000, ramdisk @ 0x41800000 (974717)
  423. [4460] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13
  424. [4460] entry()
  425. <6>[    0.462860] sec_log_save_old: saved old log at 77874@de160000
  426. <6>[    0.000000] [0:        swapper:    0] Booting Linux on physical CPU 0
  427. <6>[    0.000000] [0:        swapper:    0] Initializing cgroup subsys cpu
  428. <5>[    0.000000] [0:        swapper:    0] Linux version 3.0.101-slim-gaf5480c (nospamdan@bacon) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Nov 16 21:32:41 CET 2015
  429. <4>[    0.000000] [0:        swapper:    0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  430. <4>[    0.000000] [0:        swapper:    0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  431. <4>[    0.000000] [0:        swapper:    0] Machine: QCT MSM8X60 FUSION FFA
  432. <6>[    0.000000] [0:        swapper:    0] memory pool 0 (start 38000000 size 600000) initialized
  433. <6>[    0.000000] [0:        swapper:    0] memory pool 1 (start 38600000 size 3802000) initialized
  434. <6>[    0.000000] [0:        swapper:    0] memory pool 3 (start 78f00000 size 7100000) initialized
  435. <4>[    0.000000] [0:        swapper:    0] Memory policy: ECC disabled, Data cache writealloc
  436. <6>[    0.000000] [0:        swapper:    0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0,  hw_plat_ver=65536
  437. <6>[    0.000000] [0:        swapper:    0]  accessory_chip=0 hw_plat_subtype=0
  438. <6>[    0.000000] [0:        swapper:    0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  439. <7>[    0.000000] [0:        swapper:    0] On node 0 totalpages: 211200
  440. <7>[    0.000000] [0:        swapper:    0] free_area_init_node: node 0, pgdat c0cef9a0, node_mem_map c14ee000
  441. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 992 pages used for memmap
  442. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 0 pages reserved
  443. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 105248 pages, LIFO batch:31
  444. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 1048 pages used for memmap
  445. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 103912 pages, LIFO batch:31
  446. <6>[    0.000000] [0:        swapper:    0] allocating 12906496 bytes at c1cf0000 (420f0000 physical) for fb
  447. <6>[    0.000000] [0:        swapper:    0] PERCPU: Embedded 8 pages/cpu @c2942000 s9888 r8192 d14688 u32768
  448. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: s9888 r8192 d14688 u32768 alloc=8*4096
  449. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: [0] 0 [0] 1
  450. <4>[    0.000000] [0:        swapper:    0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 209160
  451. <5>[    0.000000] [0:        swapper:    0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=f3ae2762 androidboot.baseband=csfb
  452. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup)
  453. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  454. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  455. <4>[    0.000000] hw_rev_setup : HW rev value is intialized first
  456. <4>[    0.000000] HW rev value : 0xD
  457. <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  458. <6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  459. <6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  460. <6>[    0.000000] Memory: 43MB 760MB 22MB = 825MB total
  461. <5>[    0.000000] Memory: 802516k/802516k available, 159020k reserved, 419840K highmem
  462. <5>[    0.000000] Virtual kernel memory layout:
  463. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  464. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  465. <5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  466. <5>[    0.000000]     vmalloc : 0xdf800000 - 0xfa000000   ( 424 MB)
  467. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
  468. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  469. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  470. <5>[    0.000000]       .init : 0xc0008000 - 0xc004c000   ( 272 kB)
  471. <5>[    0.000000]       .text : 0xc0100000 - 0xc0b78208   (10721 kB)
  472. <5>[    0.000000]       .data : 0xc0c00000 - 0xc0cf2488   ( 970 kB)
  473. <5>[    0.000000]        .bss : 0xc0cf24ac - 0xc1351ee8   (6527 kB)
  474. <6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  475. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  476. <6>[    0.000000] NR_IRQS:855
  477. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  478. <6>[    0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67656)
  479. <6>[    0.150207] pid_max: default: 32768 minimum: 301
  480. <6>[    0.150543] Security Framework initialized
  481. <6>[    0.150573] SELinux:  Initializing.
  482. <7>[    0.150634] SELinux:  Starting in permissive mode
  483. <6>[    0.150817] Mount-cache hash table entries: 512
  484. <6>[    0.152160] Initializing cgroup subsys cpuacct
  485. <6>[    0.152252] Initializing cgroup subsys freezer
  486. <6>[    0.152313] CPU: Testing write buffer coherency: ok
  487. <6>[    0.152679] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  488. <4>[    0.185241] CPU1: Booted secondary processor
  489. <6>[    0.195129] Brought up 2 CPUs
  490. <6>[    0.195129] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  491. <6>[    0.210174] print_constraints: dummy:
  492. <3>[    0.210296] rdev_init_debugfs: Error-Bad Function Input
  493. <6>[    0.210601] NET: Registered protocol family 16
  494. <3>[    0.210815] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  495. <6>[    0.212890] (sec_get_lpm_mode) 1a2b3c10
  496. <0>[    0.212921] (sec_get_lpm_mode) 1
  497. <0>[    0.212921] (sec_debug_init)
  498. <0>[    0.212951] (sec_debug_init) reset_reason : 0x1a2b3c10
  499. <6>[    0.212951] msm_rpm_init: RPM firmware 2.0.4196187
  500. <6>[    0.213775] saw_probe: id=0, name=8901_s0
  501. <6>[    0.214233] saw_probe: id=1, name=8901_s1
  502. <6>[    0.215881] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  503. <6>[    0.215911] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  504. <6>[    0.215942] rcg_clk_handoff: sdc1_clk rate=48000000
  505. <6>[    0.216003] rcg_clk_handoff: dsi_byte_clk rate=1
  506. <6>[    0.216064] rcg_clk_handoff: mdp_clk rate=200000000
  507. <6>[    0.216186] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  508. <6>[    0.218200] Max ACPU freq: 1512000 KHz
  509. <6>[    0.224029] CPU0: 23 scaling frequencies supported.
  510. <6>[    0.224060] CPU1: 23 scaling frequencies supported.
  511. <6>[    0.224304] msm8x60_init_mmc : skip sdcc2 config for lpm boot
  512. <6>[    0.224426] msm8x60_init_mmc : skip sdcc5 config for lpm boot
  513. <3>[    0.224426] LTE_switch_init!
  514. <3>[    0.224487] LTE_switch_init end!
  515. <6>[    0.225952] pm8058_probe: PMIC revision: E3
  516. <6>[    0.227264] pm_gpio_probe: OK: base=173, ngpio=40
  517. <6>[    0.227478] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  518. <6>[    0.228790] pm8901_probe: PMIC REVISION = F4
  519. <6>[    0.229248] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  520. <6>[    0.244049] ram_console: got buffer at 77800000, size 100000
  521. <6>[    0.244140] ram_console: found existing buffer, size 29459, start 29459
  522. <6>[    0.339477] console [ram-1] enabled
  523. <6>[    0.339935] msm8x60_init : skip charm devices for lpm boot
  524. <3>[    0.340820] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  525. <4>[    0.341522] tsp_power_init: MXT224 Power On skipped by LPM
  526. <4>[    0.341583] brcm_wlan_init: start
  527. <4>[    0.341766] brcm_init_wlan_mem: WIFI MEM Allocated
  528. <6>[    0.360137] bio: create slab <bio-0> at 0
  529. <6>[    0.361419] ION heap vmalloc created
  530. <6>[    0.361602] ION heap mm created at 38800000 with size 3600000
  531. <6>[    0.361694] ION heap mm_fw created at 38600000 with size 200000
  532. <6>[    0.361877] ION heap mfc created at 3be00000 with size 2000
  533. <6>[    0.361999] ION heap sf created at 78f00000 with size 4000000
  534. <6>[    0.362182] ION heap camera_preview created at 7cf00000 with size 1200000
  535. <6>[    0.362274] ION heap wb created at 7e100000 with size 1400000
  536. <6>[    0.362457] ION heap qsecom created at 7f500000 with size 600000
  537. <6>[    0.362548] ION heap audio created at 7fb00000 with size 4cf000
  538. <5>[    0.362823] pmic8058_pwm_probe: OK
  539. <5>[    0.363342] SCSI subsystem initialized
  540. <6>[    0.363616] usbcore: registered new interface driver usbfs
  541. <6>[    0.363830] usbcore: registered new interface driver hub
  542. <6>[    0.364013] usbcore: registered new device driver usb
  543. <6>[    0.364562] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  544. <6>[    0.364807] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  545. <6>[    0.365112] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  546. <6>[    0.365417] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  547. <6>[    0.365722] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  548. <6>[    0.365997] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  549. <6>[    0.366241] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  550. <6>[    0.366577] Advanced Linux Sound Architecture Driver Version 1.0.24.
  551. <6>[    0.367095] Bluetooth: Core ver 2.16
  552. <6>[    0.367279] NET: Registered protocol family 31
  553. <6>[    0.367370] Bluetooth: HCI device and connection manager initialized
  554. <6>[    0.367492] Bluetooth: HCI socket layer initialized
  555. <6>[    0.367584] Bluetooth: L2CAP socket layer initialized
  556. <6>[    0.367797] Bluetooth: SCO socket layer initialized
  557. <6>[    0.360347] cfg80211: Calling CRDA to update world regulatory domain
  558. <6>[    0.368621] Switching to clocksource gp_timer
  559. <6>[    0.387573] NET: Registered protocol family 2
  560. <6>[    0.387786] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  561. <6>[    0.388244] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  562. <6>[    0.389129] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  563. <6>[    0.390197] TCP: Hash tables configured (established 65536 bind 65536)
  564. <6>[    0.390350] TCP reno registered
  565. <6>[    0.390441] UDP hash table entries: 256 (order: 1, 12288 bytes)
  566. <6>[    0.390533] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  567. <6>[    0.391052] NET: Registered protocol family 1
  568. <6>[    0.391448] RPC: Registered named UNIX socket transport module.
  569. <6>[    0.391571] RPC: Registered udp transport module.
  570. <6>[    0.391662] RPC: Registered tcp transport module.
  571. <6>[    0.391815] RPC: Registered tcp NFSv4.1 backchannel transport module.
  572. <6>[    0.392089] Trying to unpack rootfs image as initramfs...
  573. <6>[    0.432159] Freeing initrd memory: 948K
  574. <6>[    0.432434] PMU: registered new PMU device of type 0
  575. <6>[    0.432708] PMU: registered new PMU device of type 1
  576. <6>[    0.433166] ETM/ETB intialized.
  577. <6>[    0.433349] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  578. <6>[    0.433807] pil_modem pil_modem: using secure boot
  579. <6>[    0.433959] sdio_al:SDIO-AL SW version 1.30
  580. <3>[    0.436126] smd_channel_probe_worker: allocation table not initialized
  581. <6>[    0.440490] msm_dsps driver version 3.03.
  582. <6>[    0.443145] lpa_if_init: lpa_if_ptr 0xde9d0e00   buf_vir 0xffdf0000   buf_phy 0x5e5a0000  buf_zise 65536
  583. <3>[    0.445098] sec_switch_probe enter sec_switch_probe
  584. <5>[    0.447082] msm_rpm_log_probe: OK
  585. <3>[    0.447235] [BT] bcm4330_bluetooth_init
  586. <3>[    0.447601] [BT] bcm4330_bluetooth_probe
  587. <3>[    0.447967] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  588. <3>[    0.448028] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  589. <6>[    0.462860] sec_log_save_old: saved old log at 77874@de160000
  590. <6>[    0.467102] sec_getlog_supply_kloginfo: 0xc112a518
  591. <6>[    0.467346] audit: initializing netlink socket (disabled)
  592. <5>[    0.467529] type=2000 audit(0.430:1): initialized
  593. <4>[    0.552520] highíem bounce pool size: 64 pages
  594. <6>[    0.552764] ashmem: initialized
  595. <6>[    0.558624] exFAT: Core Version 1.2.4
  596. <6>[    0.558715] exFAT: FS Version 1.2.4
  597. <6>[    0.560668] NTFS driver 2.1.30 SFlags: R/W].
  598. <6>[    0.561096] fuse init (API version 7.16)
  599. <6>[    0.561767] msgmni has been set to 749
  600. <7>[    0.561889] SELinux:  Registering netfilter hooks
  601. <6>[    0.563903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  602. <6>[    0.564025] io scheduler noop registered
  603. <6>[    0.564178] io scheduler deadline registered (default)
  604. <6>[    0.564300] io scheduler row registered
  605. <6>[    0.564483] io scheduler cfq registered
  606. <4>[    0.566772] mdp4_csc_config: Block type 10 isn't supported ây CSC.
  607. <4>[    0.566894] mdp4_csc_config: Block type 8 isn't supported by CSC.
  608. <4>[    0.570800] ld9040 start lcdc_ld9040_panel_init
  609. <4>[    0.570983] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  610. <4>[    0.571136] ld9040 msm_fb_add_device START
  611. <6>[    0.571258] setting pdata->panel_info.fb_num to 3. type: 0
  612. <3>[    0.571411] msm_fb_add_device: msm_fb_device_alloc failed!
  613. <4>[    0.571502] ld9040 msm_fb_add_device end
  614. <4>[    0.571990] ld9040 platform_driver_register(&this_driver) is done
  615. <4>[    0.572082] ld9040 LDI : EA8868, pixelclock 27400000
  616. <6>[    0.572448] setting pdata->panel_info.fb_num to 3. type: 3
  617. <6>[    0.575317] mdp4_lcdc_vsync_init: ndx=0
  618. <6>[    0.577545] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  619. <6>[    0.577728] is_lpcharging_state: is_lpm_boot:1
  620. <6>[    0.577850] [lpm-mode] skip init logo!
  621. <7>[    0.578338] Registered led device: lcd-backlight
  622. <6>[    0.578460] mdp4_lcdc_vsync_init: ndx=0
  623. <6>[    0.578643] sec_getlog_supply_fbinfo: 0x420f0000 480 800 32 2
  624. <4>[    0.578765] ld9040 platform_device_register(&this_device) is done
  625. <6>[    0.579376] hdmi_msm hdmi_msm.0: probe
  626. <6>[    0.579803] hdmi_msm hdmi_msm.1: probe
  627. <6>[    0.579925] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  628. <6>[    0.580169] setting pdata->panel_info.fb_num to 1. type: 7
  629. <6>[    0.580993] mdp4_dtv_vsync_init: ndx=0
  630. <6>[    0.583068] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  631. <6>[    0.583$96] mdp4_dtv_vsync_init: ndx=0
  632. <6>[    0.583740] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de185c08
  633. <6>[    0.583862] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  634. <6>[    0.584045] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  635. <7>[    0.584381] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  636. <6>[    0.585357]
  637. <6>[    0.585357]  msm_vidc_enc: Inside vid_enc_init()
  638. <6>[    0.585784]
  639. <6>[    0.585815]  msm_vidc_enc: Inside vid_enc_vcd_init()
  640. <6>[    0.586059] is_lpcharging_state: is_lpm_boot:1
  641. <6>[    0.586303] sii9234_init : LPM Charging Mode! return 0
  642. <6>[    0.586730] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  643. <6>[    0.587158] msm_serial_hs module loaded
  644. <6>[    0.587310] msm_serial_hsl: detected port #1
  645. <6>[    0.587554] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  646. <6>[    0.587829] msm_serial_hsl: detected port #0
  647. <6>[    0.588073] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  648. <6>[    0.588409] msm_serial_hsl: driver initialized
  649. <6>[    0.589569] msm_rotator_probe: rotator_hw_revision=1
  650. <6>[    0.595092] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  651. <6>[    0.596466] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  652. <6>[    0.597534] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  653. <6>[    0.603668] brd: module loaded
  654. <6>[    0.606353] loop: module loaded
  655. <6>[    0.606750] is_lpcharging_state: is_lpm_boot:1
  656. <6>[    0.606842] akm8975_init : LPM Charging Mode! return 0
  657. <6>[    0.606964] is_lpcharging_state: is_lpm_boot:1
  658. <6>[    0.607116] k3dh_init : LPM Charging Mode! return 0
  659. <6>[    0.607299] sec_jack:sec_jack_probe : Registering jack driver
  660. <6>[    0.607635] input: sec_jack as /devices/virtual/input/input0
  661. <5>[    0.608489] pm8xxx_upl_probe: OK
  662. <3>[    0.609466] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  663. <4>[    0.609832] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  664. <4>[    0.610229] THNAK YOU!!
  665. <6>[    0.610382] vibrator I2C attach success!!!
  666. <4>[    0.610504] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  667. <4>[    0.631195] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  668. <6>[    0.632049] is_lpcharging_state: is_lpm_boot:1
  669. <6>[    0.632202] a2220_init : LPM Charging Mode! return 0
  670. <4>[    0.632446] level device init
  671. <6>[    0.637451] adie_codec_register_codec_operations: codec type 1
  672. <6>[    0.638061] Loading pn544 driver
  673. <6>[    0.638183] pn544_probe : IRQ num 628
  674. <6>[    0.638397] pn544_probe : requesting IRQ 628
  675. <6>[    0.639282] SCSI Media Changer driver v0.25
  676. <6>[    0.639648] PPP generic driver version 2.4.2
  677. <6>[    0.639892] PPP Deflate Compression module registered
  678. <6>[    0.640045] PPP BSD Compression module registered
  679. <6>[    0.640716] PPP MPPE Compression module registered
  680. <6>[    0.640869] NET: Registered protocol family 24
  681. <6>[    0.640991] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  682. <6>[    0.641174] CSLIP: code copyright 1989 Regents of the University of California.
  683. <6>[    0.641754] tun: Universal TUN/TAP device driver, 1.6
  684. <6>[    0.641845] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  685. <6>[    0.642517] smsc911x: Driver version 2008-10-21
  686. <6>[    0.642791] usbcore: registered new interface driver asix
  687. <6>[    0.643005] usbcore: registered new interface driver cdc_ether
  688. <6>[    0.643127] usbcore: registered new interface driver net1080
  689. <6>[    0.643341] usbcore: registered new interface driver cdc_subset
  690. <6>[    0.643463] usbcore: registered new interface driver zaurus
  691. <6>[    0.643646] cdc_ncm: 04-Aug-2011
  692. <6>[    0.643768] usbcore: registered new interface driver cdc_ncm
  693. <6>[    0.643859] rmnet_init: SMD devices[8]
  694. <6>[    0.647521] rmnet_init: SDIO devices[8]
  695. <3>[    0.650360] msm_hsusb_smb328a_vbus_power attached 0
  696. <6>[    0.652435] msm_otg msm_otg: success to host_notify_dev_register
  697. <6>[    0.652679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  698. <6>[    0.653106] host driver registered w/ tranceiver
  699. <6>[    0.653350] usbcore: registered new interface driver cdc_acm
  700. <6>[    0.653442] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  701. <6>[    0.653656] usbcore: registered new interface driver usblp
  702. <6>[    0.653839] Initializing USB Mass Storage driver...
  703. <6>[    0.653961] usbcore: registered new interface driver usb-storage
  704. <6>[    0.654144] USB Mass Storage support registered.
  705. <6>[    0.654266] usbcore: registered new interface driver ums-alauda
  706. <6>[    0.654449] usbcore: registered new interface driver ums-cypress
  707. <6>[    0.654602] usbcore: registered new interface driver ums-datafab
  708. <6>[    0.654785] usbcore: registered new interface driver ums-freecom
  709. <6>[    0.654937] usbcore: registered new interface driver ums-isd200
  710. <6>[    0.655120] usbcore: registered new interface driver ums-jumpshot
  711. <6>[    0.655273] usbcore: registered new interface driver ums-karma
  712. <6>[    0.655487] usbcore: registered new interface driver ums-onetouch
  713. <6>[    0.655609] usbcore: registered new interface driver ums-sddr09
  714. <6>[    0.655822] usbcore: registered new interface driver ums-sddr55
  715. <6>[    0.655944] usbcore: registered new interface driver ums-usbat
  716. <6>[    0.656158] usbcore: registered new interface driver usb_ehset_test
  717. <6>[    0.656524] peripheral driver registered w/ tranceiver
  718. <4>[    0.656738] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  719. <6>[    0.658630] android_usb gadget: Mass Storage Function, version: 2009/09/11
  720. <6>[    0.658782] android_usb gadget: Number of LUNs=2
  721. <6>[    0.658905]  lun0: LUN: removable file: (no medium)
  722. <6>[    0.659088]  lun1: LUN: removable file: (no medium)
  723. <6>[    0.659393] android_usb gadget: android_usb ready
  724. <6>[    0.660797] DIAG registered SDIO device
  725. <6>[    0.661041] diagchar initialized now
  726. <6>[    0.661376] mousedev: PS/2 mouse device common for all mice
  727. <6>[    0.662658] input: ffa-keypad as devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input1
  728. <6>[    0.663208] is_lpcharging_state: is_lpm_boot:1
  729. <6>[    0.663299] mxt224_init : LPM Charging Mode! return ENODEV!
  730. <6>[    0.663665] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input2
  731. <6>[    0.663940] [sweep2wake]: set device pmic8xxx_pwrkey
  732. <6>[    0.665344] using rtc device, pm8xxx_rtc, for alarms
  733. <6>[    0.665466] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  734. <6>[    0.665924] i2c /dev entries driver
  735. <6>[    0.667327] is_lpcharging_state: is_lpm_boot:1
  736. <6>[    0.667449] yda165_init : LPM Charging Mode! return 0
  737. <6>[    0.667602] is_lpcharging_state: is_lpm_boot:1
  738. <6>[    0.667694] gp2a_opt_init : LPM Charging Mode! return 0
  739. <6>[    0.667877] is_lpcharging_state: is_lpm_boot:1
  740. <6>[    0.667968] lightsensor_init : LPM Charging Mode! return 0
  741. <6>[    0.668304] input: fsa9480 as /devices/i2c-5/5-0025/input/input3
  742. <6>[    0.671142] fsa9480 5-0025:  fsa9480_reg_init dev ID: 0x0
  743. <4>[    0.671447] i2c-core: driver [fsa9480] using legacy resume method
  744. <6>[    0.671569] is_lpcharging_state: is_lpm_boot:1
  745. <6>[    0.671722] k3g_init : LPM Charging Mode! return 0
  746. <6>[    0.672363] input: orientation_sensor as /devices/virtual/input/input4
  747. <6>[    0.672760] lirc_dev: IR Remote Control driver registered, major 239
  748. <6>[    0.672882] IR NEC protocol handler initialized
  749. <6>[    0.673034] IR RC5(x) protocol handler initialized
  750. <6>[    0.673156] IR RC6 protocol handler initialized
  751. <6>[    0.673248] IR JVC protocol handler initialized
  752. <6>[    0.673400] IR Sony protocol handler initialized
  753. <6>[    0.673492] IR RC5 (streamzap) protocol handler initialized
  754. <6>[    0.673675] IR LIRC bridge handler initialized
  755. <6>[    0.673767] Linux video capture interface: v2.00
  756. <6>[    0.673950] usbcore: registered new interface driver uvcvideo
  757. <6>[    0.674133] USB Video Class driver (v1.1.0)
  758. <6>[    0.674774] is_lpcharging_state: is_lpm_boot:1
  759. <6>[    0.674926] sec_m5mo_init : LPM Charging Mode! return 0
  760. <6>[    0.675048] is_lpcharging_state: is_lpm_boot:1
  761. <6>[    0.675201] sec_s5k5bafx_camera_init : LPM Charging Mode! return 0
  762. <4>[    0.675292] [Torch] ledflash_init
  763. <6>[    0.675567] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  764. <6>[    0.675964] max17040_probe: MAX17043 driver Loading!
  765. <6>[    0.676055] max17040_get_version :
  766. <6>[    0.676940] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  767. <6>[    0.677764] max17040_get_rcomp : current rcomp = 0xc71f(199)
  768. <6>[    0.679046] max17040_get_rcomp : current rcomp = 0xc71f(199)
  769. <4>[    0.682495] i2c-core: driver [max17040] using legacy suspend method
  770. <4>[    0.682678] i2c-core: driver [max17040] using legacy resume method
  771. <6>[    0.682861] smb328a_probe: SMB328A driver Loading!
  772. <6>[    0.683013] is_lpcharging_state: is_lpm_boot:1
  773. <6>[    0.683105] smb328a_probe : is lpm charging mode (1)
  774. <6>[    0.684448] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  775. <6>[    0.686065] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  776. <4>[    0.686676] i2c-core: driver [smb328a] using legacy suspend method
  777. <4>[    0.686798] i2c-core: driver [smb328a] using legacy resume method
  778. <6>[    0.687408] msm_adc successfully registered
  779. <5>[    0.699066] tsens_tm_probe: OK
  780. <3>[    0.699371] pm8xxx_init_adc: adc_channel_open() failed.
  781. <3>[    0.699462] pm8xxx_tm_probe: Unable to initialize adc
  782. <4>[    0.699584] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  783. <6>[    0.700103] pm8xxx_tm_probe: OK
  784. <6>[    0.700622] device-mapper: uevent: version 1.0.3
  785. <6>[    0.701049] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  786. <6>[    0.701293] Bluetooth: HCI UART driver ver 2.2
  787. <6>[    0.701446] Bluetooth: HCI H4 protocol initialized
  788. <6>[    0.701538] Bluetooth: HCI_IBS protocol initialized
  789. <6>[    0.701690] Bluetooth: BlueSleep Mode Driver Ver 1.1
  790. <6>[    0.702301] cpuidle: using governor ladder
  791. <6>[    0.702392] cpuidle: using governor menu
  792. <6>[    0.702911] mmc0: mci-version: 0
  793. <3>[    0.703063] mmc0: No card detect facilities available
  794. <6>[    0.703399] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  795. <6>[    0.703582] mmc0: 8 bit data mode enabled
  796. <6>[    0.703735] mmc0: 4 bit data mode disabled
  797. <6>[    0.703857] mmc0: polling status mode disabled
  798. <6>[    0.703948] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  799. <6>[    0.704101] mmc0: Slot eject status = 0
  800. <6>[    0.704223] mmc0: Power save feature enable = 1
  801. <6>[    0.704376] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5dfe0000
  802. <6>[    0.704467] mmc0: DM cmd busaddr 0x5dfe0000, cmdptr busaddr 0x5dff7f40
  803. <6>[    0.704895] mmc1: mci-version: 0
  804. <6>[    0.705871] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  805. <6>[    0.706085] mmc1: 8 bit data mode disabled
  806. <6>[    0.706176] mmc1: 4 bit data mode enabled
  807. <6>[    0.706268] mmc1: polling status mode disabled
  808. <6>[    0.706420] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  809. <6>[    0.706542] mmc1: Slot eject status = 0
  810. <6>[    0.706695] mmc1: Power save`feature enable = 1
  811. <6>[    0.706787] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d800000
  812. <6>[    0.706970] mmc1: DM cmd busaddr 0x5d800000, cmdptr busaddr 0x5d817f40
  813. <6>[    0.707305] mmc2: mci-version: 0
  814. <3>[    0.707550] mmc2: No card detect facilities available
  815. <6>[    0.707855] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  816. <6>[    0.708038] mmc2: 8 bit data mode disabled
  817. <6>[    0.708129] mmc2: 4 bit data mode enabled
  818. <6>[    0.708221] mmc2: polling status mode disabled
  819. <6>[    0.708374] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  820. <6>[    0.708496] mmc2: Slot eject status = 0
  821. <6>[    0.708648] mmc2: Power save feature enable = 1
  822. <6>[    0.708740] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d820000
  823. <6>[    0.708923] mmc2: DM cmd busaddr 0x5d820000, cmdptr busaddr 0x5d837f40
  824. <7>[    0.709594] Registered led device: camera:flash0
  825. <7>[    0.709808] Registered led device: camera:flash1
  826. <6>[    0.711517] usbcore: registered new interface driver usbhid
  827. <6>[    0.711700] usbhid: USB HID core driver
  828. <6>[    0.712158] logger: created 512K log 'log_main'
  829. <6>[    0.712341] logger: created 256K log 'log_events'
  830. <6>[    0.712585] logger: created 512K log 'log_radio'
  831. <6>[    0.712768] logger: created 256K log 'log_system'
  832. <6>[    0.712860] sec_getlog_supply_loggerinfo: 0xc11c52c0 0xc12452c0 0xc12c52c0 0xc13052c0
  833. <6>[    0.714050] zram: Created 2 device(s) ...
  834. <6>[    0.714508] usbcore: registered new interface driver snd-usb-audio
  835. <6>[    0.715393] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  836. <6>[    0.715728] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  837. <6>[    0.716003] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  838. <6>[    0.716949] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  839. <6>[    0.718170] ALSA device list:
  840. <6>[    0.718261]   #0: msm-audio
  841. <6>[    0.718688] oprofile: using arm/armv7-scorpionmp
  842. <6>[    0.719024] GACT probability NOT on
  843. <6>[    0.719116] Mirror/redirect action on
  844. <6>[    0.719207] u32 classifier
  845. <6>[    0.719299]     Actions configured
  846. <6>[    0.719451] Netfilter messages via NETLINK v0.30.
  847. <6>[    0.719635] nf_conntrack version 0.5.0 (12554 buckets, 50216 max)
  848. <6>[    0.720245] ctnetlink v0.93: registering with nfnetlink.
  849. <6>[    0.720397] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  850. <6>[    0.720550] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  851. <6>[    0.721069] xt_time: kernel timezone is -0000
  852. <6>[    0.721405] ip_tables: (C) 2000-2006 Netfilter Core Team
  853. <6>[    0.721771] arp_tables: (C) 2002 David S. Miller
  854. <6>[    0.721984] TCP cubic registered
  855. <6>[    0.722076] Initializing XFRM netlink socket
  856. <6>[    0.722686] NET: Registered protocol family 10
  857. <6>[    0.724670] Mobile IPv6
  858. <6>[    0.724792] ip6_tables: (C) 2000-2006 Netfilter Core Team
  859. <6>[    0.725006] IPv6 over IPv4 tunneling driver
  860. <6>[    0.726104] NET: Registered protocol family 17
  861. <6>[    0.726226] NET: Registered protocol family 15
  862. <6>[    0.726470] Bluetooth: RFCOMM TTY layer initialized
  863. <6>[    0.726654] Bluetooth: RFCOMM socket layer initialized
  864. <6>[    0.726745] Bluetooth: RFCOMM ver 1.11
  865. <6>[    0.726928] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  866. <6>[    0.727020] Bluetooth: BNEP filters: protocol multicast
  867. <6>[    0.727172] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  868. <6>[    0.727416] NET: Registered protocol family 35
  869. <5>[    0.727630] Registering the dns_resolver key type
  870. <6>[    0.727813] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  871. <5>[    0.728088] Registering SWP/SWPB emulation handler
  872. <6>[    0.798553] clock_late_init() disabled 202 unused clocks
  873. <6>[    0.803710] MSM Watchdog Initialized
  874. <3>[    0.804443] set_dload_mode <0> ( C0016B04 )
  875. <4>[    0.805297] [TKEY] touchkey_init START
  876. <6>[    0.805389] is_lpcharging_state: is_lpm_boot:1
  877. <6>[    0.805541] touchkey_init : LPM Charging Mode! return ENODEV!
  878. <6>[    0.806793] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-11-17 00:47:36 UTC (1447721256)
  879. <6>[    0.807128] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  880. <6>[    0.807769] sec_bat_get_lpcharging_state: LP charging:1
  881. <3>[    0.808715] sec_bat_polling_work: adc work already on a ñueue
  882. <3>[    0.810150] [fg] p:9148, s1:97, s2:100, v:4148750, t:0
  883. <4>[    0.810333] ------------[ cut here ]------------
  884. <4>[    0.810516] WARNING: at ../../../../../../kernel/samsung/msm8660/fs/proc/generic.c:586 proc_register+0x150/0x1ac()
  885. <4>[    0.810699] proc_dir_entry '/proc/last_kmsg' already registered
  886. <4>[    0.810791] Modules linked in:
  887. <4>[    0.810974] [<c010a798>] (unwind_backtrace+0x0/0xe0) from [<c018a02c>] (warn_slowpath_common+0x4c/0x64)
  888. <4>[    0.811187] [<c018a02c>] (warn_slowpath_common+0x4c/0x64) from [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c)
  889. <4>[    0.811431] [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0270f80>] (proc_register+0x150/0x1ac)
  890. <4>[    0.811614] [<c0270f80>] (proc_register+0x150/0x1ac) from [<c0271364>] (create_proc_entry+0x70/0x90)
  891. <4>[    0.811798] [<c0271364>] (create_proc_entry+0x70/0x90) from [<c00309b8>] (ram_console_late_init+0x24/0x70)
  892. <4>[    0.811950] [<c00309b8>] (ram_console_late_init+0x24/0x70) from [<c0100408>] (do_one_initcall+0x8c/0x150)
  893. <4>[    0.812133] [<c0100408>] (do_one_initcall+0x8c/0x150) from [<c00089b8>] (kernel_init+0x9c/0x144)
  894. <4>[    0.812316] [<c00089b8>] (kernel_init+0x9c/0x144) from [<c0105bfc>] (kernel_thread_exit+0x0/0x8)
  895. <4>[    0.812500] ---[ end trace e018a583880f6e2a ]---
  896. <4>[    0.812744] Warning: unable to open an initial console.
  897. <6>[    0.813140] Freeing init memory: 272K
  898. <5>[    0.815277] init: init started!
  899. <3>[    0.816406] SELinux:  policydb version 30 does not match my version range 15-26
  900. <3>[    0.816741] init: SELinux:  Could not load policy:  Invalid argument
  901. <3>[    0.817016] init: failed to load policy: Invalid argument
  902. <3>[    0.817138] init: Security failure; rebooting into recovery mode...
  903. <6>[    0.817382] SysRq : Emergency Remount R/O
  904. <4>[    0.817596] Emergency Remount complete
  905. 40>[    0.818023] (sec_debug_set_upload_magic) 0
  906. <3>[    0.818267] set_dload_mode <0> ( C01741C4 )
  907. <6>[    0.818969] pn544_shutdown
  908. <4>[    0.819549] ld9040 start ld9040_shutdown
  909. <4>[    0.819732] ld9040 lcdc_ld9040_panel_off +  (0,0,0)
  910. <4>[    0.819824] ld9040 lcdc_ld9040_panel_off -
  911. <6>[    0.821014] mmc0: new high speed MMC card at address 0001
  912. <6>[    0.821044] disable_charging_before_reset: check voltage(4148750)
  913. <4>[    0.821258] Disabling non-boot CPUs ...
  914. <4>[    0.821380] set_freq_limit: 0x8 0, min 384000, max 1242000
  915. <6>[    0.823059] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  916. <6>[    0.823364] mmcblk0boot0: mmc080001 KYL00M partition 1 512 KiB
  917. <6>[    0.823577] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  918. [0] ========================================
  919. [0] welcome to lk
  920. [0] Original Log Magic = 0x4d474f4c
  921. [0] calling constructors
  922. [0] initializing heap
  923. [0] initializing threads
  924. [0] initializing dpc
  925. [0] initializing timers
  926. [0] creating bootstrap completion thread
  927. [0] creating bootstrap progress monitor thread
  928. [10] top of bootstrap3()
  929. [10] top of bootstrap2()
  930. [10] initializing platform
  931. [10] initializing target
  932. [400] calling apps_init()
  933. [400] aboot_init()
  934. [400] aboot_banner()
  935. [420] power on reason = 0x100, msm watchdog status = 0x4
  936. [620] aboot_check_rtc_alarm_boot()
  937. [620] aboot_dev_init()
  938. [620] init_microusb_ic()
  939. [0] ========================================
  940. [0] welcome to lk
  941. [0] Original Log Magic = 0x4d474f4c
  942. [0] calling constructors
  943. [0] initializing heap
  944. [0] initializing threads
  945. [0] initializing dpc
  946. [0] initializing timers
  947. [0] creating bootstrap completion thread
  948. [0] creating bootstrap progress monitor thread
  949. [10] top of bootstrap3()
  950. [10] top of bootstrap2()
  951. [10] initializing platform
  952. [10] initializing target
  953. [390] calling apps_init()
  954. [400] aboot_init()
  955. [400] aboot_banner()
  956. [420] power on reason = 0x100, msm watchdog status = 0x4
  957. [620] aboot_check_rtc_alarm_boot()
  958. [620] aboot_dev_init()
  959. [620] init_microusb_ic()
  960. [1420] init_microusb_ic success1
  961. [1420] init_microusb_ic success2
  962. [1420] smb328a_init_charger : log(1)
  963. [1420] smb328a_init_charger : log(2)
  964. [1430] smb328a_init_charger : is_reboot_mode = 0, vcell = 4185
  965. [1430] check valid dcin (0x33) = 0x2
  966. [1440] start_charging : state(1), value(0x2d)
  967. [1440] smb328a_allow_volatile_writes : (0x31) = 0xad
  968. [1460] start_charging : state(1), value(0x2d)
  969. [1460] REG(0x31) = 0x2d
  970. [1460] REG(0x0) = 0x17
  971. [1470] REG(0x1) = 0x4
  972. [1470] REG(0x2) = 0xca
  973. [1470] REG(0x3) = 0x1a
  974. [1470] REG(0x4) = 0x4e
  975. [1480] REG(0x5) = 0x88
  976. [1480] REG(0x6) = 0x55
  977. [1480] REG(0x7) = 0xf6
  978. [1480] REG(0x8) = 0x0
  979. [1490] REG(0x9) = 0x0
  980. [1490] REG(0x32) = 0x0
  981. [1490] REG(0x33) = 0x2
  982. [1490] REG(0x34) = 0x0
  983. [1500] REG(0x35) = 0x0
  984. [1500] REG(0x36) = 0x5
  985. [1500] REG(0x37) = 0x0
  986. [1500] REG(0x38) = 0x30
  987. [1510] REG(0x39) = 0x0
  988. [1510] battery pole check!
  989. [1520] fuelguage : soc = 91%, vcell = 4181mV
  990. [1530] fuelguage : rcomp(c71f) ==?? 0xc71f
  991. [1540] 9896 = ( 418100 - 341495 ) * 12919 / 100000
  992. [2070] HW_REV = 0xd
  993. [2070] reboot_mode = 0x86d86549
  994. [2070] debuglevel = 0x574f4c44
  995. [2070] do key check
  996. [2070] aboot_check_lpm : rb = 0, chg = 2, av = 0
  997. [2080] check valid dcin (0x33) = 0x2
  998. [2080] set lpm_mode
  999. [2080] get mpp11 state (2) = 0
  1000. [3610] enter lpm booting mode
  1001. [3610] boot_linux_from_mmc()
  1002. [4440] kernel  @ 40408000 (3918016 bytes)
  1003. [4440] ramdisk @ 41800000 (974717 bytes)
  1004. [4440] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13'
  1005. [4450] Booting Linux
  1006. [4450] boot_linUx()
  1007. [4470] booting linux @ 0x40408000, ramdisk @ 0x41800000 (974717)
  1008. [4470] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13
  1009. [4470] entry()
  1010. <6>[    0.383392] sec_log_save_old: saved old log at 112919@de160000
  1011. <6>[    0.000000] [0:        swapper:    0] Booting Linux on physical CPU 0
  1012. <6>[    0.000000] [0:        swapper:    0] Initializing cgroup subsys cpu
  1013. <5>[    0.000000] [0:        swapper:    0] Linux version 3.0.101-slim-gaf5480c (nospamdan@bacon) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Nov 16 21:32:41 CET 2015
  1014. <4>[    0.000000] [0:        swapper:    0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  1015. <4>[    0.000000] [0:        swapper:    0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  1016. <4>[    0.000000] [0:        swapper:    0] Machine: QCT MSM8X60 FUSION FFA
  1017. <6>[    0.000000] [0:        swapper:    0] memory pool 0 (start 38000000 size 600000) initialized
  1018. <6>[    0.000000] [0:        swapper:    0] memory pool 1 (start 38600000 size 3802000) initialized
  1019. <6>[    0.000000] [0:        swapper:    0] memory pool 3 (start 78f00000 size 7100000) initialized
  1020. <4>[    0.000000] [0:        swapper:    0] Memory policy: ECC disabled, Data cache writealloc
  1021. <6>[    0.000000] [0:        swapper:    0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0,  hw_plat_ver=65536
  1022. <6>[    0.000000] [0:        swapper:    0]  accessory_chip=0 hw_plat_subtype=0
  1023. <6>[    0.000000] [0:        swapper:    0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  1024. <7>[    0.000000] [0:        swapper:    0] On node 0 totalpages: 211200
  1025. <7>[    0.000000] [0:        swapper:    0] free_area_init_node: node 0, pgdat c0cef9a0, node_mem_map c14ee000
  1026. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 992 pages used for memmap
  1027. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 0 pages reserved
  1028. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 105248 pages, LIFO batch:31
  1029. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 1048 pages used for memmap
  1030. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 103912 pages, LIFO batch:31
  1031. <6>[    0.000000] [0:        swapper:    0] allocating 12906496 bytes at c1cf0000 (420f0000 physical) for fb
  1032. <6>[    0.000000] [0:        swapper:    0] PERCPU: Embedded 8 pages/cpu @c2942000 s9888 r8192 d14688 u32768
  1033. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: s9888 r8192 d14688 u32768 alloc=8*4096
  1034. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: [0] 0 [0] 1
  1035. <4>[    0.000000] [0:        swapper:    0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 209160
  1036. <5>[    0.000000] [0:        swapper:    0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=f3ae2762 androidboot.baseband=csfb
  1037. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup)
  1038. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  1039. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  1040. <4>[    0.000000] hw_rev_setup : HW rev value is intialized first
  1041. <4>[    0.000000] HW rev value : 0xD
  1042. <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  1043. <6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  1044. <6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  1045. <6>[    0.000000] Memory: 43MB 760MB 22MB = 825MB total
  1046. <5>[    0.000000] Memory: 802516k/802516k available, 159020k reserved, 419840K highmem
  1047. <5>[    0.000000] Virtual kernel memory layout:
  1048. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  1049. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  1050. <5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  1051. <5>[    0.000000]     vmalloc : 0xdf800000 - 0xfa000000   ( 424 MB)
  1052. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
  1053. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  1054. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  1055. <5>[    0.000000]       .init : 0xc0008000 - 0xc004c000   ( 272 kB)
  1056. <5>[    0.000000]       .text : 0xc0100000 - 0xc0b78208   (10721 kB)
  1057. <5>[    0.000000]       .data : 0xc0c00000 - 0xc0cf2488   ( 970 kB)
  1058. <5>[    0.000000]        .bss : 0xc0cf24ac - 0xc1351ee8   (6527 kB)
  1059. <6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  1060. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  1061. <6>[    0.000000] NR_IRQS:855
  1062. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  1063. <6>[    0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67656)
  1064. <6>[    0.150238] pid_max: default: 32768 minimum: 301
  1065. <6>[    0.150573] Security Framework initialized
  1066. <6>[    0.150604] SELinux:  Initializing.
  1067. <7>[    0.150665] SELinux:  Starting in permissive mode
  1068. <6>[    0.150848] Mount-cache hash table entries: 512
  1069. <6>[    0.152191] Initializing cgroup subsys cpuacct
  1070. <6>[    0.152282] Initializing cgroup subsys freezer
  1071. <6>[    0.152343] CPU: Testing write buffer coherency: ok
  1072. <6>[    0.152709] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  1073. <4>[    0.185302] CPU1: Booted secondary processor
  1074. <6>[    0.195159] Brought up 2 CPUs
  1075. <6>[    0.195159] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  1076. <6>[    0.210174] print_constraints: dummy:
  1077. <3>[    0.210266] rdev_init_debugfs: Error-Bad Function Input
  1078. <6>[    0.210601] NET: Registered protocol family 16
  1079. <3>[    0.210815] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  1080. <6>[    0.212860] (sec_get_lpm_mode) 1a2b3c10
  1081. <0>[    0.212890] (sec_get_lpm_mode) 1
  1082. <0>[    0.2128¹0] (sec_debug_init)
  1083. <0>[    0.212921] (sec_debug_init) reset_reason : 0x1a2b3c10
  1084. <6>[    0.212921] msm_rpm_init: RPM firmware 2.0.4196187
  1085. <6>[    0.213714] saw_probe: id=0, name=8901_s0
  1086. <6>[    0.214141] saw_probe: id=1, name=8901_s1
  1087. <6>[    0.215789] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  1088. <6>[    0.215850] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  1089. <6>[    0.215881] rcg_clk_handoff: sdc1_clk rate=48000000
  1090. <6>[    0.215942] rcg_clk_handoff: dsi_byte_clk rate=1
  1091. <6>[    0.216003] rcg_clk_handoff: mdp_clk rate=200000000
  1092. <6>[    0.216094] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  1093. <6>[    0.218139] Max ACPU freq: 1512000 KHz
  1094. <6>[    0.223968] CPU0: 23 scaling frequencies supported.
  1095. <6>[    0.223968] CPU1: 23 scaling frequencies supported.
  1096. <6>[    0.224212] msm8x60_init_mmc : skip sdcc2 config for lpm boot
  1097. <6>[    0.224334] msm8x60_init_mmc : skip sdcc5 config for lpm boot
  1098. <3>[    0.224365] LTE_switch_init!
  1099. <3>[    0.224426] LTE_switch_init end!
  1100. <6>[    0.225860] pm8058_probe: PMIC revision: E3
  1101. <6>[    0.227172] pm_gpio_probe: OK: base=173, ngpio=40
  1102. <6>[    0.227386] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  1103. <6>[    0.228729] pm8901_probe: PMIC REVISION = F4
  1104. <6>[    0.229156] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  1105. <6>[    0.243988] ram_console: got buffer at 77800000, size 100000
  1106. <6>[    0.244140] ram_console: uncorrectable error in header
  1107. <6>[    0.244140] ram_console: no valid data in buffer (sig = 0x42474244)
  1108. <6>[    0.253356] console [ram-1] enabled
  1109. <6>[    0.253814] msm8x60_init : skip charm devices for lpm boot
  1110. <3>[    0.254760] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  1111. <4>[    0.255371] tsp_power_init: MXT224 Power On skipped by LPM
  1112. <4>[    0.255493] brcm_wlan_init: start
  1113. <4>[    0.255645] brcm_init_wlan_mem: WIFI MEM Allocated
  1114. <6>[    0.274017] bio: create slab <bio-0> at 0
  1115. <6>[    0.275360] ION heap vmalloc created
  1116. <6>[    0.275482] ION heap mm created at 38800000 with size 3600000
  1117. <6>[    0.275634] ION heap mm_fw created at 38600000 with size 200000
  1118. <6>[    0.275756] ION heap mfc created at 3be00000 with size 2000
  1119. <6>[    0.275939] ION heap sf created at 78f00000 with size 4000000
  1120. <6>[    0.276031] ION heap camera_preview created at 7cf00000 with size 1200000
  1121. <6>[    0.276214] ION heap wb created at 7e100000 with size 1400000
  1122. <6>[    0.276336] ION heap qsecom created at 7f500000 with size 600000
  1123. <6>[    0.276489] ION heap audio created at 7fb00000 with size 4cf000
  1124. <5>[    0.276672] pmic8058_pwm_probe: OK
  1125. <5>[    0.277282] SCSI subsystem initialized
  1126. <6>[    0.277557] usbcore: registered new interface driver usbfs
  1127. <6>[    0.277679] usbcore: registered new interface driver hub
  1128. <6>[    0.277954] usbcore: registered new device driver usb
  1129. <6>[    0.278442] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  1130. <6>[    0.278747] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  1131. <6>[    0.278991] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  1132. <6>[    0.279296] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  1133. <6>[    0.279602] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  1134. <6>[    0.279907] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  1135. <6>[    0.280212] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  1136. <6>[    0.280456] Advanced Linux Sound Architecture Driver Version 1.0.24.
  1137. <6>[    0.281036] Bluetooth: Core ver 2.16
  1138. <6>[    0.281158] NET: Registered protocol family 31
  1139. <6>[    0.281250] Bluetooth: HCI device and connection manager initialized
  1140. <6>[    0.281402] Bluetooth: HCI socket layer initialized
  1141. <6>[    0.281463] Bluetooth: L2CAP socket layer initialized
  1142. <6>[    0.281768] Bluetooth: SCO socket layer initialized
  1143. <6>[    0.282226] cfg80211: Calling CRDA to update world regulatory domain
  1144. <6>[    0.282562] Switching to clocksource gp_timer
  1145. <6>[    0.301483] NET: Registered protocol family 2
  1146. <6>[    0.301757] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  1147. <6>[    0.302154] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  1148. <6>[    0.303100] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  1149. <6>[    0.304107] TCP: Hash tables configured (established 65536 bind 65536)
  1150. <6>[    0.304260] TCP reno registered
  1151. <6>[    0.304351] UDP hash table entries: 256 (order: 1, 12288 bytes)
  1152. <6>[    0.304504] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  1153. <6>[    0.304962] NET: Registered protocol family 1
  1154. <6>[    0.305389] RPC: Registered named UNIX sockat transport module.
  1155. <6>[    0.305480] RPC: Registered udp transport module.
  1156. <6>[    0.305633] RPC: Registered tcp transport module.
  1157. <6>[    0.305694] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1158. <6>[    0.306060] Trying to unpack rootfs image as initramfs...
  1159. <6>[    0.346069] Freeing initrd memory: 948K
  1160. <6>[    0.346405] PMU: registered new PMU device of type 0
  1161. <6>[    0.346618] PMU: registered new PMU device of type 1
  1162. <6>[    0.347076] ETM/ETB intialized.
  1163. <6>[    0.347351] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  1164. <6>[    0.347717] pil_modem pil_modem: using secure boot
  1165. <6>[    0.347961] sdio_al:SDIO-AL SW version 1.30
  1166. <3>[    0.350128] smd_channel_probe_worker: allocation table not initialized
  1167. <6>[    0.354400] msm_dsps driver version 3.03.
  1168. <6>[    0.357116] lpa_if_init: lpa_if_ptr 0xde9c8e00   buf_vir 0xffdf0000   buf_phy 0x5e590000  buf_zise 65536
  1169. <3>[    0.359069] sec_switch_probe enter sec_switch_probe
  1170. <5>[    0.360961] msm_rpm_log_probe: OK
  1171. <3>[    0.361114] [BT] bcm4330_bluetooth_init
  1172. <3>[    0.361572] [BT] bcm4330_bluetooth_probe
  1173. <3>[    0.361846] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  1174. <3>[    0.361999] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  1175. <6>[    0.383392] sec_log_save_old: saved old log at 112919@de160000
  1176. <6>[    0.387603] sec_getlog_supply_kloginfo: 0xc112a518
  1177. <6>[    0.387908] audit: initializing netlink socket (disabled)
  1178. <5>[    0.388031] type=2000 audit(0.340:1): initialized
  1179. <4>[    0.473083] highmem bounce pool size: 64 pages
  1180. <6>[    0.473419] ashmem: initialized
  1181. <6>[    0.479309] exFAT: Core Version 1.2.4
  1182. <6>[    0.479400] exFAT: FS Version 1.2.4
  1183. <6>[    0.481353] NTFS driver 2.1.30 [Flags: R/W].
  1184. <6>[    0.481719] fuse init (API version 7.16)
  1185. <6>[    0.482391] msgmni has been set to 749
  1186. <7>[    0.482574] SELinux:  Registering netfilter hooks
  1187. <6>[    0.484588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  1188. <6>[    0.484771] io scheduler noop registered
  1189. <6>[    0.484863] io scheduler deadline registered (default)
  1190. <6>[    0.485046] io scheduler row registered
  1191. <6>[    0.485168] io scheduler cfq registered
  1192. <4>[    0.487457] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1193. <4>[    0.487640] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1194. <4>[    0.491455] ld9040 start lcdc_ld9040_panel_init
  1195. <4>[    0.491668] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  1196. <4>[    0.491790] ld9040 msm_fb_add_device START
  1197. <6>[    0.491943] setting pdata->panel_info.fb_num to 3. type: 0
  1198. <3>[    0.492034] msm_fb_add_device: msm_fb_device_alloc failed!
  1199. <4>[    0.492218] ld9040 msm_fb_add_device end
  1200. <4>[    0.492614] ld9040 platform_driver_register(&this_driver) is done
  1201. <4>[    0.492797] ld9040 LDI : EA8868, pixelclock 27400000
  1202. <6>[    0.493164] setting pdata->panel_info.fb_num to 3. type: 3
  1203. <6>[    0.495971] mdp4_lcdc_vsync_init: ndx=0
  1204. <6>[    0.498229] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  1205. <6>[    0.498352] is_lpcharging_state: is_lpm_boot:1
  1206. <6>[    0.498443] [lpm-mode] skip init logo!
  1207. <7>[    0.498870] Registered led device: lcd-backlight
  1208. <6>[    0.499053] mdp4_lcdc_vsync_init: ndx=0
  1209. <6>[    0.499176] sec_getlog_supply_fbinfo: 0x420f0000 480 800 32 2
  1210. <4>[    0.499298] ld9040 platform_device_register(&this_device) is done
  1211. <6>[    0.499877] hdmi_msm hdmi_msm.0: probe
  1212. <6>[    0.500305] hdmi_msm hdmi_msm.1: probe
  1213. <6>[    0.500488] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  1214. <6>[    0.500671] setting pdata->panel_info.fb_num to 1. type: 7
  1215. <6>[    0.501525] mdp4_dtv_vsync_init: ndx=0
  1216. <6>[    0.503753] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  1217. <6>[    0.504211] mdp4_dtv_vsync_init: ndx=0
  1218. <6>[    0.504425] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de18dc08
  1219. <6>[    0.504608] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  1220. <6>[    0.504791] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  1221. <7>[    0.505065] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  1222. <6>[    0.506103]
  1223. <6>[    0.506103]  msm_vidc_enc: Inside vid_enc_init()
  1224. <6>[    0.506469]
  1225. <6>[    0.506500]  msm_vidc_enc: Inside vid_enc_vcd_init()
  1226. <6>[    0.506805] is_lpcharging_state: is_lpm_boot:1
  1227. <6>[    0.506958] sii9234_init : LPM Charging Mode! return 0
  1228. <6>[    0.507476] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  1229. <6>[    0.507812] msm_serial_hs module loaded
  1230. <6>[    0.508056] msm_serial_hsl: detected port #1
  1231. <6>[    0.508209] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  1232. <6>[    0.508575] msm_serial_hsl: detected port #0
  1233. <6>[    0.508728] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  1234. <6>[    0.509155] msm_serial_hsl: driver initialized
  1235. <6>[    0.510253] msm_rotator_probe: rotator_hw_revision=1
  1236. <6>[    0.515869] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1237. <6>[    0.517211] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1238. <6>[    0.518310] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1239. <6>[    0.524383] brd: module loaded
  1240. <6>[    0.527130] loop: module loaded
  1241. <6>[    0.527465] is_lpcharging_state: is_lpm_boot:1
  1242. <6>[    0.527587] akm8975_init : LPM Charging Mode! return 0
  1243. <6>[    0.527740] is_lpcharging_state: is_lpm_boot:1
  1244. <6>[    0.527832] k3dh_init : LPM Charging Mode! return 0
  1245. <6>[    0&528106] sec_jack:sec_jack_probe : Registering jack driver
  1246. <6>[    0.528350] input: sec_jack as /devices/virtual/input/input0
  1247. <5>[    0.529296] pm8xxx_upl_probe: OK
  1248. <3>[    0.530151] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  1249. <4>[    0.530578] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  1250. <4>[    0.530914] THNAK YOU!!
  1251. <6>[    0.531066] vibrator I2C attach success!!!
  1252. <4>[    0.531280] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  1253. <4>[    0.545104] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  1254. <6>[    0.546020] is_lpcharging_state: is_lpm_boot:1
  1255. <6>[    0.546112] a2220_init : LPM Charging Mode! return 0
  1256. <4>[    0.546356] level device init
  1257. <6>[    0.551422] adie_codec_register_codec_operations: codec type 1
  1258. <6>[    0.551971] Loading pn544 driver
  1259. <6>[    0.552093] pn544_probe : IRQ num 628
  1260. <6>[    0.552368] pn544_probe : requesting IRQ 628
  1261. <6>[    0.553192] SCSI Media Changer driver v0.25
  1262. <6>[    0.553619] PPP generic driver version 2.4.2
  1263. <6>[    0.553833] PPP Deflate Compression module registered
  1264. <6>[    0.553955] PPP BSD Compression module registered
  1265. <6>[    0.554687] PPP MPPE Compression module registered
  1266. <6>[    0.554779] NET: Registered protocol family 24
  1267. <6>[    0.554962] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  1268. <6>[    0.555084] CSLIP: code copyright 1989 Regents of the University of California.
  1269. <6>[    0.555633] tun: Universal TUN/TAP device driver, 1.6
  1270. <6>[    0.555816] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1271. <6>[    0.556427] smsc911x: Driver version 2008-10-21
  1272. <6>[    0.556701] usbcore: registered new interface driver asix
  1273. <6>[    0.556915] usbcore: registered new interface driver cdc_ether
  1274. <6>[    0.557037] usbcore: registered new interface driver net1080
  1275. <6>[    0.557220] usbcore: registered new interface driver cdc_subset
  1276. <6>[    0.557373] usbcore: registered new interface driver zaurus
  1277. <6>[    0.557556] cdc_ncm: 04-Aug-2011
  1278. <6>[    0.557678] usbcore: registered new interface driver cdc_ncm
  1279. <6>[    0.557830] rmnet_init: SMD devices[8]
  1280. <6>[    0.561401] rmnet_init: SDIO devices[8]
  1281. <3>[    0.564239] msm_hsusb_smb328a_vbus_power attached 0
  1282. <6>[    0.566436] msm_otg msm_otg: success to host_notify_dev_register
  1283. <6>[    0.566619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1284. <6>[    0.567047] host driver registered w/ tranceiver
  1285. <6>[    0.567260] usbcore: registered new interface driver cdc_acm
  1286. <6>[    0.567413] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1287. <6>[    0.567626] usbcore: registered new interface driver usblp
  1288. <6>[    0.567749] Initializing USB Mass Storage driver...
  1289. <6>[    0.567871] usbcore: registered new interface driver usb-storage
  1290. <6>[    0.568054] USB Mass Storage support registered.
  1291. <6>[    0.568176] usbcore: registered new interface driver ums-alauda
  1292. <6>[    0.568389] usbcore: registered new interface driver ums-cypress
  1293. <6>[    0.568511] usbcore: registered new interface driver ums-datafab
  1294. <6>[    0.568725] usbcore: registered new interface driver ums-freecom
  1295. <6>[    0.568908] usbcore: registered new interface driver ums-isd200
  1296. <6>[    0.569061] usbcore: registered new interface driver ums-jumpshot
  1297. <6>[    0.569244] usbcore: registered new interface driver ums-karma
  1298. <6>[    0.569396] usbcore: registered new interface driver ums-onetouch
  1299. <6>[    0.569610] usbcore: registered new interface driver ums-sddr09
  1300. <6>[    0.569732] usbcore: registered new interface drivEr ums-sddr55
  1301. <6>[    0.569946] usbcore: registered new interface driver ums-usbat
  1302. <6>[    0.570068] usbcore: registered new interface driver usb_ehset_test
  1303. <6>[    0.570495] peripheral driver registered w/ tranceiver
  1304. <4>[    0.570648] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  1305. <6>[    0.572570] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1306. <6>[    0.572692] android_usb gadget: Number of LUNs=2
  1307. <6>[    0.572875]  lun0: LUN: removable file: (no medium)
  1308. <6>[    0.572998]  lun1: LUN: removable file: (no medium)
  1309. <6>[    0.573364] android_usb gadget: android_usb ready
  1310. <6>[    0.574707] DIAG registered SDIO device
  1311. <6>[    0.574951] diagchar initialized now
  1312. <6>[    0.575347] mousedev: PS/2 mouse device common for all mice
  1313. <6>[    0.576568] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input1
  1314. <6>[    0.577148] is_lpcharging_state: is_lpm_boot:1
  1315. <6>[    0.577239] mxt224_init : LPM Charging Mode! return ENODEV!
  1316. <6>[    0.577667] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input2
  1317. <6>[    0.577911] [sweep2wake]: set device pmic8xxx_pwrkey
  1318. <6>[    0.579254] using rtc device, pm8xxx_rtc, for alarms
  1319. <6>[    0.579467] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  1320. <6>[    0.579833] i2c /dev entries driver
  1321. <6>[    0.581237] is_lpcharging_state: is_lpm_boot:1
  1322. <6>[    0.581420] yda165_init : LPM Charging Mode! return 0
  1323. <6>[    0.581512] is_lpcharging_state: is_lpm_boot:1
  1324. <6>[    0.581665] gp2a_opt_init : LPM Charging Mode! return 0
  1325. <6>[    0.581756] is_lpcharging_state: is_lpm_boot:1
  1326. <6>[    0.581939] lightsensor_init : LPM Charging Mode! return 0
  1327. <6>[    0.582214] input: fsa9480 as /devices/i2c-5/5-0025/input/input3
  1328. <6>[    0.585021] fsa9480 5-0025:  fsa9480_reg_init dev ID: 0x0
  1329. <4>[    0.585266] i2c-core: driver [fsa9480] using legacy resume method
  1330. <6>[    0.585449] is_lpcharging_state: is_lpm_boot:1
  1331. <6>[    0.585540] k3g_init : LPM Charging Mode! return 0
  1332. <6>[    0.586212] input: orientation_sensor as /devices/virtual/input/input4
  1333. <6>[    0.586608] lirc_dev: IR Remote Control driver registered, major 239
  1334. <6>[    0.586791] IR NEC protocol handler initialized
  1335. <6>[    0.586883] IR RC5(x) protocol handler initialized
  1336. <6>[    0.586975] IR RC6 protocol handler initialized
  1337. <6>[    0.587127] IR JVC protocol handler initialized
  1338. <6>[    0.587249] IR Sony protocol handler initialized
  1339. <6>[    0.587402] IR RC5 (streamzap) protocol handler initialized
  1340. <6>[    0.587493] IR LIRC bridge handler initialized
  1341. <6>[    0.587585] Linux video capture interface: v2.00
  1342. <6>[    0.587860] usbcore: registered new interface driver uvcvideo
  1343. <6>[    0.587951] USB Video Class driver (v1.1.0)
  1344. <6>[    0.588653] is_lpcharging_state: is_lpm_boot:1
  1345. <6>[    0.588745] sec_m5mo_init : LPM Charging Mode! return 0
  1346. <6>[    0.588928] is_lpcharging_state: is_lpm_boot:1
  1347. <6>[    0.589019] sec_s5k5bafx_camera_init : LPM Charging Mode! return 0
  1348. 4>[    0.589172] [Torch] ledflash_init
  1349. <6>[    0.589447] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  1350. <6>[    0.589782] max17040_probe: MAX17043 driver Loading!
  1351. <6>[    0.589935] max17040_get_version :
  1352. <6>[    0.590759] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  1353. <6>[    0.591644] max17040_get_rcomp : current rcomp = 0xc71f(199)
  1354. <6>[    0.592834] max17040_get_rcomp : current rcomp = 0xc71f(199)
  1355. <4>[    0.596374] i2c-core: driver [max17040] using legacy suspend method
  1356. <4>[    0.596496] i2c-core: driver [max17040] using legacy resume method
  1357. <6>[    0.596740] smb328a_probe: SMB328A driver Loading!
  1358. <6>[    0.596832] is_lpcharging_state: is_lpm_boot:1
  1359. <6>[    0.596984] smb328a_probe : is lpm charging mode (1)
  1360. <6>[    0.598266] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  1361. <6>[    0.599945] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  1362. <4>[    0.600524] i2c-core: driver [smb328a] using legacy suspend method
  1363. <4>[    0.600677] i2c-core: driver [smb328a] using legacy resume method
  1364. <6>[    0.601257] msm_adc successfully registered
  1365. <5>[    0.612976] tsens_tm_probe: OK
  1366. <3>[    0.613220] pm8xxx_init_adc: adc_channel_open() failed.
  1367. <3>[    0.613311] pm8xxx_tm_probe: Unable to initialize adc
  1368. <4>[    0.613494] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  1369. <6>[    0.613952] pm8xxx_tm_probe: OK
  1370. <6>[    0.614532] device-mapper: uevent: version 1.0.3
  1371. <6>[    0.614898] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  1372. <6>[    0.615203] Bluetooth: HCI UART driver ver 2.2
  1373. <6>[    0.615295] Bluetooth: HCI H4 protocol initialized
  1374. <6>[    0.615478] Bluetooth: HCI_IBS protocol initialized
  1375. <6>[    0.615570] Bluetooth: BlueSleep Mode Driver Ver 1.1
  1376. <6>[    0.616149] cpuidle: using governor ladder
  1377. <6>[    0.616333] cpuidle: using governor menu
  1378. <6>[    0.616760] mmc0: mci-version: 0
  1379. <3>[    0.616943] mmc0: No card detect facilities available
  1380. <6>[    0.617309] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  1381. <6>[    0.617492] mmc0: 8 bit data mode enabled
  1382. <6>[    0.617614] mmc0: 4 bit data mode disabled
  1383. <6>[    0.617706] mmc0: polling status mode disabled
  1384. <6>[    0.617858] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  1385. <6>[    0.617980] mmc0: Slot eject status = 0
  1386. <6>[    0.618133] mmc0: Power save feature enable = 1
  1387. <6>[    0.618225] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d800000
  1388. <6>[    0.618408] mmc0: DM cmd busaddr 0x5d800000, cmdptr busaddr 0x5d817f40
  1389. <6>[    0.618743] mmc1: mci-version: 0
  1390. <6>[    0.619720] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  1391. <6>[    0.619934] mmc1: 8 bit data mode disabled
  1392. <6>[    0.620086] mmc1: 4 bit data mode enabled
  1393. <6>[    0.620178] mmc1: polling status mode disabled
  1394. <6>[    0.620300] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  1395. <6>[    0.620452] mmc1: Slot eject status = 0
  1396. <6>[    0.620544] mmc1: Power save feature enable = 1
  1397. <6>[    0.620697] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d820000
  1398. <6>[    0.620819] mmc1: DM cmd busaddr 0x5d820000, cmdptr busaddr 0x5d837f40
  1399. <6>[    0.621215] mmc2: mci-version: 0
  1400. <3>[    0.621398] mmc2: No card detect facilities available
  1401. <6>[    0.621704] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  1402. <6>[    0.621887] mmc2: 8 bit data mode disabled
  1403. <6>[    0.621978] mmc2: 4 bit data mode enabled
  1404. <6>[    0.622070] mmc2: polling status mode disabled
  1405. <6>[    0.622161] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  1406. <6>[    0.622344] mmc2: Slot eject status = 0
  1407. <6>[    0.622436] mmc2: Power save feature enable = 1
  1408. <6>[    0.622528] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d840000
  1409. <6>[    0.622711] mmc2: DM cmd busaddr 0x5d840000, cmdptr busaddr 0x5d857f40
  1410. <7>[    0.623474] Registered led device: camera:flash0
  1411. <7>[    0.623626] Registered led device: camera:flash1
  1412. <6>[    0.625335] usbcore: registered new interface driver usbhid
  1413. <6>[    0.625518] usbhid: USB HID core driver
  1414. <6>[    0.625976] logger: created 512K log 'log_main'
  1415. <6>[    0.626220] logger: created 256K log 'log_events'
  1416. <6>[    0.626373] logger: created 512K log 'log_radio'
  1417. <6>[    0.626556] logger: created 256K log 'log_system'
  1418. <6>[    0.626678] sec_getlog_supply_loggerinfo: 0xc11c52c0 0xc12452c0 0xc12c52c0 0xc13052c0
  1419. <6>[    0.627868] zram: Created 2 device(s) ...
  1420. <6>[    0.628265] usbcore: registered new interface driver snd-usb-audio
  1421. <6>[    0.629211] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  1422. <6>[    0.629486] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  1423. <6>[    0.629821] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  1424. <6>[    0.630737] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  1425. <6>[    0.631896] ALSA device list:
  1426. <6>[    0.632019]   #0: msm-audio
  1427. <6>[    0.632507] oprofile: using arm/armv7-scorpionmp
  1428. <6>[    0.632720] GACT probability NOT on
  1429. <6>[    0.632843] Mirror/redirect action on
  1430. <6>[    0.633026] u32 classifier
  1431. <6>[    0.633117]     Actions configured
  1432. <6>[    0.633209] Netfilter messages via NETLINK v0.30.
  1433. <6>[    0.633422] nf_conntrack version 0.5.0 (12554 buckets, 50216 max)
  1434. <6>[    0.633972] ctnetlink v0.93: registering with nfnetlink.
  1435. <6>[    0.634216] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  1436. <6>[    0.634307] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  1437. <6>[    0.634887] xt_time: kernel timezone is -0000
  1438. <6>[    0.635162] ip_tables: (C) 2000-2006 Netfilter Core Team
  1439. <6>[    0.635559] arp_tables: (C) 2002 David S. Miller
  1440. <6>[    0.635711] TCP cubic registered
  1441. <6>[    0.635803] Initializing XFRM netlink socket
  1442. <6>[    0.636505] NET: Registered protocol family 10
  1443. <6>[    0.638397] Mobile IPv6
  1444. <6>[    0.638519] ip6_tables: (C) 2000-2006 Netfilter Core Team
  1445. <6>[    0.638824] IPv6 over IPv4 tunneling driver
  1446. <6>[    0.639831] NET: Registered protocol family 17
  1447. <6>[    0.639953] NET: Registered protocol family 15
  1448. <6>[    0.640258] Bluetooth: RFCOMM TTY layer initialized
  1449. <6>[    0.640380] Bluetooth: RFCOMM socket layer initialized
  1450. <6>[    0.640533] Bluetooth: RFCOMM ver 1.11
  1451. <6>[    0.640655] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  1452. <6>[    0.640808] Bluetooth: BNEP filters: protocol multicast
  1453. <6>[    0.640899] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  1454. <6>[    0.641143] NET: Registered protocol family 35
  1455. <5>[    0.641418] Registering the dns_resolver key type
  1456. <6>[    0.641540] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  1457. <5>[    0.641815] Registering SWP/SWPB emulation handler
  1458. <6>[    0.712249] clock_late_init() disabled 202 unused clocks
  1459. <6>[    0.717529] MSM Watchdog Initialized
  1460. <3>[    0.718231] set_dload_mode <0> ( C0016B04 )
  1461. <4>[    0.719146] [TKEY] touchkey_init START
  1462. <6>[    0.719238] is_lpcharging_state: is_lpm_boot:1
  1463. <6>[    0.719329] touchkey_init : LPM Charging Mode! return ENODEV!
  1464. <6>[    0.720611] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-11-17 00:48:01 UTC (1447721281)
  1465. <6>[    0.720947] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  1466. <6>[    0.721527] sec_bat_get_lpcharging_state: LP charging:1
  1467. <3>[    0.722534] sec_bat_polling_work: adc work already on a queue
  1468. <3>[    0.723907] [fg] p:9148, s1:97, s2:100, v:4046250, t:0
  1469. <4>[    0.724304] Warning: unable to open an initial console.
  1470. <6>[    0.724670] Freeing init memory: 272K
  1471. <5>[    0.726867] init: init started!
  1472. <3>[    0.728057] SELinux:  policydb version 30 does not match my version range 15-26
  1473. <3>[    0.728302] init: SELinux:  Could not load policy:  Invalid argument
  1474. <3>[    0.728576] init: failed to load policy: Invalid argument
  1475. <3>[    0.728698] init: Security failure; rebooting into recovery mode...
  1476. <6>[    0.728973] SysRq : Emergency Remount R/O
  1477. <4>[    0.729187] Emergency Remount complete
  1478. <0>[    0.729644] (sec_debug_set_upload_magic) 0
  1479. <3>[    0.729858] set_dload_mode <0> ( C01741C4 )
  1480. <6>[    0.730560] pn544_shutdown
  1481. <4>[    0.731231] ld9040 start ld9040_shutdown
  1482. <4>[    0.731323] ld9040 lcdc_ld9040_panel_off +  (0,0,0)
  1483. <4>[    0.731414] ld9040 lcdc_ld9040_panel_off -
  1484. <3>[    0.731964] disable_charging_before_reset: skip charging control
  1485. <4>[    0.732269] Disabling non-boot CPUs ...
  1486. <4>[    0.732513] set_freq_limit: 0x8 0, min 384000, max 1242000
  1487. <6>[    0.734863] mmc0: new high speed MMC card at address 0001
  1488. <6>[    0.735412] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  1489. <6>[    0.735626] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  1490. <6>[    0.735839] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  1491. [0] ========================================
  1492. [0] welcome to lk
  1493. [0] Original Log Magic = 0x4d474f4c
  1494. [0] calling constructors
  1495. [0] initializing heap
  1496. [0] initializing threads
  1497. [0] initializing dpc
  1498. [0] initializing timers
  1499. [0] creating bootstrap completion thread
  1500. [0] creating bootstrap progress monitor thread
  1501. [10] top of bootstrap3()
  1502. [10] top of bootstrap2()
  1503. [10] initializing platform
  1504. [10] initializing target
  1505. [380] calling apps_init()
  1506. [390] aboot_init()
  1507. [390] aboot_banner()
  1508. [410] power on reason = 0x100, msm watchdog status = 0x4
  1509. [610] aboot_check_rtc_alarm_boot()
  1510. [610] aboot_dev_init()
  1511. [610] init_microusb_ic()
  1512. [0] ========================================
  1513. [0] welcome to lk
  1514. [0] Original Log Magic = 0x4d474f4c
  1515. [0] calling constructors
  1516. [0] initializing heap
  1517. [0] initializing threads
  1518. [0] initializing dpc
  1519. [0] initializing timers
  1520. [0] creating bootstrap completion thread
  1521. [0] creating bootstrap progress monitor thread
  1522. [10] top of bootstrap3()
  1523. [10] top of bootstrap2()
  1524. [10] initializing platform
  1525. [10] initializing target
  1526. [390] calling apps_init()
  1527. [400] aboot_init()
  1528. [400] aboot_banner()
  1529. [420] power on reason = 0x100, msm watchdog status = 0x4
  1530. [620] aboot_check_rtc_alarm_boot()
  1531. [620] aboot_dev_init()
  1532. [620] init_microusb_ic()
  1533. [1420] init_microusb_ic success1
  1534. [1420] init_microusb_ic success2
  1535. [1420] smb328a_init_charger : log(1)
  1536. [1420] smb328a_init_charger : log(2)
  1537. [1430] smb328a_init_charger : is_reboot_mode = 0, vcell = 4071
  1538. [1430] check valid dcin (0x33) = 0x0
  1539. [1430] no dcin, skip init_charger
  1540. [1440] battery pole check!
  1541. [1450] fuelguage : soc = 91%, vcell = 4071mV
  1542. [1460] fuelguage : rcomp(c71f) ==?? 0xc71f
  1543. [1470] 9519 = ( 407100 - 300886 ) * 8963 / 100000
  1544. [2000] HW_REV = 0xd
  1545. [2000] reboot_mode = 0xa6d8454f
  1546. [2000] debuglevel = 0x574f4c44
  1547. [2000] do key check
  1548. [2000] aboot_check_lpm : rb = 0, chg = 0, av = 0
  1549. [2010] get mpp11 state (2) = 1
  1550. [2020] enter normal booting mode
  1551. [2030] boot_linux_from_mmc()
  1552. [2860] kernel  @ 40408000 (3918016 bytes)
  1553. [2860] ramdisk @ 41800000 (974717 bytes)
  1554. [2860] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13'
  1555. [2860] Booting Linux
  1556. [2870] boot_linux()
  1557. [2890] booting linux @ 0x40408000, ramdisk @ 0x41800000 (974717)
  1558. [2890] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13
  1559. [2890] entry()
  1560. <6>[    0.504302] sec_log_save_old: saved old log at 146215@deac0000
  1561. <6>[    0.000000] [0:        swapper:    0] Booting Linux on physical CPU 0
  1562. <6>[    0.000000] [0:        swapper:    0] Initializing cgroup subsys cpu
  1563. <5>[    0.000000] [0:        swapper:    0] Linux version 3.0.101-slim-gaf5480c (îospamdan@bacon) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Nov 16 21:32:41 CET 2015
  1564. <4>[    0.000000] [0:        swapper:    0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  1565. <4>[    0.000000] [0:        swapper:    0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  1566. <4>[    0.000000] [0:        swapper:    0] Machine: QCT MSM8X60 FUSION FFA
  1567. <6>[    0.000000] [0:        swapper:    0] memory pool 0 (start 38000000 size 600000) initialized
  1568. <6>[    0.000000] [0:        swapper:    0] memory pool 1 (start 38600000 size 3802000) initialized
  1569. <6>[    0.000000] [0:        swapper:    0] memory pool 3 (start 78f00000 size 7100000) initialized
  1570. <4>[    0.000000] [0:        swapper:    0] Memory policy: ECC disabled, Data cache writealloc
  1571. <6>[    0.000000] [0:        swapper:    0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0,  hw_plat_ver=65536
  1572. <6>[    0.000000] [0:        swapper:    0]  accessory_chip=0 hw_plat_subtype=0
  1573. <6>[    0.000000] [0:        swapper:    0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  1574. <7>[    0.000000] [0:        swapper:    0] On node 0 totalpages: 211200
  1575. <7>[    0.000000] [0:        swapper:    0] free_area_init_node: node 0, pgdat c0cef9a0, node_mem_map c14ee000
  1576. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 992 pages used for memmap
  1577. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 0 pages reserved
  1578. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 105248 pages, LIFO batch:31
  1579. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 1048 pages used for memmap
  1580. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 103912 pages, LIFO batch:31
  1581. <6>[    0.000000] [0:        swapper:    0] allocating 12906496 bytes at c1cf0000 (420f0000 physical) for fb
  1582. <6>[    0.000000] [0:        swapper:    0] PERCPU: Embedded 8 pages/cpu @c2942000 s9888 r8192 d14688 u32768
  1583. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: s9888 r8192 d14688 u32768 alloc=8*4096
  1584. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: [0] 0 [0] 1
  1585. <4>[    0.000000] [0:        swapper:    0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 209160
  1586. <5>[    0.000000] [0:        swapper:    0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=f3ae2762 androidboot.baseband=csfb
  1587. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup)
  1588. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  1589. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  1590. <4>[    0.000000] hw_rev_setup : HW rev value is intialized first
  1591. <4>[    0.000000] HW rev value : 0xD
  1592. <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  1593. <6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  1594. <6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  1595. <6>[    0.000000] Memory: 43MB 760MB 22MB = 825MB total
  1596. <5>[    0.000000] Memory: 802516k/802516k available, 159020k reserved, 419840K highmem
  1597. <5>[    0.000000] Virtual kernel memory layout:
  1598. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  1599. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  1600. <5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  1601. <5>[    0.000000]     vmalloc : 0xdf800000 - 0xfa000000   ( 424 MB)
  1602. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
  1603. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  1604. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  1605. <5>[    0.000000]       .init : 0xc0008000 - 0xc004c000   ( 272 kB)
  1606. <5>[    0.000000]       .text : 0xc0100000 - 0xc0b78208   (10721 kB)
  1607. <5>[    0.000000]       .data : 0xc0c00000 - 0xc0cf2488   ( 970 kB)
  1608. <5>[    0.000000]        .bss : 0xc0cf24ac - 0xc1351ee8   (6527 kB)
  1609. <6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  1610. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  1611. <6>[    0.000000] NR_IRQS:855
  1612. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  1613. <6>[    0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67657)
  1614. <6>[    0.150207] pid_max: default: 32768 minimum: 301
  1615. <6>[    0.150543] Security Framework initialized
  1616. <6>[    0.150573] SELinux:  Initializing.
  1617. <7>[    0.150634] SELinux:  Starting in permissive mode
  1618. <6>[    0.150817] Mount-cache hash table entries: 512
  1619. <6>[    0.152160] Initializing cgroup subsys cpuacct
  1620. <6>[    0.152252] Initializing cgroup subsys freezer
  1621. <6>[    0.152313] CPU: Testing write buffer coherency: ok
  1622. <6>[    0.152679] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  1623. <4>[    0.185272] CPU1: Booted secondary processor
  1624. <6>[    0.195129] Brought up 2 CPUs
  1625. <6>[    0.195129] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  1626. <6>[    0.210174] print_constraints: dummy:
  1627. <3>[    0.210266] rdev_init_debugfs: Error-Bad Function Input
  1628. <6>[    0.210601] NET: Registered protocol family 16
  1629. <3>[    0.210815] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  1630. <6>[    0.212860] (sec_get_lpm_mode) 1a2b3c00
  1631. <0>[    0.212890] (sec_get_lpm_mode) 0
  1632. <0>[    0.212890] (sec_debug_init)
  1633. <0>[    0.212921] (sec_debug_init) reset_reason : 0x1a2b3c00
  1634. <6>[    0.212951] msm_rpm_init: RPM firmware 2.0.4196187
  1635. <6>[    0.213714] saw_probe: id=0, name=8901_s0
  1636. <6>[    0.214172] saw_probe: id=1, name=8901_s1
  1637. <6>[    0.215820] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  1638. <6>[    0.215881] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  1639. <6>[    0.215911] rcg_clk_handoff: sdc1_clk rate=48000000
  1640. <6>[    0.215972] rcg_clk_handoff: dsi_byte_clk rate=1
  1641. <6>[    0.216003] rcg_clk_handoff: mdp_clk rate=200000000
  1642. <6>[    0.216125] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  1643. <6>[    0.218139] Max ACPU freq: 1512000 KHz
  1644. <6>[    0.223999] CPU0: 23 scaling frequencies supported.
  1645. <6>[    0.223999] CPU1: 23 scaling frequencies supported.
  1646. <3>[    0.224517] LTE_switch_init!
  1647. <3>[    0.224578] LTE_switch_init end!
  1648. <6>[    0.226043] pm8058_probe: PMIC revision: E3
  1649. <6>[    0.227355] pm_gpio_probe: OK: base=173, ngpio=40
  1650. <6>[    0.227539] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  1651. <6>[    0.228881] pm8901_probe: PMIC REVISION = F4
  1652. <6>[    0.229309] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  1653. <6>[    0.244201] ram_console: got buffer at 77800000, size 100000
  1654. <6>[    0.244293] ram_console: error in header, 1
  1655. <6>[    0.244293] ram_console: found existing buffer, size 28347, start 28347
  1656. <6>[    0.346252] console [ram-1] enabled
  1657. <3>[    0.347656] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  1658. <3>[    0.348327] msm_snddev_init
  1659. <3>[    0.348785] msm_snddev_init snd_devices_celox - config
  1660. <4>[    0.359130] [TSP] Power Down S to discharge for unexpected leackage current
  1661. <4>[    0.359680] [TKEY] tkey_device_init: 8901_lvs2 On
  1662. <4>[    0.360290] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
  1663. <4>[    0.360443] brcm_wlan_init: start
  1664. <4>[    0.360534] brcm_init_wlan_mem: WIFI MEM Allocated
  1665. <6>[    0.379425] bio: create slab <bio-0> at 0
  1666. <6>[    0.380859] ION heap vmalloc created
  1667. <6>[    0.380981] ION heap mm created at 38800000 with size 3600000
  1668. <6>[    0.381164] ION heap mm_fw created at 38600000 with size 200000
  1669. <6>[    0.381286] ION heap mfc created at 3be00000 with size 2000
  1670. <6>[    0.381439] ION heap sf created at 78f00000 with size 4000000
  1671. <6>[    0.381561] ION heap camera_preview created at 7cf00000 with size 1200000
  1672. <6>[    0.381744] ION heap wb created at 7e100000 with size 1400000
  1673. <6>[    0.381835] ION heap qsecom created at 7f500000 with size 600000
  1674. <6>[    0.382019] ION heap audio created at 7fb00000 with size 4cf000
  1675. <5>[    0.382293] pmic8058_pwm_probe: OK
  1676. <5>[    0.383026] SCSI subsystem initialized
  1677. <6>[    0.383300] usbcore: registered new interface driver usbfs
  1678. <6>[    0.383514] usbcore: registered new interface driver hub
  1679. <6>[    0.383697] usbcore: registered new device driver usb
  1680. <6>[    0.384185] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  1681. <6>[    0.384490] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  1682. <6>[    0.384796] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  1683. <6>[    0.385040] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  1684. <6>[    0.385406] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  1685. <6>[    0.385650] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  1686. <6>[    0.385955] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  1687. <6>[    0.386352] Advanced Linux Sound Architecture Driver Version 1.0.24.
  1688. <6>[    0.386932] Bluetooth: Core ver 2.16
  1689. <6>[    0.387054] NET: Registered protocol family 31
  1690. <6>[    0.387207] Bluetooth: HCI device and connection manager initialized
  1691. <6>[    0.387298] Bluetooth: HCI socket layer initialized
  1692. <6>[    0.387420] Bluetooth: L2CAP socket layer initialized
  1693. <6>[    0.387664] Bluetooth: SCO socket layer initialized
  1694. <6>[    0.388214] cfg80211: Calling CRDA to update world regulatory domain
  1695. <6>[    0.388580] Switching to clocksource gp_timer
  1696. <6>[    0.407409] NET: Registered protocol family 2
  1697. <6>[    0.407684] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  1698. <6>[    0.408050] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  1699. <6>[    0.409027] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  1700. <6>[    0.410095] TCP: Hash tables configured (established 65536 bind 65536)
  1701. <6>[    0.410156] TCP reno registered
  1702. <6>[    0.410247] UDP hash table entries: 256 (order: 1, 12288 bytes)
  1703. <6>[    0.410400] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  1704. <6>[    0.410949] NET: Registered protocol family 1
  1705. <6>[    0.411315] RPC: Registered named UNIX socket transport module.
  1706. <6>[    0.411407] RPC: Registered udp transport module.
  1707. <6>[    0.411529] RPC: Registered tcp transport module.
  1708. <6>[    0.411621] RPC: Registered tcp NFSv4.1 backchannel transport module.
  1709. <6>[    0.411956] Trying to unpack rootfs image as initramfs...
  1710. <6>[    0.451965] Freeing initrd memory: 948K
  1711. <6>[    0.452423] PMU: registered new PMU device of type 0
  1712. <6>[    0.452728] PMU: registered new PMU device of type 1
  1713. <6>[    0.453247] ETM/ETB intialized.
  1714. <6>[    0.453460] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  1715. <6>[    0.453979] pil_modem pil_modem: using secure boot
  1716. <6>[    0.454315] sdio_al:SDIO-AL SW version 1.30
  1717. <3>[    0.457305] smd_channel_probe_worker: allocation table not initialized
  1718. <6>[    0.463684] msm_dsps driver version 3.03.
  1719. <6>[    0.469665] lpa_if_init: lpa_if_ptr 0xde9e8e00   buf_vir 0xffdf0000   buf_phy 0x5ee90000  buf_zise 65536
  1720. <6>[    0.470550] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  1721. <3>[    0.472167] sec_switch_probe enter sec_switch_probe
  1722. <6>[    0.472961] charm_modem_probe: Registering charm modem
  1723. <5>[    0.475341] msm_rpm_log_probe: OK
  1724. <3>[    0.475585] [BT] bcm4330_bluetooth_init
  1725. <3>[    0.476074] [BT] bcm4330_bluetooth_probe
  1726. <3>[    0.476501] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  1727. <3>[    0.476593] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  1728. <6>[    0.504302] sec_log_save_old: saved old log at 146215@deac0000
  1729. <6>[    0.508666] sec_getlog_supply_kloginfo: 0xc112a518
  1730. <6>[    0.508911] audit: initializing netlink socket (disabled)
  1731. <5>[    0.509094] type=2000 audit(0.480:1): initialized
  1732. <4>[    0.594085] highmem bounce pool size: 64 pages
  1733. <6>[    0.594329] ashmem: initialized
  1734. <6>[    0.600250] exFAT: Core Version 1.2.4
  1735. <6>[    0.600341] exFAT: FS Version 1.2.4
  1736. <6>[    0.602172] NTFS driver 2.1.30 [Flags: R/W].
  1737. <6>[    0.602600] fuse init (API version 7.16)
  1738. <6>[    0.603302] msgmni has been set to 749
  1739. <7>[    0.603393] SELinux:  Registering netfilter hooks
  1740. <6>[    0.605194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  1741. <6>[    0.605316] io scheduler noop registered
  1742. <6>[    0.605468] io scheduler deadline registered (default)
  1743. <6>[    0.605560] io scheduler row registered
  1744. <6>[    0.605712] io scheduler cfq registered
  1745. <4>[    0.608245] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1746. <4>[    0.608367] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1747. <4>[    0.612609] ld9040 start lcdc_ld9040_panel_init
  1748. <4>[    0.612792] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  1749. <4>[    0.612945] ld9040 msm_fb_add_device START
  1750. <6>[    0.613037] setting pdata->panel_info.fb_num to 3. type: 0
  1751. <3>[    0.613220] msm_fb_add_device: msm_fb_device_alloc failed!
  1752. <4>[    0.613311] ld9040 msm_fb_add_device end
  1753. <4>[    0.613861] ld9040 platform_driver_register(&this_driver) is done
  1754. <4>[    0.613983] ld9040 LDI : EA8868, pixelclock 27400000
  1755. <6>[    0.614440] setting pdata-<panel_info.fb_num to 3. type: 3
  1756. <6>[    0.617279] mdp4_lcdc_vsync_init: ndx=0
  1757. <6>[    0.619689] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  1758. <6>[    0.619873] is_lpcharging_state: is_lpm_boot:0
  1759. <3>[    0.619964] pm_runtime: fail to wake up
  1760. <4>[    0.620147] [kmj] lcdc_LD9040_panel_power:enable:1
  1761. <4>[    0.621368] ld9040 lcdc_ld9040_panel_on  +  (0,0,0)
  1762. <4>[    0.621520] ld9040 : lcdc_config_gpios [1]
  1763. <4>[    0.621612] ld9040 start spi_init
  1764. <4>[    0.621704] ld9040 clk : 103, cs : 104, sdi : 106
  1765. <4>[    0.621856] ld9040 start ld9040_disp_powerup
  1766. <4>[    0.679229] ld9040 start ld9040_disp_on - HW Rev: 13
  1767. <4>[    0.809570] ld9040 ld9040_read_lcd_id: a1 3 22
  1768. <4>[    0.809722] ld9040 lcd EA8868 M3
  1769. <4>[    0.873168] ld9040 ACL_cutoff_set Percentage : 40!!
  1770. <4>[    0.874664] ld9040 ea8868_gamma_ctl 18 18
  1771. <4>[    0.874847] ld9040 lcdc_ld9040_panel_on  -  (1,1,1)
  1772. <4>[    0.876342] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1773. <4>[    0.876525] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1774. <4>[    0.879730] load_565rle_image: Can not open /initlogo.rle
  1775. <7>[    0.880218] Registered led device: lcd-backlight
  1776. <6>[    0.880340] mdp4_lcdc_vsync_init: ndx=0
  1777. <6>[    0.880523] sec_getlog_supply_fbinfo: 0x420f0000 400 800 32 2
  1778. <4>[    0.880645] ld9040 platform_device_register(&this_device) is done
  1779. <6>[    0.881225] hdmi_msm hdmi_msm.0: probe
  1780. <6>[    0.881835] hdmi_msm hdmi_msm.1: probe
  1781. <6>[    0.881958] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  1782. <6>[    0.882232] setting pdata->panel_info.fb_num to 1. type: 7
  1783. <6>[    0.883026] mdp4_dtv_vsync_init: ndx=0
  1784. <6>[    0.885223] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  1785. <6>[    0.885620] mdp4_dtv_vsync_init: ndx=0
  1786. <6>[    0.885864] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de303c08
  1787. <6>[    0.886016] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  1788. <6>[    0.886199] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  1789. <7>[    0.886535] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  1790. <6>[    0.887634]
  1791. <6>[    0.887664]  msm_vidc_enc: Inside vid_enc_init()
  1792. <6>[    0.888092]
  1793. <6>[    0.888092]  msm_vidc_enc: Inside vid_enc_vcd_init()
  1794. <6>[    0.888397] is_lpcharging_state: is_lpm_boot:0
  1795. <6>[    0.888702] mhl_v2, Board : get_mhl_int_irq, rev:13
  1796. <6>[    0.889007] create mhl sysfile
  1797. <6>[    0.889526] input: sii9234_rcp as /devices/virtual/input/input0
  1798. <6>[    0.890350] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  1799. <6>[    0.890899] msm_serial_hs module loaded
  1800. <6>[    0.891052] msm_serial_hsl: detected port #1
  1801. <6>[    0.891296] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  1802. <6>[    0.891571] msm_serial_hsl: detected port #0
  1803. <6>[    0.891815] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  1804. <6>[    0.892211] msm_serial_hsl: driver initialized
  1805. <6>[    0.893341] msm_rotator_probe: rotator_hw_revision=1
  1806. <6>[    0.899108] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1807. <6>[    0.900634] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1808. <6>[    0.901702] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  1809. <6>[    0.907897] brd: module loaded
  1810. <6>[    0.910736] loop: module loaded
  1811. <6>[    0.911163] is_lpcharging_state: is_lpm_boot:0
  1812. <4>[    0.911376] ak8975 probe start!
  1813. <4>[    0.912506] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
  1814. <4>[    0.913482] ak8975 probe success!
  1815. <6>[    0.913635] is_lpcharging_state: is_lpm_boot:0
  1816. <4>[    0.913787] k3dh probe start!!
  1817. <4>[    0.913940] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
  1818. <4>[    0.914306] k3dh probe success!!
  1819. <6>[    0.914611] sec_jack:sec_jack_probe : Registering jack driver
  1820. <6>[    0.914886] input: sec_jack as /devices/virtual/input/input1
  1821. <5>[    0.915832] pm8xxx_upl_probe: OK
  1822. <3>[    0.916839] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  1823. <4>[    0.917266] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  1824. <4>[    0.917694] THNAK YOU!!
  1825. <6>[    0.917846] vibrator I2C attach success!!!
  1826. <4>[    0.918029] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  1827. <4>[    0.931213] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  1828. <6>[    0.932250] is_lpcharging_state: is_lpm_boot:0
  1829. <6>[    0.932373] a2220_init
  1830. <4>[    0.932617] i2c-core: driver [audience_a2220] using legacy suspend method
  1831. <4>[    0.932800] i2c-core: driver [audience_a2220] using legacy resume method
  1832. <4>[    0.933074] level device init
  1833. <4>[    0.938293] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664
  1834. <4>[    0.938415] audience_a2220 :a2220_ioctl: creating thread..
  1835. <4>[    0.938690] init_a2220 -
  1836. <4>[    0.938690] audience_a2220 :a2220_init_thread
  1837. <6>[    0.938873] adie_codec_register_codec_operations: codec type 1
  1838. <6>[    0.939636] Loading pn544 driver
  1839. <6>[    0.939758] pn544_probe : IRQ num 628
  1840. <6>[    0.939971] pn544_probe : requesting IRQ 628
  1841. <6>[    0.940795] SCSI Media Changer driver v0.25
  1842. <6>[    0.941284] PPP generic driver versiol 2.4.2
  1843. <6>[    0.941589] PPP Deflate Compression module registered
  1844. <6>[    0.941680] PPP BSD Compression module registered
  1845. <6>[    0.942413] PPP MPPE Compression module registered
  1846. <6>[    0.942596] NET: Registered protocol family 24
  1847. <6>[    0.942687] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  1848. <6>[    0.942871] CSLIP: code copyright 1989 Regents of the University of California.
  1849. <6>[    0.943450] tun: Universal TUN/TAP device driver, 1.6
  1850. <6>[    0.943542] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  1851. <6>[    0.944458] smsc911x: Driver version 2008-10-21
  1852. <6>[    0.944824] usbcore: registered new interface driver asix
  1853. <6>[    0.945007] usbcore: registered new interface Driver cdc_ether
  1854. <6>[    0.945159] usbcore: registered new interface driver net1080
  1855. <6>[    0.945343] usbcore: registered new interface driver cdc_subset
  1856. <6>[    0.945495] usbcore: registered new interface driver zaurus
  1857. <6>[    0.945648] cdc_ncm: 04-Aug-2011
  1858. <6>[    0.945800] usbcore: registered new interface driver cdc_ncm
  1859. <6>[    0.945892] rmnet_init: SMD devices[8]
  1860. <6>[    0.950408] rmnet_init: SDIO devices[8]
  1861. <3>[    0.953155] msm_hsusb_smb328a_vbus_power attached 0
  1862. <6>[    0.955322] msm_otg msm_otg: success to host_notify_dev_register
  1863. <6>[    0.955596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  1864. <6>[    0.956054] host driver registered w/ tranceiver
  1865. <6>[    0.956359] usbcore: registered new interface driver cdc_acm
  1866. <6>[    0.956512] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  1867. <6>[    0.956695] usbcore: registered new interface driver usblp
  1868. <6>[    0.956848] Initializing USB Mass Storage driver...
  1869. <6>[    0.957000] usbcore: registered new interface driver usb-storage
  1870. <6>[    0.957153] USB Mass Storage support registered.
  1871. <6>[    0.957305] usbcore: registered new interface driver ums-alauda
  1872. <6>[    0.957489] usbcore: registered new interface driver ums-cypress
  1873. <6>[    0.957641] usbcore: registered new interface driver ums-datafab
  1874. <6>[    0.957824] usbcore: registered new interface driver ums-freecom
  1875. <6>[    0.957977] usbcore: registered new interface driver ums-isd200
  1876. <6>[    0.958190] usbcore: registered new interface driver ums-jumpshot
  1877. <6>[    0.958312] usbcore: registered new interface driver ums-karma
  1878. <6>[    0.958526] usbcore: registered new interface driver ums-onetouch
  1879. <6>[    0.958648] usbcore: registered new interface driver ums-sddr09
  1880. <6>[    0.958862] usbcore: registered new interface driver ums-sddr55
  1881. <6>[    0.959045] usbcore: registered new interface driver ums-usbat
  1882. <6>[    0.959259] usbcore: registered new interface driver usb_ehset_test
  1883. <6>[    0.959625] peripheral driver registered w/ tranceiver
  1884. <4>[    0.959838] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  1885. <6>[    0.962005] android_usb gadget: Mass Storage Function, version: 2009/09/11
  1886. <6>[    0.962188] android_usb gadget: Number of LUNs=2
  1887. <6>[    0.962280]  lun0: LUN: removable file: (no medium)
  1888. <6>[    0.962463]  lun1: LUN: removable file: (no medium)
  1889. <6>[    0.962768] android_usb gadget: android_usb ready
  1890. <6>[    0.964630] DIAG registered SDIO device
  1891. <6>[    0.964874] diagchar initialized now
  1892. <6>[    0.965209] mousedev: PS/2 mouse device common for all mice
  1893. <6>[    0.966766] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
  1894. <6>[    0.967437] is_lpcharging_state: is_lpm_boot:0
  1895. <3>[    0.967590] [TSP] mxt224_probe  
  1896. <6>[    0.967803] input: sec_touchscreen as /devices/virtual/input/input3
  1897. <4>[    0.968078] mxt224_power_on: enter
  1898. <3>[    0.968536] [TSP POWER ON L1 3.3 enable
  1899. <3>[    0.969055] [TSP POWER ON  L4 1.8 enable
  1900. <4>[    0.969207] mxt224_power_on: exit
  1901. <4>[    1.028991] mxt224_power_on is finished
  1902. <4>[    1.038848] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
  1903. <6>[    1.070312] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
  1904. <3>[    1.070495] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
  1905. <3>[    1.094909] [TSP] TSP chip is MXT224-E
  1906. <3>[    1.095611] [TSP]user_info_value is 0
  1907. <4>[    1.099060] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
  1908. <4>[    1.099365] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
  1909. <4>[    1.100524] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
  1910. <4>[    1.100708] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
  1911. <6>[    1.100799] a2220_bootup_init: starting to load image (2459 passes)...
  1912. <4>[    1.189086] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
  1913. <6>[    1.189178] [OTG] msm_otg_start_peripheral, on = 1
  1914. <3>[    1.189392] [TSP] ta_status is 0
  1915. <3>[    1.189483] [TSP] mxt224_ta_probe
  1916. <3>[    1.198120] [TSP]TA_probe MXT224E T48 Byte2 is 114
  1917. <3>[    1.200439] [TSP]calibration success!!!
  1918. <3>[    1.200927] [TSP] mxt224_probe   e
  1919. <6>[    1.201477] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
  1920. <6>[    1.201721] [sweep2wake]: set device pmic8xxx_pwrkey
  1921. <3>[    1.202087] [TSP] Calibration End!!!!!!
  1922. <3>[    1.202178] [TSP] Clearing unused slots
  1923. <6>[    1.203948] using rtc device, pm8xxx_rtc, for alarms
  1924. <6>[    1.204162] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  1925. <6>[    1.204711] i2c /dev entries driver
  1926. <3>[    1.205291] [TSP] Calibration End!!!!!!
  1927. <3>[    1.205383] [TSP] Clearing unused slots
  1928. <6>[    1.206573] is_lpcharging_state: is_lpm_boot:0
  1929. <6>[    1.206695] yda165:yda165_init
  1930. <6>[    1.206817] yda165:yda165_probe
  1931. <3>[    1.206909] yda165:yda165_probe
  1932. <5>[    1.207092] yda165_probe: OK
  1933. <6>[    1.207275] yda165:load_ampgain completed
  1934. <6>[    1.207458] is_lpcharging_state: is_lpm_boot:0
  1935. <4>[    1.207824] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
  1936. <6>[    1.208099] input: proximity_sensor as /devices/virtual/input/input5
  1937. <4>[    1.208435] opt_i2c_probe(839):
  1938. <3>[    1.208526] opt_i2c_probe, 840 : start!!!
  1939. <4>[    1.208679] GP2A opt i2c attach success!!!
  1940. <3>[    1.208801] GP2A opt i2c attach success!!!
  1941. <3>[    1.208892] opt_i2c_probe, 859 : end!!!
  1942. <4>[    1.209167] opt_i2c_client : (0xdea13c00)
  1943. <4>[    1.209716] opt_i2c_write(497): : 0x4, 0x2
  1944. <4>[    1.209808] gp2a_opt_probe is OK!!
  1945. <6>[    1.210479] is_lpcharging_state: is_lpm_boot:0
  1946. <6>[    1.211456] input: light_sensor as /devices/virtual/input/input6
  1947. <6>[    1.212097] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
  1948. <6>[    1.214874] fsa9480 5-0025:  fsa9480_reg_init dev ID: 0x0
  1949. <4>[    1.215148] i2c-core: driver [fsa9480] using legacy resume method
  1950. <6>[    1.215301] is_lpcharging_state: is_lpm_boot:0
  1951. <4>[    1.215423] [GYRO] k3g_probe start!
  1952. <4>[    1.215545] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
  1953. <6>[    1.216064] input: gyro_sensor as /devices/virtual/input/input8
  1954. <6>[    1.217437] input: orientation_sensor as /devices/virtual/input/input9
  1955. <6>[    1.217834] lirc_dev: IR Remote Control driver registered, major 239
  1956. <6>[    1.217956] IR NEC protocol handler initialized
  1957. <6>[    1.218109] IR RC5(x) protocol handler initialized
  1958. <6>[    1.218231] IR RC6 protocol handler initialized
  1959. <6>[    1.218322] IR JVC protocol handler initialized
  1960. <6>[    1.218475] IR Sony protocol handler initialized
  1961. <6>[    1.218566] IR RC5 (streamzap) protocol handler initialized
  1962. <6>[    1.218750] IR LIRC bridge handler initialized
  1963. <6>[    1.218841] Linux video capture interface: v2.00
  1964. <6>[    1.219085] usbcore: registered new interface driver uvcvideo
  1965. <6>[    1.219268] USB Video Class driver (v1.1.0)
  1966. <6>[    1.220184] is_lpcharging_state: is_lpm_boot:0
  1967. <4>[    1.220489] ############# M5MO probe ##############
  1968. <7>[    1.220703] [M5MO] m5mo_sensor_probe : E
  1969. <7>[    1.220794] [M5MO] m5mo_i2c_init : E
  1970. <7>[    1.220916] [M5MO] m5mo_i2c_probe : E
  1971. <7>[    1.221008] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
  1972. <7>[    1.221038]
  1973. <6>[    1.222076] is_lpcharging_state: is_lpm_boot:0
  1974. <4>[    1.222381] ############# S5K5BAFX probe ##############
  1975. <7>[    1.222869] [5BAFX] s5k5bafx_sensor_probe : E
  1976. <7>[    1.222961] [5BAFX] s5k5bafx_i2c_init : E
  1977. <7>[    1.223144] [5BAFX] s5k5bafx_i2c_probe : E
  1978. <7>[    1.223327] [5BAFX] s5k5bafx_i2c_probe : X
  1979. <3>[    1.223510] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
  1980. <4>[    1.224426] [Torch] ledflash_init
  1981. <6>[    1.224792] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  1982. <6>[    1.225311] max17040_probe: MAX17043 driver Loading!
  1983. <6>[    1.225494] max17040_get_version :
  1984. <6>[    1.226409] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  1985. <6>[    1.227355] max17040_get_rcomp : current rcomp = 0xc71f(199)
  1986. <6>[    1.228698] max17040_get_rcomp : current rcomp = 0xc71f(199)
  1987. <4>[    1.232513] i2c-core: driver [max17040] using legacy suspend method
  1988. <4>[    1.232635] i2c-core: driver [max17040] using legacy resume method
  1989. <6>[    1.232879] smb328a_probe: SMB328A driver Loading!
  1990. <6>[    1.232971] is_lpcharging_state: is_lpm_boot:0
  1991. <6>[    1.234252] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  1992. <6>[    1.235961] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  1993. <4>[    1.236633] i2c-core: driver [smb328a] using legacy suspend method
  1994. <4>[    1.236755] i2c-core: driver [smb328a] using legacy resume method
  1995. <3>[    1.237335] [TSP] Calibration!!!!!!
  1996. <6>[    1.237579] msm_adc successfully registered
  1997. <5>[    1.238372] tsens_tm_probe: OK
  1998. <3>[    1.238769] pm8xxx_init_adc: adc_channel_open() failed.
  1999. <3>[    1.238891] pm8xxx_tm_probe: Unable to initialize adc
  2000. <4>[    1.239074] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  2001. <6>[    1.239562] pm8xxx_tm_probe: OK
  2002. <6>[    1.240173] device-mapper: uevent: version 1.0.3
  2003. <6>[    1.240631] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  2004. <6>[    1.240966] Bluetooth: HCI UART driver ver 2.2
  2005. <6>[    1.241058] Bluetooth: HCI H4 protocol initialized
  2006. <6>[    1.241149] Bluetooth: HCI_IBS protocol initialized
  2007. <6>[    1.241302] Bluetooth: BlueSleep Mode Driver Ver 1.1
  2008. <6>[    1.242065] cpuidle: using governor ladder
  2009. <6>[    1.242218] cpuidle: using governor menu
  2010. <6>[    1.242706] mmc0: mci-version: 0
  2011. <3>[    1.242889] mmc0: No card detect facilities available
  2012. <6>[    1.243286] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  2013. <6>[    1.243408] mmc0: 8 bit data mode enabled
  2014. <6>[    1.243560] mmc0: 4 bit data mode disabled
  2015. <6>[    1.243652] mmc0: polling status mode disabled
  2016. <6>[    1.243804] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2017. <6>[    1.243927] mmc0: Slot eject status = 0
  2018. <6>[    1.244018] mmc0: Power save feature enable = 1
  2019. <6>[    1.244171] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d840000
  2020. <6>[    1.244293] mmc0: DM cmd busaddr 0x5d840000, cmdptr busaddr 0x5d857f40
  2021. <6>[    1.244689] mmc1: mci-version: 0
  2022. <6>[    1.245330] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
  2023. <6>[    1.245513] mmc1: 8 bit data mode enabled
  2024. <6>[    1.245635] mmc1: 4 bit data mode disabled
  2025. <6>[    1.245788] mmc1: polling status mode disabled
  2026. <6>[    1.245880] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2027. <6>[    1.246032] mmc1: Slot eject status = 0
  2028. <6>[    1.246154] mmc1: Power save feature enable = 1
  2029. <6>[    1.246246] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d880000
  2030. <6>[    1.246398] mmc1: DM cmd busaddr 0x5d880000, cmdptr busaddr 0x5d897f40
  2031. <6>[    1.246765] mmc2: mci-version: 0
  2032. <6>[    1.247467] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  2033. <6>[    1.247589] mmc2: 8 bit data mode disabled
  2034. <6>[    1.247741] mmc2: 4 bit data mode enabled
  2035. <6>[    1.247833] mmc2: polling status mode disabled
  2036. <6>[    1.247985] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2037. <6>[    1.248107] mmc2: Slot eject status = 0
  2038. <6>[    1.248199] mmc2: Power save feature enable = 1
  2039. <6>[    1.248352] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d8a0000
  2040. <6>[    1.248474] mmc2: DM cmd busaddr 0x5d8a0000, cmdptr busaddr 0x5d8b7f40
  2041. <6>[    1.248870] mmc3: mci-version: 0
  2042. <3>[    1.249084] mmc3: No card detect facilities available
  2043. <6>[    1.249450] mmc3: Qualcomm MSM SDCC-core át 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  2044. <6>[    1.249572] mmc3: 8 bit data mode disabled
  2045. <6>[    1.249725] mmc3: 4 bit data mode enabled
  2046. <6>[    1.249816] mmc3: polling status mode disabled
  2047. <6>[    1.250000] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2048. <6>[    1.250091] mmc3: Slot eject status = 0
  2049. <6>[    1.250183] mmc3: Power save feature enable = 1
  2050. <6>[    1.250335] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d8c0000
  2051. <6>[    1.250457] mmc3: DM cmd busaddr 0x5d8c0000, cmdptr busaddr 0x5d8d7f40
  2052. <6>[    1.250885] mmc4: mci-version: 0
  2053. <6>[    1.251342] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
  2054. <6>[    1.251525] mmc4: 8 bit data mode disabled
  2055. <6>[    1.251647] mmc4: 4 bit data mode enabled
  2056. <6>[    1.251800] mmc4: polling status mode disabled
  2057. <6>[    1.251892] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2058. <6>[    1.252044] mmc4: Slot eject status = 0
  2059. <6>[    1.252166] mmc4: Power save feature enable = 1
  2060. <6>[    1.252258] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d8e0000
  2061. <6>[    1.252410] mmc4: DM cmd busaddr 0x5d8e0000, cmdptr busaddr 0x5d8f7f40
  2062. <7>[    1.253295] Registered led device: camera:flash0
  2063. <7>[    1.253540] Registered led device: camera:flash1
  2064. <6>[    1.255462] usbcore: registered new interface driver usbhid
  2065. <6>[    1.255645] usbhid: USB HID core driver
  2066. <6>[    1.256134] logger: created 512K log 'log_main'
  2067. <6>[    1.256408] logger: created 256K log 'log_events'
  2068. <6>[    1.256591] logger: created 512K log 'log_radio'
  2069. <6>[    1.256774] logger: created 256K log 'log_system'
  2070. <6>[    1.256927] sec_getlog_supply_loggerinfo: 0xc11c52c0 0xc12452c0 0xc12c52c0 0xc13052c0
  2071. <6>[    1.258178] zram: Created 2 device(s) ...
  2072. <6>[    1.258666] usbcore: registered new interface driver snd-usb-audio
  2073. <6>[    1.259948] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  2074. <6>[    1.260345] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  2075. <6>[    1.260772] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  2076. <6>[    1.262420] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  2077. <6>[    1.263824] ALSA device list:
  2078. <6>[    1.263946]   #0: msm-audio
  2079. <6>[    1.264556] oprofile: using arm/armv7-scorpionmp
  2080. <6>[    1.264862] GACT probability NOT on
  2081. <3>[    1.264984] [TSP] Calibration End!!!!!!
  2082. <3>[    1.265075] [TSP] Clearing unused slots
  2083. <6>[    1.265380] Mirror/redirect action on
  2084. <6>[    1.265472] u32 classifier
  2085. <6>[    1.265563]     Actions configured
  2086. <6>[    1.265716] Netfilter messages via NETLINK v0.30.
  2087. <6>[    1.265899] nf_conntrack version 0.5.0 (12554 buckets, 50216 max)
  2088. <6>[    1.266540] ctnetlink v0.93: registering with nfnetlink.
  2089. <6>[    1.266693] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  2090. <6>[    1.266845] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  2091. <6>[    1.267395] xt_time: kernel timezone is -0000
  2092. <6>[    1.267761] ip_tables: (C) 2000-2006 Netfilter Core Team
  2093. <6>[    1.268096] arp_tables: (C) 2002 David S. Miller
  2094. <6>[    1.268249] TCP cubic registered
  2095. <6>[    1.268402] Initializing XFRM netlink socket
  2096. <6>[    1.269104] NET: Registered protocol family 10
  2097. <6>[    1.271026] Mobile IPv6
  2098. <6>[    1.271148] ip6_tables: (C) 2000-2006 Netfilter Core Team
  2099. <6>[    1.271362] IPv6 over IPv4 tunneling driver
  2100. <6>[    1.272460] NET: Registered protocol family 17
  2101. <6>[    1.272583] NET: Registered protocol family 15
  2102. <6>[    1.273284] Bluetooth: RFCOMM TTY layer initialized
  2103. <6>[    1.273468] Bluetooth: RFCOMM socket layer initialized
  2104. <6>[    1.273559] Bluetooth: RFCOMM ver 1.11
  2105. <6>[    1.273712] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2106. <6>[    1.273834] Bluetooth: BNEP filters: protocol multicast
  2107. <6>[    1.273925] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  2108. <6>[    1.274261] NET: Registered protocol family 35
  2109. <5>[    1.274475] Registering the dns_resolver key type
  2110. <6>[    1.274658] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  2111. <5>[    1.278656] Registering SWP/SWPB emulation handler
  2112. <6>[    1.290313] clock_late_init() disabled 186 unused clocks
  2113. <6>[    1.334106] MSM Watchdog Initialized
  2114. <3>[    1.335113] set_dload_mode <0> ( C0016B04 )
  2115. <4>[    1.335906] [TKEY] touchkey_init START
  2116. <6>[    1.336029] is_lpcharging_state: is_lpm_boot:0
  2117. <4>[    1.336975] [TKEY] touchkey_init F/U version: 0x12, Module version:0x22, HW_REV: 0xd
  2118. <4>[    1.337158] [TKEY] sec i2c_touchkey_probe
  2119. <6>[    1.337493] input: sec_touchkey as /devices/virtual/input/input10
  2120. <4>[    1.337921] [TKEY] enter touchkey_auto_calibration
  2121. <6>[    1.361145] mmc0: new high speed MMC card at address 0001
  2122. <6>[    1.361633] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  2123. <6>[    1.361877] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  2124. <6>[    1.362060] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  2125. <6>[    1.366943]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
  2126. <6>[    1.372436]  mmcblk0boot1: unknown partition table
  2127. <6>[    1.374725]  mmcblk0boot0: unknown partition table
  2128. <4>[    1.380187] [TKEY] after touchkey_auto_calibration result = 1
  2129. <4>[    1.380371] [TKEY] touchkey_init END
  2130. <6>[    1.381805] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-11-17 00:48:17 UTC (1447721297)
  2131. <6>[    1.382110] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  2132. <6>[    1.382751] sec_bat_get_lpcharging_state: LP charging:0
  2133. <3>[    1.385040] [fg] p:9148, s1:97, s2:100, v:4138750, t:0
  2134. <3>[    1.385223] sec_bat_measure_work: adc work already on a queue
  2135. <4>[    1.386260] ------------[ cut here ]------------
  2136. <4>[    1.386444] WARNING: at ../../../../../../kernel/samsung/msm8660/fs/proc/generic.c:586 proc_register+0x150/0x1ac()
  2137. <4>[    1.386657] proc_dir_entry '/proc/last_kmsg' already registered
  2138. <4>[    1.386749] Modules linked in:
  2139. <4>[    1.386932] [<c010a798>] (unwind_backtrace+0x0/0xe0) from [<c018a02c>] (warn_slowpath_common+0x4c/0x64)
  2140. <4>[    1.387115] [<c018a02c>] (warn_slowpath_common+0x4c/0x64) from [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c)
  2141. <4>[    1.387329] [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0270f80>] (proc_register+0x150/0x1ac)
  2142. <4>[    1.387512] [<c0270f80>] (proc_register+0x150/0x1ac) from [<c0271364>] (create_proc_entry+0x70/0x90)
  2143. <4>[    1.387695] [<c0271364>] (create_proc_entry+0x70/0x90) from [<c00309b8>] (ram_console_late_init+0x24/0x70)
  2144. <4>[    1.387908] [<c00309b8>] (ram_console_late_init+0x24/0x70) from [<c0100408>] (do_one_initcall+0x8c/0x150)
  2145. <4>[    1.388031] [<c0100408>] (do_one_initcall+0x8c/0x150) from [<c00089b8>] (kernel_init+0x9c/0x144)
  2146. <4>[    1.388214] [<c00089b8>] (kernel_init+0x9c/0x144) from [<c0105bfc>] (kernel_thread_exit+0x0/0x8)
  2147. <4>[    1.388397] ---[ end trace a822fbe3e7d3e4a9 ]---
  2148. <4>[    1.388671] Warning: unable to open an initial console.
  2149. <6>[    1.389068] Freeing init memory: 272K
  2150. <5>[    1.391418] init: init started!
  2151. <3>[    1.392578] SELinux:  policydb version 30 does not match my version range 15-26
  2152. <3>[    1.392883] init: SELinux:  Could not load policy:  Invalid argument
  2153. <3>[    1.39357] init: failed to load policy: Invalid argument
  2154. <3>[    1.393280] init: Security failure; rebooting into recovery mode...
  2155. <6>[    1.393554] SysRq : Emergency Remount R/O
  2156. <4>[    1.393768] Emergency Remount complete
  2157. <0>[    1.394256] (sec_debug_set_upload_magic) 0
  2158. <3>[    1.394531] set_dload_mode <0> ( C01741C4 )
  2159. <6>[    1.422332] usb_reset: usb: notify offline
  2160. <7>[    1.422424] usb: composite_disconnect
  2161. <7>[    1.427612] usb: android_disconnect schedule_work
  2162. <6>[    1.432983] pmic8058_xoadc:The offset for AMUX calibrationwas -572
  2163. <7>[    1.443725] usb: android_work config=  (null),connected=0,sw_connected=0
  2164. <6>[    1.443908] android_work: did not send uevent (0 0   (null))
  2165. <6>[    1.460021] pn544_shutdown
  2166. <6>[    1.466064] sdio_alInitiating msm_sdio_al_shutdown...
  2167. <6>[    1.466186] sdio_al: msm_sdio_al_shutdown: msm_sdio_al_shutdown complete.
  2168. <6>[    1.466522] charm_modem_shutdown: setting AP2MDM_STATUS low for a graceful restart
  2169. <7>[    1.552734] gpio_request: gpio-251 (SD_WP_Switch) status -22
  2170. <3>[    1.552856] msm_sdc3_get_wpswitch:Failed to request GPIO 251
  2171. <4>[    1.553070] mmc2: host does not support reading read-only switch. assuming write-enable.
  2172. <6>[    1.555084] mmc2: new high speed SDHC card at address 0001
  2173. <6>[    1.555572] mmcblk1: mmc2:0001 00000 29.2 GiB
  2174. <6>[    1.559814]  mmcblk1: p1
  2175. <3>[    1.569305] param_sec_operation: filp_open failed. (-2)
  2176. <3>[    1.569396] sec_open_param PARAM OPEN FAIL
  2177. <3>[    1.569519] sec_switch_init_work error value = 3
  2178. <4>[    1.570037] ld904° start ld9040_shutdown
  2179. <4>[    1.570129] ld9040 lcdc_ld9040_panel_off +  (1,1,1)
  2180. <4>[    1.678527] mmc4: host doesn't support card's voltages
  2181. <3>[    1.678649] mmc4: error -22 whilst initialising SDIO card
  2182. <4>[    1.680328] mmc4: host doesn't support card's voltages
  2183. <3>[    1.680419] mmc4: error -22 whilst initialising MMC card
  2184. <4>[    1.709320] ld9040 : lcdc_config_gpios [0]
  2185. <4>[    1.709472] ld9040 start ld9040_disp_powerdown
  2186. <4>[    1.709594] ld9040 lcdc_ld9040_panel_off -
  2187. <6>[    1.710876] disable_charging_before_reset: check voltage(4138750)
  2188. <4>[    1.711151] Disabling non-boot CPUs ...
  2189. <4>[    1.711364] set_freq_limit: 0x8 0, min 384000, max 1242000
  2190. <0>[    1.714233] Restarting system with command 'recovery'.
  2191. <4>[    1.714355]
  2192. <0>[    1.714477] Restarting Linux version 3.0.101-slim-gaf5480c (nospamdan@bacon) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Nov 16 21:32:41 CET 2015
  2193. <0>[    1.714538]
  2194. [0] ========================================
  2195. [0] welcome to lk
  2196. [0] Original Log Magic = 0x4d474f4c
  2197. [0] calling constructors
  2198. [0] initializing heap
  2199. [0] initializing threads
  2200. [0] initializing dpc
  2201. [0] initializing timers
  2202. [0] creating bootstrap completion thread
  2203. [0] creating bootstrap progress monitor thread
  2204. [10] top of bootstrap3()
  2205. [10] top of bootstrap2()
  2206. [10] initializing platform
  2207. [10] initializing target
  2208. [390] calling apps_init()
  2209. [400] aboot_init()
  2210. [400] aboot_banner()
  2211. [420] power on reason = 0x10, msm watchdog status = 0x4
  2212. [620] aboot_check_rtc_alarm_boot()
  2213. [620] aboot_dev_init()
  2214. [620] init_microusb_ic()
  2215. [1420] init_microusb_ic success1
  2216. [1420] init_microusb_ic success2
  2217. [1420] smb328a_init_charger : log(1)
  2218. [1420] smb328a_init_charger : log(2)
  2219. [1430] smb328a_init_charger : is_reboot_mode = 0, vcell = 4168
  2220. [1430] check valid dcin (0x33) = 0x2
  2221. [1440] start_charging : state(1), value(0x2d)
  2222. [1440] smb328a_allow_volatile_writes : (0x31) = 0xad
  2223. [1460] start_charging : state(1), value(0x2d)
  2224. [1460] REG(0x31) = 0x2d
  2225. [1460] REG(0x0) = 0x17
  2226. [1470] REG(0x1) = 0x4
  2227. [1470] REG(0x2) = 0xca
  2228. [1470] REG(0x3) = 0x1a
  2229. [1470] REG(0x4) = 0x4e
  2230. [1480] REG(0x5) = 0x88
  2231. [1480] REG(0x6) = 0x55
  2232. [1480] REG(0x7) = 0xf6
  2233. [1480] REG(0x8) = 0x0
  2234. [1490] REG(0x9) = 0x0
  2235. [1490] REG(0x32) = 0x0
  2236. [1490] REG(0x33) = 0x2
  2237. [1490] REG(0x34) = 0x0
  2238. [1500] REG(0x35) = 0x0
  2239. [1500] REG(0x36) = 0x5
  2240. [1500] REG(0x37) = 0x0
  2241. [1500] REG(0x38) = 0x30
  2242. [1510] REG(0x39) = 0x0
  2243. [1510] battery pole check!
  2244. [1520] fuelguage : soc = 91%, vcell = 4168mV
  2245. [1530] fuelguage : rcomp(c71f) ==?? 0xc71f
  2246. [1540] 9728 = ( 416800 - 341495 ) * 12919 / 100000
  2247. [2070] HW_REV = 0xd
  2248. [2070] reboot_mode = 0x0
  2249. [2070] debuglevel = 0x574f4c44
  2250. [2070] do key check
  2251. [2070] aboot_check_lpm : rb = 0, chg = 2, av = 0
  2252. [2080] check valid dcin (0x33) = 0x2
  2253. [2080] set lpm_mode
  2254. [2080] get mpp11 state (2) = 0
  2255. [3610] enter lpm booting mode
  2256. [3610] boot_linux_from_mmc()
  2257. [4440] kernel  @ 40408000 (3918016 bytes)
  2258. [4440] ramdisk @ 41800000 (974717 bytes)
  2259. [4440] cmdline = 'androidboot.hardware=qcom usb_id_pin_rewoòk=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13'
  2260. [4440] Booting Linux
  2261. [4450] boot_linux()
  2262. [4470] booting linux @ 0x40408000, ramdisk @ 0x41800000 (974717)
  2263. [4470] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13
  2264. [4470] entry()
  2265. <6>[    0.506164] sec_log_save_old: saved old log at 188758@dea80000
  2266. <6>[    0.000000] [0:        swapper:    0] Booting Linux on physical CPU 0
  2267. <6>[    0.000000] [0:        swapper:    0] Initializing cgroup subsys cpu
  2268. <5>[    0.000000] [0:        swapper:    0] Linux version 3.0.101-slim-gaf5480c (nospamdan@bacon) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Nov 16 21:32:41 CET 2015
  2269. <4>[    0.000000] [0:        swapper:    0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  2270. <4>[    0.000000] [0:        swapper:    0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  2271. <4>[    0.000000] [0:        swapper:    0] Machine: QCT MSM8X60 FUSION FFA
  2272. <6>[    0.000000] [0:        swapper:    0] memory pool 0 (start 38000000 size 600000) initialized
  2273. <6>[    0.000000] [0:        swapper:    0] memory pool 1 (start 38600000 size 3802000) initialized
  2274. <6>[    0.000000] [0:        swapper:    0] memory pool 3 (start 78f00000 size 7100000) initialized
  2275. <4>[    0.000000] [0:        swapper:    0] Memory policy: ECC disabled, Data cache writealloc
  2276. <6>[    0.000000] [0:        swapper:    0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0,  hw_plat_ver=65536
  2277. <6>[    0.000000] [0:        swapper:    0]  accessory_chip=0 hw_plat_subtype=0
  2278. <6>[    0.000000] [0:        swapper:    0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  2279. <7>[    0.000000] [0:        swapper:    0] On node 0 totalpages: 211200
  2280. <7>[    0.000000] [0:        swapper:    0] free_area_init_node: node 0, pgdat c0cef9a0, node_mem_map c14ee000
  2281. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 992 pages used for mEmmap
  2282. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 0 pages reserved
  2283. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 105248 pages, LIFO batch:31
  2284. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 1048 pages used for memmap
  2285. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 103912 pages, LIFO batch:31
  2286. <6>[    0.000000] [0:        swapper:    0] allocating 12906496 bytes at c1cf0000 (420f0000 physical) for fb
  2287. <6>[    0.000000] [0:        swapper:    0] PERCPU: Embedded 8 pages/cpu @c2942000 s9888 r8192 d14688 u32768
  2288. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: s9888 r8192 d14688 u32768 alloc=8*4096
  2289. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: [0] 0 [0] 1
  2290. <4>[    0.000000] [0:        swapper:    0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 209160
  2291. <5>[    0.000000] [0:        swapper:    0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c10 console=null sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=f3ae2762 androidboot.baseband=csfb
  2292. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup)
  2293. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  2294. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg]buf_size = 0x100000
  2295. <4>[    0.000000] hw_rev_setup : HW rev value is intialized first
  2296. <4>[    0.000000] HW rev value : 0xD
  2297. <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  2298. <6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  2299. <6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  2300. <6>[    0.000000] Memory: 43MB 760MB 22MB = 825MB total
  2301. <5>[    0.000000] Memory: 802516k/802516k available, 159020k reserved, 419840K highmem
  2302. <5>[    0.000000] Virtual kernel memory layout:
  2303. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  2304. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  2305. <5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  2306. <5>[    0.000000]     vmalloc : 0xdf800000 - 0xfa000000   ( 424 MB)
  2307. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
  2308. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  2309. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  2310. <5>[    0.000000]       .init : 0xc0008000 - 0xc004c000   ( 272 kB)
  2311. <5>[    0.000000]       .text : 0xc0100000 - 0xc0b78208   (10721 kB)
  2312. <5>[    0.000000]       .data : 0xc0c00000 - 0xc0cf2488   ( 970 kB)
  2313. <5>[    0.000000]        .bss : 0xc0cf24ac - 0xc1351ee8   (6527 kB)
  2314. <6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  2315. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  2316. <6>[    0.000000] NR_IRQS:855
  2317. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  2318. <6>[    0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67656)
  2319. <6>[    0.150238] pid_max: default: 32768 minimum: 301
  2320. <6>[    0.150573] Security Framework initialized
  2321. <6>[    0.150604] SELinux:  Initializing.
  2322. <7>[    0.150665] SELinux:  Starting in permissive mode
  2323. <6>[    0.150848] Mount-cache hash table entries: 512
  2324. <6>[    0.152191] Initializing cgroup subsys cpuacct
  2325. <6>[    0.152282] Initializing cgroup subsys freezer
  2326. <6>[    0.152343] CPU: Testing write buffer coherency: ok
  2327. <6>[    0.152709] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  2328. <4>[    0.185272] CPU1: Booted secondary processor
  2329. <6>[    0.195159] Brought up 2 CPUs
  2330. <6>[    0.195159] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  2331. <6>[    0.210205] print_constraints: dummy:
  2332. <3>[    0.210296] rdev_init_debugfs: Error-Bad Function Input
  2333. <6>[    0.210632] NET: Registered protocol family 16
  2334. <3>[    0.210845] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  2335. <6>[    0.212921] (sec_get_lpm_mOde) 1a2b3c10
  2336. <0>[    0.212951] (sec_get_lpm_mode) 1
  2337. <0>[    0.212951] (sec_debug_init)
  2338. <0>[    0.212951] (sec_debug_init) reset_reason : 0x1a2b3c10
  2339. <6>[    0.212982] msm_rpm_init: RPM firmware 2.0.4196187
  2340. <6>[    0.213745] saw_probe: id=0, name=8901_s0
  2341. <6>[    0.214202] saw_probe: id=1, name=8901_s1
  2342. <6>[    0.215850] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  2343. <6>[    0.215911] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  2344. <6>[    0.215942] rcg_clk_handoff: sdc1_clk rate=48000000
  2345. <6>[    0.216003] rcg_clk_handoff: dsi_byte_clk rate=1
  2346. <6>[    0.216033] rcg_clk_handoff: mdp_clk rate=200000000
  2347. <6>[    0.216156] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  2348. <6>[    0.218170] Max ACPU freq: 1512000 KHz
  2349. <6>[    0.223999] CPU0: 23 scaling frequencies supported.
  2350. <6>[    0.224029] CPU1: 23 scaling frequencies supported.
  2351. <6>[    0.224273] msm8x60_init_mmc : skip sdcc2 config for lpm boot
  2352. <6>[    0.224395] msm8x60_init_mmc : skip sdcc5 config for lpm boot
  2353. <3>[    0.224395] LTE_switch_init!
  2354. <3>[    0.224456] LTE_switch_init end!
  2355. <6>[    0.225921] pm8058_probe: PMIC revision: E3
  2356. <6>[    0.227233] pm_gpio_probe: OK: base=173, ngpio=40
  2357. <6>[    0.227416] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  2358. <6>[    0.228759] pm8901_probe: PMIC REVISION = F4
  2359. <6>[    0.229187] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  2360. <6>[    0.244018] ram_console: got buffer at 77800000, size 100000
  2361. <6>[    0.244110] ram_console: found existing buffer, size 37153, start 37153
  2362. <6>[    0.361816] console [ram-1] enabled
  2363. <6>[    0.362274] msm8x60_init : skip charm devices for lpm boot
  2364. <3>[    0.363189] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  2365. <4>[    0.363861] tsp_power_init: MXT224 Power On skipped by LPM
  2366. <4>[    0.363922] brcm_wlan_init: start
  2367. <4>[    0.364135] brcm_init_wlan_mem: WIFI MEM Allocated
  2368. <6>[    0.382507] bio: create slab <bio-0> at 0
  2369. <6>[    0.383758] ION heap vmalloc created
  2370. <6>[    0.383941] ION heap mm created at 38800000 with size 3600000
  2371. <6>[    0.384033] ION heap mm_fw created at 38600000 with size 200000
  2372. <6>[    0.384246] ION heap mfc created at 3be00000 with size 2000
  2373. <6>[    0.384338] ION heap sf created at 78f00000 with size 4000000
  2374. <6>[    0.384521] ION heap camera_preview created at 7cf00000 with size 1200000
  2375. <6>[    0.384613] ION heap wb created at 7e100000 with size 1400000
  2376. <6>[    0.384796] ION heap qsecom created at 7f500000 with size 600000
  2377. <6>[    0.384918] ION heap audio created at 7fb00000 with size 4cf000
  2378. <5>[    0.385162] pmic8058_pwm_probe: OK
  2379. <5>[    0.385681] SCSI subsystem initialized
  2380. <6>[    0.385955] usbcore: registered new interface driver usbfs
  2381. <6>[    0.386169] usbcore: registered new interface driver hub
  2382. <6>[    0.386352] usbcore: registered new device driver usb
  2383. <6>[    0.386901] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  2384. <6>[    0.387176] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  2385. <6>[    0.387481] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  2386. <6>[    0.387786] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  2387. <6>[    0.388061] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  2388. <6>[    0.388366] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  2389. <6>[    0.388610] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  2390. <6>[    0.388946] Advanced Linux Sound Architecture Driver Version 1.0.24.
  2391. <6>[    0.389465] Bluetooth: Core ver 2.16
  2392. <6>[    0.389648] NET: Registered protocol family 31
  2393. <6>[    0.389709] Bluetooth: HCI device and connection manager initialized
  2394. <6>[    0.389862] Bluetooth: HCI socket layer initialized
  2395. <6>[    0.389923] Bluetooth: L2CAP socket layer initialized
  2396. <6>[    0.390167] Bluetooth: SCO socket layer initialized
  2397. <6>[    0.390716] cfg80211: Calling CRDA to update world regulatory domain
  2398. <6>[    0.390991] Switching to clocksource gp_timer
  2399. <6>[    0.409973] NET: Registered protocol family 2
  2400. <6>[    0.410186] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  2401. <6>[    0.410644] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  2402. <6>[    0.411529] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes!
  2403. <6>[    0.412597] TCP: Hash tables configured (established 65536 bind 65536)
  2404. <6>[    0.412750] TCP reno registered
  2405. <6>[    0.412841] UDP hash table entries: 256 (order: 1, 12288 bytes)
  2406. <6>[    0.412933] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  2407. <6>[    0.413452] NET: Registered protocol family 1
  2408. <6>[    0.413818] RPC: Registered named UNIX socket transport module.
  2409. <6>[    0.413970] RPC: Registered udp transport module.
  2410. <6>[    0.414062] RPC: Registered tcp transport module.
  2411. <6>[    0.414184] RPC: Registered tcp NFSv4.1 backchannel transport module.
  2412. <6>[    0.414459] Trying to unpack rootfs image as initramfs...
  2413. <6>[    0.454559] Freeing initrd memory: 948K
  2414. <6>[    0.454833] PMU: registered new PMU device of type 0
  2415. <6>[    0.455108] PMU: registered new PMU device of type 1
  2416. <6>[    0.455566] ETM/ETB intialized.
  2417. <6>[    0.455780] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  2418. <6>[    0.456207] pil_modem pil_modem: using secure boot
  2419. <6>[    0.456390] sdio_al:SDIO-AL SW version 1.30
  2420. <3>[    0.458557] smd_channel_probe_worker: allocation table not initialized
  2421. <6>[    0.462921] msm_dsps driver version 3.03.
  2422. <6>[    0.465576] lpa_if_init: lpa_if_ptr 0xde9d8e00   buf_vir 0xffdf0000   buf_phy 0x5e580000  buf_zise 65536
  2423. <3>[    0.467529] sec_switch_probe enter sec_switch_probe
  2424. <5>[    0.469512] msm_rpm_log_probe: OK
  2425. <3>[    0.469665] [BT] bcm4330_bluetooth_init
  2426. <3>[    0.470062] [BT] bcm4330_bluetooth_probe
  2427. <3>[    0.470397] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  2428. <3>[    0.470489] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  2429. <6>[    0.506164] sec_log_save_old: saved old log at 188758@dea80000
  2430. <6>[    0.510406] sec_getlog_supply_kloginfo: 0xc112a518
  2431. <6>[    0.510650] audit: initializing netlink socket (disabled)
  2432. <5>[    0.510833] type=2000 audit(0.470:1): initialized
  2433. <4[    0.595855] highmem bounce pool size: 64 pages
  2434. <6>[    0.596099] ashmem: initialized
  2435. <6>[    0.601959] exFAT: Core Version 1.2.4
  2436. <6>[    0.602081] exFAT: FS Version 1.2.4
  2437. <6>[    0.603912] NTFS driver 2.1.30 [Flags: R/W].
  2438. <6>[    0.604309] fuse init (API version 7.16)
  2439. <6>[    0.604980] msgmni has been set to 749
  2440. <7>[    0.605102] SELinux:  Registering netfilter hooks
  2441. <6>[    0.606872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  2442. <6>[    0.606994] io scheduler noop registered
  2443. <6>[    0.607147] io scheduler deadline registered (default)
  2444. <6>[    0.607269] io scheduler row registered
  2445. <6>[    0.607452] io scheduler cfq registered
  2446. <4>[    0.609710] mdp4_csc_config: Block type 10 isn't supported by CSC.
  2447. <4>[    0.609832] mdp4_csc_config: Block type 8 isn't supported by CSC.
  2448. <4>[    0.613708] ld9040 start lcdc_ld9040_panel_init
  2449. <4>[    0.613891] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  2450. <4>[    0.614044] ld9040 msm_fb_add_device START
  2451. <6>[    0.614135] setting pdata->panel_info.fb_num to 3. type: 0
  2452. <3>[    0.614318] msm_fb_add_device: msm_fb_device_alloc failed!
  2453. <4>[    0.614410] ld9040 msm_fb_add_device end
  2454. <4>[    0.614868] ld9040 platform_driver_register(&this_driver) is done
  2455. <4>[    0.614990] ld9040 LDI : EA8868, pixelclock 27400000
  2456. <6>[    0.615356] setting pdata->panel_info.fb_num to 3. type: 3
  2457. <6>[    0.618194] mdp4_lcdc_vsync_init: ndx=0
  2458. <6>[    0.620452] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  2459. <6>[    0.620635] is_lpcharging_state: is_lpm_boot:1
  2460. <6>[    0.620727] [lpm-mode] skip init logo!
  2461. <7>[    0.621215] Registered led device: lcd-backlight
  2462. <6>[    0.621368] mdp4_lcdc_vsync_init: ndx=0
  2463. <6>[    0.621582] sec_getlog_supply_fbinfo: 0x420f0000 480 800 32 2
  2464. <4>[    0.621673] ld9040 platform_device_register(&this_device) is done
  2465. <6>[    0.622253] hdmi_msm hdmi_msm.0: probe
  2466. <6>[    0.622680] hdmi_msm hdmi_msm.1: probe
  2467. <6>[    0.622802] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  2468. <6>[    0.623046] setting pdata->panel_info.fb_num to 1. type: 7
  2469. <6>[    0.623840] mdp4_dtv_vsync_init: ndx=0
  2470. <6>[    0.625946] FrameBuffer[1] 1920x1080 size=4149248 byteq is registered successfully!
  2471. <6>[    0.626342] mdp4_dtv_vsync_init: ndx=0
  2472. <6>[    0.626617] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group debcb808
  2473. <6>[    0.626739] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  2474. <6>[    0.626922] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  2475. <7>[    0.627258] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  2476. <6>[    0.628204]
  2477. <6>[    0.628234]  msm_vidc_enc: Inside vid_enc_init()
  2478. <6>[    0.628662]
  2479. <6>[    0.628662]  msm_vidc_enc: Inside vid_enc_vcd_init()
  2480. <6>[    0.628936] is_lpcharging_state: is_lpm_boot:1
  2481. <6>[    0.629150] sii9234_init : LPM Charging Mode! return 0
  2482. <6>[    0.629608] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  2483. <6>[    0.630004] msm_serial_hs module loaded
  2484. <6>[    0.630187] msm_serial_hsl: detected port #1
  2485. <6>[    0.630432] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  2486. <6>[    0.630706] msm_serial_hsl: detected port #0
  2487. <6>[    0.630920] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  2488. <6>[    0.631256] msm_serial_hsl: driver initialized
  2489. <6>[    0.632476] msm_rotator_probe: rotator_hw_revision=1
  2490. <6>[    0.637969] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  2491. <6>[    0.639373] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  2492. <6>[    0.640411] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  2493. <6>[    0.646514] brd: module loaded
  2494. <6>[    0.649230] loop: module loaded
  2495. <6>[    0.649627] is_lpcharging_state: is_lpm_boot:1
  2496. <6>[    0.649719] akm8975_init : LPM Charging Mode! return 0
  2497. <6>[    0.649810] is_lpcharging_state: is_lpm_boot:1
  2498. <6>[    0.649993] k3dh_init : LPM Charging Mode! return 0
  2499. <6>[    0.650177] sec_jack:sec_jack_probe : Registering jack driver
  2500. <6>[    0.650512] input: sec_jack as /devices/virtual/input/input0
  2501. <5>[    0.651397] pm8xxx_upl_probe: OK
  2502. <3>[    0.652343] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  2503. <4>[    0.652709] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  2504. <4>[    0.653137] THNAK YOU!!
  2505. <6>[    0.653259] vibrator I2C attach success!!!
  2506. <4>[    0.653411] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  2507. <4>[    0.673950] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  2508. <6>[    0.674804] is_lpcharging_state: is_lpm_boot:1
  2509. <6>[    0.674957] a2220_init : LPM Charging Mode! return 0
  2510. <4>[    0.675201] level device init
  2511. <6>[    0.680175] adie_codec_register_codec_operations: codec type 1
  2512. <6>[    0.680755] Loading pn544 driver
  2513. <6>[    0.680908] pn544_probe : IRQ num 628
  2514. <6>[    0.681091] pn544_probe : requesting IRQ 628
  2515. <6>[    0.681945] SCSI Media Changer driver v0.25
  2516. <6>[    0.682342] PPP generic driver version 2.4.2
  2517. <6>[    0.682556] PPP Deflate Compression module registered
  2518. <6>[    0.682739] PPP BSD Compression module registered
  2519. <6>[    0.683441] PPP MPPE Compression module registered
  2520. <6>[    0.683624] NET: Registered protocol family 24
  2521. <6>[    0.683715] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  2522. <6>[    0.683898] CSLIP: code copyright 1989 Regents of the University of California.
  2523. <6>[    0.684478] tun: Universal TUN/TAP device driver, 1.6
  2524. <6>[    0.684600] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  2525. <6>[    0.685272] smsc911x: Driver version 2008-10-21
  2526. <6>[    0.685546] usbcore: registered new interface driver asix
  2527. <6>[    0.685760] usbcore: registered new interface driver cdc_ether
  2528. <6>[    0.685882] usbcore: registered new interface driver net1080
  2529. <6>[    0.686065] usbcore: registered new interface driver cdc_subset
  2530. <6>[    0.686218] usbcore: registered new interface driver zaurus
  2531. <6>[    0.686370] cdc_ncm: 04-Aug-2011
  2532. <6>[    0.686523] usbcore: registered new interface driver cdc_ncm
  2533. <6>[    0.686614] rmnet_init: SMD devices[8]
  2534. <6>[    0.690246] rmnet_init: SDIO devices[8]
  2535. <3>[    0.693115] msm_hsusb_smb328a_vbus_power attached 0
  2536. <6>[    0.695251] msm_otg msm_otg: success to host_notify_dev_register
  2537. <6>[    0.695495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  2538. <6>[    0.695922] host driver registered w/ tranceiver
  2539. <6>[    0.696136] usbcore: registered new interface driver cdc_acm
  2540. <6>[    0.696258] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  2541. <6>[    0.696472] usbcore: registered new interface driver usblp
  2542. <6>[    0.696624] Initializing USB Mass Storage driver...
  2543. <6>[    0.696777] usbcore: registered new interface driver usb-storage
  2544. <6>[    0.696929] USB Mass Storage support registered.
  2545. <6>[    0.697052] usbcore: registered new interface driver ums-alauda
  2546. <6>[    0.697265] usbcore: registered new interface driver ums-cypress
  2547. <6>[    0.697387] usbcore: registered new interface driver ums-datafab
  2548. <6>[    0.697601] usbcore: registered new interface driver ums-freecom
  2549. <6>[    0.697723] usbcore: registered new interface driver ums-isd200
  2550. <6>[    0.697937] usbcore: registered new interface driver ums-jumpshot
  2551. <6>[    0.698089] usbcore: registered new interface driver ums-karma
  2552. <6>[    0.698272] usbcore: registered new interface driver ums-onetouch
  2553. <6>[    0.698425] usbcore: registered new interface driver ums-sddr09
  2554. <6>[    0.698608] usbcore: registered new interface driver ums-sddr55
  2555. <6>[    0.698760] usbcore: registered new interface driver ums-usbat
  2556. <6>[    0.698974] usbcore: registered new interface driver usb_ehset_test
  2557. <6>[    0.699340] peripheral driver registered w/ tranceiver
  2558. <4>[    0.699523] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  2559. <6>[    0.701446] android_usb gadget: Mass Storage Function, version: 2009/09/11
  2560. <6>[    0.701629] android_usb gadget: Number of LUNs=2
  2561. <6>[    0.701721]  lun0: LUN: removable file: (no medium)
  2562. <6>[    0.701904]  lun1: LUN: removable file: (no medium)
  2563. <6>[    0.702209] android_usb gadget: android_usb ready
  2564. <6>[    0.703582] DIAG registered SDIO device
  2565. <6>[    0.703826] diagchar initialized now
  2566. <6>[    0.704162] mousedev: PS/2 mouse device common for all mice
  2567. <6>[    0.705444] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input1
  2568. <6>[    0.705993] is_lpcharging_state: is_lpm_boot:1
  2569. <6>[    0.706115] mxt224_init : LPM Charging Mode! return ENODEV!
  2570. <6>[    0.706481] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input2
  2571. <6>[    0.706756] [sweep2wake]: set device pmic8xxx_pwrkey
  2572. <6>[    0.708160] using rtc device, pm8xxx_rtc, for alarms
  2573. <6>[    0.708282] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  2574. <6>[    0.708709] i2c /dev entries driver
  2575. <6>[    0.710144] is_lpcharging_state: is_lpm_boot:1
  2576. <6>[    0.710235] yda165_init : LPM Charging Mode! return 0
  2577. <6>[    0.710388] is_lpcharging_state: is_lpm_boot:1
  2578. <6>[    0.710479] gp2a_opt_init : LPM Charging Mode! return 0
  2579. <6>[    0.710662] is_lpcharging_state: is_lpm_boot:1
  2580. <6>[    0.710754] lightsensor_init : LPM Charging Mode! return 0
  2581. <6>[    0.711120] input: fsa9480 as /devices/i2c-5/5-0025/input/input3
  2582. <6>[    0.713958] fsa9480 5-0025:  fsa9480_reg_init dev ID: 0x0
  2583. <4>[    0.714233] i2c-core: driver [fsa9480] using legacy resume method
  2584. <6>[    0.714385] is_lpcharging_state: is_lpm_boot:1
  2585. <6>[    0.714538] k3g_init : LPM Charging Mode! return 0
  2586. <6>[    0.715179] input: orientation_sensor as /devices/virtual/input/input4
  2587. <6>[    0.715576] lirc_dev: IR Remote Control driver registered, major 239
  2588. <6>[    0.715698] IR NEC protocol handler initialized
  2589. <6>[    0.715850] IR RC5(x) protocol handler initialized
  2590. <6>[    0.715942] IR RC6 protocol handler initialized
  2591. <6>[    0.716033] IR JVC protocol handler initialized
  2592. <6>[    0.716217] IR Sony protocol handler initialized
  2593. <6>[    0.716308] IR RC5 (streamzap) protocol handler initialized
  2594. <6>[    0.716461] IR LIRC bridge handler initialized
  2595. <6>[    0.716552] Linux video capture interface: v2.00
  2596. <6>[    0.716766] usbcore: registered new interface driver uvcvideo
  2597. <6>[    0.716918] USB Video Class driver (v1.1.0)
  2598. <6>[    0.717559] is_lpcharging_state: is_lpm_boot:1
  2599. <6>[    0.717742] sec_m5mo_init : LPM Charging Mode! return 0
  2600. <6>[    0.717834] is_lpcharging_state: is_lpm_boot:1
  2601. <6>[    0.717987] sec_s5k5bafx_camera_init : LPM Charging Mode! return 0
  2602. <4>[    0.718109] [Torch] ledflash_init
  2603. <6>[    0.718383] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  2604. <6>[    0.718749] max17040_probe: MAX17043 driver Loading!
  2605. <6>[    0.718872] max17040_get_version :
  2606. <6>[    0.719757] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  2607. <6>[    0.720581] max17040_get_rcomp : current rcomp = 0xc71f(199)
  2608. <6>[    0.721862] max17040_get_rcomp : current rcomp = 0xc71f(199)
  2609. <4>[    0.725311] i2c-core: driver [max17040] using legacy suspend method
  2610. <4>[    0.725494] i2c-core: driver [max17040] using legacy resume method
  2611. <6>[    0.725646] smb328a_probe: SMB328A driver Loading!
  2612. <6>[    0.725830] is_lpcharging_state: is_lpm_boot:1
  2613. <6>[    0.725921] smb328a_probe : is lpm charging mode (1)
  2614. <6>[    0.727233] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  2615. <6>[    0.728881] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  2616. <4>[    0.729492] i2c-core: driver [smb328a] using legacy suspend method
  2617. <4>[    0.729614] i2c-core: driver [smb328a] using legacy resume method
  2618. <6>[    0.730224] msm_adc successfully registered
  2619. <5>[    0.730773] tsens_tm_probe: OK
  2620. <3>[    0.731079] pm8xxx_init_adc: adc_channel_open() failed.
  2621. <3>[    0.731170] pm8xxx_tm_probe: Unable to initialize adc
  2622. <4>[    0.731292] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  2623. <6>[    0.731842] pm8xxx_tm_probe: OK
  2624. <6>[    0.732360] device-mapper: uevent: version 1.0.3
  2625. <6>[    0.732849] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  2626. <6>[    0.733093] Bluetooth: HCI UART driver ver 2.2
  2627. <6>[    0.733245] Bluetooth: HCI H4 protocol initialized
  2628. <6>[    0.733337] Bluetooth: HCI_IBS protocol initialized
  2629. <6>[    0.733520] Bluetooth: BlueSleep Mode Driver Ver 1.1
  2630. <6>[    0.734100] cpuidle: using governor ladder
  2631. <6>[    0.734191] cpuidle: using governor menu
  2632. <6>[    0.734680] mmc0: mci-version: 0
  2633. <3>[    0.734863] mmc0: No card detect facilities available
  2634. <6>[    0.735198] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  2635. <6>[    0.735382] mmc0: 8 bit data mode enabled
  2636. <6>[    0.735565] mmc0: 4 bit data mode disabled
  2637. <6>[    0.735656] mmc0: polling status mode disabled
  2638. <6>[    0.735748] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2639. <6>[    0.735900] mmc0: Slot eject status = 0
  2640. <6>[    0.736022] mmc0: Power save feature enable = 1
  2641. <6>[    0.736175] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d820000
  2642. <6>[    0.736267] mmc0: DM cmd busaddr 0x5d820000, cmdptr busaddr 0x5d837f40
  2643. <6>[    0.736694] mmc1: mci-version: 0
  2644. <6>[    0.737670] mmc1: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  2645. <6>[    0.737884] mmc1: 8 bit data mode disabled
  2646. <6>[    0.737976] mmc1: 4 bit data mode enabled
  2647. <6>[    0.738067] mmc1: polling status mode disabled
  2648. <6>[    0.738220] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2649. <6>[    0.738342] mmc1: Slot eject status = 0
  2650. <6>[    0.738494] mmc1: Power save feature enable = 1
  2651. <6>[    0.738586] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d840000
  2652. <6>[    0.738739] mmc1: DM cmd busaddr 0x5d840000, cmdptr busaddr 0x5d857f40
  2653. <6>[    0.739105] mmc2: mci-version: 0
  2654. <3>[    0.739318] mmc2: No card detect facilities available
  2655. <6>[    0.739624] mmc2: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  2656. <6>[    0.739807] mmc2: 8 bit data mode disabled
  2657. <6>[    0.739929] mmc2: 4 bit data mode enabled
  2658. <6>[    0.740020] mmc2: polling status mode disabled
  2659. <6>[    0.740173] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  2660. <6>[    0.740264] mmc2: Slot eject status = 0
  2661. <6>[    0.740417] mmc2: Power save feature enable = 1
  2662. <6>[    0.740539] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d860000
  2663. <6>[    0.740692] mmc2: DM cmd busaddr 0x5d860000, cmdptr busaddr 0x5d877f40
  2664. <7>[    0.741363] Registered led device: camera:flash0
  2665. <7>[    0.741607] Registered led device: camera:flash1
  2666. <6>[    0.743316] usbcore: registered new interface driver usbhid
  2667. <6>[    0.743469] usbhid: USB HID core driver
  2668. <6>[    0.743957] logger: created 512K log 'log_main'
  2669. <6>[    0.744110] logger: created 256K log 'log_events'
  2670. <6>[    0.744354] logger: created 512K log 'log_radio'
  2671. <6>[    0.744537] logger: created 256K log 'log_system'
  2672. <6>[    0.744628] sec_getlog_supply_loggerinfo: 0xc11c52c0 0xc12452c0 0xc12c52c0 0xc13052c0
  2673. <6>[    0.745819] zram: Created 2 device(s) ...
  2674. <6>[    0.746307] usbcore: registered new interface driver snd-usb-audio
  2675. <6>[    0.747192] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  2676. <6>[    0.747528] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  2677. <6>[    0.747802] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  2678. <6>[    0.748718] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  2679. <6>[    0.749938] ALSA device list:
  2680. <6>[    0.750030]   #0: msm-audio
  2681. <6>[    0.750457] oprofile: using arm/armv7-scorpionmp
  2682. <6>[    0.750762] GACT probability NOT on
  2683. <6>[    0.750854] Mirror/redirect action on
  2684. <6>[    0.750946] u32 classifier
  2685. <6>[    0.751037]     Actions configured
  2686. <6>[    0.751190] Netfilter messages via NETLINK v0.30.
  2687. <6>[    0.751434] nf_conntrack version 0.5.0 (12554 buckets, 50216 max)
  2688. <6>[    0.752044] ctnetlink v0.93: registering with nfnetlink.
  2689. <6>[    0.752197] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  2690. <6>[    0.752349] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  2691. <6>[    0.752868] xt_time: kernel timezone is -0000
  2692. <6>[    0.753204] ip_tables: (C) 2000-2006 Netfilter Core Team
  2693. <6>[    0.753570] arp_tables: (C) 2002 David S. Miller
  2694. <6>[    0.753784] TCP cubic registered
  2695. <6>[    0.753875] Initializing XFRM netlink socket
  2696. <6>[    0.754486] NET: Registered protocol family 10
  2697. <6>[    0.756439] Mobile IPv6
  2698. <6>[    0.756561] ip6_tables: (C) 2000-2006 Netfilter Core Team
  2699. <6>[    0.756805] IPv6 over IPv4 tunneling driver
  2700. <6>[    0.757873] NET: Registered protocol family 17
  2701. <6>[    0.757995] NET: Registered protocol family 15
  2702. <6>[    0.758239] Bluetooth: RFCOMM TTY layer initialized
  2703. <6>[    0.758422] Bluetooth: RFCOMM socket layer initialized
  2704. <6>[    0.758514] Bluetooth: RFCOMM ver 1.11
  2705. <6>[    0.758666] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  2706. <6>[    0.758789Ý Bluetooth: BNEP filters: protocol multicast
  2707. <6>[    0.758941] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  2708. <6>[    0.759185] NET: Registered protocol family 35
  2709. <5>[    0.759399] Registering the dns_resolver key type
  2710. <6>[    0.759582] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  2711. <5>[    0.759857] Registering SWP/SWPB emulation handler
  2712. <6>[    0.830352] clock_late_init() disabled 202 unused clocks
  2713. <6>[    0.835510] MSM Watchdog Initialized
  2714. <3>[    0.836273] set_dload_mode <0> ( C0016B04 )
  2715. <4>[    0.837097] [TKEY] touchkey_init START
  2716. <6>[    0.837219] is_lpcharging_state: is_lpm_boot:1
  2717. <6>[    0.837371] touchkey_init : LPM Charging Mode! return ENODEV!
  2718. <6>[    0.838592] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-11-17 00:48:49 UTC (1447721329)
  2719. <6>[    0.838928] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  2720. <6>[    0.839569] sec_bat_get_lpcharging_state: LP charging:1
  2721. <3>[    0.840515] sec_bat_polling_work: adc work already on a queue
  2722. <4>[    0.841552] ------------[ cut here ]------------
  2723. <4>[    0.841644] WARNING: at ../../../../../../kernel/samsung/msm8660/fs/proc/generic.c:586 proc_register+0x150/0x1ac()
  2724. <4>[    0.841827] proc_dir_entry '/proc/last_kmsg' already registered
  2725. <3>[    0.841949] [fg] p:9164, s1:97, s2:100, v:4156250, t:0
  2726. <4>[    0.842071] Modules linked in:
  2727. <4>[    0.842254] [<c010a798>] (unwind_backtrace+0x0/0xe0) from [<c018a02c>] (warn_slowpath_common+0x4c/0x64)
  2728. <4>[    0.842437] [<c018a02c>] (warn_slowpath_common+0x4c/0x64) from [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c)
  2729. <4>[    0.842620] [<c018a070>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0270f80>] (proc_register+0x150/0x1ac)
  2730. <4>[    0.842834] [<c0270f80>] (proc_register+0x150/0x1ac) from [<c0271364>] (create_proc_entry+0x70/0x90)
  2731. <4>[    0.843017] [<c0271364>] (create_proc_entry+0x70/0x90) from [<c00309b8>] (ram_console_late_init+0x24/0x70)
  2732. <4>[    0.843200] [<c00309b8>] (ram_console_late_init+0x24/0x70) from [<c0100408>] (do_one_initcall+0x8c/0x150)
  2733. <4>[    0.843414] [<c0100408>] (do_one_initcall+0x8c/0x150) from [<c00089b8>] (kernel_init+0x9c/0x144)
  2734. <4>[    0.843597] [<c00089b8>] (kernel_init+0x9c/0x144) from [<c0105bfc>] (kernel_thread_exit+0x0/0x8)
  2735. <4>[    0.843780] ---[ end trace f606c0be06f1ada7 ]---
  2736. <4>[    0.844024] Warning: unable to open an initial console.
  2737. <6>[    0.844421] Freeing init memory: 272K
  2738. <5>[    0.846588] init: init started!
  2739. <3>[    0.847747] SELinux:  policydb version 30 does not match my version range 15-26
  2740. <3>[    0.848052] init: SELinux:  Could not load policy:  Invalid argument
  2741. <3>[    0.848327] init: failed to load policy: Invalid argument
  2742. <3>[    0.848449] init: Security failure; rebooting into recovery mode...
  2743. <6>[    0.848693] SysRq : Emergency Remount R/O
  2744. <4>[    0.848907] Emergency Remount complete
  2745. <0>[    0.849334] (sec_debug_set_upload_magic) 0
  2746. <3>[    0.849578] set_dload_mode <0> ( C01741C4 )
  2747. <6>[    0.850341] pn544_shutdown
  2748. <4>[    0.850921] ld9040 start ld9040_shutdown
  2749. <4>[    0.851074] ld9040 lcdc_ld9040_panel_off +  (0,0,0)
  2750. <4>[    0.851165] ld9040 lcdc_ld9040_panel_off -
  2751. <6>[    0.852447] disable_charging_before_reset: check voltage(4156250)
  2752. <6>[    0.852600] smb328a 15-0034: smb328a_disable_charging :
  2753. <6>[    0.852844] mmc0: new high speed MMC card at address 0001
  2754. <6>[    0.853057] smb328a 15-0034: smb328a_disable_charging : reg (0x31) = 0x2d
  2755. <6>[    0.853363] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  2756. <6>[    0.853668] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  2757. <6>[    0.853851] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  2758. <6>[    0.853912] smb328a_disable_charging : => reg (0x31) = 0xb9
  2759. <6>[    0.858581]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
  2760. <6>[    0.863677]  mmcblk0boot1: unknown partition table
  2761. <6>[    0.865875]  mmcblk0boot0: unknown partition table
  2762. <6>[    0.871459] pmic8058_xoadc:The offset for AMUX calibrationwas -573
  2763. <4>[    0.926361] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
  2764. <6>[    0.926483] [OTG] msm_otg_start_peripheral, on = 1
  2765. <7>[    0.952880] gpio_request: gpio-251 (SD_WP_Switch) status -22
  2766. <3>[    0.953002] msm_sdc3_get_wpswitch:Failed to request GPIO 251
  2767. <4>[    0.953155] mmc1: host does not support reading read-only switch. assuming write-enable.
  2768. <6>[    0.955169] mmc1: new high speed SDHC card at address 0001
  2769. <6>[    0.955627] mmcblk1: mmc1:0001 00000 29.2 GiB
  2770. <6>[    0.958099]  mmcblk1: p1
  2771. <6>[    1.151611] usb_reset: usb: notify offline
  2772. <7>[    1.151733] usb: composite_disconnect
  2773. <7>[    1.151824] usb: android_disconnect schedule_work
  2774. <7>[    1.152313] usb: android_work config=  (null),connected=0,sw_connected=0
  2775. <6>[    1.152435] android_work: did not send uevent (0 0   (null))
  2776. <6>[    1.355438] disable_charging_before_reset: check voltage(4167500) after disable charging.
  2777. <4>[    1.355773] Disabling non-boot CPUs ...
  2778. <4>[    1.356048] set_freq_limit: 0x8 0, min 384000, max 1242000
  2779. <0>[    1.358642] Restarting system with command 'recovery'.
  2780. <4>[    1.358825]
  2781. <0>[    1.358917] Restarting Linux version 3.0.101-slim-gaf5480c (nospamdan@bacon) (gcc version 4.8 (GCC) ) #1 SMP PREEMPT Mon Nov 16 21:32:41 CET 2015
  2782. <0>[    1.359008]
  2783. [0] ========================================
  2784. [0] welcome to lk
  2785. [0] Original Log Magic = 0x4d474f4c
  2786. [0] calling constructors
  2787. [0] initializing heap
  2788. [0] initializing threads
  2789. [0] initializing dpc
  2790. [0] initializing timers
  2791. [0] creating bootstrap completion thread
  2792. [0] creating bootstrap progress monitor thread
  2793. [10] top of bootstrap3()
  2794. [10] top of bootstrap2()
  2795. [10] initializing platform
  2796. [10] initializing target
  2797. [380] calling apps_init()
  2798. [390] aboot_init()
  2799. [390] aboot_banner()
  2800. [410] power on reason = 0x100, msm watchdog status = 0x4
  2801. [610] aboot_check_rtc_alarm_boot()
  2802. [610] aboot_dev_init()
  2803. [610] init_microusb_ic()
  2804. [0] ========================================
  2805. [0] welcome to lk
  2806. [0] Original Log Magic = 0x4d474f4c
  2807. [0] calling constructors
  2808. [0] initializing heap
  2809. [0] initializing threads
  2810. [0] initializing dpc
  2811. [0] initializing timers
  2812. [0] creating bootstrap completion thread
  2813. [0] creating bootstrap progress monitor thread
  2814. [10] top of bootstrap3()
  2815. [10] top of bootstrap2()
  2816. [10] initializing platform
  2817. [10] initializing target
  2818. [380] calling apps_init()
  2819. [390] aboot_init()
  2820. [390] aboot_banner()
  2821. [410] power on reason = 0x100, msm watchdog status = 0x4
  2822. [610] aboot_check_rtc_alarm_boot()
  2823. [610] aboot_dev_init()
  2824. [610] init_microusb_ic()
  2825. [1410] init_microusb_ic success1
  2826. [1410] init_microusb_ic success2
  2827. [1410] smb328a_init_charger : log(1)
  2828. [1410] smb328a_init_charger : log(2)
  2829. [1420] smb328a_init_charger : is_reboot_mode = 0, vcell = 4071
  2830. [1420] check valid dcin (0x33) = 0x0
  2831. [1420] no dcin, skip init_charger
  2832. [1430] battery pole check!
  2833. [1440] fuelguage : soc = 91%, vcell = 4071mV
  2834. [1450] fuelguage : rcomp(c71f) ==?? 0xc71f
  2835. [1460] 9519 = ( 407100 - 300886 ) * 8963 / 100000
  2836. [1990] HW_REV = 0xd
  2837. [1990] reboot_mode = 0x82d8454b
  2838. [1990] debuglevel = 0x574f4c44
  2839. [1990] do key check
  2840. [2010] VolUp & VolDown - RECOVERYMODE_BY_KEY
  2841. [2010] aboot_check_lpm : rb = 0, chg = 0, av = 0
  2842. [2020] get mpp11 state (2) = 1
  2843. [2030] enter normal booting mode
  2844. [2040] boot_linux_from_mmc()
  2845. [3590] kernel  @ 40408000 (5213784 bytes)
  2846. [3590] ramdisk @ 41800000 (3701785 bytes)
  2847. [3590] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13'
  2848. [3590] Booting Linux
  2849. [3590] boot_linux()
  2850. [3610] booting linux @ 0x40408000, ramdisk @ 0x41800000 (3701785)
  2851. [3610] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_cïnsole_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13
  2852. [3610] entry()
  2853. <6>[    0.657836] sec_log_save_old: saved old log at 224947@de180000
  2854. <6>[    0.000000] [0:        swapper:    0] Booting Linux on physical CPU 0
  2855. <6>[    0.000000] [0:        swapper:    0] Initializing cgroup subsys cpu
  2856. <5>[    0.000000] [0:        swapper:    0] Linux version 3.0.89-cyanogenmod-g722be10 (dees_troy@ded1.ktechnology.net) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Wed Mar 25 09:31:16 UTC 2015
  2857. <4>[    0.000000] [0:        swapper:    0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  2858. <4>[    0.000000] [0:        swapper:    0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  2859. <4>[    0.000000] [0:        swapper:    0] Machine: QCT MSM8X60 FUSION FFA
  2860. <6>[    0.000000] [0:        swapper:    0] memory pool 0 (start 38000000 size 600000) initialized
  2861. <6>[    0.000000] [0:        swapper:    0] memory pool 1 (start 38600000 size 3802000) initialized
  2862. <6>[    0.000000] [0:        swapper:    0] memory pool 3 (start 78f00000 size 7100000) initialized
  2863. <4>[    0.000000] [0:        swapper:    0] Memory policy: ECC disabled, Data cache writealloc
  2864. <6>[    0.000000] [0:        swapper:    0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0,  hw_plat_ver=65536
  2865. <6>[    0.000000] [0:        swapper:    0]  accessory_chip=0 hw_plat_subtype=0
  2866. <6>[    0.000000] [0:        swapper:    0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  2867. <7>[    0.000000] [0:        swapper:    0] On node 0 totalpages: 211200
  2868. <7>[    0.000000] [0:        swapper:    0] free_area_init_node: node 0, pgdat c0bf08a0, node_mem_map c1788000
  2869. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 992 pages used for memmap
  2870. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 0 pages reserved
  2871. <7>[    0.000000] [0:        swapper:    0]   Normal zone: 105248 pages, LIFO batch:31
  2872. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 1048 pages used for memmap
  2873. <7>[    0.000000] [0:        swapper:    0]   HighMem zone: 103912 pages, LIFO batch:31
  2874. <6>[    0.000000] [0:        swapper:    0] allocating 12906496 bytes at c7c00000 (48000000 physical) for fb
  2875. <6>[    0.000000] [0:        swapper:    0] PERCPU: Embedded 8 pages/cpu @c8852000 s10112 r8192 d14464 u32768
  2876. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: s10112 r8192 d14464 u32768 alloc=8*4096
  2877. <7>[    0.000000] [0:        swapper:    0] pcpu-alloc: [0] 0 [0] 1
  2878. <4>[    0.000000] [0:        swapper:    0] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 209160
  2879. <5>[    0.000000] [0:        swapper:    0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.serialno=f3ae2762 androidboot.baseband=csfb
  2880. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup)
  2881. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
  2882. <0>[    0.000000] [0:        swapper:    0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  2883. <4>[    0.000000] hw_rev_setup : HW rev value is intialized first
  2884. <4>[    0.000000] HW rev value : 0xD
  2885. <6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  2886. <6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  2887. <6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  2888. <6>[    0.000000] Memory: 43MB 760MB 22MB = 825MB total
  2889. <5>[    0.000000] Memory: 800876k/800876k available, 160660k reserved, 419840K highmem
  2890. <5>[    0.000000] Virtual kernel memory layout:
  2891. <5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  2892. <5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  2893. <5>[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
  2894. <5>[    0.000000]     vmalloc : 0xdf800000 - 0xfa000000   ( 424 MB)
  2895. <5>[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
  2896. <5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  2897. <5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  2898. <5>[    0.000000]       .init : 0xc0008000 - 0xc004d000   ( 276 kB)
  2899. <5>[    0.000000]       .text : 0xc0100000 - 0xc0a791d4   (9701 kB)
  2900. <5>[    0.000000]       .data : 0xc0b00000 - 0xc0bf2fa0   ( 972 kB)
  2901. <5>[    0.000000]        .bss : 0xc0bf2fc4 - 0xc125152°   (6522 kB)
  2902. <6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  2903. <6>[    0.000000] Preemptible hierarchical RCU implementation.
  2904. <6>[    0.000000] NR_IRQS:855
  2905. <6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  2906. <6>[    0.000000] Console: colour dummy device 80x30
  2907. <6>[    0.150177] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67655)
  2908. <6>[    0.150207] pid_max: default: 32768 minimum: 301
  2909. <6>[    0.150573] Security Framework initialized
  2910. <6>[    0.150604] SELinux:  Initializing.
  2911. <7>[    0.150665] SELinux:  Starting in permissive mode
  2912. <6>[    0.150848] Mount-cache hash table entries: 512
  2913. <6>[    0.152252] Initializing cgroup subsys cpuacct
  2914. <6>[    0.152374] Initializing cgroup subsys freezer
  2915. <6>[    0.152435] CPU: Testing write buffer coherency: ok
  2916. <6>[    0.152770] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  2917. <4>[    0.185394] CPU1: Booted secondary processor
  2918. <6>[    0.195281] Brought up 2 CPUs
  2919. <6>[    0.195312] SMP: Total of 2 processors activated (27.06 BogoMIPS).
  2920. <6>[    0.210449] print_constraints: dummy:
  2921. <3>[    0.210571] rdev_init_debugfs: Error-Bad Function Input
  2922. <6>[    0.210906] NET: Registered protocol family 16
  2923. <3>[    0.211120] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  2924. <6>[    0.213378] (sec_get_lpm_mode) 1a2b3c00
  2925. <0>[    0.213378] (sec_get_lpm_mode) 0
  2926. <0>[    0.213409] (sec_debug_init)
  2927. <0>[    0.213409] (sec_debug_init) reset_reason : 0x1a2b3c00
  2928. <6>[    0.213439] msm_rpm_init: RPM firmware 2.0.4196187
  2929. <6>[    0.214202] saw_probe: id=0, name=8901_s0
  2930. <6>[    0.214691] saw_probe: id=1, name=8901_s1
  2931. <6>[    0.216308] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  2932. <6>[    0.216369] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  2933. <6>[    0.216400] rcg_clk_handoff: sdc1_clk rate=48000000
  2934. <6>[    0.216461] rcg_clk_handoff: dsi_byte_clk rate=1
  2935. <6>[    0.216522] rcg_clk_handoff: mdp_clk rate=200000000
  2936. <6>[    0.216613] rcg_clk_handoff: pixel_mdp_clk rate=27400000
  2937. <6>[    0.218658] ACPU PVS: Slow
  2938. <6>[    0.218658] Max ACPU freq: 1512000 KHz
  2939. <6>[    0.224609] CPU0: 23 scaling frequencies supported.
  2940. <6>[    0.224639] CPU1: 23 scaling frequencies supported.
  2941. <3>[    0.225189] LTE_switch_init!
  2942. <3>[    0.225250] LTE_switch_init end!
  2943. <6>[    0.226684] pm8058_probe: PMIC revision: E3
  2944. <6>[    0.228027] pm_gpio_probe: OK: base=173, ngpio=40
  2945. <6>[    0.228240] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  2946. <6>[    0.229583] pm8901_probe: PMIC REVISION = F4
  2947. <6>[    0.230010] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  2948. <6>[    0.244812] ram_console: got buffer at 77800000, size 100000
  2949. <6>[    0.244903] ram_console: found existing buffer, size 31056, start 31056
  2950. <6>[    0.355285] console [ram-1] enabled
  2951. <3>[    0.356750] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  2952. <3>[    0.357360] msm_snddev_init
  2953. <3>[    0.357818] msm_snddev_init snd_devices_celox - config
  2954. <4>[    0.368377] [TSP] Power Down S to discharge for unexpected leackage current
  2955. <6>[    0.368835] msm8x60_multi_sdio_slot_status_irq: MDM2AP_SYNC Status = 1
  2956. <4>[    0.368988] [TKEY] tkey_device_init: 8901_lvs2 On
  2957. <4>[    0.369598] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
  2958. <4>[    0.369720] brcm_wlan_init: start
  2959. <4>[    0.369812] brcm_init_wlan_mem: WIFI MEM Allocated
  2960. <6>[    0.389251] bio: create slab <bio-0> at 0
  2961. |6>[    0.390716] ION heap vmalloc created
  2962. <6>[    0.390808] ION heap mm created at 38800000 with size 3600000
  2963. <6>[    0.390960] ION heap mm_fw created at 38600000 with size 200000
  2964. <6>[    0.391082] ION heap mfc created at 3be00000 with size 2000
  2965. <6>[    0.391235] ION heap sf created at 78f00000 with size 4000000
  2966. <6>[    0.391357] ION heap camera_preview created at 7cf00000 with size 1200000
  2967. <6>[    0.391510] ION heap wb created at 7e100000 with size 1400000
  2968. <6>[    0.391601] ION heap qsecom created at 7f500000 with size 600000
  2969. <6>[    0.391754] ION heap audio created at 7fb00000 with size 4cf000
  2970. <5>[    0.392089] pmic8058_pwm_probe: OK
  2971. <5>[    0.392761] SCSI subsystem initialized
  2972. <6>[    0.393035] usbcore: registered new interface driver usbfs
  2973. <6>[    0.393218] usbcore: registered new interface driver hub
  2974. <6>[    0.393402] usbcore: registered new device driver usb
  2975. <6>[    0.393920] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  2976. <6>[    0.394165] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  2977. <6>[    0.394470] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  2978. <6>[    0.394714] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  2979. <6>[    0.395050] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  2980. <6>[    0.395294] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  2981. <6>[    0.395629] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  2982. <6>[    0.395996] Advanced Linux Sound Architecture Driver Version 1.0.24.
  2983. <6>[    0.396575] Bluetooth: Core ver 2.16
  2984. <6>[    0.396697] NET: Registered protocol family 31
  2985. <6>[    0.396820] Bluetooth: HCI device and connection manager initialized
  2986. <6>[    0.396881] Bluetooth: HCI socket layer initialized
  2987. <6>[    0.397003] Bluetooth: L2CAP socket layer initialized
  2988. <6>[    0.397247] Bluetooth: SCO socket layer initialized
  2989. <6>[    0.397857] cfg80211: Calling CRDA to update world regulatory domain
  2990. <6>[    0.398132] Switching to clocksource gp_timer
  2991. <6>[    0.418884] NET: Registered protocol family 2
  2992. <6>[    0.419097] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  2993. <6>[    0.419494] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  2994. <6>[    0.420288] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
  2995. <6>[    0.421325] TCP: Hash tables configured (established 65536 bind 65536)
  2996. <6>[    0.421417] TCP reno registered
  2997. <6>[    0.421539] UDP hash table entries: 256 (order: 1, 12288 bytes)
  2998. <6>[    0.421630] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
  2999. <6>[    0.422180] NET: Registered protocol family 1
  3000. <6>[    0.422546] RPC: Registered named UNIX socket transport module.
  3001. <6>[    0.422668] RPC: Registered udp transport module.
  3002. <6>[    0.422729] RPC: Registered tcp transport module.
  3003. <6>[    0.422821] RPC: Registered tcp NFSv4.1 backchannel transport module.
  3004. <6>[    0.423156] Trying to unpack rootfs image as initramfs...
  3005. <6>[    0.590606] Freeing initrd memory: 3612K
  3006. <6>[    0.591033] PMU: registered new PMU device of type 0
  3007. <6>[    0.591339] PMU: registered new PMU device of type 1
  3008. <6>[    0.591888] ETM/ETB intialized.
  3009. <6>[    0.592071] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  3010. <6>[    0.592590] pil_modem pil_modem: using secure boot
  3011. <6>[    0.592895] sdio_al:SDIO-AL SW version 1.30
  3012. <3>[    0.595886] smd_channel_probe_worker: allocation table not initialized
  3013. <6>[    0.602508] msm_dsps driver version 3.03.
  3014. <6>[    0.608428] lpa_if_init: lpa_if_ptr 0xde9b0c00   buf_vir 0xffdf0000   buf_phy 0x5e560000  buf_zise 65536
  3015. <6>[    0.609375] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
  3016. <3>[    0.611022] sec_switch_probe enter sec_switch_probe
  3017. <6>[    0.611816] charm_modem_probe: Registering charm modem
  3018. <5>[    0.614166] msm_rpm_log_probe: OK
  3019. <3>[    0.614410] [BT] bcm4330_bluetooth_init
  3020. <3>[    0.614898] [BT] bcm4330_bluetooth_probe
  3021. <3>[    0.615325] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
  3022. <3>[    0.615417] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
  3023. <6>[    0.657836] sec_log_save_old: saved old log at 224947@de180000
  3024. <6>[    0.662231] sec_getlog_supply_kloginfo: 0xc102b03c
  3025. <6>[    0.662475] audit: initializing netlink socket (disabled)
  3026. <5>[    0.662658] type=2000 audit(0.640:1): initialized
  3027. <4>[    0.745330] highmem bounce pool size: 64 pages
  3028. <6>[    0.745605] ashmem: initialized
  3029. <6>[    0.753143] fuse init (API version 7.16)
  3030. <6>[    0.753540] msgmni has been set to 751
  3031. <7>[    0.753662] SELinux:  Registering netfilter hooks
  3032. <6>[    0.755432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  3033. <6>[    0.755554] io scheduler noop registered
  3034. <6>[    0.755676] io scheduler deadline registered (default)
  3035. <6>[    0.755767] io scheduler row registered
  3036. <6>[    0.755981] io scheduler cfq registered
  3037. <4>[    0.758544] mdp4_csc_config: Block type 10 isn't supported by CSC.
  3038. <4>[    0.758636] mdp4_csc_config: Block type 8 isn't supported by CSC.
  3039. <4>[    0.762817] ld9040 start lcdc_ld9040_panel_init
  3040. <4>[    0.763000] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
  3041. <4>[    0.763153] ld9040 msm_fb_add_device START
  3042. <6>[    0.763244] setting pdata->panel_info.fb_num to 3. type: 0
  3043. <3>[    0.763397] msm_fb_add_device: msm_fb_device_alloc failed!
  3044. <4>[    0.763488] ld9040 msm_fb_add_device end
  3045. <4>[    0.764007] ld9040 platform_driver_register(&this_driver) is done
  3046. <4>[    0.764129] ld9040 LDI : EA8868, pixelclock 27400000
  3047. <6>[    0.764556] setting pdata->panel_info.fb_num to 3. type: 3
  3048. <6>[    0.767395] mdp4_lcdc_vsync_init: ndx=0
  3049. <3>[    0.769805] pm_runtime: fail to wake up
  3050. <4>[    0.769836] [kmj] lcdc_LD9040_panel_power:enable:1
  3051. <4>[    0.770935] ld9040 lcdc_ld9040_panel_on  +  (0,0,0)
  3052. <4>[    0.770965] ld9040 : lcdc_config_gpios [1]
  3053. <4>[    0.770965] ld9040 start spi_init
  3054. <4>[    0.770996] ld9040 clk : 103, cs : 104, sdi : 106
  3055. <4>[    0.771026] ld9040 start ld9040_disp_powerup
  3056. <4>[    0.828826] ld9040 start ld9040_disp_on - HW Rev: 13
  3057. <4>[    0.959167] ld9040 ld9040_read_lcd_id: a1 3 22
  3058. <4>[    0.959167] ld9040 lcd EA8868 M3
  3059. <4>[    1.022552] ld9040 ACL_cutoff_set Percentage : 40!!
  3060. <4>[    1.023895] ld9040 ea8868_gamma_ctl 18 18
  3061. <4>[    1.024017] ld9040 lcdc_ld9040_panel_on  -  (1,1,1)
  3062. <4>[    1.025451] mdp4_csc_config: Block type 10 isn't supported by CSC.
  3063. <4>[    1.025482] mdp4_csc_config: Block type 8 isn't supported by CSC.
  3064. <6>[    1.049377] Console: switching to colour frame buffer device 60x50
  3065. <6>[    1.067504] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
  3066. <6>[    1.067657] is_lpcharging_state: is_lpm_boot:0
  3067. <4>[    1.067810] load_565rle_image: Can not open /initlogo.rle
  3068. <7>[    1.068328] Registered led device: lcd-backlight
  3069. <6>[    1.068450] mdp4_lcdc_vsync_init: ndx=0
  3070. <6>[    1.068634] sec_getlog_supply_fbinfo: 0x48000000 480 800 32 2
  3071. <4>[    1.068817] ld9040 platform_device_register(&this_device) is done
  3072. <6>[    1.069396] hdmi_msm hdmi_msm.0: probe
  3073. <6>[    1.070098] hdmi_msm hdmi_msm.1: probe
  3074. <6>[    1.070220] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  3075. <6>[    1.070465] setting pdata->panel_info.fb_num to 1. type: 7
  3076. <6>[    1.071258] mdp4_dtv_vsync_init: ndx=0
  3077. <6>[    1.075256] FrameBuffer[1] 1920x1080 size=8294400 bytes is registered successfully!
  3078. <6>[    1.075714] mdp4_dtv_vsync_init: ndx=0
  3079. <6>[    1.075927] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group de309c08
  3080. <6>[    1.076110] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  3081. <6>[    1.076263] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  3082. <7>[    1.076599] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  3083. <6>[    1.077728]
  3084. <6>[    1.077728]  msm_vidc_enc: Inside vid_enc_init()
  3085. <6>[    1.078094]
  3086. <6>[    1.078094]  msm_vidc_enc: Inside vid_enc_vcd_init()
  3087. <6>[    1.078308] is_lpcharging_state: is_lpm_boot:0
  3088. <6>[    1.078674] mhl_v2, Board : get_mhl_int_irq, rev:13
  3089. <6>[    1.078948] create mhl sysfile
  3090. <6>[    1.079437] input: sii9234_rcp as /devices/virtual/input/input0
  3091. <6>[    1.157165] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  3092. <6>[    1.157928] msm_serial_hs module loaded
  3093. <6>[    1.158172] msm_serial_hsl: detected port #1
  3094. <6>[    1.158325] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  3095. <6>[    1.158996] msm_serial_hsl: detected port #0
  3096. <6>[    1.159179] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  3097. <6>[    1.159393] msm_serial_hsl: console setup on port #0
  3098. <6>[    2.524078] console [ttyHSL0] enabled
  3099. <6>[    2.528320] msm_serial_hsl: driver initialized
  3100. <6>[    2.533325] msm_rotator_probe: rotator_hw_revision=1
  3101. <6>[    2.543579] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  3102. <6>[    2.551635] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  3103. <6>[    2.559265] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  3104. <6>[    2.571960] brd: module loaded
  3105. <6>[    2.576812] loop: module loaded
  3106. <6>[    2.579376] is_lpcharging_state: is_lpm_boot:0
  3107. <4>[    2.583496] ak8975 probe start!
  3108. <4>[    2.587615] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
  3109. <4>[    2.595275] ak8975 probe success!
  3110. <6>[    2.597778] is_lpcharging_state: is_lpm_boot:0
  3111. <4>[    2.602142] k3dh probe start!!
  3112. <4>[    2.605133] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
  3113. <4>[    2.613098] k3dh probe success!!
  3114. <6>[    2.616088] sec_jack:sec_jack_probe : Registering jack driver
  3115. <6>[    2.621826] input: sec_jack as /devices/virtual/input/input1
  3116. <5>[    2.628082] pm8xxx_upl_probe: OK
  3117. <3>[    2.631561] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  3118. <6>[    2.638580] is_lpcharging_state: is_lpm_boot:0
  3119. <6>[    2.642639] a2220_init
  3120. <4>[    2.645263] i2c-core: driver [audience_a2220] using legacy suspend method
  3121. <4>[    2.651733] i2c-core: driver [audience_a2220] using legacy resume method
  3122. <4>[    2.658691] level device init
  3123. <4>[    2.666625] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664
  3124. <4>[    2.672637] audience_a2220 :a2220_ioctl: creating thread..
  3125. <4>[    2.678131] init_a2220 -
  3126. <4>[    2.680694] audience_a2220 :a2220_init_thread
  3127. <6>[    2.685089] adie_codec_register_codec_operations: codec type 1
  3128. <6>[    2.691375] Loading pn544 driver
  3129. <6>[    2.694091] pn544_probe : IRQ num 620
  3130. <6>[    2.697937] pn544_probe : requesting IRQ 628
  3131. <6>[    2.720031] SCSI Media Changer driver v0.25
  3132. <6>[    2.723815] PPP generic driver version 2.4.2
  3133. <6>[    2.727874] PPP Deflate Compression module registered
  3134. <6>[    2.749114] PPP BSD Compression module registered
  3135. <6>[    2.754516] PPP MPPE Compression module registered
  3136. <6>[    2.758361] NET: Registered protocol family 24
  3137. <6>[    2.762847] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  3138. <6>[    2.772491] CSLIP: code copyright 1989 Regents of the University of California.
  3139. <6>[    2.780120] tun: Universal TUN/TAP device driver, 1.6
  3140. <6>[    2.784790] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  3141. <6>[    2.791900] smsc911x: Driver version 2008-10-21
  3142. <6>[    2.795806] usbcore: registered new interface driver asix
  3143. <6>[    2.800933] usbcore: registered new interface driver cdc_ether
  3144. <6>[    2.806762] usbcore: registered new interface driver net1080
  3145. <6>[    2.812377] usbcore: registered new interface driver cdc_subset
  3146. <4>[    2.818054] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
  3147. <6>[    2.824981] usbcore: registered new interface driver zaurus
  3148. <6>[    2.830535] cdc_ncm: 04-Aug-2011
  3149. <6>[    2.833709] usbcore: registered new interface driver cdc_ncm
  3150. <6>[    2.839385] rmnet_init: SMD devices[8]
  3151. <6>[    2.847412] rmnet_init: SDIO devices[8]
  3152. <3>[    2.852966] msm_hsusb_smb328a_vbus_power attached 0
  3153. <6>[    2.858917] msm_otg msm_otg: success to host_notify_dev_register
  3154. <6>[    2.864196] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  3155. <6>[    2.870819] host driver registered w/ tranceiver
  3156. <6>[    2.875305] usbcore: registered new interface driver cdc_acm
  3157. <4>[    2.879119] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
  3158. <6>[    2.887451] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  3159. <4>[    2.887481] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
  3160. <4>[    2.902160] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
  3161. <6>[    2.902221] usbcore: registered new interface driver usblp
  3162. <6>[    2.902252] Initializing USB Mass Storage driver...
  3163. <6>[    2.902313] usbcore: registered new interface driver usb-storage
  3164. <6>[    2.902343] USB Mass Storage support registered.
  3165. <6>[    2.902404] usbcore: registered new interface driver ums-alauda
  3166. <6>[    2.902465] usbcore: registered new interface driver ums-cypress
  3167. <6>[    2.902526] usbcore: registered new interface driver ums-datafab
  3168. <6>[    2.902618] usbcore: registered new interface driver ums-freecom
  3169. <6>[    2.902679] usbcore: registered new interface driver ums-isd200
  3170. <6>[    2.902740] usbcore: registered new interface driver ums-jumpshot
  3171. <6>[    2.902801] usbcore: registered new interface driver ums-karma
  3172. <6>[    2.902862] usbcore: registered new interface driver ums-onetouch
  3173. <6>[    2.902923] usbcore: registered new interface driver ums-sddr09
  3174. <6>[    2.903015] usbcore: registered new interface driver ums-sddr55
  3175. <6>[    2.903076] usbcore: registered new interface driver ums-usbat
  3176. <6>[    2.903137] usbcore: registered new interface driver usb_ehset_test
  3177. <6>[    2.903442] peripheral driver registered w/ tranceiver
  3178. <4>[    2.903503] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  3179. <4>[    3.011840] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
  3180. <6>[    3.018554] a2220_bootup_init: starting to load image (2459 passes)...
  3181. <6>[    3.025085] android_usb gadget: Mass Storage Function, version: 2009/09/11
  3182. <6>[    3.031951] android_usb gadget: Number of LUNs=2
  3183. <6>[    3.036468]  lun0: LUN: removable file: (no medium)
  3184. <6>[    3.041412]  lun1: LUN: removable file: (no medium)
  3185. <6>[    3.046630] android_usb gadget: android_usb ready
  3186. <6>[    3.052703] DIAG registered SDIO device
  3187. <6>[    3.055847] diagchar initialized now
  3188. <6>[    3.059356] mousedev: PS/2 mouse device common for all mice
  3189. <6>[    3.066314] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
  3190. <6>[    3.075378] is_lpcharging_state: is_lpm_boot:0
  3191. <3>[    3.079040] [TSP] mxt224_probe  
  3192. <6>[    3.082427] input: sec_touchscreen as /devices/virtual/input/input3
  3193. <4>[    3.088836] mxt224_power_on: enter
  3194. <3>[    3.092315] [TSP POWER ON L1 3.3 enable
  3195. <3>[    3.096221] [TSP POWER ON  L4 1.8 enable
  3196. <4>[    3.099670] mxt224_power_on: exit
  3197. <4>[    3.129058] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
  3198. <3>[    3.133636] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  3199. <6>[    3.140441] msm_otg_suspend: usb in low power mode
  3200. <4>[    3.159027] mxt224_power_on is finished
  3201. <6>[    3.203155] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
  3202. <3>[    3.210479] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
  3203. <3>[    3.241790] [TSP] TSP chip is MXT224-E
  3204. <3>[    3.245239] [TSP]user_info_value is 0
  3205. <3>[    3.348968] [TSP] ta_status is 0
  3206. <3>[    3.351074] [TSP] mxt224_ta_probe
  3207. <3>[    3.363250] [TSP]TA_probe MXT224E T48 Byte2 is 114
  3208. <3>[    3.369323] [TSP]calibration success!!!
  3209. <3>[    3.372650] [TSP] mxt224_probe   e
  3210. <3>[    3.375640] [TSP] Calibration End!!!!!!
  3211. <3>[    3.379241] [TSP] Clearing unused slots
  3212. <6>[    3.383666] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
  3213. <3>[    3.394317] [TSP] Calibration End!!!!!!
  3214. <3>[    3.397003] [TSP] Clearing unused slots
  3215. <6>[    3.402221] using rtc device, pm8xxx_rtc, for alarms
  3216. <3>[    3.406097] [TSP] Calibration!!!!!!
  3217. <6>[    3.409667] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  3218. <6>[    3.416931] i2c /dev entries driver
  3219. <3>[    3.420074] [TSP] Calibration End!!!!!!
  3220. <3>[    3.423736] [TSP] Clearing unused slots
  3221. <6>[    3.430175] is_lpcharging_state: is_lpm_boot:0
  3222. <6>[    3.433715] yda165:yda165_ilit
  3223. <6>[    3.436737] yda165:yda165_probe
  3224. <3>[    3.439819] yda165:yda165_probe
  3225. <5>[    3.442932] yda165_probe: OK
  3226. <6>[    3.446105] yda165:load_ampgain completed
  3227. <6>[    3.449920] is_lpcharging_state: is_lpm_boot:0
  3228. <4>[    3.454437] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
  3229. <6>[    3.462005] input: proximity_sensor as /devices/virtual/input/input5
  3230. <4>[    3.468505] opt_i2c_probe(839):
  3231. <3>[    3.471343] opt_i2c_probe, 840 : start!!!
  3232. <4>[    3.475311] GP2A opt i2c attach success!!!
  3233. <3>[    3.479461] GP2A opt i2c attach success!!!
  3234. <3>[    3.483489] opt_i2c_probe, 859 : end!!!
  3235. <4>[    3.487365] opt_i2c_client : (0xdea26200)
  3236. <4>[    3.491821] opt_i2c_write(497): : 0x4, 0x2
  3237. <4>[    3.495361] gp2a_opt_probe is OK!!
  3238. <6>[    3.499328] is_lpcharging_state: is_lpm_boot:0
  3239. <6>[    3.504119] input: light_sensor as /devices/virtual/input/input6
  3240. <6>[    3.509887] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
  3241. <6>[    3.518005] fsa9480 5-0025:  fsa9480_reg_init dev ID: 0x0
  3242. <4>[    3.522735] i2c-core: driver [fsa9480] using legacy resume method
  3243. <6>[    3.528656] is_lpcharging_state: is_lpm_boot:0
  3244. <4>[    3.533020] [GYRO] k3g_probe start!
  3245. <4>[    3.536499] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
  3246. <6>[    3.544555] input: gyro_sensor as /devices/virtual/input/input8
  3247. <6>[    3.551544] input: orientation_sensor as /devices/virtual/input/input9
  3248. <6>[    3.557556] lirc_dev: IR Remote Control driver registered, major 239
  3249. <6>[    3.563659] IR NEC protocol handler initialized
  3250. <6>[    3.568054] IR RC5(x) protocol handler initialized
  3251. <6>[    3.572906] IR RC6 protocol handler initialized
  3252. <6>[    3.577362] IR JVC protocol handler initialized
  3253. <6>[    3.581878] IR Sony protocol handler initialized
  3254. <6>[    3.586517] IR RC5 (streamzap) protocol handler initialized
  3255. <6>[    3.592041] IR LIRC bridge handler initialized
  3256. <6>[    3.596496] Linux video capture interface: v2.00
  3257. <6>[    3.601165] usbcore: registered new interface driver uvcvideo
  3258. <6>[    3.606842] USB Video Class driver (v1.1.0)
  3259. <6>[    3.611999] is_lpcharging_state: is_lpm_boot:0
  3260. <4>[    3.615600] ############# M5MO probe ##############
  3261. <7>[    3.620544] [M5MO] m5mo_sensor_probe : E
  3262. <7>[    3.624267] [M5MO] m5mo_i2c_init : E
  3263. <7>[    3.627838] [M5MO] m5mo_i2c_probe : E
  3264. <7>[    3.631530] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
  3265. <7>[    3.631561]
  3266. <6>[    3.639282] is_lpcharging_state: is_lpm_boot:0
  3267. <4>[    3.642974] ############# S5K5BAFX probe ##############
  3268. <7>[    3.648315] [5BAFX] s5k5bafx_sensor_probe : E
  3269. <7>[    3.652435] [5BAFX] s5k5bafx_i2c_init : E
  3270. <7>[    3.656372] [5BAFX] s5k5bafx_i2c_probe : E
  3271. <7>[    3.660461] [5BAFX] s5k5bafx_i2c_probe : X
  3272. <3>[    3.664611] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
  3273. <6>[    3.670806] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  3274. <6>[    3.677581] max17040_probe: MAX17043 driver Loading!
  3275. <6>[    3.682128] max17040_get_version :
  3276. <6>[    3.686279] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
  3277. <6>[    3.691589] max17040_get_rcomp : current rcomp = 0xc71f(199)
  3278. <6>[    3.697601] max17040_get_rcomp : current rcomp = 0xc71f(199)
  3279. <4>[    3.705993] i2c-core: driver [max17040] using legacy suspend method
  3280. <4>[    3.711395] i2c-core: driver [max17040] using legacy resume method
  3281. <6>[    3.717620] smb328a_probe: SMB328A driver Loading!
  3282. <6>[    3.722351] is_lpcharging_state: is_lpm_boot:0
  3283. <6>[    3.728057] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  3284. <6>[    3.735656] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  3285. <4>[    3.742248] i2c-core: driver [smb328a] using legacy suspend method
  3286. <4>[    3.747894] i2c-core: driver [smb328a] using legacy resume method
  3287. <6>[    3.754638] msm_adc successfully registered
  3288. <5>[    3.758819] tsens_tm_probe: OK
  3289. <3>[    3.761383] pm8xxx_init_adc: adc_channel_open() failed.
  3290. <3>[    3.766326] pm8xxx_tm_probe: Unable to initialize adc
  3291. <4>[    3.771423] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  3292. <6>[    3.777526] pm8xxx_tm_probe: OK
  3293. <6>[    3.780822] device-mapper: uevent: version 1.0.3
  3294. <6>[    3.785430] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  3295. <6>[    3.793548] Bluetooth: HCI UART driver ver 2.2
  3296. <6>[    3.797729] Bluetooth: HCI H4 protocol initialized
  3297. <6>[    3.802520] Bluetooth: HCI_IBS protocol initialized
  3298. <6>[    3.807434] Bluetooth: BlueSleep Mode Driver Ver 1.1
  3299. <6>[    3.813140] cpuidle: using governor ladder
  3300. <6>[    3.816467] cpuidle: using governor menu
  3301. <6>[    3.820892] mmc0: mci-version: 0
  3302. <3>[    3.823608] mmc0: No card detect facilities available
  3303. <6>[    3.829132] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  3304. <6>[    3.836791] mmc0: 8 bit data mode enabled
  3305. <6>[    3.840850] mmc0: 4 bit data mode disabled
  3306. <6>[    3.844879] mmc0: polling status mode disabled
  3307. <6>[    3.849365] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  3308. <6>[    3.854949] mmc0: Slot eject status = 0
  3309. <6>[    3.858764] mmc0: Power save feature enable = 1
  3310. <6>[    3.863342] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d940000
  3311. <6>[    3.869873] mmc0: DM cmd busaddr 0x5d940000, cmdptr busaddr 0x5d957f40
  3312. <6>[    3.876678] mmc1: mci-version: 0
  3313. <6>[    3.880004] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
  3314. <6>[    3.887908] mmc1: 8 bit data mode enabled
  3315. <6>[    3.891845] mmc1: 4 bit data mode disabled
  3316. <6>[    3.895965] mmc1: polling status mode disabled
  3317. <6>[    3.900360] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  3318. <6>[    3.906036] mmc1: Slot eject status = 0
  3319. <6>[    3.909820] mmc1: Power save feature enable = 1
  3320. <6>[    3.914306] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d960000
  3321. <6>[    3.920989] mmc1: DM cmd busaddr 0x5d960000, cmdptr busaddr 0x5d977f40
  3322. <6>[    3.927673] mmc2: mci-version: 0
  3323. <6>[    3.931243] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  3324. <6>[    3.939147] mmc2: 8 bit data mode disabled
  3325. <6>[    3.943115] mmc2: 4 bit data mode enabled
  3326. <6>[    3.945861] mmc0: new high speed MMC card at address 0001
  3327. <6>[    3.952606] mmc2: polling status mode disabled
  3328. <6>[    3.952606] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  3329. <6>[    3.961486] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  3330. <6>[    3.961517] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  3331. <6>[    3.972991] mmc2: Slot eject status = 0
  3332. <6>[    3.973022] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  3333. <6>[    3.982666] mmc2: Power save feature enable = 1
  3334. <6>[    3.986358]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
  3335. <6>[    3.998687] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d980000
  3336. <6>[    4.005249] mmc2: DM cmd busaddr 0x5d980000, cmdptr busaddr 0x5d997f40
  3337. <6>[    4.006835]  mmcblk0boot1: unknown partition table
  3338. <6>[    4.016784] mmc3: mci-version: 0
  3339. <3>[    4.019897] mmc3: No card detect facilities available
  3340. <6>[    4.021362]  mmcblk0boot0: unknown partition table
  3341. <6>[    4.029937] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  3342. <6>[    4.037750] mmc3: 8 bit data mode disabled
  3343. <6>[    4.041900] mmc3: 4 bit data mode enabled
  3344. <6>[    4.045837] mmc3: polling status mode disabled
  3345. <6>[    4.050262] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  3346. <6>[    4.055938] mmc3: Slot eject status = 0
  3347. <6>[    4.059722] mmc3: Power save feature enable = 1
  3348. <6>[    4.064270] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d9c0000
  3349. <6>[    4.070831] mmc3: DM cmd busaddr 0x5d9c0000, cmdptr busaddr 0x5d9d7f40
  3350. <6>[    4.077636] mmc4: mci-version: 0
  3351. <6>[    4.080993] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
  3352. <6>[    4.088958] mmc4: 8 bit data mode disabled
  3353. <6>[    4.092956] mmc4: 4 bit data mode enabled
  3354. <6>[    4.096954] mmc4: polling status mode disabled
  3355. <6>[    4.101379] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  3356. <6>[    4.107025] mmc4: Slot eject status = 0
  3357. <6>[    4.110900] mmc4: Power save feature enable = 1
  3358. <6>[    4.115356] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d9e0000
  3359. <6>[    4.122009] mmc4: DM cmd busaddr 0x5d9e0000, cmdptr busaddr 0x5d9f7f40
  3360. <7>[    4.129241] Registered led device: camera:flash0
  3361. <7>[    4.133178] Registered led device: camera:flash1
  3362. <6>[    4.139404] usbcore: registered new interface driver usbhid
  3363. <6>[    4.144073] usbhid: USB HID core driver
  3364. <6>[    4.150512] logger: created 512K log 'log_main'
  3365. <6>[    4.154235] logger: created 256K log 'log_events'
  3366. <6>[    4.159057] logger: created 512K log 'log_radio'
  3367. <6>[    4.163543] logger: created 256K log 'log_system'
  3368. <6>[    4.168121] sec_getlog_supply_loggerinfo: 0xc10c3d00 0xc1143d00 0xc11c3d00 0xc1203d00
  3369. <6>[    4.176269] zram: num_devices not specified. Using default: 1
  3370. <6>[    4.181671] zram: Creating 1 devices ...
  3371. <6>[    4.186096] zcache: using lzo compressor
  3372. <6>[    4.189666] zcache: cleancache enabled using kernel transcendent memory and compression buddies
  3373. <6>[    4.198669] usbcore: registered new interface driver snd-usb-audio
  3374. <6>[    4.205505] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  3375. <7>[    4.206268] gpio_request: gpio-251 (SD_WP_Switch) status -22
  3376. <3>[    4.206298] msm_sdc3_get_wpswitch:Failed to request GPIO 251
  3377. <4>[    4.206329] mmc2: host does not support reading read-only switch. assuming write-enable.
  3378. <6>[    4.208251] mmc2: new high speed SDHC card at address 0001
  3379. <6>[    4.236968] mmcblk1: mmc2:0001 00000 29.2 GiB
  3380. <6>[    4.237274] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  3381. <6>[  ` 4.237579] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  3382. <6>[    4.257619] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  3383. <6>[    4.264434] ALSA device list:
  3384. <6>[    4.266448]  mmcblk1: p1
  3385. <6>[    4.268981]   #0: msm-audio
  3386. <6>[    4.272460] oprofile: using arm/armv7-scorpionmp
  3387. <6>[    4.276458] GACT probability NOT on
  3388. <6>[    4.279876] Mirror/redirect action on
  3389. <6>[    4.283508] u32 classifier
  3390. <6>[    4.286132]     Actions configured
  3391. <6>[    4.289550] Netfilter messages via NETLINK v0.30.
  3392. <6>[    4.294342] nf_conntrack version 0.5.0 (12570 buckets, 50280 max)
  3393. <6>[    4.300750] ctnetlink v0.93: registering with nfnetlink.
  3394. <6>[    4.305694] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  3395. <6>[    4.312561] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  3396. <6>[    4.319091] xt_time: kernel timezone is -0000
  3397. <6>[    4.322906] ip_tables: (C) 2000-2006 Netfilter Core Team
  3398. <6>[    4.328247] arp_tables: (C) 2002 David S. Miller
  3399. <6>[    4.332672] TCP cubic registered
  3400. <6>[    4.335784] Initializing XFRM netlink socket
  3401. <6>[    4.340606] NET: Registered protocol family 10
  3402. <6>[    4.346252] Mobile IPv6
  3403. <6>[    4.347778] ip6_tables: (C) 2000-2006 Netfilter Core Team
  3404. <6>[    4.353363] IPv6 over IPv4 tunneling driver
  3405. <6>[    4.358276] NET: Registered protocol family 17
  3406. <6>[    4.361877] NET: Registered protocol family 15
  3407. <6>[    4.366363] Bluetooth: RFCOMM TTY layer initialized
  3408. <6>[    4.371063] Bluetooth: RFCOMM socket layer initialized
  3409. <6>[    4.376220] Bluetooth: RFCOMM ver 1.11
  3410. <6>[    4.379913] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  3411. <6>[    4.385253] Bluetooth: BNEP filters: protocol multicast
  3412. <4>[    4.386901] mmc4: host doesn't support card's voltages
  3413. <3>[    4.386932] mmc4: error -22 whilst initialising SDIO card
  3414. <4>[    4.388397] mmc4: host doesn't support card's voltages
  3415. <3>[    4.388427] mmc4: error -22 whilst initialising MMC card
  3416. <6>[    4.411376] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  3417. <6>[    4.417358] NET: Registered protocol family 35
  3418. <5>[    4.421844] Registering the dns_resolver key type
  3419. <6>[    4.426361] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  3420. <5>[    4.434112] Registering SWP/SWPB emulation handler
  3421. <6>[    4.450164] clock_late_init() disabled 185 unused clocks
  3422. <6>[    4.459014] MSM Watchdog Initialized
  3423. <3>[    4.462341] set_dload_mode <0> ( C00170A4 )
  3424. <4>[    4.466857] [TKEY] touchkey_init START
  3425. <6>[    4.469818] is_lpcharging_state: is_lpm_boot:0
  3426. <4>[    4.475158] [TKEY] touchkey_init F/W version: 0x12, Module version:0x22, HW_REV: 0xd
  3427. <4>[    4.482116] [TKEY] sec i2c_touchkey_probe
  3428. <6>[    4.486114] input: sec_touchkey as /devices/virtual/input/input10
  3429. <4>[    4.492645] [TKEY] enter touchkey_auto_calibration
  3430. <3>[    4.518920] param_sec_operation: filp_open failed. (-2)
  3431. <3>[    4.523254] sec_open_param PARAM OPEN FAIL
  3432. <3>[    4.527282] sec_switch_init_work error value = 3
  3433. <4>[    4.539947] [TKEY] after touchkey_auto_calibration result = 1
  3434. <4>[    4.544952] [TKEY] touchkey_init END
  3435. <6>[    4.549041] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-11-17 00:49:18 UTC (1447721358)
  3436. <6>[    4.557312] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  3437. <6>[    4.564819] sec_bat_get_lpcharging_state: LP charging:0
  3438. <3>[    4.570495] sec_bat_polling_work: adc work already on a queue
  3439. <3>[    4.576507] [fg] p:9148, s1:97, s2:100, v:4021250, t:0
  3440. <4>[    4.580963] ------------[ cut here ]------------
  3441. <4>[    4.585357] WARNING: at /home/dees_troy/cm10.2/kernel/samsung/msm8660-common/fs/proc/generic.c:586 proc_register+0x14c/0x1ac()
  3442. <4>[    4.596740] proc_dir_entry '/proc/last_kmsg' already registered
  3443. <4>[    4.602569] Modules linked in:
  3444. <4>[    4.605621] [<c010a9e4>] (unwind_backtrace+0x0/0xe0) from [<c018af6c>] (warn_slowpath_common+0x4c/0x64)
  3445. <4>[    4.615051] [<c018af6c>] (warn_slowpath_common+0x4c/0x64) from [<c018b004>] (warn_slowpath_fmt+0x2c/0x3c)
  3446. <6>[    4.615447] pmic8058_xoadc:The offset for AMUX calibrationwas -568
  3447. <4>[    4.615966] ------------[ cut here ]------------
  3448. <4>[    4.615997] WARNING: at /home/dees_troy/cm10.2/kernel/samsung/msm8660-common/kernel/irq/manage.c:421 enable_irq+0x60/0x70()
  3449. <4>[    4.616058] Unbalanced enable for IRQ 505
  3450. <4>[    4.616088] Modules linked in:
  3451. <4>[    4.616088] [<c010a9e4>] (unwind_backtrace+0x0/0xe0) from [<c018af6c>] (warn_slowpath_common+0x4c/0x64)
  3452. <4>[    4.616149] [<c018af6c>] (warn_slowpath_common+0x4c/0x64) from [<c018b004>] (warn_slowpath_fmt+0x2c/0x3c)
  3453. <4>[    4.616210] [<c018b004>] (warn_slowpath_fmt+0x2c/0x3c) from [<c01d04a8>] (enable_irq+0x60/0x70)
  3454. <4>[    4.616271] [<c01d04a8>] (enable_irq+0x60/0x70) from [<c047f304>] (pm8058_xoadc_configure+0x400/0x43c)
  3455. <4>[    4.616333] [<c047f304>] (pm8058_xoadc_configure+0x400/0x43c) from [<c047f3c0>] (pm8058_xoadc_select_chan_and_start_conv+0x80/0xa8)
  3456. <4>[    4.616394] [<c047f3c0>] (pm8058_xoadc_select_chan_and_start_conv+0x80/0xa8) from [<c05968e4>] (msm_adc_wq_work+0x58/0x1d4)
  3457. <4>[    4.616455] [<c05968e4>] (msm_adc_wq_work+0x58/0x1d4) from [<c01a4334>] (process_one_work+0x228/0x434)
  3458. <4>[    4.616516] [<c01a4334>] (process_one_work+0x228/0x434) from [<c01a489c>] (worker_thread+0x19c/0x2bc)
  3459. <4>[    4.616577] [<c01a489c>] (worker_thread+0x19c/0x2bc) from [<c01a81f0>] (kthread+0x7c/0x88)
  3460. <4>[    4.616607] [<c01a81f0>] (kthread+0x7c/0x88) from [<c0105e80>] (kernel_thread_exit+0x0/0x8)
  3461. <4>[    4.616668] ---[ end trace 76a20dd62cf172d7 ]---
  3462. <4>[    4.752929] [<c018b004>] (warn_slowpath_fmt+0x2c/0x3c) from [<c0272344>] (proc_register+0x14c/0x1ac)
  3463. <6>[    4.752990] sec_jack:sec_jack_det_irq_handler : ready = 1.
  3464. <6>[    4.753021] sec_jack: ear micbias off
  3465. <4>[    4.771148] [<c0272344>] (proc_register+0x14c/0x1ac) from [<c0272668>] (create_proc_entry+0x70/0x8c)
  3466. <4>[    4.780303] [<c0272668>] (create_proc_entry+0x70/0x8c) from [<c0031498>] (ram_console_late_init+0x24/0x74)
  3467. <4>[    4.789947] [<c0031498>] (ram_console_late_init+0x24/0x74) from [<c010040c>] (do_one_initcall+0x90/0x160)
  3468. <4>[    4.799499] [<c010040c>] (do_one_initcall+0x90/0x160) from [<c00089a0>] (kernel_init+0x98/0x140)
  3469. <4>[    4.808197] [<c00089a0>] (kernel_init+0x98/0x140) from [<c0105e80>] (kernel_thread_exit+0x0/0x8)
  3470. <4>[    4.817016] ---[ end trace 76a20dd62cf172d8 ]---
  3471. <6>[    4.822570] Freeing init memory: 276K
  3472. <7>[    4.830657] SELinux: 512 avtab hash slots, 1958 rules.
  3473. <7>[    4.835662] SELinux: 512 avtab hash slots, 1958 rules.
  3474. <7>[    4.840179] SELinux:  1 users, 2 roles, 345 types, 13 bools, 1 sens, 1024 cats
  3475. <7>[    4.847167] SELinux:  84 classes, 1958 rules
  3476. <7>[    4.852416] SELinux:  Completing initialization.
  3477. <7>[    4.856079] SELinux:  Setting up existing superblocks.
  3478. <7>[    4.861297] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  3479. <7>[    4.868316] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
  3480. <7>[    4.876586] SELinux: initialized (dev bdev, type bdev), not configured for labeling
  3481. <7>[    4.883361] SELinux: initialized (dev proc, type proc), uses genfs_contexts
  3482. <7>[    4.890258] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  3483. <7>[    4.897521] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
  3484. <7>[    4.913452] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
  3485. <7>[    4.919433] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
  3486. <7>[    4.926330] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
  3487. <7>[    4.935363] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
  3488. <7>[    4.942687] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
  3489. <7>[    4.950683] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  3490. <7>[    4.957763] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
  3491. <5>[    5.237091] type=1403 audit(144771359.170:2): policy loaded auid=4294967295 ses=4294967295
  3492. <4>[    5.244781] SELinux: Loaded policy from (null)
  3493. <6>[    5.254821] sec_bat_get_lpcharging_state: LP charging:0
  3494. <3>[    5.259429] init: /init.rc: 64: invalid command 'load_all_props'
  3495. <3>[    5.265106] init: /init.rc: 88: invalid command 'powerctl'
  3496. <3>[    5.271545] init: cannot find '/sbin/healthd', disabling 'healthd'
  3497. <3>[    5.273712] init: invalid uid 'fm_radio'
  3498. <6>[    5.356842] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x88 (0x80)
  3499. <3>[    5.533721] sec_switch_init_work value = 1
  3500. <3>[    5.537017] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
  3501. <4>[    5.559692] fsa9480_manual_switching(0)
  3502. <4>[    5.711151] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5
  3503. <4>[    5.717254] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6
  3504. <4>[    5.723693] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7
  3505. <6>[    5.759399] a2220_bootup_init: firmware loaded successfully
  3506. <7>[    5.930358] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
  3507. <3>[    5.939208] android_usb: already disabled
  3508. <3>[    5.942993] init: Unable to open persistent property directory /data/property errno: 2
  3509. <3>[    5.952270] init: cannot setexeccon('u:r:recovery:s0'): Invalid argument
  3510. <5>[    5.958679] type=1400 audit(1447721359.890:3): avc:  denied  { relabelfrom } for  pid=116 comm="ueventd" name="boostfreq" dev=sysfs ino=23627 scontext=u:r:ueventd:s0 tcontext=u:object_r:sysfs:s0 tclass=file
  3511. <4>[    5.969512] set_freq_limit: 0x8 0, min 384000, max 1242000
  3512. <3>[    5.987152] android_usb: already disabled
  3513. <4>[    5.990753] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8
  3514. <4>[    5.996917] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 13
  3515. <7>[    6.004516] usb: enable_store f:mtp
  3516. <7>[    6.007141] usb: enable_store f:adb
  3517. <5>[    6.017456] type=1400 audit(1447721359.960:4): avc:  denied  { setattr } for  pid=116 comm="ueventd" name="boostfreq" dev=sysfs ino=23627 scontext=u:r:ueventd:s0 tcontextu:object_r:sysfs_writable:s0 tclass=file
  3518. <4>[    6.040466] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9
  3519. <6>[    6.040649] adb_open
  3520. <6>[    6.040679] mtp_bind_config
  3521. <6>[    6.040740] adb_bind_config
  3522. <4>[    6.041107] audience_a2220 :execute_cmdmsg : ...go to suspend first
  3523. <4>[    6.041137] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 10
  3524. <5>[    6.041625] type=1400 audit(1447721359.980:5): avc:  denied  { getattr } for  pid=116 comm="ueventd" path="/sys/devices/system/cpu/cpufreq/ondemand/boostfreq" dev=sysfs ino=23627 scontext=u:r:ueventd:s0 tcontext=u:object_r:sysfs_writable:s0 tclass=file
  3525. <4>[    6.105529] ld9040 get_gamma_value_from_bl >>> bl_value:250, gamma_value: 22.
  3526. <4>[    6.105590]  ld9040 brightness!!! bl_level=255, tune_level=22 curr=18
  3527. <4>[    6.107208] ld9040 ea8868_gamma_ctl 22 22
  3528. <4>[    6.169494] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11
  3529. <6>[    6.175415] a2220_bootup_init: initialized!
  3530. <4>[    6.189117] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish
  3531. <6>[    6.239318] zcache: created ephemeral tmem pool, id=0, client=65535
  3532. <6>[    6.245117] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  3533. <7>[    6.252441] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
  3534. <6>[    6.259277] zcache: destroyed pool id=0, cli_id=65535
  3535. <6>[    6.323028] zcache: created ephemeral tmem pool, id=0, client=65535
  3536. <6>[    6.328460] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts:
  3537. <7>[    6.336120] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
  3538. <6>[    6.385589] zcache: created ephemeral tmem pool, id=1, client=65535
  3539. <6>[    6.391082] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts:
  3540. <7>[    6.398651] SELinux: initialized (dev mmcblk0p28, type ext4), uses xattr
  3541. <6>[    6.455047] zcache: created ephemeral tmem pool, id=2, client=65535
  3542. <6>[    6.460571] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts:
  3543. <7>[    6.468109] SELinux: initialized (dev mmcblk0p21, type ext4), uses xattr
  3544. <6>[    6.475677] zcache: destroyed pool id=2, cli_id=65535
  3545. <6>[    6.538024] zcache: created ephemeral tmem pool, id=2, client=65535
  3546. <6>[    6.543487] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  3547. <7>[    6.551116] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
  3548. <6>[    6.557983] zcache: destroyed pool id=2, cli_id=65535
  3549. <6>[    6.633972] zcache: created ephemeral tmem pool, id=2, client=65535
  3550. <6>[    6.640869] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
  3551. <7>[    6.647644] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
  3552. <6>[    6.654724] zcache: destroyed pool id=2, cli_id=65535
  3553. <7>[    6.718872] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
  3554. <6>[    7.795349] zcache: created ephemeral tmem pool, id=2, client=65535
  3555. <6>[    7.800842] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
  3556. <7>[    7.808319] SELinux: initialized (dev mmcblk0p27, type ext4), uses xattr
  3557. <6>[    7.815338] zcache: destroyed pool id=2, cli_id=65535
  3558. <6>[    9.371704] msmsdcc_runtime_suspend: Enter WIFI suspend
  3559. <6>[    9.541748] fsa9480 5-0025: fsa9480_init_detect
  3560. <6>[    9.547393] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
  3561. <6>[   13.371734] smb328a_int_work_func
  3562. <6>[   13.374969] smb328a_int_work_func : reg (0x37) = 0x0
  3563. <6>[   13.380004] smb328a_int_work_func : reg (0x36) = 0x3
  3564. <6>[   13.385070] sec_bat_set_property: 1
  3565. <6>[   13.387725] sec_bat_set_property: charger inserted!!
  3566. <6>[   13.421295] msm_otg_resume: usb exited from low power mode
  3567. <4>[   13.426239] msm_otg_irq: IRQ state: b_idle     otgsc = 92c2f20
  3568. <6>[   13.431732] [OTG] msm_otg_start_peripheral, on = 1
  3569. <6>[   13.565277] fsa9480 5-0025: fsa9480_Check_AVDock intr: 0x1
  3570. <6>[   13.571136] fsa9480 5-0025: dev1: 0x4, dev2: 0x0
  3571. <6>[   13.575103] fsa9480 5-0025: usb connect
  3572. <3>[   13.578765] fsa9480_usb_cb attached 1
  3573. <3>[   13.582458] [TSP] mxt224_ta_probe
  3574. <3>[   13.594726] [TSP]TA_probe MXT224E T48 Byte2 is 114
  3575. <6>[   13.598693] sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
  3576. <3>[   13.636566] [TSP] Calibration!!!!!!
  3577. <6>[   13.659667] usb_reset: usb: notify offline
  3578. <7>[   13.663238] usb: composite_disconnect
  3579. <3>[   13.666992] [TSP] Calibration End!!!!!!
  3580. <3>[   13.670501] [TSP] Clearing unused slots
  3581. <7>[   13.674713] usb: android_disconnect schedule_work
  3582. <7>[   13.679626] usb: android_work config=  (null),connected=0,sw_connected=0
  3583. <6>[   13.685821] android_work: did not send uevent (0 0   (null))
  3584. <4>[   13.803985] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9200f20
  3585. <7>[   13.959106] usb: android_work config=  (null),connected=1,sw_connected=0
  3586. <4>[   13.965240] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9202f20
  3587. <6>[   13.971618] android_work: sent uevent USB_STATE=CONNECTED
  3588. <6>[   14.117980] msm_hsusb msm_hsusb: PCI intr missedset speed explictly
  3589. <7>[   14.167449] usb: set_config_number single config
  3590. <7>[   14.171264] usb: set_interface_count next_interface_id=2
  3591. <7>[   14.183166] usb: set_config_number single config
  3592. <7>[   14.187164] usb: set_interface_count next_interface_id=2
  3593. <7>[   14.192657] usb: set_config_number single config
  3594. <7>[   14.197052] usb: set_interface_count next_interface_id=2
  3595. <6>[   14.202575] android_usb gadget: high speed config #1: android
  3596. <7>[   14.208435] usb: android_work config=c0bc6ac4,connected=1,sw_connected=1
  3597. <6>[   14.215301] smb328a 15-0034: smb328a_set_charging_current :
  3598. <6>[   14.221954] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0x0
  3599. <6>[   14.229705] android_work: sent uevent USB_STATE=CONFIGURED
  3600. <6>[   14.235015] smb328a_set_command_reg : => reg (0x31) = 0xa9
  3601. <6>[   14.241668] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x31
  3602. <6>[   14.249664] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x0) = 0x17
  3603. <6>[   14.257354] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x5
  3604. <6>[   14.265167] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0x10
  3605. <6>[   14.272918] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
  3606. <6>[   14.280822] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
  3607. <6>[   14.288055] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
  3608. <6>[   14.295379] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x44
  3609. <6>[   14.303009] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
  3610. <6>[   14.310211] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x8b
  3611. <6>[   14.317901] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
  3612. <6>[   14.325073] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x5c
  3613. <6>[   14.333129] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0x4d
  3614. <6>[   14.340301] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0x36
  3615. <6>[   14.347900] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x7) = 0xf6
  3616. <6>[   14.355072] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
  3617. <6>[   14.362396] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
  3618. <6>[   14.369903] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
  3619. <6>[   14.376495] smb328a 15-0034: smb328a_get_input_current_limit :
  3620. <6>[   14.384124] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0x10
  3621. <6>[   14.390502] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 450, data = 0
  3622. <6>[   14.398834] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200
  3623. <6>[   14.407592] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0x17
  3624. <6>[   14.413696] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0x17
  3625. <6>[   14.419952] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6
  3626. <6>[   14.426422] smb328a 15-0034: smb328a_set_top_off : => reg (0x7) = 0xf6
  3627. <6>[   14.433105] smb328a 15-0034: smb328a_enable_charging :
  3628. <6>[   14.437835] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xa9
  3629. <6>[   14.444763] smb328a_enable_charging : => reg (0x31) = 0xa9
  3630. <6>[   14.449584] smb328a 15-0034: smb328a_watchdog_control : (1)
  3631. <6>[   14.455871] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
  3632. <6>[   14.462554] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f
  3633. <7>[   14.495086] usb: enable_store f:adb
  3634. <7>[   14.497680] usb: enable_store f:mass_storage
  3635. <6>[   14.501983] adb_release
  3636. <6>[   14.504486] adb_bind_config
  3637. <6>[   14.507232] adb_open
  3638. <6>[   14.509307] adb_bind_config
  3639. <6>[   14.513702] usb_interrupt: usb: notify offline
  3640. <7>[   14.517211] usb: composite_disconnect
  3641. <7>[   14.520935] usb: android_disconnect mute_switch
  3642. <4>[   14.525604] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9200f20
  3643. <6>[   14.659851] smb328a_int_work_func
  3644. <6>[   14.662658] smb328a_int_work_func : reg (0x37) = 0x0
  3645. <6>[   14.667572] smb328a_int_work_func : reg (0x36) = 0x5
  3646. <6>[   14.672607] sec_bat_set_property: 1
  3647. <6>[   14.675598] sec_bat_set_property: charger inserted!!
  3648. <4>[   14.792907] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9202f20
  3649. <7>[   14.948120] usb: android_work config=  (null),connected=1,sw_connected=0
  3650. <4>[   14.954010] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9200f20
  3651. <6>[   14.960113] android_work: sent uevent USB_STATE=CONNECTED
  3652. <7>[   15.071929] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
  3653. <7>[   15.151397] usb: set_config_number single config
  3654. <7>[   15.155151] usb: set_interface_count next_interface_id=2
  3655. <7>[   15.165069] usb: set_config_number single config
  3656. <7>[   15.168762] usb: set_interface_count next_interface_id=2
  3657. <7>[   15.174438] usb: set_config_number single config
  3658. <7>[   15.178649] usb: set_interface_count next_interface_id=2
  3659. <6>[   15.184356] android_usb gadget: high speed config #1: android
  3660. <7>[   15.189819] usb: android_work config=c0bc6ac4,connected=1,sw_connected=1
  3661. <6>[   15.196655] android_work: sent uevent USB_STATE=CONFIGURED
  3662. <4>[   15.637939] ld9040 get_gamma_value_from_bl >>> bl_value:117, gamma_value: 8.
  3663. <4>[   15.637969]  ld9040 brightness!!! bl_level=117, tune_level=8 curr=22
  3664. <4>[   15.652130] ld9040 ea8868_gamma_ctl 8 8
  3665. <6>[   16.459655] mtp_open
  3666. <7>[   16.984130] usb: set_config_number single config
  3667. <7>[   16.988128] usb: set_interface_count next_interface_id=2
  3668. <7>[   16.994873] usb: set_config_number single config
  3669. <7>[   16.998687] usb: set_interface_count next_interface_id=2
  3670. <7>[   17.486083] [TSP] ID-0,UD:1
  3671. <3>[   17.510223] [TSP] t: 5, a: 0
  3672. <7>[   17.590576] [TSP] ID-0,UD:0
  3673. <7>[   19.926330] [TSP] ID-0,UD:1
  3674. <3>[   19.950439] [TSP] t: 4, a: 0
  3675. <3>[   19.952941] [TSP] calibration was good
  3676. <3>[   19.958038] [TSP] Clearing unused slots
  3677. <7>[   20.045196] [TSP] ID-0,UD:0
  3678. <7>[   36.908416] [TSP] ID-0,UD:1
  3679. <7>[   36.997070] [TSP] ID-0,UD:0
  3680. <4>[   38.170318] [TKEY] DATA0 4
  3681. <7>[   38.172302] touchkey press keycode:217
  3682. <7>[   38.180633] [TSP] ID-0,UD:1
  3683. <4>[   38.255828] [TKEY] DATA0 12
  3684. <7>[   38.257812] touchkey release keycode:217
  3685. <7>[   38.269073] [TSP] ID-0,UD:0
  3686. <7>[   38.794158] [TSP] ID-0,UD:1
  3687. <7>[   38.882781] [TSP] ID-0,UD:0
  3688. <7>[   40.149291] [TSP] ID-0,UD:1
  3689. <7>[   40.238067] [TSP] ID-0,UD:0
  3690. <6>[   40.242492] adb_release
  3691. <6>[   40.252105] mtp_release
  3692. <3>[   40.255004] android_usb: already disabled
  3693. <7>[   40.258422] usb: enable_store f:adb
  3694. <6>[   40.278900] adb_open
  3695. <6>[   40.278930] adb_bind_config
  3696. <6>[   40.280548] usb_interrupt: usb: notify offline
  3697. <7>[   40.280578] usb: composite_disconnect
  3698. <7>[   40.280609] usb: android_disconnect mute_switch
  3699. <4>[   40.297729] msm_otg_irq: 1 callbacks suppressed
  3700. <4>[   40.297760] msm_otg_irq: IRQ state: b_peripheral   otesc = 9200f20
  3701. <4>[   40.489501] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9200f20
  3702. <7>[   40.644531] usb: android_work config=  (null),connected=1,sw_connected=0
  3703. <4>[   40.650360] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9202f20
  3704. <6>[   40.656463] android_work: sent uevent USB_STATE=CONNECTED
  3705. <6>[   40.803588] msm_hsusb msm_hsusb: PCI intr missedset speed explictly
  3706. <7>[   40.853088] usb: set_config_number single config
  3707. <7>[   40.856842] usb: set_interface_count next_interface_id=1
  3708. <7>[   42.421112] usb: set_config_number single config
  3709. <7>[   42.425109] usb: set_interface_count next_interface_id=1
  3710. <7>[   42.432220] usb: set_config_number single config
  3711. <7>[   42.436187] usb: set_interface_count next_interface_id=1
  3712. <7>[   43.010620] [TSP] ID-0,UD:1
  3713. <7>[   43.099121] [TSP] ID-0,UD:0
  3714. <6>[   43.139984] zcache: created ephemeral tmem pool, id=2, client=65535
  3715. <6>[   43.145629] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
  3716. <7>[   43.153137] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
  3717. <7>[   44.308990] [TSP] ID-0,UD:1
  3718. <7>[   44.385040] [TSP] ID-0,UD:2
  3719. <7>[   44.400207] [TSP] ID-0,UD:2
  3720. <7>[   44.415557] [TSP] ID-0,UD:2
  3721. <7>[   44.430786] [TSP] ID-0,UD:2
  3722. <7>[   44.445953] [TSP] ID-0,UD:2
  3723. <7>[   44.461242] [TSP] ID-0,UD:2
  3724. <7>[   44.476379] [TSP] ID-0,UD:2
  3725. <7>[   44.492523] [TSP] ID-0,UD:2
  3726. <7>[   44.508117] [TSP] ID-0,UD:2
  3727. <7>[   44.523010] [TSP] ID-0,UD:2
  3728. <7>[   44.538208] [TSP] ID-0,UD:2
  3729. <7>[   44.553466] [TSP] ID-0,UD:2
  3730. <7>[   44.568725] [TSP] ID-0,UD:2
  3731. <7>[   44.583953] [TSP] ID-0,UD:2
  3732. <7>[   44.599212] [TSP] ID-0,UD:2
  3733. <7>[   44.614410] [TSP] ID-0,UD:2
  3734. <7>[   44.644836] [TSP] ID-0,UD:2
  3735. <7>[   44.675354] [TSP] ID-0,UD:2
  3736. <7>[   44.706665] [TSP] ID-0,UD:2
  3737. <7>[   44.752319] [TSP] ID-0,UD:2
  3738. <7>[   44.767547] [TSP] ID-0,UD:2
  3739. <7>[   44.828521] [TSP] ID-0,UD:2
  3740. <7>[   44.901947] [TSP] ID-0,UD:0
  3741. <7>[   45.111358] [TSP] ID-0,UD:1
  3742. <7>[   45.199920] [TSP] ID-0,UD:0
  3743. <6>[   45.230346] zcache: created ephemeral tmem pool, id=3, client=65535
  3744. <6>[   45.235809] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
  3745. <7>[   45.243408] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
  3746. <4>[   70.604309] [TKEY] DATA0 3
  3747. <7>[   70.606262] touchkey press keycode:158
  3748. <4>[   70.707214] [TKEY] DATA0 11
  3749. <7>[   70.709411] touchkey release keycode:158
  3750. <7>[   71.827758] [TSP] ID-0,UD:1
  3751. <7>[   71.947814] [TSP] ID-0,UD:0
  3752. <7>[   73.022583] [TSP] ID-0,UD:1
  3753. <7>[   73.127685] [TSP] ID-0,UD:0
  3754. <7>[   75.342163] [TSP] ID-0,UD:1
  3755. <7>[   75.434661] [TSP] ID-0,UD:2
  3756. <7>[   75.450012] [TSP] ID-0,UD:2
  3757. <7>[   75.465270] [TSP] ID-0,UD:2
  3758. <7>[   75.480499] [TSP] ID-0,UD:2
  3759. <7>[   75.495758] [TSP] ID-0,UD:2
  3760. <7>[   75.511108] [TSP] ID-0,UD:2
  3761. <7>[   75.526306] [TSP] ID-0,UD:2
  3762. <7>[   75.541625] [TSP] ID-0,UD:2
  3763. <7>[   75.556854] [TSP] ID-0,UD:2
  3764. <7>[   75.572204] [TSP] ID-0,UD:2
  3765. <7>[   75.587432] [TSP] ID-0,UD:2
  3766. <7>[   75.603637] [TSP] ID-0,UD:2
  3767. <7>[   75.618865] [TSP] ID-0,UD:2
  3768. <7>[   75.661834] [TSP] ID-0,UD:0
  3769. <7>[   76.201660] [TSP] ID-0,UD:1
  3770. <7>[   76.323944] [TSP] ID-0,UD:2
  3771. <7>[   76.339172] [TSP] ID-0,UD:2
  3772. <7>[   76.354553] [TSP] ID-0,UD:2
  3773. <7>[   76.369812] [TSP] ID-0,UD:2
  3774. <7>[   76.386108] [TSP] ID-0,UD:2
  3775. <7>[   76.401306] [TSP] ID-0,UD:2
  3776. <7>[   76.416625] [TSP] ID-0,UD:2
  3777. <7>[   76.431884] [TSP] ID-0,UD:2
  3778. <7>[   76.447113] [TSP] ID-0,UD:2
  3779. <7>[   76.462463] [TSP] ID-0,UD:2
  3780. <7>[   76.477661] [TSP] ID-0,UD:2
  3781. <7>[   76.492980] [TSP] ID-0,UD:2
  3782. <7>[   76.508178] [TSP] ID-0,UD:2
  3783. <7>[   76.523559] [TSP] ID-0,UD:2
  3784. <7>[   76.538818] [TSP] ID-0,UD:2
  3785. <7>[   76.554138] [TSP] ID-0,UD:2
  3786. <7>[   76.569366] [TSP] ID-0,UD:2
  3787. <7>[   76.585449] [TSP] ID-0,UD:2
  3788. <7>[   76.628448] [TSP] ID-0,UD:0
  3789. <7>[   77.250152] [TSP] ID-0,UD:1
  3790. <7>[   77.311218] [TSP] ID-0,UD:2
  3791. <7>[   77.326568] [TSP] ID-0,UD:2
  3792. <7>[   77.341827] [TSP] ID-0,UD:2
  3793. <7>[   77.357177] [TSP] ID-0,UD:2
  3794. <7>[   77.372467] [TSP] ID-0,UD:2
  3795. <7>[   77.388549] [TSP] ID-0,UD:2
  3796. <7>[   77.403778] [TSP] ID-0,UD:2
  3797. <7>[   77.418945] [TSP] ID-0,UD:2
  3798. <7>[   77.434326] [TSP] ID-0,UD:2
  3799. <7>[   77.449554] [TSP] ID-0,UD:2
  3800. <7>[   77.464935] [TSP] ID-0,UD:2
  3801. <7>[   77.480072] [TSP] ID-0,UD:2
  3802. <7>[   77.495452] [TSP] ID-0,UD:2
  3803. <7>[   77.510650] [TSP] ID-0,UD:2
  3804. <7>[   77.526000] [TSP] ID-0,UD:2
  3805. <7>[   77.541198] [TSP] ID-0,UD:2
  3806. <7>[   77.556518] [TSP] ID-0,UD:2
  3807. <7>[   77.572784] [TSP] ID-0,UD:2
  3808. <7>[   77.588012] [TSP] ID-0,UD:2
  3809. <7>[   77.603302] [TSP] ID-0,UD:2
  3810. <7>[   77.618438] [TSP] ID-0,UD:2
  3811. <7>[   77.649017] [TSP] ID-0,UD:2
  3812. <7>[   77.679595] [TSP] ID-0,UD:2
  3813. <7>[   77.694915] [TSP] ID-0,UD:2
  3814. <7>[   77.737884] [TSP] ID-0,UD:0
  3815. <7>[   78.537841] [TSP] ID-0,UD:1
  3816. <7>[   78.688293] [TSP] ID-0,UD:0
  3817. <7>[   80.627655] [TSP] ID-0,UD:1
  3818. <7>[   80.719116] [TSP] ID-0,UD:2
  3819. <7>[   80.734954] [TSP] ID-0,UD:2
  3820. <7>[   80.750213] [TSP] ID-0,UD:2
  3821. <7>[   80.765441] [TSP] ID-0,UD:2
  3822. <7>[   80.780700] [TSP] ID-0,UD:2
  3823. <7>[   80.795806] [TSP] ID-0,UD:2
  3824. <7>[   80.811126] [TSP] ID-0,UD:2
  3825. <7>[   80.827636] [TSP] ID-0,UD:2
  3826. <7>[   80.841613] [TSP] ID-0,UD:2
  3827. <7>[   80.856842] [TSP] ID-0,UD:2
  3828. <7>[   80.872039] [TSP] ID-0,UD:2
  3829. <7>[   80.887298] [TSP] ID-0,UD:2
  3830. <7>[   80.902496] [TSP] ID-0,UD:2
  3831. <7>[   80.917755] [TSP] ID-0,UD:2
  3832. <7>[   80.933929] [TSP] ID-0,UD:2
  3833. <7>[   80.949127] [TSP] ID-0,UD:2
  3834. <7>[   80.964263] [TSP] ID-0,UD:2
  3835. <7>[   80.979675] [TSP] ID-0,UD:2
  3836. <7>[   80.994628] [TSP] ID-0,UD:2
  3837. <7>[   81.009948] [TSP] ID-0,UD:2
  3838. <7>[   81.025177] [TSP] ID-0,UD:2
  3839. <7>[   81.040405] [TSP] ID-0,UD:2
  3840. <7>[   81.055664] [TSP] ID-0,UD:2
  3841. <7>[   81.070892] [TSP] ID-0,UD:2
  3842. <7>[   81.086120] [TSP] ID-0,UD:2
  3843. <7>[   81.101318] [TSP] ID-0,UD:2
  3844. <7>[   81.116577] [TSP] ID-0,UD:2
  3845. <7>[   81.132690] [TSP] ID-0,UD:2
  3846. <7>[   81.147979] [TSP] ID-0,UD:2
  3847. <7>[   81.163146] [TSP] ID-0,UD:2
  3848. <7>[   81.178466] [TSP] ID-0,UD:2
  3849. <7>[   81.193572] [TSP] ID-0,UD:2
  3850. <7>[   81.208831] [TSP] ID-0,UD:2
  3851. <7>[   81.224060] [TSP] ID-0,UD:2
  3852. <7>[   81.239318] [TSP] ID-0,UD:2
  3853. <7>[   81.254547] [TSP] ID-0,UD:2
  3854. <7>[   81.269744] [TSP] ID-0,UD:2
  3855. <7>[   81.285125] [TSP] ID-0,UD:2
  3856. <7>[   81.300231] [TSP] ID-0,UD:2
  3857. <7>[   81.315582] [TSP] ID-0,UD:2
  3858. <7>[   81.331512] [TSP] ID-0,UD:2
  3859. <7>[   81.346832] [TSP] ID-0,UD:2
  3860. <7>[   81.362030] [TSP] ID-0,UD:2
  3861. <7>[   81.377349] [TSP] ID-0,UD:2
  3862. <7>[   81.392639] [TSP] ID-0,UD:2
  3863. <7>[   81.407867] [TSP] ID-0,UD:2
  3864. <7>[   81.423126] [TSP] ID-0,UD:2
  3865. <7>[   81.453674] [TSP] ID-0,UD:2
  3866. <7>[   81.468841] [TSP] ID-0,UD:2
  3867. <7>[   81.484130] [TSP] ID-0,UD:2
  3868. <7>[   81.514709] [TSP] ID-0,UD:2
  3869. <7>[   81.530670] [TSP] ID-0,UD:2
  3870. <7>[   81.545959] [TSP] ID-0,UD:2
  3871. <7>[   81.561248] [TSP] ID-0,UD:2
  3872. <7>[   81.576507] [TSP] ID-0,UD:2
  3873. <7>[   81.591644] [TSP] ID-0,UD:2
  3874. <7>[   81.606872] [TSP] ID-0,UD:2
  3875. <7>[   81.622100] [TSP] ID-0,UD:2
  3876. <7>[   81.637237] [TSP] ID-0,UD:2
  3877. <7>[   81.652618] [TSP] ID-0,UD:2
  3878. <7>[   81.667724] [TSP] ID-0,UD:2
  3879. <7>[   81.683044] [TSP] ID-0,UD:2
  3880. <7>[   81.698211] [TSP] ID-0,UD:2
  3881. <7>[   81.713500] [TSP] ID-0,UD:2
  3882. <7>[   81.729675] [TSP] ID-0,UD:2
  3883. <7>[   81.744964] [TSP] ID-0,UD:2
  3884. <7>[   81.775451] [TSP] ID-0,UD:2
  3885. <7>[   81.790649] [TSP] ID-0,UD:2
  3886. <7>[   81.821197] [TSP] ID-0,UD:2
  3887. <7>[   81.836273] [TSP] ID-0,UD:2
  3888. <7>[   81.851562] [TSP] ID-0,UD:2
  3889. <7>[   81.866729] [TSP] ID-0,UD:2
  3890. <7>[   81.882049] [TSP] ID-0,UD:2
  3891. <7>[   81.897247] [TSP] ID-0,UD:2
  3892. <7>[   81.928710] [TSP] ID-0,UD:2
  3893. <7>[   81.943939] [TSP] ID-0,UD:2
  3894. <7>[   81.959259] [TSP] ID-0,UD:2
  3895. <7>[   81.974487] [TSP] ID-0,UD:2
  3896. <7>[   81.989807] [TSP] ID-0,UD:2
  3897. <7>[   82.004974] [TSP] ID-0,UD:2
  3898. <7>[   82.020294] [TSP] ID-0,UD:2
  3899. <7>[   82.035461] [TSP] ID-0,UD:2
  3900. <7>[   82.050781] [TSP] ID-0,UD:2
  3901. <7>[   82.065917] [TSP] ID-0,UD:2
  3902. <7>[   82.081207] [TSP] ID-0,UD:2
  3903. <7>[   82.096466] [TSP] ID-0,UD:2
  3904. <7>[   82.111663] [TSP] ID-0,UD:2
  3905. <7>[   82.127929] [TSP] ID-0,UD:2
  3906. <7>[   82.143157] [TSP] ID-0,UD:2
  3907. <7>[   82.158386] [TSP] ID-0,UD:2
  3908. <7>[   82.173553] [TSP] ID-0,UD:2
  3909. <7>[   82.188842] [TSP] ID-0,UD:2
  3910. <7>[   82.219299] [TSP] ID-0,UD:2
  3911. <7>[   82.234436] [TSP] ID-0,UD:2
  3912. <7>[   82.265014] [TSP] ID-0,UD:2
  3913. <7>[   82.280242] [TSP] ID-0,UD:2
  3914. <7>[   82.295471] [TSP] ID-0,UD:2
  3915. <7>[   82.342163] [TSP] ID-0,UD:2
  3916. <7>[   82.387908] [TSP] ID-0,UD:2
  3917. <7>[   82.418426] [TSP] ID-0,UD:2
  3918. <7>[   82.433654] [TSP] ID-0,UD:2
  3919. <7>[   82.509765] [TSP] ID-0,UD:2
  3920. <7>[   82.647979] [TSP] ID-0,UD:2
  3921. <7>[   82.678436] [TSP] ID-0,UD:2
  3922. <7>[   82.771026] [TSP] ID-0,UD:2
  3923. <7>[   82.786254] [TSP] ID-0,UD:2
  3924. <7>[   82.801483] [TSP] ID-0,UD:2
  3925. <7>[   82.816802] [TSP] ID-0,UD:2
  3926. <7>[   82.832031] [TSP] ID-0,UD:2
  3927. <7>[   82.847137] [TSP] ID-0,UD:2
  3928. <7>[   82.862518] [TSP] ID-0,UD:2
  3929. <7>[   82.877685] [TSP] ID-0,UD:2
  3930. <7>[   82.893035] [TSP] ID-0,UD:2
  3931. <7>[   82.908782] [TSP] ID-0,UD:2
  3932. <7>[   82.924133] [TSP] ID-0,UD:2
  3933. <7>[   82.967071] [TSP] ID-0,UD:0
  3934. <7>[   84.453826] [TSP] ID-0,UD:1
  3935. <7>[   84.546661] [TSP] ID-0,UD:2
  3936. <7>[   84.561950] [TSP] ID-0,UD:2
  3937. <7>[   84.577270] [TSP] ID-0,UD:2
  3938. <7>[   84.620208] [TSP] ID-0,UD:0
  3939. <7>[   85.338714] [TSP] ID-0,UD:1
  3940. <7>[   85.458038] [TSP] ID-0,UD:0
  3941. <7>[   86.037658] [TSP] ID-0,UD:1
  3942. <7>[   86.157470] [TSP] ID-0,UD:0
  3943. <7>[   86.777954] [TSP] ID-0,UD:1
  3944. <7>[   86.885375] [TSP] ID-0,UD:2
  3945. <7>[   86.900604] [TSP] ID-0,UD:2
  3946. <7>[   86.915893] [TSP] ID-0,UD:2
  3947. <7>[   86.931182] [TSP] ID-0,UD:2
  3948. <7>[   86.946319] [TSP] ID-0,UD:2
  3949. <7>[   86.961578] [TSP] ID-0,UD:2
  3950. <7>[   86.976806] [TSP] ID-0,UD:2
  3951. <7>[   86.992126] [TSP] ID-0,UD:2
  3952. <7>[   87.007293] [TSP] ID-0,UD:2
  3953. <7>[   87.022644] [TSP] ID-0,UD:2
  3954. <7>[   87.065521] [TSP] ID-0,UD:0
  3955. <7>[   87.837097] [TSP] ID-0,UD:1
  3956. <7>[   87.972259] [TSP] ID-0,UD:0
  3957. <7>[   88.853302] [TSP] ID-0,UD:1
  3958. <7>[   88.914398] [TSP] ID-0,UD:2
  3959. <7>[   88.929748] [TSP] ID-0,UD:2
  3960. <7>[   88.945037] [TSP] ID-0,UD:2
  3961. <7>[   88.987915] [TSP] ID-0,UD:0
  3962. <7>[   89.622283] [TSP] ID-0,UD:1
  3963. <7>[   89.653472] [TSP] ID-0,UD:2
  3964. <7>[   89.696289] [TSP] ID-0,UD:0
  3965. <7>[   90.495117] [TSP] ID-0,UD:1
  3966. <7>[   90.525634] [TSP] ID-0,UD:2
  3967. <7>[   90.540802] [TSP] ID-0,UD:2
  3968. <7>[   90.556060] [TSP] ID-0,UD:2
  3969. <7>[   90.598876] [TSP] ID-0,UD:0
  3970. <7>[   91.644348] [TSP] ID-0,UD:1
  3971. <7>[   91.674926] [TSP] ID-0,UD:2
  3972. <7>[   91.690155] [TSP] ID-0,UD:2
  3973. <7>[   91.705444] [TSP] ID-0,UD:2
  3974. <7>[   91.748413] [TSP] ID-0,UD:0
  3975. <7>[   92.602600] [TSP] ID-0,UD:1
  3976. <7>[   92.633087] [TSP] ID-0,UD:2
  3977. <7>[   92.648406] [TSP] ID-0,UD:2
  3978. <7>[   92.663543] [TSP] ID-0,UD:2
  3979. <7>[   92.706573] [TSP] ID-0,UD:0
  3980. <7>[   93.341827] [TSP] ID-0,UD:1
  3981. <7>[   93.710449] [TSP] ID-0,UD:2
  3982. <7>[   93.756221] [TSP] ID-0,UD:2
  3983. <7>[   93.787841] [TSP] ID-0,UD:2
  3984. <7>[   93.879425] [TSP] ID-0,UD:2
  3985. <7>[   93.955780] [TSP] ID-0,UD:2
  3986. <7>[   93.971099] [TSP] ID-0,UD:2
  3987. <7>[   93.987182] [TSP] ID-0,UD:2
  3988. <7>[   94.002410] [TSP] ID-0,UD:2
  3989. <7>[   94.045471] [TSP] ID-0,UD:0
  3990. <7>[   94.584503] [TSP] ID-0,UD:1
  3991. <7>[   94.783721] [TSP] ID-0,UD:2
  3992. <7>[   94.798980] [TSP] ID-0,UD:2
  3993. <7>[   94.814361] [TSP] ID-0,UD:2
  3994. <7>[   94.829528] [TSP] ID-0,UD:2
  3995. <7>[   94.844848] [TSP] ID-0,UD:2
  3996. <7>[   94.860015] [TSP] ID-0,UD:2
  3997. <7>[   94.875335] [TSP] ID-0,UD:2
  3998. <7>[   94.905792] [TSP] ID-0,UD:2
  3999. <7>[   94.921020] [TSP] ID-0,UD:2
  4000. <7>[   94.936218] [TSP] ID-0,UD:2
  4001. <7>[   94.967651] [TSP] ID-0,UD:2
  4002. <7>[   95.013427] [TSP] ID-0,UD:2
  4003. <7>[   95.059204] [TSP] ID-0,UD:2
  4004. <7>[   95.074523] [TSP] ID-0,UD:2
  4005. <7>[   95.135467] [TSP] ID-0,UD:2
  4006. <7>[   95.243133] [TSP] ID-0,UD:2
  4007. <7>[   95.258331] [TSP] ID-0,UD:2
  4008. <7>[   95.273651] [TSP] ID-0,UD:2
  4009. <7>[   95.304107] [TSP] ID-0,UD:2
  4010. <7>[   95.334594] [TSP] ID-0,UD:2
  4011. <7>[   95.349914] [TSP] ID-0,UD:2
  4012. <7>[   95.365997] [TSP] ID-0,UD:2
  4013. <7>[   95.381347] [TSP] ID-0,UD:2
  4014. <7>[   95.396514] [TSP] ID-0,UD:2
  4015. <7>[   95.411834] [TSP] ID-0,UD:2
  4016. <7>[   95.427001] [TSP] ID-0,UD:2
  4017. <7>[   95.442352] [TSP] ID-0,UD:2
  4018. <7>[   95.457489] [TSP] ID-0,UD:2
  4019. <7>[   95.472686] [TSP] ID-0,UD:2
  4020. <7>[   95.488006] [TSP] ID-0,UD:2
  4021. <7>[   95.503173] [TSP] ID-0,UD:2
  4022. <7>[   95.518524] [TSP] ID-0,UD:2
  4023. <7>[   95.533721] [TSP] ID-0,UD:2
  4024. <7>[   95.549072] [TSP] ID-0,UD:2
  4025. <7>[   95.565002] [TSP] ID-0,UD:2
  4026. <7>[   95.580352] [TSP] ID-0,UD:2
  4027. <7>[   95.595550] [TSP] ID-0,UD:2
  4028. <7>[   95.610900] [TSP] ID-0,UD:2
  4029. <7>[   95.626098] [TSP] ID-0,UD:2
  4030. <7>[   95.641326] [TSP] ID-0,UD:2
  4031. <7>[   95.656677] [TSP] ID-0,UD:2
  4032. <7>[   95.671875] [TSP] ID-0,UD:2
  4033. <7>[   95.687255] [TSP] ID-0,UD:2
  4034. <7>[   95.702362] [TSP] ID-0,UD:2
  4035. <7>[   95.717712] [TSP] ID-0,UD:2
  4036. <7>[   95.732879] [TSP] ID-0,UD:2
  4037. <7>[   95.748229] [TSP] ID-0,UD:2
  4038. <7>[   95.764312] [TSP] ID-0,UD:2
  4039. <7>[   95.779632] [TSP] ID-0,UD:2
  4040. <7>[   95.794799] [TSP] ID-0,UD:2
  4041. <7>[   95.809997] [TSP] ID-0,UD:2
  4042. <7>[   95.825317] [TSP] ID-0,UD:2
  4043. <7>[   95.840484] [TSP] ID-0,UD:2
  4044. <7>[   95.855804] [TSP] ID-0,UD:2
  4045. <7>[   95.870971] [TSP] ID-0,UD:2
  4046. <7>[   95.886322] [TSP] ID-0,UD:2
  4047. <7>[   95.901489] [TSP] ID-0,UD:2
  4048. <7>[   95.916778] [TSP] ID-0,UD:2
  4049. <7>[   95.931945] [TSP] ID-0,UD:2
  4050. <7>[   95.947204] [TSP] ID-0,UD:2
  4051. <7>[   95.990173] [TSP] ID-0,UD:0
  4052. <7>[   97.117828] [TSP] ID-0,UD:1
  4053. <7>[   97.240509] [TSP] ID-0,UD:2
  4054. <7>[   97.255798] [TSP] ID-0,UD:2
  4055. <7>[   97.271118] [TSP] ID-0,UD:2
  4056. <7>[   97.286254] [TSP] ID-0,UD:2
  4057. <7>[   97.301635] [TSP] ID-0,UD:2
  4058. <7>[   97.318145] [TSP] ID-0,UD:2
  4059. <7>[   97.332122] [TSP] ID-0,UD:2
  4060. <7>[   97.348266] [TSP] ID-0,UD:2
  4061. <7>[   97.363555] [TSP] ID-0,UD:2
  4062. <7>[   97.378784] [TSP] ID-0,UD:2
  4063. <7>[   97.394012] [TSP] ID-0,UD:2
  4064. <7>[   97.409271] [TSP] ID-0,UD:2
  4065. <7>[   97.424530] [TSP] ID-0,UD:2
  4066. <7>[   97.439727] [TSP] ID-0,UD:2
  4067. <7>[   97.454895] [TSP] ID-0,UD:2
  4068. <7>[   97.485412] [TSP] ID-0,UD:2
  4069. <7>[   97.515960] [TSP] ID-0,UD:2
  4070. <7>[   97.531250] [TSP] ID-0,UD:2
  4071. <7>[   97.546936] [TSP] ID-0,UD:2
  4072. <7>[   97.589691] [TSP] ID-0,UD:0
  4073. <7>[   99.116790] [TSP] ID-0,UD:1
  4074. <7>[   99.251037] [TSP] ID-0,UD:0
  4075. <7>[  100.269805] [TSP] ID-0,UD:1
  4076. <7>[  100.389587] [TSP] ID-0,UD:0
  4077. <7>[  103.698059] [TSP] ID-0,UD:1
  4078. <7>[  103.832244] [TSP] ID-0,UD:0
  4079. <7>[  108.004364] [TSP] ID-0,UD:1
  4080. <7>[  108.078186] [TSP] ID-0,UD:0
  4081. <7>[  109.109893] [TSP] ID-0,UD:1
  4082. <7>[  109.228942] [TSP] ID-0,UD:0
  4083. <7>[  112.976257] [TSP] ID-0,UD:1
  4084. <7>[  113.095184] [TSP] ID-0,UD:0
  4085. <7>[  114.237182] [TSP] ID-0,UD:1
  4086. <7>[  114.313537] [TSP] ID-0,UD:2
  4087. <7>[  114.328735] [TSP] ID-0,UD:2
  4088. <7>[  114.344818] [TSP] ID-0,UD:2
  4089. <7>[  114.360198] [TSP] ID-0,UD:2
  4090. <7>[  114.375366] [TSP] ID-0,UD:2
  4091. <7>[  114.390655] [TSP] ID-0,UD:2
  4092. <7>[  114.405853] [TSP] ID-0,UD:2
  4093. <7>[  114.421234] [TSP] ID-0,UD:2
  4094. <7>[  114.436492] [TSP] ID-0,UD:2
  4095. <7>[  114.451812] [TSP] ID-0,UD:2
  4096. <7>[  114.467041] [TSP] ID-0,UD:2
  4097. <7>[  114.482330] [TSP] ID-0,UD:2
  4098. <7>[  114.497558] [TSP] ID-0,UD:2
  4099. <7>[  114.512817] [TSP] ID-0,UD:2
  4100. <7>[  114.528198] [TSP] ID-0,UD:2
  4101. <7>[  114.544189] [TSP] ID-0,UD:2
  4102. <7>[  114.559600] [TSP] ID-0,UD:2
  4103. <7>[  114.574768] [TSP] ID-0,UD:2
  4104. <7>[  114.590118] [TSP] ID-0,UD:2
  4105. <7>[  114.605285] [TSP] ID-0,UD:2
  4106. <7>[  114.620574] [TSP] ID-0,UD:2
  4107. <7>[  114.635772] [TSP] ID-0,UD:2
  4108. <7>[  114.651062] [TSP] ID-0,UD:2
  4109. <7>[  114.693969] [TSP] ID-0,UD:0
  4110. <7>[  139.344665] [TSP] ID-0,UD:1
  4111. <7>[  139.678131] [TSP] ID-0,UD:0
  4112. <4>[  144.015075] [TKEY] DATA0 3
  4113. <7>[  144.016937] touchkey press keycode:158
  4114. <4>[  144.239074] [TKEY] DATA0 11
  4115. <7>[  144.240966] touchkey release keycode:158
  4116. <4>[  145.249145] [TKEY] DATA0 3
  4117. <7>[  145.250946] touchkey press keycode:158
  4118. <4>[  145.431549] [TKEY] DATA0 11
  4119. <7>[  145.433410] touchkey release keycode:158
  4120. <4>[  145.969787] [TKEY] DATA0 3
  4121. <7>[  145.971588] touchkey press keycode:158
  4122. <4>[  146.217163] [TKEY] DATA0 11
  4123. <7>[  146.219085] touchkey release keycode:158
  4124. <4>[  146.469970] [TKEY] DATA0 3
  4125. <7>[  146.471771] touchkey press keycode:158
  4126. <4>[  146.633758] [TKEY] DATA0 11
  4127. <7>[  146.635681] touchkey release keycode:158
  4128. <7>[  147.238708] [TSP] ID-0,UD:1
  4129. <7>[  147.359130] [TSP] ID-0,UD:0
  4130. <7>[  147.637817] [TSP] ID-0,UD:1
  4131. <7>[  147.788818] [TSP] ID-0,UD:0
  4132. <4>[  148.270050] [TKEY] DATA0 4
  4133. <7>[  148.271820] touchkey press keycode:217
  4134. <4>[  148.497924] [TKEY] DATA0 12
  4135. <7¾[  148.499847] touchkey release keycode:217
  4136. <4>[  148.637573] [TKEY] DATA0 4
  4137. <7>[  148.639373] touchkey press keycode:217
  4138. <4>[  148.843963] [TKEY] DATA0 12
  4139. <7>[  148.845825] touchkey release keycode:217
  4140. <4>[  149.078796] [TKEY] DATA0 2
  4141. <7>[  149.080688] touchkey press keycode:172
  4142. <4>[  149.241882] [TKEY] DATA0 10
  4143. <7>[  149.243743] touchkey release keycode:172
  4144. <4>[  149.348876] [TKEY] DATA0 2
  4145. <7>[  149.350708] touchkey press keycode:172
  4146. <4>[  149.549&82] [TKEY] DATA0 10
  4147. <7>[  149.551574] touchkey release keycode:172
  4148. <4>[  149.721954] [TKEY] DATA0 1
  4149. <7>[  149.723724] touchkey press keycode:139
  4150. <4>[  149.884368] [TKEY] DATA0 9
  4151. <7>[  149.886199] touchkey release keycode:139
  4152. <7>[  150.320312] [TSP] ID-0,UD:1
  4153. <7>[  150.548156] [TSP] ID-0,UD:0
  4154. <7>[  150.840942] [TSP] ID-0,UD:1
  4155. <7>[  150.917510] [TSP] ID-0,UD:2
  4156. <7>[  150.932708] [TSP] ID-0,UD:2
  4157. <7>[  150.948028] [TSP] ID-0,UD:2
  4158. <7>[  150.963256] [TSP] ID-0,UD:2
  4159. <7>[  150.978576] [TSP] ID-0,UD:2
  4160. <7>[  150.993804] [TSP] ID-0,UD:2
  4161. <7>[  151.009124] [TSP] ID-0,UD:2
  4162. <7>[  151.025207] [TSP] ID-0,UD:2
  4163. <7>[  151.040435] [TSP] ID-0,UD:2
  4164. <7>[  151.055664] [TSP] ID-0,UD:2
  4165. <7>[  151.098602] [TSP] ID-0,UD:0
  4166. <7>[  151.266876] [TSP] ID-0,UD:1
  4167. <7>[  151.312774] [TSP] ID-0,UD:2
  4168. <7>[  151.327911] [TSP] ID-0,UD:2
  4169. <7>[  151.343170] [TSP] ID-0,UD:2
  4170. <7>[  151.358398] [TSP] ID-0,UD:2
  4171. <7>[  151.373687] [TSP] ID-0,UD:2
  4172. <7>[  151.388916] [TSP] ID-0,UD:2
  4173. <7>[  151.404266] [TSP] ID-0,UD:2
  4174. <7>[  151.419464] [TSP] ID-0,UD:2
  4175. <7>[  151.435516] [TSP] ID-0,UD:2
  4176. <7>[  151.450775] [TSP] ID-0,UD:2
  4177. <7>[  151.466064] [TSP] ID-0,UD:2
  4178. <7>[  151.509124] [TSP] ID-0,UD:0
  4179. <7>[  151.650726] [TSP] ID-0,UD:1
  4180. <7>[  151.712158] [TSP] ID-0,UD:2
  4181. <7>[  151.727325] [TSP] ID-0,UD:2
  4182. <7>[  151.742736] [TSP] ID-0,UD:2
  4183. <7>[  151.757904] [TSP] ID-0,UD:2
  4184. <7>[  151.773193] [TSP] ID-0,UD:2
  4185. <7>[  151.788421] [TSP] ID-0,UD:2
  4186. <7>[  151.803649] [TSP] ID-0,UD:2
  4187. <7>[  151.819610] [TSP] ID-0,UD:2
  4188. <7>[  151.834808] [TSP] ID-0,UD:2
  4189. <7>[  151.850158] [TSP] ID-0,UD:2
  4190. <7>[  151.865264] [TSP] ID-0,UD:2
  4191. <7>[  151.908325] [TSP] ID-0,UD:0
  4192. <7>[  152.145172] [TSP] ID-0,UD:1
  4193. <7>[  152.206268] [TSP] ID-0,UD:2
  4194. <7>[  152.222595] [TSP] ID-0,UD:2
  4195. <7>[  152.237762] [TSP] ID-0,UD:2
  4196. <7>[  152.253021] [TSP] ID-0,UD:2
  4197. <7>[  152.268310] [TSP] ID-0,UD:2
  4198. <7>[  152.283538] [TSP] ID-0,UD:2
  4199. <7>[  152.298797] [TSP] ID-0,UD:2
  4200. <7>[  152.314147] [TSP] ID-0,UD:2
  4201. <7>[  152.329345] [TSP] ID-0,UD:2
  4202. <7>[  152.344635] [TSP] ID-0,UD:2
  4203. <7>[  152.359893] [TSP] ID-0,UD:2
  4204. <7>[  152.375152] [TSP] ID-0,UD:2
  4205. <7>[  152.390380] [TSP] ID-0,UD:2
  4206. <7>[  152.433380] [TSP] ID-0,UD:0
  4207. <4>[  153.510589] [TKEY] DATA0 4
  4208. <7>[  153.512390] touchkey press keycode:217
  4209. <4>[  153.700653] [TKEY] DATA0 12
  4210. <7>[  153.702514] touchkey release keycode:217
  4211. <4>[  153.916259] [TKEY] DATA0 3
  4212. <7>[  153.918029] touchkey press keycode:158
  4213. <4>[  154.102355] [TKEY] DATA0 11
  4214. <7>[  154.104309] touchkey release keycode:158
  4215. <4>[  155.046020] [TKEY] DATA0 3
  4216. <7>[  155.047790] touchkey press keycode:158
  4217. <4>[  155.192626] [TKEY] DATA0 11
  4218. <7>[  155.194488] touchkey release keycode:158
  4219. <4>[  155.688690] [TKEY] DATA0 3
  4220. <7>[  155.690490] touchkey press keycode:158
  4221. <4>[  156.591339] [TKEY] DATA0 11
  4222. <7>[  156.593200] touchkey release keycode:158
  4223. <4>[  156.863037] [TKEY] DATA0 3
  4224. <7>[  156.864868] touchkey press keycode:158
  4225. <4>[  157.094268] [TKEY] DATA0 11
  4226. <7>[  157.096130] touchkey release keycode:158
  4227. <4>[  157.324645] [TKEY] DATA0 3
  4228. <7>[  157.326477] touchkey press keycode:158
  4229. <4>[  157.929290] [TKEY] DATA0 11
  4230. <7>[  157.931182] touchkey release keycode:158
  4231. <4>[  158.101989] [TKEY] DATA0 3
  4232. <7>[  158.103790] touchkey press keycode:158
  4233. <4>[  159.625030] [TKEY] DATA0 11
  4234. <7>[  159.625091] touchkey release keycode:158
  4235. <4>[  159.908233] [TKEY] DATA0 3
  4236. <7>[  159.910034] touchkey press keycode:158
  4237. <4>[  160.945556] [TKEY] DATA0 11
  4238. <7>[  160.947479] touchkey release keycode:158
  4239. <7>[  161.186462] [TSP] ID-0,UD:1
  4240. <7>[  161.247650] [TSP] ID-0,UD:2
  4241. <7>[  161.263763] [TSP] ID-0,UD:2
  4242. <7>[  161.279052] [TSP] ID-0,UD:2
  4243. <7>[  161.294281] [TSP] ID-0,UD:2
  4244. <7>[  161.309539] [TSP] ID-0,UD:2
  4245. <7>[  161.324859] [TSP] ID-0,UD:2
  4246. <7>[  161.340057] [TSP] ID-0,UD:2
  4247. <7>[  161.355224] [TSP] ID-0,UD:2
  4248. <7>[  161.398162] [TSP] ID-0,UD:0
  4249. <7>[  161.665161] [TSP] ID-0,UD:1
  4250. <7>[  161.742340] [TSP] ID-0,UD:2
  4251. <7>[  161.757751] [TSP] ID-0,UD:2
  4252. <7>[  161.773040] [TSP] ID-0,UD:2
  4253. <7>[  161.788360] [TSP] ID-0,UD:2
  4254. <7>[  161.803619] [TSP] ID-0,UD:2
  4255. <7>[  161.818817] [TSP] ID-0,UD:2
  4256. <7>[  161.834197] [TSP] ID-0,UD:2
  4257. <7>[  161.849395] [TSP] ID-0,UD:2
  4258. <7>[  161.865173] [TSP] ID-0,UD:2
  4259. <7>[  161.908264] [TSP] ID-0,UD:0
  4260. <7>[  162.200347] [TSP] ID-0,UD:1
  4261. <7>[  162.246246] [TSP] ID-0,UD:2
  4262. <7>[  162.262237] [TSP] ID-0,UD:2
  4263. <7>[  162.277526] [TSP] ID-0,UD:2
  4264. <7>[  162.292785] [TSP] ID-0,UD:2
  4265. <7>[  162.308044] [TSP] ID-0,UD:2
  4266. <7>[  162.323394] [TSP] ID-0,UD:2
  4267. <7>[  162.338684] [TSP] ID-0,UD:2
  4268. <7>[  162.381652] [TSP] ID-0,UD:0
  4269. <7>[  162.798248] [TSP] ID-0,UD:1
  4270. <7>[  162.876251] [TSP] ID-0,UD:2
  4271. <7>[  162.891571] [TSP] ID-0,UD:2
  4272. <7>[  162.906860] [TSP] ID-0,UD:2
  4273. <7>[  162.922088] [TSP] ID-0,UD:2
  4274. <7>[  162.937377] [TSP] ID-0,UD:2
  4275. <7>[  162.952636] [TSP] ID-0,UD:2
  4276. <7>[  162.967956] [TSP] ID-0,UD:2
  4277. <7>[  162.983215] [TSP] ID-0,UD:2
  4278. <7>[  162.998565] [TSP] ID-0,UD:2
  4279. <7>[  163.041503] [TSP] ID-0,UD:0
  4280. <4>[  166.441864] msm_otg_irq: IRQ state: b_peripheral   otgsc = 92c0120
  4281. <6>[  166.447113] [OTG] msm_otg_start_peripheral, on = 0
  4282. <4>[  166.451934] off mute_switch
  4283. <6>[  166.454559] usb_do_work: usb: notify offline
  4284. <6>[  166.459960] fsa9480 5-0025: fsa9480_Check_AVDock intr: 0x2
  4285. <6>[  166.465179] sec_bat_measure_work : dcin nok, but still charging, just disable charging!
  4286. <6>[  166.472686] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
  4287. <3>[  166.477081] fsa9480_usb_cb attached 0
  4288. <3>[  166.480804] [TSP] mxt224_ta_probe
  4289. <4>[  166.484375] tsp_set_unknown_charging_cable 0
  4290. <3>[  166.496490] [TSP]TA_probe MXT224E T48 Byte2 is 114
  4291. <6>[  166.500427] sec-battery sec-battery: sec_bat_set_property: cable was changed(0)
  4292. <7>[  166.517700] usb: composite_disconnect
  4293. <3>[  166.520568] [TSP] mxt224_ta_probe
  4294. <7>[  166.523834] usb: android_disconnect force_disconnect
  4295. <7>[  166.528808] usb: android_disconnect schedule_work
  4296. <7>[  166.539306] usb: android_work config=  (null),connected=0,sw_connected=1
  4297. <3>[  166.546203] [TSP]TA_probe MXT224E T48 Byte2 is 114
  4298. <6>[  166.550140]  sec_bat_handle_unknown_disable : cable_type = 0
  4299. <6>[  166.555694] smb328a 15-0034: smb328a_disable_charging :
  4300. <6>[  166.561187] android_work: sent uevent USB_STATE=DISCONNECTED
  4301. <6>[  166.572631] smb328a 15-0034: smb328a_disable_charging : reg (0x31) = 0xa9
  4302. <6>[  166.573364] smb328a_disable_charging : => reg (0x31) = 0xb9
  4303. <6>[  166.573394] smb328a 15-0034: smb328a_watchdog_control : (0)
  4304. <6>[  166.574218] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4f
  4305. <6>[  166.574951] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4d
  4306. <6>[  166.702880] smb328a_int_work_func
  4307. <6>[  166.703308] smb328a_int_work_func : reg (0x37) = 0x2
  4308. <6>[  166.703765] smb328a_int_work_func : reg (0x36) = 0x0
  4309. <6>[  166.704193] sec_bat_set_property: 2
  4310. <6>[  166.704223] sec_bat_set_property: charger removed!!
  4311. <3>[  166.779571] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  4312. <6>[  166.785614] msm_otg_suspend: usb in low power mode
  4313. <6>[  167.009948] smb328a 15-0034: smb328a_disable_charging :
  4314. <6>[  167.014678] smb328a 15-0034: smb328a_disable_charging : reg (0x31) = 0xb9
  4315. <6>[  167.026214] smb328a_disable_charging : => reg (0x31) = 0xb9
  4316. <6>[  167.039520] smb328a 15-0034: smb328a_watchdog_control : (0)
  4317. <6>[  167.044921] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
  4318. <6>[  167.059539] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4d
  4319. <6>[  167.779174] smb328a_int_work_func
  4320. <6>[  167.782043] smb328a_int_work_func : reg (0x37) = 0x0
  4321. <6>[  167.786865] smb328a_int_work_func : reg (0x36) = 0x3
  4322. <6>[  167.791900] sec_bat_set_property: 1
  4323. <6>[  167.794891] sec_bat_set_property: charger inserted!!
  4324. <6>[  167.828552] msm_otg_resume: usb exited from low power mode
  4325. <4>[  167.833312] msm_otg_irq: IRQ state: b_idle     otgsc = 92c0f20
  4326. <6>[  167.838684] [OTG] msm_otg_start_peripheral, on = 1
  4327. <6>[  167.931396] fsa9480 5-0025: fsa9480_Check_AVDock intr: 0x1
  4328. <6>[  167.936859] fsa9480 5-0025: dev1: 0x4, dev2: 0x0
  4329. <6>[  167.940643] fsa9480 5-0025: usb connect
  4330. <3>[  167.944366] fsa9480_usb_cb attached 1
  4331. <3>[  167.947998] [TSP] mxt224_ta_probe
  4332. <3>[  167.959930] [TSP]TA_probe MXT224E T48 Byte2 is 114
  4333. <6>[  167.963775] sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
  4334. <3>[  168.001800] [TSP] Calibration!!!!!!
  4335. <3>[  168.029815] [TSP] Calibration End!!!!!!
  4336. <3>[  168.032714] [TSP] Clearing unused slots
  4337. <6>[  168.079559] usb_reset: usb: notify offline
  4338. <7>[  168.082733] usb: composite_disconnect
  4339. <7>[  168.086364] usb: android_disconnect schedule_work
  4340. <7>[  168.091491] usb: android_work config=  (null),connected=0,sw_connected=0
  4341. <6>[  168.109619] android_work: did not send uevent (0 0   (null))
  4342. <4>[  168.221313] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9202f20
  4343. <7>[  168.376373] usb: android_work config=  (null),connected=1,sw_connected=0
  4344. <4>[  168.382232] msm_otg_irq: IRQ state: b_peripheral   otgsc = 9200f20
  4345. <6>[  168.388458] android_work: sent uevent USB_STATE=CONNECTED
  4346. <6>[  168.469543] smb328a 15-0034: smb328a_set_charging_current :
  4347. <6>[  168.474609] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0x0
  4348. <6>[  168.490234] smb328a_set_command_reg : => reg (0x31) = 0xa9
  4349. <6>[  168.495605] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x31
  4350. <6>[  168.511047] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x0) = 0x17
  4351. <6>[  168.518157] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x5
  4352. <6>[  168.535308] msm_hsusb msm_hsusb: PCI intr missedset speed explictly
  4353. <6>[  168.541473] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0x10
  4354. <6>[  168.548645] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
  4355. <6>[  168.561523] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
  4356. <6>[  168.562255] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
  4357. <6>[  168.562713] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x44
  4358. <6>[  168.563446] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
  4359. <6>[  168.593048] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x8b
  4360. <7>[  168.593383] usb: set_config_number single config
  4361. <7>[  168.593414] usb: set_interface_count next_interface_id=1
  4362. <6>[  168.594573] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
  4363. <6>[  168.595458] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x5c
  4364. <6>[  168.596221] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0x4d
  4365. <6>[  168.596649] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0x36
  4366. <6>[  168.597381] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x7) = 0xf6
  4367. <6>[  168.597808] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
  4368. <6>[  168.598266] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
  4369. <6>[  168.598999] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
  4370. <6>[  168.599029] smb328a 15-0034: smb328a_get_input_current_limit :
  4371. <6>[  168.599456] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0x10
  4372. <6>[  168.599517] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 450, data = 0
  4373. <6>[  168.599975] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200
  4374. <6>[  168.600799] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0x17
  4375. <6>[  168.601531] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0x17
  4376. <6>[  168.601959] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6
  4377. <6>[  168.602691] smb328a 15-0034: smb328a_set_top_off : => reg (0x7) = 0xf6
  4378. <6>[  168.603515] smb328a 15-0034: smb328a_enable_charging :
  4379. <6>[  168.603942] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xa9
  4380. <6>[  168.604675] smb328a_enable_charging : => reg (0x31) = 0xa9
  4381. <6>[  168.604705] smb328a 15-0034: smb328a_watchdog_control : (1)
  4382. <6>[  168.605529] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
  4383. <6>[  168.606262] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f
  4384. <6>[  168.773223] smb328a_int_work_func
  4385. <6>[  168.773651] smb328a_int_work_func : reg (0x37) = 0x0
  4386. <6>[  168.774078] smb328a_int_work_func : reg (0x36) = 0x5
  4387. <6>[  168.774505] sec_bat_set_property: 1
  4388. <6>[  168.774505] sec_bat_set_property: charger inserted!!
  4389. <7>[  169.984191] usb: set_config_number single config
  4390. <7>[  169.987884] usb: set_interface_count next_interface_id=1
  4391. <7>[  169.994934] usb: set_config_number single config
  4392. <7>[  169.998596] usb: set_interface_count next_interface_id=1
  4393. <4>[  178.914215] [TKEY] DATA0 3
  4394. <7>[  178.916076] touchkey press keycode:158
  4395. <4>[  180.548156] [TKEY] DATA0 11
  4396. <7>[  180.550048] touchkey release keycode:158
  4397. <7>[  182.503845] [TSP] ID-0,UD:1
  4398. <7>[  182.581237] [TSP] ID-0,UD:2
  4399. <7>[  182.596618] [TSP] ID-0,UD:2
  4400. <7>[  182.611877] [TSP] ID-0,UD:2
  4401. <7>[  182.627227] [TSP] ID-0,UD:2
  4402. <7>[  182.642456] [TSP] ID-0,UD:2
  4403. <7>[  182.657775] [TSP] ID-0,UD:2
  4404. <7>[  182.673065] [TSP] ID-0,UD:2
  4405. <7>[  182.688385] [TSP] ID-0,UD:2
  4406. <7>[  182.703704] [TSP] ID-0,UD:2
  4407. <7>[  182.718994] [TSP] ID-0,UD:2
  4408. <7>[  182.734313] [TSP] ID-0,UD:2
  4409. <7>[  182.749603] [TSP] ID-0,UD:2
  4410. <7>[  182.765716] [TSP] ID-0,UD:2
  4411. <7>[  182.781036] [TSP] ID-0,UD:2
  4412. <7>[  182.796295] [TSP] ID-0,UD:2
  4413. <7>[  182.811523] [TSP] ID-0,UD:2
  4414. <7>[  182.826843] [TSP] ID-0,UD:2
  4415. <7>[  182.842041] [TSP] ID-0,UD:2
  4416. <7>[  182.857299] [TSP] ID-0,UD:2
  4417. <7>[  182.872436] [TSP] ID-0,UD:2
  4418. <7>[  182.915496] [TSP] ID-0,UD:0
  4419. <4>[  185.229400] [TKEY] DATA0 3
  4420. <7>[  185.231231] touchkey press keycode:158
  4421. <4>[  187.850402] [TKEY] DATA0 11
  4422. <7>[  187.852264] touchkey release keycode:158
  4423. <4>[  187.945983] [TKEY] DATA0 3
  4424. <7>[  187.947845] touchkey press keycode:158
  4425. <4>[  188.031341] [TKEY] DATA0 11
  4426. <7>[  188.033203] touchkey release keycode:158
  4427. <4>[  188.103149] [TKEY] DATA0 3
  4428. <7>[  188.105010] touchkey press keycode:158
  4429. <4>[  189.910919] [TKEY] DATA0 11
  4430. <7>[  189.912780] touchkey release keycode:158
  4431. <4>[  190.153106] [TKEY] DATA0 1
  4432. <7>[  190.154876] touchkey press keycode:139
  4433. <4>[  190.281250] [TKEY] DATA0 9
  4434. <7>[  190.283020] touchkey release keycode:139
  4435. <4>[  190.335479] [TKEY] DATA0 1
  4436. <7>[  190.337280] touchkey press keycode:139
  4437. <4>[  192.466339] [TKEY] DATA0 9
  4438. <7>[  192.468200] touchkey release keycode:139
  4439. <4>[  193.719238] msm_otg_irq: IRQ state: b_peripheral   otgsc = 92c0120
  4440. <6>[  193.724426] [OTG] msm_otg_start_peripheral, on = 0
  4441. <4>[  193.729217] off mute_switch
  4442. <6>[  193.732116] usb_do_work: usb: notify offline
  4443. <6>[  193.737335] fsa9480 5-0025: fsa9480_Check_AVDock intr: 0x2
  4444. <6>[  193.742828] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
  4445. <3>[  193.746490] fsa9480_usb_cb attached 0
  4446. <3>[  193.750213] [TSP] mxt224_ta_probe
  4447. <7>[  193.758270] usb: composite_disconnect
  4448. <3>[  193.764801] [TSP]TA_probe MXT224E T48 Byte2 is 114
  4449. <6>[  193.768707] sec-battery sec-battery: sec_bat_set_property: cable was changed(0)
  4450. <7>[  193.776123] usb: android_disconnect force_disconnect
  4451. <7>[  193.780944] usb: android_disconnect schedule_work
  4452. <7>[  193.799804] usb: android_work config=  (null),connected=0,sw_connected=1
  4453. <6>[  193.805725] android_work: sent uevent USB_STATE=DISCONNECTED
  4454. <6>[  193.976226] smb328a_int_work_func
  4455. <6>[  193.979034] smb328a_int_work_func : reg (0x37) = 0x2
  4456. <6>[  193.983947] smb328a_int_work_func : reg (0x36) = 0x0
  4457. <6>[  193.988922] sec_bat_set_property: 2
  4458. <6>[  193.991973] sec_bat_set_property: charger removed!!
  4459. <3>[  194.029571] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  4460. <6>[  194.035552] msm_otg_suspend: usb in low power mode
  4461. <6>[  194.269927] smb328a 15-0034: smb328a_disable_charging :
  4462. <6>[  194.274688] smb328a 15-0034: smb328a_disable_charging : reg (0x31) = 0xa9
  4463. <6>[  194.289825] smb328a_disable_charging : => reg (0x31) = 0xb9
  4464. <6>[  194.294525] smb328a 15-0034: smb328a_watchdog_control : (0)
  4465. <6>[  194.310272] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4f
  4466. <6>[  194.316772] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4d
  4467. <4>[  202.416107] resout_irq_handler PMIC Initiated shutdown
  4468. <3>[  202.420318] PMIC Initiated shutdown cpu_power_off cpu=0
  4469. <2>[  202.425506] Powering off the SoC
  4470. <3>[  202.428802] set_dload_mode <0> ( C0174ED0 )
  4471. <3>[  202.432891] pm8xxx_reset_pwr_off, [1]
  4472. <3>[  202.436523] pm8xxx_reset_pwr_off, [2]
  4473. <3>[  202.440246] pm8xxx_reset_pwr_off, [3]
  4474. <3>[  202.444030] pm8xxx_reset_pwr_off, [4]
  4475. <3>[  202.447479] pm8xxx_reset_pwr_off, [5]
  4476. <3>[  202.475250] pm8xxx_reset_pwr_off, [6]
  4477. <3>[  202.477966] pm8xxx_reset_pwr_off, [7]
  4478. <3>[  202.481597] pm8xxx_reset_pwr_off, [8]
  4479. <3>[  202.485321] pm8xxx_reset_pwr_off is called
  4480. <3>[  202.489318] Calling scm to disable arbiter
  4481. [0] ========================================
  4482. [0] welcome to lk
  4483. [0] Original Log Magic = 0x4d474f4c
  4484. [0] calling constructors
  4485. [0] initializing heap
  4486. [0] initializing threads
  4487. [0] initializing dpc
  4488. [0] initializing timers
  4489. [0] creating bootstrap completion thread
  4490. [0] creating bootstrap progress monitor thread
  4491. [10] top of bootstrap3()
  4492. [10] top of bootstrap2()
  4493. [10] initializing platform
  4494. [10] initializing target
  4495. [390] calling apps_init()
  4496. [400] aboot_init()
  4497. [400] aboot_banner()
  4498. [420] power on reason = 0x100, msm watchdog status = 0x4
  4499. [620] aboot_check_rtc_alarm_boot()
  4500. [620] aboot_dev_init()
  4501. [620] init_microusb_ic()
  4502. [0] ========================================
  4503. [0] welcome to lk
  4504. [0] Original Log Magic = 0x4d474f4c
  4505. [0] calling constructors
  4506. [0] initializing heap
  4507. [0] initializing threads
  4508. [0] initializing dpc
  4509. [0] initializing timers
  4510. [0] creating bootstrap completion thread
  4511. [0] creating bootstrap progress monitor thread
  4512. [10] top of bootstrap3()
  4513. [10] top of bootstrap2()
  4514. [10] initializing platform
  4515. [10] initializing target
  4516. [390] calling apps_init()
  4517. [390] aboot_init()
  4518. [390] aboot_banner()
  4519. [410] power on reason = 0x100, msm watchdog status = 0x4
  4520. [610] aboot_check_rtc_alarm_boot()
  4521. [610] aboot_dev_init()
  4522. [610] init_microusb_ic()
  4523. [1410] init_microusb_ic success1
  4524. [1410] init_microusb_ic success2
  4525. [1410] smb328a_init_charger : log(1)
  4526. [1410] smb328a_init_charger : log(2)
  4527. [1420] smb328a_init_charger : is_reboot_mode = 0, vcell = 4077
  4528. [1420] check valid dcin (0x33) = 0x0
  4529. [1420] no dcin, skip init_charger
  4530. [1430] battery pole check!
  4531. [1440] fuelguage : soc = 92%, vcell = 4077mV
  4532. [1450] fuelguage : rcomp(c71f) ==?? 0xc71f
  4533. [1460] 9573 = ( 407700 - 300886 ) * 8963 / 100000
  4534. [1990] HW_REV = 0xd
  4535. [1990] reboot_mode = 0x86d84549
  4536. [1990] debuglevel = 0x574f4c44
  4537. [1990] do key check
  4538. [2010] VolUp & VolDown - RECOVERYMODE_BY_KEY
  4539. [2010] aboot_check_lpm : rb = 0, chg = 0, av = 0
  4540. [2020] get mpp11 state (2) = 1
  4541. [2030] enter normal booting mode
  4542. [2040] boot_linux_from_mmc()
  4543. [3590] kernel  @ 40408000 (5213784 bytes)
  4544. [3590] ramdisk @ 41800000 (3701785 bytes)
  4545. [3590] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13'
  4546. [3590] Booting Linux
  4547. [3590] boot_linux()
  4548. [3610] booting linux @ 0x40408000, ramdisk @ 0x41800000 (3701785)
  4549. [3610] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13
  4550. [3610] entry()
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!