Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@BL-P001-sdcard:~]# dmesg
- [ 0.000000] Booting Linux on physical CPU 0xf00
- [ 0.000000] Linux version 4.19.111 (joshua@anima) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #52 SMP PREEMPT Wed Mar 13 16:55:19 EDT 2024
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: v05 Bamboo Lab 3D Printer P001 Board
- [ 0.000000] earlycon: uart8250 at MMIO32 0xff570000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] Reserved memory: created CMA memory pool at 0x1e800000, size 24 MiB
- [ 0.000000] OF: reserved mem: initialized node isp, compatible id shared-dma-pool
- [ 0.000000] Reserved memory: created CMA memory pool at 0x1e000000, size 8 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] On node 0 totalpages: 130488
- [ 0.000000] Normal zone: 1024 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 130488 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 15 pages/cpu s32268 r8192 d20980 u61440
- [ 0.000000] pcpu-alloc: s32268 r8192 d20980 u61440 alloc=15*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129464
- [ 0.000000] Kernel command line: user_debug=31 storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal boot_reason=cold mp_state=production fuse.programmed=1 earlycon=uart8250,mmio32,0xff570000 console=ttyFIQ0 rootwait snd_aloop.index=7 fbcon=rotate:3 x1plus_boot=true androidboot.slot_suffix=_a bbl_serial=00M00A2xxxxxxx -- 00.00.28.55.squashfs 1.0.squashfs bbl_screen-1.0.squashfs rw.ext4
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 467408K/521952K available (9216K kernel code, 555K rwdata, 2384K rodata, 1024K init, 304K bss, 21776K reserved, 32768K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
- [ 0.000000] lowmem : 0xb0000000 - 0xd0000000 ( 512 MB)
- [ 0.000000] pkmap : 0xafe00000 - 0xb0000000 ( 2 MB)
- [ 0.000000] modules : 0xaf000000 - 0xafe00000 ( 14 MB)
- [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (10208 kB)
- [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
- [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 556 kB)
- [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 305 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] random: random: get_random_bytes called from start_kernel+0x324/0x4ac with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000759] Switching to timer-based delay loop, resolution 41ns
- [ 0.002709] Console: colour dummy device 80x30
- [ 0.003177] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
- [ 0.004162] pid_max: default: 4096 minimum: 301
- [ 0.004773] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.005422] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.006848] CPU: Testing write buffer coherency: ok
- [ 0.007700] /cpus/cpu@f00 missing clock-frequency property
- [ 0.008229] /cpus/cpu@f01 missing clock-frequency property
- [ 0.008788] /cpus/cpu@f02 missing clock-frequency property
- [ 0.009315] /cpus/cpu@f03 missing clock-frequency property
- [ 0.009856] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
- [ 0.011156] Setting up static identity map for 0x100000 - 0x100060
- [ 0.011931] rcu: Hierarchical SRCU implementation.
- [ 0.013219] smp: Bringing up secondary CPUs ...
- [ 0.015220] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
- [ 0.016890] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
- [ 0.018543] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
- [ 0.018693] smp: Brought up 1 node, 4 CPUs
- [ 0.020737] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 0.021320] CPU: All CPU(s) started in SVC mode.
- [ 0.022538] devtmpfs: initialized
- [ 0.050003] Unpacking initramfs...
- [ 0.050339] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.051076] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.052051] futex hash table entries: 16 (order: -2, 1024 bytes)
- [ 0.052760] pinctrl core: initialized pinctrl subsystem
- [ 0.054592] NET: Registered protocol family 16
- [ 0.055899] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.057977] register kpanic driver ok
- [ 0.058972] cpuidle: using governor menu
- [ 0.059361] Registered FIQ tty driver
- [ 0.060420] hw-breakpoint: Failed to enable monitor mode on CPU 0.
- [ 0.063939] console [pstore-1] enabled
- [ 0.064590] pstore: Registered ramoops as persistent store backend
- [ 0.065171] ramoops: attached 0x100000@0x8000000, ecc: 0/0
- [ 0.069073] kpanic ffc50000.kpanic: using Device Tree
- [ 0.069582] kpanic ffc50000.kpanic: emmc base 0xd0948000
- [ 0.070131] kpanic ffc50000.kpanic: cru base 0xd081d000
- [ 0.070673] kernel panic handler initialized
- [ 0.095515] gpio gpiochip0: (gpio0): added GPIO chardev (254:0)
- [ 0.095666] gpiochip_setup_dev: registered GPIOs 0 to 31 on device: gpiochip0 (gpio0)
- [ 0.095957] gpio gpiochip1: (gpio1): added GPIO chardev (254:1)
- [ 0.096081] gpiochip_setup_dev: registered GPIOs 32 to 63 on device: gpiochip1 (gpio1)
- [ 0.096281] gpio gpiochip2: (gpio2): added GPIO chardev (254:2)
- [ 0.096399] gpiochip_setup_dev: registered GPIOs 64 to 95 on device: gpiochip2 (gpio2)
- [ 0.096607] gpio gpiochip3: (gpio3): added GPIO chardev (254:3)
- [ 0.096722] gpiochip_setup_dev: registered GPIOs 96 to 127 on device: gpiochip3 (gpio3)
- [ 0.096966] gpio gpiochip4: (gpio4): added GPIO chardev (254:4)
- [ 0.097077] gpiochip_setup_dev: registered GPIOs 128 to 129 on device: gpiochip4 (gpio4)
- [ 0.117906] cryptd: max_cpu_qlen set to 1000
- [ 0.119435] fiq debugger fiq mode enabled
- [ 0.120289] console [ttyFIQ0] enabled
- [ 0.120975] bootconsole [uart8250] disabled
- [ 0.121706] Registered fiq debugger ttyFIQ0
- [ 0.123373] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vccsys[0]'
- [ 0.123899] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-1v8[0]'
- [ 0.124150] vccio_sdio: regulator get failed, ret=-517
- [ 0.124337] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vdd_logic[0]'
- [ 0.124366] vdd_logic: supplied by vcc5v0_sys
- [ 0.125441] rk_iommu ffb00f00.iommu: version = 1
- [ 0.126103] rk_iommu ffb60e00.iommu: version = 1
- [ 0.126783] rk_iommu ffb80480.iommu: version = 1
- [ 0.127375] rk_iommu ffb90800.iommu: version = 1
- [ 0.127897] rk_iommu ffbb0f00.iommu: version = 1
- [ 0.128949] SCSI subsystem initialized
- [ 0.129295] usbcore: registered new interface driver usbfs
- [ 0.129401] usbcore: registered new interface driver hub
- [ 0.129584] usbcore: registered new device driver usb
- [ 0.129698] media: Linux media interface: v0.10
- [ 0.129774] videodev: Linux video capture interface: v2.00
- [ 0.129848] pps_core: LinuxPPS API ver. 1 registered
- [ 0.129871] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.129914] PTP clock support registered
- [ 0.131368] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.132124] Bluetooth: Core ver 2.22
- [ 0.132218] NET: Registered protocol family 31
- [ 0.132243] Bluetooth: HCI device and connection manager initialized
- [ 0.132274] Bluetooth: HCI socket layer initialized
- [ 0.132308] Bluetooth: L2CAP socket layer initialized
- [ 0.132373] Bluetooth: SCO socket layer initialized
- [ 0.132900] rockchip-cpuinfo cpuinfo: SoC : 11260000
- [ 0.132935] rockchip-cpuinfo cpuinfo: Serial : 0f4bxxxxxxxxxx3a9
- [ 0.134254] clocksource: Switched to clocksource arch_sys_counter
- [ 0.149294] NET: Registered protocol family 2
- [ 0.150214] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
- [ 0.150310] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.150395] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.150509] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.150662] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.150720] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.150937] NET: Registered protocol family 1
- [ 0.151776] RPC: Registered named UNIX socket transport module.
- [ 0.151809] RPC: Registered udp transport module.
- [ 0.151828] RPC: Registered tcp transport module.
- [ 0.151846] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.154014] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.156765] Initialise system trusted keyrings
- [ 0.157044] workingset: timestamp_bits=29 max_order=17 bucket_order=0
- [ 0.164847] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.165874] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 0.167082] Key type cifs.spnego registered
- [ 0.167141] Key type cifs.idmap registered
- [ 0.167174] fuse init (API version 7.27)
- [ 0.168470] NILFS version 2 loaded
- [ 0.169289]
- [ 0.169289] TEE Core Framework initialization (ver 1:0.1)
- [ 0.169347] TEE armv7 Driver initialization
- [ 0.169910] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
- [ 0.169948] TEE core: Alloc the misc device "opteearmtz00" (id=0)
- [ 0.170315] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=63)
- [ 0.172937] Key type asymmetric registered
- [ 0.172974] Asymmetric key parser 'x509' registered
- [ 0.173052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
- [ 0.173080] io scheduler noop registered
- [ 0.173101] io scheduler deadline registered
- [ 0.173178] io scheduler cfq registered (default)
- [ 0.173204] io scheduler mq-deadline registered
- [ 0.173225] io scheduler kyber registered
- [ 0.173452] io scheduler bfq registered
- [ 0.176887] rockchip-usb2phy-naneng ff4c0000.usb2-phy: GPIO lookup for consumer vup
- [ 0.176901] rockchip-usb2phy-naneng ff4c0000.usb2-phy: using device tree for GPIO lookup
- [ 0.176944] of_get_named_gpiod_flags: parsed 'vup-gpios' property of node '/usb2-phy@ff4c0000[0]' - status (0)
- [ 0.176974] gpio gpiochip0: Persistence not supported for GPIO 17
- [ 0.177850] phy phy-ff4c0000.usb2-phy.1: Failed to get VBUS supply regulator
- [ 0.179760] rockchip-usb2phy-naneng ff4c8000.usb2-phy: GPIO lookup for consumer vup
- [ 0.179773] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using device tree for GPIO lookup
- [ 0.179801] of_get_named_gpiod_flags: can't parse 'vup-gpios' property of node '/usb2-phy@ff4c8000[0]'
- [ 0.179822] of_get_named_gpiod_flags: can't parse 'vup-gpio' property of node '/usb2-phy@ff4c8000[0]'
- [ 0.179835] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using lookup tables for GPIO lookup
- [ 0.179845] rockchip-usb2phy-naneng ff4c8000.usb2-phy: No GPIO consumer vup found
- [ 0.179932] rockchip-usb2phy-naneng ff4c8000.usb2-phy: failed to create phy
- [ 0.182653] pwm-backlight backlight: GPIO lookup for consumer enable
- [ 0.182666] pwm-backlight backlight: using device tree for GPIO lookup
- [ 0.182708] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/backlight[0]' - status (0)
- [ 0.182736] gpio gpiochip1: Persistence not supported for GPIO 31
- [ 0.182741] no flags found for enable
- [ 0.182765] pwm-backlight backlight: backlight supply power not found, using dummy regulator
- [ 0.182899] pwm-backlight backlight: Linked as a consumer to regulator.0
- [ 0.183296] mpp_service mpp-srv: 32ac426f5 author: Joshua Wise 2023-12-23 import: Rockchip RV1126_RV1109_SDK_2.2.2
- [ 0.183333] mpp_service mpp-srv: probe start
- [ 0.184308] iommu: Adding device ffb80000.rkvdec to group 2
- [ 0.184359] mpp_rkvdec ffb80000.rkvdec: Linked as a consumer to ffb80480.iommu
- [ 0.184564] mpp_rkvdec ffb80000.rkvdec: probing start
- [ 0.185200] mpp_rkvdec ffb80000.rkvdec: shared_niu_a is not found!
- [ 0.185278] rkvdec_init:1190: No niu aclk reset resource define
- [ 0.185312] mpp_rkvdec ffb80000.rkvdec: shared_niu_h is not found!
- [ 0.185334] rkvdec_init:1193: No niu hclk reset resource define
- [ 0.185647] mpp_rkvdec ffb80000.rkvdec: probing finish
- [ 0.186475] iommu: Adding device ffbb0000.rkvenc to group 4
- [ 0.186535] mpp_rkvenc ffbb0000.rkvenc: Linked as a consumer to ffbb0f00.iommu
- [ 0.186768] mpp_rkvenc ffbb0000.rkvenc: probing start
- [ 0.187412] mpp_rkvenc ffbb0000.rkvenc: venc regulator not ready, retry
- [ 0.187446] rkvenc_init:1202: failed to add venc devfreq
- [ 0.188614] iommu: Adding device ffb90400.vdpu to group 3
- [ 0.188677] mpp_vdpu2 ffb90400.vdpu: Linked as a consumer to ffb90800.iommu
- [ 0.188792] mpp_vdpu2 ffb90400.vdpu: probe device
- [ 0.189393] mpp_vdpu2 ffb90400.vdpu: reset_group->rw_sem_on=0
- [ 0.189441] mpp_vdpu2 ffb90400.vdpu: reset_group->rw_sem_on=0
- [ 0.189716] mpp_vdpu2 ffb90400.vdpu: probing finish
- [ 0.190434] iommu: Adding device ffb90000.vepu to group 3
- [ 0.190497] mpp_vepu2 ffb90000.vepu: Linked as a consumer to ffb90800.iommu
- [ 0.190634] mpp_vepu2 ffb90000.vepu: probe device
- [ 0.191174] mpp_vepu2 ffb90000.vepu: reset_group->rw_sem_on=0
- [ 0.191216] mpp_vepu2 ffb90000.vepu: reset_group->rw_sem_on=0
- [ 0.191550] mpp_vepu2 ffb90000.vepu: probing finish
- [ 0.192105] mpp_service mpp-srv: probe success
- [ 0.192221] Freeing initrd memory: 1416K
- [ 0.197406] dma-pl330 ff4e0000.dma-controller: Loaded driver for PL330 DMAC-241330
- [ 0.197451] dma-pl330 ff4e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
- [ 0.199476] rockchip-system-monitor rockchip-system-monitor: system monitor probe
- [ 0.199996] of_get_named_gpiod_flags: parsed 'time_sync_gpio' property of node '/time_sync[0]' - status (0)
- [ 0.201079] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
- [ 0.201928] ff410000.serial: ttyS1 at MMIO 0xff410000 (irq = 30, base_baud = 1500000) is a 16550A
- [ 0.202745] ff560000.serial: ttyS0 at MMIO 0xff560000 (irq = 33, base_baud = 1500000) is a 16550A
- [ 0.204877] random: fast init done
- [ 0.205293] random: crng init done
- [ 0.205784] iommu: Adding device ffb00000.vop to group 0
- [ 0.205851] rockchip-vop ffb00000.vop: Linked as a consumer to ffb00f00.iommu
- [ 0.209852] rockchip-drm display-subsystem: Linked as a consumer to ffb00000.vop
- [ 0.210856] rockchip-drm display-subsystem: Linked as a consumer to ffb30000.dsi
- [ 0.212147] rockchip-drm display-subsystem: devfreq is not set
- [ 0.212668] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xb0a59b4c)
- [ 0.212741] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] find panel: 2
- [ 0.212778] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] *ERROR* Failed to find panel or bridge: -517
- [ 0.212813] rockchip-drm display-subsystem: failed to bind ffb30000.dsi (ops 0xb0a60284): -517
- [ 0.213073] rockchip-drm display-subsystem: master bind failed: -517
- [ 0.218110] probe esd_check
- [ 0.226365] loop: module loaded
- [ 0.227069] zram: Added device: zram0
- [ 0.229098] mdio_bus fixed-0: GPIO lookup for consumer reset
- [ 0.229109] mdio_bus fixed-0: using lookup tables for GPIO lookup
- [ 0.229119] mdio_bus fixed-0: No GPIO consumer reset found
- [ 0.229157] libphy: Fixed MDIO Bus: probed
- [ 0.230570] usbcore: registered new interface driver catc
- [ 0.230654] usbcore: registered new interface driver kaweth
- [ 0.230680] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
- [ 0.230752] usbcore: registered new interface driver pegasus
- [ 0.230824] usbcore: registered new interface driver rtl8150
- [ 0.230912] usbcore: registered new interface driver r8152
- [ 0.230936] hso: drivers/net/usb/hso.c: Option Wireless
- [ 0.231050] usbcore: registered new interface driver hso
- [ 0.231125] usbcore: registered new interface driver lan78xx
- [ 0.231210] usbcore: registered new interface driver asix
- [ 0.231317] usbcore: registered new interface driver ax88179_178a
- [ 0.231391] usbcore: registered new interface driver cdc_ether
- [ 0.231462] usbcore: registered new interface driver cdc_eem
- [ 0.231534] usbcore: registered new interface driver dm9601
- [ 0.231613] usbcore: registered new interface driver sr9700
- [ 0.231701] usbcore: registered new interface driver CoreChips
- [ 0.231791] usbcore: registered new interface driver smsc75xx
- [ 0.231880] usbcore: registered new interface driver smsc95xx
- [ 0.231952] usbcore: registered new interface driver gl620a
- [ 0.232032] usbcore: registered new interface driver net1080
- [ 0.232110] usbcore: registered new interface driver plusb
- [ 0.232185] usbcore: registered new interface driver rndis_host
- [ 0.232296] usbcore: registered new interface driver cdc_subset
- [ 0.232367] usbcore: registered new interface driver zaurus
- [ 0.232443] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
- [ 0.232528] usbcore: registered new interface driver int51x1
- [ 0.232607] usbcore: registered new interface driver kalmia
- [ 0.232682] usbcore: registered new interface driver ipheth
- [ 0.232766] usbcore: registered new interface driver sierra_net
- [ 0.232839] usbcore: registered new interface driver cx82310_eth
- [ 0.232931] usbcore: registered new interface driver cdc_ncm
- [ 0.233006] usbcore: registered new interface driver huawei_cdc_ncm
- [ 0.233078] usbcore: registered new interface driver lg-vl600
- [ 0.233160] usbcore: registered new interface driver qmi_wwan
- [ 0.233271] usbcore: registered new interface driver cdc_mbim
- [ 0.233342] usbcore: registered new interface driver ch9200
- [ 0.235040] dwc3 ffd00000.dwc3: Failed to get clk 'ref': -2
- [ 0.240503] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.240528] ehci-platform: EHCI generic platform driver
- [ 0.241170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.241221] ohci-platform: OHCI generic platform driver
- [ 0.241891] usbcore: registered new interface driver cdc_acm
- [ 0.241919] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.241996] usbcore: registered new interface driver cdc_wdm
- [ 0.242091] usbcore: registered new interface driver usb-storage
- [ 0.242534] [tlsc] tlsc6x_init: ++
- [ 0.242857] i2c /dev entries driver
- [ 0.244886] rk808 0-0020: chip id: 0x8090
- [ 0.245003] rk808 0-0020: No cache defaults, reading back from HW
- [ 0.251436] rk808 0-0020: source: on=0x40, off=0x00
- [ 0.251479] rk808 0-0020: support dcdc3 fb mode:-22, -1329908800
- [ 0.251632] rk808 0-0020: support pmic reset mode:0,0
- [ 0.251968] gpiochip_find_base: found new base at 511
- [ 0.252280] gpio gpiochip5: (rk817-gpio): added GPIO chardev (254:5)
- [ 0.252410] gpiochip_setup_dev: registered GPIOs 511 to 511 on device: gpiochip5 (rk817-gpio)
- [ 0.252522] gpio gpiochip5: (rk817-gpio): created GPIO range 0->0 ==> rk805-pinctrl PIN 0->0
- [ 0.255824] rk808 0-0020: GPIO lookup for consumer dvs
- [ 0.255837] rk808 0-0020: using device tree for GPIO lookup
- [ 0.255867] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3f0000/pmic@20[0]'
- [ 0.255890] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3f0000/pmic@20[0]'
- [ 0.255902] rk808 0-0020: using lookup tables for GPIO lookup
- [ 0.255912] rk808 0-0020: No GPIO consumer dvs found
- [ 0.255923] rk808-regulator rk808-regulator: there is no dvs0 gpio
- [ 0.255962] rk808 0-0020: GPIO lookup for consumer dvs
- [ 0.255970] rk808 0-0020: using device tree for GPIO lookup
- [ 0.255993] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3f0000/pmic@20[1]'
- [ 0.256015] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3f0000/pmic@20[1]'
- [ 0.256025] rk808 0-0020: using lookup tables for GPIO lookup
- [ 0.256035] rk808 0-0020: No GPIO consumer dvs found
- [ 0.256044] rk808-regulator rk808-regulator: there is no dvs1 gpio
- [ 0.256148] DCDC_REG1: supplied by vcc5v0_sys
- [ 0.256740] DCDC_REG2: supplied by vcc5v0_sys
- [ 0.257270] DCDC_REG3: supplied by vcc5v0_sys
- [ 0.257792] DCDC_REG4: supplied by vcc5v0_sys
- [ 0.258339] DCDC_REG5: supplied by vcc5v0_sys
- [ 0.258817] LDO_REG1: supplied by vcc_buck5
- [ 0.259343] LDO_REG2: supplied by vcc_buck5
- [ 0.259824] LDO_REG3: supplied by vcc_buck5
- [ 0.260362] LDO_REG4: supplied by vcc_buck5
- [ 0.260873] LDO_REG5: supplied by vcc_buck5
- [ 0.262064] LDO_REG6: supplied by vcc_buck5
- [ 0.263283] LDO_REG7: supplied by vcc5v0_sys
- [ 0.264476] LDO_REG8: supplied by vcc5v0_sys
- [ 0.265005] LDO_REG9: supplied by vcc5v0_sys
- [ 0.265542] SWITCH_REG1: supplied by vcc5v0_sys
- [ 0.265994] SWITCH_REG2: supplied by vcc3v3_sys
- [ 0.268379] input: rk805 pwrkey as /devices/platform/ff3f0000.i2c/i2c-0/0-0020/rk805-pwrkey/input/input0
- [ 0.271448] rk808-rtc rk808-rtc: registered as rtc0
- [ 0.272058] rk808-rtc rk808-rtc: setting system clock to 2024-04-03 19:09:33 UTC (1712171373)
- [ 0.274613] [tlsc]tlsc6x_probe: Enter
- [ 0.274654] [tlsc]tlsc6x_parse_dt: Enter
- [ 0.274706] of_get_named_gpiod_flags: parsed 'tlsc6x,reset-gpio' property of node '/i2c@ff540000/tlsc6x_ts@2e[0]' - status (0)
- [ 0.274738] of_get_named_gpiod_flags: parsed 'tlsc6x,irq-gpio' property of node '/i2c@ff540000/tlsc6x_ts@2e[0]' - status (0)
- [ 0.274745] tpd-firmware-update:0
- [ 0.274771] tlsc6x_ts 5-002e: tpd-firmware-update undefined!
- [ 0.274796] tlsc6x_ts 5-002e: have-virtualkey undefined!
- [ 0.274819] [tlsc]tlsc6x_hw_init: Enter
- [ 0.274878] [tlsc]tlsc6x_tpd_reset: Enter
- [ 0.274901] [tlsc]tlsc6x_tpd_reset_force: Enter
- [ 0.359291] [tlsc]tlsc6x_tpd_reset: Enter
- [ 0.359321] [tlsc]tlsc6x_tpd_reset_force: Enter
- [ 0.444287] [tlsc]tlsc6x_tp_dect: Enter
- [ 0.499042] [tlsc] g_mccode is 0x1
- [ 0.499071] [tlsc]tlsx6x_3536get_running_cfg: Enter
- [ 0.499087] [tlsc]tlsx6x_comb_get_running_cfg: Enter
- [ 0.505306] [tlsc] tlsc_vendor_id = 7, tlsc_project_id = 1
- [ 0.505334] [tlsc] updating touch panel param to fw_file_tlsc6x_7_1
- [ 0.505340] [tlsc]tlsc6x_upgrade_romcfg_array: Enter
- [ 0.505364] [tlsc] g_tlsc6x_cfg_ver is 0x100e0e01
- [ 0.505388] [tlsc]tlsc6x_tpcfg_ver_comp: Enter
- [ 0.505413] [tlsc] vnow: 0x4,vbuild: 0x4
- [ 0.505417] [tlsc] Tlsc6x:auto update skip:no updated version!
- [ 0.505445] [tlsc] Tlsc6x:3536 boot not need update!
- [ 0.511417] [tlsc]tlsc6x_tpd_reset: Enter
- [ 0.511445] [tlsc]tlsc6x_tpd_reset_force: Enter
- [ 0.596591] input: tlsc6x_touch as /devices/virtual/input/input1
- [ 0.597153] input: proximity_tp as /devices/virtual/input/input2
- [ 0.597749] [tlsc] The irq node num is 101
- [ 0.597963] tlsc6x_ts 5-002e: Create proc entry success!
- [ 0.600773] rkcifhw ffae0000.rkcif: no iommu attached, using non-iommu buffers
- [ 0.600829] rkcifhw ffae0000.rkcif: assigned reserved memory node isp
- [ 0.600970] rkcif rkcif_dvp: rkcif driver version: v00.01.0a
- [ 0.601072] rkcif rkcif_dvp: attach to cif hw node
- [ 0.601094] rkcif rkcif_dvp: rkcif wait line 0
- [ 0.602291] OF: graph: no port node found in /rkcif_dvp
- [ 0.602317] rkcif_dvp: cif_subdev_notifier: no subdev be found!
- [ 0.602333] rkcif_dvp: Failed to register subdev notifier(-19)
- [ 0.603305] rkcif rkcif_dvp: detach to cif hw node
- [ 0.605372] rkisp_hw ffb50000.rkisp: is_thunderboot: 0
- [ 0.605411] rkisp_hw ffb50000.rkisp: Missing rockchip,grf property
- [ 0.605721] rkisp_hw ffb50000.rkisp: iommu is disabled, using non-iommu buffers
- [ 0.605771] rkisp_hw ffb50000.rkisp: assigned reserved memory node isp
- [ 0.606086] rkisp rkisp-vir0: rkisp driver version: v01.06.02
- [ 0.606193] rkisp rkisp-vir0: GPIO lookup for consumer vsirq
- [ 0.606202] rkisp rkisp-vir0: using device tree for GPIO lookup
- [ 0.606229] of_get_named_gpiod_flags: can't parse 'vsirq-gpios' property of node '/rkisp-vir0[0]'
- [ 0.606300] of_get_named_gpiod_flags: can't parse 'vsirq-gpio' property of node '/rkisp-vir0[0]'
- [ 0.606315] rkisp rkisp-vir0: using lookup tables for GPIO lookup
- [ 0.606325] rkisp rkisp-vir0: No GPIO consumer vsirq found
- [ 0.606384] rkisp rkisp-vir0: No memory-region-thunderboot specified
- [ 0.606630] rkisp rkisp-vir0: Entity type for entity rkisp-isp-subdev was not initialized!
- [ 0.606674] rkisp rkisp-vir0: Entity type for entity rkisp-csi-subdev was not initialized!
- [ 0.606708] rkisp rkisp-vir0: Entity type for entity rkisp-bridge-ispp was not initialized!
- [ 0.610586] iommu: Adding device ffb60000.rkispp to group 1
- [ 0.610646] rkispp_hw ffb60000.rkispp: Linked as a consumer to ffb60e00.iommu
- [ 0.611042] rkispp_hw ffb60000.rkispp: max input:0x0@0fps
- [ 0.611092] rkispp_hw ffb60000.rkispp: can't request region for resource [mem 0xffb60000-0xffb7ffff]
- [ 0.611368] rkispp_hw ffb60000.rkispp: failed to get cru reset
- [ 0.611642] rkispp rkispp-vir0: rkispp driver version: v01.06.02
- [ 0.614527] usbcore: registered new interface driver uvcvideo
- [ 0.614561] USB Video Class driver (1.1.1)
- [ 0.614940] vccio_sdio: supplied by vcc_1v8
- [ 0.615125] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.2
- [ 0.615177] rockchip-iodomain fe020000.syscon:io-domains: vccio1(1800000 uV) supplied by vccio_sdio
- [ 0.615344] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.16
- [ 0.615404] rockchip-iodomain fe020000.syscon:io-domains: vccio2(1800000 uV) supplied by vccio_sd
- [ 0.615522] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.12
- [ 0.615573] rockchip-iodomain fe020000.syscon:io-domains: vccio3(1800000 uV) supplied by vcc_1v8
- [ 0.615730] rockchip-iodomain fe020000.syscon:io-domains: vccio4(1800000 uV) supplied by vcc_1v8
- [ 0.615852] rockchip-iodomain fe020000.syscon:io-domains: Linked as a consumer to regulator.7
- [ 0.615903] rockchip-iodomain fe020000.syscon:io-domains: vccio5(3300000 uV) supplied by vcc3v3_sys
- [ 0.616067] rockchip-iodomain fe020000.syscon:io-domains: pmuio0(3300000 uV) supplied by vcc3v3_sys
- [ 0.616227] rockchip-iodomain fe020000.syscon:io-domains: pmuio1(3300000 uV) supplied by vcc3v3_sys
- [ 0.619000] rockchip-thermal ff5f0000.tsadc: tsadc trimmed value = 3
- [ 0.619396] rockchip-thermal ff5f0000.tsadc: tsadc is probed successfully!
- [ 0.619856] rockchip-thermal ff5f8000.tsadc: tsadc trimmed value = 2
- [ 0.620124] rockchip-thermal ff5f8000.tsadc: tsadc is probed successfully!
- [ 0.621075] dw_wdt ff680000.watchdog: No valid TOPs array specified
- [ 0.621783] Bluetooth: HCI UART driver ver 2.3
- [ 0.621815] Bluetooth: HCI UART protocol H4 registered
- [ 0.622125] cpu cpu0: bin=0
- [ 0.622183] cpu cpu0: leakage=2.875
- [ 0.622368] cpu cpu0: Linked as a consumer to regulator.5
- [ 0.634316] cpu cpu0: temp=51000, pvtm=102250 (102068 + 182)
- [ 0.634603] cpu cpu0: pvtm-volt-sel=1
- [ 0.634704] cpu cpu0: Dropping the link to regulator.5
- [ 0.634776] cpu cpu0: bin-scale=5
- [ 0.635142] cpu cpu0: Linked as a consumer to regulator.5
- [ 0.635292] cpu cpu0: Dropping the link to regulator.5
- [ 0.635542] cpu cpu0: Linked as a consumer to regulator.5
- [ 0.636853] cpu cpu0: avs=0
- [ 0.637290] energy_model: Created perf domain 0-3
- [ 0.637346] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
- [ 0.637395] cpu cpu0: failed to read out thermal zone (-22)
- [ 0.638139] cpu cpu0: failed to find power_model node
- [ 0.638471] cpuidle: enable-method property 'psci' found operations
- [ 0.638729] cpuidle: enable-method property 'psci' found operations
- [ 0.638799] cpuidle: enable-method property 'psci' found operations
- [ 0.638869] cpuidle: enable-method property 'psci' found operations
- [ 0.639208] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset
- [ 0.639213] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup
- [ 0.639262] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0)
- [ 0.639280] gpio gpiochip2: Persistence not supported for GPIO 5
- [ 0.639532] Synopsys Designware Multimedia Card Interface Driver
- [ 0.640024] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/work_led[0]' - status (0)
- [ 0.640041] gpio gpiochip2: Persistence not supported for GPIO 31
- [ 0.640044] no flags found for gpios
- [ 0.640073] dwmmc_rockchip ffc50000.dwmmc: IDMAC supports 32-bit address mode.
- [ 0.640110] dwmmc_rockchip ffc50000.dwmmc: Using internal DMA controller.
- [ 0.640126] dwmmc_rockchip ffc50000.dwmmc: Version ID is 270a
- [ 0.640159] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/sys_led[0]' - status (0)
- [ 0.640170] gpio gpiochip2: Persistence not supported for GPIO 28
- [ 0.640173] no flags found for gpios
- [ 0.640178] dwmmc_rockchip ffc50000.dwmmc: DW MMC controller at irq 58,32 bit host data width,256 deep fifo
- [ 0.640217] dwmmc_rockchip ffc60000.dwmmc: IDMAC supports 32-bit address mode.
- [ 0.640256] dwmmc_rockchip ffc50000.dwmmc: GPIO lookup for consumer wp
- [ 0.640261] dwmmc_rockchip ffc50000.dwmmc: using device tree for GPIO lookup
- [ 0.640269] dwmmc_rockchip ffc60000.dwmmc: Using internal DMA controller.
- [ 0.640273] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ffc50000[0]'
- [ 0.640282] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ffc50000[0]'
- [ 0.640286] dwmmc_rockchip ffc60000.dwmmc: Version ID is 270a
- [ 0.640288] dwmmc_rockchip ffc50000.dwmmc: using lookup tables for GPIO lookup
- [ 0.640292] dwmmc_rockchip ffc50000.dwmmc: No GPIO consumer wp found
- [ 0.640320] mmc_host mmc0: card is non-removable.
- [ 0.640332] dwmmc_rockchip ffc60000.dwmmc: DW MMC controller at irq 59,32 bit host data width,256 deep fifo
- [ 0.640344] dwmmc_rockchip ffc70000.dwmmc: IDMAC supports 32-bit address mode.
- [ 0.640364] dwmmc_rockchip ffc70000.dwmmc: Using internal DMA controller.
- [ 0.640377] dwmmc_rockchip ffc70000.dwmmc: Version ID is 270a
- [ 0.640415] dwmmc_rockchip ffc70000.dwmmc: DW MMC controller at irq 60,32 bit host data width,256 deep fifo
- [ 0.640434] dwmmc_rockchip ffc60000.dwmmc: Linked as a consumer to regulator.16
- [ 0.640454] dwmmc_rockchip ffc60000.dwmmc: GPIO lookup for consumer cd
- [ 0.640456] dwmmc_rockchip ffc70000.dwmmc: GPIO lookup for consumer wp
- [ 0.640459] dwmmc_rockchip ffc70000.dwmmc: using device tree for GPIO lookup
- [ 0.640461] dwmmc_rockchip ffc60000.dwmmc: using device tree for GPIO lookup
- [ 0.640471] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ffc70000[0]'
- [ 0.640475] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@ffc60000[0]'
- [ 0.640484] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ffc70000[0]'
- [ 0.640487] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@ffc60000[0]'
- [ 0.640492] dwmmc_rockchip ffc60000.dwmmc: using lookup tables for GPIO lookup
- [ 0.640493] dwmmc_rockchip ffc70000.dwmmc: using lookup tables for GPIO lookup
- [ 0.640497] dwmmc_rockchip ffc70000.dwmmc: No GPIO consumer wp found
- [ 0.640499] dwmmc_rockchip ffc60000.dwmmc: No GPIO consumer cd found
- [ 0.640504] dwmmc_rockchip ffc60000.dwmmc: GPIO lookup for consumer wp
- [ 0.640508] dwmmc_rockchip ffc60000.dwmmc: using device tree for GPIO lookup
- [ 0.640516] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ffc60000[0]'
- [ 0.640522] dwmmc_rockchip ffc70000.dwmmc: allocated mmc-pwrseq
- [ 0.640525] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ffc60000[0]'
- [ 0.640529] dwmmc_rockchip ffc60000.dwmmc: using lookup tables for GPIO lookup
- [ 0.640539] dwmmc_rockchip ffc60000.dwmmc: No GPIO consumer wp found
- [ 0.640541] mmc_host mmc1: card is non-removable.
- [ 0.640626] usbcore: registered new interface driver usbhid
- [ 0.640642] usbhid: USB HID core driver
- [ 0.641866] rockchip-saradc ff5e0000.saradc: Linked as a consumer to regulator.12
- [ 0.642434] optee: probing for conduit method from DT.
- [ 0.642474] optee: revision 3.13 (7b427573)
- [ 0.643058] unmapped a mapping 00000000 ca473b40
- [ 0.643113] optee: initialized driver
- [ 0.643126] rksfc_base v1.1 2016-01-08
- [ 0.643584] rksfc ffc90000.sfc: rksfc_probe clk rate = 79200000
- [ 0.643678] rkflash_dev_init enter
- [ 0.643696] sfc nor id: 0 0 0
- [ 0.643707] rkflash[1] is invalid
- [ 0.643709] rkflash_dev_init enter
- [ 0.643729] sfc_nand id: 0 0 0
- [ 0.643736] rkflash[2] is invalid
- [ 0.647550] rk817-codec rk817-codec: rk817_codec_parse_dt_property() Can not get child: codec
- [ 0.647583] rk817-codec rk817-codec: rk817_platform_probe() parse device tree property error -19
- [ 0.651738] NET: Registered protocol family 17
- [ 0.651803] NET: Registered protocol family 15
- [ 0.652044] Bluetooth: RFCOMM TTY layer initialized
- [ 0.652085] Bluetooth: RFCOMM socket layer initialized
- [ 0.652126] Bluetooth: RFCOMM ver 1.11
- [ 0.652150] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 0.652170] Bluetooth: HIDP socket layer initialized
- [ 0.652183] [BT_RFKILL]: Enter rfkill_rk_init
- [ 0.652196] [WLAN_RFKILL]: Enter rfkill_wlan_init
- [ 0.652487] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 0.652495] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 0.652705] [WLAN_RFKILL]: Enter rfkill_wlan_probe
- [ 0.652784] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6212a
- [ 0.652800] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
- [ 0.652814] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
- [ 0.652840] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
- [ 0.652853] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
- [ 0.652864] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
- [ 0.652887] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
- [ 0.652892] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 8, flags = 0.
- [ 0.652922] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
- [ 0.652940] [WLAN_RFKILL]: Exit rfkill_wlan_probe
- [ 0.653375] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 0.653387] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
- [ 0.653396] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 48.
- [ 0.653425] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
- [ 0.653445] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
- [ 0.653449] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 101.
- [ 0.653479] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
- [ 0.653483] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 102.
- [ 0.653511] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
- [ 0.653515] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 100.
- [ 0.653532] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
- [ 0.653599] [BT_RFKILL]: Request irq for bt wakeup host
- [ 0.653719] [BT_RFKILL]: ** disable irq
- [ 0.653883] [BT_RFKILL]: bt_default device registered.
- [ 0.653983] Key type dns_resolver registered
- [ 0.654182] flash vendor_init_thread!
- [ 0.654208] flash vendor storage:20170308 ret = -1
- [ 0.654975] ov2740 1-0036: driver version: 00.01.01
- [ 0.655089] ov2740 1-0036: GPIO lookup for consumer power
- [ 0.655094] ov2740 1-0036: using device tree for GPIO lookup
- [ 0.655127] of_get_named_gpiod_flags: parsed 'power-gpios' property of node '/i2c@ff510000/ov2740@36[0]' - status (0)
- [ 0.655136] gpio-102 (bt_default_wake): gpiod_request: status -16
- [ 0.655142] ov2740 1-0036: Failed to get power-gpios
- [ 0.655160] ov2740 1-0036: GPIO lookup for consumer reset
- [ 0.655165] ov2740 1-0036: using device tree for GPIO lookup
- [ 0.655187] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff510000/ov2740@36[0]' - status (0)
- [ 0.655205] gpio gpiochip1: Persistence not supported for GPIO 28
- [ 0.655221] ov2740 1-0036: GPIO lookup for consumer pwdn
- [ 0.655255] ov2740 1-0036: using device tree for GPIO lookup
- [ 0.655276] of_get_named_gpiod_flags: parsed 'pwdn-gpios' property of node '/i2c@ff510000/ov2740@36[0]' - status (0)
- [ 0.655282] gpio-60 (reset): gpiod_request: status -16
- [ 0.655287] ov2740 1-0036: Failed to get pwdn-gpios
- [ 0.655306] ov2740 1-0036: GPIO lookup for consumer vsync
- [ 0.655311] ov2740 1-0036: using device tree for GPIO lookup
- [ 0.655330] of_get_named_gpiod_flags: parsed 'vsync-gpios' property of node '/i2c@ff510000/ov2740@36[0]' - status (0)
- [ 0.655342] gpio gpiochip1: Persistence not supported for GPIO 29
- [ 0.655451] ov2740 1-0036: Linked as a consumer to regulator.15
- [ 0.655517] ov2740 1-0036: Linked as a consumer to regulator.13
- [ 0.655585] ov2740 1-0036: Linked as a consumer to regulator.14
- [ 0.656184] clk_mipicsi_out2io_fracdiv p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
- [ 0.693034] ov2740 1-0036: Found cameraID 0x002740
- [ 0.693233] rockchip-mipi-dphy-rx ff4b0000.csi-dphy: match m00_f_ov2740 1-0036:bus type 4
- [ 0.694665] Registering SWP/SWPB emulation handler
- [ 0.700311] registered taskstats version 1
- [ 0.700369] Loading compiled-in X.509 certificates
- [ 0.703187] rga2: Driver loaded successfully ver:3.2.56726
- [ 0.703555] rga2: Module initialized.
- [ 0.708179] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 0.710350] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 0.712481] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 0.713275] dwmmc_rockchip ffc50000.dwmmc: flagging retune needed because mmc_request_done CRC error
- [ 0.714004] mmc_host mmc0: Bus speed (slot 0) = 198000000Hz (slot req 200000000Hz, actual 198000000HZ div = 0)
- [ 0.714038] dwmmc_rockchip ffc50000.dwmmc: start dw_mci_rk3288_execute_tuning
- [ 0.714054] dwmmc_rockchip ffc50000.dwmmc: v2 Successfully tuned phase to 90
- [ 0.714067] dwmmc_rockchip ffc50000.dwmmc: v2 tuned success
- [ 0.714336] mmc0: new HS200 MMC card at address 0001
- [ 0.715441] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 0.715620] mmcblk0: mmc0:0001 004GA0 3.69 GiB
- [ 0.716478] mmcblk0boot0: mmc0:0001 004GA0 partition 1 2.00 MiB
- [ 0.717374] mmcblk0boot1: mmc0:0001 004GA0 partition 2 2.00 MiB
- [ 0.718301] mmc_host mmc2: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
- [ 0.718323] mmcblk0rpmb: mmc0:0001 004GA0 partition 3 512 KiB, chardev (241:0)
- [ 0.718337] dwmmc_rockchip ffc60000.dwmmc: start dw_mci_rk3288_execute_tuning
- [ 0.718344] dwmmc_rockchip ffc60000.dwmmc: start v1 tune, priv->num_phases = 360
- [ 0.720231] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
- [ 0.727907] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
- [ 0.735387] dwmmc_rockchip ffc60000.dwmmc: Successfully tuned phase to 135
- [ 0.735432] mmc2: new ultra high speed SDR104 SDXC card at address 59b4
- [ 0.736609] mmcblk2: mmc2:59b4 JC1S5 59.7 GiB
- [ 0.738592] mmcblk2: p1
- [ 0.742371] rockchip-usb2phy-naneng ff4c8000.usb2-phy: GPIO lookup for consumer vup
- [ 0.742380] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using device tree for GPIO lookup
- [ 0.742400] of_get_named_gpiod_flags: can't parse 'vup-gpios' property of node '/usb2-phy@ff4c8000[0]'
- [ 0.742410] of_get_named_gpiod_flags: can't parse 'vup-gpio' property of node '/usb2-phy@ff4c8000[0]'
- [ 0.742416] rockchip-usb2phy-naneng ff4c8000.usb2-phy: using lookup tables for GPIO lookup
- [ 0.742422] rockchip-usb2phy-naneng ff4c8000.usb2-phy: No GPIO consumer vup found
- [ 0.742571] phy phy-ff4c8000.usb2-phy.2: Linked as a consumer to regulator.18
- [ 0.743948] mpp_rkvenc ffbb0000.rkvenc: probing start
- [ 0.744725] mpp_rkvenc ffbb0000.rkvenc: Linked as a consumer to regulator.4
- [ 0.744793] mpp_rkvenc ffbb0000.rkvenc: bin=0
- [ 0.744822] mpp_rkvenc ffbb0000.rkvenc: leakage=2.250
- [ 0.744923] mpp_rkvenc ffbb0000.rkvenc: Failed to get pvtm
- [ 0.744977] mpp_rkvenc ffbb0000.rkvenc: bin-scale=37
- [ 0.745421] mpp_rkvenc ffbb0000.rkvenc: avs=0
- [ 0.745730] mpp_rkvenc ffbb0000.rkvenc: failed to find power_model node
- [ 0.745775] mpp_rkvenc ffbb0000.rkvenc: failed to initialize power model
- [ 0.745932] mpp_rkvenc ffbb0000.rkvenc: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
- [ 0.745956] mpp_rkvenc ffbb0000.rkvenc: failed to read out thermal zone (-22)
- [ 0.746290] mpp_rkvenc ffbb0000.rkvenc: probing finish
- [ 0.748318] rockchip-drm display-subsystem: devfreq is not set
- [ 0.748700] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xb0a59b4c)
- [ 0.748770] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] find panel: 2
- [ 0.748808] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] *ERROR* Failed to find panel or bridge: -517
- [ 0.748831] rockchip-drm display-subsystem: failed to bind ffb30000.dsi (ops 0xb0a60284): -517
- [ 0.749028] rockchip-drm display-subsystem: master bind failed: -517
- [ 0.749470] probe esd_check
- [ 0.749557] panel-simple-dsi ffb30000.dsi.0: Linked as a consumer to regulator.12
- [ 0.749601] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply vsp not found, using dummy regulator
- [ 0.749640] panel-simple-dsi ffb30000.dsi.0: Linked as a consumer to regulator.0
- [ 0.749663] panel-simple-dsi ffb30000.dsi.0: ffb30000.dsi.0 supply vsn not found, using dummy regulator
- [ 0.749734] panel-simple-dsi ffb30000.dsi.0: GPIO lookup for consumer enable
- [ 0.749743] panel-simple-dsi ffb30000.dsi.0: using device tree for GPIO lookup
- [ 0.749772] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/dsi@ffb30000/panel@2[0]'
- [ 0.749783] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/dsi@ffb30000/panel@2[0]'
- [ 0.749792] panel-simple-dsi ffb30000.dsi.0: using lookup tables for GPIO lookup
- [ 0.749798] panel-simple-dsi ffb30000.dsi.0: No GPIO consumer enable found
- [ 0.749804] panel-simple-dsi ffb30000.dsi.0: GPIO lookup for consumer reset
- [ 0.749808] panel-simple-dsi ffb30000.dsi.0: using device tree for GPIO lookup
- [ 0.749835] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/dsi@ffb30000/panel@2[0]' - status (0)
- [ 0.749859] gpio gpiochip2: Persistence not supported for GPIO 2
- [ 0.749863] no flags found for reset
- [ 0.750005] esd_check find match panel: panel@2, esd_power_value: 128, esd_power_cmd: 9
- [ 0.750007] enable esd check
- [ 0.753297] ehci-platform ffe00000.usb: EHCI Host Controller
- [ 0.753364] ehci-platform ffe00000.usb: new USB bus registered, assigned bus number 1
- [ 0.753483] ehci-platform ffe00000.usb: irq 63, io mem 0xffe00000
- [ 0.760332] ehci-platform ffe00000.usb: USB 2.0 started, EHCI 1.00
- [ 0.760615] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
- [ 0.760638] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.760647] usb usb1: Product: EHCI Host Controller
- [ 0.760656] usb usb1: Manufacturer: Linux 4.19.111 ehci_hcd
- [ 0.760667] usb usb1: SerialNumber: ffe00000.usb
- [ 0.761629] hub 1-0:1.0: USB hub found
- [ 0.761721] hub 1-0:1.0: 1 port detected
- [ 0.762795] ohci-platform ffe10000.usb: Generic Platform OHCI controller
- [ 0.762852] ohci-platform ffe10000.usb: new USB bus registered, assigned bus number 2
- [ 0.763019] ohci-platform ffe10000.usb: irq 64, io mem 0xffe10000
- [ 0.818815] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
- [ 0.818887] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.818909] usb usb2: Product: Generic Platform OHCI controller
- [ 0.818928] usb usb2: Manufacturer: Linux 4.19.111 ohci_hcd
- [ 0.818947] usb usb2: SerialNumber: ffe10000.usb
- [ 0.820797] hub 2-0:1.0: USB hub found
- [ 0.820957] hub 2-0:1.0: 1 port detected
- [ 0.825721] rockchip-drm display-subsystem: devfreq is not set
- [ 0.826097] rockchip-drm display-subsystem: bound ffb00000.vop (ops 0xb0a59b4c)
- [ 0.826172] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] find panel: 2
- [ 0.826296] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_bind] set panel_using to panel@2
- [ 0.826353] rockchip-drm display-subsystem: bound ffb30000.dsi (ops 0xb0a60284)
- [ 0.826381] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 0.826390] [drm] No driver support for vblank timestamp query.
- [ 0.826603] rockchip-drm display-subsystem: failed to parse loader memory
- [ 0.831381] dclk_vop_fracdiv p_rate(1188000000) is low than rate(71000000)*20, use integer or half-div
- [ 0.831511] rockchip-vop ffb00000.vop: [drm:vop_crtc_atomic_enable] Update mode to 720x1280p59, type: 16
- [ 0.831611] dclk_vop_fracdiv p_rate(1188000000) is low than rate(69883000)*20, use integer or half-div
- [ 0.831656] dw-mipi-dsi ffb30000.dsi: [drm:dw_mipi_dsi_encoder_enable] final DSI-Link bandwidth: 480 x 4 Mbps
- [ 0.855465] vendor storage:20190527 ret = 0
- [ 0.874957] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- [ 0.904172] mmc1: new high speed SDIO card at address 0001
- [ 1.082572] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 1.236588] esd cmd = 0x9c
- [ 1.236596] enable esd check
- [ 1.250405] usb 1-1: New USB device found, idVendor=ab20, idProduct=1276, bcdDevice=10.03
- [ 1.250420] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 1.250430] usb 1-1: Product: U0AS01A-0
- [ 1.250438] usb 1-1: Manufacturer: U0AS01A-0
- [ 1.250447] usb 1-1: SerialNumber: 2022061xxxxxxxx44
- [ 1.265793] uvcvideo: Found UVC 1.00 device U0AS01A-0 (ab20:1276)
- [ 1.269225] uvcvideo: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
- [ 1.309231] Console: switching to colour frame buffer device 160x45
- [ 1.320606] uvcvideo 1-1:1.0: Entity type for entity Extension 4 was not initialized!
- [ 1.320622] uvcvideo 1-1:1.0: Entity type for entity Extension 3 was not initialized!
- [ 1.320639] uvcvideo 1-1:1.0: Entity type for entity Processing 2 was not initialized!
- [ 1.320652] uvcvideo 1-1:1.0: Entity type for entity Camera 1 was not initialized!
- [ 1.321652] input: U0AS01A-0: U0AS01A-0 as /devices/platform/ffe00000.usb/usb1/1-1/1-1:1.0/input/input3
- [ 1.342781] rockchip-drm display-subsystem: fb0: frame buffer device
- [ 1.343919] [drm] Initialized rockchip 2.0.0 20140818 for display-subsystem on minor 0
- [ 1.345699] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/e_stop[0]' - status (0)
- [ 1.345724] gpio gpiochip2: Persistence not supported for GPIO 21
- [ 1.345861] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/wakeup[0]' - status (0)
- [ 1.345872] gpio gpiochip0: Persistence not supported for GPIO 7
- [ 1.345956] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/open_door[0]' - status (0)
- [ 1.345966] gpio gpiochip0: Persistence not supported for GPIO 6
- [ 1.346172] input: gpio-keys as /devices/platform/gpio-keys/input/input4
- [ 1.346879] [FTS_TS]fts_ts_i2c_init: Enter
- [ 1.346950] [FTS_TS]fts_ts_i2c_init: Exit(289)
- [ 1.347422] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 1.350595] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47xxxxxxxxxx7'
- [ 1.351009] rkisp rkisp-vir0: clear unready subdev num: 1
- [ 1.351225] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 1.351257] cfg80211: failed to load regulatory.db
- [ 1.351908] rkisp0: Async subdev notifier completed
- [ 1.352007] ALSA device list:
- [ 1.352020] #7: Loopback 1
- [ 1.353090] Freeing unused kernel memory: 1024K
- [ 1.353366] Run /init as init process
- [ 1.534132] FAT-fs (mmcblk2p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 1.947803] EXT4-fs (loop3): recovery complete
- [ 1.951129] EXT4-fs (loop3): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.966790] galcore: loading out-of-tree module taints kernel.
- [ 2.973486] galcore: npu init.
- [ 2.974400] galcore: start npu probe.
- [ 2.974619] galcore ffbc0000.npu: Linked as a consumer to regulator.4
- [ 2.975393] npu: platform_get_irq irq = 62
- [ 2.975418] npu: platform_get_resource registerMemBase = ffbc0000, registerMemSize = 4000
- [ 2.975429] Galcore version 6.4.6.5.351518
- [ 2.975439] Galcore options:
- [ 2.975448] irqLine = 62
- [ 2.975455] registerMemBase = 0xFFBC0000
- [ 2.975461] registerMemSize = 0x00004000
- [ 2.975468] contiguousSize = 0x00400000
- [ 2.975474] contiguousBase = 0x0
- [ 2.975479] externalSize = 0x00000000
- [ 2.975484] externalBase = 0x0
- [ 2.975490] exclusiveSize = 0x00000000
- [ 2.975496] exclusiveBase = 0x0
- [ 2.975500] bankSize = 0x00000000
- [ 2.975506] fastClear = -1
- [ 2.975512] compression = 15
- [ 2.975518] powerManagement = 1
- [ 2.975533] baseAddress = 0x00000000
- [ 2.975540] physSize = 0x00000000
- [ 2.975548] recovery = 1
- [ 2.975559] stuckDump = 0
- [ 2.975578] GPU smallBatch = 1
- [ 2.975593] allMapInOne = 1
- [ 2.975616] enableNN = 0xff
- [ 2.975624] userClusterMasks =
- [ 2.975626] ff,
- [ 2.975635] ff,
- [ 2.975644] ff,
- [ 2.975651] ff,
- [ 2.975661] ff,
- [ 2.975669] ff,
- [ 2.975678] ff,
- [ 2.975691] ff,
- [ 2.975697]
- [ 2.975708] irqs =
- [ 2.975710] 62,
- [ 2.975719] -1,
- [ 2.975727] -1,
- [ 2.975731] -1,
- [ 2.975741] -1,
- [ 2.975748] -1,
- [ 2.975759] -1,
- [ 2.975770] -1,
- [ 2.975791] -1,
- [ 2.975796] -1,
- [ 2.975801] -1,
- [ 2.975807]
- [ 2.975818] registerBases =
- [ 2.975821] 0xFFBC0000,
- [ 2.975832] 0x00000000,
- [ 2.975840] 0x00000000,
- [ 2.975850] 0x00000000,
- [ 2.975856] 0x00000000,
- [ 2.975864] 0x00000000,
- [ 2.975874] 0x00000000,
- [ 2.975880] 0x00000000,
- [ 2.975889] 0x00000000,
- [ 2.975897] 0x00000000,
- [ 2.975906] 0x00000000,
- [ 2.975912]
- [ 2.975923] registerSizes =
- [ 2.975924] 0x00004000,
- [ 2.975932] 0x00000000,
- [ 2.975941] 0x00000000,
- [ 2.975948] 0x00000000,
- [ 2.975976] 0x00000000,
- [ 2.975989] 0x00000000,
- [ 2.975997] 0x00000000,
- [ 2.976005] 0x00000000,
- [ 2.976012] 0x00000000,
- [ 2.976025] 0x00000000,
- [ 2.976034] 0x00000000,
- [ 2.976040]
- [ 2.976050] chipIDs =
- [ 2.976052] 0xFFFFFFFF,
- [ 2.976058] 0xFFFFFFFF,
- [ 2.976068] 0xFFFFFFFF,
- [ 2.976082] 0xFFFFFFFF,
- [ 2.976088] 0xFFFFFFFF,
- [ 2.976097] 0xFFFFFFFF,
- [ 2.976106] 0xFFFFFFFF,
- [ 2.976115] 0xFFFFFFFF,
- [ 2.976130] 0xFFFFFFFF,
- [ 2.976138] 0xFFFFFFFF,
- [ 2.976147] 0xFFFFFFFF,
- [ 2.976156]
- [ 2.976170] core 0 internal sRAMBases =
- [ 2.976172] 0xFFFFFFFFFFFFFFFF,
- [ 2.976180] 0xFFFFFFFFFFFFFFFF,
- [ 2.976188]
- [ 2.976200] core 1 internal sRAMBases =
- [ 2.976202] 0xFFFFFFFFFFFFFFFF,
- [ 2.976210] 0xFFFFFFFFFFFFFFFF,
- [ 2.976217]
- [ 2.976268] core 2 internal sRAMBases =
- [ 2.976272] 0xFFFFFFFFFFFFFFFF,
- [ 2.976285] 0xFFFFFFFFFFFFFFFF,
- [ 2.976292]
- [ 2.976306] core 3 internal sRAMBases =
- [ 2.976308] 0xFFFFFFFFFFFFFFFF,
- [ 2.976324] 0xFFFFFFFFFFFFFFFF,
- [ 2.976334]
- [ 2.976353] core 4 internal sRAMBases =
- [ 2.976355] 0xFFFFFFFFFFFFFFFF,
- [ 2.976366] 0xFFFFFFFFFFFFFFFF,
- [ 2.976374]
- [ 2.976389] core 5 internal sRAMBases =
- [ 2.976391] 0xFFFFFFFFFFFFFFFF,
- [ 2.976404] 0xFFFFFFFFFFFFFFFF,
- [ 2.976418]
- [ 2.976436] core 6 internal sRAMBases =
- [ 2.976438] 0xFFFFFFFFFFFFFFFF,
- [ 2.976453] 0xFFFFFFFFFFFFFFFF,
- [ 2.976459]
- [ 2.976471] core 7 internal sRAMBases =
- [ 2.976473] 0xFFFFFFFFFFFFFFFF,
- [ 2.976490] 0xFFFFFFFFFFFFFFFF,
- [ 2.976504]
- [ 2.976521] core 8 internal sRAMBases =
- [ 2.976524] 0xFFFFFFFFFFFFFFFF,
- [ 2.976535] 0xFFFFFFFFFFFFFFFF,
- [ 2.976548]
- [ 2.976566] core 9 internal sRAMBases =
- [ 2.976569] 0xFFFFFFFFFFFFFFFF,
- [ 2.976580] 0xFFFFFFFFFFFFFFFF,
- [ 2.976590]
- [ 2.976602] core 10 internal sRAMBases =
- [ 2.976603] 0xFFFFFFFFFFFFFFFF,
- [ 2.976612] 0xFFFFFFFFFFFFFFFF,
- [ 2.976621]
- [ 2.976631] External sRAMBases =
- [ 2.976635] 0xffffffffffffffff,
- [ 2.976642] 0xffffffffffffffff,
- [ 2.976651]
- [ 2.976664] mmuPageTablePool = 1
- [ 2.976673] mmuDynamicMap = 1
- [ 2.976681] DDR Bit Width = 29
- [ 2.976689] isrPoll = 0x00000000
- [ 2.976697] Build options:
- [ 2.976706] gcdGPU_TIMEOUT = 20000
- [ 2.976716] gcdGPU_2D_TIMEOUT = 4000
- [ 2.976725] gcdINTERRUPT_STATISTIC = 1
- [ 2.979067] Galcore Info: ContiguousBase=0x1e056000 ContiguousSize=0x400000
- [ 2.983908] Galcore Info: MMU mapped core 0 SRAM[0] hardware virtual address=0x400000 size=0x40000
- [ 2.983940] Galcore Info: MMU mapped core 0 SRAM[1] hardware virtual address=0x440000 size=0x40000
- [ 2.985031] galcore ffbc0000.npu: Init npu devfreq
- [ 2.985088] galcore ffbc0000.npu: bin=0
- [ 2.985139] galcore ffbc0000.npu: leakage=1.875
- [ 2.998101] galcore ffbc0000.npu: temp=52000, pvtm=100815 (100815 + 0)
- [ 2.999431] galcore ffbc0000.npu: pvtm-volt-sel=1
- [ 2.999538] galcore ffbc0000.npu: bin-scale=23
- [ 3.000992] galcore ffbc0000.npu: avs=0
- [ 3.002745] galcore ffbc0000.npu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
- [ 3.002818] galcore ffbc0000.npu: failed to read out thermal zone (-22)
- [ 3.002968] galcore ffbc0000.npu: failed to find power_model node
- [ 3.002995] galcore ffbc0000.npu: failed to initialize power model
- [ 3.483315] udevd[280]: starting version 3.2.7
- [ 3.566958] udevd[280]: specified group 'kvm' unknown
- [ 3.641108] udevd[287]: starting eudev-3.2.7
- [ 3.714212] udevd[287]: specified group 'kvm' unknown
- [ 3.926232] clk_mipicsi_out2io_fracdiv p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
- [ 3.995794] clk_mipicsi_out2io_fracdiv p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
- [ 4.055547] clk_mipicsi_out2io_fracdiv p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
- [ 4.417772] zram0: detected capacity change from 0 to 201326592
- [ 4.424926] Adding 196604k swap on /dev/zram0. Priority:-2 extents:1 across:196604k SS
- [ 5.071778] EXT4-fs (mmcblk0p12): mounting ext2 file system using the ext4 subsystem
- [ 5.073967] EXT4-fs (mmcblk0p12): mounted filesystem without journal. Opts: (null)
- [ 5.216718] EXT4-fs (mmcblk0p9): mounting ext2 file system using the ext4 subsystem
- [ 5.219543] EXT4-fs (mmcblk0p9): mounted filesystem without journal. Opts: (null)
- [ 9.305447] EXT4-fs (mmcblk0p13): mounting ext2 file system using the ext4 subsystem
- [ 9.312529] EXT4-fs (mmcblk0p13): mounted filesystem without journal. Opts: (null)
- [ 9.899538] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1)
- [ 9.899578] ======== dhd_wlan_init_plat_data ========
- [ 9.899588] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
- [ 9.899661] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=109, oob_irq_flags=0x414
- [ 9.899677] dhd_wlan_init_gpio: WL_REG_ON=-1
- [ 9.899685] dhd_wifi_platform_load: Enter
- [ 9.899696] Power-up adapter 'DHD generic adapter'
- [ 9.900871] wifi_platform_set_power = 1
- [ 9.901001] ======== PULL WL_REG_ON(-1) HIGH! ========
- [ 9.901023] [WLAN_RFKILL]: rockchip_wifi_power: 1
- [ 9.901042] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
- [ 10.208345] wifi_platform_bus_enumerate device present 1
- [ 10.208385] ======== Card detection to detect SDIO card! ========
- [ 10.208394] mmc1:mmc host rescan start!
- [ 10.224445] bcmsdh_register: register client driver
- [ 10.224648] bcmsdh_sdmmc_probe: Enter num=1
- [ 10.224899] bcmsdh_sdmmc_probe: Enter num=2
- [ 10.224917] bus num (host idx)=1, slot num (rca)=1
- [ 10.224926] found adapter info 'DHD generic adapter'
- [ 10.224992] sdioh_attach: set sd_f2_blocksize 256
- [ 10.225039] sdioh_attach: sd clock rate = 0
- [ 10.225297] dhdsdio_probe : no mutex held. set lock
- [ 10.225415] F1 signature read @0x18000000=0x1541a9a6
- [ 10.227885] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x4
- [ 10.228678] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
- [ 10.228805] [dhd] dhd_conf_set_chiprev : chip=0xa9a6, chiprev=1
- [ 10.228966] [dhd] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
- [ 10.229364] [dhd] CFG80211-ERROR) wl_setup_wiphy : SAE support
- [ 10.229602] [dhd] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
- [ 10.230625] dhd_attach(): thread:dhd_watchdog_thread:31a started
- [ 10.230719] dhd_attach(): thread:dhd_dpc:31b started
- [ 10.230786] dhd_attach(): thread:dhd_rxf:31c started
- [ 10.230803] dhd_deferred_work_init: work queue initialized
- [ 10.230814] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
- [ 10.230850] dhd_bus_set_default_min_res_mask: Unhandled chip id
- [ 10.231042] sdioh_cis_read: func_cis_ptr[0]=0x1070
- [ 10.243269] Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1)
- [ 10.243723] Register interface [wlan0] MAC: 08:e9:f6:xx:xx:xx
- [ 10.243723]
- [ 10.243796] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0
- [ 10.243816] dhd_wl_ioctl: returning as busstate=0
- [ 10.243827] dhd_dbg_detach_pkt_monitor, 2204
- [ 10.243835] dhd_bus_devreset: == Power OFF ==
- [ 10.244068] bcmsdh_oob_intr_unregister: Enter
- [ 10.244078] bcmsdh_oob_intr_unregister: irq is not registered
- [ 10.244092] dhd_txglom_enable: enable 0
- [ 10.244100] dhd_bus_devreset: WLAN OFF DONE
- [ 10.244147] wifi_platform_set_power = 0
- [ 10.244158] ======== PULL WL_REG_ON(-1) LOW! ========
- [ 10.244166] [WLAN_RFKILL]: rockchip_wifi_power: 0
- [ 10.244181] [WLAN_RFKILL]: wifi shut off power [GPIO-1-1]
- [ 10.244190] dhdsdio_probe : the lock is released.
- [ 10.244584] dhd_module_init: Exit err=0
- [ 10.532927] /
- [ 10.795642] file system registered
- [ 10.807473] using random self ethernet address
- [ 10.807514] using random host ethernet address
- [ 10.892679] read descriptors
- [ 10.892731] read strings
- [ 11.867420] usb0: HOST MAC 7a:17:cc:xx:xx:xx
- [ 11.867503] usb0: MAC d6:40:1c:xx:xx:xx
- [ 12.288889] dhd_ioctl_entry: Interface is down
- [ 12.288957] dhd_ioctl_entry: Interface is down
- [ 12.288991] dhd_ioctl_entry: Interface is down
- [ 12.289019] dhd_ioctl_entry: Interface is down
- [ 12.289042] [dhd] WEXT-ERROR) wl_iw_get_essid : Error getting the SSID -22
- [ 12.289067] dhd_ioctl_entry: Interface is down
- [ 12.289104] dhd_ioctl_entry: Interface is down
- [ 12.289135] dhd_ioctl_entry: Interface is down
- [ 12.289155] dhd_ioctl_entry: Interface is down
- [ 12.289173] dhd_ioctl_entry: Interface is down
- [ 12.289767] dhd_ioctl_entry: Interface is down
- [ 12.289807] dhd_ioctl_entry: Interface is down
- [ 12.296501] dhd_ioctl_entry: Interface is down
- [ 13.423701] dw-apb-uart ff410000.serial: got rx and tx dma channels
- [ 13.424137] ttyS1 set divisor fail, quot:156 != dll,dlh:0
- [ 13.428725] ttyS1 set divisor fail, quot:1 != dll,dlh:0
- [ 13.452829] kpanic: magic is zero
- [ 14.402575] dhd_ioctl_entry: Interface is down
- [ 14.402634] dhd_ioctl_entry: Interface is down
- [ 14.402651] dhd_ioctl_entry: Interface is down
- [ 14.402671] dhd_ioctl_entry: Interface is down
- [ 14.402684] [dhd] WEXT-ERROR) wl_iw_get_essid : Error getting the SSID -22
- [ 14.402705] dhd_ioctl_entry: Interface is down
- [ 14.402738] dhd_ioctl_entry: Interface is down
- [ 14.402763] dhd_ioctl_entry: Interface is down
- [ 14.402789] dhd_ioctl_entry: Interface is down
- [ 14.402805] dhd_ioctl_entry: Interface is down
- [ 14.403033] dhd_ioctl_entry: Interface is down
- [ 14.403067] dhd_ioctl_entry: Interface is down
- [ 14.414206] clk_mipicsi_out2io_fracdiv p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
- [ 14.502961] dhd_ioctl_entry: Interface is down
- [ 14.503029] dhd_ioctl_entry: Interface is down
- [ 14.503048] dhd_ioctl_entry: Interface is down
- [ 14.503070] dhd_ioctl_entry: Interface is down
- [ 14.503084] [dhd] WEXT-ERROR) wl_iw_get_essid : Error getting the SSID -22
- [ 14.503100] dhd_ioctl_entry: Interface is down
- [ 14.503136] dhd_ioctl_entry: Interface is down
- [ 14.503159] dhd_ioctl_entry: Interface is down
- [ 14.503192] dhd_ioctl_entry: Interface is down
- [ 14.503212] dhd_ioctl_entry: Interface is down
- [ 14.503824] dhd_ioctl_entry: Interface is down
- [ 14.503881] dhd_ioctl_entry: Interface is down
- [ 14.558097] dhd_ioctl_entry: Interface is down
- [ 14.558297] dhd_ioctl_entry: Interface is down
- [ 14.558329] dhd_ioctl_entry: Interface is down
- [ 14.558354] dhd_ioctl_entry: Interface is down
- [ 14.558376] [dhd] WEXT-ERROR) wl_iw_get_essid : Error getting the SSID -22
- [ 14.558397] dhd_ioctl_entry: Interface is down
- [ 14.558429] dhd_ioctl_entry: Interface is down
- [ 14.558455] dhd_ioctl_entry: Interface is down
- [ 14.558484] dhd_ioctl_entry: Interface is down
- [ 14.558500] dhd_ioctl_entry: Interface is down
- [ 14.558734] dhd_ioctl_entry: Interface is down
- [ 14.558771] dhd_ioctl_entry: Interface is down
- [ 15.096804] dhd_open: Enter 89d17910
- [ 15.096843] dhd_open : no mutex held. set lock
- [ 15.096857]
- [ 15.096857] Dongle Host Driver, version 1.579.77.41.22 (r-20191105-2)(20191120-1)
- [ 15.096874] [dhd-wlan0] wl_android_wifi_on : in g_wifi_on=0
- [ 15.096881] wifi_platform_set_power = 1
- [ 15.096889] ======== PULL WL_REG_ON(-1) HIGH! ========
- [ 15.096897] [WLAN_RFKILL]: rockchip_wifi_power: 1
- [ 15.096904] [WLAN_RFKILL]: wifi turn on power [GPIO-1-0]
- [ 15.472304] sdio_reset_comm():
- [ 15.487374] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
- [ 15.509183] mmc_host mmc1: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
- [ 15.547856] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 15.554014] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 15.560145] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 15.571081] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 15.584368] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
- [ 15.926474] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
- [ 15.926885] sdioh_start: set sd_f2_blocksize 256
- [ 15.927224]
- [ 15.927224]
- [ 15.927224] dhd_bus_devreset: == WLAN ON ==
- [ 15.927615] F1 signature read @0x18000000=0x1541a9a6
- [ 15.931337] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x1 pkg:0x4
- [ 15.932555] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
- [ 15.932779] dhd_bus_set_default_min_res_mask: Unhandled chip id
- [ 15.935510] dhd_os_open_image: /vendor/etc/firmware/config.txt (18 bytes) open success
- [ 15.937699] [dhd] dhd_conf_read_country : ccode = DE
- [ 15.937747] [dhd] dhd_conf_read_country : regrev = 7
- [ 15.937772] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm43438a1.bin
- [ 15.937793] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_ap6212a.txt
- [ 15.937806] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm43438a1.blob
- [ 15.937818] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
- [ 15.940278] dhd_os_open_image: /vendor/etc/firmware/fw_bcm43438a1.bin (436966 bytes) open success
- [ 16.049452] clk_mipicsi_out2io_fracdiv p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
- [ 16.108563] clk_mipicsi_out2io_fracdiv p_rate(297000000) is low than rate(24000000)*20, use integer or half-div
- [ 16.123628] dhd_os_open_image: /vendor/etc/firmware/nvram_ap6212a.txt (1017 bytes) open success
- [ 16.124400] NVRAM version: AP6212A_NVRAM_V1.0.2_20191121
- [ 16.125085] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
- [ 16.164952] set fmt mode 1
- [ 16.199129] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
- [ 16.199820] bcmsdh_oob_intr_register: HW_OOB irq=109 flags=0x4
- [ 16.200102] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist
- [ 16.200127] dhd_get_memdump_info: MEMDUMP ENABLED = 2
- [ 16.201201] Disable tdls_auto_op failed. -1
- [ 16.201293] dhd_tcpack_suppress_set 352: already set to 0
- [ 16.201699] dhd_apply_default_clm: Ignore clm file /vendor/etc/firmware/clm_bcm43438a1.blob
- [ 16.204741] Firmware up: op_mode=0x0005, MAC=08:e9:f6:xx:xx:xx
- [ 16.208413] dhd_preinit_ioctls Set scancache failed -23
- [ 16.222984] Driver: 1.579.77.41.22 (r-20191105-2)(20191120-1)
- [ 16.222984] Firmware: wl0: Dec 21 2020 18:42:52 version 7.45.96.76 (91a4c5d@SYNA) (r745790) FWID 01-1f5c1610 es7.c5.n4.a3
- [ 16.222984] CLM: 7.11.15 (2014-05-26 10:53:55)
- [ 16.223352] dhd_txglom_enable: enable 1
- [ 16.223369] [dhd] dhd_conf_set_txglom_params : txglom_mode=copy
- [ 16.223380] [dhd] dhd_conf_set_txglom_params : txglomsize=36, deferred_tx_len=0
- [ 16.223393] [dhd] dhd_conf_set_txglom_params : txinrx_thres=-1, dhd_txminmax=1
- [ 16.223400] [dhd] dhd_conf_set_txglom_params : tx_max_offset=0, txctl_tmo_fix=300
- [ 16.223412] [dhd] dhd_conf_get_disable_proptx : fw_proptx=1, disable_proptx=-1
- [ 16.224597] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
- [ 16.227109] dhd_pno_init: Support Android Location Service
- [ 16.252165] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
- [ 16.253192] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
- [ 16.253218] dhd_rtt_init : FTM is not supported
- [ 16.253255] dhd_preinit_ioctls: SensorHub diabled 0
- [ 16.254027] dhd_preinit_ioctls failed to set ShubHub disable
- [ 16.256239] dhd_wl_ioctl_get_intiovar: get int iovar wnm_bsstrans_resp failed, ERR -23
- [ 16.256296] failed to get wnm_bsstrans_resp
- [ 16.257105] failed to set WNM capabilities
- [ 16.257594] [dhd] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
- [ 16.257773] [dhd] dhd_conf_set_country : set country DE, revision 7
- [ 16.260792] [dhd] dhd_conf_set_country : Country code: DE (DE/7)
- [ 16.266366] [dhd] CONFIG-ERROR) dhd_conf_set_intiovar : ampdu_mpdu setting failed -29
- [ 16.266424] [dhd-wlan0] wl_android_wifi_on : Success
- [ 16.295110] [dhd] CFG80211-ERROR) __wl_update_wiphybands : error reading vhtmode (-23)
- [ 16.308323] dhd_open : the lock is released.
- [ 16.308361] dhd_open: Exit ret=0
- [ 17.348842] ov2740 1-0036: set exposure val is 0x152
- [ 17.349266] ov2740 1-0036: get exposure mode is menual
- [ 17.635183] P2P interface registered
- [ 17.635302] wl_cfgp2p_add_p2p_disc_if: wdev: ccf6d2f2, wdev->net: (null)
- [ 17.750496] WLC_E_IF: NO_IF set, event Ignored
- [ 17.754032] P2P interface started
- [ 17.767740] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 0, bssidx: 0
- [ 18.280903] mpp_process_request:1102: unknown mpp ioctl cmd 403
- [ 18.871500] [dhd-wlan0] wl_cfg80211_connect : Connecting with 7a:45:58:xx:xx:xx ssid "xxxxxxxxxxxxxxxxxxxxx", len (24), sec=wpa2psk/aes, channel=6
- [ 18.871500]
- [ 18.872729] dhd_dbg_start_pkt_monitor, 1724
- [ 18.986374] [dhd-wlan0] wl_iw_event : Link UP with 7a:45:58:xx:xx:xx
- [ 18.986423] [dhd-wlan0] wl_ext_iapsta_event : [S] Link UP with 7a:45:58:xx:xx:xx
- [ 18.986458] [dhd-wlan0] wl_notify_connect_status : wl_bss_connect_done succeeded with 7a:45:58:xx:xx:xx
- [ 19.023621] [dhd-wlan0] wl_notify_connect_status : wl_bss_connect_done succeeded with 7a:45:58:xx:xx:xx vndr_oui: 00-90-4C 00-0xx:xx:xx
- [ 23.055856] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 1, bssidx: 0
- [ 36.891883] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 2, bssidx: 0
- [ 99.851768] [dhd-wlan0] wl_run_escan : LEGACY_SCAN sync ID: 3, bssidx: 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement