API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Feb 15th, 2025
31
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 42.28 KB | None | 0 0
raw download clone embed print report
  1. System Information
  2. ------------------
  3.  
  4. Raspberry Pi Zero 2 W Rev 1.0
  5. PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
  6. NAME="Debian GNU/Linux"
  7. VERSION_ID="12"
  8. VERSION="12 (bookworm)"
  9.  
  10. Raspberry Pi reference 2024-11-19
  11. Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 891df1e21ed2b6099a2e6a13e26c91dea44b34d4, stage4
  12.  
  13. Linux ater3 6.6.51+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08) aarch64 GNU/Linux
  14. Revision : 902120
  15. Serial : 0000000052593682
  16. Model : Raspberry Pi Zero 2 W Rev 1.0
  17. Throttled flag : throttled=0x0
  18. Camera : supported=0 detected=0, libcamera interfaces=0
  19.  
  20. Videocore information
  21. ---------------------
  22.  
  23. Aug 30 2024 19:19:11
  24. Copyright (c) 2012 Broadcom
  25. version 2808975b80149bbfe86844655fe45c7de66fc078 (clean) (release) (start)
  26.  
  27. alloc failures: 0
  28. compactions: 0
  29. legacy block fails: 0
  30.  
  31.  
  32. Filesystem information
  33. ----------------------
  34. Filesystem 1K-blocks Used Available Use% Mounted on
  35. /dev/root 5161260 4812492 66352 99% /
  36. devtmpfs 178304 0 178304 0% /dev
  37. tmpfs 213504 8 213496 1% /dev/shm
  38. tmpfs 85404 1044 84360 2% /run
  39. tmpfs 5120 0 5120 0% /run/lock
  40. /dev/mmcblk0p1 522230 77108 445122 15% /boot/firmware
  41. tmpfs 42700 44 42656 1% /run/user/1000
  42.  
  43. Filename Type Size Used Priority
  44. /var/swap file 65532 1024 -2
  45.  
  46. Package version information
  47. ---------------------------
  48. raspberrypi-ui-mods:
  49. Installed: 1.20241112
  50. raspberrypi-sys-mods:
  51. Installed: 20241111
  52. openbox:
  53. Installed: 3.6.1-10+rpt1
  54. lxpanel:
  55. Installed: 0.10.1-2+rpt19
  56. pcmanfm:
  57. Installed: 1.3.2-1+rpt28
  58. rpd-plym-splash:
  59. Installed: 0.42
  60.  
  61. Networking Information
  62. ----------------------
  63.  
  64. lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
  65. inet x.x.x.x netmask x.x.x.x
  66. inet6 ::1 prefixlen 128 scopeid 0x10<host>
  67. loop txqueuelen 1000 (Local Loopback)
  68. RX packets 32 bytes 3154 (3.0 KiB)
  69. RX errors 0 dropped 0 overruns 0 frame 0
  70. TX packets 32 bytes 3154 (3.0 KiB)
  71. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  72.  
  73. wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
  74. inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
  75. inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
  76. inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0<global>
  77. ether m.m.m.m txqueuelen 1000 (Ethernet)
  78. RX packets 3475 bytes 386467 (377.4 KiB)
  79. RX errors 0 dropped 2512 overruns 0 frame 0
  80. TX packets 435 bytes 63533 (62.0 KiB)
  81. TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
  82.  
  83.  
  84. USB Information
  85. ---------------
  86.  
  87. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
  88. |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
  89. |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
  90.  
  91. Display Information
  92. -------------------
  93.  
  94. Running Legacy framebuffer
  95.  
  96. Framebuffer: /dev/fb0
  97.  
  98. mode "2560x1600"
  99. geometry 2560 1600 2560 1600 32
  100. timings 0 0 0 0 0 0 0
  101. rgba 8/16,8/8,8/0,8/24
  102. endmode
  103.  
  104.  
  105. Audio Information
  106. -------------------
  107.  
  108.  
  109. null
  110. Discard all samples (playback) or generate zero samples (capture)
  111. default
  112. Playback/recording through the PulseAudio sound server
  113. lavrate
  114. Rate Converter Plugin Using Libav/FFmpeg Library
  115. samplerate
  116. Rate Converter Plugin Using Samplerate Library
  117. speexrate
  118. Rate Converter Plugin Using Speex Resampler
  119. jack
  120. JACK Audio Connection Kit
  121. oss
  122. Open Sound System
  123. pulse
  124. PulseAudio Sound Server
  125. speex
  126. Plugin using Speex DSP (resample, agc, denoise, echo, dereverb)
  127. upmix
  128. Plugin for channel upmix (4,6,8)
  129. vdownmix
  130. Plugin for channel downmix (stereo) with a simple spacialization
  131.  
  132. ● pipewire.socket - PipeWire Multimedia System Sockets
  133. Loaded: loaded (/usr/lib/systemd/user/pipewire.socket; enabled; preset: enabled)
  134. Active: active (running) since Fri 2025-02-14 16:58:31 CET; 19h ago
  135. Triggers: ● pipewire.service
  136. Listen: /run/user/1000/pipewire-0 (Stream)
  137. /run/user/1000/pipewire-0-manager (Stream)
  138. CGroup: /user.slice/user-1000.slice/[email protected]/app.slice/pipewire.socket
  139.  
  140. Feb 14 16:58:31 ater3 systemd[602]: Listening on pipewire.socket - PipeWire Multimedia System Sockets.
  141.  
  142. ● pipewire.service - PipeWire Multimedia Service
  143. Loaded: loaded (/usr/lib/systemd/user/pipewire.service; enabled; preset: enabled)
  144. Active: active (running) since Fri 2025-02-14 16:58:31 CET; 19h ago
  145. TriggeredBy: ● pipewire.socket
  146. Main PID: 620 (pipewire)
  147. Tasks: 3 (limit: 417)
  148. CPU: 233ms
  149. CGroup: /user.slice/user-1000.slice/[email protected]/session.slice/pipewire.service
  150. └─620 /usr/bin/pipewire
  151.  
  152. Feb 14 16:58:31 ater3 systemd[602]: Started pipewire.service - PipeWire Multimedia Service.
  153.  
  154. ○ pulseaudio.service - Sound Service
  155. Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; preset: enabled)
  156. Active: inactive (dead)
  157. TriggeredBy: ○ pulseaudio.socket
  158.  
  159. ○ pulseaudio.socket - Sound System
  160. Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; preset: enabled)
  161. Active: inactive (dead)
  162. Triggers: ● pulseaudio.service
  163. Listen: /run/user/1000/pulse/native (Stream)
  164.  
  165. Server String: /run/user/1000/pulse/native
  166. Library Protocol Version: 35
  167. Server Protocol Version: 35
  168. Is Local: yes
  169. Client Index: 68
  170. Tile Size: 65472
  171. User Name: eoos
  172. Host Name: ater3
  173. Server Name: PulseAudio (on PipeWire 1.2.4)
  174. Server Version: 15.0.0
  175. Default Sample Specification: float32le 2ch 48000Hz
  176. Default Channel Map: front-left,front-right
  177. Default Sink: auto_null
  178. Default Source: auto_null.monitor
  179. Cookie: 63ec:a22b
  180.  
  181. config.txt
  182. ----------
  183.  
  184. ioctl_set_msg failed:-1
  185. get_config int
  186. device_tree=-
  187. overlay_prefix=overlays/
  188. hdmi_cvt:0=
  189. hdmi_cvt:1=
  190. hdmi_edid_filename:0=
  191. hdmi_edid_filename:1=
  192. hdmi_timings:0=2560 0 100 20 100 1600 0 12 4 4 0 0 0 50 0 225180000 0
  193. hdmi_timings:1=
  194.  
  195. cmdline.txt
  196. -----------
  197. coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=2560 bcm2708_fb.fbheight=1600 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:59:36:82 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e9d9b565-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB
  198.  
  199. pin configuration
  200. -----------------
  201.  
  202. 0: ip -- | hi // ID_SDA/GPIO0 = input
  203. 1: ip -- | hi // ID_SCL/GPIO1 = input
  204. 2: a0 -- | hi // GPIO2 = SDA1
  205. 3: a0 -- | hi // GPIO3 = SCL1
  206. 4: ip -- | hi // GPIO4 = input
  207. 5: ip -- | hi // GPIO5 = input
  208. 6: ip -- | hi // GPIO6 = input
  209. 7: ip -- | hi // GPIO7 = input
  210. 8: ip -- | hi // GPIO8 = input
  211. 9: ip -- | lo // GPIO9 = input
  212. 10: ip -- | lo // GPIO10 = input
  213. 11: ip -- | lo // GPIO11 = input
  214. 12: ip -- | lo // GPIO12 = input
  215. 13: ip -- | lo // GPIO13 = input
  216. 14: a5 -- | hi // GPIO14 = TXD1
  217. 15: a5 -- | hi // GPIO15 = RXD1
  218. 16: ip -- | lo // GPIO16 = input
  219. 17: ip -- | lo // GPIO17 = input
  220. 18: ip -- | lo // GPIO18 = input
  221. 19: ip -- | lo // GPIO19 = input
  222. 20: ip -- | lo // GPIO20 = input
  223. 21: ip -- | lo // GPIO21 = input
  224. 22: ip -- | lo // GPIO22 = input
  225. 23: ip -- | lo // GPIO23 = input
  226. 24: ip -- | lo // GPIO24 = input
  227. 25: ip -- | lo // GPIO25 = input
  228. 26: ip -- | lo // GPIO26 = input
  229. 27: ip -- | lo // GPIO27 = input
  230. 28: ip -- | lo // HDMI_HPD_N/GPIO28 = input
  231. 29: op -- -- | lo // STATUS_LED_N/GPIO29 = output
  232. 30: a3 -- | lo // CTS0/GPIO30 = CTS0
  233. 31: a3 -- | lo // RTS0/GPIO31 = RTS0
  234. 32: a3 -- | hi // TXD0/GPIO32 = TXD0
  235. 33: a3 -- | hi // RXD0/GPIO33 = RXD0
  236. 34: a3 -- | hi // SD1_CLK/GPIO34 = SD1_CLK
  237. 35: a3 -- | hi // SD1_CMD/GPIO35 = SD1_CMD
  238. 36: a3 -- | hi // SD1_DATA0/GPIO36 = SD1_DAT0
  239. 37: a3 -- | hi // SD1_DATA1/GPIO37 = SD1_DAT1
  240. 38: a3 -- | hi // SD1_DATA2/GPIO38 = SD1_DAT2
  241. 39: a3 -- | hi // SD1_DATA3/GPIO39 = SD1_DAT3
  242. 40: op -- -- | lo // CAM_GPIO1/GPIO40 = output
  243. 41: op -- -- | hi // WL_ON/GPIO41 = output
  244. 42: op -- -- | hi // BT_ON/GPIO42 = output
  245. 43: a0 -- | lo // WIFI_CLK/GPIO43 = GPCLK2
  246. 44: ip -- | hi // SDA0/GPIO44 = input
  247. 45: ip -- | hi // SCL0/GPIO45 = input
  248. 46: ip -- | hi // SMPS_SCL/GPIO46 = input
  249. 47: op -- -- | hi // SMPS_SDA/GPIO47 = output
  250. 48: a0 -- | lo // SD_CLK_R/GPIO48 = SD0_CLK
  251. 49: a0 -- | hi // SD_CMD_R/GPIO49 = SD0_CMD
  252. 50: a0 -- | hi // SD_DATA0_R/GPIO50 = SD0_DAT0
  253. 51: a0 -- | hi // SD_DATA1_R/GPIO51 = SD0_DAT1
  254. 52: a0 -- | hi // SD_DATA2_R/GPIO52 = SD0_DAT2
  255. 53: a0 -- | hi // SD_DATA3_R/GPIO53 = SD0_DAT3
  256.  
  257. vcdbg log messages
  258. ------------------
  259.  
  260. 001632.911: brfs: File read: /mfs/sd/config.txt
  261. 001633.667: brfs: File read: 597 bytes
  262. 001669.780: brfs: File read: /mfs/sd/config.txt
  263. 001670.678: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  264. 001861.339: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
  265. 001861.400: *** Restart logging
  266. 001861.425: brfs: File read: 597 bytes
  267. 001865.059: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
  268. 001874.731: HDMI0: hdmi_pixel_encoding: 400000000
  269. 001890.043: dtb_file 'bcm2710-rpi-zero-2-w.dtb'
  270. 001893.707: brfs: File read: /mfs/sd/bcm2710-rpi-zero-2-w.dtb
  271. 001893.730: Loaded 'bcm2710-rpi-zero-2-w.dtb' to 0x100 size 0x8384
  272. 001908.783: brfs: File read: 33668 bytes
  273. 001920.192: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
  274. 001950.847: brfs: File read: 5423 bytes
  275. 001953.035: brfs: File read: /mfs/sd/config.txt
  276. 001953.119: dtparam: i2c_arm=on
  277. 001969.743: brfs: File read: 597 bytes
  278. 001970.345: brfs: File read: /mfs/sd/cmdline.txt
  279. 001970.416: Read command line from file 'cmdline.txt':
  280. 001970.441: 'console=serial0,115200 console=tty1 root=PARTUUID=e9d9b565-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB'
  281. 002714.485: brfs: File read: 176 bytes
  282. 003253.675: brfs: File read: /mfs/sd/kernel8.img
  283. 003253.691: Loaded 'kernel8.img' to 0x200000 size 0x8dab16
  284. 004799.161: Device tree loaded to 0x1bfe7800 (size 0x8708)
  285. 004801.030: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
  286. 007791.439: vchiq_core: vchiq_init_state: slot_zero = 0xd8080000, is_master = 1
  287. 007796.304: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
  288. 007801.859: TV service:host side not connected, dropping notification 0x00000002, 0x00000002, 0x00000057
  289.  
  290. dmesg log
  291. ---------
  292.  
  293. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  294. [ 0.000000] Linux version 6.6.51+rpt-rpi-v8 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08)
  295. [ 0.000000] KASLR enabled
  296. [ 0.000000] random: crng init done
  297. [ 0.000000] Machine model: Raspberry Pi Zero 2 W Rev 1.0
  298. [ 0.000000] efi: UEFI not found.
  299. [ 0.000000] Reserved memory: created CMA memory pool at 0x0000000017c00000, size 64 MiB
  300. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  301. [ 0.000000] OF: reserved mem: 0x0000000017c00000..0x000000001bbfffff (65536 KiB) map reusable linux,cma
  302. [ 0.000000] Zone ranges:
  303. [ 0.000000] DMA [mem 0x0000000000000000-0x000000001bffffff]
  304. [ 0.000000] DMA32 empty
  305. [ 0.000000] Normal empty
  306. [ 0.000000] Movable zone start for each node
  307. [ 0.000000] Early memory node ranges
  308. [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
  309. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
  310. [ 0.000000] On node 0, zone DMA: 16384 pages in unavailable ranges
  311. [ 0.000000] percpu: Embedded 30 pages/cpu s85672 r8192 d29016 u122880
  312. [ 0.000000] pcpu-alloc: s85672 r8192 d29016 u122880 alloc=30*4096
  313. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  314. [ 0.000000] Detected VIPT I-cache on CPU0
  315. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  316. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  317. [ 0.000000] CPU features: detected: ARM erratum 843419
  318. [ 0.000000] CPU features: detected: ARM erratum 845719
  319. [ 0.000000] alternatives: applying boot alternatives
  320. [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 bcm2708_fb.fbwidth=2560 bcm2708_fb.fbheight=1600 bcm2708_fb.fbswap=1 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=e9d9b565-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=GB
  321. [ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
  322. [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  323. [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  324. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 112896
  325. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  326. [ 0.000000] Memory: 356612K/458752K available (13440K kernel code, 2212K rwdata, 4268K rodata, 4864K init, 1083K bss, 36604K reserved, 65536K cma-reserved)
  327. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  328. [ 0.000000] ftrace: allocating 43242 entries in 169 pages
  329. [ 0.000000] ftrace: allocated 169 pages with 4 groups
  330. [ 0.000000] trace event string verifier disabled
  331. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  332. [ 0.000000] rcu: RCU event tracing is enabled.
  333. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
  334. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  335. [ 0.000000] Rude variant of Tasks RCU enabled.
  336. [ 0.000000] Tracing variant of Tasks RCU enabled.
  337. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  338. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  339. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  340. [ 0.000000] Root IRQ handler: bcm2836_arm_irqchip_handle_irq
  341. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  342. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
  343. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  344. [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  345. [ 0.000376] Console: colour dummy device 80x25
  346. [ 0.000392] printk: console [tty1] enabled
  347. [ 0.000506] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
  348. [ 0.000527] pid_max: default: 32768 minimum: 301
  349. [ 0.000624] LSM: initializing lsm=capability,integrity
  350. [ 0.000841] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  351. [ 0.000865] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  352. [ 0.001812] cgroup: Disabling memory control group subsystem
  353. [ 0.003697] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  354. [ 0.003822] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  355. [ 0.004001] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
  356. [ 0.004304] rcu: Hierarchical SRCU implementation.
  357. [ 0.004313] rcu: Max phase no-delay instances is 1000.
  358. [ 0.006290] EFI services will not be available.
  359. [ 0.006651] smp: Bringing up secondary CPUs ...
  360. [ 0.007386] Detected VIPT I-cache on CPU1
  361. [ 0.007530] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  362. [ 0.008442] Detected VIPT I-cache on CPU2
  363. [ 0.008554] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  364. [ 0.009345] Detected VIPT I-cache on CPU3
  365. [ 0.009445] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  366. [ 0.009554] smp: Brought up 1 node, 4 CPUs
  367. [ 0.009577] SMP: Total of 4 processors activated.
  368. [ 0.009587] CPU features: detected: 32-bit EL0 Support
  369. [ 0.009594] CPU features: detected: 32-bit EL1 Support
  370. [ 0.009603] CPU features: detected: CRC32 instructions
  371. [ 0.009724] CPU: All CPU(s) started at EL2
  372. [ 0.009743] alternatives: applying system-wide alternatives
  373. [ 0.012471] devtmpfs: initialized
  374. [ 0.024973] Enabled cp15_barrier support
  375. [ 0.025008] Enabled setend support
  376. [ 0.025231] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  377. [ 0.025259] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  378. [ 0.028362] pinctrl core: initialized pinctrl subsystem
  379. [ 0.029082] DMI not present or invalid.
  380. [ 0.029716] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  381. [ 0.036721] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  382. [ 0.037083] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  383. [ 0.037673] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  384. [ 0.037769] audit: initializing netlink subsys (disabled)
  385. [ 0.038049] audit: type=2000 audit(0.036:1): state=initialized audit_enabled=0 res=1
  386. [ 0.038835] thermal_sys: Registered thermal governor 'step_wise'
  387. [ 0.038898] cpuidle: using governor menu
  388. [ 0.039237] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  389. [ 0.039383] ASID allocator initialised with 32768 entries
  390. [ 0.040418] Serial: AMBA PL011 UART driver
  391. [ 0.045581] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  392. [ 0.056416] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-08-30T19:19:11, variant start
  393. [ 0.060437] raspberrypi-firmware soc:firmware: Firmware hash is 2808975b80149bbfe86844655fe45c7de66fc078
  394. [ 0.068552] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
  395. [ 0.068567] Modules: 0 pages in range for non-PLT usage
  396. [ 0.068574] Modules: 517776 pages in range for PLT usage
  397. [ 0.073665] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
  398. [ 0.075124] iommu: Default domain type: Translated
  399. [ 0.075136] iommu: DMA domain TLB invalidation policy: strict mode
  400. [ 0.076861] SCSI subsystem initialized
  401. [ 0.077128] usbcore: registered new interface driver usbfs
  402. [ 0.077179] usbcore: registered new interface driver hub
  403. [ 0.077246] usbcore: registered new device driver usb
  404. [ 0.077684] pps_core: LinuxPPS API ver. 1 registered
  405. [ 0.077694] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  406. [ 0.077720] PTP clock support registered
  407. [ 0.079198] vgaarb: loaded
  408. [ 0.079861] clocksource: Switched to clocksource arch_sys_counter
  409. [ 0.080365] VFS: Disk quotas dquot_6.6.0
  410. [ 0.080416] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  411. [ 0.080569] FS-Cache: Loaded
  412. [ 0.083731] CacheFiles: Loaded
  413. [ 0.094359] NET: Registered PF_INET protocol family
  414. [ 0.094758] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  415. [ 0.096090] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
  416. [ 0.096123] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  417. [ 0.096145] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
  418. [ 0.096267] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
  419. [ 0.096454] TCP: Hash tables configured (established 4096 bind 4096)
  420. [ 0.096715] MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
  421. [ 0.096786] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  422. [ 0.096822] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  423. [ 0.097014] NET: Registered PF_UNIX/PF_LOCAL protocol family
  424. [ 0.097615] RPC: Registered named UNIX socket transport module.
  425. [ 0.097628] RPC: Registered udp transport module.
  426. [ 0.097635] RPC: Registered tcp transport module.
  427. [ 0.097641] RPC: Registered tcp-with-tls transport module.
  428. [ 0.097648] RPC: Registered tcp NFSv4.1 backchannel transport module.
  429. [ 0.097669] PCI: CLS 0 bytes, default 64
  430. [ 0.098518] kvm [1]: IPA Size Limit: 40 bits
  431. [ 0.100260] kvm [1]: Hyp mode initialized successfully
  432. [ 1.701611] Initialise system trusted keyrings
  433. [ 1.701937] workingset: timestamp_bits=46 max_order=17 bucket_order=0
  434. [ 1.702040] zbud: loaded
  435. [ 1.702905] NFS: Registering the id_resolver key type
  436. [ 1.702933] Key type id_resolver registered
  437. [ 1.702942] Key type id_legacy registered
  438. [ 1.702971] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  439. [ 1.702981] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  440. [ 1.703800] Key type asymmetric registered
  441. [ 1.703814] Asymmetric key parser 'x509' registered
  442. [ 1.703922] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  443. [ 1.704109] io scheduler mq-deadline registered
  444. [ 1.704121] io scheduler kyber registered
  445. [ 1.704161] io scheduler bfq registered
  446. [ 1.706542] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
  447. [ 1.708128] bcm2708_fb soc:fb: FB found 1 display(s)
  448. [ 1.766509] Console: switching to colour frame buffer device 320x100
  449. [ 1.809529] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 2560x1600
  450. [ 1.813494] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
  451. [ 1.815922] bcm2835-rng 3f104000.rng: hwrng registered
  452. [ 1.816296] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  453. [ 1.832521] brd: module loaded
  454. [ 1.841852] loop: module loaded
  455. [ 1.842626] Loading iSCSI transport class v2.0-870.
  456. [ 1.848221] usbcore: registered new device driver r8152-cfgselector
  457. [ 1.848298] usbcore: registered new interface driver r8152
  458. [ 1.848357] usbcore: registered new interface driver lan78xx
  459. [ 1.848405] usbcore: registered new interface driver smsc95xx
  460. [ 1.848650] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  461. [ 2.576897] Core Release: 2.80a
  462. [ 2.576916] Setting default values for core params
  463. [ 2.576946] Finished setting default values for core params
  464. [ 2.777300] Using Buffer DMA mode
  465. [ 2.777310] Periodic Transfer Interrupt Enhancement - disabled
  466. [ 2.777319] Multiprocessor Interrupt Enhancement - disabled
  467. [ 2.777328] OTG VER PARAM: 0, OTG VER FLAG: 0
  468. [ 2.777345] Dedicated Tx FIFOs mode
  469.  
  470. [ 2.777788] WARN::dwc_otg_hcd_init:1070: FIQ DMA bounce buffers: virt = ffffffc080489000 dma = 0x00000000d8010000 len=9024
  471. [ 2.777829] FIQ FSM acceleration enabled for :
  472. Non-periodic Split Transactions
  473. Periodic Split Transactions
  474. High-Speed Isochronous Endpoints
  475. Interrupt/Control Split Transaction hack enabled
  476. [ 2.777844] dwc_otg: Microframe scheduler enabled
  477.  
  478. [ 2.777886] WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc080065000
  479. [ 2.777949] dwc_otg 3f980000.usb: DWC OTG Controller
  480. [ 2.777988] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  481. [ 2.778036] dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
  482. [ 2.778092] Init: Port Power? op_state=1
  483. [ 2.778100] Init: Power Port (0)
  484. [ 2.778402] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
  485. [ 2.778420] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  486. [ 2.778435] usb usb1: Product: DWC OTG Controller
  487. [ 2.778448] usb usb1: Manufacturer: Linux 6.6.51+rpt-rpi-v8 dwc_otg_hcd
  488. [ 2.778460] usb usb1: SerialNumber: 3f980000.usb
  489. [ 2.779283] hub 1-0:1.0: USB hub found
  490. [ 2.779333] hub 1-0:1.0: 1 port detected
  491. [ 2.780132] dwc_otg: FIQ enabled
  492. [ 2.780142] dwc_otg: NAK holdoff enabled
  493. [ 2.780149] dwc_otg: FIQ split-transaction FSM enabled
  494. [ 2.780172] Module dwc_common_port init
  495. [ 2.781025] usbcore: registered new interface driver uas
  496. [ 2.781101] usbcore: registered new interface driver usb-storage
  497. [ 2.781694] mousedev: PS/2 mouse device common for all mice
  498. [ 2.784552] sdhci: Secure Digital Host Controller Interface driver
  499. [ 2.784568] sdhci: Copyright(c) Pierre Ossman
  500. [ 2.784789] sdhci-pltfm: SDHCI platform and OF driver helper
  501. [ 2.786122] ledtrig-cpu: registered to indicate activity on CPUs
  502. [ 2.786553] hid: raw HID events driver (C) Jiri Kosina
  503. [ 2.786737] usbcore: registered new interface driver usbhid
  504. [ 2.786748] usbhid: USB HID core driver
  505. [ 2.786861] bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default
  506. [ 2.792806] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  507. [ 2.794212] NET: Registered PF_PACKET protocol family
  508. [ 2.794380] Key type dns_resolver registered
  509. [ 2.831762] registered taskstats version 1
  510. [ 2.832134] Loading compiled-in X.509 certificates
  511. [ 2.847467] Key type .fscrypt registered
  512. [ 2.847496] Key type fscrypt-provisioning registered
  513. [ 2.859595] uart-pl011 3f201000.serial: cts_event_workaround enabled
  514. [ 2.860234] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
  515. [ 2.860591] serial serial0: tty port ttyAMA1 registered
  516. [ 2.862269] bcm2835-aux-uart 3f215040.serial: there is not valid maps for state default
  517. [ 2.863176] printk: console [ttyS0] disabled
  518. [ 2.863825] 3f215040.serial: ttyS0 at MMIO 0x3f215040 (irq = 71, base_baud = 50000000) is a 16550
  519. [ 2.863937] printk: console [ttyS0] enabled
  520. [ 2.865645] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  521. [ 2.865994] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  522. [ 2.867575] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
  523. [ 2.867596] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
  524. [ 2.888009] Indeed it is in host mode hprt0 = 00021501
  525. [ 2.896689] sdhost: log_buf @ 0000000073eeef86 (c2b5a000)
  526. [ 2.944625] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  527. [ 2.947109] of_cfs_init
  528. [ 2.947306] of_cfs_init: OK
  529. [ 2.947645] clk: Disabling unused clocks
  530. [ 2.948593] Waiting for root device PARTUUID=e9d9b565-02...
  531. [ 2.979747] mmc0: host does not support reading read-only switch, assuming write-enable
  532. [ 2.982310] mmc0: Host Software Queue enabled
  533. [ 2.982337] mmc0: new high speed SDXC card at address 59b4
  534. [ 2.983636] mmcblk0: mmc0:59b4 USDU1 57.5 GiB
  535. [ 2.987400] mmcblk0: p1 p2
  536. [ 2.988156] mmcblk0: mmc0:59b4 USDU1 57.5 GiB
  537. [ 3.005565] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  538. [ 3.005600] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  539. [ 3.072280] mmc1: new high speed SDIO card at address 0001
  540. [ 3.079902] usb 1-1: new full-speed USB device number 2 using dwc_otg
  541. [ 3.080168] Indeed it is in host mode hprt0 = 00021501
  542. [ 3.289616] usb 1-1: New USB device found, idVendor=feed, idProduct=0000, bcdDevice= 1.00
  543. [ 3.289655] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  544. [ 3.289672] usb 1-1: Product: ate_b1
  545. [ 3.289685] usb 1-1: Manufacturer: ate
  546. [ 3.294220] input: ate ate_b1 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1:1.0/0003:FEED:0000.0001/input/input0
  547. [ 3.353244] hid-generic 0003:FEED:0000.0001: input,hidraw0: USB HID v1.11 Keyboard [ate ate_b1] on usb-3f980000.usb-1/input0
  548. [ 3.361472] input: ate ate_b1 Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1:1.1/0003:FEED:0000.0002/input/input1
  549. [ 3.362139] input: ate ate_b1 System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1:1.1/0003:FEED:0000.0002/input/input2
  550. [ 3.420687] input: ate ate_b1 Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1:1.1/0003:FEED:0000.0002/input/input3
  551. [ 3.421130] input: ate ate_b1 Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1:1.1/0003:FEED:0000.0002/input/input4
  552. [ 3.422644] hid-generic 0003:FEED:0000.0002: input,hidraw1: USB HID v1.11 Mouse [ate ate_b1] on usb-3f980000.usb-1/input1
  553. [ 3.810738] EXT4-fs (mmcblk0p2): recovery complete
  554. [ 3.813961] EXT4-fs (mmcblk0p2): mounted filesystem a36be96c-66be-4487-a7a6-0481bca99d89 ro with ordered data mode. Quota mode: none.
  555. [ 3.814085] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  556. [ 3.815319] devtmpfs: mounted
  557. [ 3.827405] Freeing unused kernel memory: 4864K
  558. [ 3.827677] Run /sbin/init as init process
  559. [ 3.827688] with arguments:
  560. [ 3.827695] /sbin/init
  561. [ 3.827704] splash
  562. [ 3.827711] with environment:
  563. [ 3.827718] HOME=/
  564. [ 3.827725] TERM=linux
  565. [ 4.486997] systemd[1]: System time before build time, advancing clock.
  566. [ 4.735122] NET: Registered PF_INET6 protocol family
  567. [ 4.737131] Segment Routing with IPv6
  568. [ 4.737186] In-situ OAM (IOAM) with IPv6
  569. [ 4.833751] systemd[1]: systemd 252.31-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  570. [ 4.833812] systemd[1]: Detected architecture arm64.
  571. [ 4.841071] systemd[1]: Hostname set to <ater3>.
  572. [ 6.013445] systemd[1]: Queued start job for default target graphical.target.
  573. [ 6.036727] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
  574. [ 6.039355] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
  575. [ 6.041724] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
  576. [ 6.044049] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
  577. [ 6.045355] systemd[1]: Created slice user.slice - User and Session Slice.
  578. [ 6.046325] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
  579. [ 6.047740] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
  580. [ 6.048058] systemd[1]: Expecting device dev-disk-by\x2dpartuuid-e9d9b565\x2d01.device - /dev/disk/by-partuuid/e9d9b565-01...
  581. [ 6.048160] systemd[1]: Expecting device dev-ttyS0.device - /dev/ttyS0...
  582. [ 6.048532] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
  583. [ 6.048890] systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
  584. [ 6.049156] systemd[1]: Reached target slices.target - Slice Units.
  585. [ 6.049345] systemd[1]: Reached target swap.target - Swaps.
  586. [ 6.049609] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
  587. [ 6.050650] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
  588. [ 6.051150] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
  589. [ 6.053404] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
  590. [ 6.054521] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
  591. [ 6.055644] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
  592. [ 6.058756] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
  593. [ 6.059688] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
  594. [ 6.060989] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
  595. [ 6.084583] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
  596. [ 6.091767] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
  597. [ 6.099638] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
  598. [ 6.100929] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
  599. [ 6.111032] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
  600. [ 6.119727] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
  601. [ 6.129112] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
  602. [ 6.140554] systemd[1]: Starting [email protected] - Load Kernel Module configfs...
  603. [ 6.150850] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
  604. [ 6.161567] systemd[1]: Starting [email protected] - Load Kernel Module drm...
  605. [ 6.172491] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
  606. [ 6.182912] systemd[1]: Starting [email protected] - Load Kernel Module fuse...
  607. [ 6.193481] systemd[1]: Starting [email protected] - Load Kernel Module loop...
  608. [ 6.204803] systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
  609. [ 6.238555] systemd[1]: Starting systemd-journald.service - Journal Service...
  610. [ 6.269296] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: [email protected]
  611. [ 6.274761] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
  612. [ 6.293296] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
  613. [ 6.325295] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
  614. [ 6.326739] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
  615. [ 6.328900] fuse: init (API version 7.39)
  616. [ 6.331245] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
  617. [ 6.337830] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
  618. [ 6.341848] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
  619. [ 6.349354] systemd[1]: [email protected]: Deactivated successfully.
  620. [ 6.350840] systemd[1]: Finished [email protected] - Load Kernel Module configfs.
  621. [ 6.354075] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
  622. [ 6.355533] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
  623. [ 6.359119] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
  624. [ 6.360864] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
  625. [ 6.363679] systemd[1]: [email protected]: Deactivated successfully.
  626. [ 6.365959] systemd[1]: Finished [email protected] - Load Kernel Module fuse.
  627. [ 6.370049] systemd[1]: [email protected]: Deactivated successfully.
  628. [ 6.371589] systemd[1]: Finished [email protected] - Load Kernel Module loop.
  629. [ 6.404787] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
  630. [ 6.427318] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
  631. [ 6.443693] systemd[1]: Started systemd-fsckd.service - File System Check Daemon to report status.
  632. [ 6.445926] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
  633. [ 6.459102] systemd[1]: [email protected]: Deactivated successfully.
  634. [ 6.468378] systemd[1]: Finished [email protected] - Load Kernel Module drm.
  635. [ 6.470477] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
  636. [ 6.471448] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
  637. [ 6.502457] i2c_dev: i2c /dev entries driver
  638. [ 6.510464] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
  639. [ 6.553147] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
  640. [ 6.608925] systemd[1]: Finished systemd-fsck-root.service - File System Check on Root Device.
  641. [ 6.653701] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
  642. [ 6.668394] systemd[1]: Started systemd-journald.service - Journal Service.
  643. [ 6.911285] EXT4-fs (mmcblk0p2): re-mounted a36be96c-66be-4487-a7a6-0481bca99d89 r/w. Quota mode: none.
  644. [ 7.033756] systemd-journald[132]: Received client request to flush runtime journal.
  645. [ 9.319170] mc: Linux media interface: v0.10
  646. [ 9.340725] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
  647. [ 9.348630] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  648. [ 9.348680] [vc_sm_connected_init]: start
  649. [ 9.356775] [vc_sm_connected_init]: installed successfully
  650. [ 9.418754] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  651. [ 9.493316] videodev: Linux video capture interface: v2.00
  652. [ 9.526911] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  653. [ 9.554197] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
  654. [ 9.580965] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  655. [ 9.594009] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
  656. [ 9.600616] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  657. [ 9.606865] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
  658. [ 9.614504] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
  659. [ 9.616227] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  660. [ 9.616321] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  661. [ 9.616974] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
  662. [ 9.617033] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  663. [ 9.617062] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  664. [ 9.617090] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  665. [ 9.617161] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  666. [ 9.621582] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  667. [ 9.621662] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  668. [ 9.628953] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
  669. [ 9.632230] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
  670. [ 9.639582] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  671. [ 9.639670] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  672. [ 9.640432] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
  673. [ 9.645127] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
  674. [ 9.647756] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
  675. [ 9.652472] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
  676. [ 9.652562] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
  677. [ 9.680198] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
  678. [ 9.680280] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
  679. [ 9.680308] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
  680. [ 9.680330] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
  681. [ 9.680347] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
  682. [ 9.680879] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
  683. [ 9.682728] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
  684. [ 9.682825] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
  685. [ 10.354520] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  686. [ 10.406460] Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
  687. [ 10.412247] Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
  688. [ 10.413954] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  689. [ 10.415541] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
  690. [ 10.462122] Bluetooth: Core ver 2.22
  691. [ 10.465777] NET: Registered PF_BLUETOOTH protocol family
  692. [ 10.465815] Bluetooth: HCI device and connection manager initialized
  693. [ 10.465855] Bluetooth: HCI socket layer initialized
  694. [ 10.465878] Bluetooth: L2CAP socket layer initialized
  695. [ 10.465939] Bluetooth: SCO socket layer initialized
  696. [ 10.542763] Bluetooth: HCI UART driver ver 2.3
  697. [ 10.542803] Bluetooth: HCI UART protocol H4 registered
  698. [ 10.542985] Bluetooth: HCI UART protocol Three-wire (H5) registered
  699. [ 10.543541] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
  700. [ 10.544211] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
  701. [ 10.548162] Bluetooth: HCI UART protocol Broadcom registered
  702. [ 10.664355] uart-pl011 3f201000.serial: no DMA platform data
  703. [ 10.905064] Bluetooth: hci0: BCM: chip id 94
  704. [ 10.905521] Bluetooth: hci0: BCM: features 0x2e
  705. [ 10.906927] Bluetooth: hci0: BCM43430A1
  706. [ 10.906965] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000
  707. [ 10.913256] Bluetooth: hci0: BCM43430A1 'brcm/BCM43430A1.raspberrypi,model-zero-2-w.hcd' Patch
  708. [ 10.928306] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
  709. [ 10.939090] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
  710. [ 10.941258] usbcore: registered new interface driver brcmfmac
  711. [ 11.228594] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
  712. [ 11.229480] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jun 14 2023 07:27:45 version 7.45.96.s1 (gf031a129) FWID 01-70bd2af7 es7
  713. [ 11.706349] Bluetooth: hci0: BCM: features 0x2e
  714. [ 11.711456] Bluetooth: hci0: BCM43436 37.4MHz Class 1.5 RaspBerry Pi Zero2 [Version: 1017.1042]
  715. [ 11.711528] Bluetooth: hci0: BCM43430A1 (001.002.009) build 1042
  716. [ 11.712408] Bluetooth: hci0: BCM: Using default device address (m.m.m.m)
  717. [ 11.990510] Adding 65532k swap on /var/swap. Priority:-2 extents:1 across:65532k SS
  718. [ 14.931356] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
  719. [ 15.171476] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  720. [ 15.171507] Bluetooth: BNEP filters: protocol multicast
  721. [ 15.171528] Bluetooth: BNEP socket layer initialized
  722. [ 15.188864] Bluetooth: MGMT ver 1.22
  723. [ 15.212740] NET: Registered PF_ALG protocol family
  724. [ 17.404231] systemd[602]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
  725. [ 19.655823] Bluetooth: RFCOMM TTY layer initialized
  726. [ 19.655964] Bluetooth: RFCOMM socket layer initialized
  727. [ 19.655996] Bluetooth: RFCOMM ver 1.11
  728. [ 3667.891870] raspberrypi-firmware soc:firmware: Request 0x00030080 returned status 0x80000001
  729. [ 3668.012838] raspberrypi-firmware soc:firmware: failed to allocate a DMA channel
  730. [ 3703.432502] raspberrypi-firmware soc:firmware: Request 0x00030080 returned status 0x80000001
  731. [ 3703.517578] raspberrypi-firmware soc:firmware: failed to allocate a DMA channel
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!