Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Red
- Device Model: WDC WD40EFRX-68N32N0
- Serial Number: WD-WCC7K2YF4UTL
- LU WWN Device Id: 5 0014ee 2649163d1
- Firmware Version: 82.00A82
- User Capacity: 4,000,787,030,016 bytes [4.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 5400 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Mon Feb 11 16:43:11 2019 PST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (43860) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 465) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x303d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 169 169 021 - 6541
- 4 Start_Stop_Count -O--CK 100 100 000 - 125
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 086 086 000 - 10701
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 123
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 120
- 193 Load_Cycle_Count -O--CK 200 200 000 - 44
- 194 Temperature_Celsius -O---K 120 106 000 - 30
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 0
- 198 Offline_Uncorrectable ----CK 100 253 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
- 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log
- 0xb7 GPL,SL VS 56 Device vendor specific log
- 0xbd GPL,SL VS 1 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc1 GPL VS 93 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 10647 -
- # 2 Short offline Completed without error 00% 10343 -
- # 3 Extended offline Completed without error 00% 10255 -
- # 4 Short offline Completed without error 00% 10176 -
- # 5 Short offline Completed without error 00% 10008 -
- # 6 Extended offline Completed without error 00% 9919 -
- # 7 Short offline Completed without error 00% 9840 -
- # 8 Short offline Completed without error 00% 9600 -
- # 9 Extended offline Completed without error 00% 9512 -
- #10 Short offline Completed without error 00% 9432 -
- #11 Short offline Completed without error 00% 9265 -
- #12 Extended offline Completed without error 00% 9176 -
- #13 Short offline Completed without error 00% 9097 -
- #14 Short offline Completed without error 00% 8881 -
- #15 Extended offline Completed without error 00% 8792 -
- #16 Short offline Completed without error 00% 8713 -
- #17 Short offline Completed without error 00% 8545 -
- #18 Extended offline Completed without error 00% 8046 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 30 Celsius
- Power Cycle Min/Max Temperature: 18/34 Celsius
- Lifetime Min/Max Temperature: 18/44 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/65 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (387)
- Index Estimated Time Temperature Celsius
- 388 2019-02-11 08:46 29 **********
- ... ..(440 skipped). .. **********
- 351 2019-02-11 16:07 29 **********
- 352 2019-02-11 16:08 30 ***********
- ... ..( 6 skipped). .. ***********
- 359 2019-02-11 16:15 30 ***********
- 360 2019-02-11 16:16 29 **********
- ... ..( 26 skipped). .. **********
- 387 2019-02-11 16:43 29 **********
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 123 --- Lifetime Power-On Resets
- 0x01 0x010 4 10701 --- Power-on Hours
- 0x01 0x018 6 49600406334 --- Logical Sectors Written
- 0x01 0x020 6 591124152 --- Number of Write Commands
- 0x01 0x028 6 131035423839 --- Logical Sectors Read
- 0x01 0x030 6 1005826075 --- Number of Read Commands
- 0x01 0x038 6 4163861632 --- Date and Time TimeStamp
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 10664 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 10568 --- Head Flying Hours
- 0x03 0x018 4 165 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 0 --- Read Recovery Attempts
- 0x03 0x030 4 0 --- Number of Mechanical Start Failures
- 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 120 --- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 30 --- Current Temperature
- 0x05 0x010 1 29 --- Average Short Term Temperature
- 0x05 0x018 1 28 --- Average Long Term Temperature
- 0x05 0x020 1 44 --- Highest Temperature
- 0x05 0x028 1 22 --- Lowest Temperature
- 0x05 0x030 1 40 --- Highest Average Short Term Temperature
- 0x05 0x038 1 24 --- Lowest Average Short Term Temperature
- 0x05 0x040 1 37 --- Highest Average Long Term Temperature
- 0x05 0x048 1 28 --- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 65 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 1147 --- Number of Hardware Resets
- 0x06 0x010 4 27 --- Number of ASR Events
- 0x06 0x018 4 0 --- Number of Interface CRC Errors
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 430970 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement