Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- # lsb_release -a
- No LSB modules are available.
- Distributor ID: Ubuntu
- Description: Ubuntu 18.04.1 LTS
- Release: 18.04
- Codename: bionic
- # uname -a
- Linux kb 4.15.0-34-generic #37-Ubuntu SMP Mon Aug 27 15:21:48 UTC 2018
- x86_64 x86_64 x86_64 GNU/Linux
- # lscpu
- Architecture: x86_64
- CPU op-mode(s): 32-bit, 64-bit
- Byte Order: Little Endian
- CPU(s): 1
- On-line CPU(s) list: 0
- Thread(s) per core: 1
- Core(s) per socket: 1
- Socket(s): 1
- NUMA node(s): 1
- Vendor ID: GenuineIntel
- CPU family: 6
- Model: 86
- Model name: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz
- Stepping: 3
- CPU MHz: 800.134
- CPU max MHz: 2200,0000
- CPU min MHz: 800,0000
- BogoMIPS: 4399.64
- Virtualization: VT-x
- L1d cache: 32K
- L1i cache: 32K
- L2 cache: 256K
- L3 cache: 6144K
- NUMA node0 CPU(s): 0
- Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
- mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall
- nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl
- xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl
- vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2
- x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm
- abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 invpcid_single pti
- intel_ppin ssbd ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid
- fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a
- rdseed adx smap intel_pt xsaveopt cqm_llc cqm_occup_llc cqm_mbm_total
- cqm_mbm_local dtherm arat pln pts flush_l1d
- [ 0.000000] Linux version 4.15.0-34-generic (buildd@lgw01-amd64-047) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #37-Ubuntu SMP Mon Aug 27 15:21:48 UTC 2018 (Ubuntu 4.15.0-34.37-generic 4.15.18)
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=5c533343-893f-4dbd-8dbe-2bf1eedeb960 ro quiet nr_cpus=8 splash vt.handoff=1
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000796ebfff] usable
- [ 0.000000] BIOS-e820: [mem 0x00000000796ec000-0x00000000798bafff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000798bb000-0x0000000079a26fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000079a27000-0x0000000079e57fff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x0000000079e58000-0x000000007bd4cfff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000007bd4d000-0x000000007bdb0fff] type 20
- [ 0.000000] BIOS-e820: [mem 0x000000007bdb1000-0x000000007bdb1fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007bdb2000-0x000000007be37fff] reserved
- [ 0.000000] BIOS-e820: [mem 0x000000007be38000-0x000000007bffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] efi: EFI v2.40 by American Megatrends
- [ 0.000000] efi: ACPI=0x79ae7000 ACPI 2.0=0x79ae7000 ESRT=0x7bb14e18
- [ 0.000000] secureboot: Secure boot could not be determined (mode 0)
- [ 0.000000] DMI not present or invalid.
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: write-back
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000080000000 mask 3FFF80000000 uncachable
- [ 0.000000] 1 base 380000000000 mask 3FC000000000 uncachable
- [ 0.000000] 2 base 0000E0000000 mask 3FFFF0000000 write-through
- [ 0.000000] 3 base 0000F0000000 mask 3FFFFE000000 write-through
- [ 0.000000] 4 base 0000F2000000 mask 3FFFFFC00000 write-through
- [ 0.000000] 5 base 0000F2400000 mask 3FFFFFE00000 write-through
- [ 0.000000] 6 base 0000F2600000 mask 3FFFFFF00000 write-through
- [ 0.000000] 7 disabled
- [ 0.000000] 8 disabled
- [ 0.000000] 9 disabled
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.000000] esrt: Reserving ESRT space from 0x000000007bb14e18 to 0x000000007bb14e50.
- [ 0.000000] Scanning 1 areas for low memory corruption
- [ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] BRK [0x4753e000, 0x4753efff] PGTABLE
- [ 0.000000] BRK [0x4753f000, 0x4753ffff] PGTABLE
- [ 0.000000] BRK [0x47540000, 0x47540fff] PGTABLE
- [ 0.000000] BRK [0x47541000, 0x47541fff] PGTABLE
- [ 0.000000] BRK [0x47542000, 0x47542fff] PGTABLE
- [ 0.000000] BRK [0x47543000, 0x47543fff] PGTABLE
- [ 0.000000] BRK [0x47544000, 0x47544fff] PGTABLE
- [ 0.000000] BRK [0x47545000, 0x47545fff] PGTABLE
- [ 0.000000] BRK [0x47546000, 0x47546fff] PGTABLE
- [ 0.000000] BRK [0x47547000, 0x47547fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x1da3a000-0x21765fff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x0000000079AE7000 000024 (v02 SUPERM)
- [ 0.000000] ACPI: XSDT 0x0000000079AE7080 00007C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
- [ 0.000000] ACPI: FACP 0x0000000079AFF8A8 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
- [ 0.000000] ACPI: DSDT 0x0000000079AE7190 018716 (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
- [ 0.000000] ACPI: FACS 0x0000000079E56F80 000040
- [ 0.000000] ACPI: APIC 0x0000000079AFF9B8 00004C (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
- [ 0.000000] ACPI: FPDT 0x0000000079AFFA08 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
- [ 0.000000] ACPI: FIDT 0x0000000079AFFA50 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
- [ 0.000000] ACPI: SPMI 0x0000000079AFFAF0 000041 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
- [ 0.000000] ACPI: MCFG 0x0000000079AFFB38 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
- [ 0.000000] ACPI: UEFI 0x0000000079AFFB78 000042 (v01 00000000 00000000)
- [ 0.000000] ACPI: DBG2 0x0000000079AFFBC0 000072 (v00 SUPERM SMCI--MB 00000000 INTL 20091013)
- [ 0.000000] ACPI: HPET 0x0000000079AFFC38 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
- [ 0.000000] ACPI: WDDT 0x0000000079AFFC70 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
- [ 0.000000] ACPI: SSDT 0x0000000079AFFCB0 00EDCB (v01 AMI PmMgt 00000001 INTL 20120913)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bffffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x799fc000-0x79a26fff]
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007bffffff]
- [ 0.000000] Normal empty
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000796ebfff]
- [ 0.000000] node 0: [mem 0x00000000798bb000-0x0000000079a26fff]
- [ 0.000000] node 0: [mem 0x000000007bdb1000-0x000000007bdb1fff]
- [ 0.000000] node 0: [mem 0x000000007be38000-0x000000007bffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
- [ 0.000000] On node 0 totalpages: 498112
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 27 pages reserved
- [ 0.000000] DMA zone: 3999 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 7872 pages used for memmap
- [ 0.000000] DMA32 zone: 494113 pages, LIFO batch:31
- [ 0.000000] Reserved but unavailable: 98 pages
- [ 0.000000] ACPI: PM-Timer IO Port: 0x408
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: No LAPIC entries present
- [ 0.000000] Using ACPI for processor (LAPIC) configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
- [ 0.000000] smpboot: Boot CPU (id 0) not listed by BIOS
- [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
- [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x796ec000-0x798bafff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x79a27000-0x79e57fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x79e58000-0x7bd4cfff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x7bd4d000-0x7bdb0fff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x7bdb2000-0x7be37fff]
- [ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
- [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
- [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:1 nr_cpu_ids:1 nr_node_ids:1
- [ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u2097152
- [ 0.000000] pcpu-alloc: s151552 r8192 d28672 u2097152 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 490149
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-34-generic root=UUID=5c533343-893f-4dbd-8dbe-2bf1eedeb960 ro quiet nr_cpus=8 splash vt.handoff=1
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] Memory: 1493264K/1992448K available (12300K kernel code, 2471K rwdata, 4244K rodata, 2408K init, 2416K bss, 499184K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Kernel/User page tables isolation: enabled
- [ 0.000000] ftrace: allocating 39147 entries in 153 pages
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=1.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
- [ 0.000000] NR_IRQS: 524544, nr_irqs: 32, preallocated irqs: 16
- [ 0.000000] vt handoff: transparent VT on vt#1
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] ACPI: Core revision 20170831
- [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.000000] ACPI: setting ELCR to 0200 (from 0000)
- [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
- [ 0.000000] hpet clockevent registered
- [ 0.000000] APIC: Switch to symmetric I/O mode setup
- [ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
- [ 0.000000] tsc: Fast TSC calibration using PIT
- [ 0.004000] tsc: Detected 2199.822 MHz processor
- [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4399.64 BogoMIPS (lpj=8799288)
- [ 0.004000] pid_max: default: 32768 minimum: 301
- [ 0.004000] Security Framework initialized
- [ 0.004000] Yama: becoming mindful.
- [ 0.004000] AppArmor: AppArmor initialized
- [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.004000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.004000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.004000] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
- [ 0.004000] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
- [ 0.004000] mce: CPU supports 22 MCE banks
- [ 0.004000] CPU0: Thermal monitoring enabled (TM1)
- [ 0.004000] process: using mwait in idle threads
- [ 0.004000] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
- [ 0.004000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
- [ 0.004000] Spectre V2 : Mitigation: Full generic retpoline
- [ 0.004000] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
- [ 0.004000] Spectre V2 : Enabling Restricted Speculation for firmware calls
- [ 0.004000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
- [ 0.030081] Freeing SMP alternatives memory: 36K
- [ 0.053603] TSC deadline timer enabled
- [ 0.053607] smpboot: CPU0: Intel(R) Xeon(R) CPU D-1518 @ 2.20GHz (family: 0x6, model: 0x56, stepping: 0x3)
- [ 0.053754] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
- [ 0.053813] ... version: 3
- [ 0.053815] ... bit width: 48
- [ 0.053816] ... generic registers: 4
- [ 0.053818] ... value mask: 0000ffffffffffff
- [ 0.053820] ... max period: 00007fffffffffff
- [ 0.053821] ... fixed-purpose events: 3
- [ 0.053823] ... event mask: 000000070000000f
- [ 0.053895] Hierarchical SRCU implementation.
- [ 0.055986] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
- [ 0.056000] smp: Bringing up secondary CPUs ...
- [ 0.056000] smp: Brought up 1 node, 1 CPU
- [ 0.056000] smpboot: Max logical packages: 1
- [ 0.056000] smpboot: Total of 1 processors activated (4399.64 BogoMIPS)
- [ 0.056363] devtmpfs: initialized
- [ 0.056492] x86/mm: Memory block size: 128MB
- [ 0.057069] evm: security.selinux
- [ 0.057071] evm: security.SMACK64
- [ 0.057072] evm: security.SMACK64EXEC
- [ 0.057073] evm: security.SMACK64TRANSMUTE
- [ 0.057075] evm: security.SMACK64MMAP
- [ 0.057076] evm: security.apparmor
- [ 0.057077] evm: security.ima
- [ 0.057079] evm: security.capability
- [ 0.057204] PM: Registering ACPI NVS region [mem 0x79a27000-0x79e57fff] (4395008 bytes)
- [ 0.057477] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.057487] futex hash table entries: 256 (order: 2, 16384 bytes)
- [ 0.057563] pinctrl core: initialized pinctrl subsystem
- [ 0.057761] RTC time: 22:13:23, date: 09/20/18
- [ 0.057977] NET: Registered protocol family 16
- [ 0.058175] audit: initializing netlink subsys (disabled)
- [ 0.058476] cpuidle: using governor ladder
- [ 0.058479] cpuidle: using governor menu
- [ 0.058578] ACPI: bus type PCI registered
- [ 0.058581] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.058646] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
- [ 0.058652] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
- [ 0.058688] PCI: Using configuration type 1 for base access
- [ 0.061750] audit: type=2000 audit(1537481603.056:1): state=initialized audit_enabled=0 res=1
- [ 0.061891] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.061894] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.062303] ACPI: Added _OSI(Module Device)
- [ 0.062306] ACPI: Added _OSI(Processor Device)
- [ 0.062308] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.062310] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.062312] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.062315] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.219316] ACPI: Interpreter enabled
- [ 0.219352] ACPI: (supports S0 S4 S5)
- [ 0.219355] ACPI: Using PIC for interrupt routing
- [ 0.219428] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.220407] ACPI: Enabled 5 GPEs in block 00 to 3F
- [ 0.319963] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
- [ 0.319975] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.321903] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.322026] PCI host bridge to bus 0000:ff
- [ 0.322032] pci_bus 0000:ff: root bus resource [bus ff]
- [ 0.322060] pci 0000:ff:0b.0: [8086:6f81] type 00 class 0x088000
- [ 0.322193] pci 0000:ff:0b.1: [8086:6f36] type 00 class 0x110100
- [ 0.322307] pci 0000:ff:0b.2: [8086:6f37] type 00 class 0x110100
- [ 0.322417] pci 0000:ff:0b.3: [8086:6f76] type 00 class 0x088000
- [ 0.322533] pci 0000:ff:0c.0: [8086:6fe0] type 00 class 0x088000
- [ 0.322644] pci 0000:ff:0c.1: [8086:6fe1] type 00 class 0x088000
- [ 0.322752] pci 0000:ff:0c.2: [8086:6fe2] type 00 class 0x088000
- [ 0.322859] pci 0000:ff:0c.3: [8086:6fe3] type 00 class 0x088000
- [ 0.322976] pci 0000:ff:0f.0: [8086:6ff8] type 00 class 0x088000
- [ 0.323086] pci 0000:ff:0f.4: [8086:6ffc] type 00 class 0x088000
- [ 0.323193] pci 0000:ff:0f.5: [8086:6ffd] type 00 class 0x088000
- [ 0.323304] pci 0000:ff:0f.6: [8086:6ffe] type 00 class 0x088000
- [ 0.323416] pci 0000:ff:10.0: [8086:6f1d] type 00 class 0x088000
- [ 0.323525] pci 0000:ff:10.1: [8086:6f34] type 00 class 0x110100
- [ 0.323636] pci 0000:ff:10.5: [8086:6f1e] type 00 class 0x088000
- [ 0.323746] pci 0000:ff:10.6: [8086:6f7d] type 00 class 0x110100
- [ 0.323853] pci 0000:ff:10.7: [8086:6f1f] type 00 class 0x088000
- [ 0.323964] pci 0000:ff:12.0: [8086:6fa0] type 00 class 0x088000
- [ 0.324045] pci 0000:ff:12.1: [8086:6f30] type 00 class 0x110100
- [ 0.324168] pci 0000:ff:13.0: [8086:6fa8] type 00 class 0x088000
- [ 0.324288] pci 0000:ff:13.1: [8086:6f71] type 00 class 0x088000
- [ 0.324406] pci 0000:ff:13.2: [8086:6faa] type 00 class 0x088000
- [ 0.324523] pci 0000:ff:13.3: [8086:6fab] type 00 class 0x088000
- [ 0.324643] pci 0000:ff:13.4: [8086:6fac] type 00 class 0x088000
- [ 0.324761] pci 0000:ff:13.5: [8086:6fad] type 00 class 0x088000
- [ 0.324877] pci 0000:ff:13.6: [8086:6fae] type 00 class 0x088000
- [ 0.324993] pci 0000:ff:13.7: [8086:6faf] type 00 class 0x088000
- [ 0.325104] pci 0000:ff:14.0: [8086:6fb0] type 00 class 0x088000
- [ 0.325224] pci 0000:ff:14.1: [8086:6fb1] type 00 class 0x088000
- [ 0.325346] pci 0000:ff:14.2: [8086:6fb2] type 00 class 0x088000
- [ 0.325464] pci 0000:ff:14.3: [8086:6fb3] type 00 class 0x088000
- [ 0.325581] pci 0000:ff:14.4: [8086:6fbc] type 00 class 0x088000
- [ 0.325693] pci 0000:ff:14.5: [8086:6fbd] type 00 class 0x088000
- [ 0.325803] pci 0000:ff:14.6: [8086:6fbe] type 00 class 0x088000
- [ 0.325913] pci 0000:ff:14.7: [8086:6fbf] type 00 class 0x088000
- [ 0.326027] pci 0000:ff:15.0: [8086:6fb4] type 00 class 0x088000
- [ 0.326148] pci 0000:ff:15.1: [8086:6fb5] type 00 class 0x088000
- [ 0.326267] pci 0000:ff:15.2: [8086:6fb6] type 00 class 0x088000
- [ 0.326385] pci 0000:ff:15.3: [8086:6fb7] type 00 class 0x088000
- [ 0.326526] pci 0000:ff:1e.0: [8086:6f98] type 00 class 0x088000
- [ 0.326635] pci 0000:ff:1e.1: [8086:6f99] type 00 class 0x088000
- [ 0.326750] pci 0000:ff:1e.2: [8086:6f9a] type 00 class 0x088000
- [ 0.326860] pci 0000:ff:1e.3: [8086:6fc0] type 00 class 0x088000
- [ 0.326941] pci 0000:ff:1e.4: [8086:6f9c] type 00 class 0x088000
- [ 0.327059] pci 0000:ff:1f.0: [8086:6f88] type 00 class 0x088000
- [ 0.327171] pci 0000:ff:1f.2: [8086:6f8a] type 00 class 0x088000
- [ 0.329861] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x2 ignored.
- [ 0.329862] ACPI: Unable to map lapic to logical cpu number
- [ 0.331143] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 2/0x4 ignored.
- [ 0.331144] ACPI: Unable to map lapic to logical cpu number
- [ 0.332446] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 3/0x6 ignored.
- [ 0.332448] ACPI: Unable to map lapic to logical cpu number
- [ 0.333728] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 4/0x1 ignored.
- [ 0.333729] ACPI: Unable to map lapic to logical cpu number
- [ 0.335008] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 5/0x3 ignored.
- [ 0.335009] ACPI: Unable to map lapic to logical cpu number
- [ 0.336311] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 6/0x5 ignored.
- [ 0.336312] ACPI: Unable to map lapic to logical cpu number
- [ 0.337590] APIC: NR_CPUS/possible_cpus limit of 1 reached. Processor 7/0x7 ignored.
- [ 0.337591] ACPI: Unable to map lapic to logical cpu number
- [ 0.347574] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
- [ 0.347586] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
- [ 0.349465] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
- [ 0.350433] PCI host bridge to bus 0000:00
- [ 0.350441] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
- [ 0.350445] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
- [ 0.350449] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
- [ 0.350453] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
- [ 0.350458] pci_bus 0000:00: root bus resource [bus 00-fe]
- ...
- # If you change this file, run 'update-grub' afterwards to update
- # /boot/grub/grub.cfg.
- # For full documentation of the options in this file, see:
- # info -f grub -n 'Simple configuration'
- GRUB_DEFAULT=0
- GRUB_TIMEOUT_STYLE=hidden
- GRUB_TIMEOUT=10
- GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
- GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
- GRUB_CMDLINE_LINUX=""
- # Uncomment to enable BadRAM filtering, modify to suit your needs
- # This works with Linux (no patch required) and with any kernel that obtains
- # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
- #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"
- # Uncomment to disable graphical terminal (grub-pc only)
- #GRUB_TERMINAL=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via
- VBE
- # you can see them in real GRUB with the command `vbeinfo'
- #GRUB_GFXMODE=640x480
- # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to
- Linux
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- #GRUB_DISABLE_RECOVERY="true"
- # Uncomment to get a beep at grub start
- #GRUB_INIT_TUNE="480 440 1"
Add Comment
Please, Sign In to add comment