API tools faq
paste
Advertisement
SnarlingFox

WSQ50 NVMEM testing dmesg

SnarlingFox
Nov 28th, 2023
51
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 22.19 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 6.1.62 (build@OpenWrt-Build) (arm-openwrt-linux-muslgnueabi-gcc (OpenWrt GCC 12.3.0 r24437-80dc1615fc) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Fri Nov 24 22:01:00 2023
  3. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  4. [ 0.000000] CPU: div instructions available: patching division code
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  6. [ 0.000000] OF: fdt: Machine model: Zyxel WSQ50
  7. [ 0.000000] Memory policy: Data cache writealloc
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] Normal [mem 0x0000000080000000-0x000000009fffffff]
  10. [ 0.000000] HighMem empty
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000080000000-0x0000000087dfffff]
  14. [ 0.000000] node 0: [mem 0x0000000087e00000-0x0000000087ffffff]
  15. [ 0.000000] node 0: [mem 0x0000000088000000-0x000000009fffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000009fffffff]
  17. [ 0.000000] percpu: Embedded 12 pages/cpu s17108 r8192 d23852 u49152
  18. [ 0.000000] pcpu-alloc: s17108 r8192 d23852 u49152 alloc=12*4096
  19. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  20. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
  21. [ 0.000000] Kernel command line: clk_ignore_unused fstools_ignore_partname=1
  22. [ 0.000000] Unknown kernel command line parameters "fstools_ignore_partname=1", will be passed to user space.
  23. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  24. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  25. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  26. [ 0.000000] Memory: 488416K/524288K available (6860K kernel code, 616K rwdata, 1848K rodata, 18432K init, 243K bss, 35872K reserved, 0K cma-reserved, 0K highmem)
  27. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  28. [ 0.000000] rcu: Hierarchical RCU implementation.
  29. [ 0.000000] Tracing variant of Tasks RCU enabled.
  30. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  31. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  32. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  33. [ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
  34. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
  35. [ 0.000004] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
  36. [ 0.000020] Switching to timer-based delay loop, resolution 20ns
  37. [ 0.000285] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
  38. [ 0.000308] CPU: Testing write buffer coherency: ok
  39. [ 0.000365] pid_max: default: 32768 minimum: 301
  40. [ 0.001228] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  41. [ 0.001248] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  42. [ 0.003254] qcom_scm: convention: smc legacy
  43. [ 0.004309] cblist_init_generic: Setting adjustable number of callback queues.
  44. [ 0.004321] cblist_init_generic: Setting shift to 2 and lim to 1.
  45. [ 0.004508] Setting up static identity map for 0x80300000 - 0x8030003c
  46. [ 0.004664] rcu: Hierarchical SRCU implementation.
  47. [ 0.004673] rcu: Max phase no-delay instances is 1000.
  48. [ 0.005329] smp: Bringing up secondary CPUs ...
  49. [ 0.008772] smp: Brought up 1 node, 4 CPUs
  50. [ 0.008795] SMP: Total of 4 processors activated (384.00 BogoMIPS).
  51. [ 0.008806] CPU: All CPU(s) started in SVC mode.
  52. [ 0.014985] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  53. [ 0.015136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  54. [ 0.015165] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  55. [ 0.015507] pinctrl core: initialized pinctrl subsystem
  56. [ 0.017559] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  57. [ 0.017959] DMA: preallocated 256 KiB pool for atomic coherent allocations
  58. [ 0.019254] thermal_sys: Registered thermal governor 'step_wise'
  59. [ 0.019621] cpuidle: using governor ladder
  60. [ 0.019668] cpuidle: using governor menu
  61. [ 0.043646] cryptd: max_cpu_qlen set to 1000
  62. [ 0.045399] usbcore: registered new interface driver usbfs
  63. [ 0.045460] usbcore: registered new interface driver hub
  64. [ 0.045516] usbcore: registered new device driver usb
  65. [ 0.045569] pps_core: LinuxPPS API ver. 1 registered
  66. [ 0.045576] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  67. [ 0.045600] PTP clock support registered
  68. [ 0.047926] clocksource: Switched to clocksource arch_sys_counter
  69. [ 0.049541] NET: Registered PF_INET protocol family
  70. [ 0.049806] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  71. [ 0.051641] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  72. [ 0.051681] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  73. [ 0.051707] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
  74. [ 0.051766] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
  75. [ 0.051918] TCP: Hash tables configured (established 4096 bind 4096)
  76. [ 0.052071] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  77. [ 0.052114] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  78. [ 0.052456] NET: Registered PF_UNIX/PF_LOCAL protocol family
  79. [ 0.052512] PCI: CLS 0 bytes, default 64
  80. [ 0.053711] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  81. [ 0.060657] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  82. [ 0.060678] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  83. [ 0.194801] qcom-pcie 40000000.pci: host bridge /soc/pci@40000000 ranges:
  84. [ 0.194873] qcom-pcie 40000000.pci: IO 0x0040200000..0x00402fffff -> 0x0000000000
  85. [ 0.194906] qcom-pcie 40000000.pci: MEM 0x0040300000..0x0040ffffff -> 0x0040300000
  86. [ 0.369814] qcom-pcie 40000000.pci: iATU unroll: disabled
  87. [ 0.369834] qcom-pcie 40000000.pci: iATU regions: 32 ob, 8 ib, align 4K, limit 4G
  88. [ 0.469951] qcom-pcie 40000000.pci: PCIe Gen.2 x1 link up
  89. [ 0.470139] qcom-pcie 40000000.pci: PCI host bridge to bus 0000:00
  90. [ 0.470155] pci_bus 0000:00: root bus resource [bus 00-ff]
  91. [ 0.470173] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff]
  92. [ 0.470187] pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff]
  93. [ 0.470237] pci 0000:00:00.0: [17cb:1001] type 01 class 0x060400
  94. [ 0.470264] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
  95. [ 0.470331] pci 0000:00:00.0: PME# supported from D0 D3hot
  96. [ 0.471891] PCI: bus0: Fast back to back transfers disabled
  97. [ 0.472170] pci 0000:01:00.0: [168c:0046] type 00 class 0x028000
  98. [ 0.472299] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
  99. [ 0.472873] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
  100. [ 0.473529] PCI: bus1: Fast back to back transfers disabled
  101. [ 0.473571] pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
  102. [ 0.473589] pci 0000:00:00.0: BAR 0: assigned [mem 0x40300000-0x40300fff]
  103. [ 0.473609] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit]
  104. [ 0.473678] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  105. [ 0.473694] pci 0000:00:00.0: bridge window [mem 0x40400000-0x405fffff]
  106. [ 0.476805] pcieport 0000:00:00.0: AER: enabled with IRQ 31
  107. [ 0.479297] bam-dma-engine 8e04000.dma-controller: num-channels unspecified in dt
  108. [ 0.479317] bam-dma-engine 8e04000.dma-controller: num-ees unspecified in dt
  109. [ 0.480048] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
  110. [ 0.480152] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
  111. [ 0.480243] tcsr 1953000.ess_tcsr: setting ess interface select = 0
  112. [ 0.480329] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
  113. [ 0.480647] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  114. [ 0.481255] ipq4019-pinctrl 1000000.pinctrl: invalid group "gpio16" for function "blsp_uart1"
  115. [ 0.481278] ipq4019-pinctrl 1000000.pinctrl: invalid group "gpio17" for function "blsp_uart1"
  116. [ 0.481329] msm_serial 78af000.serial: msm_serial: detected port #0
  117. [ 0.481367] msm_serial 78af000.serial: uartclk = 1843200
  118. [ 0.481481] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 34, base_baud = 115200) is a MSM
  119. [ 0.481515] msm_serial: console setup on port #0
  120. [ 1.228156] printk: console [ttyMSM0] enabled
  121. [ 1.233236] ipq4019-pinctrl 1000000.pinctrl: invalid function blsp_uart2 in map table
  122. [ 1.237085] ipq4019-pinctrl 1000000.pinctrl: invalid function blsp_uart2 in map table
  123. [ 1.244935] ipq4019-pinctrl 1000000.pinctrl: invalid function blsp_uart2 in map table
  124. [ 1.252738] ipq4019-pinctrl 1000000.pinctrl: invalid function blsp_uart2 in map table
  125. [ 1.260582] msm_serial 78b0000.serial: msm_serial: detected port #1
  126. [ 1.268370] msm_serial 78b0000.serial: uartclk = 1843200
  127. [ 1.274509] 78b0000.serial: ttyMSM1 at MMIO 0x78b0000 (irq = 35, base_baud = 115200) is a MSM
  128. [ 1.280398] msm_serial: driver initialized
  129. [ 1.295066] loop: module loaded
  130. [ 1.296143] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  131. [ 1.298178] spi-nor spi0.0: w25q32 (4096 Kbytes)
  132. [ 1.304427] 7 fixed-partitions partitions found on MTD device spi0.0
  133. [ 1.308962] Creating 7 MTD partitions on "spi0.0":
  134. [ 1.315256] 0x000000060000-0x0000000c0000 : "0:QSEE"
  135. [ 1.320571] 0x0000000e0000-0x000000160000 : "u-boot"
  136. [ 1.325545] 0x000000160000-0x000000170000 : "u-boot-env"
  137. [ 1.330575] 0x000000170000-0x000000180000 : "0:ART"
  138. [ 1.335902] OF: Bad cell count for /soc/spi@78b5000/flash@0/partitions
  139. [ 1.340137] 0x000000180000-0x000000190000 : "dualflag"
  140. [ 1.347165] 0x000000190000-0x0000001a0000 : "CRT"
  141. [ 1.352243] 0x0000001a0000-0x000000400000 : "reserved"
  142. [ 1.496942] i2c_dev: i2c /dev entries driver
  143. [ 1.497120] i2c_qup 78b7000.i2c: using default clock-frequency 100000
  144. [ 1.503243] sdhci: Secure Digital Host Controller Interface driver
  145. [ 1.506631] sdhci: Copyright(c) Pierre Ossman
  146. [ 1.512744] sdhci-pltfm: SDHCI platform and OF driver helper
  147. [ 1.541297] lp5562 0-0030: internal clock used
  148. [ 1.546376] NET: Registered PF_INET6 protocol family
  149. [ 1.547950] mmc0: SDHCI controller on 7824900.mmc [7824900.mmc] using ADMA 64-bit
  150. [ 1.548275] Segment Routing with IPv6
  151. [ 1.557936] In-situ OAM (IOAM) with IPv6
  152. [ 1.561590] NET: Registered PF_PACKET protocol family
  153. [ 1.565773] 8021q: 802.1Q VLAN Support v1.8
  154. [ 1.570577] Registering SWP/SWPB emulation handler
  155. [ 1.622028] qca8k-ipq4019 c000000.switch: configuring for fixed/internal link mode
  156. [ 1.622307] qca8k-ipq4019 c000000.switch: Link is Up - 1Gbps/Full - flow control rx/tx
  157. [ 1.671410] mmc0: new HS200 MMC card at address 0001
  158. [ 1.672690] mmcblk0: mmc0:0001 004G60 3.69 GiB
  159. [ 1.677418] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
  160. [ 1.681546] mmcblk0boot0: mmc0:0001 004G60 2.00 MiB
  161. [ 1.685962] mmcblk0boot1: mmc0:0001 004G60 2.00 MiB
  162. [ 1.690491] mmcblk0rpmb: mmc0:0001 004G60 512 KiB, chardev (247:0)
  163. [ 1.710731] qca8k-ipq4019 c000000.switch lan3 (uninitialized): PHY [90000.mdio-1:01] driver [Qualcomm QCA8075] (irq=POLL)
  164. [ 1.790844] qca8k-ipq4019 c000000.switch lan2 (uninitialized): PHY [90000.mdio-1:02] driver [Qualcomm QCA8075] (irq=POLL)
  165. [ 1.870748] qca8k-ipq4019 c000000.switch lan1 (uninitialized): PHY [90000.mdio-1:03] driver [Qualcomm QCA8075] (irq=POLL)
  166. [ 1.952228] qca8k-ipq4019 c000000.switch wan (uninitialized): PHY [90000.mdio-1:04] driver [Qualcomm QCA8075] (irq=POLL)
  167. [ 1.953384] device eth0 entered promiscuous mode
  168. [ 1.962322] DSA: tree 0 setup
  169. [ 1.967746] clk: Not disabling unused clocks
  170. [ 2.003367] Freeing unused kernel image (initmem) memory: 18432K
  171. [ 2.018168] Run /init as init process
  172. [ 2.018202] with arguments:
  173. [ 2.018208] /init
  174. [ 2.018214] with environment:
  175. [ 2.018219] HOME=/
  176. [ 2.018225] TERM=linux
  177. [ 2.018231] fstools_ignore_partname=1
  178. [ 2.615667] init: Console is alive
  179. [ 2.616110] init: - watchdog -
  180. [ 2.632997] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  181. [ 3.038307] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  182. [ 3.038437] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  183. [ 3.042939] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
  184. [ 3.050462] xhci-hcd xhci-hcd.0.auto: irq 65, io mem 0x08a00000
  185. [ 3.059951] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  186. [ 3.065557] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  187. [ 3.071143] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  188. [ 3.079443] hub 1-0:1.0: USB hub found
  189. [ 3.085291] hub 1-0:1.0: 1 port detected
  190. [ 3.089532] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  191. [ 3.093679] hub 2-0:1.0: USB hub found
  192. [ 3.105964] hub 2-0:1.0: 1 port detected
  193. [ 3.106589] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  194. [ 3.109040] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
  195. [ 3.114480] xhci-hcd xhci-hcd.1.auto: USB3 root hub has no ports
  196. [ 3.121856] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
  197. [ 3.128156] xhci-hcd xhci-hcd.1.auto: irq 66, io mem 0x06000000
  198. [ 3.138234] hub 3-0:1.0: USB hub found
  199. [ 3.143127] hub 3-0:1.0: 1 port detected
  200. [ 3.150018] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  201. [ 3.153613] init: - preinit -
  202. [ 3.387957] usb 1-1: new full-speed USB device number 2 using xhci-hcd
  203. [ 4.867925] random: crng init done
  204. [ 5.211325] ipqess-edma c080000.ethernet eth0: configuring for fixed/internal link mode
  205. [ 5.212055] qca8k-ipq4019 c000000.switch lan1: configuring for phy/psgmii link mode
  206. [ 5.218236] qca8k-ipq4019 c000000.switch: PSGMII calibration!
  207. [ 5.225893] ipqess-edma c080000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  208. [ 6.147409] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  209. [ 8.321946] procd: - early -
  210. [ 8.322214] procd: - watchdog -
  211. [ 8.877079] procd: - watchdog -
  212. [ 8.877493] procd: - ubus -
  213. [ 9.033433] procd: - init -
  214. [ 9.388780] kmodloader: loading kernel modules from /etc/modules.d/*
  215. [ 9.413382] hid: raw HID events driver (C) Jiri Kosina
  216. [ 9.436910] Bluetooth: Core ver 2.22
  217. [ 9.437077] NET: Registered PF_BLUETOOTH protocol family
  218. [ 9.439606] Bluetooth: HCI device and connection manager initialized
  219. [ 9.444892] Bluetooth: HCI socket layer initialized
  220. [ 9.451230] Bluetooth: L2CAP socket layer initialized
  221. [ 9.455862] Bluetooth: SCO socket layer initialized
  222. [ 9.462786] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  223. [ 9.465711] Bluetooth: BNEP filters: protocol multicast
  224. [ 9.471300] Bluetooth: BNEP socket layer initialized
  225. [ 9.483795] usbcore: registered new interface driver btusb
  226. [ 9.484943] Loading modules backported from Linux version v6.5-0-g2dde18cd1d8f
  227. [ 9.488244] Backport generated by backports.git v5.15.92-1-56-g5fb2ccb6b9e8
  228. [ 9.495471] Bluetooth: hci0: CSR: Setting up dongle with HCI ver=7 rev=2918; LMP ver=7 subver=2918; manufacturer=10
  229. [ 9.509868] Bluetooth: HCI UART driver ver 2.3
  230. [ 9.512670] Bluetooth: HCI UART protocol H4 registered
  231. [ 9.517179] Bluetooth: HCI UART protocol BCSP registered
  232. [ 9.522433] Bluetooth: HCI UART protocol ATH3K registered
  233. [ 9.529661] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  234. [ 9.533086] Bluetooth: HIDP socket layer initialized
  235. [ 9.550805] Bluetooth: RFCOMM TTY layer initialized
  236. [ 9.550879] Bluetooth: RFCOMM socket layer initialized
  237. [ 9.554542] Bluetooth: RFCOMM ver 1.11
  238. [ 9.561910] usbcore: registered new interface driver ath3k
  239. [ 9.674566] PPP generic driver version 2.4.2
  240. [ 9.675893] NET: Registered PF_PPPOX protocol family
  241. [ 9.706575] ath10k 6.4 driver, optimized for CT firmware, probing pci device: 0x46.
  242. [ 9.707576] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
  243. [ 9.713738] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
  244. [ 10.252406] urngd: v1.0.2 started.
  245. [ 10.539303] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
  246. [ 10.539376] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  247. [ 10.552538] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9984-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 7ea63dc5
  248. [ 12.880232] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:6 crc32 cf2b07cf
  249. [ 16.406715] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  250. [ 16.406787] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
  251. [ 16.490020] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  252. [ 16.490848] ath10k_pci 0000:01:00.0: wmi print 'free: 84920 iram: 13156 sram: 11224'
  253. [ 16.780640] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
  254. [ 16.862702] ath: EEPROM regdomain: 0x0
  255. [ 16.862730] ath: EEPROM indicates default country code should be used
  256. [ 16.862737] ath: doing EEPROM country->regdmn map search
  257. [ 16.862745] ath: country maps to regdmn code: 0x3a
  258. [ 16.862754] ath: Country alpha2 being used: US
  259. [ 16.862762] ath: Regpair used: 0x3a
  260. [ 17.673574] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
  261. [ 17.673645] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  262. [ 17.685616] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
  263. [ 17.743131] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 17d204f9
  264. [ 19.035942] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  265. [ 19.036021] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
  266. [ 19.083777] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  267. [ 19.084733] ath10k_ahb a000000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
  268. [ 19.230460] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
  269. [ 19.347254] ath: EEPROM regdomain: 0x0
  270. [ 19.347283] ath: EEPROM indicates default country code should be used
  271. [ 19.347292] ath: doing EEPROM country->regdmn map search
  272. [ 19.347300] ath: country maps to regdmn code: 0x3a
  273. [ 19.347309] ath: Country alpha2 being used: US
  274. [ 19.347317] ath: Regpair used: 0x3a
  275. [ 20.162383] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
  276. [ 20.162456] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
  277. [ 20.174398] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-13-5ae337bb1 api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT,wmi-bcn-rc-CT crc32 6b2b5c5b
  278. [ 20.231607] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:21 crc32 17d204f9
  279. [ 21.524763] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
  280. [ 21.524837] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
  281. [ 21.571965] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
  282. [ 21.572921] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
  283. [ 21.710701] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-nvmem max-sta 32 raw 0 hwcrypto 1
  284. [ 21.822735] ath: EEPROM regdomain: 0x0
  285. [ 21.822765] ath: EEPROM indicates default country code should be used
  286. [ 21.822774] ath: doing EEPROM country->regdmn map search
  287. [ 21.822782] ath: country maps to regdmn code: 0x3a
  288. [ 21.822790] ath: Country alpha2 being used: US
  289. [ 21.822798] ath: Regpair used: 0x3a
  290. [ 21.830877] kmodloader: done loading kernel modules from /etc/modules.d/*
  291. [ 52.928842] ipqess-edma c080000.ethernet eth0: Link is Down
  292. [ 52.937553] ipqess-edma c080000.ethernet eth0: configuring for fixed/internal link mode
  293. [ 52.937968] ipqess-edma c080000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  294. [ 52.944462] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  295. [ 52.960283] qca8k-ipq4019 c000000.switch lan1: configuring for phy/psgmii link mode
  296. [ 52.962881] br-lan: port 1(lan1) entered blocking state
  297. [ 52.966806] br-lan: port 1(lan1) entered disabled state
  298. [ 52.972752] device lan1 entered promiscuous mode
  299. [ 53.003415] qca8k-ipq4019 c000000.switch lan2: configuring for phy/psgmii link mode
  300. [ 53.005639] br-lan: port 2(lan2) entered blocking state
  301. [ 53.010101] br-lan: port 2(lan2) entered disabled state
  302. [ 53.015870] device lan2 entered promiscuous mode
  303. [ 53.035395] qca8k-ipq4019 c000000.switch lan3: configuring for phy/psgmii link mode
  304. [ 53.038357] br-lan: port 3(lan3) entered blocking state
  305. [ 53.041965] br-lan: port 3(lan3) entered disabled state
  306. [ 53.047973] device lan3 entered promiscuous mode
  307. [ 53.070788] qca8k-ipq4019 c000000.switch wan: configuring for phy/psgmii link mode
  308. [ 56.079006] qca8k-ipq4019 c000000.switch lan1: Link is Up - 1Gbps/Full - flow control rx
  309. [ 56.079103] br-lan: port 1(lan1) entered blocking state
  310. [ 56.086196] br-lan: port 1(lan1) entered forwarding state
  311. [ 56.091887] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  312. [ 56.160624] qca8k-ipq4019 c000000.switch wan: Link is Up - 1Gbps/Full - flow control off
  313. [ 56.160708] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!