Advertisement
bobstro

PrusaSlicer Prusa i3 Mk3 Print Profiles

Jul 3rd, 2020 (edited)
6,537
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.43 KB | None | 0 0
  1. [print:*MK3 Baseline (RLG 20200508)*]
  2. avoid_crossing_perimeters = 0
  3. bottom_fill_pattern = rectilinear
  4. bottom_solid_min_thickness = 1
  5. bridge_acceleration = 1000
  6. bridge_angle = 0
  7. bridge_flow_ratio = 0.95
  8. bridge_speed = 30
  9. brim_width = 0
  10. clip_multipart_objects = 1
  11. compatible_printers =
  12. compatible_printers_condition = printer_model=~/MK3/
  13. complete_objects = 0
  14. default_acceleration = 4000
  15. dont_support_bridges = 1
  16. draft_shield = 0
  17. elefant_foot_compensation = 0
  18. ensure_vertical_shell_thickness = 1
  19. external_perimeter_extrusion_width = 0
  20. external_perimeter_speed = 20
  21. external_perimeters_first = 0
  22. extra_perimeters = 1
  23. extruder_clearance_height = 20
  24. extruder_clearance_radius = 20
  25. extrusion_width = 0
  26. fill_angle = 45
  27. fill_density = 15%
  28. fill_pattern = grid
  29. first_layer_acceleration = 1000
  30. first_layer_extrusion_width = 0
  31. first_layer_height = 0.2
  32. first_layer_speed = 20
  33. gap_fill_speed = 40
  34. gcode_comments = 1
  35. gcode_label_objects = 1
  36. infill_acceleration = 1500
  37. infill_every_layers = 1
  38. infill_extruder = 1
  39. infill_extrusion_width = 0
  40. infill_first = 0
  41. infill_only_where_needed = 0
  42. infill_overlap = 25%
  43. infill_speed = 200
  44. inherits =
  45. interface_shells = 0
  46. layer_height = 0.2
  47. max_print_speed = 200
  48. max_volumetric_speed = 0
  49. min_skirt_length = 4
  50. notes = BASELINE
  51. only_retract_when_crossing_perimeters = 1
  52. ooze_prevention = 0
  53. output_filename_format = [input_filename_base] [notes] [filament_type] [layer_height]X[nozzle_diameter] [first_layer_temperature]-[temperature] [first_layer_bed_temperature]-[bed_temperature] [print_time].gcode
  54. overhangs = 1
  55. perimeter_acceleration = 800
  56. perimeter_extruder = 1
  57. perimeter_extrusion_width = 0
  58. perimeter_speed = 60
  59. perimeters = 3
  60. post_process =
  61. print_settings_id =
  62. raft_layers = 0
  63. resolution = 0
  64. single_extruder_multi_material_priming = 1
  65. skirt_distance = 3
  66. skirt_height = 2
  67. skirts = 0
  68. slice_closing_radius = 0.049
  69. small_perimeter_speed = 25
  70. solid_infill_below_area = 0
  71. solid_infill_every_layers = 0
  72. solid_infill_extruder = 1
  73. solid_infill_extrusion_width = 0
  74. solid_infill_speed = 200
  75. spiral_vase = 0
  76. standby_temperature_delta = -5
  77. support_material = 1
  78. support_material_angle = 0
  79. support_material_auto = 0
  80. support_material_buildplate_only = 0
  81. support_material_contact_distance = 0.25
  82. support_material_enforce_layers = 0
  83. support_material_extruder = 0
  84. support_material_extrusion_width = 0
  85. support_material_interface_contact_loops = 0
  86. support_material_interface_extruder = 0
  87. support_material_interface_layers = 4
  88. support_material_interface_spacing = 0.2
  89. support_material_interface_speed = 100%
  90. support_material_pattern = rectilinear
  91. support_material_spacing = 3
  92. support_material_speed = 50
  93. support_material_synchronize_layers = 0
  94. support_material_threshold = 45
  95. support_material_with_sheath = 0
  96. support_material_xy_spacing = 75%
  97. thin_walls = 1
  98. threads = 4
  99. top_fill_pattern = rectilinear
  100. top_infill_extrusion_width = 0
  101. top_solid_infill_speed = 20
  102. top_solid_min_thickness = 1
  103. travel_speed = 200
  104. wipe_tower = 0
  105. wipe_tower_bridging = 10
  106. wipe_tower_no_sparse_layers = 0
  107. wipe_tower_rotation_angle = 0
  108. wipe_tower_width = 0
  109. wipe_tower_x = 0
  110. wipe_tower_y = 0
  111. xy_size_compensation = 0
  112.  
  113. [print:*MK3 SPEED baseline (RLG 20200508)*]
  114. bottom_solid_min_thickness = 1.0
  115. default_acceleration = 4000
  116. ensure_vertical_shell_thickness = 0
  117. external_perimeter_speed = 50
  118. first_layer_acceleration = 1000
  119. first_layer_speed = 30
  120. gap_fill_speed = 40
  121. infill_acceleration = 1500
  122. infill_only_where_needed = 1
  123. infill_speed = 200
  124. inherits = *MK3 Baseline (RLG 20200508)*
  125. max_print_speed = 150
  126. notes = SPEED
  127. perimeter_acceleration = 1000
  128. perimeter_speed = 80
  129. perimeters = 2
  130. print_settings_id = SWX1 SPEED baseline (RLG 20200515)
  131. seam_position = nearest
  132. small_perimeter_speed = 25
  133. solid_infill_speed = 200
  134. support_material_speed = 50
  135. top_solid_infill_speed = 40
  136. top_solid_min_thickness = 1.0
  137. travel_speed = 200
  138.  
  139. [print:MK3 SPEED 0.05mm layers for 0.15mm+ nozzle (RLG 20200508)]
  140. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.062
  141. inherits = *MK3 SPEED baseline (RLG 20200508)*
  142. layer_height = 0.05
  143. print_settings_id = MK3 SPEED 0.05mm layers for 0.20mm+ nozzle
  144.  
  145. [print:MK3 SPEED 0.08mm layers for 0.15mm+ nozzle (RLG 20200508)]
  146. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.1
  147. inherits = *MK3 SPEED baseline (RLG 20200508)*
  148. layer_height = 0.08
  149. print_settings_id = MK3 SPEED 0.08mm layers for 0.20mm+ nozzle
  150.  
  151. [print:MK3 SPEED 0.10mm layers for 0.15mm+ nozzle (RLG 20200508)]
  152. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.125
  153. inherits = *MK3 SPEED baseline (RLG 20200508)*
  154. layer_height = 0.1
  155. print_settings_id = MK3 SPEED 0.10mm layers for 0.20mm+ nozzle
  156.  
  157. [print:MK3 SPEED 0.12mm layers for 0.15mm+ nozzle (RLG 20200508)]
  158. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.15
  159. inherits = *MK3 SPEED baseline (RLG 20200508)*
  160. layer_height = 0.12
  161. print_settings_id = MK3 SPEED 0.12mm layers for 0.20mm+ nozzle
  162.  
  163. [print:MK3 SPEED 0.15mm layers for 0.20mm+ nozzle (RLG 20200508)]
  164. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.188
  165. inherits = *MK3 SPEED baseline (RLG 20200508)*
  166. layer_height = 0.15
  167. print_settings_id = MK3 SPEED 0.15mm layers for 0.20mm+ nozzle
  168.  
  169. [print:MK3 SPEED 0.16mm layers for 0.20mm+ nozzle (RLG 20200508)]
  170. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.188
  171. inherits = *MK3 SPEED baseline (RLG 20200508)*
  172. layer_height = 0.16
  173. print_settings_id = MK3 SPEED 0.16mm layers for 0.20mm+ nozzle
  174.  
  175. [print:MK3 SPEED 0.20mm layers for 0.25mm+ nozzle (RLG 20200508)]
  176. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.25
  177. inherits = *MK3 SPEED baseline (RLG 20200508)*
  178. layer_height = 0.20
  179. print_settings_id = MK3 SPEED 0.20mm layers for 0.25mm+ nozzle
  180.  
  181. [print:MK3 SPEED 0.24mm layers for 0.30mm+ nozzle (RLG 20200508)]
  182. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=.3
  183. inherits = *MK3 SPEED baseline (RLG 20200508)*
  184. print_settings_id = MK3 SPEED 0.24mm layers for 0.25mm+ nozzle
  185. layer_height = 0.24
  186.  
  187. [print:MK3 SPEED 0.32mm layers for 0.40mm+ nozzle (RLG 20200508)]
  188. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.4
  189. inherits = *MK3 SPEED baseline (RLG 20200508)*
  190. print_settings_id = MK3 SPEED 0.32mm layers for 0.40mm+ nozzle
  191. layer_height = 0.32
  192.  
  193. [print:MK3 SPEED 0.40mm layers for 0.50mm+ nozzle (RLG 20200508)]
  194. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.5
  195. inherits = *MK3 SPEED baseline (RLG 20200508)*
  196. layer_height = 0.4
  197. print_settings_id = MK3 SPEED 0.40mm layers for 1.00mm+ nozzle
  198.  
  199. [print:MK3 SPEED 0.48mm layers for 0.60mm+ nozzle (RLG 20200508)]
  200. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.6
  201. inherits = *MK3 SPEED baseline (RLG 20200508)*
  202. layer_height = 0.48
  203. print_settings_id = MK3 SPEED 0.48mm layers for 0.60mm+ nozzle
  204.  
  205. [print:MK3 SPEED 0.64mm layers for 0.80mm+ nozzle (RLG 20200508)]
  206. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.8
  207. inherits = *MK3 SPEED baseline (RLG 20200508)*
  208. layer_height = 0.64
  209. print_settings_id = MK3 SPEED 0.64mm layers for 0.80mm+ nozzle
  210.  
  211. [print:MK3 SPEED 0.80mm layers for 1.00mm+ nozzle (RLG 20200508)]
  212. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=1.0
  213. inherits = *MK3 SPEED baseline (RLG 20200508)*
  214. layer_height = 0.8
  215. print_settings_id = MK3 SPEED 0.80mm layers for 1.00mm+ nozzle
  216.  
  217. [print:*MK3 QUALITY baseline (RLG 20200508)*]
  218. avoid_crossing_perimeters = 1
  219. bottom_solid_min_thickness = 1.2
  220. default_acceleration = 4000
  221. ensure_vertical_shell_thickness = 1
  222. external_perimeter_speed = 20
  223. first_layer_acceleration = 1000
  224. first_layer_speed = 20
  225. gap_fill_speed = 40
  226. infill_acceleration = 1500
  227. infill_only_where_needed = 0
  228. infill_speed = 200
  229. inherits = *MK3 Baseline (RLG 20200508)*
  230. max_print_speed = 200
  231. notes = QUALITY
  232. overhangs = 1
  233. perimeter_acceleration = 800
  234. perimeter_speed = 60
  235. perimeters = 3
  236. print_settings_id = *MK3 QUALITY baseline (RLG 20200515)*
  237. seam_position = aligned
  238. small_perimeter_speed = 25
  239. solid_infill_speed = 200
  240. support_material_speed = 50
  241. top_solid_infill_speed = 20
  242. top_solid_min_thickness = 1.2
  243. travel_speed = 200
  244.  
  245. [print:MK3 QUALITY 0.05mm layers for 0.15mm+ nozzle (RLG 20200508)]
  246. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.15
  247. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  248. print_settings_id = MK3 QUALITY 0.05mm layers for 0.20mm+ nozzle
  249. layer_height = 0.05
  250.  
  251. [print:MK3 QUALITY 0.08mm layers for 0.15mm+ nozzle (RLG 20200508)]
  252. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.15
  253. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  254. layer_height = 0.08
  255. print_settings_id = MK3 QUALITY 0.08mm layers for 0.15mm+ nozzle
  256.  
  257. [print:MK3 QUALITY 0.10mm layers for 0.15mm+ nozzle (RLG 20200508)]
  258. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.125
  259. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  260. layer_height = 0.1
  261. print_settings_id = MK3 QUALITY 0.10mm layers for 0.15mm+ nozzle
  262.  
  263. [print:MK3 QUALITY 0.12mm layers for 0.15mm+ nozzle (RLG 20200508)]
  264. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.15
  265. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  266. layer_height = 0.12
  267. print_settings_id = MK3 QUALITY 0.12mm layers for 0.15mm+ nozzle
  268.  
  269. [print:MK3 QUALITY 0.15mm layers for 0.20mm+ nozzle (RLG 20200508)]
  270. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.2
  271. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  272. layer_height = 0.15
  273. print_settings_id = MK3 QUALITY 0.15mm layers for 0.20mm+ nozzle
  274.  
  275. [print:MK3 QUALITY 0.16mm layers for 0.20mm+ nozzle (RLG 20200508)]
  276. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.2
  277. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  278. layer_height = 0.16
  279. print_settings_id = MK3 QUALITY 0.16mm layers for 0.20mm+ nozzle
  280.  
  281. [print:MK3 QUALITY 0.20mm layers for 0.25mm+ nozzle (RLG 20200508)]
  282. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.25
  283. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  284. layer_height = 0.20
  285. print_settings_id = MK3 QUALITY 0.20mm layers for 0.25mm+ nozzle
  286.  
  287. [print:MK3 QUALITY 0.24mm layers for 0.30mm+ nozzle (RLG 20200508)]
  288. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=.3
  289. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  290. layer_height = 0.24
  291. print_settings_id = MK3 QUALITY 0.24mm layers for 0.30mm+ nozzle
  292.  
  293. [print:MK3 QUALITY 0.32mm layers for 0.40mm+ nozzle (RLG 20200508)]
  294. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.4
  295. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  296. layer_height = 0.32
  297. print_settings_id = MK3 QUALITY 0.32mm layers for 0.40mm+ nozzle
  298.  
  299. [print:MK3 QUALITY 0.40mm layers for 0.50mm+ nozzle (RLG 20200508)]
  300. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=1.0
  301. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  302. layer_height = 0.4
  303. print_settings_id = MK3 QUALITY 0.40mm layers for 0.50mm+ nozzle
  304.  
  305. [print:MK3 QUALITY 0.48mm layers for 0.60mm+ nozzle (RLG 20200508)]
  306. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.6
  307. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  308. layer_height = 0.48
  309. print_settings_id = MK3 QUALITY 0.48mm layers for 0.60mm+ nozzle
  310.  
  311. [print:MK3 QUALITY 0.64mm layers for 0.80mm+ nozzle (RLG 20200508)]
  312. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=0.8
  313. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  314. layer_height = 0.64
  315. print_settings_id = MK3 QUALITY 0.64mm layers for 0.80mm+ nozzle
  316.  
  317. [print:MK3 QUALITY 0.80mm layers for 1.00mm+ nozzle (RLG 20200508)]
  318. compatible_printers_condition = printer_model=~/MK3/ and nozzle_diameter[0]>=1.0
  319. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  320. layer_height = 0.8
  321. print_settings_id = MK3 QUALITY 0.80mm layers for 1.00mm+ nozzle
  322.  
  323. [print:MK3 MAX 0.40mm layers for 0.50mm+ nozzle (RLG 20200508)]
  324. bottom_solid_min_thickness = 1.0
  325. ensure_vertical_shell_thickness = 0
  326. external_perimeter_extrusion_width = 0.815
  327. external_perimeter_speed = 70
  328. external_perimeters_first = 0
  329. extra_perimeters = 1
  330. fill_angle = 90
  331. fill_density = 15%
  332. fill_pattern = rectilinear
  333. gap_fill_speed = 50
  334. infill_speed = 70
  335. inherits = *MK3 SPEED baseline (RLG 20200508)*
  336. layer_height = 0.4
  337. max_print_speed = 200
  338. max_volumetric_speed = 0
  339. notes = MAX
  340. perimeter_acceleration = 800
  341. perimeter_extrusion_width = 0.815
  342. perimeter_speed = 70
  343. perimeters = 4
  344. print_settings_id = MK3 MAX 0.40mm layers for 0.50mm+ nozzle (RLG 20200508)
  345. seam_position = nearest
  346. small_perimeter_speed = 20
  347. solid_infill_below_area = 70
  348. solid_infill_speed = 70
  349. thin_walls = 1
  350. top_solid_infill_speed = 70
  351. top_solid_min_thickness = 1.0
  352. travel_speed = 200
  353.  
  354. [print:MK3 AUTOSPEED 0.20mm layers for 0.25mm+ nozzle (RLG 20200508)]
  355. inherits = *MK3 QUALITY baseline (RLG 20200508)*
  356. bridge_acceleration = 1000
  357. bridge_flow_ratio = 0.95
  358. bridge_speed = 30
  359. nozzle_diameter[0]>=.25
  360. default_acceleration = 4000
  361. external_perimeter_speed = 20
  362. first_layer_speed = 20
  363. gap_fill_speed = 40
  364. infill_acceleration = 1500
  365. infill_speed = 0
  366. layer_height = 0.2
  367. notes = AUTO
  368. only_retract_when_crossing_perimeters = 1
  369. perimeter_acceleration = 800
  370. perimeter_extrusion_width = 0
  371. perimeter_speed = 0
  372. perimeters = 3
  373. small_perimeter_speed = 25
  374. support_material_speed = 50
  375.  
  376. [presets]
  377. print = MK3 QUALITY 0.20mm layers for 0.25mm+ nozzle (RLG 20200508)
  378.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement