Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-131-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: SSDPR-CX400-128-G2
- Serial Number: GX9022622
- LU WWN Device Id: 5 000000 000000000
- Firmware Version: H190117D
- User Capacity: 128.035.676.160 bytes [128 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: 2.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Tue Jan 3 09:13:18 2023 EET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 33) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 2) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x0031) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0
- 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 7494
- 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 708
- 167 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0
- 168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 0
- 169 Unknown_Attribute 0x0013 096 096 010 Pre-fail Always - 3407885
- 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
- 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0
- 173 Unknown_Attribute 0x0012 200 200 000 Old_age Always - 141739098166
- 175 Program_Fail_Count_Chip 0x0022 100 100 010 Old_age Always - 0
- 177 Wear_Leveling_Count 0x0012 100 100 000 Old_age Always - 0
- 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 100 100 000 Pre-fail Always - 1648
- 187 Reported_Uncorrect 0x0032 100 000 000 Old_age Always - 0
- 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 56
- 194 Temperature_Celsius 0x0022 048 048 000 Old_age Always - 48 (Min/Max 48/48)
- 199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
- 206 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 33
- 207 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 79
- 208 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 54
- 209 Unknown_SSD_Attribute 0x0032 200 200 000 Old_age Always - 1206
- 210 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 2516
- 211 Unknown_Attribute 0x0032 200 200 000 Old_age Always - 1953
- 231 Temperature_Celsius 0x0023 097 097 005 Pre-fail Always - 3
- 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 4340
- 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 3734
- 245 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement