Bookmark

;FLAVOR:Marlin
;TIME:2691
;Filament used: 1.80357m
;Layer height: 0.2
;MINX:29.848
;MINY:81.673
;MINZ:0.2
;MAXX:190.152
;MAXY:138.327
;MAXZ:1
;Generated with Cura_SteamEngine 4.10.0
M140 S65
M105
M190 S65
M104 S200
M105
M109 S200
M82 ;absolute extrusion mode
M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate

G28 ;Home

G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up

G92 E0
G92 E0
G1 F2700 E-6
;LAYER_COUNT:5
;LAYER:0
M107
M204 S500
M205 X8 Y8
G0 F7500 X40.901 Y83.792 Z0.2
;TYPE:SKIRT
G1 F2700 E0
G1 F1500 X41.466 Y83.52 E0.01981
G1 X41.726 Y83.404 E0.02881
G1 X42.159 Y83.222 E0.04365

.
.
.
.
.

G0 X150.993 Y105.741
G0 X146.906 Y107.874
G1 F2700 E1803.57069
G1 F2400 X146.851 Y107.818 E1803.572
;TIME_ELAPSED:2691.078518
G1 F2700 E1797.572
M140 S0
M205 X10 Y10
M107
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning

G1 X0 Y0 ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed

M84 X Y E ;Disable all steppers but Z

M82 ;absolute extrusion mode
M104 S0
;End of Gcode
;SETTING_3 {"global_quality": "[general]\\nversion = 4\\nname = CHEP4.10_0.20(Go
;SETTING_3 od)\\ndefinition = creality_ender5\\n\\n[metadata]\\ntype = quality_c
;SETTING_3 hanges\\nquality_type = standard\\nsetting_version = 17\\n\\n[values]
;SETTING_3 \\nacceleration_enabled = True\\njerk_enabled = True\\nlayer_height =
;SETTING_3  0.2\\nlayer_height_0 = 0.2\\nmaterial_bed_temperature = 65\\n\\n", "
;SETTING_3 extruder_quality": ["[general]\\nversion = 4\\nname = CHEP4.10_0.20(G
;SETTING_3 ood)\\ndefinition = creality_ender5\\n\\n[metadata]\\ntype = quality_
;SETTING_3 changes\\nquality_type = standard\\nintent_category = default\\nposit
;SETTING_3 ion = 0\\nsetting_version = 17\\n\\n[values]\\ncoasting_enable = Fals
;SETTING_3 e\\ninfill_line_distance = =0 if infill_sparse_density == 0 else (inf
;SETTING_3 ill_line_width * 100) / infill_sparse_density * (2 if infill_pattern
;SETTING_3 == 'grid' else (3 if infill_pattern == 'triangles' or infill_pattern
;SETTING_3 == 'trihexagon' or infill_pattern == 'cubic' or infill_pattern == 'cu
;SETTING_3 bicsubdiv' else (2 if infill_pattern == 'tetrahedral' or infill_patte
;SETTING_3 rn == 'quarter_cubic' else (1 if infill_pattern == 'cross' or infill_
;SETTING_3 pattern == 'cross_3d' else 1))))\\ninfill_pattern = grid\\ninfill_spa
;SETTING_3 rse_density = 15.0\\nmaterial_flow_layer_0 = 95\\nretraction_amount =
;SETTING_3  6\\nskirt_brim_speed = 25.0\\nspeed_layer_0 = 25.0\\nspeed_travel_la
;SETTING_3 yer_0 = 125.0\\nspeed_wall_x = 50.0\\ntop_bottom_thickness = 1\\ntrav
;SETTING_3 el_compensate_overlapping_walls_0_enabled = True\\nwall_0_material_fl
;SETTING_3 ow = 95\\nwall_0_wipe_dist = 0.4\\nwall_thickness = 1.2\\nxy_offset_l
;SETTING_3 ayer_0 = -0.1\\nz_seam_type = sharpest_corner\\n\\n"]}