C:\Usersm8>fastboot oem dmesg
...
(bootloader) [850620] register_debug_console: new entry ptr=0x10601800
(bootloader) [850629] ### HBoot3 main() start at 849ms
(bootloader) [851772] chipset_init: DDR - Elpida (Rev1:2)(Rev2:0) 2GB
(bootloader) [851780] chipset_ver is 107B80E1
(bootloader) [851820] ------ Reset Reason ------
(bootloader) [851837] PON_REASON = [851843] Keypad Power, [851849] (0x80)
(bootloader) [851863] WARM_RESET_REASON = [851868] PS Hold, [851874] (0x2
(bootloader) ), [851888] (0x0)
(bootloader) [851902] SOFT_RESET_REASON = [851908] (0x0), [851921] (0x0)
(bootloader) [851935] POFF_REASON = [851940] PS Hold, [851946] (0x2), [85
(bootloader) 1960] (0x0)
(bootloader) [851965] -------------------------
(bootloader) [857663] sdhci_register_driver
(bootloader) [857672] sdhci_open: id=4
(bootloader) [857682]  Initializing MMC host data structure and clock!
(bootloader) [857689] mmc slot#1 clock enabled
(bootloader) [857700] sdhci_set_clock: slot 1, freq 192000000
(bootloader) [857707] GPLL0 is enabled
(bootloader) [857715] clock_update_cfg is done
(bootloader) [857722] mmc clock set done
(bootloader) [859734] sdhci_set_bus_width: bus width 0
(bootloader) [859772] sdhci_clk_supply: freq 400000
(bootloader) [862859] Decoded CID fields:
(bootloader) [862865] Manufacturer ID: 45
(bootloader) [862871] OEM ID: 0x100
(bootloader) [862876] Product Name: SEM16G
(bootloader) [862883] Product revision: 1.12
(bootloader) [862889] Product serial number: E83ACA7
(bootloader) [862896] Manufacturing date: 1 2004
(bootloader) [865994] sdhci_clk_supply: freq 50000000
(bootloader) [870045] sdhci_set_bus_width: bus width 2
(bootloader) [870052] mmc_set_bus_width: bus width 6
(bootloader) [871071] sdhci_clk_supply: freq 50000000
(bootloader) [871078] sdhci set DDR mode
(bootloader) [871587] Done initialization of the card
(bootloader) [871593] erase_grpsize: 31
(bootloader) [871599] erase_grpmult: 31
(bootloader) [871605] wp_grpsize: 31
(bootloader) [871610] wp_grpen: 1
(bootloader) [871616] perm_wp: 0
(bootloader) [871621] temp_wp: 0
(bootloader) [871629] check pg1fs
(bootloader) [885289] check pg2fs
(bootloader) [972011] chipset_setting_init
(bootloader) [973541] [PGFS] partition_read_pgfs: pg1fs_security
(bootloader) [982662] chipset_setting_init: read pid 272
(bootloader) [982670] [PGFS] partition_read_pgfs: pg2fs_atsdebug_info
(bootloader) [993830] SECURE_SMEM_STRUCT 0x10a09000
(bootloader) [993841] [PGFS] partition_read_pgfs: pg1fs_simlock
(bootloader) [1002957] read_simlock(1340): 5750092B, CD1C4EA7
(bootloader) [1003166] radio_init_secure_smem(1014): C9F35678, 0
(bootloader) [1004267] [PGFS] partition_read_pgfs: pg1fs_simlock
(bootloader) [1013379] read_simlock_password(257): A0, 36, C9, 3A
(bootloader) [1013388] unlock_rec[0] = 0x10a0c000
(bootloader) [1013395] [PGFS] partition_read_pgfs: pg1fs_simunlock
(bootloader) [1022503] unlock_rec[1] = 0x10a0d000
(bootloader) [1022510] [PGFS] partition_read_pgfs: pg1fs_simunlock
(bootloader) [1031617] simlock_passwd 0x10a0b000
(bootloader) [1032352] secure_update_simlock ret = 0
(bootloader) [1032380] final simlock 0
(bootloader) [1032468] secure_set_simlock ret = 0
(bootloader) [1033046] [PGFS] partition_read_pgfs: pg2fs_tamper
(bootloader) [1044349] [INFO] rpm_init: RPM firmware 214.0.23
(bootloader) [1044372] [INFO] MPM_SLEEP_TICK: 117640377ms
(bootloader) [1044430] ### HBoot3 Current time: 2017-09-09 19:36:36
(bootloader) [1079079] radio_batt_level: NOT IMPLEMENTED!
(bootloader) [1079089] [BATT] setting_check_perflock_allowance: vol_curr=
(bootloader) 0 mV vol_limit=3550 mV
(bootloader) [1079095] Not allowed to enable perflock.
(bootloader) [1264126] --pm_check_power_on_status--
(bootloader) [1267758] Device CID is not powerkey debounce CID
(bootloader) [1272013] [PMIC-CHG] PMIC charger init by user parameters
(bootloader) [1277915] [PMIC-CHG] pm_chg_vtrkl_set: addr=0x1050, current=
(bootloader) 2500 setting 0x9
(bootloader) [1283818] [PMIC-CHG] pm_chg_vweak_set: addr=0x1052, current=
(bootloader) 3000 setting 0x9
(bootloader) [1289632] [PMIC-CHG] pm_chg_itrkl_set: addr=0x1054, current=
(bootloader) 200 setting 0xF
(bootloader) [1295623] [PMIC-CHG] pm_chg_itrkl_b_set: addr=0x1055, curren
(bootloader) t=500 setting 0x8
(bootloader) [1305086] [PMIC-CHG] qpnp_chg_bat_if_configure_btc: btc_disa
(bootloader) bled=0, hot_batt_p=25, cold_batt_p=80, mask=83, btc_cfg=82
(bootloader) [1307343] [BATT]4 cells initiated.
(bootloader) [1311422] [ADC-VOL] [ADC] read adc channel BATT_ID(49):
(bootloader) [1341796] [ADC-VOL] adc_code = :26099, physical= 135 mV
(bootloader) [1344486] [BATT]: cur_cell is initiated
(bootloader) [1346571] [PMIC-BMS] BMS init OK
(bootloader) [1357422] m8_battery_stored_data_check:magic_num=DDAACC11, s
(bootloader) tored_soc=0, stored_ocv=0, stored_cc=0, currtime=0, pre_delt
(bootloader) a_vddmax_mv=0
(bootloader) [1361584] Start Verify: 0
(bootloader) [1378035] Set LDO18 to 2.85V. ENUM ADDED
(bootloader) [1379513] Disable LDO18.
(bootloader) [1382289] Set LDO23 to 2.85V. ENUM ADDED
(bootloader) [1383765] Disable LDO23.
(bootloader) [1385502] Disable SRIO_1V8.
(bootloader) [1395875] Enable LDO18.
(bootloader) [1397526] Enable SRIO_1v8.
(bootloader) [1398914] Enable LDO23.
(bootloader) [1441285] [ADC-VOL] read adc channel VBAT(6):
(bootloader) [1454526] [ADC-VOL] adc_code = :39386, physical= 4305 mV
(bootloader) [1458604] [ADC-VOL] [ADC] read adc channel BATT_ID(49):
(bootloader) [1471758] [ADC-VOL] adc_code = :26096, physical= 135 mV
(bootloader) [1476011] [ADC-VOL] [ADC] read adc channel BATT_TEMP(48):
(bootloader) [1489166] [ADC-VOL] adc_code = :32840, physical= 315 mV
(bootloader) [1494546] [ADC-CURR] Change to use external Rsense, Rsense c
(bootloader) hannel:0x1
(bootloader) [1518662] [PMIC-BMS] vsense=2088 uV, r_sense:10 ohm, ibat=21
(bootloader) 3 mA
(bootloader) [1522827] [BATT] V=4305 mV, T=315 C, ID=135 mV, I=213 mA
(bootloader) [1530814] radio_boot_mode() poweron_status=0x00000001, reset
(bootloader) _reason=0x77665500, hw_reason=0x00000000
(bootloader) [1762379] usb_init_hw: pull up d+
(bootloader) [1794530] [PMIC-CHG] current=500 setting 0x5
(bootloader) [1796267] m8_set_charging(1)
(bootloader) [1802188] PMIC8941: v3.1
(bootloader) [1803577] PMIC8841: v2.1
(bootloader) [1804965] PM8941 Rev: 3
(bootloader) [1806443] m8_hw_reset_nfc
(bootloader) [1957104] m8_init_display
(bootloader) [1961446] m8_init_display id0:1, id1:0, pcb:128-5, engid:0
(bootloader) [1963876] mdp_clock_init
(bootloader) [1968912] pll1_enable: MMPLL enabled. pll0: 0x36005, pll1: 0
(bootloader) x36005
(bootloader) [2003125] m8_init_display end
(bootloader) [2004437] mipi_init
(bootloader) [2014142] mipi_dsi_cal_clk_rate:bitclk_rate=861552000, dsicl
(bootloader) k_rate=430776000, byteclk_rate=107694000, pclk_rate=14359200
(bootloader) 0
(bootloader) [2017960] mdss_dsi_pll_config: vco clock=>>430776000
(bootloader) [2048223] configure_dsicore_byteclk#129: status=0x1/0x1
(bootloader) [2053022] configure_dsicore_pclk#162: status=0x1/0x1
(bootloader) [2055366] mipi_dsi_panel_initialize
(bootloader) [2061566] mipi_read_back:0 0x1C04
(bootloader) [2063910] mipi_read_back:1 0x33BC00
(bootloader) [2066081] mipi_read_back:2 0x89F5
(bootloader) [2066948] id= 0xBC
(bootloader) [2074752] m8_sharp_novatek_panel_on display_id =0xBC
(bootloader) [2077444] PANEL_ID_M8_SHARP_NT35595 Cmd
(bootloader) [2078660] t_clk = a2a
(bootloader) [2079527] CMD Mode
(bootloader) [2207195] mipi_init done
(bootloader) [2209452] [CIR] m8_init_cir, enter.
(bootloader) [2211536] [CIR] m8_init_cir, end.
(bootloader) [2216830] set_supported_bootmode_option: bootmode option: HB
(bootloader) OOT added
(bootloader) [2222300] set_supported_bootmode_option: bootmode option: RA
(bootloader) MDUMP added
(bootloader) [2227682] set_supported_bootmode_option: bootmode option: RE
(bootloader) BOOT added
(bootloader) [2233844] set_supported_bootmode_option: bootmode option: RE
(bootloader) BOOT FASTBOOT added
(bootloader) [2239574] set_supported_bootmode_option: bootmode option: PO
(bootloader) WER DOWN added
(bootloader) [2245129] set_supported_bootmode_option: bootmode option: FA
(bootloader) STBOOT added
(bootloader) [2250684] set_supported_bootmode_option: bootmode option: RE
(bootloader) COVERY added
(bootloader) [2256676] set_supported_bootmode_option: bootmode option: FA
(bootloader) CTORY RESET added
(bootloader) [2262142] set_supported_bootmode_option: bootmode option: SI
(bootloader) MLOCK added
(bootloader) [2268133] set_supported_bootmode_option: bootmode option: CH
(bootloader) ECK SMARTSD added
(bootloader) [2273774] set_supported_bootmode_option: bootmode option: IM
(bootloader) AGE CRC added
(bootloader) [2279677] set_supported_bootmode_option: bootmode option: SH
(bootloader) OW BARCODE added
(bootloader) [2285668] set_supported_bootmode_option: bootmode option: RA
(bootloader) MDUMP TO SD added
(bootloader) [2291743] set_supported_bootmode_option: bootmode option: RA
(bootloader) MDUMP TO USB added
(bootloader) [2297907] set_supported_bootmode_option: bootmode option: RA
(bootloader) MDUMP TO EMMC added
(bootloader) [2303288] set_supported_bootmode_option: bootmode option: RE
(bootloader) BOOT added
(bootloader) [2304851] WirelessType = 3
(bootloader) [2306326] Board_PID : 272
(bootloader) [2310232] chipset_bootmode(): reset_reason=0x77665500
(bootloader) [2378903] 5.0-inch SHARP NT35595 FULL HD
(bootloader) [2382723] m8_init is finished: 22:51:17, Jan 15 2015
(bootloader) [2386629] chipset_bootmode(): reset_reason=0x77665500
(bootloader) [2388800] DEBUG_DISABLE_WDT: 0x90!
(bootloader) [2390013] Boot Mode: 2
(bootloader) [2392012] Platform: hTCBmsm8974
(bootloader) [2394268] User Trial Debug Flag: 0
(bootloader) [2398905] [PGFS] partition_read_pgfs: pg2fs_tamper
(bootloader) [2436402] display_control_string: focus on HBOOT
(bootloader) [2570125] m8_init_backlight
(bootloader) [2572339] mipi dsi set backlight
(bootloader) [2576246] pmic_set_boot_done: Pmic has not initialize
(bootloader) [2577375] usb_Vbus  0
(bootloader) [2808998] usb_init_hw: pull low d+
(bootloader) [2840446] usb_check_vbus: pull up d+
(bootloader) [2842789]
(bootloader) ###[ Fastboot Mode ]###
(bootloader) [2846697] chipset_bootmode(): reset_reason=0x77665500
(bootloader) [2848867] clear battery eMMC data
(bootloader) [2859109] m8_battery_stored_data_clean:magic_num=0, stored_s
(bootloader) oc=0, stored_ocv=0, stored_cc=0, currtime=0, pre_delta_vddma
(bootloader) x_mv=0
(bootloader) [2863281] Start Verify: 0
(bootloader) [2871594]
(bootloader) USB_STS_SUSPEND
(bootloader) [2874720] [PMIC-CHG] current=500 setting 0x5
(bootloader) [2876455] m8_set_charging(1)
(bootloader) [2942845]
(bootloader) USB_STS_RESET
(bootloader) [2945039] USB_SPEED_HIGH
(bootloader) [3149557] usb_setup:DEVICE_WRITE:SET_CONFIGURATION:1
(bootloader) [121931156] fastboot_command:[oem dmesg]
(bootloader) [121932719] fb_cmd_oem:dmesg
(bootloader) [121937060] register_debug_console: new entry ptr=0x10602600
OKAY [  1.896s]
finished. total time: 1.901s