1:80000000
C2
?
C3h
SD card is detected !!
C4
Command 0x00000000
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x000000A0
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000000
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x00000000
Command 0x00000008
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x00000008
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000001
	response 0x9801058D = 0x000000AA
	response 0x9801058E = 0x00000013
Command 0x00000037
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x00000037
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000001
	response 0x9801058D = 0x00000020
	response 0x9801058E = 0x00000083
AppCommand 0x00000029
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x0000003F
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x000000FF
	response 0x9801058C = 0x00000080
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x000000FF
Command 0x00000037
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x00000037
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000001
	response 0x9801058D = 0x00000020
	response 0x9801058E = 0x00000083
AppCommand 0x00000029
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x0000003F
	response 0x9801058A = 0x000000C1
	response 0x9801058B = 0x000000FF
	response 0x9801058C = 0x00000080
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x000000FF
card powerup status = 0x000000C1
card capacity status = 0x00000001
can switch to 1.8V = 0x00000001
Command 0x0000000B
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x0000000B
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000003
	response 0x9801058D = 0x00000020
	response 0x9801058E = 0x000000BD
wait 0x98010585[4:0] 0
wait 0x98010585[4:0] done
wait 0x98010585[4:0] 1
wait 0x98010585[4:0] done
Command 0x00000002
	interrupt 0x98010424 = 0x00000012
	Command pass
	response 0x98010589 = 0x00000065
	response 0x9801058A = 0x00000027
	response 0x9801058B = 0x000000B0
	response 0x9801058C = 0x00000001
	response 0x9801058D = 0x00000024
	response 0x9801058E = 0x000000A7
	CID 0xA0000 = 0x%x
44411D3F
	CID 0xA0004 = 0x%x
20204453
	CID 0xA0008 = 0x%x
65B60220
	CID 0xA000C = 0x%x
2401B027
Command 0x00000003
	interrupt 0x98010424 = 0x00000012
	Command pass
	response 0x98010589 = 0x00000003
	response 0x9801058A = 0x00000059
	response 0x9801058B = 0x000000B4
	response 0x9801058C = 0x00000005
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x00000003
RCA = 0x000059B4
Command 0x00000007
	interrupt 0x98010424 = 0x00000012
	Command pass
	response 0x98010589 = 0x00000007
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000007
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x00000075
SD card has been initialized.
Command 0x00000037
	interrupt 0x98010424 = 0x00000012
	Command pass
	response 0x98010589 = 0x00000037
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000009
	response 0x9801058D = 0x00000020
	response 0x9801058E = 0x00000033
AppCommand 0x00000006
	interrupt 0x98010424 = 0x00000012
	Command pass
	response 0x98010589 = 0x00000006
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000009
	response 0x9801058D = 0x00000020
	response 0x9801058E = 0x000000B9
4-bit bus width
SDR12/normal mode.
Command 0x00000006
	interrupt 0x98010424 = 0x00000012
	Command pass
	response 0x98010589 = 0x00000006
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000009
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x000000DD
DMA finished
cr_auto_Read_Write_1, cmd_idx = 0x00000012
	Command pass
	response 0x98010589 = 0x0000000C
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x0000000B
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x0000007F
	interrupt 0x98010424 = 0x00000012
Command 0x0000000D
	interrupt 0x98010424 = 0x00000002
	Command pass
	response 0x98010589 = 0x0000000D
	response 0x9801058A = 0x00000000
	response 0x9801058B = 0x00000000
	response 0x9801058C = 0x00000009
	response 0x9801058D = 0x00000000
	response 0x9801058E = 0x0000003F
64b


U-Boot 2015.07 (May 14 2018 - 15:35:43 +0800)

CPU  : Cortex-A53 Quad Core - AARCH64
Board: Realtek QA Board
DRAM:  2 GiB
Watchdog: Disabled
mapping memory 0x20000000-0x40000000 non-cached
flushing dcache successfully.
MMC:   Initialize eMMC in traditional mmc flow.
RTD1295 eMMC: 0
rsp[0]=0x15010038,
        	       rsp[1]=0x474d4534,
        	       rsp[2]=0x520165dd,
        	       rsp[3]=0x488054ed
The cid_val is 15.
rsp[0]=0xd0270132,
        	       rsp[1]=0x0f5903ff,
        	       rsp[2]=0xf6dbffef,
        	       rsp[3]=0x8e40400d
mmc->version=0x40000000
version=0x00000004
[LY] cardtype=57, mmc->card_caps=0f
[LY] freq = 00464388, clk diver = 00000080
[LY] speed up emmc at HS-200
[LY] HS-200 bus width=2
[LY] mmc->boot_caps = 20b
TEMP TX_WINDOW=0x7fffffde, TX_best=0x12
RX_WINDOW=0xffffff01, RX_best=0x14
TX1_WINDOW=0x7fffffc0, TX_best=0x12
[LY] hs200 : 0
[HC] ERASE Unit Size = 524288 bytes
[HC] WPG_SIZE = 8388608 bytes
Device: RTD1295 eMMC
Manufacturer ID: 15
OEM: 100
Name: 8GME4
Tran Speed: 200000000
Rd Block Len: 512
MMC version 4.0
High Capacity: No
Capacity: 7.3 GiB
User Capacity: 7.3 GiB
Boot Capacity: 4 MiB
RPMB Capacity: 512 KiB
Bus Width: 8-bit
Speed: HS200
SD:
SD device index# 0
mmc->scr[0]=2358003,mmc->scr[1]=0
SD: init done, no error
SD: capacity 30881792 sectors(0x1d73800), (15079 MB)
Factory: SD
[FAC] No factory data in SD
------------can't find tmp/factory/000BootParam.h
[ENV] read_env from factory failed
Using default environment

*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
HDMITx_HPD=False
------------can't find tmp/factory/video_rpc.bin
tv_system=25 mode=1
Net:   Realtek PCIe GBE Family Controller mcfg = 0024
dev->name=r8168#0
Checking default environment
Hit Esc or Tab key to enter console mode or rescue linux:  0
------------can't find tmp/factory/recovery

Press Esc Key

Enter console mode, disable watchdog ...

BPI-W2>
nknown command 'ry 'help'
BPI-W2>
BPI-W2>
BPI-W2> setenv ipaddr 192.168.100.24
BPI-W2> setenv serverip 192.168.100.39
BPI-W2> tftp uImage
Using r8168#0 device
TFTP from server 192.168.100.39; our IP address is 192.168.100.24
Filename 'uImage'.
Load address: 0x3000000
Loading: #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #############################
	 760.7 KiB/s
done
Bytes transferred = 12792168 (c33168 hex)
BPI-W2> fatload sd 0:1 1500000 uImage
reading uImage
12792168 bytes read in 618 ms (19.7 MiB/s)
BPI-W2> cmp.b 0x1500000 0x3000000 0xc33168
Total of 12792168 byte(s) were the same
BPI-W2> tftp bpi-w2.dtb
Using r8168#0 device
TFTP from server 192.168.100.39; our IP address is 192.168.100.24
Filename 'bpi-w2.dtb'.
Load address: 0x3000000
Loading: ############
	 798.8 KiB/s
done
Bytes transferred = 58131 (e313 hex)
BPI-W2> fatload sd 0:1 1500000 bpi-w2.dtb
reading bpi-w2.dtb
58131 bytes read in 5 ms (11.1 MiB/s)
BPI-W2> cmp.b 0x1500000 0x3000000 0xe313
Total of 58131 byte(s) were the same