SHARE
TWEET

enb_log

kdani92 Aug 7th, 2017 (edited) 66 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # /dev/cpu_dma_latency set to 0us
  2. log init done
  3. num component carrier 1
  4. WARNING: setting 'gtpu_log_level' not found in configuration file
  5. WARNING: setting 'gtpu_log_verbosity' not found in configuration file
  6. WARNING: setting 'udp_log_level' not found in configuration file
  7. WARNING: setting 'udp_log_verbosity' not found in configuration file
  8. WARNING: setting 'osa_log_level' not found in configuration file
  9. WARNING: setting 'osa_log_verbosity' not found in configuration file
  10.  
  11. ----------------------------------------------------------------------
  12.  ENB CONFIG FILE CONTENT LOADED (TBC):
  13. ----------------------------------------------------------------------
  14. ENB CONFIG for instance 0:
  15.  
  16.     eNB name:               eNB_Eurecom_LTEBox:
  17.     eNB ID:                 3584:
  18.     Cell type:              CELL_MACRO_ENB:
  19.     TAC:                    1:
  20.     MCC:                    244:
  21.     MNC:                    09:
  22.  
  23.     node_function for CC 0:         eNodeB_3GPP:
  24.     node_timing for CC 0:           synch_to_ext_device:
  25.     node_synch_ref for CC 0:        0:
  26.     eutra band for CC 0:            7:
  27.     downlink freq for CC 0:         2685000000:
  28.     uplink freq offset for CC 0:    -120000000:
  29.  
  30.     Cell ID for CC 0:   0:
  31.     N_RB_DL for CC 0:   50:
  32.     nb_antenna_ports for CC 0:  1:
  33.     nb_antennas_tx for CC 0:    1:
  34.     nb_antennas_rx for CC 0:    1:
  35.     rach_numberOfRA_Preambles for CC 0: 15:
  36.     rach_preamblesGroupAConfig for CC 0:    0:
  37.     rach_powerRampingStep for CC 0: 2:
  38.     rach_preambleInitialReceivedTargetPower for CC 0:   8:
  39.     rach_preambleTransMax for CC 0: 6:
  40.     rach_raResponseWindowSize for CC 0: 7:
  41.     rach_macContentionResolutionTimer for CC 0: 5:
  42.     rach_maxHARQ_Msg3Tx for CC 0:   4:
  43.     bcch_modificationPeriodCoeff for CC 0:  0:
  44.     pcch_defaultPagingCycle for CC 0:   2:
  45.     pcch_nB for CC 0:   2:
  46.     prach_root for CC 0:    0:
  47.     prach_config_index for CC 0:    0:
  48.     prach_high_speed for CC 0:  0:
  49.     prach_zero_correlation for CC 0:    1:
  50.     prach_freq_offset for CC 0: 2:
  51.     pdsch_referenceSignalPower for CC 0:    -27:
  52.     pdsch_p_b for CC 0: 0:
  53.     pusch_n_SB for CC 0:    1:
  54.     pusch_hoppingMode for CC 0: 0:
  55.     pusch_hoppingOffset for CC 0:   0:
  56.     pusch_enable64QAM for CC 0: 0:
  57.     pusch_groupHoppingEnabled for CC 0: 1:
  58.     pusch_groupAssignment for CC 0: 0:
  59.     pusch_sequenceHoppingEnabled for CC 0:  0:
  60.     pusch_nDMRS1 for CC 0:  1:
  61.     pucch_delta_shift for CC 0: 0:
  62.     pucch_nRB_CQI for CC 0: 1:
  63.     pucch_nCS_AN for CC 0:  0:
  64.     srs_enable for CC 0:    0:
  65.     pusch_p0_Nominal for CC 0:  -96:
  66.     pucch_p0_Nominal for CC 0:  -104:
  67.     pusch_alpha for CC 0:   7:
  68.     pucch_deltaF_Format1 for CC 0:  2:
  69.     pucch_deltaF_Format1b for CC 0: 1:
  70.     pucch_deltaF_Format2 for CC 0:  1:
  71.     pucch_deltaF_Format2a for CC 0: 1:
  72.     pucch_deltaF_Format2b for CC 0: 1:
  73.     msg3_delta_Preamble for CC 0:   6:
  74.     ul_CyclicPrefixLength for CC 0: 0:
  75.     ue_TimersAndConstants_t300 for CC 0:    5:
  76.     ue_TimersAndConstants_t301 for CC 0:    5:
  77.     ue_TimersAndConstants_t310 for CC 0:    5:
  78.     ue_TimersAndConstants_n310 for CC 0:    7:
  79.     ue_TimersAndConstants_t311 for CC 0:    3:
  80.     ue_TimersAndConstants_n311 for CC 0:    0:
  81.     ue_TransmissionMode for CC 0:   0:
  82.  
  83.     Global log level:   info
  84.     HW log level:       info
  85.     PHY log level:      info
  86.     MAC log level:      info
  87.     RLC log level:      info
  88.     PDCP log level:     info
  89.     RRC log level:      info
  90.     UDP log level:      info
  91.     GTP log level:      info
  92.     OSA log level:      info
  93.  
  94. --------------------------------------------------------
  95. Downlink frequency/ uplink offset of CC_id 0 set to 2685000000/-120000000
  96. configuring for eNB
  97. CPU Freq is 3.392339
  98. [NETLINK] Error opening socket -1 (93:Protocol not supported)
  99. [NETLINK]Opened socket with fd -1
  100. [NETLINK] Error fcntl (9:Bad file descriptor)
  101. reported resolution = 1 ns
  102. [HW][I]Version: Branch: HEAD Abrev. Hash: 08b8b3142 Date: Mon Jun 26 10:12:41 2017 +0200
  103. [PHY][I]Initializing frame parms for N_RB_DL 50, Ncp 0, osf 1
  104. lte_parms.c: Setting N_RB_DL to 50, ofdm_symbol_size 1024
  105. [PHY][I][eNB 0] Initializing DL_FRAME_PARMS : N_RB_DL 50, PHICH Resource 1, PHICH Duration 0
  106. [openair][LTE_PHY][INIT] common_vars->txdataF[0][0] = 0x7fb7859c1040 (573440 bytes)
  107. [openair][LTE_PHY][INIT] common_vars->txdataF[0][5] = 0x7fb785934040 (573440 bytes)
  108. [openair][LTE_PHY][INIT] common_vars->txdata[0][0] = 0x7fb78589d040 (614400 bytes)
  109. [openair][LTE_PHY][INIT] common_vars->rxdata[0][0] = 0x7fb785806040 (614400 bytes)
  110. [openair][LTE_PHY][INIT] common_vars->rxdata_7_5kHz[0][0] = 0x7fb78927b040 (122880 bytes)
  111. [openair][LTE_PHY][INIT] prach_vars->rxsigF[0] = 0x55940502d800
  112. [openair][LTE_PHY][INIT] prach_vars->prach_ifft[0] = 0x559405039860
  113. [PHY][I]init eNB: Node Function 0
  114. [PHY][I]init eNB: Nid_cell 0
  115. [PHY][I]init eNB: frame_type 0,tdd_config 3
  116. [PHY][I]init eNB: number of ue max 16 number of enb max 1 number of harq pid max 8
  117. [PHY][I]init eNB: N_RB_DL 50
  118. [PHY][I]init eNB: prach_config_index 0
  119. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 0
  120. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 0
  121. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 1
  122. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 1
  123. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 2
  124. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 2
  125. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 3
  126. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 3
  127. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 4
  128. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 4
  129. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 5
  130. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 5
  131. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 6
  132. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 6
  133. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 7
  134. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 7
  135. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 8
  136. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 8
  137. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 9
  138. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 9
  139. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 10
  140. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 10
  141. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 11
  142. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 11
  143. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 12
  144. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 12
  145. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 13
  146. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 13
  147. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 14
  148. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 14
  149. [PHY][I]Allocating Transport Channel Buffers for DLSCH, UE 15
  150. [PHY][I]Allocating Transport Channel Buffer for ULSCH, UE 15
  151. CPU Freq is 3.392337
  152. frame_parms->N_RB_DL=50
  153. frame_parms->N_RB_UL=50
  154. frame_parms->Nid_cell=0
  155. frame_parms->Ncp=0
  156. frame_parms->Ncp_UL=0
  157. frame_parms->nushift=0
  158. frame_parms->frame_type=0
  159. frame_parms->tdd_config=3
  160. frame_parms->tdd_config_S=0
  161. frame_parms->mode1_flag=1
  162. frame_parms->nb_antenna_ports_eNB=1
  163. frame_parms->nb_antennas_tx=1
  164. frame_parms->nb_antennas_rx=1
  165. frame_parms->ofdm_symbol_size=1024
  166. frame_parms->nb_prefix_samples=72
  167. frame_parms->nb_prefix_samples0=80
  168. frame_parms->first_carrier_offset=724
  169. frame_parms->samples_per_tti=15360
  170. frame_parms->symbols_per_tti=14
  171. HW: Configuring card 0, nb_antennas_tx/rx 1/1
  172. Card 0, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  173. Card 0, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  174. Card 0, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  175. Card 0, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  176. HW: Configuring card 1, nb_antennas_tx/rx 1/1
  177. Card 1, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  178. Card 1, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  179. Card 1, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  180. Card 1, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  181. HW: Configuring card 2, nb_antennas_tx/rx 1/1
  182. Card 2, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  183. Card 2, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  184. Card 2, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  185. Card 2, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  186. HW: Configuring card 3, nb_antennas_tx/rx 1/1
  187. Card 3, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  188. Card 3, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  189. Card 3, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  190. Card 3, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  191. HW: Configuring card 4, nb_antennas_tx/rx 1/1
  192. Card 4, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  193. Card 4, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  194. Card 4, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  195. Card 4, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  196. HW: Configuring card 5, nb_antennas_tx/rx 1/1
  197. Card 5, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  198. Card 5, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  199. Card 5, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  200. Card 5, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  201. HW: Configuring card 6, nb_antennas_tx/rx 1/1
  202. Card 6, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  203. Card 6, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  204. Card 6, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  205. Card 6, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  206. HW: Configuring card 7, nb_antennas_tx/rx 1/1
  207. Card 7, channel 0, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 2685000000.000000, rx_freq 2565000000.000000
  208. Card 7, channel 1, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  209. Card 7, channel 2, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  210. Card 7, channel 3, Setting tx_gain 90.000000, rx_gain 120.000000, tx_freq 0.000000, rx_freq 0.000000
  211. [HW][I]CPU Affinity of main() function is...  CPU_0  CPU_1  CPU_2  CPU_3  CPU_4  CPU_5  CPU_6  CPU_7
  212. [PHY][I]Intializing L2
  213. [MAC][I][l2_init] [MAIN] MAC_INIT_GLOBAL_PARAM IN...
  214. [MAC][I][mac_init_global_param] [MAIN] CALLING RLC_MODULE_INIT...
  215. [MAC][I][mac_init_global_param] [MAIN] RLC_MODULE_INIT OK, malloc16 for mac_rlc_xface...
  216. [MAC][I][mac_init_global_param] [MAIN] malloc16 OK, mac_rlc_xface @ 0x559408985400
  217. [MAC][I][mac_init_global_param] [MAIN] RLC interface setup and init
  218. [PDCP][I]PDCP layer has been initialized
  219. [MAC][I][mac_init_global_param] [MAIN] Init Global Param Done
  220. [MAC][I][l2_init] [MAIN] init eNB MAC functions  
  221. [MAC][I][l2_init] [MAIN] init UE MAC functions
  222. [MAC][I][l2_init] [MAIN] PHY Frame configuration
  223. [MAC][I][mac_top_init] [MAIN] Init function start:Nb_UE_INST=0
  224. [MAC][I][mac_top_init] [MAIN] Init function start:Nb_eNB_INST=1
  225. [MAC][I][mac_top_init] [MAIN] calling RRC
  226. [RRC][I][eNB] handover active state is 0
  227. [RRC][I][eNB] eMBMS active state is 0
  228. [MAC][I][mac_top_init] [MAIN][INIT] Init function finished
  229. [SCTP][I][sctp_eNB_task] Starting SCTP layer
  230. [S1AP][I][s1ap_eNB_task] Starting S1AP layer
  231. [UDP][I]Initializing UDP task interface
  232. [UDP][I]Initializing UDP task interface: DONE
  233. [GTPV1U][I]Initializing GTPU stack 0x5593efa1d800
  234. ITTI tasks created
  235. Wait for the ITTI initialize message
  236. [UDP][I]Initializing UDP for local address 127.0.0.10 with port 2152
  237. [UDP][I]Inserting new descriptor for task 11, sd 40
  238. [UDP][I]Initializing UDP for local address 127.0.0.10 with port 2152: DONE
  239. [ENB_APP][I][eNB_app_register] [eNB 0] eNB_app_register for instance 0
  240. [RRC][I][eNB 0] Received RRC_CONFIGURATION_REQ
  241. [S1AP][I][s1ap_eNB_handle_register_eNB] Registered new eNB[0] and macro eNB id 3584
  242. [S1AP][I][s1ap_eNB_register_mme] [eNB 0] check the mme registration state
  243. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Init...
  244. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Checking release
  245. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] Rel14 RRC detected, MBMS flag 0
  246. [RRC][I][eNB 0] Configuration SIB2/3, MBMS = 0
  247. [MAC][I][rrc_mac_config_req] [CONFIG][eNB 0/0] Configuring MAC/PHY
  248. [MAC][I][rrc_mac_config_req] [CONFIG]SIB2/3 Contents (partial)
  249. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.n_SB = 1
  250. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.hoppingMode = 0
  251. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.pusch_HoppingOffset = 0
  252. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.enable64QAM = 0
  253. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.groupHoppingEnabled = 1
  254. [SCTP][I][sctp_handle_new_association_req] Converted ipv4 address 127.0.0.20 to network type
  255. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.groupAssignmentPUSCH = 0
  256. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.sequenceHoppingEnabled = 0
  257. [MAC][I][rrc_mac_config_req] [CONFIG]pusch_config_common.cyclicShift  = 1
  258. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI 0] OPENAIR RRC IN....
  259. [SCTP][I][sctp_handle_new_association_req] connectx assoc_id  15 in progress..., used 1 addresses
  260. [SCTP][I][sctp_handle_new_association_req] Inserted new descriptor for sd 41 in list, nb elements 1, assoc_id 15
  261. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  262. [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32769
  263. [SCTP][I][sctp_eNB_read_from_socket] Client association changed: 0
  264. [SCTP][I][sctp_get_peeraddresses] ----------------------
  265. [SCTP][I][sctp_get_peeraddresses] Peer addresses:
  266. [SCTP][I][sctp_get_peeraddresses]     - [127.0.0.20]
  267. [SCTP][I][sctp_get_peeraddresses] ----------------------
  268. [SCTP][I][sctp_get_sockinfo] ----------------------
  269. [SCTP][I][sctp_get_sockinfo] SCTP Status:
  270. [SCTP][I][sctp_get_sockinfo] assoc id .....: 15
  271. [SCTP][I][sctp_get_sockinfo] state ........: 4
  272. [SCTP][I][sctp_get_sockinfo] instrms ......: 2
  273. [SCTP][I][sctp_get_sockinfo] outstrms .....: 2
  274. [SCTP][I][sctp_get_sockinfo] fragmentation : 65484
  275. [SCTP][I][sctp_get_sockinfo] pending data .: 0
  276. [SCTP][I][sctp_get_sockinfo] unack data ...: 0
  277. [SCTP][I][sctp_get_sockinfo] rwnd .........: 106496
  278. [SCTP][I][sctp_get_sockinfo] peer info     :
  279. [SCTP][I][sctp_get_sockinfo]     state ....: 2
  280. [SCTP][I][sctp_get_sockinfo]     cwnd .....: 131064
  281. [SCTP][I][sctp_get_sockinfo]     srtt .....: 0
  282. [SCTP][I][sctp_get_sockinfo]     rto ......: 3000
  283. [SCTP][I][sctp_get_sockinfo]     mtu ......: 65532
  284. [SCTP][I][sctp_get_sockinfo] ----------------------
  285. [SCTP][I][sctp_eNB_read_from_socket] Comm up notified for sd 41, assigned assoc_id 15
  286. [S1AP][I][s1ap_eNB_generate_s1_setup_request] 3584 -> 00e000
  287. [SCTP][I][sctp_send_data] Successfully sent 59 bytes on stream 0 for assoc_id 15
  288. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  289. [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
  290. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  291. [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 27 received from port 36412, on stream 0, PPID 18
  292. [S1AP][I][s1ap_decode_s1ap_s1setupresponseies] Decoding message S1ap_S1SetupResponseIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3535)
  293. [S1AP][I][s1ap_eNB_handle_s1_setup_response] servedGUMMEIs.list.count 1
  294. [S1AP][I][s1ap_eNB_handle_s1_setup_response] servedPLMNs.list.count 1
  295. [ENB_APP][I][eNB_app_task] [eNB 0] Received S1AP_REGISTER_ENB_CNF: associated MME 1
  296. Initializing eNB threads
  297. [PHY][I]Initializing eNB 0 CC_id 0 : (eNodeB_3GPP,synch_to_ext_device)
  298. linux; GNU C++ version 6.3.0 20170406; Boost_106200; UHD_003.010.002.000-0-ge75c7d6f
  299.  
  300. [PHY][I]Checking for USRPs : UHD 003.010.002.000-0-ge75c7d6f (3.10.2)
  301. [PHY][I]Found USRP B200
  302. -- Detected Device: B210
  303. -- Operating over USB 3.
  304. -- Initialize CODEC control...
  305. -- Initialize Radio control...
  306. -- Performing register loopback test... pass
  307. -- Performing register loopback test... pass
  308. -- Performing CODEC loopback test... pass
  309. -- Performing CODEC loopback test... pass
  310. -- Setting master clock rate selection to 'automatic'.
  311. -- Asking for clock rate 16.000000 MHz...
  312. -- Actually got clock rate 16.000000 MHz.
  313. -- Performing timer loopback test... pass
  314. -- Performing timer loopback test... pass
  315. -- Setting master clock rate selection to 'manual'.
  316. -- Asking for clock rate 30.720000 MHz...
  317. -- Actually got clock rate 30.720000 MHz.
  318. -- Performing timer loopback test... pass
  319. -- Performing timer loopback test... pass
  320. [PHY][I]cal 0: freq 3500000000.000000, offset 44.000000, diff 935000000.000000
  321. [PHY][I]cal 1: freq 2660000000.000000, offset 49.800000, diff 95000000.000000
  322. [PHY][I]cal 2: freq 2300000000.000000, offset 51.000000, diff 265000000.000000
  323. [PHY][I]cal 3: freq 1880000000.000000, offset 53.000000, diff 685000000.000000
  324. [PHY][I]cal 4: freq 816000000.000000, offset 57.000000, diff 1749000000.000000
  325. [PHY][I]RX Gain 0 120.000000 (52.800000) => 67.200000 (max 76.000000)
  326. [PHY][I]Actual master clock: 30.720000MHz...
  327. [PHY][I]RF board max packet size 3836, size for 100┬Ás jitter 1536
  328. [PHY][I]rx_max_num_samps 1536
  329. [PHY][I]RX Channel 0
  330. [PHY][I]  Actual RX sample rate: 15.360000MSps...
  331. [PHY][I]  Actual RX frequency: 2.565000GHz...
  332. [PHY][I]  Actual RX gain: 67.000000...
  333. [PHY][I]  Actual RX bandwidth: 20.000000M...
  334. [PHY][I]  Actual RX antenna: RX2...
  335. [PHY][I]TX Channel 0
  336. [PHY][I]  Actual TX sample rate: 15.360000MSps...
  337. [PHY][I]  Actual TX frequency: 2.685000GHz...
  338. [PHY][I]  Actual TX gain: 89.750000...
  339. [PHY][I]  Actual TX bandwidth: 20.000000M...
  340. [PHY][I]  Actual TX antenna: TX/RX...
  341. [PHY][I]Device timestamp: 0.000259...
  342. [RRH] has loaded USRP B200 device.
  343. setup_eNB_buffers: frame_parms = 0x7fb785a4e788
  344. [PHY][I]Initializing eNB 0 CC_id 0 (eNodeB_3GPP,synch_to_ext_device),
  345. [HW][I][SCHED][eNB] eNB_thread_single started on CPU 4 TID 1701, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
  346. waiting for sync (eNB_thread_single)
  347. Creating te_thread
  348. [PHY][I]thread te created id=1704[HW][I][SCHED][eNB] eNB_thread_prach started on CPU 1 TID 1705, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
  349. [HW][I][SCHED][eNB] eNB_thread_synch started on CPU 1 TID 1706, sched_policy = SCHED_FIFO , priority = 99, CPU Affinity= CPU_0 CPU_1 CPU_2 CPU_3 CPU_4 CPU_5 CPU_6 CPU_7
  350. waiting for sync (eNB_thread_synch)
  351. Setting eNB buffer to all-RX
  352. Sending sync to all threads
  353. TYPE <CTRL-C> TO TERMINATE
  354. Entering ITTI signals handler
  355. got sync (eNB_thread_single)
  356. got sync (eNB_thread_synch)
  357. [PHY][I][eNB 0][RAPROC] Frame 401 Terminating ra_proc for harq 0, UE 0
  358. [MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 401, Received CCCH:  50.98.54.b8.99.96, Terminating RA procedure for UE rnti a52b
  359. [MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 401 CCCH: Received Msg3: length 6, offset 5
  360. MAC: new UE id 0 rnti a52b
  361. [MAC][I][rx_sdu] [eNB 0][RAPROC] CC_id 0 Frame 401 Added user with rnti a52b => UE 0
  362. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Received RRC_MAC_CCCH_DATA_IND
  363. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 0, UE 0: not configured, skipping UE scheduling
  364. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Accept new connection from UE random UE identity (0x99894b8509000000) MME code 0 TMSI 0 cause 3
  365. [MAC][I][rrc_mac_config_req] [CONFIG][eNB 0/0] Configuring MAC/PHY for UE 0 (a52b)
  366. [PHY][I]phy_config_dedicated_eNB: physicalConfigDedicated=0x7fb748003290
  367. [PHY][I]Transmission Mode (phy_config_dedicated_eNB) 1
  368. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] [RAPROC] Logical Channel DL-CCCH, Generating RRCConnectionSetup (bytes 25)
  369. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b]CALLING RLC CONFIG SRB1 (rbid 1)
  370. [PDCP][N][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB 01]  Action ADD  LCID 1 (SRB id 1) configured with SN size 5 bits and RLC AM
  371. [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] [SRB 1] rrc_rlc_add_rlc  SRB
  372. [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01][CONFIGURE] max_retx_threshold 4 poll_pdu 4 poll_byte 65535 t_poll_retransmit 80 t_reordering 35 t_status_prohibit 0
  373. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 1, UE 0: not configured, skipping UE scheduling
  374. [PHY][I][eNB 0] Sent physicalConfigDedicated=0x7fb748003290 for UE 0
  375. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 2, UE 0: not configured, skipping UE scheduling
  376. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 3, UE 0: not configured, skipping UE scheduling
  377. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 4, UE 0: not configured, skipping UE scheduling
  378. [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 402, subframeP 5: Generating Msg4 with RRC Piggyback (RA proc 0, RNTI a52b)
  379. [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 402 subframeP 5 Msg4 : TBS 41, sdu_len 25, msg4_header 8, msg4_padding 0, msg4_post_padding 7
  380. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 5, UE 0: not configured, skipping UE scheduling
  381. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 6, UE 0: not configured, skipping UE scheduling
  382. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 7, UE 0: not configured, skipping UE scheduling
  383. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 8, UE 0: not configured, skipping UE scheduling
  384. [MAC][I][schedule_ulsch_rnti] [eNB 0] frame 402 subfarme 9, UE 0: not configured, skipping UE scheduling
  385. [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 403, subframeP 0: Checking if Msg4 was acknowledged:
  386. MAC: msg4 acknowledged for rnti a52b fsf 403/0, let's configure it
  387. [MAC][I][schedule_RA] [eNB 0][RAPROC] CC_id 0 Frame 403, subframeP 0 : Msg4 acknowledged
  388. [MAC][I][schedule_ulsch_rnti] [eNB 0][PUSCH 2/a52b] CC_id 0 Frame 403 subframeP 0 Scheduled UE 0 (mcs 10, first rb 1, nb_rb 6, rb_table_index 5, TBS 129, harq_pid 2)
  389. [MAC][I][rx_sdu] [eNB 0] CC_id 0 MAC CE_LCID 29 : ul_total_buffer = 0 (lcg increment 0)
  390. [RRC][N][eNB 0] Frame 403: received a DCCH 1 message on SRB 1 with Size 71 from UE a52b
  391. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Received on DCCH 1 RRC_DCCH_DATA_IND
  392. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] [RAPROC] Logical Channel UL-DCCH, processing RRCConnectionSetupComplete from UE (SRB1 Active)
  393. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] UE State = RRC_CONNECTED
  394. [S1AP][I][s1ap_eNB_handle_nas_first_req] Found usable eNB_ue_s1ap_id: 0x06692d 420141(10)
  395. [SCTP][I][sctp_send_data] Successfully sent 115 bytes on stream 1 for assoc_id 15
  396. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  397. [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
  398. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  399. [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 62 received from port 36412, on stream 1, PPID 18
  400. [S1AP][I][s1ap_decode_s1ap_downlinknastransporties] Decoding message S1ap_DownlinkNASTransportIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3150)
  401. [RRC][I][eNB 0] Received S1AP_DOWNLINK_NAS: ue_initial_id 1, eNB_ue_s1ap_id 420141
  402. [PDCP][I][FRAME 00000][eNB][MOD 00][RNTI a52b]Received RRC_DCCH_DATA_REQ from TASK_RRC_ENB: instance 0, rb_id 1, muiP 0, confirmP 0, mode 1
  403. [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01] RLC_AM_DATA_REQ size 44 Bytes,  NB SDU 1 current_sdu_index=0 next_sdu_index=1 conf 0 mui 0 vtA 0 vtS 0
  404. [RRC][N][eNB 0] Frame 409: received a DCCH 1 message on SRB 1 with Size 6 from UE a52b
  405. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Received on DCCH 1 RRC_DCCH_DATA_IND
  406. [SCTP][I][sctp_send_data] Successfully sent 51 bytes on stream 1 for assoc_id 15
  407. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  408. [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
  409. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  410. [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 28 received from port 36412, on stream 1, PPID 18
  411. [S1AP][I][s1ap_decode_s1ap_downlinknastransporties] Decoding message S1ap_DownlinkNASTransportIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:3150)
  412. [RRC][I][eNB 0] Received S1AP_DOWNLINK_NAS: ue_initial_id 1, eNB_ue_s1ap_id 420141
  413. [PDCP][I][FRAME 00000][eNB][MOD 00][RNTI a52b]Received RRC_DCCH_DATA_REQ from TASK_RRC_ENB: instance 0, rb_id 1, muiP 0, confirmP 0, mode 1
  414. [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01] RLC_AM_DATA_REQ size 10 Bytes,  NB SDU 2 current_sdu_index=1 next_sdu_index=2 conf 0 mui 0 vtA 1 vtS 1
  415. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  416. [SCTP][I][sctp_eNB_read_from_socket] [15][41] Msg of length 22 received from port 36412, on stream 1, PPID 18
  417. [S1AP][I][s1ap_decode_s1ap_uecontextreleasecommandies] Decoding message S1ap_UEContextReleaseCommandIEs (/home/oai/openairinterface5g/cmake_targets/lte_build_oai/build/CMakeFiles/R10.5/s1ap_decoder.c:5937)
  418. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Logical Channel DL-DCCH, Generate RRCConnectionRelease (bytes 3)
  419. [RRC][W]S1AP removed entry in hashtable s1ap_id2_s1ap_ids for eNB_ue_s1ap_id 420141
  420. [RRC][W]S1AP removed entry in hashtable initial_id2_s1ap_ids for ue_initial_id 1
  421. [S1AP][W][s1ap_ue_context_release_complete] Removed UE context eNB_ue_s1ap_id 420141
  422. [SCTP][I][sctp_send_data] Successfully sent 21 bytes on stream 1 for assoc_id 15
  423. [PDCP][I][FRAME 00000][eNB][MOD 00][RNTI a52b]Received RRC_DCCH_DATA_REQ from TASK_RRC_ENB: instance 0, rb_id 1, muiP 0, confirmP 0, mode 1
  424. [RLC][I][FRAME 00000][eNB][MOD 00][RNTI a52b][SRB AM 01] RLC_AM_DATA_REQ size 8 Bytes,  NB SDU 3 current_sdu_index=2 next_sdu_index=3 conf 0 mui 0 vtA 1 vtS 2
  425. [RRC][I]Removing UE a52b instance
  426. [RRC][W][eNB 0] Removing UE RNTI a52b
  427. MAC: remove UE 0 rnti a52b
  428. [MAC][I][rrc_mac_remove_ue] Removing UE 0 from Primary CC_id 0 (rnti a52b)
  429. [S1AP][W][s1ap_ue_context_release_req] Failed to find ue context associated with eNB ue s1ap id: 420141
  430. [S1AP][E][s1ap_eNB_task] Failed to find ue context associated with eNB ue s1ap id: 420141
  431. [RRC][I][FRAME 00000][eNB][MOD 00][RNTI a52b] Removed UE context
  432. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  433. [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32777
  434. [SCTP][I][sctp_eNB_flush_sockets] Found data for descriptor 41
  435. [SCTP][I][sctp_eNB_read_from_socket] Received notification for sd 41, type 32773
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top