Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.27-gentoo] (local build)
- Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: INTEL SSDSC2BF180A4 2.5 7MM 180GB
- Serial Number: CVDA512506VR1802GN
- LU WWN Device Id: 5 5cd2e4 04bfa2a7c
- Firmware Version: LG7i
- User Capacity: 180,045,766,656 bytes [180 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- TRIM Command: Available, deterministic
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Fri Apr 16 18:06:55 2021 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- See vendor-specific Attribute list for marginal Attributes.
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 4395) seconds.
- Offline data collection
- capabilities: (0x7f) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Abort Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 58) minutes.
- Conveyance self-test routine
- recommended polling time: ( 4) minutes.
- SCT capabilities: (0x0025) SCT Status supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 5 Reallocated_Sector_Ct 0x0032 100 100 010 Old_age Always - 0
- 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 5057 (157 100 0)
- 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2835
- 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0
- 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 2835
- 175 Program_Fail_Count_Chip 0x0032 100 000 010 Old_age Always In_the_past 0
- 176 Erase_Fail_Count_Chip 0x0032 100 000 010 Old_age Always In_the_past 0
- 177 Wear_Leveling_Count 0x0032 085 085 005 Old_age Always - 43502208
- 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 059 059 010 Old_age Always - 102
- 179 Used_Rsvd_Blk_Cnt_Tot 0x0032 059 059 010 Old_age Always - 4896
- 180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 079 079 010 Old_age Always - 9408
- 181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
- 182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
- 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 12
- 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
- 187 Reported_Uncorrect 0x0032 080 080 000 Old_age Always - 20
- 190 Airflow_Temperature_Cel 0x0032 032 069 000 Old_age Always - 32 (Min/Max 13/69)
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 2835
- 195 Hardware_ECC_Recovered 0x0032 120 120 000 Old_age Always - 0
- 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
- 225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 750609
- 226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 65535
- 227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always - 92
- 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 65535
- 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
- 233 Media_Wearout_Indicator 0x0032 088 088 000 Old_age Always - 0
- 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 750609
- 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 9166741
- 249 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 80085
- SMART Error Log not supported
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 2761 -
- # 2 Short offline Completed without error 00% 4 -
- # 3 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement