Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [2019-06-19 14:20:19] [Output] : ★ George Remington grabs the lift's remote from his belt and pushes down it's top button to raise the car
- [2019-06-19 14:20:28] [Output] : * George Remington presses the button on the ramp controls raising the car lift. *
- [2019-06-19 14:21:41] [Output] : ★ George Remington leans over to the floor and picks up his impact gun,going to the front left wheel of the car
- [2019-06-19 14:21:56] [Output] : ★ George Remington sits down on his knees and aim the lugnuts,starting up the impact gun
- [2019-06-19 14:22:15] [Output] : ★ George Remington would slowly get the lugnuts dettached and pockets them up
- [2019-06-19 14:22:47] [Output] : ★ George Remington then grabs the wheel in his both hands and places it down on the floor.
- [2019-06-19 14:23:11] [Output] : ★ As seen,the car would be curently running on a shock system suspension ((George Remington))
- [2019-06-19 14:23:26] [Output] : ★ George Remington goes to the driver's door and opens it up,pulling the hood's release
- [2019-06-19 14:23:42] [Output] : ★ George Remington further returns to the car's hood in order to open it up
- [2019-06-19 14:24:49] [Output] : ★ George Remington gets his hands under the car's hood and pushes the trigger,lifting the hood up and setting..
- [2019-06-19 14:24:55] [Output] : ★ ...it on the lock support arm ((George Remington))
- [2019-06-19 14:25:20] [Output] : ★ As the hood is raised,the top bolts of the shocks would now be visible ((George Remington))
- [2019-06-19 14:26:20] [Output] : ★ George Remington starts up the impact gun and removes the top bolt of the left shock,placing it on the fender
- [2019-06-19 14:26:33] [Output] : ★ George Remington then heads back to the empty hub in order to remove the bottom bolts
- [2019-06-19 14:27:30] [Output] : ★ George Remington starts up the impact gun and aims the bottom bolts,removing them
- [2019-06-19 14:27:49] [Output] : ★ George Remington then places the bolts down and then grabs the old shock in his hands,setting it down
- [2019-06-19 14:28:38] [Output] : ★ George Remington picks up a new front coilover from the set after and slides it back in place,alligning it
- [2019-06-19 14:29:58] [Output] : ★ George Remington picks up the bottom bolts and twists them back in place,using the impact gun to tighten down
- [2019-06-19 14:30:04] [Output] : ★ ...the bolts after. ((George Remington))
- [2019-06-19 14:30:20] [Output] : ★ George Remington stands back up after and grabs the top bolt from the fender
- [2019-06-19 14:30:39] [Output] : ★ George Remington twists the bolt back in it's place and further starts up the impact gun,tightening the bolt
- [2019-06-19 14:30:57] [Output] : ★ George Remington sits back down and grabs the wheel in his both hands,sliding it back into the hub
- [2019-06-19 14:31:43] [Output] : ★ George Remington then unpockets the lugnuts and screws them back in,tigthening them all down in a star...
- [2019-06-19 14:31:45] [Output] : ★ ...pattern ((George Remington))
- [2019-06-19 14:31:49] [Output] : * Timpul este 14:31:49
- [2019-06-19 14:32:07] [Output] : ★ George Remington stands back up after and heads to the other wheel,picking up the second front coilover
- [2019-06-19 14:33:38] [Output] : ★ George Remington sits down on his knees and places the coilover down,heading up to the lugnuts
- [2019-06-19 14:33:57] [Output] : ★ George Remington starts up the impact gun and removes the lugnuts in a row,pocketing them up
- [2019-06-19 14:34:34] [Output] : ★ George Remington then grabs the wheel in his both hands and sets it down on the floor
- [2019-06-19 14:34:52] [Output] : ★ George Remington aims the bottom bolts of the shock after and uses the impact gun to dettach both bolts...
- [2019-06-19 14:34:58] [Output] : ★ ...placing them down on the ground ((George Remington))
- [2019-06-19 14:35:04] [Output] : ★ George Remington stands up after and aims the top bolt
- [2019-06-19 14:35:20] [Output] : ★ George Remington uses his impact gun and dettaches the bolt,placing it on the fender
- [2019-06-19 14:35:55] [Output] : ★ George Remington then sits back down and grabs the old shock in his hands,placing it on the floor
- [2019-06-19 14:36:16] [Output] : ★ George Remington then picks up the the coilover and slides it back in place,positioning it.
- [2019-06-19 14:36:31] [Output] : ★ George Remington then picks the bottom bolts and twists them back in place,tightening them down
- [2019-06-19 14:36:48] [Output] : ★ George Remington stands back up after and twists the top bolt in as well,tightening it down
- [2019-06-19 14:37:01] [Output] : ★ George Remington then goes back down and grabs the wheel in his both hands,sliding it in place
- [2019-06-19 14:37:21] [Output] : ★ George Remington then unpockets the lugnuts and puts them back into their holes,tigthening them in a star...
- [2019-06-19 14:37:23] [Output] : ★ ...pattern ((George Remington))
- [2019-06-19 14:37:44] [Output] : ★ George Remington then picks up one of the rear coilovers from the set and heads to the rear wheel
- [2019-06-19 14:38:05] [Output] : ★ George Remington places the coilover down and heads up to the car's trunk pushing it's button and opening it
- [2019-06-19 14:38:35] [Output] : ★ George Remington drags the floor mat all the way to the middle of the trunk and lets the bolts exposed after
- [2019-06-19 14:39:36] [Output] : ★ George Remington then sits down near the wheel and uses his impact gun to dettach the lugnuts in a row
- [2019-06-19 14:40:03] [Output] : ★ George Remington then pockets up the lugnuts and grabs the wheel out of the hub,placing it down on the floor
- [2019-06-19 14:41:43] [Output] : ★ George Remington then aims the bottom bolts of the shock and uses the impact gun to remove them
- [2019-06-19 14:41:58] [Output] : ★ George Remington sets the bolts down on the ramp and then stands back up,dettaching the top bolt as well
- [2019-06-19 14:42:10] [Output] : ★ George Remington then goes back to the shock and drags it out,placing it on the floor
- [2019-06-19 14:42:29] [Output] : ★ George Remington takes up the new coilover and slides it in place,alligning it over the holes
- [2019-06-19 14:42:50] [Output] : ★ George Remington then grabs the bottom bolts from the ramp and twists them back in,tigthening them down
- [2019-06-19 14:43:06] [Output] : ★ George Remington then stands up into the trunk and grabs the top bolt,tightening it down as well
- [2019-06-19 14:43:21] [Output] : ★ George Remington returns back down again and grabs the wheel in his both hands,sliding it into the hub
- [2019-06-19 14:44:02] [Output] : ★ George Remington then unpockets the lugnuts and sets them back into their holes,tightening them down in...
- [2019-06-19 14:44:07] [Output] : ★ ...a star pattern ((George Remington))
- [2019-06-19 14:44:25] [Output] : ★ George Remington stands up and makes his way to the last wheel,picking up the last coilover in his way
- [2019-06-19 14:44:43] [Output] : ★ George Remington sits down and places the coilover on the floor,aiming the lugnuts
- [2019-06-19 14:44:58] [Output] : ★ George Remington starts the impact gun and removes all the lugnuts in a row,pocketing them after
- [2019-06-19 14:45:14] [Input] : me then grabs up the wheel in his both hands and slides it out,placing it on the floor
- [2019-06-19 14:45:14] [Output] : ★ George Remington then grabs up the wheel in his both hands and slides it out,placing it on the floor
- [2019-06-19 14:45:38] [Input] : ★ aims the bottom bolts of the shock after and starts up the impact gun,using it to remove the two bolts
- [2019-06-19 14:46:35] [Input] : ★ then places the bolts down on the ramp and heads up into the trunk,removing the top bolt as well
- [2019-06-19 14:46:35] [Output] : ★ George Remington then places the bolts down on the ramp and heads up into the trunk,removing the top bolt as well
- [2019-06-19 14:46:58] [Input] : ★ then goes back down and grabs the old shock in his hands,dragging it out and placing it down on the floor
- [2019-06-19 14:47:33] [Output] : ★ George Remington then heads back down and grabs the old shock out,placing it down on the floor
- [2019-06-19 14:47:46] [Output] : ★ George Remington picks up the new coilover after and slides it back in place,positioning it
- [2019-06-19 14:48:10] [Output] : ★ George Remington then grabs the bottom bolts from the ramp and twists them into the holes,using the impact..
- [2019-06-19 14:48:14] [Output] : ★ ...gun to tighten them down ((George Remington))
- [2019-06-19 14:48:30] [Output] : ★ George Remington then heads up into the trunk and attaches the top bolt back to the coilover,tightening it do
- [2019-06-19 14:48:33] [Output] : George Remington: (( down* ))
- [2019-06-19 14:48:49] [Output] : ★ George Remington then grabs the wheel in his hands and slides it back into the hub,unpocketing the...
- [2019-06-19 14:49:00] [Output] : ★ ...lugnuts and tightening them back down in a star pattern ((George Remington))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement